IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add additional information on the semantics of the size fields in
struct drm_mode_config. Also add a TODO to review all driver for
correct usage of these fields.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-10-tzimmermann@suse.de
this callback was used by drm_kms_helper_hotplug_event()
V2: (Thanks for Daniel's suggestions)
- remove the FIXME below.since with the drm_client
- infrastructure and the generic fbdev emulation we've
- resolved this all very neatly now.
V3: Add comments that This hook is deprecated
- new implementation methods instead of this hook
v4: used by drm_kms_helper_hotplug_event()
- drm_fb_helper_hotplug_changed() is not found
instead by drm_kms_helper_hotplug_event()
Signed-off-by: ZhiJie.Zhang <zhangzhijie@loongson.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903032402.11935-1-zhangzhijie@loongson.cn
It's very confusing for userspace to have to deal with inconsistencies
here, and some drivers screwed this up a bit. Most just ommitted the
format list when they meant to say that only linear modifier is
allowed, but some also meant that only implied modifiers are
acceptable (because actually none of the planes registered supported
modifiers).
Now that this is all done consistently across all drivers, document
the rules and enforce it in the drm core.
v2:
- Make the capability a link (Simon)
- Note that all is lost before 5.1.
v3:
- Use drm_WARN_ON (Lyude)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Cc: Simon Ser <contact@emersion.fr>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506132343.2873699-1-daniel.vetter@ffwll.ch
At least sparc64 requires I/O-specific access to framebuffers. This
patch updates the fbdev console accordingly.
For drivers with direct access to the framebuffer memory, the callback
functions in struct fb_ops test for the type of memory and call the rsp
fb_sys_ of fb_cfb_ functions. Read and write operations are implemented
internally by DRM's fbdev helper.
For drivers that employ a shadow buffer, fbdev's blit function retrieves
the framebuffer address as struct dma_buf_map, and uses dma_buf_map
interfaces to access the buffer.
The bochs driver on sparc64 uses a workaround to flag the framebuffer as
I/O memory and avoid a HW exception. With the introduction of struct
dma_buf_map, this is not required any longer. The patch removes the rsp
code from both, bochs and fbdev.
v7:
* use min_t(size_t,) (kernel test robot)
* return the number of bytes read/written, if any (fbdev testcase)
v5:
* implement fb_read/fb_write internally (Daniel, Sam)
v4:
* move dma_buf_map changes into separate patch (Daniel)
* TODO list: comment on fbdev updates (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-11-tzimmermann@suse.de
Even for legacy userspace, since otherwise GETFB2 is broken and if you
switch between modifier-less and modifier-aware compositors, smooth
transitions break.
Also it's just best practice to make sure modifiers are invariant for
a given drm_fb, and that a modifier-aware kms drivers only has one
place to store them, ignoring any old implicit bo flags or whatever
else might float around.
Motivated by some irc discussion with Bas about amdgpu modifier
support.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fixes: 455e00f141 ("drm: Add getfb2 ioctl")
Cc: Daniel Stone <daniels@collabora.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Marek Olšák <maraeo@gmail.com>
Cc: "Wentland, Harry" <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917164721.2038541-1-daniel.vetter@ffwll.ch
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Currently, downstream port type is only reported in debugfs. This
information should be considered important since it reflects the actual
physical connector type. Some userspace (e.g. window compositors)
may want to show this info to a user.
The 'subconnector' property is already utilized for DVI-I and TV-out for
reporting connector subtype.
The initial motivation for this feature came from i2c test [1].
It is supposed to be skipped on VGA connectors, but it cannot
detect VGA over DP and fails instead.
v2:
- Ville: utilized drm_dp_is_branch()
- Ville: implement DP 1.0 downstream type info
- Replaced create_dp_properties with add_dp_subconnector_property
- Added dp_set_subconnector_property helper
v4:
- Ville: add DP1.0 best assumption about subconnector
- Ville: assume DVI is DVI-D
- Ville: reuse Writeback enum value for Virtual subconnector
- Renamed #defines: HDMI -> HDMIA, DP -> DisplayPort
v5: rebase
v6:
- Jani Nikula: renamed a function name
- Jani Nikula: addressed the issues with documentation
[1]: https://bugs.freedesktop.org/show_bug.cgi?id=104097
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-1-git-send-email-jeevan.b@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8nLmkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBEkH/RJAnEan4gcdkBDf
2xS0yk4XLMjKZwbz61VSeKMUBkGCsh1cWsaAtJJAIVYj/6o/7mld01sZCnOASLnJ
ET0nXL2NiT/f+prYkTE5qeYH225/Yfh5jgmrqZtx/uXFCwgE5Nzi3f72IXQDmCR+
kmpNhNox3YqQTKXhv7DXobDKcO0n8nZavnhxmA9SBZn2h9RHvmvJghD0UOfLjMpA
1SbknaE67n5JN/JjI6TkYWk4nuJmqfvmBL5IYVDEZYO4UlM5Bqzhw0XN7Ax70K3M
KRK/eiqRmNwun5MxWnbzQU7t7iTgVmzjHLTpWGcM3V4blgGXC3uhjc+p/R8KTQUE
bIydSzs=
=fDeo
-----END PGP SIGNATURE-----
Merge tag 'v5.8' into drm-next
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac4f ("drm/bochs: switch to generic drm fbdev emulation").
The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.
The fix is to replace the memcpy with memcpy_toio() from io.h.
memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().
The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.
Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.
v3:
- Improved changelog (Daniel)
- Added FIXME to fbdev_use_iomem (Daniel)
v2:
- Added missing __iomem cast (kernel test robot)
- Made changelog readable and fix typos (Mark)
- Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
drm_mode_config_cleanup is idempotent, so no harm in calling this
twice. This allows us to gradually switch drivers over by removing
explicit drm_mode_config_cleanup calls.
With this step it's now also possible that (at least for simple
drivers) automatic resource cleanup can be done correctly without a
drm_driver->release hook. Therefore allow this now in
devm_drm_dev_init().
Also with drmm_ explicit drm_driver->release hooks are kinda not the
best option: Drivers can always just register their current release
hook with drmm_add_action, but even better they could split them up to
simplify the unwinding for the driver load failure case. So deprecate
that hook to discourage future users.
v2: Fixup the example in the kerneldoc too.
v3:
- For paranoia, double check that minor->dev == dev in the release
hook, because I botched the pointer math in the drmm library.
- Call drm_mode_config_cleanup when drmm_add_action fails, we'd be
missing some mutex_destroy and ida_cleanup otherwise (Laurent)
v4: Add a drmm_add_action_or_reset (like devm_ has) to encapsulate this
pattern (Noralf).
v5: Fix oversight in the new drmm_add_action_or_reset macro (Noralf)
v4: Review from Sam:
- drmm_mode_config_init wrapper (also suggested by Thomas)
- improve commit message, explain better why ->relase is deprecated
v5:
- Make drmm_ the main function, with the old one as compat wrapper
(Sam)
- Add FIXME comments to drm_mode_config_cleanup/init() that drivers
shouldn't use these anymore.
- Move drmm_add_action_or_reset helper to an earlier patch.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-27-daniel.vetter@ffwll.ch
This patch adds a DRM ENUM property to the selected connectors.
This property is used for mentioning the protected content's type
from userspace to kernel HDCP authentication.
Type of the stream is decided by the protected content providers.
Type 0 content can be rendered on any HDCP protected display wires.
But Type 1 content can be rendered only on HDCP2.2 protected paths.
So when a userspace sets this property to Type 1 and starts the HDCP
enable, kernel will honour it only if HDCP2.2 authentication is through
for type 1. Else HDCP enable will be failed.
Pekka have completed the Weston DRM-backend review in
https://gitlab.freedesktop.org/wayland/weston/merge_requests/48
and the UAPI for HDCP 2.2 looks good.
The userspace is accepted in Weston.
v2:
cp_content_type is replaced with content_protection_type [daniel]
check at atomic_set_property is removed [Maarten]
v3:
%s/content_protection_type/hdcp_content_type [Pekka]
v4:
property is created for the first requested connector and then reused.
[Danvet]
v5:
kernel doc nits addressed [Daniel]
Rebased as part of patch reordering.
v6:
Kernel docs are modified [pekka]
v7:
More details in Kernel docs. [pekka]
v8:
Few more clarification into kernel doc of content type [pekka]
v9:
Small fixes in coding style.
v10:
Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
Fixes the following warnings:
./include/drm/drm_mode_config.h:841: warning: Incorrect use of
kernel-doc format: * hdr_output_metadata_property: Connector
property containing hdr
./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector'
Also adds some property documentation for HDR Metadata Connector
Property in connector property create function.
v2: Fixed Sean Paul's review comments.
v3: Fixed Daniel Vetter's review comments, added the UAPI structure
definition section in kernel docs.
v4: Fixed Daniel Vetter's review comments.
v5: Added structure member references as per Daniel's suggestion.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Sean Paul <sean@poorly.run> (v1)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
[danvet: Fix up markup: () for functions, & for structs. Style guide
also recommends to prepend struct for structures.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
-----BEGIN PGP SIGNATURE-----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=U/nc
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgt3n45z.fsf@intel.com
This patch adds a blob property to get HDR metadata
information from userspace. This will be send as part
of AVI Infoframe to panel.
It also implements get() and set() functions for HDR output
metadata property.The blob data is received from userspace and
saved in connector state, the same is returned as blob in get
property call to userspace.
v2: Rebase and modified the metadata structure elements
as per Ville's POC changes.
v3: No Change
v4: Addressed Shashank's review comments
v5: Rebase.
v6: Addressed Brian Starkey's review comments, defined
new structure with header for dynamic metadata scalability.
Merge get/set property functions for metadata in this patch.
v7: Addressed Jonas Karlman review comments and defined separate
structure for infoframe to better align with CTA 861.G spec. Added
Shashank's RB.
v8: Addressed Ville's review comments. Moved sink metadata structure
out of uapi headers as suggested by Jonas Karlman.
v9: Rebase and addressed Jonas Karlman review comments.
v10: Addressed Ville's review comments, dropped the metdata_changed
state variable as its not needed anymore.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-2-git-send-email-uma.shankar@intel.com
Content protection property is created once and stored in
drm_mode_config. And attached to all HDCP capable connectors.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-2-ramalingam.c@intel.com
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDOTqAAKCRDj7w1vZxhR
xZ8QAQD4j8m9Ea3bzY5Rr8BYUx1k+Cjj6Y6abZmot2rSvdyOHwD+JzJFIFAPZjdd
uOKhLnDlubaaoa6OGPDQShjl9p3gyQE=
=WQGO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
This patch solves this TODO task:
drm_mode_config.crtc_idr is misnamed, since it contains all KMS object.
Should be renamed to drm_mode_config.object_idr.
Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
[danvet: resolve conflict with addition of privobj_list.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213212957.vkitkyl5cj2qh7qr@smtp.gmail.com
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions
on the plane in framebuffer coordinates of the framebuffer attached to
the plane.
The layout of blob data is simply an array of "struct drm_mode_rect".
Unlike plane src coordinates, damage clips are not in 16.16 fixed point.
As plane src in framebuffer cannot be negative so are damage clips. In
damage clip, x1/y1 are inclusive and x2/y2 are exclusive.
This patch also exports the kernel internal drm_rect to userspace as
drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient
to represent damage for current plane size.
Driver which are interested in enabling FB_DAMAGE_CLIPS property for a
plane should enable this property using drm_plane_enable_damage_clips.
v2:
- Input validation on damage clips against framebuffer size.
- Doc update, other minor changes.
Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This patch introduces the 'vrr_enabled' CRTC property to allow
dynamic control over variable refresh rate support for a CRTC.
This property should be treated like a content hint to the driver -
if the hardware or driver is not capable of driving variable refresh
timings then this is not considered an error.
Capability for variable refresh rate support should be determined
by querying the vrr_capable drm connector property.
It is worth noting that while the property is intended for atomic use
it isn't filtered from legacy userspace queries. This allows for Xorg
userspace drivers to implement support.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a function to check whether there is at least one plane that
supports a specific format and modifier combination. Drivers can
use this to reject unsupported formats/modifiers in .fb_create().
v2: Accept anyformat if the driver doesn't do planes (Eric)
s/planes_have_format/any_plane_has_format/ (Eric)
Check the modifier as well since we already have a function
that does both
v3: Don't do the check in the core since we may not know the
modifier yet, instead export the function and let drivers
call it themselves
Cc: Eric Anholt <eric@anholt.net>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-1-ville.syrjala@linux.intel.com
Userspace on big endian machhines typically expects the ADDFB ioctl
returns a big endian framebuffer. drm_mode_addfb() will call
drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_*
values though, which is wrong. This patch fixes that.
Drivers (both kernel and xorg) have quirks in place to deal with the
broken drm_mode_addfb() behavior. Because of this we can't just change
drm_mode_addfb() behavior for everybody without breaking things. Add
the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers
can opt-in.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-5-kraxel@redhat.com
The meaning of the mode_config max_width/height fields has not been
entirely clear. They are used both as the max framebuffer dimensions,
and they are also used by drm_mode_getconnector() to filter out
any mode whose hdisplay/vdisplay exceed those limits.
Let's put it in writing that max_width/height only refrer to the max
framebuffer dimensions, and should those be higher than the hardware
limits for display timings the driver must validate the latter using
some other means.
We'll keep the max_width/height usage in drm_mode_getconnector()
because setcrtc treats hdisplay/vdisplay also as the primary plane
width, and having a plane bigger than the max fb size doesn't make
much sense (if we ignore scaling that is). It all works out fine
as long as the max fb dimensions are at least equal to the max
timing limits. If the opposite were true we may want to rethink
what drm_mode_getconnector() does. Maybe do the mode filtering
only for non-atomic userspace?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615173939.11353-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to
enable userspace to get a fence which will signal once the writeback is
complete. It is not allowed to request an out-fence without a
framebuffer attached to the connector.
A timeline is added to drm_writeback_connector for use by the writeback
out-fences.
In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence
is set to -1.
Changes from v2:
- Rebase onto Gustavo Padovan's v9 explicit sync series
- Change out_fence_ptr type to s32 __user *
- Set *out_fence_ptr to -1 in drm_atomic_connector_set_property
- Store fence in drm_writeback_job
Gustavo Padovan:
- Move out_fence_ptr out of connector_state
- Signal fence from drm_writeback_signal_completion instead of
in driver directly
Changes from v3:
- Rebase onto commit 7e9081c5aa ("drm/fence: fix memory overwrite
when setting out_fence fd") (change out_fence_ptr to s32 __user *,
for real this time.)
- Update documentation around WRITEBACK_OUT_FENCE_PTR
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/229036/
Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.
Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().
Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.
When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.
Changes since v1:
- Added drm_writeback.c + documentation
- Added helper to initialize writeback connector in one go
- Added core checks
- Squashed into a single commit
- Dropped the client cap
- Writeback framebuffers are no longer persistent
Changes since v2:
Daniel Vetter:
- Subclass drm_connector to drm_writeback_connector
- Relax check to allow CRTC to be set without an FB
- Add some writeback_ prefixes
- Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
Gustavo Padovan:
- Add drm_writeback_job to handle writeback signalling centrally
Changes since v3:
- Rebased
- Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS
Chances since v4:
- Embed a drm_encoder inside the drm_writeback_connector to
reduce the amount of boilerplate code required from the drivers
that are using it.
Changes since v5:
- Added Rob Clark's atomic_commit() vfunc to connector helper
funcs, so that writeback jobs are committed from atomic helpers
- Updated create_writeback_properties() signature to return an
error code rather than a boolean false for failure.
- Free writeback job with the connector state rather than when
doing the cleanup_work()
Changes since v7:
- fix extraneous use of out_fence that is only introduced in a
subsequent patch.
Changes since v8:
- whitespace changes pull from subsequent patch
Changes since v9:
- Revert the v6 changes that free the writeback job in the connector
state cleanup and return to doing it in the cleanup_work() function
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/
Added content_type property to drm_connector_state
in order to properly handle external HDMI TV content-type setting.
v2:
* Moved helper function which attaches content type property
to the drm core, as was suggested.
Removed redundant connector state initialization.
v3:
* Removed caps in drm_content_type_enum_list.
After some discussion it turned out that HDMI Spec 1.4
was wrongly assuming that IT Content(itc) bit doesn't affect
Content type states, however itc bit needs to be manupulated
as well. In order to not expose additional property for itc,
for sake of simplicity it was decided to bind those together
in same "content type" property.
v4:
* Added it_content checking in intel_digital_connector_atomic_check.
Fixed documentation for new content type enum.
v5:
* Moved patch revision's description to commit messages.
v6:
* Minor naming fix for the content type enumeration string.
v7:
* Fix parameter name for documentation and parameter alignment
in order not to get warning. Added Content Type description to
new HDMI connector properties section.
v8:
* Thrown away unneeded numbers from HDMI content-type property
description. Switch to strings desription instead of plain
definitions.
v9:
* Moved away hdmi specific content-type enum from
drm_connector_state. Content type property should probably not
be bound to any specific connector interface in
drm_connector_state.
Same probably should be done to hdmi_picture_aspect_ration enum
which is also contained in drm_connector_state. Added special
helper function to get derive hdmi specific relevant infoframe
fields.
v10:
* Added usage description to HDMI properties kernel doc.
v11:
* Created centralized function for filling HDMI AVI infoframe, based
on correspondent DRM property value.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com
[vsyrjala: clean up checkpatch multiple blank lines warnings]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Instead of drivers duplicating the drm_atomic_helper_check() code to be
able to normalize the zpos they can use the normalize_zpos flag to let the
drm core to do it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-2-peter.ujfalusi@ti.com
Allow drivers to provide a device wide .mode_valid() hook in addition to
the already existing crtc/encoder/bridge/connector hooks. This can be
used to validate device/driver wide constraings without having to add
those to the other hooks. And since we call this hook also for user
modes later on in the modeset we don't have to worry about anything the
hook has already rejected.
I also have some further ideas for this hook. Eg. we could replace the
drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc.
with a driver specific variant via this hook. At least on i915 we would
like to pass CRTC_STEREO_DOUBLE to that function instead, and then
we could safely use the crtc_ timings in all our .mode_valid() hooks,
which would allow us to reuse those hooks for validating the
adjusted_mode during a modeset.
v2: Fix the language fails in the kernel docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Core Changes:
- mostly doc updates and some fbdev improvements
-----BEGIN PGP SIGNATURE-----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=AxYV
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.16:
Core Changes:
- mostly doc updates and some fbdev improvements
* tag 'drm-misc-next-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm/framebuffer: Print task that allocated the fb in debug info.
drm/fb-helper: Add drm_fb_helper_defio_init()
drm/fb-helper: Update DOC with new helpers
drm/docs: Add todo entry for drm_fb_helper_fbdev_setup()
drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()
drm/fb-helper: Set/clear dev->fb_helper in dummy init/fini
drm/stm: ltdc: Remove unnecessary platform_get_resource() error check
drm/stm: dsi: Remove unnecessary platform_get_resource() error check
drm/doc: Move legacy kms helpers to the very end
drm/atomic: document how to handle driver private objects
drm/syncobj: some kerneldoc polish
drm/print: Unconfuse kerneldoc
drm/edid: kerneldoc for is_hdmi2_sink
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaNy81AAoJEHm+PkMAQRiGq2YH/1C1so18qErhPosdfeLIXLbA
iC9XcIvkPuMfjDw4EfSWOzhKnzgqGuc8q/Vzz0ulDreNVUb52nBeRy69QgNoZBTB
NkLdrUKBnlArvRhBXToQGW/s1eI/gobuHBJb7/fbpvsUtPYcDE2nUXAEsMlagn5L
BMHNzE3TByaWj0SqJtZAZvaQN2MdWV8ArHBPaC+MtR2C1VJIyl0mT9CdCu2NpTES
+FncKJ6/qplSBNSUJSfYmFLfEKVcQxvHMi1kp9jOGlVjPM3cOPKRpv8x69x/IPoB
3l82AikL+Ju0738oJ0Fp/IhfGUqpXz+FwUz1JmCdrcOby75RHomJuJCUBTtjXA4=
=lYkx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc4' into drm-next
Linux 4.15-rc4
Daniel requested it to fix some messy conflicts.
DK put some nice docs into the commit introducing driver private
state, but in the git history alone it'll be lost.
Also, since Ville remove the void* usage it's a good opportunity to
give the driver private stuff some tlc on the doc front.
Finally try to explain why the "let's just subclass drm_atomic_state"
approach wasn't the greatest, and annotate all those functions as
deprecated in favour of more standardized driver private states. Also
note where we could/should extend driver private states going forward
(atm neither locking nor synchronization is handled in core/helpers,
which isn't really all that great).
v2: Spelling and phrasing improvements (Alex, DK).
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-5-daniel.vetter@ffwll.ch
PROBE_DEFER also uses system_wq to reprobe drivers, which means when
that again fails, and we try to flush the overall system_wq (to get
all the delayed connectore cleanup work_struct completed), we
deadlock.
Fix this by using just a single cleanup work, so that we can only
flush that one and don't block on anything else. That means a free
list plus locking, a standard pattern.
v2:
- Correctly free connectors only on last ref. Oops (Chris).
- use llist_head/node (Chris).
v3
- Add init_llist_head (Chris).
Fixes: a703c55004 ("drm: safely free connectors from connector_iter")
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+: 613051dac4 ("drm: locking&new iterators for connector_list"
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Thierry Escande <thierry.escande@collabora.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).
This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.
Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.
Changes in v2:
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
create and attach functions. The caller is expected to set
drm_display_info.panel_orientation before calling this, then this will
check for platform specific quirks overriding the panel_orientation and if
the panel_orientation is set after this then it will attach the property.
Changes in v6:
-Use an enum (with kerneldoc) rather then #defines for
DRM_MODE_PANEL_ORIENTATION_*
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-4-hdegoede@redhat.com
We need to pull 66660d4cf2 (drm: add connector info/property for
non-desktop displays [v2]) into drm-misc-next to continue the development
of the display rotation series.
Effectively this also pulls 4.15-r2 into drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Cross-subsystem Changes:
- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)
Core Changes:
The most important changes are:
- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)
Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements. And a bunch of misc improvements, clean ups and style
changes and doc updates
[airlied: drop eld bits from amdgpu_dm]
Driver Changes:
- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)
* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
drm/bridge: tc358767: add copyright lines
MAINTAINERS: change maintainer for Rockchip drm drivers
drm/vblank: Fix vblank timestamp debugs
drm/via: use monotonic time for VIA_WAIT_IRQ
dma-buf: Fix ifnullfree.cocci warnings
drm/printer: Add drm_vprintf()
drm/edid: Allow HDMI infoframe without VIC or S3D
video/hdmi: Allow "empty" HDMI infoframes
dma-buf/fence: Fix lock inversion within dma-fence-array
drm/sti: Handle return value of platform_get_irq_byname
drm/vc4: Add support for NV21 and NV61.
drm/vc4: Use .pixel_order instead of custom .flip_cbcr
drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm/vmwgfx: Try to fix plane clipping
drm/vmwgfx: Use drm_plane_helper_check_state()
drm/vmwgfx: Remove bogus crtc coords vs fb size check
gpu: gma500: remove unneeded DRIVER_LICENSE #define
drm: don't link DP aux i2c adapter to the hardware device node
...
Add drm_mode_config_helper_suspend/resume() which takes care of
atomic modeset suspend/resume for simple use cases.
The suspend state is stored in struct drm_mode_config.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
This adds the infrastructure needed to quirk displays
using edid and to mark them a non-desktop.
A non-desktop display is one which shouldn't normally be included
as a part of a desktop environment.
This is meant to cover head mounted devices like HTC Vive.
v2: Change description from non-standard to non-desktop, add docs
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixup docs
Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.
Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in
commit a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.
v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Updated blob layout (Rob, Daniel, Kristian, xerpi)
v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)
v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)
v4:
Use plane->modifier_count instead of recounting (Daniel)
v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size
Cc: Rob Clark <robdclark@gmail.com>
Cc: Kristian H. Kristensen <hoegsberg@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net
The rules are getting real hard, better to dump my brain into text a
bit. This is by far not complete, but I think I reasonable start at
least.
Some of the older kms structures would need a full doc review anyway
...
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-2-daniel.vetter@ffwll.ch
Allow drivers to return a custom drm_format_info structure for special
fb layouts. We'll use this for the compression control surface in i915.
v2: Fix drm_get_format_info() kernel doc (Laurent)
Don't pass 'dev' to the new hook (Laurent)
v3: s/compresssion/compression/ (Ben)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-4-ville.syrjala@linux.intel.com
