IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
hostfs creates a new inode for each opened or created file, which
created useless inode allocations and forbade identifying a host file
with a kernel inode.
Fix this uncommon filesystem behavior by tying kernel inodes to host
file's inode and device IDs. Even if the host filesystem inodes may be
recycled, this cannot happen while a file referencing it is opened,
which is the case with hostfs. It should be noted that hostfs inode IDs
may not be unique for the same hostfs superblock because multiple host's
(backed) superblocks may be used.
Delete inodes when dropping them to force backed host's file descriptors
closing.
This enables to entirely remove ARCH_EPHEMERAL_INODES, and then makes
Landlock fully supported by UML. This is very useful for testing
changes.
These changes also factor out and simplify some helpers thanks to the
new hostfs_inode_update() and the hostfs_iget() revamp: read_name(),
hostfs_create(), hostfs_lookup(), hostfs_mknod(), and
hostfs_fill_sb_common().
A following commit with new Landlock tests check this new hostfs inode
consistency.
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230612191430.339153-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
After working with the larger SELinux-based distros for several
years, we're finally at a place where we can disable the SELinux
runtime disable functionality. The existing kernel deprecation
notice explains the functionality and why we want to remove it:
The selinuxfs "disable" node allows SELinux to be disabled at
runtime prior to a policy being loaded into the kernel. If
disabled via this mechanism, SELinux will remain disabled until
the system is rebooted.
The preferred method of disabling SELinux is via the "selinux=0"
boot parameter, but the selinuxfs "disable" node was created to
make it easier for systems with primitive bootloaders that did not
allow for easy modification of the kernel command line.
Unfortunately, allowing for SELinux to be disabled at runtime makes
it difficult to secure the kernel's LSM hooks using the
"__ro_after_init" feature.
It is that last sentence, mentioning the '__ro_after_init' hardening,
which is the real motivation for this change, and if you look at the
diffstat you'll see that the impact of this patch reaches across all
the different LSMs, helping prevent tampering at the LSM hook level.
From a SELinux perspective, it is important to note that if you
continue to disable SELinux via "/etc/selinux/config" it may appear
that SELinux is disabled, but it is simply in an uninitialized state.
If you load a policy with `load_policy -i`, you will see SELinux
come alive just as if you had loaded the policy during early-boot.
It is also worth noting that the "/sys/fs/selinux/disable" file is
always writable now, regardless of the Kconfig settings, but writing
to the file has no effect on the system, other than to display an
error on the console if a non-zero/true value is written.
Finally, in the several years where we have been working on
deprecating this functionality, there has only been one instance of
someone mentioning any user visible breakage. In this particular
case it was an individual's kernel test system, and the workaround
documented in the deprecation notice ("selinux=0" on the kernel
command line) resolved the issue without problem.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce the LANDLOCK_ACCESS_FS_TRUNCATE flag for file truncation.
This flag hooks into the path_truncate, file_truncate and
file_alloc_security LSM hooks and covers file truncation using
truncate(2), ftruncate(2), open(2) with O_TRUNC, as well as creat().
This change also increments the Landlock ABI version, updates
corresponding selftests, and updates code documentation to document
the flag.
In security/security.c, allocate security blobs at pointer-aligned
offsets. This fixes the problem where one LSM's security blob can
shift another LSM's security blob to an unaligned address (reported
by Nathan Chancellor).
The following operations are restricted:
open(2): requires the LANDLOCK_ACCESS_FS_TRUNCATE right if a file gets
implicitly truncated as part of the open() (e.g. using O_TRUNC).
Notable special cases:
* open(..., O_RDONLY|O_TRUNC) can truncate files as well in Linux
* open() with O_TRUNC does *not* need the TRUNCATE right when it
creates a new file.
truncate(2) (on a path): requires the LANDLOCK_ACCESS_FS_TRUNCATE
right.
ftruncate(2) (on a file): requires that the file had the TRUNCATE
right when it was previously opened. File descriptors acquired by
other means than open(2) (e.g. memfd_create(2)) continue to support
truncation with ftruncate(2).
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Link: https://lore.kernel.org/r/20221018182216.301684-5-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Rename check_access_path_dual() to is_access_to_paths_allowed().
Make it return true iff the access is allowed.
Calculate the EXDEV/EACCES error code in the one place where it's needed.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20221018182216.301684-3-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
It seems that all code should use double backquotes, which is also used
to convert "%" defines. Let's use an homogeneous style and remove all
use of simple backquotes (which should only be used for emphasis).
Cc: Günther Noack <gnoack3000@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220923154207.3311629-4-mic@digikod.net
Now that we have more than one ABI version, make limitation explanation
more consistent by replacing "ABI 1" with "ABI < 2". This also
indicates which ABIs support such past limitation.
Improve documentation consistency by not using contractions.
Fix spelling in fs.c .
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20220923154207.3311629-3-mic@digikod.net
This change fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right
when multiple rulesets/domains are stacked. The expected behaviour was
that an additional ruleset can only restrict the set of permitted
operations, but in this particular case, it was potentially possible to
re-gain the LANDLOCK_ACCESS_FS_REFER right.
With the introduction of LANDLOCK_ACCESS_FS_REFER, we added the first
globally denied-by-default access right. Indeed, this lifted an initial
Landlock limitation to rename and link files, which was initially always
denied when the source or the destination were different directories.
This led to an inconsistent backward compatibility behavior which was
only taken into account if no domain layer were using the new
LANDLOCK_ACCESS_FS_REFER right. However, when restricting a thread with
a new ruleset handling LANDLOCK_ACCESS_FS_REFER, all inherited parent
rulesets/layers not explicitly handling LANDLOCK_ACCESS_FS_REFER would
behave as if they were handling this access right and with all their
rules allowing it. This means that renaming and linking files could
became allowed by these parent layers, but all the other required
accesses must also be granted: all layers must allow file removal or
creation, and renaming and linking operations cannot lead to privilege
escalation according to the Landlock policy. See detailed explanation
in commit b91c3e4ea7 ("landlock: Add support for file reparenting with
LANDLOCK_ACCESS_FS_REFER").
To say it another way, this bug may lift the renaming and linking
limitations of the initial Landlock version, and a same ruleset can
enforce different restrictions depending on previous or next enforced
ruleset (i.e. inconsistent behavior). The LANDLOCK_ACCESS_FS_REFER right
cannot give access to data not already allowed, but this doesn't follow
the contract of the first Landlock ABI. This fix puts back the
limitation for sandboxes that didn't opt-in for this additional right.
For instance, if a first ruleset allows LANDLOCK_ACCESS_FS_MAKE_REG on
/dst and LANDLOCK_ACCESS_FS_REMOVE_FILE on /src, renaming /src/file to
/dst/file is denied. However, without this fix, stacking a new ruleset
which allows LANDLOCK_ACCESS_FS_REFER on / would now permit the
sandboxed thread to rename /src/file to /dst/file .
This change fixes the (absolute) rule access rights, which now always
forbid LANDLOCK_ACCESS_FS_REFER except when it is explicitly allowed
when creating a rule.
Making all domain handle LANDLOCK_ACCESS_FS_REFER was an initial
approach but there is two downsides:
* it makes the code more complex because we still want to check that a
rule allowing LANDLOCK_ACCESS_FS_REFER is legitimate according to the
ruleset's handled access rights (i.e. ABI v1 != ABI v2);
* it would not allow to identify if the user created a ruleset
explicitly handling LANDLOCK_ACCESS_FS_REFER or not, which will be an
issue to audit Landlock.
Instead, this change adds an ACCESS_INITIALLY_DENIED list of
denied-by-default rights, which (only) contains
LANDLOCK_ACCESS_FS_REFER. All domains are treated as if they are also
handling this list, but without modifying their fs_access_masks field.
A side effect is that the errno code returned by rename(2) or link(2)
*may* be changed from EXDEV to EACCES according to the enforced
restrictions. Indeed, we now have the mechanic to identify if an access
is denied because of a required right (e.g. LANDLOCK_ACCESS_FS_MAKE_REG,
LANDLOCK_ACCESS_FS_REMOVE_FILE) or if it is denied because of missing
LANDLOCK_ACCESS_FS_REFER rights. This may result in different errno
codes than for the initial Landlock version, but this approach is more
consistent and better for rename/link compatibility reasons, and it
wasn't possible before (hence no backport to ABI v1). The
layout1.rename_file test reflects this change.
Add 4 layout1.refer_denied_by_default* test suites to check that the
behavior of a ruleset not handling LANDLOCK_ACCESS_FS_REFER (ABI v1) is
unchanged even if another layer handles LANDLOCK_ACCESS_FS_REFER (i.e.
ABI v1 precedence). Make sure rule's absolute access rights are correct
by testing with and without a matching path. Add test_rename() and
test_exchange() helpers.
Extend layout1.inval tests to check that a denied-by-default access
right is not necessarily part of a domain's handled access rights.
Test coverage for security/landlock is 95.3% of 599 lines according to
gcc/gcov-11.
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20220831203840.1370732-1-mic@digikod.net
Cc: stable@vger.kernel.org
[mic: Constify and slightly simplify test helpers]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new LANDLOCK_ACCESS_FS_REFER access right to enable policy writers
to allow sandboxed processes to link and rename files from and to a
specific set of file hierarchies. This access right should be composed
with LANDLOCK_ACCESS_FS_MAKE_* for the destination of a link or rename,
and with LANDLOCK_ACCESS_FS_REMOVE_* for a source of a rename. This
lift a Landlock limitation that always denied changing the parent of an
inode.
Renaming or linking to the same directory is still always allowed,
whatever LANDLOCK_ACCESS_FS_REFER is used or not, because it is not
considered a threat to user data.
However, creating multiple links or renaming to a different parent
directory may lead to privilege escalations if not handled properly.
Indeed, we must be sure that the source doesn't gain more privileges by
being accessible from the destination. This is handled by making sure
that the source hierarchy (including the referenced file or directory
itself) restricts at least as much the destination hierarchy. If it is
not the case, an EXDEV error is returned, making it potentially possible
for user space to copy the file hierarchy instead of moving or linking
it.
Instead of creating different access rights for the source and the
destination, we choose to make it simple and consistent for users.
Indeed, considering the previous constraint, it would be weird to
require such destination access right to be also granted to the source
(to make it a superset). Moreover, RENAME_EXCHANGE would also add to
the confusion because of paths being both a source and a destination.
See the provided documentation for additional details.
New tests are provided with a following commit.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-8-mic@digikod.net
In order to be able to identify a file exchange with renameat2(2) and
RENAME_EXCHANGE, which will be useful for Landlock [1], propagate the
rename flags to LSMs. This may also improve performance because of the
switch from two set of LSM hook calls to only one, and because LSMs
using this hook may optimize the double check (e.g. only one lock,
reduce the number of path walks).
AppArmor, Landlock and Tomoyo are updated to leverage this change. This
should not change the current behavior (same check order), except
(different level of) speed boosts.
[1] https://lore.kernel.org/r/20220221212522.320243-1-mic@digikod.net
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Serge E. Hallyn <serge@hallyn.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-7-mic@digikod.net
Move the SB_NOUSER and IS_PRIVATE dentry check to a standalone
is_nouser_or_private() helper. This will be useful for a following
commit.
Move get_mode_access() and maybe_remove() to make them usable by new
code provided by a following commit.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-6-mic@digikod.net
The original behavior was to check if the full set of requested accesses
was allowed by at least a rule of every relevant layer. This didn't
take into account requests for multiple accesses and same-layer rules
allowing the union of these accesses in a complementary way. As a
result, multiple accesses requested on a file hierarchy matching rules
that, together, allowed these accesses, but without a unique rule
allowing all of them, was illegitimately denied. This case should be
rare in practice and it can only be triggered by the path_rename or
file_open hook implementations.
For instance, if, for the same layer, a rule allows execution
beneath /a/b and another rule allows read beneath /a, requesting access
to read and execute at the same time for /a/b should be allowed for this
layer.
This was an inconsistency because the union of same-layer rule accesses
was already allowed if requested once at a time anyway.
This fix changes the way allowed accesses are gathered over a path walk.
To take into account all these rule accesses, we store in a matrix all
layer granting the set of requested accesses, according to the handled
accesses. To avoid heap allocation, we use an array on the stack which
is 2*13 bytes. A following commit bringing the LANDLOCK_ACCESS_FS_REFER
access right will increase this size to reach 112 bytes (2*14*4) in case
of link or rename actions.
Add a new layout1.layer_rule_unions test to check that accesses from
different rules pertaining to the same layer are ORed in a file
hierarchy. Also test that it is not the case for rules from different
layers.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The maximum number of nested Landlock domains is currently 64. Because
of the following fix and to help reduce the stack size, let's reduce it
to 16. This seems large enough for a lot of use cases (e.g. sandboxed
init service, spawning a sandboxed SSH service, in nested sandboxed
containers). Reducing the number of nested domains may also help to
discover misuse of Landlock (e.g. creating a domain per rule).
Add and use a dedicated layer_mask_t typedef to fit with the number of
layers. This might be useful when changing it and to keep it consistent
with the maximum number of layers.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Create and use the access_mask_t typedef to enforce a consistent access
mask size and uniformly use a 16-bits type. This will helps transition
to a 32-bits value one day.
Add a build check to make sure all (filesystem) access rights fit in.
This will be extended with a following commit.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-2-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
According to the Landlock goal to be a security feature available to
unprivileges processes, it makes more sense to first check for
no_new_privs before checking anything else (i.e. syscall arguments).
Merge inval_fd_enforce and unpriv_enforce_without_no_new_privs tests
into the new restrict_self_checks_ordering. This is similar to the
previous commit checking other syscalls.
Link: https://lore.kernel.org/r/20220506160820.524344-10-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This makes more sense to first check the ruleset FD and then the rule
attribute. It will be useful to factor out code for other rule types.
Add inval_add_rule_arguments tests, extension of empty_path_beneath_attr
tests, to also check error ordering for landlock_add_rule(2).
Link: https://lore.kernel.org/r/20220506160820.524344-9-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Let's follow a consistent and documented coding style. Everything may
not be to our liking but it is better than tacit knowledge. Moreover,
this will help maintain style consistency between different developers.
This contains only whitespace changes.
Automatically formatted with:
clang-format-14 -i security/landlock/*.[ch] include/uapi/linux/landlock.h
Link: https://lore.kernel.org/r/20220506160513.523257-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
In preparation to a following commit, add clang-format on and
clang-format off stanzas around constant definitions. This enables to
keep aligned values, which is much more readable than packed
definitions.
Link: https://lore.kernel.org/r/20220506160513.523257-2-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Make the name of the anon inode fd "[landlock-ruleset]" instead of
"landlock-ruleset". This is minor but most anon inode fds already
carry square brackets around their name:
[eventfd]
[eventpoll]
[fanotify]
[fscontext]
[io_uring]
[pidfd]
[signalfd]
[timerfd]
[userfaultfd]
For the sake of consistency lets do the same for the landlock-ruleset anon
inode fd that comes with landlock. We did the same in
1cdc415f10 ("uapi, fsopen: use square brackets around "fscontext" [ver #2]")
for the new mount api.
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20211011133704.1704369-1-brauner@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Add a new flag LANDLOCK_CREATE_RULESET_VERSION to
landlock_create_ruleset(2). This enables to retreive a Landlock ABI
version that is useful to efficiently follow a best-effort security
approach. Indeed, it would be a missed opportunity to abort the whole
sandbox building, because some features are unavailable, instead of
protecting users as much as possible with the subset of features
provided by the running kernel.
This new flag enables user space to identify the minimum set of Landlock
features supported by the running kernel without relying on a filesystem
interface (e.g. /proc/version, which might be inaccessible) nor testing
multiple syscall argument combinations (i.e. syscall bisection). New
Landlock features will be documented and tied to a minimum version
number (greater than 1). The current version will be incremented for
each new kernel release supporting new Landlock features. User space
libraries can leverage this information to seamlessly restrict processes
as much as possible while being compatible with newer APIs.
This is a much more lighter approach than the previous
landlock_get_features(2): the complexity is pushed to user space
libraries. This flag meets similar needs as securityfs versions:
selinux/policyvers, apparmor/features/*/version* and tomoyo/version.
Supporting this flag now will be convenient for backward compatibility.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-14-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
These 3 system calls are designed to be used by unprivileged processes
to sandbox themselves:
* landlock_create_ruleset(2): Creates a ruleset and returns its file
descriptor.
* landlock_add_rule(2): Adds a rule (e.g. file hierarchy access) to a
ruleset, identified by the dedicated file descriptor.
* landlock_restrict_self(2): Enforces a ruleset on the calling thread
and its future children (similar to seccomp). This syscall has the
same usage restrictions as seccomp(2): the caller must have the
no_new_privs attribute set or have CAP_SYS_ADMIN in the current user
namespace.
All these syscalls have a "flags" argument (not currently used) to
enable extensibility.
Here are the motivations for these new syscalls:
* A sandboxed process may not have access to file systems, including
/dev, /sys or /proc, but it should still be able to add more
restrictions to itself.
* Neither prctl(2) nor seccomp(2) (which was used in a previous version)
fit well with the current definition of a Landlock security policy.
All passed structs (attributes) are checked at build time to ensure that
they don't contain holes and that they are aligned the same way for each
architecture.
See the user and kernel documentation for more details (provided by a
following commit):
* Documentation/userspace-api/landlock.rst
* Documentation/security/landlock.rst
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20210422154123.13086-9-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Using Landlock objects and ruleset, it is possible to tag inodes
according to a process's domain. To enable an unprivileged process to
express a file hierarchy, it first needs to open a directory (or a file)
and pass this file descriptor to the kernel through
landlock_add_rule(2). When checking if a file access request is
allowed, we walk from the requested dentry to the real root, following
the different mount layers. The access to each "tagged" inodes are
collected according to their rule layer level, and ANDed to create
access to the requested file hierarchy. This makes possible to identify
a lot of files without tagging every inodes nor modifying the
filesystem, while still following the view and understanding the user
has from the filesystem.
Add a new ARCH_EPHEMERAL_INODES for UML because it currently does not
keep the same struct inodes for the same inodes whereas these inodes are
in use.
This commit adds a minimal set of supported filesystem access-control
which doesn't enable to restrict all file-related actions. This is the
result of multiple discussions to minimize the code of Landlock to ease
review. Thanks to the Landlock design, extending this access-control
without breaking user space will not be a problem. Moreover, seccomp
filters can be used to restrict the use of syscall families which may
not be currently handled by Landlock.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-8-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Using ptrace(2) and related debug features on a target process can lead
to a privilege escalation. Indeed, ptrace(2) can be used by an attacker
to impersonate another task and to remain undetected while performing
malicious activities. Thanks to ptrace_may_access(), various part of
the kernel can check if a tracer is more privileged than a tracee.
A landlocked process has fewer privileges than a non-landlocked process
and must then be subject to additional restrictions when manipulating
processes. To be allowed to use ptrace(2) and related syscalls on a
target process, a landlocked process must have a subset of the target
process's rules (i.e. the tracee must be in a sub-domain of the tracer).
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-5-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Process's credentials point to a Landlock domain, which is underneath
implemented with a ruleset. In the following commits, this domain is
used to check and enforce the ptrace and filesystem security policies.
A domain is inherited from a parent to its child the same way a thread
inherits a seccomp policy.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-4-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
A Landlock ruleset is mainly a red-black tree with Landlock rules as
nodes. This enables quick update and lookup to match a requested
access, e.g. to a file. A ruleset is usable through a dedicated file
descriptor (cf. following commit implementing syscalls) which enables a
process to create and populate a ruleset with new rules.
A domain is a ruleset tied to a set of processes. This group of rules
defines the security policy enforced on these processes and their future
children. A domain can transition to a new domain which is the
intersection of all its constraints and those of a ruleset provided by
the current process. This modification only impact the current process.
This means that a process can only gain more constraints (i.e. lose
accesses) over time.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20210422154123.13086-3-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
A Landlock object enables to identify a kernel object (e.g. an inode).
A Landlock rule is a set of access rights allowed on an object. Rules
are grouped in rulesets that may be tied to a set of processes (i.e.
subjects) to enforce a scoped access-control (i.e. a domain).
Because Landlock's goal is to empower any process (especially
unprivileged ones) to sandbox themselves, we cannot rely on a
system-wide object identification such as file extended attributes.
Indeed, we need innocuous, composable and modular access-controls.
The main challenge with these constraints is to identify kernel objects
while this identification is useful (i.e. when a security policy makes
use of this object). But this identification data should be freed once
no policy is using it. This ephemeral tagging should not and may not be
written in the filesystem. We then need to manage the lifetime of a
rule according to the lifetime of its objects. To avoid a global lock,
this implementation make use of RCU and counters to safely reference
objects.
A following commit uses this generic object management for inodes.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-2-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
