IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The 18i8 Gen 2 has 8 PCM Inputs, not 20. Fix the ports entry in
s18i8_gen2_info.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164625.GA9165@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 18i8 Gen 2 S/PDIF outputs are available at 192kHz, unlike
the 18i20 Gen 2. Remove the comment that says otherwise.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164622.GA9155@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Asus Zenbook 14 UM431D has two speaker pins and a headphone pin, and
the auto-parser ends up assigning the bass to the third DAC 0x06.
Although the tone comes out, it's inconvenient because this DAC has no
volume control unlike two other DACs.
For obtaining the volume control for the bass speaker, this patch
enforces the mapping to let both front and bass speaker pins sharing
the same DAC. It's not ideal but a little bit of improvement.
Since we've already applied the same workaround for another ASUS
machine, we just need to hook the chain to the existing quirk.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212547
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210620065952.18948-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On HP Spectre x360 15-df0xxx, after system boot with plugged headset, the
headset mic are not detected.
Moving pincfg and DAC's config to single fixup function fix this.
[ The actual bug in the original code was that it used a chain to
ALC286_FIXUP_SPEAKER2_TO_DAC1, and it contains not only the DAC1
route fix but also another chain to ALC269_FIXUP_THINKPAD_ACPI.
I thought the latter one is harmless for non-Thinkpad, but it
doesn't seem so; it contains again yet another chain to
ALC269_FIXUP_SKI_IGNORE, and this might be bad for some machines,
including this HP machine. -- tiwai ]
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210619204105.5682-1-eliadevito@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A user of FFADO project reported the issue of ToneWeal FW66. As a result,
the device is identified as one of applications of BeBoB solution.
I note that in the report the device returns contradictory result in plug
discovery process for audio subunit. Fortunately ALSA BeBoB driver doesn't
perform it thus it's likely to handle the device without issues.
I receive no reaction to test request for this patch yet, however it would
be worth to add support for it.
daniel@gibbonmoon:/sys/bus/firewire/devices/fw1$ grep -r . *
Binary file config_rom matches
dev:244:1
guid:0x0023270002000000
hardware_version:0x000002
is_local:0
model:0x020002
model_name:FW66
power/runtime_active_time:0
power/runtime_active_kids:0
power/runtime_usage:0
power/runtime_status:unsupported
power/async:disabled
power/runtime_suspended_time:0
power/runtime_enabled:disabled
power/control:auto
subsystem/drivers_autoprobe:1
uevent:MAJOR=244
uevent:MINOR=1
uevent:DEVNAME=fw1
units:0x00a02d:0x010001
vendor:0x002327
vendor_name:ToneWeal
fw1.0/uevent:MODALIAS=ieee1394:ven00002327mo00020002sp0000A02Dver00010001
fw1.0/power/runtime_active_time:0
fw1.0/power/runtime_active_kids:0
fw1.0/power/runtime_usage:0
fw1.0/power/runtime_status:unsupported
fw1.0/power/async:disabled
fw1.0/power/runtime_suspended_time:0
fw1.0/power/runtime_enabled:disabled
fw1.0/power/control:auto
fw1.0/model:0x020002
fw1.0/rom_index:15
fw1.0/specifier_id:0x00a02d
fw1.0/model_name:FW66
fw1.0/version:0x010001
fw1.0/modalias:ieee1394:ven00002327mo00020002sp0000A02Dver00010001
Cc: Daniel Jozsef <daniel.jozsef@gmail.com>
Reference: https://lore.kernel.org/alsa-devel/20200119164335.GA11974@workstation/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210619083922.16060-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210602113643.3037374-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I assumed that the combination of packet formats for MOTU 828 mk3 Hybrid
is the same as MOTU 828 mk3 FireWire. However at higher sampling rate, it
is different. MOTU 828 mk3 Hybrid has additional 4 dummy data chunks for
rx packet.
This commit fixes the issue to which I address at a commit f2ac3b839540
("ALSA: firewire-motu: sequence replay for source packet header").
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210618040713.114611-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Below devices reports zero as the number of channels for external output
plug with MIDI type:
* Yamaha GO44/GO46
* Terratec Phase 24/X24
As a result, rx packet format is invalid and they generate silent sound.
This is a regression added in v5.13.
This commit fixes the bug, addressed at a commit 1bd1b3be8655 ("ALSA:
bebob: perform sequence replay for media clock recovery").
Cc: <stable@vger.kernel.org>
Fixes: 5c6ea94f2b7c ("ALSA: bebob: detect the number of available MIDI ports")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210618040447.113306-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP EliteBook x360 830 G8 using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210617171422.16652-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210617102746.1709-1-thunder.leizhen@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210617103538.1818-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The system port creation in ALSA OSS sequencer was wrongly checked
against to the port number that can be never negative. The error code
should be checked rather against the ioctl call.
This patch corrects the error check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210617134742.6321-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for the model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 bytes for control and status messages in the end of
each data block.
* The most of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b14).
* It's selectable to use signal on optical interface, however the device
has no register specific to it. The state has effect just to whether
to exclude differed data chunks.
* The internal multiplexer is not configured by software.
Just after powering on, the device has a quirk to fail handling
transaction. I recommend users to connect the device enough after powering
on.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04102814 bus_info_length 4, crc_length 16, crc 10260
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003ab34 directory_length 3, crc 43828
42c 120001f2 specifier id
430 13000002 version
434 17102801 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002057d leaf_length 2, crc 1405
43c 0001f200 company_id 0001f2 |
440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This symbol is not used outside of hdmi-codec.c, so marks it static.
Fix the following sparse warning:
sound/soc/codecs/hdmi-codec.c:750:25: warning: symbol
'hdmi_codec_controls' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623822941-3077-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return statements in functions returning bool should use true/false
instead of 1/0.
Fix the following coccicheck warning:
./sound/soc/codecs/wcd938x.c:1190:9-10: WARNING: return of 0/1 in
function 'wcd938x_volatile_register' with return type bool.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623811535-15841-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the following includecheck warnings:
./sound/soc/codecs/wcd938x.c: sound/soc.h is included more than once.
./sound/soc/codecs/wcd938x-sdw.c: sound/soc.h is included more than
once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623822667-130511-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The definition of CS42L42_ADC_PDN_MASK was incorrectly defined
as the HP_PDN bit.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210616135604.19363-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirking bit-flags are currently set as contiguous integer enum values
and so currently SND_BEBOB_QUIRK_INITIAL_DISCONTINUOUS_DBC is zero and so
he quirking never getting set or tested correctly for this quirk. Fix this
by setting the quirking constants as shifted bit values.
Addresses-Coverity: ("Bitwise-and with zero")
Fixes: 93cd12d6e88a ("ALSA: bebob: code refactoring for model-dependent quirks")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210615142048.59900-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails,
snd_pmac_probe() need return error code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210616021121.1991502-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Various devices(such as the Motorola Moto G7 Power, codename ocean) use
the Quinary MI2S ports for reproducing audio. Add support to them in
kernel.
Signed-off-by: Gabriel David <ultracoolguy@disroot.org>
Gabriel David (4):
ASoC: q6afe: dt-bindings: Add QUIN_MI2S_RX/TX
ASoC: qdsp6: q6afe: Add Quinary MI2S ports
ASoC: qdsp6: q6afe-dai: Add Quinary MI2S ports
ASoC: qdsp6: q6routing: Add Quinary MI2S ports
include/dt-bindings/sound/qcom,q6afe.h | 2 ++
sound/soc/qcom/qdsp6/q6afe-dai.c | 41 ++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6afe.c | 8 +++++
sound/soc/qcom/qdsp6/q6afe.h | 2 +-
sound/soc/qcom/qdsp6/q6routing.c | 11 +++++++
5 files changed, 63 insertions(+), 1 deletion(-)
---
As a warning, I'm currently the only tester of these patches. If that's
gonna be a problem then I understand.
--
2.31.1
For some reason we ended up with cyclic dependency between snd_soc_wcd938x
and snd_soc_wcd938x_sdw modules.
Remove this cyclic dependency by handling them in respective modules.
Without this below error is reported during make modules_install
depmod: ERROR: Cycle detected: snd_soc_wcd938x -> snd_soc_wcd938x_sdw -> snd_soc_wcd938x
depmod: ERROR: Found 2 modules in dependency cycles!
Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210615132829.23067-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds MI2S mixers to Quinary ports
Signed-off-by: Gabriel David <ultracoolguy@disroot.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210605022206.13226-5-ultracoolguy@disroot.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to Quinary MI2S ports supported in AFE.
Signed-off-by: Gabriel David <ultracoolguy@disroot.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210605022206.13226-4-ultracoolguy@disroot.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the Quinary MI2S ports on LPASS.
Signed-off-by: Gabriel David <ultracoolguy@disroot.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210605022206.13226-3-ultracoolguy@disroot.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20210615113324.238837-1-pulehui@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
