IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Factor the code to go from a gpiochip label + pin-numer to a gpio_desc
out of x86_acpi_irq_helper_get() and make it into a new
x86_android_tablet_get_gpiod() helper, as this will be necessary in some
x86_dev_info.init() functions too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-3-hdegoede@redhat.com
Add properties describing the battery on the Asus ME176C / TF103C
tablets. The max constant charge volt / current settings were taken
from the factory Android image on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-2-hdegoede@redhat.com
power_supply_get_battery_info() which is used by charger and fuel-gauge
drivers on x86-android-tablets, expects the battery properties to be
described in a stand-alone battery fwnode which is then referenced
from both the charger and fuel-gauge device's fwnodes.
Add support for registering + unregistering a swnode for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-1-hdegoede@redhat.com
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2631712.mvXUDI8C0e@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This switches the P10T tablet to "Android" mode, where the Home button
sends a single sancode instead of a Windows-specific key combination and
the other button doesn't disable the Wi-Fi.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20220110063512.273252-1-lkundrak@v3.sk
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The individual gpiod_lookup_table structs cannot be const because they
contain a list-head which gets used when registering them.
But the array of pointers to the gpiod_lookup_table-s used by a board
can be const, constify these.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-3-hdegoede@redhat.com
Add an init() callback to struct x86_dev_info, board descriptions can use
this to do some custom setup before registering the i2c_clients, platform-
devices and servdevs.
Also add an exit() callback to also allow for cleanup of the custom setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-2-hdegoede@redhat.com
Some of the broken DSDTs on these devices often also include broken / wrong
_AEI (ACPI Event Interrupt) handlers, which can cause e.g. interrupt storms
by listening to a floating GPIO pin.
Add support for disabling these and disable them on the Asus ME176C and
TF103C tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-1-hdegoede@redhat.com
Fix leaking the registered gpiod_lookup tables when the kcalloc() for the
i2c_clients array fails.
Fixes: ef2ac11493e2 ("platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220108154947.136593-1-hdegoede@redhat.com
The whitelabel (sold as various brands) TM800A550L tablets's DSDT contains
a whole bunch of bogus ACPI I2C devices and the ACPI node describing
the touchscreen is bad (the IRQ is missing). Enumeration of these is
skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the (now) missing I2C devices by
adding the necessary device info to the x86-android-tablets module,
including instantiating an actually working i2c-client for
the touchscreen.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-13-hdegoede@redhat.com
Asus MeMO Pad 7 ME176C tablets have an Android factory img with everything
hardcoded in the kernel instead of properly described in the DSDT.
Add support for manually instantiating all the missing I2C devices by
adding the necessary device info to the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-12-hdegoede@redhat.com
Asus TF103C tablets have an Android factory img with everything hardcoded
in the kernel instead of properly described in the DSDT.
Add support for manually instantiating all the missing I2C devices by
adding the necessary device info to the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-11-hdegoede@redhat.com
Since the x86-android-tablets code does all it work from module_init() it
cannot use -EPROBE_DEFER to wait for e.g. interrupt providing GPIO-chips
or PMIC-cells to show up.
To make sure things will still work when some necessary resource providers
are build as module allow the per board info to specify a list of modules
to pre-load before instantiating the I2C clients.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-10-hdegoede@redhat.com
Add support for instantiating platform-devs, note this also makes some
small changes to the i2c_client instantiating code to make the 2 flows
identical.
Specifically for the pdevs flow pdev_count must only be set after
allocating the pdevs array, to avoid a NULL ptr deref in
x86_android_tablet_cleanup() and the i2c_clients flow is updated
to work the same way.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-7-hdegoede@redhat.com
The Crystal Cove PMIC has a pin which can be used to connect the IRQ of
an external charger IC. On some boards this is used so we need a way to
look this up.
Note that the Intel PMICs have 2 levels of interrupts and thus
2 levels of IRQ domains all tied to a single fwnode.
Level 1 is the irqchip which demultiplexes the actual PMIC interrupt into
interrupts for the various MFD cells. Level 2 are the irqchips used in the
cell drivers which themselves export IRQs, such as the crystal_cove_gpio
driver, which de-multiplexes the level 2 interrupts for the GPIOs into
individual per GPIO IRQs.
The crystal_cove_charger driver registers an irqchip with a single IRQ for
the charger driver to consume. Note the MFD cell IRQ cannot be consumed
directly because the level 2 interrupts must be explicitly acked.
To allow finding the right IRQ domain when looking up the IRQ for
the charger, the crystal_cove_charger driver sets a DOMAIN_BUS_WIRED token
on its IRQ domain.
Add support for looking up the IRQ from the crystal_cove_charger driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-6-hdegoede@redhat.com
The x86-android-tablets code all runs from module_init, so returning
-EPROBE_DEFER is not appropriate. Instead log an error and bail.
This path should never get hit since PINCTRL_BAYTRAIL is a bool.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-5-hdegoede@redhat.com
x86 tablets which ship with Android as (part of) the factory image
typically have various problems with their DSDTs. The factory kernels
shipped on these devices typically have device addresses and GPIOs
hardcoded in the kernel, rather then specified in their DSDT.
With the DSDT containing a random collection of devices which may or
may not actually be present as well as missing devices which are
actually present.
This driver, which loads only on affected models based on DMI matching,
adds DMI based instantiating of kernel devices for devices which are
missing from the DSDT, fixing e.g. battery monitoring, touchpads and/or
accelerometers not working.
Note the Kconfig help text also refers to "various fixes" ATM there are
no such fixes, but there are also known cases where entries are present
in the DSDT but they contain bugs, such as missing/wrong GPIOs. The plan
is to also add fixes for things like this here in the future.
This is the least ugly option to get these devices to fully work and to
do so without adding any extra code to the main kernel image (vmlinuz)
when built as a module.
Link: https://lore.kernel.org/platform-driver-x86/20211031162428.22368-1-hdegoede@redhat.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211223190750.397487-1-hdegoede@redhat.com
