IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This version addresses issues with:
- When CPU 0 hotplug is not possible, try cgroup v2 isolation
without any user input
- Fix turbo mode enable/disable swapped
- Sanitize command line integer and hex arguments
- Add more error messages
- Increase CPU count in one request
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
From kernel version 6.5, CPU 0 hotplug capability is deprecated.
If some SST profile doesn't have CPU 0, then it is no longer possible to
offline CPU 0. This means that user space threads will still run on
CPU 0.
To workaround this issue, use cgroup v2 isolation feature. Whenever there
/sys/devices/system/cpu/cpu0/online file is absent or open fails, isolate
CPU 0 via CPU cgroup v2 isolation. Also add a command line option to
force even if the /sys/devices/system/cpu/cpu0/online is present.
The previous commit "01bcb56f059e ("tools/power/x86/intel-speed-select:
Prevent CPU 0 offline") was just warning about this issue based on the
kernel version 6.5 and above. With this new approach, instead of warning
take action to mitigate the issue.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
With the increase in the CPU count, this count needs to be updated.
Increase max CPU count to 512.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When core-power is getting enabled, if the feaure is not supported,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The command for turbo-mode enable and disable is swapped. Fix that.
Previously turbo-mode enable was actually disabling and disable was
enabling.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
TRL (turbo ratio limit) argument is passed in hex string. Clarify that
in the help.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
If the command takes some integer arguments, make sure the command
contains only digits. Same for Hex arguments. Otherwise return error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
This version addresses issues with:
- CPU count display for power domain != 0
- Support more than 8 sockets
- Error on max CPU count exceeds in one request
- Prevent trying CPU 0 hotplug for kernel version 6.5 or later
- Change mem-frequency display to max-mem-frequency
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The mem-frequency displayed by each profile is not the actual memory
frequency of DIMMs, but the maximum the CPU can support.
Change the mem-frequency field to max-mem-frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Kernel 6.5 version deprecated CPU 0 hotplug. This will cause all
requests to fail to offline CPU 0. Check version number of kernel
and ignore CPU 0 hotplug request with debug aid to use cgroup
isolation feature for CPU 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
There is a limit on number of CPUs in one request. This is set to 256.
Currently tool silently ignores request for count over 256. Give an
error message to indicate this.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
MAX_PACKAGE_COUNT limits the intel-speed-select to systems with 8 sockets or fewer.
On a system with more than 8 sockets intel-speed-select silently ignores everything
beyond the 8th socket, rendering the tool useless for those systems.
Increase MAX_PACKAGE_COUNT to support systems with up to 32 sockets.
Signed-off-by: Frank Ramsay <frank.ramsay@hpe.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fix CPU count display for power domain != 0. In the function
punit_id is always 0, so it never incremented cpu count for power
domain id != 0.
Update punit_id after call to update_punit_cpu_info() to what is
actually received from the kernel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
This version addresses issues with core power configuration for
non CPU dies. Also address issue with JSON formatting of output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When core-power configuration or enabled is modified, this is only done
for compute dies. But the config must also be set to cores with no CPUs.
Without this the configuration is not affective.
On displaying config information, allow display for non compute dies
also.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Update tool and supported API version. This is the first version which
supports newer Xeon platforms with TPMI support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Emerald Rapids doesn't specify TRL (Turbo Ratio Limits) based instruction
types. Instead it specifies 5 TRL levels, which can be anyone of the
instruction types.
Increase TRL levels to 5 for Emerald Rapids. Also change display to show
by level number. Show only non zero level values.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
There are some differences compared to Sapphire Rapids. So, add a separate
API.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
AMX frequency is present in non TPMI platforms also. When platform
supports, the value is non zero. So, display AMX base frequency when
non zero, irrespective of platform API version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
On supported systems, it is possiible to isolate CPUs instead of
CPU online/offline. This is optional and can be specified using
-g option when running as daemon or in combination with -o option
for SST-PP level change.
CPU isolation doesn't isolate IRQs. So IRQs needs to be moved away
from isoolated CPUs. This can be done via IRQ sysfs or irqbalance daemon.
The IRQ balance daemon is also capable to parse thermal HFI messages to
move IRQs away from CPUS, which are supposed be isolated. But this
requires version released after July 2022.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
During perf level change cpuset is allocated but not freed.
Add free_cpu_set() in success and failure path.
Although this is not an issue, as the program will exit after
processing of online/offline, but for completeness add the
free_cpu_set().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Comparing clos_config->clos_max with 255 is broken with TPMI I/F because
of different isst_get_disp_freq_multiplier() used.
Checking for clos_config->clos_max * isst_get_disp_freq_multiplier()
instead.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Some operations applies to cpu-power-domain only. Add check for cpu id
for these functions.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
If the new TDP level requetsted is same as the current TDP level, don't
call into driver to change level.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Non CPU power domains will not have any CPUs. So don't display any CPU
count or enable mask.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
TRL levels with Zero ratio values is meaningless.
Prevent these TRL levels from being displayed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
level 0 name is not shown in some case for backward compatibility reason.
No need to keep this quirk for new api_version.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Non-cpu power domain does not support cpu clos config.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Some power domain may not have CPUs associated, allow displaying
information for these non-cpu power domains.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
amx_p1 and cooling_type are newly introduced for TPMI interface.
Display amx_p1 and cooling_type info for platforms that support them.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Display punit info for platforms with new api_version.
For platforms with old api_version, don't display the punit info to be
backward compatible.
For example:
Intel(R) Speed Select Technology
Executing on CPU model:173[0xad]
package-0
die-0
powerdomain-0
cpu-0
get-config-current_level:0
package-0
die-0
powerdomain-3
cpu--1
get-config-current_level:0
package-0
die-0
powerdomain-4
cpu--1
get-config-current_level:0
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
TPMI (Topology Aware Register and PM Capsule Interface) creates a
flexible, extendable and software-PCIe-driver-enumerable MMIO interface
for PM features.
SST feature is exposed via the TPMI interface on newer Xeon platforms.
Kernel TPMI based SST driver provides a series of new IOCTLs for userspace
to use.
Introduce support for the platforms that do SST control via TPMI interface.
Compared with previous platforms, Newer Xeons also supports multi-punit in a
package/die, including cpu punit and non-cpu punit. These have already
been handled in the generic code.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Get punit core mapping information using format of MSR 0x54. Based
on the API version, decode is done using new format. The new format
also include a power domain ID. TPMI SST information is for each
power domain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
In some cases, the output format may be different with different
api_version because of different capabilities or for backward
capabilities reason.
Introduce api_version() to get the api_version of the platform running.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
clos_min/max in TPMI interface is frequency in MHz, thus clos_min/max
needs to support larger values.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Platform specific code also needs to give debug output.
Introduce is_debug_enabled() for this purpose.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Different api_version suggests different kernel driver used and
different interface is used to communication with the hardware.
Allow setting platform specific callbacks based on api_version.
Currently, all platforms with api_version 1 uses Mbox/MMIO interfaces.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
After the previous cleanup, there is no user of send_mbox_cmd outside of
isst-core-mbox.c.
Thus move send_mbox_cmd to isst-core-mbox.c as internal functions.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to adjust the uncore frequency.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to get SST-CP capability and
current state.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to set per core CLOS setting.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to get per core CLOS setting.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to set CLOS priority setting.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to get CLOS priority setting.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to set CLOS config settings.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to get CLOS config setting.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Allow platform specific implementation to get turbo ratio limits of each
AVX level, for a selected SST-PP level.
No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
