IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The "failure" variable is used without being initialized. It should be
set to false.
Fixes: 8cbf74149903 ("i40e, xsk: move buffer allocation out of the Rx processing loop")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix MAC setting flow for the PF driver.
Update the unicast VF's MAC address in VF structure if it is
a new setting in i40e_vc_add_mac_addr_msg.
When unicast MAC address gets deleted, record that and
set the new unicast MAC address that is already waiting in the filter
list. This logic is based on the order of messages arriving to
the PF driver.
Without this change the MAC address setting was interpreted
incorrectly in the following use cases:
1) Print incorrect VF MAC or zero MAC
ip link show dev $pf
2) Don't preserve MAC between driver reload
rmmod iavf; modprobe iavf
3) Update VF MAC when macvlan was set
ip link add link $vf address $mac $vf.1 type macvlan
4) Failed to update mac address when VF was trusted
ip link set dev $vf address $mac
This includes all other configurations including above commands.
Fixes: f657a6e1313b ("i40e: Fix VF driver MAC address configuration")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Set all EHL/TGL phy_addr to -1 so that the driver will automatically
detect it at run-time by probing all the possible 32 addresses.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20201106094341.4241-1-vee.khee.wong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_BRIDGE=m the compilation fails:
ld: drivers/net/ethernet/marvell/prestera/prestera_switchdev.o: in function `prestera_bridge_port_event':
prestera_switchdev.c:(.text+0x2ebd): undefined reference to `br_vlan_enabled'
in case the driver is statically enabled.
Fix it by adding 'BRIDGE || BRIDGE=n' dependency.
Fixes: e1189d9a5fbe ("net: marvell: prestera: Add Switchdev driver implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201106161128.24069-1-vadym.kochan@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl+kXcMACgkQSD+KveBX
+j61Zgf+IBCrevYpytPWmbrLnpWP6sVNkg0Plw8cmhRcLCCeN8mEMPIrhNDysmJu
WOen+yVz7K65WEA5LQ1nUM+VY8PdI3sAre81rTrfyEm2Nkd0aO22BoWSESrNZowf
XDNwn4lEJ5MToxvozfV158Gi921EwGtB/JKS6If7Cyjf+Ok8+ie8ayGfvPi7SiNK
+2Bnai7RJSeYYt8xZjvvg17b1+ZbTeoJF/waEXpFsM/BWVKg5ZOawcfRKr4MuvEJ
4WDzCjdaoeDZ8T6cppuWnznpoAeEf6Avq5DG/wMnUQxXRk9X5i043jr1Iydo5Bj9
MvE31Mg9v15CecaKBldVs4cMSv86gw==
=pwvB
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-11-03
v1->v2:
- Fix fixes line tag in patch #1
- Toss ktls refcount leak fix, Maxim will look further into the root
cause.
- Toss eswitch chain 0 prio patch, until we determine if it is needed
for -rc and net.
* tag 'mlx5-fixes-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix incorrect access of RCU-protected xdp_prog
net/mlx5e: Fix VXLAN synchronization after function reload
net/mlx5: E-switch, Avoid extack error log for disabled vport
net/mlx5: Fix deletion of duplicate rules
net/mlx5e: Use spin_lock_bh for async_icosq_lock
net/mlx5e: Protect encap route dev from concurrent release
net/mlx5e: Fix modify header actions memory leak
====================
Link: https://lore.kernel.org/r/20201105202129.23644-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8125B has same or similar short packet hw padding bug as RTL8168evl.
The main workaround has been extended accordingly, however we have to
disable also hw checksumming for short packets on affected new chip
versions. Instead of checking for an affected chip version let's
simply disable hw checksumming for short packets in general.
v2:
- remove the version checks and disable short packet hw csum in general
- reflect this in commit title and message
Fixes: 0439297be951 ("r8169: add support for RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/7fbb35f0-e244-ef65-aa55-3872d7d38698@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The caller of rtl8169_tso_csum_v2() frees the skb if false is returned.
eth_skb_pad() internally frees the skb on error what would result in a
double free. Therefore use __skb_put_padto() directly and instruct it
to not free the skb on error.
Fixes: b423e9ae49d7 ("r8169: fix offloaded tx checksum for small packets.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f7e68191-acff-9ded-4263-c016428a8762@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the gcc warning:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation]
2673 | for (i = 0; i < n; ++i) \
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1604467444-23043-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MDIO spec does not require an MDC at all times, only when MDIO
transactions are occurring. This patch allows the xilinx_axienet
driver to disable the MDC when not in use, and re-enable it when
needed. It also simplifies the driver by removing MDC disable
and enable in device reset sequence.
Signed-off-by: Clayton Rayment <clayton.rayment@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce helper functions to enable/disable MDIO interface clock. This
change serves a preparatory patch for the coming feature to dynamically
control the management bus clock.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 16b5f5ce351f8709a6b518cc3cbf240c378305bf
where it restructures do_reset. There are patches being tested that
would require major rework if this is committed first.
We will resend this after the other patches have been applied.
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20201106191745.1679846-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
and netfilter subtrees.
Current release - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous release - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even
if inner packet has IP_DF (don't fragment) set in its header
(when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break
gso support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous release - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need
to be dropped
- always clone the skbs to make sure they have a reference on
the socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5R2w
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
This series includes updates to mlx5 software steering component.
1) Few improvements in the DR area, such as removing unneeded checks,
renaming to better general names, refactor in some places, etc.
2) Software steering (DR) Memory management improvements
This patch series contains SW Steering memory management improvements:
using buddy allocator instead of an existing bucket allocator, and
several other optimizations.
The buddy system is a memory allocation and management algorithm
that manages memory in power of two increments.
The algorithm is well-known and well-described, such as here:
https://en.wikipedia.org/wiki/Buddy_memory_allocation
Linux uses this algorithm for managing and allocating physical pages,
as described here:
https://www.kernel.org/doc/gorman/html/understand/understand009.html
In our case, although the algorithm in principal is similar to the
Linux physical page allocator, the "building blocks" and the circumstances
are different: in SW steering, buddy allocator doesn't really allocates
a memory, but rather manages ICM (Interconnect Context Memory) that was
previously allocated and registered.
The ICM memory that is used in SW steering is always power
of 2 (order), so buddy system is a good fit for this.
Patches in this series:
[PATH 4] net/mlx5: DR, Add buddy allocator utilities
This patch adds a modified implementation of a well-known buddy allocator,
adjusted for SW steering needs: the algorithm in principal is similar to
the Linux physical page allocator, but in our case buddy allocator doesn't
really allocate a memory, but rather manages ICM memory that was previously
allocated and registered.
[PATH 5] net/mlx5: DR, Handle ICM memory via buddy allocation instead of bucket management
This patch changes ICM management of SW steering to use buddy-system mechanism
Instead of the previous bucket management.
[PATH 6] net/mlx5: DR, Sync chunks only during free
This patch makes syncing happen only when freeing memory chunks.
[PATH 7] net/mlx5: DR, ICM memory pools sync optimization
This patch adds tracking of pool's "hot" memory and makes the
check whether steering sync is required much shorter and faster.
[PATH 8] net/mlx5: DR, Free buddy ICM memory if it is unused
This patch adds tracking buddy's used ICM memory,
and frees the buddy if all its memory becomes unused.
3) Misc code cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl+kW/sACgkQSD+KveBX
+j7pRwf+KH6vIkwKlt0I2cYUmUINAkz0o1E82wXGx5Q81iMJLeIeMPKiatai6/0r
BIYD8t8oagOVw5OU+H9DbVIR47wz6pB90bkQIrIJk0S3ocVcDfLlN0ssbwCdEDlH
jj56SB6jjVVj1LlTXSVfUrXEKJ2FBjTxPbNtVL/NLW0GQkoJM5RaYjK++ZB58o+O
YI1Gb2w+FT5vVHdRVxs/2a/NTy71VQOrYctkhql4/8P0SsstPvhgOD/oRU26l8Il
Qpl68H/0N9KM04SlOlD91AwaWhPEIBP1qFSgRnfStmqxAfQlAfqajOoSntK8Vkz0
0yRF7pVLELhzxx+IR/W9Vpdf7uzjeA==
=rQcg
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-11-03
This series includes updates to mlx5 software steering component.
1) Few improvements in the DR area, such as removing unneeded checks,
renaming to better general names, refactor in some places, etc.
2) Software steering (DR) Memory management improvements
This patch series contains SW Steering memory management improvements:
using buddy allocator instead of an existing bucket allocator, and
several other optimizations.
The buddy system is a memory allocation and management algorithm
that manages memory in power of two increments.
The algorithm is well-known and well-described, such as here:
https://en.wikipedia.org/wiki/Buddy_memory_allocation
Linux uses this algorithm for managing and allocating physical pages,
as described here:
https://www.kernel.org/doc/gorman/html/understand/understand009.html
In our case, although the algorithm in principal is similar to the
Linux physical page allocator, the "building blocks" and the circumstances
are different: in SW steering, buddy allocator doesn't really allocates
a memory, but rather manages ICM (Interconnect Context Memory) that was
previously allocated and registered.
The ICM memory that is used in SW steering is always power
of 2 (order), so buddy system is a good fit for this.
Patches in this series:
[PATH 4] net/mlx5: DR, Add buddy allocator utilities
This patch adds a modified implementation of a well-known buddy allocator,
adjusted for SW steering needs: the algorithm in principal is similar to
the Linux physical page allocator, but in our case buddy allocator doesn't
really allocate a memory, but rather manages ICM memory that was previously
allocated and registered.
[PATH 5] net/mlx5: DR, Handle ICM memory via buddy allocation instead of bucket management
This patch changes ICM management of SW steering to use buddy-system mechanism
Instead of the previous bucket management.
[PATH 6] net/mlx5: DR, Sync chunks only during free
This patch makes syncing happen only when freeing memory chunks.
[PATH 7] net/mlx5: DR, ICM memory pools sync optimization
This patch adds tracking of pool's "hot" memory and makes the
check whether steering sync is required much shorter and faster.
[PATH 8] net/mlx5: DR, Free buddy ICM memory if it is unused
This patch adds tracking buddy's used ICM memory,
and frees the buddy if all its memory becomes unused.
3) Misc code cleanups
* tag 'mlx5-updates-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: Replace in_irq() usage
net/mlx5: Cleanup kernel-doc warnings
net/mlx4: Cleanup kernel-doc warnings
net/mlx5e: Validate stop_room size upon user input
net/mlx5: DR, Free unused buddy ICM memory
net/mlx5: DR, ICM memory pools sync optimization
net/mlx5: DR, Sync chunks only during free
net/mlx5: DR, Handle ICM memory via buddy allocation instead of buckets
net/mlx5: DR, Add buddy allocator utilities
net/mlx5: DR, Rename matcher functions to be more HW agnostic
net/mlx5: DR, Rename builders HW specific names
net/mlx5: DR, Remove unused member of action struct
====================
Link: https://lore.kernel.org/r/20201105201242.21716-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rq->xdp_prog is RCU-protected and should be accessed only with
rcu_access_pointer for the NULL check in mlx5e_poll_rx_cq.
rq->xdp_prog may change on the fly only from one non-NULL value to
another non-NULL value, so the checks in mlx5e_xdp_handle and
mlx5e_poll_rx_cq will have the same result during one NAPI cycle,
meaning that no additional synchronization is needed.
Fixes: fe45386a2082 ("net/mlx5e: Use RCU to protect rq->xdp_prog")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
During driver reload, perform firmware tear-down which results in
firmware losing the configured VXLAN ports. These ports are still
available in the driver's database. Fix this by cleaning up driver's
VXLAN database in the nic unload flow, before firmware tear-down. With
that, minimize mlx5_vxlan_destroy() to remove only what was added in
mlx5_vxlan_create() and warn on leftover UDP ports.
Fixes: 18a2b7f969c9 ("net/mlx5: convert to new udp_tunnel infrastructure")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When E-switch vport is disabled, querying its hardware address is
unsupported.
Avoid setting extack error log message in such case.
Fixes: f099fde16db3 ("net/mlx5: E-switch, Support querying port function mac address")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When a rule is duplicated, the refcount of the rule is increased so only
the second deletion of the rule should cause destruction of the FTE.
Currently, the FTE will be destroyed in the first deletion of rule since
the modify_mask will be 0.
Fix it and call to destroy FTE only if all the rules (FTE's children)
have been removed.
Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
async_icosq_lock may be taken from softirq and non-softirq contexts. It
requires protection with spin_lock_bh, otherwise a softirq may be
triggered in the middle of the critical section, and it may deadlock if
it tries to take the same lock. This patch fixes such a scenario by
using spin_lock_bh to disable softirqs on that CPU while inside the
critical section.
Fixes: 8d94b590f1e4 ("net/mlx5e: Turn XSK ICOSQ into a general asynchronous one")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In functions mlx5e_route_lookup_ipv{4|6}() route_dev can be arbitrary net
device and not necessary mlx5 eswitch port representor. As such, in order
to ensure that route_dev is not destroyed concurrent the code needs either
explicitly take reference to the device before releasing reference to
rtable instance or ensure that caller holds rtnl lock. First approach is
chosen as a fix since rtnl lock dependency was intentionally removed from
mlx5 TC layer.
To prevent unprotected usage of route_dev in encap code take a reference to
the device before releasing rt. Don't save direct pointer to the device in
mlx5_encap_entry structure and use ifindex instead. Modify users of
route_dev pointer to properly obtain the net device instance from its
ifindex.
Fixes: 61086f391044 ("net/mlx5e: Protect encap hash table with mutex")
Fixes: 6707f74be862 ("net/mlx5e: Update hw flows when encap source mac changed")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Modify header actions are allocated during parse tc actions and only
freed during the flow creation, however, on error flow the allocated
memory is wrongly unfreed.
Fix this by calling dealloc_mod_hdr_actions in __mlx5e_add_fdb_flow
and mlx5e_add_nic_flow error flow.
Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Fixes: 2f4fe4cab073 ("net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5_eq_async_int() uses in_irq() to decide whether eq::lock needs to be
acquired and released with spin_[un]lock() or the irq saving/restoring
variants.
The usage of in_*() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
seperated or the context be conveyed in an argument passed by the caller,
which usually knows the context.
mlx5_eq_async_int() knows the context via the action argument already so
using it for the lock variant decision is a straight forward replacement
for in_irq().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
$ git ls-files *.[ch] | egrep drivers/net/ethernet/mellanox/ | \
xargs scripts/kernel-doc -none
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:57:
warning: Enum value 'MLX5_FPGA_ACCESS_TYPE_I2C' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:57:
warning: Enum value 'MLX5_FPGA_ACCESS_TYPE_DONTCARE' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:118:
warning: Function parameter or member 'cb_arg' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:160:
warning: Function parameter or member 'conn' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:160:
warning: Excess function parameter 'fdev' description ...
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Stop room is a space that may be taken by WQEs in the SQ during a packet
transmit. It is used to check if next packet has enough room in the SQ.
Stop room guarantees this packet can be served and if not, the queue is
stopped, so no more packets are passed to the driver until it's ready.
Currently, stop_room size is calculated and validated upon tx queues
allocation. This makes it impossible to know if user provided valid
input for certain parameters when interface is down.
Instead, store stop_room in mlx5e_sq_param and create
mlx5e_validate_params(), to validate its fields upon user input even
when the interface is down.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Track buddy's used ICM memory, and free it if all
of the buddy's memory bacame unused.
Do this only for STEs.
MODIFY_ACTION buddies are much smaller, so in case there
is a large amount of modify_header actions, which result
in large amount of MODIFY_ACTION buddies, doing this
cleanup during sync will result in performance hit while
not freeing significant amount of memory.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Track the pool's hot ICM memory when freeing/allocating
chunk, so that when checking if the sync is required, just
check if the pool hot memory has reached the sync threshold.
Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When freeing chunks, we want to sync the steering
so that all the "hot" memory will be written to ICM
and all the chunks that are in the hot_list will be
actually destroyed.
When allocating from the pool, we don't have a need
to sync the steering, as we're not freeing anything,
and sync might just hurt the performance in terms of
flow-per-second offloaded.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Till now in order to manage the ICM memory we used bucket
mechanism, which kept a bucket per specified size (sizes were
between 1 block to 2^21 blocks).
Now changing that with buddy-system mechanism, which gives us much
more flexible way to manage the ICM memory.
Its biggest advantage over the bucket is by using the same ICM memory
area for all the sizes of blocks, which reduces the memory consumption.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add implementation of SW Steering variation of buddy allocator.
The buddy system for ICM memory uses 2 main data structures:
- Bitmap per order, that keeps the current state of allocated
blocks for this order
- Indicator for the number of available blocks per each order
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove flex parser from the matcher function names since
the matcher should not be aware of such HW specific details.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will support multiple STE versions.
The existing naming is not suitable for newer versions.
Removed the HW specific details and renamed with a more
general names.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Check for corner case of port_init failure before using
the port_info pointer.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
Fixes: 0439297be951 ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <wgh@torlan.ru>
Tested-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tx checksumming has been defeatured and completely removed
from the h/w reference manual. Made a little cleanup for the
TSE case as this is complementary code.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201103140213.3294-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
patch adds a logic to utilize multiple queues to process requests.
The queue selection logic uses a round-robin distribution technique
using a counter.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102162832.22344-1-vinay.yadav@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An incorrect sizeof() is being used, sizeof(u64 *) is not correct,
it should be sizeof(*sq->sqb_ptrs).
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201102134601.698436-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver uses in_irq() + in_serving_softirq() magic to decide if NAPI
scheduling is required or packet processing.
The usage of in_*() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
separated or the context be conveyed in an argument passed by the caller,
which usually knows the context.
Use the `sched_napi' argument passed by the callback. It is set true if
called from the interrupt handler and NAPI should be scheduled.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
dpaa_eth_napi_schedule() and caam_qi_napi_schedule() schedule NAPI if
invoked from:
- Hard interrupt context
- Any context which is not serving soft interrupts
Any context which is not serving soft interrupts includes hard interrupts
so the in_irq() check is redundant. caam_qi_napi_schedule() has a comment
about this:
/*
* In case of threaded ISR, for RT kernels in_irq() does not return
* appropriate value, so use in_serving_softirq to distinguish between
* softirq and irq contexts.
*/
if (in_irq() || !in_serving_softirq())
This has nothing to do with RT. Even on a non RT kernel force threaded
interrupts run obviously in thread context and therefore in_irq() returns
false when invoked from the handler.
The extension of the in_irq() check with !in_serving_softirq() was there
when the drivers were added, but in the out of tree FSL BSP the original
condition was in_irq() which got extended due to failures on RT.
The usage of in_xxx() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
separated or the context be conveyed in an argument passed by the caller,
which usually knows the context. Right he is, the above construct is
clearly showing why.
The following callchains have been analyzed to end up in
dpaa_eth_napi_schedule():
qman_p_poll_dqrr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
portal_isr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
Both need to schedule NAPI.
The crypto part has another code path leading up to this:
kill_fq()
empty_retired_fq()
qman_p_poll_dqrr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
kill_fq() is called from task context and ends up scheduling NAPI, but
that's pointless and an unintended side effect of the !in_serving_softirq()
check.
The code path:
caam_qi_poll() -> qman_p_poll_dqrr()
is invoked from NAPI and I *assume* from crypto's NAPI device and not
from qbman's NAPI device. I *guess* it is okay to skip scheduling NAPI
(because this is what happens now) but could be changed if it is wrong
due to `budget' handling.
Add an argument to __poll_portal_fast() which is true if NAPI needs to be
scheduled. This requires propagating the value to the caller including
`qman_cb_dqrr' typedef which is used by the dpaa and the crypto driver.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert XS <herbert@gondor.apana.org.au>
Cc: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
This is the 3rd revision of the patch fix for potential null pointer dereference
with lan743x card.
The simpliest way to reproduce: boot with bare lan743x and issue "ethtool ethN"
commant where ethN is the interface with lan743x card. Example:
$ sudo ethtool eth7
dmesg:
[ 103.510336] BUG: kernel NULL pointer dereference, address: 0000000000000340
...
[ 103.510836] RIP: 0010:phy_ethtool_get_wol+0x5/0x30 [libphy]
...
[ 103.511629] Call Trace:
[ 103.511666] lan743x_ethtool_get_wol+0x21/0x40 [lan743x]
[ 103.511724] dev_ethtool+0x1507/0x29d0
[ 103.511769] ? avc_has_extended_perms+0x17f/0x440
[ 103.511820] ? tomoyo_init_request_info+0x84/0x90
[ 103.511870] ? tomoyo_path_number_perm+0x68/0x1e0
[ 103.511919] ? tty_insert_flip_string_fixed_flag+0x82/0xe0
[ 103.511973] ? inet_ioctl+0x187/0x1d0
[ 103.512016] dev_ioctl+0xb5/0x560
[ 103.512055] sock_do_ioctl+0xa0/0x140
[ 103.512098] sock_ioctl+0x2cb/0x3c0
[ 103.512139] __x64_sys_ioctl+0x84/0xc0
[ 103.512183] do_syscall_64+0x33/0x80
[ 103.512224] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 103.512274] RIP: 0033:0x7f54a9cba427
...
Previous versions can be found at:
v1:
initial version
https://lkml.org/lkml/2020/10/28/921
v2:
do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip
the call of phy_ethtool_set_wol() instead.
https://lkml.org/lkml/2020/10/31/380
v3:
in function lan743x_ethtool_set_wol:
use ternary operator instead of if-else sentence (review by Markus Elfring)
return -ENETDOWN insted of -EIO (review by Andrew Lunn)
Signed-off-by: Sergej Bauer <sbauer@blackbox.su>
Link: https://lore.kernel.org/r/20201101223556.16116-1-sbauer@blackbox.su
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had to remove flag IRQF_NO_THREAD because it conflicts with shared
interrupts in case legacy interrupts are used. Following up on the
linked discussion set IRQF_NO_THREAD if MSI or MSI-X is used, because
both guarantee that interrupt won't be shared.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://www.spinics.net/lists/netdev/msg695341.html
Link: https://lore.kernel.org/r/446cf5b8-dddd-197f-cb96-66783141ade4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lowest number of tx descriptors used in the vendor drivers is 256 in
r8169. r8101/r8168/r8125 use 1024 what seems to be the hw limit. Stay
on the safe side and go with 256, same as number of rx descriptors.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a52a6de4-f792-5038-ae2f-240d3b7860eb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for support of XM router implementation which uses
different registers to work with trees and FIB entries, introduce
a structure to hold low-level ops and implement tree manipulation
register ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a couple of registers used to manipulate LPM trees on XM:
The XRALTA is used to allocate the XLT LPM trees.
The XRALST is used to set and query the structure of an XLT LPM tree.
The XRALTB register is used to bind virtual router and protocol to
an allocated LPM tree.
Since the XM registers are identical to the legacy router registers
with a fixed offset, re-use their pack functions.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b27507bb59ed ("net/ibmvnic: unlock rtnl_lock in reset so
linkwatch_event can run") introduced do_change_param_reset function to
solve the rtnl lock issue. Majority of the code in do_change_param_reset
duplicates do_reset. Also, we can handle the rtnl lock issue in do_reset
itself. Hence merge do_change_param_reset back into do_reset to clean up
the code.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201031094645.17255-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
