IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently the QAIC DRM device registers itself when the MHI QAIC_CONTROL
channel becomes available. This is when the device is able to process
workloads. However, the DRM driver also provides the debugfs interface
bootlog for the device. If the device fails to boot to the QSM (which
brings up the MHI QAIC_CONTROL channel), the bootlog won't be available for
debugging why it failed to boot.
Change when the DRM device registers itself from when QAIC_CONTROL is
available to when the card is first probed on the PCI bus. Additionally,
make the DRM driver persist through reset/error cases so the driver
doesn't have to be reloaded to access the card again. Send
KOBJ_ONLINE/OFFLINE uevents so userspace can know when DRM device is
ready to handle requests.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-3-quic_jhugo@quicinc.com
Use QAIC_TIMESYNC MHI channel to send UTC time to device in SBL
environment. Remove support for QAIC_TIMESYNC MHI channel in AMSS
environment as it is not used in that environment.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-3-quic_jhugo@quicinc.com
Device and Host have a time synchronization mechanism that happens once
during boot when device is in SBL mode. After that, in mission-mode there
is no timesync. In an experiment after continuous operation, device time
drifted w.r.t. host by approximately 3 seconds per day. This drift leads
to mismatch in timestamp of device and Host logs. To correct this
implement periodic timesync in driver. This timesync is carried out via
QAIC_TIMESYNC_PERIODIC MHI channel.
Signed-off-by: Ajit Pal Singh <quic_ajitpals@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-2-quic_jhugo@quicinc.com
Several virtualization use-cases either don't support 32 MultiMSIs
(Xen/VMware) or have significant drawbacks to their use (KVM's vIOMMU,
which is required to support 32 MSI, needs to allocate an alternate
system memory space for each device using vIOMMU (e.g. 8GB VM mem and
2 cards => 8 + 2 * 8 = 24GB host memory required)). Support these
cases by enabling a 1 MSI fallback mode.
Whenever all 32 MSIs requested are not available, a second request for
a single MSI is made. Its success is the initiator of single MSI mode.
This mode causes all interrupts generated by the device to be directed
to the 0th MSI (firmware >=v1.10 will do this as a response to the PCIe
MSI capability configuration). Likewise, all interrupt handlers for the
device are registered to the 0th MSI.
Since the DBC interrupt handler checks if the DBC is in use or if
there is any pending changes, the 'spurious' interrupts are
disregarded. If there is work to be done, the standard threaded IRQ
handler is dispatched.
On every interrupt, the MHI handler wakes up its threaded interrupt
handler, and attempts to wake any waiters for MHI state events.
Performance is within +-0.6% for test cases that typify real world
use. Larger differences ([-4,+132]%, avg +47%) exist for very simple
tasks (e.g. addition) compiled for single NSPs. It is assumed that the
small work and many interrupts typically cause contention (e.g. 16 NSPs
vs 4 CPUs), as evidenced by the standard deviation between runs also
decreasing (r=-0.48 between delta(Performace_test) and
delta(StdDev_test/Avg_test))
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170036.5409-1-quic_jhugo@quicinc.com
Once a BO is attached with slicing configuration that BO can only be used
for that particular setting. With this new feature user can detach slicing
configuration off an already sliced BO and attach new slicing configuration
using QAIC_ATTACH_SLICE_BO.
This will support BO recycling.
detach_slice_bo() detaches slicing configuration from a BO. This new
helper function can also be used in release_dbc() as we are doing the
exact same thing.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
[jhugo: add documentation for new ioctl]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-8-quic_jhugo@quicinc.com
The Qualcomm Cloud AI 100 (AIC100) device is an Artificial Intelligence
accelerator PCIe card. It contains a number of components both in the
SoC and on the card which facilitate running workloads:
QSM: management processor
NSPs: workload compute units
DMA Bridge: dedicated data mover for the workloads
MHI: multiplexed communication channels
DDR: workload storage and memory
The Linux kernel driver for AIC100 is called "QAIC" and is located in the
accel subsystem.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-2-git-send-email-quic_jhugo@quicinc.com
The device specific directory in debugfs does not have "accel". For
example, the documentation says device 0 should have a debugfs entry as
/sys/kernel/debug/accel/accel0/ but in reality the entry is
/sys/kernel/debug/accel/0/
Fix the documentation to match the implementation.
Fixes: 8c5577a5cc ("doc: add documentation for accel subsystem")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add an introduction section for the accel subsystem. Most of the
relevant data is in the DRM documentation, so the introduction only
presents the why of the new subsystem, how are the compute accelerators
exposed to user-space and what changes need to be done in a standard
DRM driver to register it to the new accel subsystem.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
