IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch fixes two lines in which the rx_offset received by the device
wasn't taken into account:
- prefetch function:
In our driver the copied data would reside in
rx_info->page + rx_headroom + rx_offset
so the prefetch function is changed accordingly.
- setting page_offset to zero for descriptors > 1:
for every descriptor but the first, the rx_offset is zero. Hence
the page_offset value should be set to rx_headroom.
The previous implementation changed the value of rx_info after
the descriptor was added to the SKB (essentially providing wrong
page offset).
Fixes: 68f236df93a9 ("net: ena: add support for the rx offset feature")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA driver uses the readless mechanism, which uses DMA, to find
out what the DMA mask is supposed to be.
If DMA is used without setting the dma_mask first, it causes the
Intel IOMMU driver to think that ENA is a 32-bit device and therefore
disables IOMMU passthrough permanently.
This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48
before readless initialization in
ena_device_init()->ena_com_mmio_reg_read_request_init(),
which is large enough to workaround the intel_iommu issue.
DMA mask is set again to the correct value after it's received from the
device after readless is initialized.
The patch also changes the driver to use dma_set_mask_and_coherent()
function instead of the two pci_set_dma_mask() and
pci_set_consistent_dma_mask() ones. Both methods achieve the same
effect.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Mike Cui <mikecui@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After request id is checked in validate_rx_req_id() its value is still
used in the line
rx_ring->free_ids[next_to_clean] =
rx_ring->ena_bufs[i].req_id;
even if it was found to be out-of-bound for the array free_ids.
The patch moves the request id to an earlier stage in the napi routine and
makes sure its value isn't used if it's found out-of-bounds.
Fixes: 30623e1ed116 ("net: ena: avoid memory access violation by validating req_id properly")
Signed-off-by: Ido Segev <idose@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Build skb_shared_info on mvneta_rx_swbm stack and sync it to xdp_buff
skb_shared_info area only on the last fragment. Leftover cache miss in
mvneta_swbm_rx_frame will be addressed introducing mb bit in
xdp_buff/xdp_frame struct
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass skb_shared_info pointer from mvneta_xdp_put_buff caller. This is a
preliminary patch to reduce accesses to skb_shared_info area and reduce
cache misses.
Remove napi parameter in mvneta_xdp_put_buff signature since it is always
run in NAPI context
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tx/Rx FIFO is a HW resource limited by total size, but shared
by all ports of same CP110 and impacting port-performance.
Do not divide the FIFO for ports which are not enabled in DTS,
so active ports could have more FIFO.
No change in FIFO allocation if all 3 ports on the communication
processor enabled in DTS.
The active port mapping should be done in probe before FIFO-init.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/1606154073-28267-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpaa2 driver depends on devlink, so it should select
NET_DEVLINK in order to fix compile errors, such as:
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.o: in function `dpaa2_eth_rx_err':
dpaa2-eth.c:(.text+0x3cec): undefined reference to `devlink_trap_report'
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-devlink.o: in function `dpaa2_eth_dl_info_get':
dpaa2-eth-devlink.c:(.text+0x160): undefined reference to `devlink_info_driver_name_put'
Fixes: ceeb03ad8e22 ("dpaa2-eth: add basic devlink support")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201123163553.1666476-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Register with devlink the blackhole_nexthop trap so that mlxsw will be
able to report packets dropped due to a blackhole nexthop.
The internal trap identifier is "DISCARD_ROUTER3", which traps packets
dropped in the adjacency table.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for blackhole nexthops by programming them to the adjacency
table with a discard action.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two are the same, but for blackhole nexthops we will not have an
associated neighbour struct, so resolve the RIF from the nexthop struct
itself instead.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the driver creates a loopback RIF during its initialization, it
can be used to program the adjacency entries for unresolved nexthops
instead of other RIFs. The loopback RIF is guaranteed to exist for the
entire life time of the driver, unlike other RIFs that come and go.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unresolved nexthops are currently written to the adjacency table with a
discard action. Packets hitting such entries are trapped to the CPU via
the 'DISCARD_ROUTER3' trap which can be enabled or disabled on demand,
but is always enabled in order to ensure the kernel can resolve the
unresolved neighbours.
This trap will be needed for blackhole nexthops support. Therefore, move
unresolved nexthops to explicitly program the adjacency entries with a
trap action and a different trap identifier, 'RTR_EGRESS0'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up until now RIFs (router interfaces) were created on demand (e.g.,
when an IP address was added to a netdev). However, sometimes the device
needs to be provided with a RIF when one might not be available.
For example, adjacency entries that drop packets need to be programmed
with an egress RIF despite the RIF not being used to forward packets.
Create such a RIF during initialization so that it could be used later
on to support blackhole nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing IPv6 forwarding, there is an expectation that SKBs
will have some headroom. When forwarding a packet from the aquantia
driver, this does not always happen, triggering a kernel warning.
aq_ring.c has this code (edited slightly for brevity):
if (buff->is_eop && buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) {
skb = build_skb(aq_buf_vaddr(&buff->rxdata), AQ_CFG_RX_FRAME_MAX);
} else {
skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE);
There is a significant difference between the SKB produced by these
2 code paths. When napi_alloc_skb creates an SKB, there is a certain
amount of headroom reserved. However, this is not done in the
build_skb codepath.
As the hardware buffer that build_skb is built around does not
handle the presence of the SKB header, this code path is being
removed and the napi_alloc_skb path will always be used. This code
path does have to copy the packet header into the SKB, but it adds
the packet data as a frag.
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Lincoln Ramsay <lincoln.ramsay@opengear.com>
Link: https://lore.kernel.org/r/MWHPR1001MB23184F3EAFA413E0D1910EC9E8FC0@MWHPR1001MB2318.namprd10.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver uses a normal timer for TX coalescing, which means that the
with the default tx-usecs of 1000 microseconds the cleanups actually
happen 10 ms or more later with HZ=100. This leads to very low
througput with TCP when bridged to a slow link such as a 4G modem. Fix
this by using an hrtimer instead.
On my ARM platform with HZ=100 and the default TX coalescing settings
(tx-frames 25 tx-usecs 1000), with "tc qdisc add dev eth0 root netem
delay 60ms 40ms rate 50Mbit" run on the server, netperf's TCP_STREAM
improves from ~5.5 Mbps to ~100 Mbps.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20201120150208.6838-1-vincent.whitchurch@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lack of validation could lead to out-of-bound reads and information
leaks (cf. usage of nvdev->chan_table[]). Check that the number of
allocated sub-channels fits into the expected range.
Suggested-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201118153310.112404-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Unused structure ath11k_vdev_stop_status is removed.
'ath11k_mac_get_ar_vdev_stop_status' api has been replaced
with 'ath11k_mac_get_ar_by_vdev_id' inside vdev_stopped_event.
Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605514143-17652-4-git-send-email-mkenna@codeaurora.org
Peer creation in firmware fails, if last peer deletion
is still in progress.
Hence, add wait for the event after deleting every peer
from host driver to synchronize with firmware.
Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605514143-17652-3-git-send-email-mkenna@codeaurora.org
When the interface is added immediately after removing the
interface, vdev deletion in firmware might not have been
completed.
Hence, add vdev_delete_resp_event and wait_event_timeout
to synchronize with firmware.
Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605514143-17652-2-git-send-email-mkenna@codeaurora.org
Refactoring "PF still resetting" and changing "Failed
to add vlan id" to "Vlan id is not added"
messages because previous version looked like a bug
- it informed about changes that worked as
designed but might confuse users
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the virtual link state was set to "enable" ethtool would report
link speed as 40000Mb/s regardless of the underlying device.
Report the correct link speed.
Example from a XXV710 NIC.
Before:
$ ip link set ens3f0 vf 0 state auto
$ ethtool enp8s2 | grep Speed
Speed: 25000Mb/s
$ ip link set ens3f0 vf 0 state enable
$ ethtool enp8s2 | grep Speed
Speed: 40000Mb/s
After:
$ ip link set ens3f0 vf 0 state auto
$ ethtool enp8s2 | grep Speed
Speed: 25000Mb/s
$ ip link set ens3f0 vf 0 state enable
$ ethtool enp8s2 | grep Speed
Speed: 25000Mb/s
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove a redundant assignment of the software ring pointer in the i40e
driver. The variable is assigned twice with no use in between, so just
get rid of the first occurrence.
Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
Signed-off-by: Marek Majtyka <marekx.majtyka@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Add the missing destroy_workqueue() before return from
cw1200_init_common in the error handling case.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119070842.1011-1-miaoqinglang@huawei.com
In rtl8723e_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 531:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 534, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 535:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015218.12220-1-baijiaju1990@gmail.com
In rtl92de_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 667:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 669, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 670:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015205.12162-1-baijiaju1990@gmail.com
In rtl92ce_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 530:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 533, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 534:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015151.12110-1-baijiaju1990@gmail.com
In rtl88ee_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 677:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 680, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 681:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015127.12033-1-baijiaju1990@gmail.com
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201117160958.GA18807@embeddedor
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 17ff2c794f39 ("rsi: reset device changes for 9116")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605582454-39649-1-git-send-email-zhangchangzhong@huawei.com
The left-hand side of the assignment from cpu_to_le32() should be of
type __le32. This commit clears the warning reported by sparse when
building with C=1 CF="-D__CHECK_ENDIAN__".
Fixes: d56fd83cf99c ("brcmfmac: fix SDIO access for big-endian host")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Remi Depommier <rde@setrix.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201116001639.31958-1-rde@setrix.com
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: b7da53cd6cd1 ("qtnfmac_pcie: use single PCIe driver for all platforms")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201114123347.29632-1-wanghai38@huawei.com
The variable u4tmp is overwritten by the following call and the assignment
is useless, so remove it.
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605332735-9648-1-git-send-email-kaixuxia@tencent.com
ezusb_read_ltv() is always invoked via the ->read_ltv() callback. This
callback is mostly invoked under orinoco_lock() which disables BH.
There are a few invocations during probe which occur in preemptible
context via:
ezusb_probe() -> orinoco_init() -> determine_fw_capabilities()
Extend `hermes_ops' with the ->read_ltv_pr callback which is implemented
with the same callback like ->read_ltv on `hermes_ops_local'.
On `ezusb_ops' ->read_ltv is used for callbacks under the lock which
need to poll.
The new ->read_ltv_pr() is used in the preemptible context in which it
is possible to wait for the completion. Provide HERMES_READ_RECORD_PR()
and hermes_read_wordrec_pr() which behave like their non _pr equivalents
and invoke ->read_ltv_pr().
This removes the last user of ezusb_req_ctx_wait() and can now be
removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-11-bigeasy@linutronix.de
All invocations of ezusb_docmd_wait() happen via ->cmd_wait(). This
callback is always invoked under the orinoco_lock() which disables BH.
Use ezusb_req_ctx_wait_poll() for ezusb_docmd_wait() because it must not
sleep.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-10-bigeasy@linutronix.de
ezusb_doicmd_wait() is invoked via ->init_cmd_wait() callback.
This callback is only invoked hermesi_program_init() and
hermesi_program_end() which are the ->program_init() and ->program_end()
callbacks as assigned by `hermes_ops_local'. They are never used by the
USB interface since the USB interface provides its own set of callbacks
by `ezusb_ops'.
Replace ezusb_doicmd_wait() with a warning in case I missed the obvious.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-9-bigeasy@linutronix.de
All invocation of ezusb_write_ltv() happen via ->write_ltv() and are
performed under the orinoco_lock() which disables BH.
Use ezusb_req_ctx_wait_poll() for ezusb_write_ltv() because it must not
sleep.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-8-bigeasy@linutronix.de
ezusb_read_pda() is invoked via ->read_pda() while firmware is loaded in
preemtible context.
Use ezusb_req_ctx_wait_compl() in ezusb_read_pda().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-7-bigeasy@linutronix.de
The ezusb_program() is invoked via ->program() in preemptible
context during firmware loading. This is also true for the
->program_init() and ->program_end() callback.
Use ezusb_req_ctx_wait_compl() in ezusb_program_init(),
ezusb_program_bytes(), ezusb_program_end() which are part of firmware
loading during device probe.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-6-bigeasy@linutronix.de
ezusb_init() is always invoked in preemptible context during device
probe. Only orinoco_up() -> orinoco_reinit_firmware() may invoke the
function from atomic context but this is never used for the USB
interface.
Use ezusb_req_ctx_wait_compl() for the ezusb_write_ltv() and
ezusb_docmd_wait() invocations from within ezusb_init().
Preserve the generic versions which have still other user via the
callback.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-5-bigeasy@linutronix.de
ezusb_xmit() sets ->in_rid in its request which means it does not wait
for an answer.
Use the ezusb_req_ctx_wait_skip() to denote that an answer is not
expected.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-4-bigeasy@linutronix.de
ezusb_access_ltv() sends the prepared request to the USB device.
Requests which have ->in_rid set expect an answer from the USB device
and the function has to wait until the URB with the answer arrives.
The function uses in_interrupt() to determine if it can simply sleep on
the completion and be woken up once the answer arrives or if it needs to
poll on the completion.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
Aside of that in_interrupt() is not correct as it does not catch preempt
disabled regions in which sleeping is also not allowed.
Provide stubs which can be used as a replacement. The current default is
the current behaviour which sleeps/polls depending on in_interrupt().
The goal is to audit all callers and use either the poll or sleep
version.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-3-bigeasy@linutronix.de
ezusb_xmit() allocates a context which is leaked if
orinoco_process_xmit_skb() returns an error.
Move ezusb_alloc_ctx() after the invocation of
orinoco_process_xmit_skb() because the context is not needed so early.
ezusb_access_ltv() will cleanup the context in case of an error.
Fixes: bac6fafd4d6a0 ("orinoco: refactor xmit path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-2-bigeasy@linutronix.de
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3b1e0a7bdfee ("brcmfmac: add support for SAE authentication offload")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605248896-16812-1-git-send-email-zhangchangzhong@huawei.com
