IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Merge series from Wolfram Sang <wsa+renesas@sang-engineering.com>:
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_*() functions causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
obvious and self explaining.
This is part of a tree-wide series. The rest of the patches can be found here
(some parts may still be WIP):
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left
Because these patches are generated, I audit them before sending. This is why I
will send series step by step. Build bot is happy with these patches, though.
No functional changes intended.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Do not open-code snd_soc_substream_to_rtd() when accessing
snd_pcm_substream->private_data. This makes code more consistent with
rest of ASoC and allows in the future to move the field to any other
place or add additional checks in snd_soc_substream_to_rtd().
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset does not change any functionality. It only clarifies the
Copyright information in ASoC/HDAudio contributions, where an "All
rights reserved" notice was mistakenly added in a number of files over
the years, likely due to copy/paste. The Intel template never included
this statement.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The SoundWire BPT support will rely on the HDaudio DMA. This exposes a
circular dependency module dependency which has to be resolved by
splitting common parts used by HDaudio and SoundWire parts, and
'generic' parts used by HDaudio only.
This patchset does not change any functionality, it just moves code
around, exposes symbols that are used in the new module. The code has
been in use for more than one kernel cycle already so it really
shouldn't break any existing platforms.
The main issue with such code moves is that it makes backports or
fixes more complicated. That's the main reason why we held back these
patches until we were reasonably confident on the maturity of MTL and
LNL drivers.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The first patch handles a problematic configuration where the wrong
machine driver/topology is used: when the hardware reports an external
HDaudio codec the direction is to ignore/discard ACPI SoundWire
devices.
The last two patch deal with DMIC format configurations and allow
users to select S16_LE even if the DMIC and internal copiers only
support 24 or 32-bits. The code changes are located in sound/soc/sof/
but in the scope of Intel DAIs.
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-5-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-4-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-3-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-2-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine boards expose input device for use with userspace. Current name
in some cases is incorrect, fix it.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240506121106.3792340-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a warning reported by robot kernel test that 'fw_entry' in function
'tas2781_load_calibration' is used uninitialized with compiler
sh4-linux-gcc (GCC) 13.2.0, an update of copyright and a correction of the
comments.
Fixes: ef3bcde75d ("ASoc: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240505122346.1326-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that most of the code moves are done, we can add a new module and
the required EXPORT_SYMBOL definitions.
No functionality change, just a new module added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_sdw_process_wakeen() is used in hda-loader.c, but defined in
hda.c. This code split will create a circular dependency when hda.c is
moved to a different module. Rather than an invasive code change, this
patch follows the model used for sdw_check_wakeen_irq() with an
abstraction. For now all abstractions point to the same common
routine, which is arguably not great, but this also provides us with a
future-proof way of addressing platform-specific wake processing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CREATE_TRACEPOINTS is supposed to be used once. To avoid modpost
issues when creating modules, let's move the tracepoint creation in a
single object file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid circular dependencies when moving hda.c to a separate module,
we need to move the common code to hda-ipc.c and hda-dsp.c
No functionality change, just code move.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code relies on the 'HDA_COMMON' module and namespace. We
need to start splitting top-level parts from the low-level ones,
otherwise we will not be able to reuse the low-level parts DMA support
for SoundWire/BPT.
In the end the dependencies will be:
+----------------------------------------------+
| |
| v
sof-pci-intel-xxx --> sof-intel-hda ------------> sof-hda-common
| ^
| |
+-> soundwire_intel --> sof_hda_sdw_bpt
This patch adds the initial split between the sof-pci-intel-xxx
modules and the common parts, in a follow-up patch we will further
split the HDA_COMMON parts
Since the PCI modules are not all independent, i.e. the CNL parts are
also used in JSL and TGL, additional Kconfig and namespace modules
were added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid circular dependencies between SOF/Intel and SoundWire/Intel,
we need to split the top-level hda.c from the rest of the code. This
patch first regroups all SoundWire related code in hda.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export this helper so that we can report the DPIB position if the BPT
DMA do not complete - this is very useful to see if the DMA started or
gets stuck somehow with invalid bandwidth configurations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of capture and when the DAI copier have single bit depth supported
on it's input side we should use this format instead of the one in
fe_params.
Regardless of the stream direction for the NHLT blob lookup when the DAI
copier only supports single bit depth on the DAI side we should only look
for a blob which matches with this single configuration.
For DMIC if the DAI copier supports multiple bit depths, try to request
32-bit blob first if the requested bit depth is 16-bit.
If the 32-bit blob is available then look for marching (32-bit) copier
format to make sure that both the blob and copier have correct parameters.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a bitmask parameter to sof_ipc4_update_hw_params() to be able to select
the param to be updated.
This feature can be used when not all params should be updated, for example
if caller only wants to update the format in the params, leaving the
channels and rates untouched.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine driver and topology selection starts with I2S, then
SoundWire and last uses HDaudio as a fallback. That assumes that the
ACPI information is correct but there are of course exceptions to the
rule.
On a Lenovo platform, an external HDaudio codec is detected, but the
ACPI tables expose TWO RT711 jack codecs. This patch skips the
SoundWire selection in case an external HDaudio codec is detected -
which only works with the additional assumption that no one will mix
HDaudio and SoundWire.
Closes: https://github.com/thesofproject/linux/issues/4962
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240502074722.1103986-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP pin configuration varies based on acp version.
ACP PCI driver should read the ACP PIN config value and based on config
value, it has to create a platform device in below two conditions.
1) If ACP PDM configuration is selected from BIOS and ACP PDM controller
exists.
2) If ACP I2S configuration is selected from BIOS.
Other than above scenarios, ACP PCI driver should skip the platform
device creation logic, i.e. ACP PCI driver probe sequence should never
fail if other acp pin configuration is selected. It should skip platform
device creation logic.
check_acp_pdm() function was implemented for ACP6.x platforms to check
ACP PDM configuration. Previously, this code was safe guarded by
FLAG_AMD_LEGACY_ONLY_DMIC flag check.
This implementation breaks audio use cases for Huawei Matebooks which are
based on ACP3.x varaint uses I2S configuration.
In current scenario, check_acp_pdm() function returns -ENODEV value
which results in ACP PCI driver probe failure without creating a platform
device even in case of valid ACP pin configuration.
Implement check_acp_config() as a common function which invokes platform
specific acp pin configuration check functions for ACP3.x, ACP6.0 & ACP6.3
& ACP7.0 variants and checks for ACP PDM controller.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218780
Fixes: 4af565de9f ("ASoC: amd: acp: fix for acp pdm configuration check")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240502140340.4049021-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset fixes 2 problems on TDM which both find a solution
by properly implementing the .trigger() callback for the TDM backend.
ATM, enabling the TDM formatters is done by the .prepare() callback
because handling the formatter is slow due to necessary calls to CCF.
The first problem affects the TDMIN. Because .prepare() is called on DPCM
backend first, the formatter are started before the FIFOs and this may
cause a random channel shifts if the TDMIN use multiple lanes with more
than 2 slots per lanes. Using trigger() allows to set the FE/BE order,
solving the problem.
There has already been an attempt to fix this 3y ago [1] and reverted [2]
It triggered a 'sleep in irq' error on the period IRQ. The solution is
to just use the bottom half of threaded IRQ. This is patch #1. Patch #2
and #3 remain mostly the same as 3y ago.
For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and
the TDMOUT just starves. When it does, it will actually repeat the last
sample continuously. Depending on the platform, if there is no high-pass
filter on the analog path, this may translate to a constant position of
the speaker membrane. There is no audible glitch but it may damage the
speaker coil.
Properly stopping the TDMOUT in pause solves the problem. There is
behaviour change associated with that fix. Clocks used to be continuous
on pause because of the problem above. They will now be gated on pause by
default, as they should. The last change introduce the proper support for
continuous clocks, if needed.
[1]: https://lore.kernel.org/linux-amlogic/20211020114217.133153-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20220421155725.2589089-1-narmstrong@baylibre.com
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Last batch of cleanups from Brent Lu, with Chromebooks now supported
with fewer modular machine drivers.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of changes that aims to improve readability of cohesiveness of the
pcm code for the avs-driver.
Start off with a change that synchronizes DAI open/close - DAIs are
started up in ascending order yet their shutdown does not follow the
scheme - it is done in the ascending order too, rather than desceding
one. This patch is a dependency for the next one in line.
To align the HDAudio DAI startup/shutdown with the non-HDAudio
equivalents, relocate the code from component to DAI. The reason above
is a dependency stems from codec driver requirements - HDAudio code
found in sound/pci/hda/ expects substream->runtime->private_data to
point to a valid stream (HOST) pointer.
With the hard part done, the follow up changes update the existing code
to reduce it is complexity - removal of duplicates, renaming of
ambiguous functions and adding new fields to DAI-data object so that the
number of local variables and casts is reduced.
Merge series from Krzysztof Kozlowski <krzk@kernel.org>:
The core code does not modify the 'struct snd_sof_dsp_ops' passed via
pointer in various places, so this can be made pointer to const in few
places. This in turn allows few drivers to have the local (usually
static) 'struct snd_sof_dsp_ops' as const which increased code safety,
as it is now part of rodata.
Not all drivers can be made safer that way. Intel and AMD rely on
customizing that 'struct snd_sof_dsp_ops' before passing to SOF, so they
won't benefit. They don't lose anything., either.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Fixes when fw_lib_prefix is not set, updated error messages, improved
dmesg logs to SoundWire configurations not supported by ACPI
tables/topology and support for IEC61937 passthrough.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset corrects a couple of mistakes corrected, improves
snd_soc_card allocation. The new functionality is mostly for
SoundWire platforms, with new SKUs for Dell and Acer, and support for
the Cirrus Logic bridge/sidecar amplifier topology.
The AllWinner H6 and later SoCs that sport a DMIC block contain a set of registers to control
the gain (left + right) of each of the four supported channels.
Add ASoC controls for changing each of the stereo channel gains using alsamixer and alike
Signed-off-by: Joao Schim <joao@schimsalabim.eu>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240429194920.1596257-1-joao@schimsalabim.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-14-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-13-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-12-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-11-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-10-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-9-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-8-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-7-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-6-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-5-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the pointer to 'struct snd_sof_dsp_ops' to annotate that
functioon does not modify pointed data.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-3-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the pointer to 'struct snd_sof_dsp_ops' to annotate that
functioon does not modify pointed data.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-2-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the pointer to 'struct snd_sof_dsp_ops' to annotate that
functioon does not modify pointed data.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-1-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If a PCM is set to use ChainDMA then add it to the card->components string
after a marker of iec61937-pcm:, for example on current HDA platforms where
HDMI is set to use ChainDMA:
iec61937-pcm:5,4,3 (the order of the PCM ids can differ)
UCM is expected to parse and use this property to allow applications to
use bytestream passthrough in a standard way.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the SoundWire support issues come from bad ACPI information,
or configuration reported by ACPI that are not supported by the SOF
driver/topology. The users see a "No SoundWire machine driver found"
message without any details, and the fallback to HDaudio w/ HDMI is
used.
We can reduce our support load with a clear dev_info() log that will
give us a clear hint on the mismatch and why a machine driver/topology
were not found.
Example log on a MTL device:
[ 13.158599] sof-audio-pci-intel-mtl 0000:00:1f.3: No SoundWire machine driver found for the ACPI-reported configuration:
[ 13.158603] sof-audio-pci-intel-mtl 0000:00:1f.3: link 0 mfg_id 0x025d part_id 0x0713 version 0x3
[ 13.158606] sof-audio-pci-intel-mtl 0000:00:1f.3: link 1 mfg_id 0x025d part_id 0x1316 version 0x3
[ 13.158608] sof-audio-pci-intel-mtl 0000:00:1f.3: link 2 mfg_id 0x025d part_id 0x1316 version 0x3
In parallel, we will also provide an update to `alsa-info` to log all
SoundWire peripherals found in ACPI tables.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify code to return when no links are enabled. No functional
change, just code cleanup before updates.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In sof_widget_ready() function, the shift field of
struct snd_soc_tplg_dapm_widget is incorrectly used to print
widget id in dev_err(scomp->dev, "error: failed to add widget id %d ..",
this patch removes the useless tw->shift from the error output.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware libraries are not supported by IPC3, the fw_lib_path is not
a valid parameter and it is always NULL.
Do not create the debugfs file for IPC3 at all as it is not applicable.
With IPC4 some vendors/platforms might not support loadable libraries and
the fw_lib_prefix is left to NULL to indicate this.
Handle such case with allocating "Not supported" string.
Reviewed-by: Marc Herbert <marc.herbert@intel.com>
Fixes: 17f4041244 ("ASoC: SOF: debug: show firmware/topology prefix/names")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l43 has both a SPI master and an I2S interface, these can
be used to populate 2 cs35l56 amplifiers as sidecar devices along
side the cs42l43. Giving a system that looks like:
+-----+ +---------+ <- SPI -> +---------+
| CPU | <- SDW -> | CS42L43 | | CS35L56 |
+-----+ +---------+ <- I2S -> +---------+
Add a quirk to specify this feature is present and use it to add
codec to codec DAI link to connect the amplifiers into the sound
card, add appropriate widgets, and setup clocking on the
amplifiers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for systems that have additional non-SoundWire devices
(sidecars) connected to one of the SoundWire devices in the
system. This is done through the addition of two callbacks, one used
at endpoint parsing time that will return the number of devices and
DAI links to be added, and another called later as the DAI links are
created that will populate those devices into the appropriate arrays.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the population of the codec_conf array from endpoint parsing
time to link creation time. This is slightly cleaner as the
population is done whilst the DAI links are also being populated,
putting all population together. However, primarily this facilitates
allowing additional non-SoundWire devices to be easily added into
the array in future feature additions.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two independent GitHub PRs let to the addition of one quirk after it
was removed..
Fixes: b10cb955c6 ("ASoC: Intel: sof_sdw: add quirk for Dell SKU 0C0F")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM parse amp with Regex " cfg-amp:([0-9]+)". The "ASoC: Intel: sof_sdw:
remove FOUR_SPEAKER quirks" patch removed "cfg-spk:%d " from components
which removed the necessary space as well and cause UCM can't parse the
amp number properly.
Fixes: 744866d28f ("ASoC: Intel: sof_sdw: remove FOUR_SPEAKER quirks")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM can load a board-specific file based on the card long_name. Remove
the constant "Intel Soundwire SOF" long_name so that the ASoC core can
set the long_name based on DMI information.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The static card_sof_sdw struct is modified during runtime and in case the
module is not removed, but the card is, then the next time the card is
created the card_sof_sdw will contain information from the previous card
which might lead to hard to debug issues, side effects.
Move the snd_soc_card into mc_private and use that to make sure that the
card is initialized correctly.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for corresponding codecs on LNL hardware
configuration:
SDW0: RT714 DMIC
SDW1: RT1318 Left Speaker
SDW2: RT1318 Right Speaker
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKU 0C64 relies on rt713 (jack codec) on link0, rt1318 (single
amplifier) on link1 and rt1713 (dmic) on link3.
SKU 0CC6 relies on rt713 (jack codec) on link0, rt1318 (two
amplifiers) on link 1-2 and rt1713 (dmic) on link3.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a global char array, allocate the string with
devm_kasprintf if needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The static hda_soc_card might be modified during runtime which might cause
issues on next time when the card is created.
For example if the dmic_num was set with module parameter then removed for
the next module loading then the card's components will still going to
point to the previous boot's cfg-dmics:X string.
There might be other places where devm allocated memory have been freed but
the hda_soc_card still pointing to the now unallocated memory (the memory
is freed when the platform device is removed).
Fix this issue by moving the snd_soc_card into skl_hda_private and use it
for the card registration to ensure that it is correctly initialized every
time.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While the HDAudio codec driver expectations must be met - store valid
pointer to HDAudio LINK stream in substream->runtime->private_data - the
code is more readable and easier to maintain if dma_data stores pointers
to both HOST and LINK stream.
DAI BE operations can refer to the LINK stream with data->link_stream,
similarly to how DAI FE operations access the HOST stream with
data->host_stream.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop unused arguments in the avs_dai_prepare() function. With the
function updated, it matches its template in snd_soc_dai_ops and can be
referenced throughout the pcm.c file without need of any wrappers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Half of the arguments in avs_dai_startup() are unused and can be
dropped. With the function updated, it matches its template in
snd_soc_dai_ops and can be referenced throughout the pcm.c file without
need of any wrappers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move avs_dai_nonhda_be_shutdown() to avs_dai_shutdown() as the function
is common for all transfer types, not just non-HDAudio ones. Use it
to simplify avs_dai_fe_shutdown().
While at it, fix explicit kfree(data) and use the destructor instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI's startup()/shutdown() shall deal with allocation and freeing of
resources needed to facilitate streaming over it. Currently for HDAudio
BE DAIs some of that task is done in component->open()/close(). Relocate
the relevant pieces to address that.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During startup snd_soc_dai_startup() is launched in ascending order and
the exact same thing is done during shutdown procedure. Reverse the
order in the latter so that it is symmetric to the former.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For rt5682s codec, we could use bclk as PLL source when the frequency
is 3.072MHz but no 2.4MHz. Update the code to select correct pll_id
and clk_id for 3.072MHz bclk.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A different bclk frequency 3.072MHz was introduced to tgl platform and
is used in mtl topologies. Use SOF API to get frequency from topology
instead of hardcoding.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable 'pll_id' is needed only when we use snd_soc_dai_set_pll()
to setup PLL. Move the code segment to improve some readability.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move default BYT/CHT quirk to driver_data of sof_rt5682 board. This
fixes a problem that DMI quirk of Minnowboard board got overwritten in
probe function since it's a BYT board.
Fixes: c68e07970e ("ASoC: intel: sof_rt5682: Add quirk for number of HDMI DAI's")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config icl_rt5682_def to rt5682 machine driver for all
icl boards using default SSP port allocation (headphone codec on SSP0).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need this quirk flag since 'is_legacy_cpu' will be true if
this is a BYT/CHT board.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a variable mclk_en to sof_rt5682_private structure to reduce
global variable access. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For glk boards, MAX98357A speaker amplifier is supported by machine
driver glk_rt5682_mx98357a with sound card name glkrt5682max. Use same
name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config glk_rt5682_def to rt5682 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove glk platform support and use sof_da7219 machine driver instead
for existing glk boards with MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For glk boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name glkda7219max. Use
same name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config glk_da7219_def to da7219 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove cml platform support and use sof_da7219 machine driver instead
for existing cml boards with MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cmlda7219max. Use
same name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Maxim MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove MAX98390 support and use sof_da7219 machine driver instead for
existing cml boards with MAX98390 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, MAX98390 speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cml_max98390_da7219.
Use same name for backward compatibility with existing devices on
market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config cml_da7219_def to da7219 machine driver for all
cml boards using default SSP port allocation (headphone codec on SSP0,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Maxim MAX98390 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for 2xMAX98390 speaker amplifier running in I2S mode for
existing cml boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two machine drivers sof_rt5682 and sof_nau8825 always register two
speaker widgets 'Left Spk' and 'Right Spk' regardless the actual
number of speakers. Move the widget registration to speaker common
modules to avoid useless speaker widgets for 1 or 4 speaker boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152939.38471-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
Fixes: d60e4f1e4b ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, what is done is clear.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.
The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.
Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.
This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.
Use the bottom half of a threaded IRQ to do so.
Fixes: 6dc4fa179f ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-5-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
This code returns -EINVAL if "i" is out of bounds a few lines earlier.
Delete this unnecessary check and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1ee32bfb-6f6c-4b61-887b-6f655abbfc47@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Static checkers complain that the silicon_uid variable passed by
pointer to cs35l56_read_silicon_uid() could later be used
uninitialised when calling cs_amp_get_efi_calibration_data().
cs35l56_read_silicon_uid() must have succeeded to call
cs_amp_get_efi_calibration_data() and that would have populated the
variable.
However, initialise the value so we are not haunted by it forevermore.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: e1830f66f6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shenghao Ding <shenghao-ding@ti.com>:
mixer-test report:
root@am335x-evm:/bin# mixer-test
TAP version 13
# Card 0 - TI BeagleBone Black (TI BeagleBone Black)
1..455
ok 1 get_value.0.64
# 0.64 PCMD3180 i2c2 Profile id
ok 2 name.0.64
ok 3 write_default.0.64
ok 4 write_valid.0.64
ok 5 write_invalid.0.64
ok 6 event_missing.0.64
ok 7 event_spurious.0.64
ok 8 get_value.0.63
# 0.63 PCMD3180 i2c2 Dev3 Ch8 Digi Volume
ok 9 name.0.63
ok 10 write_default.0.63
ok 11 write_valid.0.63
ok 12 write_invalid.0.63
ok 13 event_missing.0.63
ok 14 event_spurious.0.63
ok 15 get_value.0.62
# 0.62 PCMD3180 i2c2 Dev3 Ch7 Digi Volume
ok 16 name.0.62
ok 17 write_default.0.62
ok 18 write_valid.0.62
ok 19 write_invalid.0.62
ok 20 event_missing.0.62
ok 21 event_spurious.0.62
ok 22 get_value.0.61
# 0.61 PCMD3180 i2c2 Dev3 Ch6 Digi Volume
ok 23 name.0.61
ok 24 write_default.0.61
ok 25 write_valid.0.61
ok 26 write_invalid.0.61
ok 27 event_missing.0.61
ok 28 event_spurious.0.61
ok 29 get_value.0.60
# 0.60 PCMD3180 i2c2 Dev3 Ch5 Digi Volume
ok 30 name.0.60
ok 31 write_default.0.60
ok 32 write_valid.0.60
ok 33 write_invalid.0.60
ok 34 event_missing.0.60
ok 35 event_spurious.0.60
ok 36 get_value.0.59
# 0.59 PCMD3180 i2c2 Dev3 Ch4 Digi Volume
ok 37 name.0.59
ok 38 write_default.0.59
ok 39 write_valid.0.59
ok 40 write_invalid.0.59
ok 41 event_missing.0.59
ok 42 event_spurious.0.59
ok 43 get_value.0.58
# 0.58 PCMD3180 i2c2 Dev3 Ch3 Digi Volume
ok 44 name.0.58
ok 45 write_default.0.58
ok 46 write_valid.0.58
ok 47 write_invalid.0.58
ok 48 event_missing.0.58
ok 49 event_spurious.0.58
ok 50 get_value.0.57
# 0.57 PCMD3180 i2c2 Dev3 Ch2 Digi Volume
ok 51 name.0.57
ok 52 write_default.0.57
ok 53 write_valid.0.57
ok 54 write_invalid.0.57
ok 55 event_missing.0.57
ok 56 event_spurious.0.57
ok 57 get_value.0.56
# 0.56 PCMD3180 i2c2 Dev3 Ch1 Digi Volume
ok 58 name.0.56
ok 59 write_default.0.56
ok 60 write_valid.0.56
ok 61 write_invalid.0.56
ok 62 event_missing.0.56
ok 63 event_spurious.0.56
ok 64 get_value.0.55
# 0.55 PCMD3180 i2c2 Dev3 Ch8 Fine Volume
ok 65 name.0.55
ok 66 write_default.0.55
ok 67 write_valid.0.55
ok 68 write_invalid.0.55
ok 69 event_missing.0.55
ok 70 event_spurious.0.55
ok 71 get_value.0.54
# 0.54 PCMD3180 i2c2 Dev3 Ch7 Fine Volume
ok 72 name.0.54
ok 73 write_default.0.54
ok 74 write_valid.0.54
ok 75 write_invalid.0.54
ok 76 event_missing.0.54
ok 77 event_spurious.0.54
ok 78 get_value.0.53
# 0.53 PCMD3180 i2c2 Dev3 Ch6 Fine Volume
ok 79 name.0.53
ok 80 write_default.0.53
ok 81 write_valid.0.53
ok 82 write_invalid.0.53
ok 83 event_missing.0.53
ok 84 event_spurious.0.53
ok 85 get_value.0.52
# 0.52 PCMD3180 i2c2 Dev3 Ch5 Fine Volume
ok 86 name.0.52
ok 87 write_default.0.52
ok 88 write_valid.0.52
ok 89 write_invalid.0.52
ok 90 event_missing.0.52
ok 91 event_spurious.0.52
ok 92 get_value.0.51
# 0.51 PCMD3180 i2c2 Dev3 Ch4 Fine Volume
ok 93 name.0.51
ok 94 write_default.0.51
ok 95 write_valid.0.51
ok 96 write_invalid.0.51
ok 97 event_missing.0.51
ok 98 event_spurious.0.51
ok 99 get_value.0.50
# 0.50 PCMD3180 i2c2 Dev3 Ch3 Fine Volume
ok 100 name.0.50
ok 101 write_default.0.50
ok 102 write_valid.0.50
ok 103 write_invalid.0.50
ok 104 event_missing.0.50
ok 105 event_spurious.0.50
ok 106 get_value.0.49
# 0.49 PCMD3180 i2c2 Dev3 Ch2 Fine Volume
ok 107 name.0.49
ok 108 write_default.0.49
ok 109 write_valid.0.49
ok 110 write_invalid.0.49
ok 111 event_missing.0.49
ok 112 event_spurious.0.49
ok 113 get_value.0.48
# 0.48 PCMD3180 i2c2 Dev3 Ch1 Fine Volume
ok 114 name.0.48
ok 115 write_default.0.48
ok 116 write_valid.0.48
ok 117 write_invalid.0.48
ok 118 event_missing.0.48
ok 119 event_spurious.0.48
ok 120 get_value.0.47
# 0.47 PCMD3180 i2c2 Dev2 Ch8 Digi Volume
ok 121 name.0.47
ok 122 write_default.0.47
ok 123 write_valid.0.47
ok 124 write_invalid.0.47
ok 125 event_missing.0.47
ok 126 event_spurious.0.47
ok 127 get_value.0.46
# 0.46 PCMD3180 i2c2 Dev2 Ch7 Digi Volume
ok 128 name.0.46
ok 129 write_default.0.46
ok 130 write_valid.0.46
ok 131 write_invalid.0.46
ok 132 event_missing.0.46
ok 133 event_spurious.0.46
ok 134 get_value.0.45
# 0.45 PCMD3180 i2c2 Dev2 Ch6 Digi Volume
ok 135 name.0.45
ok 136 write_default.0.45
ok 137 write_valid.0.45
ok 138 write_invalid.0.45
ok 139 event_missing.0.45
ok 140 event_spurious.0.45
ok 141 get_value.0.44
# 0.44 PCMD3180 i2c2 Dev2 Ch5 Digi Volume
ok 142 name.0.44
ok 143 write_default.0.44
ok 144 write_valid.0.44
ok 145 write_invalid.0.44
ok 146 event_missing.0.44
ok 147 event_spurious.0.44
ok 148 get_value.0.43
# 0.43 PCMD3180 i2c2 Dev2 Ch4 Digi Volume
ok 149 name.0.43
ok 150 write_default.0.43
ok 151 write_valid.0.43
ok 152 write_invalid.0.43
ok 153 event_missing.0.43
ok 154 event_spurious.0.43
ok 155 get_value.0.42
# 0.42 PCMD3180 i2c2 Dev2 Ch3 Digi Volume
ok 156 name.0.42
ok 157 write_default.0.42
ok 158 write_valid.0.42
ok 159 write_invalid.0.42
ok 160 event_missing.0.42
ok 161 event_spurious.0.42
ok 162 get_value.0.41
# 0.41 PCMD3180 i2c2 Dev2 Ch2 Digi Volume
ok 163 name.0.41
ok 164 write_default.0.41
ok 165 write_valid.0.41
ok 166 write_invalid.0.41
ok 167 event_missing.0.41
ok 168 event_spurious.0.41
ok 169 get_value.0.40
# 0.40 PCMD3180 i2c2 Dev2 Ch1 Digi Volume
ok 170 name.0.40
ok 171 write_default.0.40
ok 172 write_valid.0.40
ok 173 write_invalid.0.40
ok 174 event_missing.0.40
ok 175 event_spurious.0.40
ok 176 get_value.0.39
# 0.39 PCMD3180 i2c2 Dev2 Ch8 Fine Volume
ok 177 name.0.39
ok 178 write_default.0.39
ok 179 write_valid.0.39
ok 180 write_invalid.0.39
ok 181 event_missing.0.39
ok 182 event_spurious.0.39
ok 183 get_value.0.38
# 0.38 PCMD3180 i2c2 Dev2 Ch7 Fine Volume
ok 184 name.0.38
ok 185 write_default.0.38
ok 186 write_valid.0.38
ok 187 write_invalid.0.38
ok 188 event_missing.0.38
ok 189 event_spurious.0.38
ok 190 get_value.0.37
# 0.37 PCMD3180 i2c2 Dev2 Ch6 Fine Volume
ok 191 name.0.37
ok 192 write_default.0.37
ok 193 write_valid.0.37
ok 194 write_invalid.0.37
ok 195 event_missing.0.37
ok 196 event_spurious.0.37
ok 197 get_value.0.36
# 0.36 PCMD3180 i2c2 Dev2 Ch5 Fine Volume
ok 198 name.0.36
ok 199 write_default.0.36
ok 200 write_valid.0.36
ok 201 write_invalid.0.36
ok 202 event_missing.0.36
ok 203 event_spurious.0.36
ok 204 get_value.0.35
# 0.35 PCMD3180 i2c2 Dev2 Ch4 Fine Volume
ok 205 name.0.35
ok 206 write_default.0.35
ok 207 write_valid.0.35
ok 208 write_invalid.0.35
ok 209 event_missing.0.35
ok 210 event_spurious.0.35
ok 211 get_value.0.34
# 0.34 PCMD3180 i2c2 Dev2 Ch3 Fine Volume
ok 212 name.0.34
ok 213 write_default.0.34
ok 214 write_valid.0.34
ok 215 write_invalid.0.34
ok 216 event_missing.0.34
ok 217 event_spurious.0.34
ok 218 get_value.0.33
# 0.33 PCMD3180 i2c2 Dev2 Ch2 Fine Volume
ok 219 name.0.33
ok 220 write_default.0.33
ok 221 write_valid.0.33
ok 222 write_invalid.0.33
ok 223 event_missing.0.33
ok 224 event_spurious.0.33
ok 225 get_value.0.32
# 0.32 PCMD3180 i2c2 Dev2 Ch1 Fine Volume
ok 226 name.0.32
ok 227 write_default.0.32
ok 228 write_valid.0.32
ok 229 write_invalid.0.32
ok 230 event_missing.0.32
ok 231 event_spurious.0.32
ok 232 get_value.0.31
# 0.31 PCMD3180 i2c2 Dev1 Ch8 Digi Volume
ok 233 name.0.31
ok 234 write_default.0.31
ok 235 write_valid.0.31
ok 236 write_invalid.0.31
ok 237 event_missing.0.31
ok 238 event_spurious.0.31
ok 239 get_value.0.30
# 0.30 PCMD3180 i2c2 Dev1 Ch7 Digi Volume
ok 240 name.0.30
ok 241 write_default.0.30
ok 242 write_valid.0.30
ok 243 write_invalid.0.30
ok 244 event_missing.0.30
ok 245 event_spurious.0.30
ok 246 get_value.0.29
# 0.29 PCMD3180 i2c2 Dev1 Ch6 Digi Volume
ok 247 name.0.29
ok 248 write_default.0.29
ok 249 write_valid.0.29
ok 250 write_invalid.0.29
ok 251 event_missing.0.29
ok 252 event_spurious.0.29
ok 253 get_value.0.28
# 0.28 PCMD3180 i2c2 Dev1 Ch5 Digi Volume
ok 254 name.0.28
ok 255 write_default.0.28
ok 256 write_valid.0.28
ok 257 write_invalid.0.28
ok 258 event_missing.0.28
ok 259 event_spurious.0.28
ok 260 get_value.0.27
# 0.27 PCMD3180 i2c2 Dev1 Ch4 Digi Volume
ok 261 name.0.27
ok 262 write_default.0.27
ok 263 write_valid.0.27
ok 264 write_invalid.0.27
ok 265 event_missing.0.27
ok 266 event_spurious.0.27
ok 267 get_value.0.26
# 0.26 PCMD3180 i2c2 Dev1 Ch3 Digi Volume
ok 268 name.0.26
ok 269 write_default.0.26
ok 270 write_valid.0.26
ok 271 write_invalid.0.26
ok 272 event_missing.0.26
ok 273 event_spurious.0.26
ok 274 get_value.0.25
# 0.25 PCMD3180 i2c2 Dev1 Ch2 Digi Volume
ok 275 name.0.25
ok 276 write_default.0.25
ok 277 write_valid.0.25
ok 278 write_invalid.0.25
ok 279 event_missing.0.25
ok 280 event_spurious.0.25
ok 281 get_value.0.24
# 0.24 PCMD3180 i2c2 Dev1 Ch1 Digi Volume
ok 282 name.0.24
ok 283 write_default.0.24
ok 284 write_valid.0.24
ok 285 write_invalid.0.24
ok 286 event_missing.0.24
ok 287 event_spurious.0.24
ok 288 get_value.0.23
# 0.23 PCMD3180 i2c2 Dev1 Ch8 Fine Volume
ok 289 name.0.23
ok 290 write_default.0.23
ok 291 write_valid.0.23
ok 292 write_invalid.0.23
ok 293 event_missing.0.23
ok 294 event_spurious.0.23
ok 295 get_value.0.22
# 0.22 PCMD3180 i2c2 Dev1 Ch7 Fine Volume
ok 296 name.0.22
ok 297 write_default.0.22
ok 298 write_valid.0.22
ok 299 write_invalid.0.22
ok 300 event_missing.0.22
ok 301 event_spurious.0.22
ok 302 get_value.0.21
# 0.21 PCMD3180 i2c2 Dev1 Ch6 Fine Volume
ok 303 name.0.21
ok 304 write_default.0.21
ok 305 write_valid.0.21
ok 306 write_invalid.0.21
ok 307 event_missing.0.21
ok 308 event_spurious.0.21
ok 309 get_value.0.20
# 0.20 PCMD3180 i2c2 Dev1 Ch5 Fine Volume
ok 310 name.0.20
ok 311 write_default.0.20
ok 312 write_valid.0.20
ok 313 write_invalid.0.20
ok 314 event_missing.0.20
ok 315 event_spurious.0.20
ok 316 get_value.0.19
# 0.19 PCMD3180 i2c2 Dev1 Ch4 Fine Volume
ok 317 name.0.19
ok 318 write_default.0.19
ok 319 write_valid.0.19
ok 320 write_invalid.0.19
ok 321 event_missing.0.19
ok 322 event_spurious.0.19
ok 323 get_value.0.18
# 0.18 PCMD3180 i2c2 Dev1 Ch3 Fine Volume
ok 324 name.0.18
ok 325 write_default.0.18
ok 326 write_valid.0.18
ok 327 write_invalid.0.18
ok 328 event_missing.0.18
ok 329 event_spurious.0.18
ok 330 get_value.0.17
# 0.17 PCMD3180 i2c2 Dev1 Ch2 Fine Volume
ok 331 name.0.17
ok 332 write_default.0.17
ok 333 write_valid.0.17
ok 334 write_invalid.0.17
ok 335 event_missing.0.17
ok 336 event_spurious.0.17
ok 337 get_value.0.16
# 0.16 PCMD3180 i2c2 Dev1 Ch1 Fine Volume
ok 338 name.0.16
ok 339 write_default.0.16
ok 340 write_valid.0.16
ok 341 write_invalid.0.16
ok 342 event_missing.0.16
ok 343 event_spurious.0.16
ok 344 get_value.0.15
# 0.15 PCMD3180 i2c2 Dev0 Ch8 Digi Volume
ok 345 name.0.15
ok 346 write_default.0.15
ok 347 write_valid.0.15
ok 348 write_invalid.0.15
ok 349 event_missing.0.15
ok 350 event_spurious.0.15
ok 351 get_value.0.14
# 0.14 PCMD3180 i2c2 Dev0 Ch7 Digi Volume
ok 352 name.0.14
ok 353 write_default.0.14
ok 354 write_valid.0.14
ok 355 write_invalid.0.14
ok 356 event_missing.0.14
ok 357 event_spurious.0.14
ok 358 get_value.0.13
# 0.13 PCMD3180 i2c2 Dev0 Ch6 Digi Volume
ok 359 name.0.13
ok 360 write_default.0.13
ok 361 write_valid.0.13
ok 362 write_invalid.0.13
ok 363 event_missing.0.13
ok 364 event_spurious.0.13
ok 365 get_value.0.12
# 0.12 PCMD3180 i2c2 Dev0 Ch5 Digi Volume
ok 366 name.0.12
ok 367 write_default.0.12
ok 368 write_valid.0.12
ok 369 write_invalid.0.12
ok 370 event_missing.0.12
ok 371 event_spurious.0.12
ok 372 get_value.0.11
# 0.11 PCMD3180 i2c2 Dev0 Ch4 Digi Volume
ok 373 name.0.11
ok 374 write_default.0.11
ok 375 write_valid.0.11
ok 376 write_invalid.0.11
ok 377 event_missing.0.11
ok 378 event_spurious.0.11
ok 379 get_value.0.10
# 0.10 PCMD3180 i2c2 Dev0 Ch3 Digi Volume
ok 380 name.0.10
ok 381 write_default.0.10
ok 382 write_valid.0.10
ok 383 write_invalid.0.10
ok 384 event_missing.0.10
ok 385 event_spurious.0.10
ok 386 get_value.0.9
# 0.9 PCMD3180 i2c2 Dev0 Ch2 Digi Volume
ok 387 name.0.9
ok 388 write_default.0.9
ok 389 write_valid.0.9
ok 390 write_invalid.0.9
ok 391 event_missing.0.9
ok 392 event_spurious.0.9
ok 393 get_value.0.8
# 0.8 PCMD3180 i2c2 Dev0 Ch1 Digi Volume
ok 394 name.0.8
ok 395 write_default.0.8
ok 396 write_valid.0.8
ok 397 write_invalid.0.8
ok 398 event_missing.0.8
ok 399 event_spurious.0.8
ok 400 get_value.0.7
# 0.7 PCMD3180 i2c2 Dev0 Ch8 Fine Volume
ok 401 name.0.7
ok 402 write_default.0.7
ok 403 write_valid.0.7
ok 404 write_invalid.0.7
ok 405 event_missing.0.7
ok 406 event_spurious.0.7
ok 407 get_value.0.6
# 0.6 PCMD3180 i2c2 Dev0 Ch7 Fine Volume
ok 408 name.0.6
ok 409 write_default.0.6
ok 410 write_valid.0.6
ok 411 write_invalid.0.6
ok 412 event_missing.0.6
ok 413 event_spurious.0.6
ok 414 get_value.0.5
# 0.5 PCMD3180 i2c2 Dev0 Ch6 Fine Volume
ok 415 name.0.5
ok 416 write_default.0.5
ok 417 write_valid.0.5
ok 418 write_invalid.0.5
ok 419 event_missing.0.5
ok 420 event_spurious.0.5
ok 421 get_value.0.4
# 0.4 PCMD3180 i2c2 Dev0 Ch5 Fine Volume
ok 422 name.0.4
ok 423 write_default.0.4
ok 424 write_valid.0.4
ok 425 write_invalid.0.4
ok 426 event_missing.0.4
ok 427 event_spurious.0.4
ok 428 get_value.0.3
# 0.3 PCMD3180 i2c2 Dev0 Ch4 Fine Volume
ok 429 name.0.3
ok 430 write_default.0.3
ok 431 write_valid.0.3
ok 432 write_invalid.0.3
ok 433 event_missing.0.3
ok 434 event_spurious.0.3
ok 435 get_value.0.2
# 0.2 PCMD3180 i2c2 Dev0 Ch3 Fine Volume
ok 436 name.0.2
ok 437 write_default.0.2
ok 438 write_valid.0.2
ok 439 write_invalid.0.2
ok 440 event_missing.0.2
ok 441 event_spurious.0.2
ok 442 get_value.0.1
# 0.1 PCMD3180 i2c2 Dev0 Ch2 Fine Volume
ok 443 name.0.1
ok 444 write_default.0.1
ok 445 write_valid.0.1
ok 446 write_invalid.0.1
ok 447 event_missing.0.1
ok 448 event_spurious.0.1
ok 449 get_value.0.0
# 0.0 PCMD3180 i2c2 Dev0 Ch1 Fine Volume
ok 450 name.0.0
ok 451 write_default.0.0
ok 452 write_valid.0.0
ok 453 write_invalid.0.0
ok 454 event_missing.0.0
ok 455 event_spurious.0.0
# Totals: pass:455 fail:0 xfail:0 xpass:0 skip:0 error:0
Merge series from Seven Lee <wtli@nuvoton.com>:
Change the original fixed delay to the assignment from the property. It
will make it more flexible to different platforms to avoid pop noise at
the beginning of recording.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The change is based on rafael/acpi-nhlt [1] immutable branch which
Rafael kindly prepared for me. Without the topmost changes to ACPI/NHLT,
the patches present will fail to compile.
Recent changes for the ACPI tree [2] refactored interfaces of the NHLT
table. Currently we have two implementations - one found in acpi
subsystem (unused) and one in sound/hda/. As NHLT is part of ACPI, idea
is to make the former useful and then switch all users of existing
sound/hda/intel-nhlt.c to this new interface over time and remove the
duplicate afterward.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/?h=acpi-nhlt
[2]: https://lore.kernel.org/linux-acpi/20240319083018.3159716-1-cezary.rojewski@intel.com/
Now that NHLT support in ACPI framework was introduced, migrate avs
driver to new API.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084307.2718881-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make the widget debugfs files more informative, add a line showing the
widget type string.
Keeping backward compatibility is nice to have being debugfs, and ease of
parsing by both humans and software is also good. To maximize both with a
reasonable effort add a new line without thouching the already complex
format of the first line. The syntax is meant to be a key/value pair.
The existing vizdapm tool continues working after this change, ignoring the
new line.
The new format is:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
widget-type adc
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-2-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
debugfs entries for DAPM widgets have the following form:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture"
in "static" "Left PGA"
Lines with the "in" and "out" prefixes describe routes from/to other
widgets presenting the path name and the connected widget name.
This is ambiguous in case of cards having multiple widgets with the same
name in different components. For example the STM32MP157A-DK1 board
(arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi) has a "Capture" widget in both
the "cs42l51.0-004a" and the "hdmi-audio-codec.1.auto" components.
Avoid the ambiguity by adding the component name to the "in" and "out"
lines. Add the new field at the end to minimize backward compatibility
issues. The existing vizdapm tool continues working after this change.
The output becomes:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-1-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from the property.
It will make it more flexible to different platforms to avoid pop
noise at the beginning of recording.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20240415070649.3496487-3-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
WSA881x codecs do not retain the state while clock is stopped, so mark
this with clk_stop_mode1 flag.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240419140012.91384-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Most IRQ-related code is duplicated in the driver. Switch to the new
implementation and remove unused members.
While the change is non-trivial, from functional perspective status quo
is achieved.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084857.2719593-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code can be both improved and simplified. To make this
change easier to manage, first add new implementation and then remove
deadcode in a separate patch.
Simplification achieved with:
- reduce the amount of resources requested by the driver i.e.: IPC and
CLDMA request_irq() merged into one
- reduce the number of DSP ops from 2 to 1:
irq_handler/thread() vs dsp_interrupt()
- drop ambiguity around CLDMA interrupt, let skl.c handle that
explicitly as it is the only user
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084857.2719593-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@vger.kernel.org
Fixes: 9fbd58cf4a ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating controls attached to widgets, there are a lot of rules if
they get their name prefixed with widget name or not. Due to that
controls ended up with weirdly looking names like "ssp0_fe DSP Volume",
while topology set it to "DSP Volume".
Fix this by setting no_wname_in_kcontrol_name to true in avs topology
widgets which disables unwanted behaviour.
Fixes: be2b81b519 ("ASoC: Intel: avs: Parse control tuples")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240418142621.2487478-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is recommended that on Lunar Lake the PIO (immediate command response)
is used instead of CORB/RIRB for commands/verbs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240409083812.14001-6-peter.ujfalusi@linux.intel.com>
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Fixes: 90f8917e7a ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Copy the few differences from mt8186-mt6166-da7219-max98357 in the
mt8186-mt6366-rt1019-rt5682s driver to greatly reduce code duplication;
since now the driver is meant to support MT8186 with the MT6366 PMIC
codec and various combinations of I2S codecs, rename the driver to
mt8186-mt6366 for consistency with MT8195 and MT8188, and rename
the configuration option to SND_SOC_MT8186_MT6366.
Since right now there is no machine using the da7219-max98357 yet, the
snd_soc_dapm_route array was omitted as it's now possible to specify
the audio routing in device trees instead.
While at it, also add the missing sentinel comment to the last entry
of the of_device_id array.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-14-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the mtk-afe-platform-driver generic mtk_afe_pcm_platform now has
a common .probe() callback, there is no reason to keep duplicating this
function over and over in the SoC specific AFE-PCM drivers: switch over
to register with the common bits instead.
Note that MT8186 was left out of this because it is registering some
extra sinegen controls in the AFE-PCM probe callback and needs extra
cleanups to be able to use the common bits.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-13-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
