IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The testcase uses event code 0x35340401e0 to verify the settings for
different fields in Monitor Mode Control Register A (MMCRA). The fields
include thresh_start, thresh_stop thresh_select, sdar mode, sample and
marked bit. Checks if these fields are translated correctly via perf
interface to MMCRA.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-21-kjain@linux.ibm.com
The testcase uses event code 0x1340000001c040 to verify the settings for
different src fields in Monitor Mode Control Register 3 (MMCR3). Checks
if these fields are translated correctly via perf interface to MMCR3 on
ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-20-kjain@linux.ibm.com
The testcases uses cycles event to verify the freeze counter settings in
Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel)
setting is used for the event attribute to check the FCxS and FCxH (
Freeze counter in privileged and hypervisor state ) settings via perf
interface.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-19-kjain@linux.ibm.com
The testcases uses event code 0x010000046080 to verify the l2l3 bit
setting for Monitor Mode Control Register 2 (MMCR2). check if this bit
is set correctly via perf interface in ISA v3.1 platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-18-kjain@linux.ibm.com
The testcase uses event code "0x26880" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The field
include PMCxCOMB. Checks if this field are translated correctly via perf
interface to MMCR1
Add selftest for mmcr1 comb field.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-16-kjain@linux.ibm.com
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set
in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-15-kjain@linux.ibm.com
The testcase uses event code 0x1001e to verify two bit settings (FC5-6
and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6
bit to be set in MMCR0 when not using Performance Monitor Counter 5 and
6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using
PMC1. Test if these fields are programmed correctly via perf interface.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-14-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to verify the
PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit
is expected to be set in MMCR0 when using Performance Monitor Counter
5 (PMC5). Checks if perf interface sets this bit correctly.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-13-kjain@linux.ibm.com
The testcase uses cycles event to check the PMCCEXT bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets
this control bit in MMCR0 on ISA v3.1 platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-12-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to check the
CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA
v3.1 platform, this bit is expected to be set in MMCR0 when using
Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done
correctly by perf interface.
CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state.
This bit is set in power10 since PMC5 and PMC6 is used in power10 for
counting instructions and cycles. Hence added a check to skip this test
in other platforms
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-11-kjain@linux.ibm.com
The testcase uses "instructions" event to verify two bits(PMAE and PMAO)
in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt,
pmae bit ( which enables performance monitor exception ) is expected to
be cleared and pmao (which indicates performance monitor alert) bit is
expected to be set in MMCR0. And testcases handles these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-10-kjain@linux.ibm.com
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 0(MMCR0) and Monitor Mode Control Register
1(MMCR1) PMU register.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-8-kjain@linux.ibm.com
Along with it, Add macros and utility functions to fetch individual
fields from Monitor Mode Control Register 2(MMCR2) register.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-7-kjain@linux.ibm.com
Extended event_init_opts() to include initialization of sampling
testcases. Patch adds an event_init_sampling() wrapper to initialize
event attribute fields for sampling events. This includes initializing
sample period, sample type and event type.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-6-kjain@linux.ibm.com
Add couple of basic utility functions to post process the mmap buffer.
It includes function to read the total number of samples present in the
mmap buffer and function to get the address of the first sample.
Add function "get_intr_regs" which will return pointer to interrupt
registers present in the sample, incase sample type
PERF_SAMPLE_REGS_INTR is set.
Add functions "get_reg_value" which can be used to read any interrupt
register value from a given sample.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-5-kjain@linux.ibm.com
Each platform has raw event encoding format which specifies the bit
positions for different fields. The fields from event code gets
translated into performance monitoring mode control register (MMCRx)
settings. Patch add macros to extract individual fields from the event
code.
Add functions for sanity checks, since testcases currently are only
supported in power9 and power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Read PVR directly rather than using /proc/cpuinfo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-4-kjain@linux.ibm.com
Add support functions for enabling perf sampling test in a new folder
"sampling_tests" under "selftests/powerpc/pmu". This includes support
functions for allocating and processing the mmap buffer. These functions
are added/defined in "sampling_tests/misc.*" files.
Also updates the corresponding Makefiles in "selftests/powerpc" and
"sampling_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Drop unneeded bits from the Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-3-kjain@linux.ibm.com
To enable the capturing of samples as part of perf event, add a new
field "mmap_buffer" to "struct event". This field is a place-holder for
sample collection
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-2-kjain@linux.ibm.com
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-3-git-send-email-atrajeev@linux.vnet.ibm.com
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Since commit 57fd251c7896 ("kbuild: split cc-option and friends to
scripts/Makefile.compiler"), some kselftests fail to build.
The tools/ directory opted out Kbuild, and went in a different
direction. People copied scripts and Makefiles to the tools/ directory
to create their own build system.
tools/build/Build.include mimics scripts/Kbuild.include, but some
tool Makefiles include the Kbuild one to import a feature that is
missing in tools/build/Build.include:
- Commit ec04aa3ae87b ("tools/thermal: tmon: use "-fstack-protector"
only if supported") included scripts/Kbuild.include from
tools/thermal/tmon/Makefile to import the cc-option macro.
- Commit c2390f16fc5b ("selftests: kvm: fix for compilers that do
not support -no-pie") included scripts/Kbuild.include from
tools/testing/selftests/kvm/Makefile to import the try-run macro.
- Commit 9cae4ace80ef ("selftests/bpf: do not ignore clang
failures") included scripts/Kbuild.include from
tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR
target.
- Commit 0695f8bca93e ("selftests/powerpc: Handle Makefile for
unrecognized option") included scripts/Kbuild.include from
tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the
try-run macro.
Copy what they need into tools/build/Build.include, and make them
include it instead of scripts/Kbuild.include.
Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/
Fixes: 57fd251c7896 ("kbuild: split cc-option and friends to scripts/Makefile.compiler")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
utils.h provides have_hwcap() and have_hwcap2() which check for a
feature bit. Those bits are defined in asm/cputable.h, so include it
in utils.h so users of utils.h don't have to do it manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-4-mpe@ellerman.id.au
Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.
Similarly TAR was added in v2.07, and the PMU event used in the stcx
fail test only works on Power8 or later.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803020719.96114-1-mpe@ellerman.id.au
We have custom stack expansion checks that it turns out are extremely
badly tested and contain bugs, surprise. So add some tests that
exercise the code and capture the current boundary conditions.
The signal test currently fails on 64-bit kernels because the 2048
byte allowance for the signal frame is too small, we will fix that in
a subsequent patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-1-mpe@ellerman.id.au
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716122142.3776261-1-mpe@ellerman.id.au
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f38 ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e9d ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
This is based on the count_instructions test.
However this one also counts the number of failed stcx's, and in
conjunction with knowing the size of the stcx loop, can calculate the
total number of instructions executed even in the face of
non-deterministic stcx failures.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426114410.3917383-1-mpe@ellerman.id.au
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507185755.GA15014@embeddedor
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
We added a usage of try-run to pmu/ebb/Makefile to detect if the
toolchain supported the -no-pie option.
This fails if we build out-of-tree and the source tree is not
writable, as try-run tries to write its temporary files to the current
directory. That leads to the -no-pie option being silently dropped,
which leads to broken executables with some toolchains.
If we remove the redirect to /dev/null in try-run, we see the error:
make[3]: Entering directory '/linux/tools/testing/selftests/powerpc/pmu/ebb'
/usr/bin/ld: cannot open output file .54.tmp: Read-only file system
collect2: error: ld returned 1 exit status
make[3]: Nothing to be done for 'all'.
And looking with strace we see it's trying to use a file that's in the
source tree:
lstat("/linux/tools/testing/selftests/powerpc/pmu/ebb/.54.tmp", 0x7ffffc0f83c8)
We can fix it by setting TMPOUT to point to the $(OUTPUT) directory,
and we can verify with strace it's now trying to write to the output
directory:
lstat("/output/kselftest/powerpc/pmu/ebb/.54.tmp", 0x7fffd1bf6bf8)
And also see that the -no-pie option is now correctly detected.
Fixes: 0695f8bca93e ("selftests/powerpc: Handle Makefile for unrecognized option")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200327095319.2347641-1-mpe@ellerman.id.au
On older distributions like Sles12SP5 gcc does not recognize
-no-pie option making the powerpc selftests build to fail
Fixes the following:
gcc: error: unrecognized command line option ‘-no-pie’
Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191113094219.14946-1-harish@linux.ibm.com
Based on 1 normalized pattern(s):
licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 99 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove duplicate headers which are included twice.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When running the ebb tests after building on a ppc64le Ubuntu machine:
$ pmu/ebb/reg_access_test: error while loading shared libraries:
R_PPC64_ADDR16_HI reloc at 0x000000013a965130 for symbol `' out of
range
This is because the Ubuntu toolchain builds has PIE enabled by default.
Change it to be always off instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.
This broke building all the powerpc selftests with eg:
make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed
Fix it by setting top_srcdir in the affected Makefiles.
Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This update consists of:
-- fixes to several existing tests from Stafford Horne
-- cpufreq tests from Viresh Kumar
-- Selftest build and install fixes from Bamvor Jian Zhang
and Michael Ellerman
-- Fixes to protection-keys tests from Dave Hansen
-- Warning fixes from Shuah Khan
-----BEGIN PGP SIGNATURE-----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=F3yO
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest update from Shuah Khan:
"This update consists of:
- fixes to several existing tests from Stafford Horne
- cpufreq tests from Viresh Kumar
- Selftest build and install fixes from Bamvor Jian Zhang and Michael
Ellerman
- Fixes to protection-keys tests from Dave Hansen
- Warning fixes from Shuah Khan"
* tag 'linux-kselftest-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests/powerpc: Fix remaining fallout from recent changes
selftests/powerpc: Fix the clean rule since recent changes
selftests: Fix the .S and .S -> .o rules
selftests: Fix the .c linking rule
selftests: Fix selftests build to just build, not run tests
selftests, x86, protection_keys: fix wrong offset in siginfo
selftests, x86, protection_keys: fix uninitialized variable warning
selftest: cpufreq: Update MAINTAINERS file
selftest: cpufreq: Add special tests
selftest: cpufreq: Add support to test cpufreq modules
selftest: cpufreq: Add suspend/resume/hibernate support
selftest: cpufreq: Add support for cpufreq tests
selftests: Add intel_pstate to TARGETS
selftests/intel_pstate: Update makefile to match new style
selftests/intel_pstate: Fix warning on loop index overflow
cpupower: Restore format of frequency-info limit
selftests/futex: Add headers to makefile dependencies
selftests/futex: Add stdio used for logging
selftests: x86 protection_keys remove dead code
selftests: x86 protection_keys fix unused variable compile warnings
...
In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk,
because lib.mk does the substitution to add $(OUTPUT).
In math the vmx and fpu names were typoed so they no longer matched
correctly, put back the 'v' and 'f'.
In tm we need to substitute $(OUTPUT) into SIGNAL_CONTEXT_CHK_TESTS so
that the rule matches.
In pmu there is an extraneous ':' on the end of $$BUILD_TARGET for the
clean and install rules, which breaks the logic in the child Makefiles.
Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Test uses PMC2 to count the event. But PMC1 is being initialized.
Patch to fix it.
Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priority than KBUILD_OUTPUT.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy to understand the purpose of these files. But mix of compiled and
uncompiled files lead to duplicated "all" and "clean" targets.
In order to remove the duplicated targets, introduce TEST_GEN_PROGS,
TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled
objects.
Also, the later patch will make use of TEST_GEN_XXX to redirect these
files to output directory indicated by KBUILD_OUTPUT or O.
And add this changes to "Contributing new tests(details)" of
Documentation/kselftest.txt.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Returning a negative value for a boolean function seem to have the
undesired effect of returning true. require_paranoia_below() is a
boolean function, but the variable used to store the return value is an
integer, receiving -1 or 0. This patch converts rc to bool, replaces -1
by false, and 0 by true.
mpe: This wasn't exhibiting in practice because the common case, where
we do the comparison of the desired level vs the current value, was
being compiled into a computation based on the result of the comparison,
ie. it wasn't using the default -1 value at all. However that was just
luck and the code is still wrong.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Load monitored won't be supported in POWER9, so PPC_FEATURE2_ARCH_3_00
(in HWCAP2) will no longer imply Load monitor support.
These Load monitored tests are enabled by PPC_FEATURE2_ARCH_3_00 so
they are now bogus and need to be removed.
This reverts commit 16c19a2e9833 ("selftests/powerpc: Load Monitor
Register Tests").
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
