IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Commit 5d354dc35e ("powerpc/83xx/mpc8349emitx: Make
mcu_gpiochip_remove() return void") removed the usage of the variable
ret, but failed to remove the variable itself, resulting in:
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c: In function ‘mcu_remove’:
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c:189:6: error: unused variable ‘ret’ [-Werror=unused-variable]
189 | int ret;
| ^~~
So remove the variable now.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110110739.1072634-1-u.kleine-koenig@pengutronix.de
kvmppc_h_set_dabr(), and kvmppc_h_set_xdabr() which jumps into
it, need to use _GLOBAL_TOC to setup the kernel TOC pointer, because
kvmppc_h_set_dabr() uses LOAD_REG_ADDR() to load dawr_force_enable.
When called from hcall_try_real_mode() we have the kernel TOC in r2,
established near the start of kvmppc_interrupt_hv(), so there is no
issue.
But they can also be called from kvmppc_pseries_do_hcall() which is
module code, so the access ends up happening with the kvm-hv module's
r2, which will not point at dawr_force_enable and could even cause a
fault.
With the current code layout and compilers we haven't observed a fault
in practice, the load hits somewhere in kvm-hv.ko and silently returns
some bogus value.
Note that we we expect p8/p9 guests to use the DAWR, but SLOF uses
h_set_dabr() to test if sc1 works correctly, see SLOF's
lib/libhvcall/brokensc1.c.
Fixes: c1fe190c06 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210923151031.72408-1-mpe@ellerman.id.au
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect(). If it
wasn't then the a second attempt is made to lock the page. However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity. So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.
Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.
Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
This is a single cleanup from Peter Collingbourne, removing
some dead code.
-----BEGIN PGP SIGNATURE-----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=8EFP
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann:
"This is a single cleanup from Peter Collingbourne, removing some dead
code"
* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: remove unused function syscall_set_arguments()
printk from NMI context relies on irq work being raised on the local CPU
to print to console. This can be a problem if the NMI was raised by a
lockup detector to print lockup stack and regs, because the CPU may not
enable irqs (because it is locked up).
Introduce printk_trigger_flush() that can be called another CPU to try
to get those messages to the console, call that where printk_safe_flush
was previously called.
Fixes: 93d102f094 ("printk: remove safe buffers")
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up open
coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs. 'cxl_test'
is a module built from tools/testing/cxl/ that mocks up a CXL topology
to augment the nascent support for emulation of CXL devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver and
core-infrastructure buckets. For example, mailbox handling is now a
generic core capability consumed by the PCI and cxl_test drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYYRtyQAKCRDfioYZHlFs
Z7UsAP9DzUN6IWWnYk1R95YXYVxFriRtRsBjujAqTg49EMghawEAoHaA9lxO3Hho
l25TLYUOmB/zFTlUbe6YQptMJZ5YLwY=
=im9j
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"More preparation and plumbing work in the CXL subsystem.
From an end user perspective the highlight here is lighting up the CXL
Persistent Memory related commands (label read / write) with the
generic ioctl() front-end in LIBNVDIMM.
Otherwise, the ability to instantiate new persistent and volatile
memory regions is still on track for v5.17.
Summary:
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up
open coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs.
'cxl_test' is a module built from tools/testing/cxl/ that mocks up
a CXL topology to augment the nascent support for emulation of CXL
devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver
and core-infrastructure buckets. For example, mailbox handling is
now a generic core capability consumed by the PCI and cxl_test
drivers"
* tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
ocxl: Use pci core's DVSEC functionality
cxl/pci: Use pci core's DVSEC functionality
PCI: Add pci_find_dvsec_capability to find designated VSEC
cxl/pci: Split cxl_pci_setup_regs()
cxl/pci: Add @base to cxl_register_map
cxl/pci: Make more use of cxl_register_map
cxl/pci: Remove pci request/release regions
cxl/pci: Fix NULL vs ERR_PTR confusion
cxl/pci: Remove dev_dbg for unknown register blocks
cxl/pci: Convert register block identifiers to an enum
cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS
cxl/pci: Disambiguate cxl_pci further from cxl_mem
Documentation/cxl: Add bus internal docs
cxl/core: Split decoder setup into alloc + add
tools/testing/cxl: Introduce a mock memory device + driver
cxl/mbox: Move command definitions to common location
cxl/bus: Populate the target list at decoder create
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy
cxl/pmem: Add support for multiple nvdimm-bridge objects
cxl/pmem: Translate NVDIMM label commands to CXL label commands
...
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
-----BEGIN PGP SIGNATURE-----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=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
This has served its purpose and is no longer used. All usercopy
violations appear to have been handled by now, any remaining instances
(or new bugs) will cause copies to be rejected.
This isn't a direct revert of commit 2d891fbc3b ("usercopy: Allow
strict enforcement of whitelists"); since usercopy_fallback is
effectively 0, the fallback handling is removed too.
This also removes the usercopy_fallback module parameter on slab_common.
Link: https://github.com/KSPP/linux/issues/153
Link: https://lkml.kernel.org/r/20210921061149.1091163-1-steve@sk2.org
Signed-off-by: Stephen Kitt <steve@sk2.org>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Stanley <joel@jms.id.au> [defconfig change]
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for
CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use
CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE.
Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can specify the number of hugepages to allocate at boot. But the
hugepages is balanced in all nodes at present. In some scenarios, we
only need hugepages in one node. For example: DPDK needs hugepages
which are in the same node as NIC.
If DPDK needs four hugepages of 1G size in node1 and system has 16 numa
nodes we must reserve 64 hugepages on the kernel cmdline. But only four
hugepages are used. The others should be free after boot. If the
system memory is low(for example: 64G), it will be an impossible task.
So extend the hugepages parameter to support specifying hugepages on a
specific node. For example add following parameter:
hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zhenguo Yao <yaozhenguo1@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().
Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().
Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generic version of arch_is_kernel_initmem_freed() now does the same
as powerpc version.
Remove the powerpc version.
Link: https://lkml.kernel.org/r/c53764eb45d41491e2b21da2e7812239897dbebb.1633001016.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Drop the struct pci_dev.driver pointer, which is redundant with the
struct device.driver pointer (Uwe Kleine-König)
* pci/driver:
PCI: Remove struct pci_dev->driver
PCI: Use to_pci_driver() instead of pci_dev->driver
x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver
perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver
powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver
usb: xhci: Use to_pci_driver() instead of pci_dev->driver
cxl: Use to_pci_driver() instead of pci_dev->driver
cxl: Factor out common dev->driver expressions
xen/pcifront: Use to_pci_driver() instead of pci_dev->driver
xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv
nfp: use dev_driver_string() instead of pci_dev->driver->name
mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name
net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name
net: hns3: use dev_driver_string() instead of pci_dev->driver->name
crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name
powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name
ssb: Use dev_driver_string() instead of pci_dev->driver->name
bcma: simplify reference to driver name
crypto: qat - simplify adf_enable_aer()
scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter
PCI/ERR: Factor out common dev->driver expressions
PCI: Drop pci_device_probe() test of !pci_dev->driver
PCI: Drop pci_device_remove() test of pci_dev->driver
PCI: Return NULL for to_pci_driver(NULL)
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault().
- Fix several bugs on pseries in handling of device tree cache information for hotplugged
CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan,
Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel
Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo
A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring,
Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, Xiaoming Ni,
-----BEGIN PGP SIGNATURE-----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=f7HE
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it
to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to
do_page_fault().
- Fix several bugs on pseries in handling of device tree cache
information for hotplugged CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin,
Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le
Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis
Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari
Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas
Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar
Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, and Xiaoming Ni,
* tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits)
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
powerpc/32e: Ignore ESR in instruction storage interrupt handler
powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
MAINTAINERS: Update powerpc KVM entry
powerpc/xmon: fix task state output
powerpc/44x/fsp2: add missing of_node_put
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling
powerpc/security: Use a mutex for interrupt exit code patching
powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void
powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs
powerpc/book3e: Fix set_memory_x() and set_memory_nx()
powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
powerpc/bpf: Fix write protecting JIT code
selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh
powerpc/64s/interrupt: Fix check_return_regs_valid() false positive
powerpc/boot: Set LC_ALL=C in wrapper script
powerpc/64s: Default to 64K pages for 64 bit book3s
Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
...
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089,
tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards,
and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
-----BEGIN PGP SIGNATURE-----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=dQa6
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock. In the most basic scenario, that buffer will not be
resident and it will be mapped to the same file. Accessing the buffer
will trigger a page fault, and gfs2 will deadlock trying to take the
same inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled.
-----BEGIN PGP SIGNATURE-----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=WeNd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmGANdUUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOmihAAgKSTv4Jf0s4yopdcxfuLweiyqHX1
719QJzdLZohmllrJPq/83FZL9qodCzxy87nAm67Ht0baSKiEjtVgRaVCqJWEE+l6
oQL+wUsGLP7CmExOP503Uh6tW35AhETQA4Uwu6QtiUYLYG17kAgeR3cTFuekUsJS
iL4K65PXE2bBxMe7Ta1YIZqcxptbknMgpqYkdne7xs7RS+UiVj8TyRle6ACrfzEX
IVy4LTk+spHCy1a494g9pt/21xOnbiLHr/FpckALscnvJiUThxbfQHGSQeMpM4uM
BnwCqFrj860vMeh52M11/GAAXmdPh6AjoLhaSIW2I3M2GbV8ZP2hu1HYUz3osmrT
f+aeMPJ4feX1xVj6qAC+1G83XRO83tP/YIEuocGiwyepImB25NHPin21xepf6Ru0
wJX+aXC9O1eG6E2ghT6tBim/MpeNH5OT0hNO3uhGmEQ6xZpArRVVaBwlEdufJiCx
ZljqEFUT7wA9nGEQif6GdLnGezGr/aNL65caTkIAzHKamd79QIr7VZXYjYIfHSqE
p74Aro6E8qoQJjsTSkvZceM0u1LRzwS4wPRroE6eGz98oYDpiDm1RPb+9Gw5jyJf
JN7UjJKO9+iPGAi3KivGBqpBskw4cCp2y/nHrMYmpGUPELcr5kQtDfQ6yp59tVZ8
Dwo5GeSlG6khmiI=
=WrEw
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only denying
others). There's been pressure to allow non root to tracefs in a
controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function tracer
instead of having its own trampoline (this change will happen on an arch
by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform calculations
against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent warnings
from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over if
branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
=Loz8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
Hi Linus,
Please, pull the following hardening fixes and cleanups that I've
been collecting during the last development cycle. All of them have
been baking in linux-next.
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments (Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic (Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=Jk0U
-----END PGP SIGNATURE-----
Merge tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
Cross-architecture update to move task_struct::cpu back into thread_info
on arm64, x86, s390, powerpc, and riscv. All Acked by arch maintainers.
Quoting Ard Biesheuvel:
"Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that define
raw_smp_processor_id() in terms of this field, as it requires
linux/sched.h to be included, which causes a lot of pain in terms of
circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from) for all
architectures that enable THREAD_INFO_IN_TASK, addressing the header
soup issue as well as some pointless differences in the implementations
of task_cpu() and set_task_cpu()."
-----BEGIN PGP SIGNATURE-----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=PzvV
-----END PGP SIGNATURE-----
Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
"Cross-architecture update to move task_struct::cpu back into
thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
maintainers.
Quoting Ard Biesheuvel:
'Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that
define raw_smp_processor_id() in terms of this field, as it
requires linux/sched.h to be included, which causes a lot of pain
in terms of circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from)
for all architectures that enable THREAD_INFO_IN_TASK, addressing
the header soup issue as well as some pointless differences in the
implementations of task_cpu() and set_task_cpu()'"
* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
riscv: rely on core code to keep thread_info::cpu updated
powerpc: smp: remove hack to obtain offset of task_struct::cpu
sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
powerpc: add CPU field to struct thread_info
s390: add CPU field to struct thread_info
x86: add CPU field to struct thread_info
arm64: add CPU field to struct thread_info
by confidential computing solutions to query different aspects of the
system. The intent behind it is to unify testing of such aspects instead
of having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess.
-----BEGIN PGP SIGNATURE-----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=Na0U
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes. The main use case is emulating Windows' WaitForMultipleObjects
which allows Wine to improve the performance of Windows Games. Also
native Linux games can benefit from this interface as this is a common
wait pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to rework
their eviction code step by step without making lockdep upset until the
final steps of rework are completed. It's also useful for regulator and
TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=RZ4x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
core:
- Allow ftrace to instrument parts of the perf core code
- Add a new mem_hops field to perf_mem_data_src which allows to represent
intra-node/package or inter-node/off-package details to prepare for
next generation systems which have more hieararchy within the
node/pacakge level.
tools:
- Update for the new mem_hops field in perf_mem_data_src
arch:
- A set of constraints fixes for the Intel uncore PMU
- The usual set of small fixes and improvements for x86 and PPC
-----BEGIN PGP SIGNATURE-----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=Oj0G
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Core:
- Allow ftrace to instrument parts of the perf core code
- Add a new mem_hops field to perf_mem_data_src which allows to
represent intra-node/package or inter-node/off-package details to
prepare for next generation systems which have more hieararchy
within the node/pacakge level.
Tools:
- Update for the new mem_hops field in perf_mem_data_src
Arch:
- A set of constraints fixes for the Intel uncore PMU
- The usual set of small fixes and improvements for x86 and PPC"
* tag 'perf-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings
powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
tools/perf: Add mem_hops field in perf_mem_data_src structure
perf: Add mem_hops field in perf_mem_data_src structure
perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line
perf/core: Allow ftrace for functions in kernel/event/core.c
perf/x86: Add new event for AUX output counter index
perf/x86: Add compiler barrier after updating BTS
perf/x86/intel/uncore: Fix Intel SPR M3UPI event constraints
perf/x86/intel/uncore: Fix Intel SPR M2PCIE event constraints
perf/x86/intel/uncore: Fix Intel SPR IIO event constraints
perf/x86/intel/uncore: Fix Intel SPR CHA event constraints
perf/x86/intel/uncore: Fix Intel ICX IIO event constraints
perf/x86/intel/uncore: Fix invalid unit check
perf/x86/intel/uncore: Support extra IMC channel on Ice Lake server
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
parisc, ia64 and powerpc32 are the only remaining architectures that
provide custom arch_{spin,read,write}_lock_flags() functions, which are
meant to re-enable interrupts while waiting for a spinlock.
However, none of these can actually run into this codepath, because
it is only called on architectures without CONFIG_GENERIC_LOCKBREAK,
or when CONFIG_DEBUG_LOCK_ALLOC is set without CONFIG_LOCKDEP, and none
of those combinations are possible on the three architectures.
Going back in the git history, it appears that arch/mn10300 may have
been able to run into this code path, but there is a good chance that
it never worked. On the architectures that still exist, it was
already impossible to hit back in 2008 after the introduction of
CONFIG_GENERIC_LOCKBREAK, and possibly earlier.
As this is all dead code, just remove it and the helper functions built
around it. For arch/ia64, the inline asm could be cleaned up, but
it seems safer to leave it untouched.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20211022120058.1031690-1-arnd@kernel.org
Three commits fixing some issues introduced with the recent IOMMU changes we merged.
Thanks to: Alexey Kardashevskiy
-----BEGIN PGP SIGNATURE-----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=R9Yq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three commits fixing some issues introduced with the recent IOMMU
changes we merged.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present
powerpc/pseries/iommu: Check if the default window in use before removing it
powerpc/pseries/iommu: Use correct vfree for it_map
Now that force_fatal_sig exists it is unnecessary and a bit confusing
to use force_sigsegv in cases where the simpler force_fatal_sig is
wanted. So change every instance we can to make the code clearer.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reduce maintenance burden of DVSEC query implementation by using the
centralized PCI core implementation.
There are two obvious places to simply drop in the new core
implementation. There remains find_dvsec_from_pos() which would benefit
from using a core implementation. As that change is less trivial it is
reserved for later.
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> (v1)
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/163379789065.692348.7117946955275586530.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A e5500 machine running a 32-bit kernel sometimes hangs at boot,
seemingly going into an infinite loop of instruction storage interrupts.
The ESR (Exception Syndrome Register) has a value of 0x800000 (store)
when this happens, which is likely set by a previous store. An
instruction TLB miss interrupt would then leave ESR unchanged, and if no
PTE exists it calls directly to the instruction storage interrupt
handler without changing ESR.
access_error() does not cause a segfault due to a store to a read-only
vma because is_exec is true. Most subsequent fault handling does not
check for a write fault on a read-only vma, and might do strange things
like create a writeable PTE or call page_mkwrite on a read only vma or
file. It's not clear what happens here to cause the infinite faulting in
this case, a fault handler failure or low level PTE or TLB handling.
In any case this can be fixed by having the instruction storage
interrupt zero regs->dsisr rather than storing the ESR value to it.
Fixes: a01a3f2ddb ("powerpc: remove arguments from fault handler functions")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Jacques de Laval <jacques.delaval@protonmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Jacques de Laval <jacques.delaval@protonmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211028133043.4159501-1-npiggin@gmail.com
When ARCH_SUPPORTS_DEBUG_PAGEALLOC is not selected, the user can
still select CONFIG_DEBUG_PAGEALLOC in which case __kernel_map_pages()
is provided by mm/page_poison.c
So only define __kernel_map_pages() when both
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC and CONFIG_DEBUG_PAGEALLOC
are defined.
Fixes: 68b44f94d6 ("powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/971b69739ff4746252e711a9845210465c023a9e.1635425947.git.christophe.leroy@csgroup.eu
Early exits from for_each_compatible_node() should decrement the
node reference counter. Reported by Coccinelle:
./arch/powerpc/platforms/44x/fsp2.c:206:1-25: WARNING: Function
"for_each_compatible_node" should have of_node_put() before return
around line 218.
Fixes: 7813043e1b ("powerpc/44x/fsp2: Add irq error handlers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1635406102-88719-1-git-send-email-cuibixuan@linux.alibaba.com
In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:
cmpli cr0,r3,1024
This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.
It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.
dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.
Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:
arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
cmpli 0,%r3,1024; ...
^
Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Commit 112665286d ("KVM: PPC: Book3S HV: Context tracking exit guest
context before enabling irqs") moved guest_exit() into the interrupt
protected area to avoid wrong context warning (or worse). The problem is
that tick-based time accounting has not yet been updated at this point
(because it depends on the timer interrupt firing), so the guest time
gets incorrectly accounted to system time.
To fix the problem, follow the x86 fix in commit 1604571401 ("Defer
vtime accounting 'til after IRQ handling"), and allow host IRQs to run
before accounting the guest exit time.
In the case vtime accounting is enabled, this is not required because TB
is used directly for accounting.
Before this patch, with CONFIG_TICK_CPU_ACCOUNTING=y in the host and a
guest running a kernel compile, the 'guest' fields of /proc/stat are
stuck at zero. With the patch they can be observed increasing roughly as
expected.
Fixes: e233d54d4d ("KVM: booke: use __kvm_guest_exit")
Fixes: 112665286d ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs")
Cc: stable@vger.kernel.org # 5.12+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
[np: only required for tick accounting, add Book3E fix, tweak changelog]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027142150.3711582-1-npiggin@gmail.com
The mitigation-patching.sh script in the powerpc selftests toggles
all mitigations on and off simultaneously, revealing that rfi_flush
and stf_barrier cannot safely operate at the same time due to races
in updating the static key.
On some systems, the static key code throws a warning and the kernel
remains functional. On others, the kernel will hang or crash.
Fix this by slapping on a mutex.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027072410.40950-1-ruscur@russell.cc
As the documentation explained, ftrace_test_recursion_trylock()
and ftrace_test_recursion_unlock() were supposed to disable and
enable preemption properly, however currently this work is done
outside of the function, which could be missing by mistake.
And since the internal using of trace_test_and_set_recursion()
and trace_clear_recursion() also require preemption disabled, we
can just merge the logical.
This patch will make sure the preemption has been disabled when
trace_test_and_set_recursion() return bit >= 0, and
trace_clear_recursion() will enable the preemption if previously
enabled.
Link: https://lkml.kernel.org/r/13bde807-779c-aa4c-0672-20515ae365ea@linux.alibaba.com
CC: Petr Mladek <pmladek@suse.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Miroslav Benes <mbenes@suse.cz>
Reported-by: Abaci <abaci@linux.alibaba.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
[ Removed extra line in comment - SDR ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Up to now mcu_gpiochip_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211021105657.72572-1-u.kleine-koenig@pengutronix.de
Building tqm8541_defconfig results in:
arch/powerpc/mm/nohash/fsl_book3e.c: In function 'settlbcam':
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: error: '_PAGE_BAP_SX' undeclared (first use in this function)
126 | TLBCAM[index].MAS3 |= (flags & _PAGE_BAP_SX) ? MAS3_SX : 0;
| ^~~~~~~~~~~~
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [scripts/Makefile.build:277: arch/powerpc/mm/nohash/fsl_book3e.o] Error 1
make[2]: *** [scripts/Makefile.build:540: arch/powerpc/mm/nohash] Error 2
make[1]: *** [scripts/Makefile.build:540: arch/powerpc/mm] Error 2
make: *** [Makefile:1868: arch/powerpc] Error 2
This is because _PAGE_BAP_SX is not defined when using 32 bits PTE.
Now that _PAGE_EXEC contains both _PAGE_BAP_SX and _PAGE_BAP_UX, it can be used instead.
Fixes: 01116e6e98 ("powerpc/fsl_booke: Take exec flag into account when setting TLBCAMs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91a0235e7f2a85308b84aa5b9efd8d022e2b899a.1635226743.git.christophe.leroy@csgroup.eu
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Commit 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
changed those two functions to use pte helpers to determine which
bits to clear and which bits to set.
This change was based on the assumption that bits to be set/cleared
are always the same and can be determined by applying the pte
manipulation helpers on __pte(0).
But on platforms like book3e, the bits depend on whether the page
is a user page or not.
For the time being it more or less works because of _PAGE_EXEC being
used for user pages only and exec right being set at all time on
kernel page. But following patch will clean that and output of
pte_mkexec() will depend on the page being a user or kernel page.
Instead of trying to make an even more complicated helper where bits
would become dependent on the final pte value, come back to a more
static situation like before commit 26973fa5ac ("powerpc/mm: use
pte helpers in generic code"), by introducing an 8xx specific
version of __ptep_set_access_flags() and ptep_set_wrprotect().
Fixes: 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/922bdab3a220781bae2360ff3dd5adb7fe4d34f1.1635226743.git.christophe.leroy@csgroup.eu
Running program with bpf-to-bpf function calls results in data access
exception (0x300) with the below call trace:
bpf_int_jit_compile+0x238/0x750 (unreliable)
bpf_check+0x2008/0x2710
bpf_prog_load+0xb00/0x13a0
__sys_bpf+0x6f4/0x27c0
sys_bpf+0x2c/0x40
system_call_exception+0x164/0x330
system_call_vectored_common+0xe8/0x278
as bpf_int_jit_compile() tries writing to write protected JIT code
location during the extra pass.
Fix it by holding off write protection of JIT code until the extra
pass, where branch target addresses fixup happens.
Fixes: 62e3d4210a ("powerpc/bpf: Write protect JIT code")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025055649.114728-1-hbathini@linux.ibm.com
The check_return_regs_valid() can cause a false positive if the return
regs are marked as norestart and they are an HSRR type interrupt,
because the low bit in the bottom of regs->trap causes interrupt type
matching to fail.
This can occcur for example on bare metal with a HV privileged doorbell
interrupt that causes a signal, but do_signal returns early because
get_signal() fails, and takes the "No signal to deliver" path. In this
case no signal was delivered so the return location is not changed so
return SRRs are not invalidated, yet set_trap_norestart is called, which
messes up the match. Building go-1.16.6 is known to reproduce this.
Fix it by using the TRAP() accessor which masks out the low bit.
Fixes: 6eaaf9de35 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
While trying to build a simple Image for ACADIA platform, I got the
following error:
WRAP arch/powerpc/boot/simpleImage.acadia
INFO: Uncompressed kernel (size 0x6ae7d0) overlaps the address of the wrapper(0x400000)
INFO: Fixing the link_address of wrapper to (0x700000)
powerpc64-linux-gnu-ld : mode d'émulation non reconnu : -T
Émulations prises en charge : elf64ppc elf32ppc elf32ppclinux elf32ppcsim elf64lppc elf32lppc elf32lppclinux elf32lppcsim
make[1]: *** [arch/powerpc/boot/Makefile:424 : arch/powerpc/boot/simpleImage.acadia] Erreur 1
make: *** [arch/powerpc/Makefile:285 : simpleImage.acadia] Erreur 2
Trying again with V=1 shows the following command
powerpc64-linux-gnu-ld -m -T arch/powerpc/boot/zImage.lds -Ttext 0x700000 --no-dynamic-linker -o arch/powerpc/boot/simpleImage.acadia -Map wrapper.map arch/powerpc/boot/fixed-head.o arch/powerpc/boot/simpleboot.o ./zImage.3278022.o arch/powerpc/boot/wrapper.a
The argument of '-m' is missing.
This is due to the wrapper script calling 'objdump -p vmlinux' and
looking for 'file format', whereas the output of objdump is:
vmlinux: format de fichier elf32-powerpc
En-tête de programme:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Add LC_ALL=C at the beginning of the wrapper script in order to get the
output expected by the script:
vmlinux: file format elf32-powerpc
Program Header:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9ff3bc98035f63b122c051f02dc47c7aed10430.1635256089.git.christophe.leroy@csgroup.eu
For 64-bit book3s the default should be 64K as that's what modern CPUs
are designed for.
The following defconfigs already set CONFIG_PPC_64K_PAGES:
cell_defconfig
pasemi_defconfig
powernv_defconfig
ppc64_defconfig
pseries_defconfig
skiroot_defconfig
The have the option removed from the defconfig, as it is now the
default.
The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain
their existing behaviour are:
g5_defconfig
maple_defconfig
microwatt_defconfig
ps3_defconfig
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/109
Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au
This reverts commit 566af8cda3.
This caused some conflicts vs the audit tree, and the audit maintainers
would prefer we postpone this to the next merge window so we have more
time for testing.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the register state may be partial and corrupted instead of calling
do_exit, call force_sigsegv(SIGSEGV). Which properly kills the
process with SIGSEGV and does not let any more userspace code execute,
instead of just killing one thread of the process and potentially
confusing everything.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: 756f1ae8a44e ("PPC32: Rework signal code and add a swapcontext system call.")
Fixes: 04879b04bf50 ("[PATCH] ppc64: VMX (Altivec) support & signal32 rework, from Ben Herrenschmidt")
Link: https://lkml.kernel.org/r/20211020174406.17889-7-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The iommu_init_table() helper takes an address range to reserve in
the IOMMU table being initialized to exclude MMIO addresses, this is
useful if the window stretches far beyond 4GB (although wastes some TCEs).
At the moment the code searches for such MMIO32 range and fails if none
found which is considered a problem while it really is not: it is actually
better as this says there is no MMIO32 to reserve and we can use
usually wasted TCEs. Furthermore PHYP never actually allows creating
windows starting at busaddress=0 so this MMIO32 range is never useful.
This removes error exit and initializes the table with zero range if
no MMIO32 is detected.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-5-aik@ozlabs.ru
At the moment this check is performed after we remove the default window
which is late and disallows to revert whatever changes enable_ddw()
has made to DMA windows.
This moves the check and error exit before removing the window.
This raised the message severity from "debug" to "warning" as this
should not happen in practice and cannot be triggered by the userspace.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-4-aik@ozlabs.ru
The it_map array is vzalloc'ed so use vfree() for it when creating
a huge DMA window failed for whatever reason.
While at this, write zero to it_map.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-3-aik@ozlabs.ru
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d516 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
On VMs with NX encryption, compression, and/or RNG offload, these
capabilities are described by nodes in the ibm,platform-facilities device
tree hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
├── ibm,compression-v1
├── ibm,random-v1
└── ibm,sym-encryption-v1
3 directories
The acceleration functions that these nodes describe are not disrupted by
live migration, not even temporarily.
But the post-migration ibm,update-nodes sequence firmware always sends
"delete" messages for this hierarchy, followed by an "add" directive to
reconstruct it via ibm,configure-connector (log with debugging statements
enabled in mobility.c):
mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285
mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284
mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283
mobility: removing node /ibm,platform-facilities:4294967286
...
mobility: added node /ibm,platform-facilities:4294967286
Note we receive a single "add" message for the entire hierarchy, and what
we receive from the ibm,configure-connector sequence is the top-level
platform-facilities node along with its three children. The debug message
simply reports the parent node and not the whole subtree.
Also, significantly, the nodes added are almost completely equivalent to
the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in
the leaf nodes is the only property I've observed to differ, and Linux does
not use that. So in practice, the sum of update messages Linux receives for
this hierarchy is equivalent to minor property updates.
We succeed in removing the original hierarchy from the device tree. But the
vio bus code is ignorant of this, and does not unbind or relinquish its
references. The leaf nodes, still reachable through sysfs, of course still
refer to the now-freed ibm,platform-facilities parent node, which makes
use-after-free possible:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0
refcount_warn_saturate+0x160/0x1f0 (unreliable)
kobject_get+0xf0/0x100
of_node_get+0x30/0x50
of_get_parent+0x50/0xb0
of_fwnode_get_parent+0x54/0x90
fwnode_count_parents+0x50/0x150
fwnode_full_name_string+0x30/0x110
device_node_string+0x49c/0x790
vsnprintf+0x1c0/0x4c0
sprintf+0x44/0x60
devspec_show+0x34/0x50
dev_attr_show+0x40/0xa0
sysfs_kf_seq_show+0xbc/0x200
kernfs_seq_show+0x44/0x60
seq_read_iter+0x2a4/0x740
kernfs_fop_read_iter+0x254/0x2e0
new_sync_read+0x120/0x190
vfs_read+0x1d0/0x240
Moreover, the "new" replacement subtree is not correctly added to the
device tree, resulting in ibm,platform-facilities parent node without the
appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
0 directories
$ cd /sys/devices/vio ; find . -xtype l -exec file {} +
./ibm,sym-encryption-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1
./ibm,random-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1
./ibm,compression-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1
This is because add_dt_node() -> dlpar_attach_node() attaches only the
parent node returned from configure-connector, ignoring any children. This
should be corrected for the general case, but fixing that won't help with
the stale OF node references, which is the more urgent problem.
One way to address that would be to make the drivers respond to node
removal notifications, so that node references can be dropped
appropriately. But this would likely force the drivers to disrupt active
clients for no useful purpose: equivalent nodes are immediately re-added.
And recall that the acceleration capabilities described by the nodes remain
available throughout the whole process.
The solution I believe to be robust for this situation is to convert
remove+add of a node with an unchanged phandle to an update of the node's
properties in the Linux device tree structure. That would involve changing
and adding a fair amount of code, and may take several iterations to land.
Until that can be realized we have a confirmed use-after-free and the
possibility of memory corruption. So add a limited workaround that
discriminates on the node type, ignoring adds and removes. This should be
amenable to backporting in the meantime.
Fixes: 410bccf978 ("powerpc/pseries: Partition migration in the kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com
Long time ago we had a config item called STRICT_MM_TYPECHECKS
to build the kernel with pte_t defined as a structure in order
to perform additional build checks or build it with pte_t
defined as a simple type in order to get simpler generated code.
Commit 670eea9241 ("powerpc/mm: Always use STRICT_MM_TYPECHECKS")
made the struct based definition the only one, considering that the
generated code was similar in both cases.
That's right on ppc64 because the ABI is such that the content of a
struct having a single simple type element is passed as register,
but on ppc32 such a structure is passed via the stack like any
structure.
Simple test function:
pte_t test(pte_t pte)
{
return pte;
}
Before this patch we get
c00108ec <test>:
c00108ec: 81 24 00 00 lwz r9,0(r4)
c00108f0: 91 23 00 00 stw r9,0(r3)
c00108f4: 4e 80 00 20 blr
So, for PPC32, restore the simple type behaviour we got before
commit 670eea9241, but instead of adding a config option to
activate type check, do it when __CHECKER__ is set so that type
checking is performed by 'sparse' and provides feedback like:
arch/powerpc/mm/pgtable.c:466:16: warning: incorrect type in return expression (different base types)
arch/powerpc/mm/pgtable.c:466:16: expected unsigned long
arch/powerpc/mm/pgtable.c:466:16: got struct pte_t [usertype] x
With this patch we now get
c0010890 <test>:
c0010890: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Define STRICT_MM_TYPECHECKS rather than repeating the condition]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c904599f33aaf6bb7ee2836a9ff8368509e0d78d.1631887042.git.christophe.leroy@csgroup.eu
CONFIG_STRICT_KERNEL_RWX should be set by default on every
architectures (See https://github.com/KSPP/linux/issues/4)
On PPC32 we have to find a compromise between performance and/or
memory wasting and selection of strict_kernel_rwx, because it implies
either smaller memory chunks or larger alignment between RO memory
and RW memory.
For instance the 8xx maps memory with 8M pages. So either the limit
between RO and RW must be 8M aligned or it falls back or 512k pages
which implies more pressure on the TLB.
book3s/32 maps memory with BATs as much as possible. BATS can have
any power-of-two size between 128k and 256M but we have only 4 to 8
BATs so the alignment must be good enough to allow efficient use of
the BATs and avoid falling back on standard page mapping which would
kill performance.
So let's go one step forward and make it the default but still allow
users to unset it when wanted.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/057c40164084bfc7d77c0b2ff78d95dbf6a2a21b.1632503622.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() and put_user() are granting userspace access and
are exclusively for userspace access.
Convert single step emulation functions to user_access_begin() and
friends and use unsafe_get_user() and unsafe_put_user().
When addressing kernel addresses, there is no need to open userspace
access. And for book3s/32 it is particularly important to no try and
open userspace access on kernel address, because that would break the
content of kernel space segment registers. No guard has been put
against that risk in order to avoid degrading performance.
copy_from_kernel_nofault() and copy_to_kernel_nofault() should
be used but they are out-of-line functions which would degrade
performance. Those two functions are making use of
__get_kernel_nofault() and __put_kernel_nofault() macros.
Those two macros are just wrappers behind __get_user_size_goto() and
__put_user_size_goto().
unsafe_get_user() and unsafe_put_user() are also wrappers of
__get_user_size_goto() and __put_user_size_goto(). Use them to
access kernel space. That allows refactoring userspace and
kernelspace access.
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: 4fe5cda9f8 ("powerpc/uaccess: Implement user_read_access_begin and user_write_access_begin")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/22831c9d17f948680a12c5292e7627288b15f713.1631817805.git.christophe.leroy@csgroup.eu
dcbz instruction shouldn't be used on non-cached memory. Using
it on non-cached memory can result in alignment exception and
implies a heavy handling.
Instead of silentely emulating the instruction and resulting in high
performance degradation, warn whenever an alignment exception is
taken in kernel mode due to dcbz, so that the user is made aware that
dcbz instruction has been used unexpectedly by the kernel.
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2e3acfe63d289c6fba366e16973c9ab8369e8b75.1631803922.git.christophe.leroy@csgroup.eu
Add support for out-of-line static calls on PPC32. This change
improve performance of calls to global function pointers by
using direct calls instead of indirect calls.
The trampoline is initialy populated with a 'blr' or branch to target,
followed by an unreachable long jump sequence.
In order to cater with parallele execution, the trampoline needs to
be updated in a way that ensures it remains consistent at all time.
This means we can't use the traditional lis/addi to load r12 with
the target address, otherwise there would be a window during which
the first instruction contains the upper part of the new target
address while the second instruction still contains the lower part of
the old target address. To avoid that the target address is stored
just after the 'bctr' and loaded from there with a single instruction.
Then, depending on the target distance, arch_static_call_transform()
will either replace the first instruction by a direct 'bl <target>' or
'nop' in order to have the trampoline fall through the long jump
sequence.
For the special case of __static_call_return0(), to avoid the risk of
a far branch, a version of it is inlined at the end of the trampoline.
Performancewise the long jump sequence is probably not better than
the indirect calls set by GCC when we don't use static calls, but
such calls are unlikely to be required on powerpc32: With most
configurations the kernel size is far below 32 Mbytes so only
modules may happen to be too far. And even modules are likely to
be close enough as they are allocated below the kernel core and
as close as possible of the kernel text.
static_call selftest is running successfully with this change.
With this patch, __do_irq() has the following sequence to trace
irq entries:
c0004a00 <__SCT__tp_func_irq_entry>:
c0004a00: 48 00 00 e0 b c0004ae0 <__traceiter_irq_entry>
c0004a04: 3d 80 c0 00 lis r12,-16384
c0004a08: 81 8c 4a 1c lwz r12,18972(r12)
c0004a0c: 7d 89 03 a6 mtctr r12
c0004a10: 4e 80 04 20 bctr
c0004a14: 38 60 00 00 li r3,0
c0004a18: 4e 80 00 20 blr
c0004a1c: 00 00 00 00 .long 0x0
...
c0005654 <__do_irq>:
...
c0005664: 7c 7f 1b 78 mr r31,r3
...
c00056a0: 81 22 00 00 lwz r9,0(r2)
c00056a4: 39 29 00 01 addi r9,r9,1
c00056a8: 91 22 00 00 stw r9,0(r2)
c00056ac: 3d 20 c0 af lis r9,-16209
c00056b0: 81 29 74 cc lwz r9,29900(r9)
c00056b4: 2c 09 00 00 cmpwi r9,0
c00056b8: 41 82 00 10 beq c00056c8 <__do_irq+0x74>
c00056bc: 80 69 00 04 lwz r3,4(r9)
c00056c0: 7f e4 fb 78 mr r4,r31
c00056c4: 4b ff f3 3d bl c0004a00 <__SCT__tp_func_irq_entry>
Before this patch, __do_irq() was doing the following to trace irq
entries:
c0005700 <__do_irq>:
...
c0005710: 7c 7e 1b 78 mr r30,r3
...
c000574c: 93 e1 00 0c stw r31,12(r1)
c0005750: 81 22 00 00 lwz r9,0(r2)
c0005754: 39 29 00 01 addi r9,r9,1
c0005758: 91 22 00 00 stw r9,0(r2)
c000575c: 3d 20 c0 af lis r9,-16209
c0005760: 83 e9 f4 cc lwz r31,-2868(r9)
c0005764: 2c 1f 00 00 cmpwi r31,0
c0005768: 41 82 00 24 beq c000578c <__do_irq+0x8c>
c000576c: 81 3f 00 00 lwz r9,0(r31)
c0005770: 80 7f 00 04 lwz r3,4(r31)
c0005774: 7d 29 03 a6 mtctr r9
c0005778: 7f c4 f3 78 mr r4,r30
c000577c: 4e 80 04 21 bctrl
c0005780: 85 3f 00 0c lwzu r9,12(r31)
c0005784: 2c 09 00 00 cmpwi r9,0
c0005788: 40 82 ff e4 bne c000576c <__do_irq+0x6c>
Behind the fact of now using a direct 'bl' instead of a
'load/mtctr/bctr' sequence, we can also see that we get one less
register on the stack.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6ec2a7865ed6a5ec54ab46d026785bafe1d837ea.1630484892.git.christophe.leroy@csgroup.eu
ppc_md.iommu_save() is not set anymore by any platform after
commit c40785ad30 ("powerpc/dart: Use a cachable DART").
So iommu_save() has become a nop and can be removed.
ppc_md.show_percpuinfo() is not set anymore by any platform after
commit 4350147a81 ("[PATCH] ppc64: SMU based macs cpufreq support").
Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were
removed by commit 0f03a43b8f ("[POWERPC] Remove todc code from
ARCH=powerpc")
Last user of kgdb_map_scc() was removed by commit 17ce452f7e ("kgdb,
powerpc: arch specific powerpc kgdb support").
ppc.machine_kexec_prepare() has not been used since
commit 8ee3e0d696 ("powerpc: Remove the main legacy iSerie platform
code"). This allows the removal of machine_kexec_prepare() and the
rename of default_machine_kexec_prepare() into machine_kexec_prepare()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
[mpe: Drop prototype for default_machine_kexec_prepare() as noted by dja]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24d4ca0ada683c9436a5f812a7aeb0a1362afa2b.1630398606.git.christophe.leroy@csgroup.eu
Commit d75d68cfef ("powerpc: Clean up obsolete code relating to
decrementer and timebase") made generic_suspend_enable_irqs() and
generic_suspend_disable_irqs() static.
Fold them into their only caller.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c3f9ec9950394ef939014f7934268e6ee30ca04f.1630398566.git.christophe.leroy@csgroup.eu
Commit e65e1fc2d2 ("[PATCH] syscall class hookup for all normal
targets") added generic support for AUDIT but that didn't include
support for bi-arch like powerpc.
Commit 4b58841149 ("audit: Add generic compat syscall support")
added generic support for bi-arch.
Convert powerpc to that bi-arch generic audit support.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b3951d1191d4183d92a07a6097566bde60d00a.1629812058.git.christophe.leroy@csgroup.eu
Instructions lmw/stmw are interesting for functions that are rarely
used and not in the cache, because only one instruction is to be
copied into the instruction cache instead of 19. However those
instruction are less performant than 19x raw lwz/stw as they require
synchronisation plus one additional cycle.
SAVE_NVGPRS / REST_NVGPRS are used in only a few places which are
mostly in interrupts entries/exits and in task switch so they are
likely already in the cache.
Using standard lwz improves null_syscall selftest by:
- 10 cycles on mpc832x.
- 2 cycles on mpc8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/316c543b8906712c108985c8463eec09c8db577b.1629732542.git.christophe.leroy@csgroup.eu
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
(!ptr && !ptr->foo) strikes again. :)
The expression (!ptr && !ptr->foo) is bogus and in case ptr is NULL,
it leads to a NULL pointer dereference: ptr->foo.
Fix this by converting && to ||
This issue was detected with the help of Coccinelle, and audited and
fixed manually.
Fixes: 1a0d0d5ed5 ("powerpc/vas: Add platform specific user window operations")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015050345.GA1161918@embeddedor
Enable STRICT_KERNEL_RWX on fsl_booke.
For that, we need additional TLBCAMs dedicated to linear mapping,
based on the alignment of _sinittext.
By default, up to 768 Mbytes of memory are mapped.
It uses 3 TLBCAMs of size 256 Mbytes.
With a data alignment of 16, we need up to 9 TLBCAMs:
16/16/16/16/64/64/64/256/256
With a data alignment of 4, we need up to 12 TLBCAMs:
4/4/4/4/16/16/16/64/64/64/256/256
With a data alignment of 1, we need up to 15 TLBCAMs:
1/1/1/1/4/4/4/16/16/16/64/64/64/256/256
By default, set a 16 Mbytes alignment as a compromise between memory
usage and number of TLBCAMs. This can be adjusted manually when needed.
For the time being, it doens't work when the base is randomised.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/29f9e5d2bbbc83ae9ca879265426a6278bf4d5bb.1634292136.git.christophe.leroy@csgroup.eu
Reorganise TLBCAM allocation so that when STRICT_KERNEL_RWX is
enabled, TLBCAMs are allocated such that readonly memory uses
different TLBCAMs.
This results in an allocation looking like:
Memory CAM mapping: 4/4/4/1/1/1/1/16/16/16/64/64/64/256/256 Mb, residual: 256Mb
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ca169bc288261a0e0558712f979023c3a960ebb.1634292136.git.christophe.leroy@csgroup.eu
Avoid switching to AS1 when reloading TLBCAM after init for
STRICT_KERNEL_RWX.
When we setup AS1 we expect the entire accessible memory to be mapped
through one entry, this is not the case anymore at the end of init.
We are not changing the size of TLBCAMs, only flags, so no need to
switch to AS1.
So change loadcam_multi() to not switch to AS1 when the given
temporary tlb entry in 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9d517fbfbc940f56103c46b323f6eb8f4485571.1634292136.git.christophe.leroy@csgroup.eu
Don't force MAS3_SX and MAS3_UX at all time. Take into account the
exec flag.
While at it, fix a couple of closeby style problems (indent with space
and unnecessary parenthesis), it keeps more readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5467044e59f27f9fcf709b9661779e3ce5f784f6.1634292136.git.christophe.leroy@csgroup.eu
We have a myriad of CONFIG symbols around different variants
of BOOKEs, which would be worth tidying up one day.
But at least, make file names and CONFIG option match:
We have CONFIG_FSL_BOOKE and CONFIG_PPC_FSL_BOOK3E.
fsl_booke.c is selected by and only by CONFIG_PPC_FSL_BOOK3E.
So rename it fsl_book3e to reduce confusion.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5dc871db1f67739319bec11f049ca450da1c13a2.1634292136.git.christophe.leroy@csgroup.eu
fsl_booke and 44x are not able to map kernel linear memory with
pages, so they can't support DEBUG_PAGEALLOC and KFENCE, and
STRICT_KERNEL_RWX is also a problem for now.
Enable those only on book3s (both 32 and 64 except KFENCE), 8xx and 40x.
Fixes: 88df6e90fa ("[POWERPC] DEBUG_PAGEALLOC for 32-bit")
Fixes: 95902e6c88 ("powerpc/mm: Implement STRICT_KERNEL_RWX on PPC32")
Fixes: 90cbac0e99 ("powerpc: Enable KFENCE for PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1ad9fdd9b27da3fdfa16510bb542ed51fa6e134.1634292136.git.christophe.leroy@csgroup.eu
Fix following coccicheck warning:
./arch/powerpc/kexec/file_load_64.c:698:1-22: WARNING: Function
for_each_node_by_type should have of_node_put() before goto
Early exits from for_each_node_by_type should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211018015418.10182-1-wanjiabing@vivo.com
Fix following coccicheck warning:
./arch/powerpc/platforms/pseries/iommu.c:924:1-28: WARNING: Function
for_each_node_with_property should have of_node_put() before break
Early exits from for_each_node_with_property should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211014075624.16344-1-wanjiabing@vivo.com
The page_alloc.c code will call into __kernel_map_pages() when
DEBUG_PAGEALLOC is configured and enabled.
As the implementation assumes hash, this should crash spectacularly if
not for a bit of luck in __kernel_map_pages(). In this function
linear_map_hash_count is always zero, the for loop exits without doing
any damage.
There are no other platforms that determine if they support
debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to
do that, this change turns the map/unmap into a noop when in radix
mode and prints a warning once.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Reformat if per Christophe's suggestion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au
Fix a bug exposed by a previous fix, where running guests with certain SMT topologies
could crash the host on Power8.
Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled.
Thanks to: Nathan Lynch, Srikar Dronamraju, Valentin Schneider.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmFxTaUTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgFj/D/9J/rz1zYKxvPd+o5WsJBWrgsVBxgGr
cIhtKARlh0Yoa9fhIYF6ir4HUT2TOhokwJJco7fcND73rfrHfbWshWEzwaR1Lz/2
WXr0Np509GQw1KCC9nv5DoE5qqLLL+rS+ul75Khkoi99wa/TDD8kQ5o3zUWtDoad
D6paUIOf+DjnzzD7hIuTljfuOL/P3S4OyarQEopD69n8IgCTCrSsKdzOzAvlKcuL
c3OoGAY5gasHowfxLfOigkCYloT4gJES7Kxl92QnPByOJUfqhjfKxiN4l0ydR6Bl
4dUFUp/PkvvmTZiIA3tFzu0fHOgjUCvICyEAewLX7Bh9fXAVYMRc1a2l4LrCWD8T
hQqQFskxa/viG7Uq2N58Rts9GtF5nG5d6+4l5Ndxus2+tUledjiuzOv3nsSq64TF
y+Gws66a+A8a7DjcHo281BWzWn3XCIuug4A0doyvJFNdiy/+zj3ojfUhppZam8ca
DYo7ot71l0XGvFM0Yhr/NQ9MEdpgT19VC0xU2pafnkp6yGUqjH1b9xelvg+uMZEc
vXb7h+XV0eY4Rdr+3wTnXIwIWnEslJ23YQxFvhZeWeF321wsR5kbBGvNf/aY6xQB
rLkNX63RdpyYjHGcn3qwcYTkk8wAjCR719tFal8hRMLw+CCjzqcinb7P5FLi4hQv
cUV/vDffiwyReg==
=572c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug exposed by a previous fix, where running guests with
certain SMT topologies could crash the host on Power8.
- Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is
enabled.
Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider.
* tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/smp: do not decrement idle task preempt count in CPU offline
powerpc/idle: Don't corrupt back chain when going idle
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" [1] for these cases. The
older style of one-element or zero-length arrays should no longer be
used[2].
Also, make use of the struct_size() helper in kzalloc().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Replace open coded parsing of CPU nodes' 'reg' property with
of_get_cpu_hwid().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006164332.1981454-8-robh@kernel.org
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:
BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
dump_stack_lvl+0xac/0x108
__schedule_bug+0xac/0xe0
__schedule+0xcf8/0x10d0
schedule_idle+0x3c/0x70
do_idle+0x2d8/0x4a0
cpu_startup_entry+0x38/0x40
start_secondary+0x2ec/0x3a0
start_secondary_prolog+0x10/0x14
This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."
However, since commit 2c669ef697 ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.
The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.
Tested with pseries and powernv in qemu, and pseries on PowerVM.
Fixes: 2c669ef697 ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
In isa206_idle_insn_mayloss() we store various registers into the stack
red zone, which is allowed.
However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again,
to 0(r1), which corrupts the stack back chain.
We used to do the same in isa206_idle_insn_mayloss() itself, but we
fixed that in 73287caa92 ("powerpc64/idle: Fix SP offsets when saving
GPRs"), however we missed that the macro also corrupts the back chain.
Corrupting the back chain is bad for debuggability but doesn't
necessarily cause a bug.
However we recently changed the stack handling in some KVM code, and it
now relies on the stack back chain being valid when it returns. The
corruption causes that code to return with r1 pointing somewhere in
kernel data, at some point LR is restored from the stack and we branch
to NULL or somewhere else invalid.
Only affects Power8 hosts running KVM guests, with dynamic_mt_modes
enabled (which it is by default).
The fixes tag below points to the commit that changed the KVM stack
handling, exposing this bug. The actual corruption of the back chain has
always existed since 948cf67c47 ("powerpc: Add NAP mode support on
Power7 in HV mode").
Fixes: 9b4416c509 ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
Fix the data source encodings to represent L2.1/L3.1(another core's
L2/L3 on the same node) accesses properly for power10 and older
plaforms.
Add new macros(LEVEL/REM) which can be used to add mem_lvl_num and remote
field data inside perf_mem_data_src structure.
Result in power9 system with patch changes:
localhost:~/linux/tools/perf # ./perf mem report | grep Remote
0.01% 1 252 Remote core, same node L3 or L3 hit [.] 0x0000000000002dd0 producer_consumer [.] 0x00007fff7f25eb90
anon HitM N/A No N/A 0 0
0.01% 1 220 Remote core, same node L3 or L3 hit [.] 0x0000000000002dd0 producer_consumer [.] 0x00007fff77776d90
anon HitM N/A No N/A 0 0
0.01% 1 220 Remote core, same node L3 or L3 hit [.] 0x0000000000002dd0 producer_consumer [.] 0x00007fff817d9410
anon HitM N/A No N/A 0 0
Fixes: 79e96f8f93 ("powerpc/perf: Export memory hierarchy info to user space")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-5-kjain@linux.ibm.com
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
There is no need to pull blk-cgroup.h and thus blkdev.h in here, so
break the include chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a bug where guests on P9 with interrupts passed through could get stuck in
synchronize_irq().
Fix a bug in KVM on P8 where secondary threads entering a guest would write outside their
allocated stack.
Fix a bug in KVM on P8 where secondary threads could confuse the host offline code and
cause the guest or host to crash.
Thanks to: Cédric Le Goater
-----BEGIN PGP SIGNATURE-----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=fPMr
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where guests on P9 with interrupts passed through could get
stuck in synchronize_irq().
- Fix a bug in KVM on P8 where secondary threads entering a guest would
write outside their allocated stack.
- Fix a bug in KVM on P8 where secondary threads could confuse the host
offline code and cause the guest or host to crash.
Thanks to Cédric Le Goater.
* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
