IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems
beyond matched only a single DMI model (20KGS3JF01), that didn't cover
my laptop (20KH002JUS). Change to match based on DMI product family to
cover all X1 6th gen systems.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On this system EC interrupt triggers constantly kicking devices out of
low power states and thus blocking power management. The system also has
a PCIe root port hosting Alpine Ridge Thunderbolt controller and it
never gets a chance to go to D3cold because of this.
Since the power button works the same regardless if EC interrupt is
enabled or not during s2idle, add a quirk for this machine that sets
ec_no_wakeup=true preventing spurious wakeups.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On platforms where the Low Power S0 Idle _DSM interface is used,
on wakeup from suspend-to-idle, when it is known that the ACPI SCI
has triggered while suspended, dispatch the EC GPE in order to catch
all EC events that may have triggered the wakeup before carrying out
the noirq phase of device resume.
That is needed to handle power button wakeup on some platforms where
the EC goes into a low-power mode during suspend-to-idle and while in
that mode it will discard events after a timeout. If that timeout is
shorter than the time it takes to complete the noirq resume of
devices, looking for EC events after the latter is too late.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Commit 662591461c (ACPI / EC: Drop EC noirq hooks to fix a
regression) modified the ACPI EC driver so that it doesn't switch
over to busy polling mode during noirq stages of system suspend and
resume in an attempt to fix an issue resulting from that behavior.
However, that modification introduced a system resume regression on
Thinkpad X240, so make the EC driver switch over to the polling mode
during noirq stages of system suspend and resume again, which
effectively reverts the problematic commit.
Fixes: 662591461c (ACPI / EC: Drop EC noirq hooks to fix a regression)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197863
Reported-by: Markus Demleitner <m@tfiu.de>
Tested-by: Markus Demleitner <m@tfiu.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose
the wrong half on big-endian 64-bit systems. Fix this by changing its
type to "u32" and removing the cast, as all other code already uses u32
or sometimes even only u8.
Fixes: 1195a09816 (ACPI: Provide /sys/kernel/debug/ec/...)
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT
EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an
ACPI device. Thus the following commit actually removed post-resume
acpi_ec_enable_event() invocation for such platforms, and triggered a
regression on them that after being resumed, EC (actually should be ECDT)
driver stops handling EC events:
Commit: c2b46d679b
Subject: ACPI / EC: Add PM operations to improve event handling for resume process
Notice that the root cause actually is "ECDT is not an ACPI device" rather
than "the timing of acpi_ec_enable_event() invocation", this patch fixes
this issue by enumerating ECDT EC as an ACPI device. Due to the existence
of the noirq stage, the ability of tuning the timing of
acpi_ec_enable_event() invocation is still meaningful.
This patch is a little bit different from the posted fix by moving
acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make
sure that EC event handling won't be stopped as long as the ACPI EC driver
is bound. Thus the following sequence shouldn't disable EC event handling:
unbind,suspend,resume,bind.
Fixes: c2b46d679b (ACPI / EC: Add PM operations to improve event handling for resume process)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847
Reported-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Originally the Samsung quirks removed by commit 4c237371 can be covered
by commit e923e8e7 and ec_freeze_events=Y mode. But commit 9c40f956
changed ec_freeze_events=Y back to N, making this problem re-surface.
Actually, if commit e923e8e7 is robust enough, we can freely change
ec_freeze_events mode, so this patch fixes the issue by improving
commit e923e8e7.
Related commits listed in the merged order:
Commit: e923e8e79e
Subject: ACPI / EC: Fix an issue that SCI_EVT cannot be detected
after event is enabled
Commit: 4c237371f2
Subject: ACPI / EC: Remove old CLEAR_ON_RESUME quirk
Commit: 9c40f956ce
Subject: Revert "ACPI / EC: Enable event freeze mode..." to fix
a regression
This patch not only fixes the reported post-resume EC event triggering
source issue, but also fixes an unreported similar issue related to the
driver bind by adding EC event triggering source in ec_install_handlers().
Fixes: e923e8e79e (ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled)
Fixes: 4c237371f2 (ACPI / EC: Remove old CLEAR_ON_RESUME quirk)
Fixes: 9c40f956ce (Revert "ACPI / EC: Enable event freeze mode..." to fix a regression)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196833
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-by: Alistair Hamilton <ahpatent@gmail.com>
Tested-by: Alistair Hamilton <ahpatent@gmail.com>
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
EC_FLAGS_COMMAND_STORM is actually used to mask GPE during IRQ processing.
This patch cleans it up using more readable flag/function names.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the observation that the EC command/data register addresses are
sufficient to determine if two EC devices are equivelent to modify
acpi_is_boot_ec().
Then, for the removed comparison factors, EC ID and EC GPE, they need
to be synchronized for the boot_ec:
1. Before registering the BIOS-provided EC event handlers in
acpi_ec_register_query_methods(), the namespace node holding
_Qxx methods should be located. The real namespace PNP0C09
device location then is apparently more trustworthy than the
ECDT EC ID.
2. Because of the ASUS quirks, the ECDT EC GPE is more trustworthy
than the namespace PNP0C09 device's _GPE setting.
Use the above observations to synchronize the boot_ec settings in
acpi_ec_add().
Finally, change the order of acpi_ec_ecdt_start() and acpi_ec_add(),
called from acpi_bus_register_driver(), so as to follow the fast path
of determining the location of _Qxx.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw : Changelog & comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2a5708409e (ACPI / EC: Fix a gap that ECDT EC cannot handle
EC events) introduced acpi_ec_ecdt_start(), but that function is
invoked before acpi_ec_query_init(), which is too early. This causes
the kernel to crash if an EC event occurs after boot, when ec_query_wq
is not valid:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000102
...
Workqueue: events acpi_ec_event_handler
task: ffff9f539790dac0 task.stack: ffffb437c0e10000
RIP: 0010:__queue_work+0x32/0x430
Normally, the DSDT EC should always be valid, so acpi_ec_ecdt_start()
is actually a no-op in the majority of cases. However, commit
c712bb58d8 (ACPI / EC: Add support to skip boot stage DSDT probe)
caused the probing of the DSDT EC as the "boot EC" to be skipped when
the ECDT EC is valid and uncovered the bug.
Fix this issue by invoking acpi_ec_ecdt_start() after acpi_ec_query_init()
in acpi_ec_init().
Link: https://jira01.devtools.intel.com/browse/LCK-4348
Fixes: 2a5708409e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events)
Fixes: c712bb58d8 (ACPI / EC: Add support to skip boot stage DSDT probe)
Reported-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle) introduced acpi_freeze_sync() whose purpose is to
flush all of the processing of possible wakeup events signaled via
the ACPI SCI. However, it doesn't flush the query workqueue used
by the EC driver, so the events generated by the EC may not be
processed timely which leads to issues (increased overhead at least,
lost events possibly).
To fix that introduce acpi_ec_flush_work() that will flush all of
the outstanding EC work and call it from acpi_freeze_sync().
Fixes: eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 8110dd281e (ACPI / sleep: EC-based wakeup from
suspend-to-idle on recent systems) the configuration of GPEs,
including the EC one, is not changed during suspend-to-idle on
recent systems. That's in order to make system wakeup events
generated by the EC work, in particular.
However, on some of the systems in question (for example on Dell
XPS13 9365), in addition to generating system wakeup events the
EC generates a heartbeat sequence of interrupts that have nothing
to do with wakeup while suspended, and the Low Power Idle S0 _DSM
interface doesn't change that behavior.
The users of those systems may prefer to disable the EC GPE during
system suspend, for the cost of non-functional power button wakeup
or similar, but currently there is no way to do that.
For this reason, add a new module parameter, ec_no_wakeup, for the
EC driver module that, if set, will cause the EC GPE to be disabled
during system suspend and re-enabled during the subsequent system
resume.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=192591#c106
Amends: 8110dd281e (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems)
Reported-and-tested-by: Patrik Kullman <patrik.kullman@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On Lenovo ThinkPad X1 Carbon - the 5th Generation, enabling an earlier
EC event freezing timing causes acpitz-virtual-0 to report a stuck
48C temparature. And with EC firmware revisioned as 1.14, without
reverting back to old EC event freezing timing, the fan still blows
up after a system resume.
This reverts the culprit change so that the regression can be fixed
without upgrading the EC firmware.
Fixes: d30283057e (ACPI / EC: Enable event freeze mode to improve event handling)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191181#c168
Tested-by: Damjan Georgievski <gdamjan@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to bug reports, although the busy polling mode can make
noirq stages execute faster, it causes abnormal fan blowing up after
system resume (see the first link below for a video demonstration)
on Lenovo ThinkPad X1 Carbon - the 5th Generation. The problem can
be fixed by upgrading the EC firmware on that machine.
However, many reporters confirm that the problem can be fixed by
stopping busy polling during suspend/resume and for some of them
upgrading the EC firmware is not an option.
For this reason, drop the noirq stage hooks from the EC driver
to fix the regression.
Fixes: c3a696b6e8 (ACPI / EC: Use busy polling mode when GPE is not enabled)
Link: https://youtu.be/9NQ9x-Jm99Q
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196129
Reported-by: Andreas Lindhe <andreas@lindhe.io>
Tested-by: Gjorgji Jankovski <j.gjorgji@gmail.com>
Tested-by: Damjan Georgievski <gdamjan@gmail.com>
Tested-by: Fernando Chaves <nanochaves@gmail.com>
Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com>
Tested-by: Denis P. <theoriginal.skullburner@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA code in the kernel to upstream revision
revision 20170531 (which covers all of the new material from
ACPI 6.2) including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value
for HEST, header support for TPM2 table changes, and BGRT
Status field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZWrJyAAoJEILEb/54YlRxY2cP/1h2un46sEnP7uLVLK4lpEih
NQ79+fA7NTidA9J6gin2Kjgl8BFgswAhQBJZG3cJxUrhIIRWItSeLGvHb0CXX+iY
m7CpL0ralIKV9XCju8B5b2V+0qn2tPzHS5a8PSX9Gvs0N6G8Qnlq4jspIjXMa3zH
3D/fmYbQZeuHjypiBqRlB5IE49O2FQL2+d4Vn1rryuAFFya610ulASOZxsQ015d4
Xt2pSTqUbqeD8rG8+j4VKFy8x0Lj0eEU3FUgYNJHlO+pOG+wTTs3KPyNOa33h0OC
US0Wc0XOUyz78P5YkEgA7Ve/j1E6bqQ9bVF6mIcqjvAOReqSe84RCJ86Ckjlewxf
VMNjCT/qDDkB8d+IAX6e7uYwxuP8bTSfUGBHjoI16qaJ13zd1/jOVY8QH5zPg5Ml
r06HO5iOrQS3yhumYRk3gIdV+cgdHt3SEQlfi30nFH5Yzp8epk85UPyjYUYPDwqy
QP5QbYvmHyuIUSXW2HQxZYADSaqnKIglRizCIKcFHT5+J554DjM5T51A5UpyQkY3
cjtgrpg4KA5qCrpUAqPPxA2mtUVsZk1h4HwhrkTVt4xaR9GP9gvvzonP552fmHrM
nIX9tM2JEf+LC7eCV+yrk8dtGNTRYpmEBQw7go4R82pTE5YTOWDf1bNM59gTFoWP
LXi28C9lb2aibWlX/0bw
=ImFw
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These mostly update the ACPICA code in the kernel to upstream revision
20170531 which covers all of the new material from ACPI 6.2, including
new tables (WSMT, HMAT, PPTT), new subtables and definition changes
for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
descriptor macros for pin control, support for new predefined methods
(_LSI, _LSR, _LSW, _HMA), fixes and cleanups.
On top of that, an additional ACPICA change from Kees (which also is
upstream already) switches all of the definitions of function pointer
structures in ACPICA to use designated initializers so as to make the
structure layout randomization GCC plugin work with it.
The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
driver update, a new backlight blacklist entry, and update of the
tables configfs interface and a messages formatting cleanup.
Specifics:
- Update the ACPICA code in the kernel to upstream revision revision
20170531 (which covers all of the new material from ACPI 6.2)
including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value for
HEST, header support for TPM2 table changes, and BGRT Status
field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll)"
* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
ACPI / EC: Add quirk for GL720VMK
ACPI / EC: Fix media keys not working problem on some Asus laptops
ACPI / EC: Add support to skip boot stage DSDT probe
ACPI / EC: Enhance boot EC sanity check
ACPI / video: Add quirks for the Dell Precision 7510
ACPI: EC: Fix EC command visibility for dynamic debug
ACPI: EC: Fix an EC event IRQ storming issue
ACPICA: Use designated initializers
ACPICA: Update version to 20170531
ACPICA: Update a couple of debug output messages
ACPICA: acpiexec: enhance local signal handler
ACPICA: Simplify output for the ACPI Debug Object
ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
ACPICA: Improvements for debug output only
ACPICA: Disassembler: allow conflicting external declarations to be emitted.
ACPICA: Disassembler: add external op to namespace on first pass
ACPICA: Disassembler: prevent external op's from opening a new scope
ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
ACPICA: Changing External to a named object
ACPICA: Update two error messages to emit control method name
...
ASUS GL720VMK is also affected by the EC GPE preference issue.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some Asus laptops (verified on X550VXK/FX502VD/FX502VE) get no
interrupts when pressing media keys thus the corresponding functions
are not invoked. It's due to the _GPE defines in DSDT for EC returns
differnt value compared to the GPE Number in ECDT. Confirmed with Asus
that the vale in ECDT is the correct one. This commit uses DMI quirks
to prevent calling _GPE when doing ec_parse_device() and keep the ECDT
GPE number setting for the EC device.
With previous commit, it is ensured that if there is an ECDT, it can
always be kept as boot_ec, this patch thus can implement a quirk on
top of the determined ECDT boot_ec.
Link: https://phabricator.endlessm.com/T16033
Link: https://phabricator.endlessm.com/T16722
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195651
Tested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We prepared _INI/_STA methods for \_SB, \_SB.PCI0, \_SB.LID0 and
\_SB.EC, _HID(PNP0C09)/_CRS/_GPE for \_SB.EC to poke Windows behavior
with qemu, we got the following execution sequence:
\_SB._INI
\_SB.PCI0._STA
\_SB.LID0._STA
\_SB.EC._STA
\_SB.PCI0._INI
\_SB.LID0._INI
\_SB.EC._INI
There is no extra DSDT EC device enumeration process occurring before
the main ACPI device enumeration process. That means acpi_ec_dsdt_probe()
is not Windows-compatible.
Tracking back, it was added by the following commit:
Commit: c5279dee26
Subject: ACPI: EC: Add some basic check for ECDT data
but that commit was misguided.
Why we shouldn't enumerate DSDT EC before the main ACPI device
enumeration?
The only way to know if the DSDT EC is valid would be to evaluate its
_STA control method, but it's not safe to evaluate this control method
that early and out of the ACPI enumeration process, because _STA may
refer to entities (such as resources or ACPI device objects) that may
not have been initialized before OSPM starts to enumerate them via
the main ACPI device enumeration.
But after we had reverted back to the expected behavior, a regression
was reported. On that platform, there is no ECDT, but the platform
control methods access EC operation region earlier than Linux expects
causing some ACPI method execution errors. For this reason, we just
go back to old behavior to still probe DSDT EC as the boot EC.
However, that turns out to lead to yet another functional breakage
and in order to work around all of the problems, we skip boot stage
DSDT probe when the ECDT exists so that a later quirk can always use
correct ECDT GPE setting.
Link: http://bugzilla.kernel.org/show_bug.cgi?id=11880
Link: http://bugzilla.kernel.org/show_bug.cgi?id=119261
Link: http://bugzilla.kernel.org/show_bug.cgi?id=195651
Tested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog & comments massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's reported that some buggy BIOS tables can contain 2 DSDT ECs, one of
them is invalid but acpi_ec_dsdt_probe() fails to pick the valid one.
This patch simply enhances sanity checks in ec_parse_device() as a
workaround to skip probing wrong namespace ECs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195651
Tested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_ec_cmd_string() currently is only enabled for "DEBUG" macro, but users
trend to use CONFIG_DYNAMIC_DEBUG and enable ec.c pr_debug() print-outs by
"dyndbg='file ec.c +p'". In this use case, all command names are turned
into UNDEF and the log is confusing. This affects bugzilla triage work.
This patch fixes this issue by enabling acpi_ec_cmd_string() for
CONFIG_DYNAMIC_DEBUG.
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The EC event IRQ (SCI_EVT) can only be handled by submitting QR_EC. As the
EC driver handles SCI_EVT in a workqueue, after SCI_EVT is flagged and
before QR_EC is submitted, there is a period risking IRQ storming. EC IRQ
must be masked for this period but linux EC driver never does so.
No end user notices the IRQ storming and no developer fixes this known
issue because:
1. The EC IRQ is always edge triggered GPE, and
2. The kernel can execute no-op EC IRQ handler very fast.
For edge-triggered EC GPE platforms, it is only reported of post-resume EC
event lost issues, there won't be an IRQ storming. For level triggered EC
GPE platforms, fortunately the kernel is always fast enough to execute such
a no-op EC IRQ handler so that the IRQ handler won't be accumulated to
starve the task contexts, causing a real IRQ storming.
But the IRQ storming actually can still happen when:
1. The EC IRQ performs like level triggered GPE, and
2. The kernel EC debugging log is turned on but the console is slow enough.
There are more and more platforms using EC GPE as wake GPE where the EC GPE
is likely designed as level triggered. Then when EC debugging log is
enabled, the EC IRQ handler is no longer a no-op but dumps IRQ status to
the consoles. If the consoles are slow enough, the EC IRQs can arrive much
faster than executing the handler. Finally the accumulated EC event IRQ
handlers starve the task contexts, causing the IRQ storming to occur, and
the kernel hangs can be observed during boot/resume.
This patch fixes this issue by masking EC IRQ for this period:
1. Begins when there is an SCI_EVT IRQ pending, and
2. Ends when there is a QR_EC completed (SCI_EVT acknowledged).
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some recent Dell laptops, including the XPS13 model numbers 9360 and
9365, cannot be woken up from suspend-to-idle by pressing the power
button which is unexpected and makes that feature less usable on
those systems. Moreover, on the 9365 ACPI S3 (suspend-to-RAM) is
not expected to be used at all (the OS these systems ship with never
exercises the ACPI S3 path in the firmware) and suspend-to-idle is
the only viable system suspend mechanism there.
The reason why the power button wakeup from suspend-to-idle doesn't
work on those systems is because their power button events are
signaled by the EC (Embedded Controller), whose GPE (General Purpose
Event) line is disabled during suspend-to-idle transitions in Linux.
That is done on purpose, because in general the EC tends to be noisy
for various reasons (battery and thermal updates and similar, for
example) and all events signaled by it would kick the CPUs out of
deep idle states while in suspend-to-idle, which effectively might
defeat its purpose.
Of course, on the Dell systems in question the EC GPE must be enabled
during suspend-to-idle transitions for the button press events to
be signaled while suspended at all, but fortunately there is a way
out of this puzzle.
First of all, those systems have the ACPI_FADT_LOW_POWER_S0 flag set
in their ACPI tables, which means that the OS is expected to prefer
the "low power S0 idle" system state over ACPI S3 on them. That
causes the most recent versions of other OSes to simply ignore ACPI
S3 on those systems, so it is reasonable to expect that it should not
be necessary to block GPEs during suspend-to-idle on them.
Second, in addition to that, the systems in question provide a special
firmware interface that can be used to indicate to the platform that
the OS is transitioning into a system-wide low-power state in which
certain types of activity are not desirable or that it is leaving
such a state and that (in principle) should allow the platform to
adjust its operation mode accordingly.
That interface is a special _DSM object under a System Power
Management Controller device (PNP0D80). The expected way to use it
is to invoke function 0 from it on system initialization, functions
3 and 5 during suspend transitions and functions 4 and 6 during
resume transitions (to reverse the actions carried out by the
former). In particular, function 5 from the "Low-Power S0" device
_DSM is expected to cause the platform to put itself into a low-power
operation mode which should include making the EC less verbose (so to
speak). Next, on resume, function 6 switches the platform back to
the "working-state" operation mode.
In accordance with the above, modify the ACPI suspend-to-idle code
to look for the "Low-Power S0" _DSM interface on platforms with the
ACPI_FADT_LOW_POWER_S0 flag set in the ACPI tables. If it's there,
use it during suspend-to-idle transitions as prescribed and avoid
changing the GPE configuration in that case. [That should reflect
what the most recent versions of other OSes do.]
Also modify the ACPI EC driver to make it handle events during
suspend-to-idle in the usual way if the "Low-Power S0" _DSM interface
is going to be used to make the power button events work while
suspended on the Dell machines mentioned above
Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When GPE is not enabled, it is not efficient to use the wait polling mode
as it introduces an unexpected scheduler delay.
So before the GPE handler is installed, this patch uses busy polling mode
for all EC(s) and the logic can be applied to non boot EC(s) during the
suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191561
Tested-by: Jakobus Schurz <jakobus.schurz@gmail.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
IRQ polling logic has been implemented to drain the post-boot/resume
EC events:
1. Triggered by the following code, invoked from acpi_ec_enable_event():
if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
advance_transaction(ec);
2. Drained by the following code, invoked after acpi_ec_complete_query():
if (status & ACPI_EC_FLAG_SCI)
acpi_ec_submit_query(ec);
This facility is safer than the old CLEAR_ON_RESUME quirk as the
CLEAR_ON_RESUME quirk sends EC query commands unconditionally. The
behavior is apparently not suitable for firmware that requires
QUERY_HANDSHAKE quirk. Though the QUERY_HANDSHAKE quirk isn't used
now because of the improvement done in the EC transaction state
machine (ec_event_clearing=QUERY), it is the proof that we cannot
send EC query command unconditionally.
So it's time to delete the out-dated CLEAR_ON_RESUME quirk to let the
users to try the newer approach.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191211
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are issues related to the boot_ec:
1. If acpi_ec_remove() is invoked, boot_ec will also be freed, this is not
expected as the boot_ec could be enumerated via ECDT.
2. Address space handler installation/unstallation lead to unexpected _REG
evaluations.
This patch adds acpi_is_boot_ec() check to be used to fix the above issues.
However, since acpi_ec_remove() actually won't be invoked, this patch
doesn't handle the reference counting of "struct acpi_ec", it only ensures
the correctness of the boot_ec destruction during the boot.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153511
Reported-and-tested-by: Jonh Henderson <jw.hendy@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is possible to register _Qxx from namespace and use the ECDT EC to
perform event handling. The reported bug reveals that Windows is using ECDT
in this way in case the namespace EC is not present. This patch facilitates
Linux to support ECDT in this way.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the handler installation failed, there was no code to free the
allocated EC device. This patch fixes this memory leakage issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to support full ECDT (driving the ECDT EC after probing the
namespace EC), we need to change our EC device alloc/free algorithm, ensure
not to free old boot EC before qualifying new boot EC.
This patch achieves this by cleaning up first_ec/boot_ec logic:
1. first_ec: used to perform transactions, so it is assigned in new
acpi_ec_setup() function.
2. boot_ec: used to track early EC device, so it is assigned in new
acpi_config_boot_ec() function which explictly tells the driver to save
the EC device as early EC device.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch enables the event freeze mode, flushing the EC event handling in
.suspend() callback. This feature is experimental, if it is bisected out to
be the cause of the real issues, please report the issues to the kernel
bugzilla for further root causing and improvement.
This mode eliminates useless _Qxx handling during the power saving
operations, thus can help to tune the power saving operations faster. Tests
show that this mode can efficiently block flooding _Qxx during the suspend
process and tune the speed of the suspend faster.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the original EC driver, though the event handling is not explicitly
stopped, the EC driver is actually not able to handle events during the
noirq stage as the EC driver is not prepared to handle the EC events in the
polling mode. So if there is no advance_transaction() triggered, the EC
driver couldn't notice the EC events.
However, do we actually need to handle EC events during suspend/resume
stage? EC events are mostly useless for the suspend/resume period (key
strokes and battery/thermal updates, etc.,), and the useful ones (lid
close, power/sleep button press) should have already been delivered to the
OSPM to trigger the power saving operations.
Thus this patch implements acpi_ec_disable_event() to be a reverse call of
acpi_ec_enable_event(), with which, the EC driver is able to stop handling
the EC events in a position before entering the noirq stage.
Since there are actually 2 choices for us:
1. implement event handling in polling mode;
2. stop event handling before entering noirq stage.
And this patch only implements the second choice using .suspend() callback.
Thus this is experimental (first choice is better? or different hook
position is better?). This patch finally keeps the old behavior by default
and prepares a boot parameter to enable this feature.
The differences of the event handling availability between the old behavior
(this patch is not applied) and the new behavior (this patch is applied)
are as follows:
!FreezeEvents FreezeEvents
before suspend Y Y
suspend before EC Y Y
suspend after EC Y N
suspend_late Y N
suspend_noirq Y (actually N) N
resume_noirq Y (actually N) N
resume_late Y (actually N) N
resume before EC Y (actually N) N
resume after EC Y Y
after resume Y Y
Where "actually N" means if there is no EC transactions, the EC driver
is actually not able to notice the pending events.
We can see that FreezeEvents is the only approach now can actually flush
the EC event handling with both query commands and _Qxx evaluations
flushed, other modes can only flush the EC event handling with only query
commands flushed, _Qxx evaluations occurred after stopping the EC driver
may end up failure due to the failure of the EC transaction carried out in
the _Qxx control methods.
We also can see that this feature should be able to trigger some platform
notifications later than resuming other drivers.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch makes 2 changes:
1. Restore old behavior
Originally, EC driver stops handling both events and transactions in
acpi_ec_block_transactions(), and restarts to handle transactions in
acpi_ec_unblock_transactions_early(), restarts to handle both events and
transactions in acpi_ec_unblock_transactions().
While currently, EC driver still stops handling both events and
transactions in acpi_ec_block_transactions(), but restarts to handle both
events and transactions in acpi_ec_unblock_transactions_early().
This patch tries to restore the old behavior by dropping
__acpi_ec_enable_event() from acpi_unblock_transactions_early().
2. Improve old behavior
However this still cannot fix the real issue as both of the
acpi_ec_unblock_xxx() functions are invoked in the noirq stage. Since the
EC driver actually doesn't implement the event handling in the polling
mode, re-enabling the event handling too early in the noirq stage could
result in the problem that if there is no triggering source causing
advance_transaction() to be invoked, pending SCI_EVT cannot be detected by
the EC driver and _Qxx cannot be triggered.
It actually makes sense to restart the event handling in any point during
resuming after the noirq stage. Just like the boot stage where the event
handling is enabled in .add(), this patch further moves
acpi_ec_enable_event() to .resume(). After doing that, the following 2
functions can be combined:
acpi_ec_unblock_transactions_early()/acpi_ec_unblock_transactions().
The differences of the event handling availability between the old behavior
(this patch isn't applied) and the new behavior (this patch is applied) are
as follows:
!Applied Applied
before suspend Y Y
suspend before EC Y Y
suspend after EC Y Y
suspend_late Y Y
suspend_noirq Y (actually N) Y (actually N)
resume_noirq Y (actually N) Y (actually N)
resume_late Y (actually N) Y (actually N)
resume before EC Y (actually N) Y (actually N)
resume after EC Y (actually N) Y
after resume Y (actually N) Y
Where "actually N" means if there is no triggering source, the EC driver
is actually not able to notice the pending SCI_EVT occurred in the noirq
stage. So we can clearly see that this patch has improved the situation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After enabling the EC event handling, Linux is still in the noirq stage, if
there is no triggering source (EC transaction, GPE STS status),
advance_transaction() will not be invoked and SCI_EVT cannot be detected.
This patch adds one more triggering source after enabling the EC event
handling to poll the pending SCI_EVT.
Known issues:
1. Still no SCI_EVT triggering source
There could still be no SCI_EVT triggering source after handling the
first SCI_EVT (polled by this patch if any). Because after handling the
first SCI_EVT, Linux could still be in noirq stage and there could still
be no further triggering source in this stage. Then the second SCI_EVT
indicated during this stage still cannot be detected by the EC driver.
With this improvement applied, it is then possible to move
acpi_ec_enable_event() out of the noirq stage to fix this issue (if the
first SCI_EVT is handled out of the noirq stage, the follow-up SCI_EVTs
should be able to trigger IRQs).
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a hidden logic in the EC driver:
1. During boot, EC_FLAGS_QUERY_PENDING is responsible for blocking event
handling;
2. During suspend, EC_FLAGS_STARTED is responsible for blocking event
handling.
This patch uses a new EC_FLAGS_QUERY_ENABLED flag to make this hidden
logic explicit and have code cleaned up. No functional change.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that on some platforms, resume speed is not fast. The cause
is: in noirq stage, EC driver is working in polling mode, and each state
machine advancement requires a context switch.
The context switch is not necessary to the EC driver's polling mode. This
patch implements PM hooks to automatically switch the driver to/from the
busy polling mode to eliminate the overhead caused by the context switch.
This finally contributes to the tuning result: acpi_pm_finish() execution
time is improved from 192ms to 6ms.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A regression is caused by the following commit:
Commit: 02b771b64b
Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations
In this commit, using system workqueue causes that the maximum parallel
executions of _Qxx can exceed 255. This violates the method reentrancy
limit in ACPICA and generates the following error log:
ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341)
This patch creates a seperate workqueue and limits the number of parallel
_Qxx evaluations down to a configurable value (can be tuned against number
of online CPUs).
Since EC events are handled after driver probe, we can create the workqueue
in acpi_ec_init().
Fixes: 02b771b64b (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691
Cc: 4.3+ <stable@vger.kernel.org> # 4.3+
Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is an order issue in ec_remove_handlers() that acpi_ec_stop()
is called before removing the operation region handler. That is
incorrect, because the operation region handler removal triggers
_REG(DISCONNECT) which may result in new EC transactions to carry
out.
That existing issue has been triggered by the following commit:
Commit: dcf15cbded
Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC
which changed the driver to call ec_remove_handlers() after invoking
_REG(CONNECT), so the issue has become visible.
Fixes: dcf15cbded (ACPI / EC: Fix a boot EC regresion by restoring boot EC)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=102421
Reported-and-tested-by: Wolfram Sang <wsa@the-dreams.de>
Reported-by: Nicholas <nkudriavtsev@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Our Windows probe result shows that EC._REG is evaluated after evaluating
all _INI/_STA control methods.
With boot EC always switched in acpi_ec_dsdt_probe(), we can see that as
long as there is no EC opregion accesses in the MLC (module level code, AML
code out of any control methods) and in _INI/_STA, there is no need to make
sure that ECDT must be correct.
Bugs of 9399/12461 were reported against an order issue that BAT0/1._STA
evaluations contain EC accesses while the ECDT setting is wrong.
>From the acpidump output posted on bug 9399, we can see that it is actually
a different issue. In this table, if EC._REG is not executed, EC accesses
will be done in a platform specific manner. As we've already ensured not to
execute EC._REG during the eary stage, we can remove the quirks for bug
9399.
From the acpidump output posted on bug 12461, we can see that it still
needs the quirk. In this table, EC._REG flags a named object whose default
value is One, thus BAT1._STA surely should invoke EC accesses whatever we
invoke EC._REG or not. We have to keep the quirk for it before we can root
cause the issue.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Failure handling of the boot EC code is not tidy. This patch cleans
them up with acpi_ec_alloc().
This patch also changes acpi_ec_dsdt_probe(), always switches the
boot EC from the ECDT one to the DSDT one in this function.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the Windows probing result, during the table loading, the EC
device described in the ECDT should be used. And the ECDT EC is also
effective during the period the namespace objects are initialized (we can
see a separate process executing _STA/_INI on Windows before executing
other device specific control methods, for example, EC._REG). During the
device enumration, the EC device described in the DSDT should be used. But
there are differences between Linux and Windows around the device probing
order. Thus in Linux, we should enable the DSDT EC as early as possible
before enumerating devices in order not to trigger issues related to the
device enumeration order differences.
This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to
fix the gap. This also fixes a user reported regression triggered after we
switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant.
Fixes: 59f0aa9480 (ACPI 2.0 / ECDT: Remove early namespace reference from EC)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
