3fbaf25817
9486 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Qu Wenruo
|
265d4ac03f |
btrfs: sink parameter start and len to check_data_csum
For check_data_csum(), the page we're using is directly from the inode mapping, thus it has valid page_offset(). We can use (page_offset() + pg_off) to replace @start parameter completely, while the @len should always be sectorsize. Since we're here, also add some comment, as there are quite some confusion in words like start/offset, without explaining whether it's file_offset or logical bytenr. This should not affect the existing behavior, as for current sectorsize == PAGE_SIZE case, @pgoff should always be 0, and len is always PAGE_SIZE (or sectorsize from the dio read path). Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
8896a08d8e |
btrfs: replace fs_info and private_data with inode in btrfs_wq_submit_bio
All callers of btrfs_wq_submit_bio() pass struct inode as @private_data, so there is no need for it to be (void *), replace it with "struct inode *inode". While we can extract fs_info from struct inode, also remove the @fs_info parameter. Since we're here, also replace all the (void *private_data) into (struct inode *inode). Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
3f6bb4aeb5 |
btrfs: sink the failed_start parameter to set_extent_bit
The @failed_start parameter is only paired with @exclusive_bits, and those parameters are only used for EXTENT_LOCKED bit, which have their own wrappers lock_extent_bits(). Thus for regular set_extent_bit() calls, the failed_start makes no sense, just sink the parameter. Also, since @failed_start and @exclusive_bits are used in pairs, add an assert to make it obvious. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
03509b781a |
btrfs: update the comment for find_first_extent_bit
The pitfall here is, if the parameter @bits has multiple bits set, we will return the first range which just has one of the specified bits set. This is a little tricky if we want an exact match. Anyway, update the comment to make that clear. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
a3efb2f0ba |
btrfs: fix the comment on lock_extent_buffer_for_io
The return value of that function is completely wrong.
That function only returns 0 if the extent buffer doesn't need to be
submitted. The "ret = 1" and "ret = 0" are determined by the return
value of "test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)".
And if we get ret == 1, it's because the extent buffer is dirty, and we
set its status to EXTENT_BUFFER_WRITE_BACK, and continue to page
locking.
While if we get ret == 0, it means the extent is not dirty from the
beginning, so we don't need to write it back.
The caller also follows this, in btree_write_cache_pages(), if
lock_extent_buffer_for_io() returns 0, we just skip the extent buffer
completely.
So the comment is completely wrong.
Since we're here, also change the description a little. The write bio
flushing won't be visible to the caller, thus it's not an major feature.
In the main description, only describe the locking part to make the
point more clear.
For reference, added in commit
|
||
David Sterba
|
cc7c77146e |
btrfs: remove unnecessary casts in printk
Long time ago the explicit casts were necessary for u64 but we don't need it. Remove casts where the type matches, leaving only cases that cast sector_t or loff_t. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
c842268458 |
btrfs: add set/get accessors for root_item::drop_level
The drop_level member is used directly unlike all the other int types in root_item. Add the definition and use it everywhere. The type is u8 so there's no conversion necessary and the helpers are properly inlined, this is for consistency. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
f944d2cb20 |
btrfs: use root_item helpers for limit and flags in btrfs_create_tree
For consistency use the available helpers to set flags and limit. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
3b5418fba3 |
btrfs: check-integrity: use proper helper to access btrfs_header
There's one raw use of le->cpu conversion but we have a helper to do that for us, so use it. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
09e3a28892 |
btrfs: send: use helpers to access root_item::ctransid
We have helpers to access the on-disk item members, use that for root_item::ctransid instead of raw le64_to_cpu. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
ab1405aa25 |
btrfs: generate lockdep keyset names at compile time
The names in btrfs_lockdep_keysets are generated from a simple pattern using snprintf but we can generate them directly with some macro magic and remove the helpers. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
387824afd7 |
btrfs: use the right number of levels for lockdep keysets
BTRFS_MAX_LEVEL is 8 and the keyset table is supposed to have a key for each level, but we'll never have more than 8 levels. The values passed to btrfs_set_buffer_lockdep_class are always derived from a valid extent buffer. Set the array sizes to the right value. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Goldwyn Rodrigues
|
ecfdc08b8c |
btrfs: remove dio iomap DSYNC workaround
This effectively reverts 09745ff88d93 ("btrfs: dio iomap DSYNC
workaround") now that the iomap API has been updated to allow
iomap_dio_complete() not to be called under i_rwsem anymore.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Goldwyn Rodrigues
|
a42fa64316 |
btrfs: call iomap_dio_complete() without inode_lock
If direct writes are called with O_DIRECT | O_DSYNC, it will result in a
deadlock because iomap_dio_rw() is called under i_rwsem which calls:
iomap_dio_complete()
generic_write_sync()
btrfs_sync_file()
btrfs_sync_file() requires i_rwsem, so call __iomap_dio_rw() with the
i_rwsem locked, and call iomap_dio_complete() after unlocking i_rwsem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Goldwyn Rodrigues
|
502756b380 |
btrfs: remove btrfs_inode::dio_sem
The inode dio_sem can be eliminated because all DIO synchronization is now performed through inode->i_rwsem that provides the same guarantees. This reduces btrfs_inode size by 40 bytes. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
e9adabb971 |
btrfs: use shared lock for direct writes within EOF
Direct writes within EOF are safe to be performed with inode shared lock to improve parallelization with other direct writes or reads because EOF is not changed and there is no race with truncate(). Direct reads are already performed under shared inode lock. This patch is precursor to removing btrfs_inode->dio_sem. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
c352370633 |
btrfs: push inode locking and unlocking into buffered/direct write
Push inode locking and unlocking closer to where we perform the I/O. For this we need to move the write checks inside the respective functions as well. pos is evaluated after generic_write_checks because O_APPEND can change iocb->ki_pos. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
a14b78ad06 |
btrfs: introduce btrfs_inode_lock()/unlock()
btrfs_inode_lock/unlock() are wrappers around inode locks, separating the type of lock and actual locking. - 0 - default, exclusive lock - BTRFS_ILOCK_SHARED - for shared locks, for possible parallel DIO - BTRFS_ILOCK_TRY - for the RWF_NOWAIT sequence The bits SHARED and TRY can be combined together. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
b8d8e1fd57 |
btrfs: introduce btrfs_write_check()
btrfs_write_check() checks write parameters in one place before beginning a write. This does away with inode_unlock() after every check. In the later patches, it will help push inode_lock/unlock() in buffered and direct write functions respectively. generic_write_checks needs to be called before as it could truncate iov_iter and its return used as count. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
c86537a42f |
btrfs: check FS error state bit early during write
fs_info::fs_state is a filesystem bit check as opposed to inode and can be performed before we begin with write checks. This eliminates inode lock/unlock in case the error bit is set. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
5e8b9ef303 |
btrfs: move pos increment and pagecache extension to btrfs_buffered_write
While we do this, correct the call to pagecache_isize_extended: - pagecache_isize_extended needs to be called to the start of the write as opposed to i_size - we don't need to check range before the call, this is done in the function Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
4e4cabece9 |
btrfs: split btrfs_direct_IO to read and write
The read and write DIO don't have anything in common except for the call to iomap_dio_rw. Extract the write call into a new function to get rid of conditional statements for direct write. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Anand Jain
|
3d8cc17a05 |
btrfs: sysfs: add per-fs attribute for read policy
Add /sys/fs/btrfs/UUID/read_policy attribute so that the read policy for the raid1, raid1c34 and raid10 can be tuned. When this attribute is read, it will show all available policies, with active policy in [ ]. The read_policy attribute can be written using one of the items listed in there. For example: $ cat /sys/fs/btrfs/UUID/read_policy [pid] $ echo pid > /sys/fs/btrfs/UUID/read_policy Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
33fd2f714c |
btrfs: create read policy framework
As of now, we use the pid method to read striped mirrored data, which means process id determines the stripe id to read. This type of routing typically helps in a system with many small independent processes tying to read random data. On the other hand, the pid based read IO policy is inefficient because if there is a single process trying to read a large file, the overall disk bandwidth remains underutilized. So this patch introduces a read policy framework so that we could add more read policies, such as IO routing based on the device's wait-queue or manual when we have a read-preferred device or a policy based on the target storage caching. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
aaefed2078 |
btrfs: add helper for string match ignoring leading/trailing whitespace
Add a generic helper to match the string in a given buffer, and ignore the leading and trailing whitespace. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ rename variables, add comments ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
Filipe Manana
|
88090ad36a |
btrfs: do not start and wait for delalloc on snapshot roots on transaction commit
We do not need anymore to start writeback for delalloc of roots that are being snapshotted and wait for it to complete. This was done in commit |
||
Josef Bacik
|
196d59ab9c |
btrfs: switch extent buffer tree lock to rw_semaphore
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Nikolay Borisov
|
ecdcf3c259 |
btrfs: open code insert_orphan_item
Just open code it in its sole caller and remove a level of indirection. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
9037d3cbcb |
btrfs: introduce mount option rescue=all
Now that we have the building blocks for some better recovery options with corrupted file systems, add a rescue=all option to enable all of the relevant rescue options. This will allow distros to simply default to rescue=all for the "oh dear lord the world's on fire" recovery without needing to know all the different options that we have and may add in the future. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
882dbe0cec |
btrfs: introduce mount option rescue=ignoredatacsums
There are cases where you can end up with bad data csums because of misbehaving applications. This happens when an application modifies a buffer in-flight when doing an O_DIRECT write. In order to recover the file we need a way to turn off data checksums so you can copy the file off, and then you can delete the file and restore it properly later. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
42437a6386 |
btrfs: introduce mount option rescue=ignorebadroots
In the face of extent root corruption, or any other core fs wide root corruption we will fail to mount the file system. This makes recovery kind of a pain, because you need to fall back to userspace tools to scrape off data. Instead provide a mechanism to gracefully handle bad roots, so we can at least mount read-only and possibly recover data from the file system. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
68319c18cb |
btrfs: show rescue=usebackuproot in /proc/mounts
The standalone option usebackuproot was intended as one-time use and it was not necessary to keep it in the option list. Now that we're going to have more rescue options, it's desirable to keep them intact as it could be confusing why the option disappears. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ remove the btrfs_clear_opt part from open_ctree ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
ab0b4a3ebf |
btrfs: add a helper to print out rescue= options
We're going to have a lot of rescue options, add a helper to collapse the /proc/mounts output to rescue=option1:option2:option3 format. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
ceafe3cc39 |
btrfs: sysfs: export supported rescue= mount options
We're going to be adding a variety of different rescue options, we should advertise which ones we support to make user spaces life easier in the future. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
334c16d82c |
btrfs: push the NODATASUM check into btrfs_lookup_bio_sums
When we move to being able to handle NULL csum_roots it'll be cleaner to just check in btrfs_lookup_bio_sums instead of at all of the caller locations, so push the NODATASUM check into it as well so it's unified. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
d70bf7484f |
btrfs: unify the ro checking for mount options
We're going to be adding more options that require RDONLY, so add a helper to do the check and error out if we don't have RDONLY set. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a6889caf6e |
btrfs: do not start readahead for csum tree when scrubbing non-data block groups
When scrubbing a stripe of a block group we always start readahead for the checksums btree and wait for it to complete, however when the blockgroup is not a data block group (or a mixed block group) it is a waste of time to do it, since there are no checksums for metadata extents in that btree. So skip that when the block group does not have the data flag set, saving some time doing memory allocations, queueing a job in the readahead work queue, waiting for it to complete and potentially avoiding some IO as well (when csum tree extents are not in memory already). Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a57ad681f1 |
btrfs: assert we are holding the reada_lock when releasing a readahead zone
When we drop the last reference of a zone, we end up releasing it through the callback reada_zone_release(), which deletes the zone from a device's reada_zones radix tree. This tree is protected by the global readahead lock at fs_info->reada_lock. Currently all places that are sure that they are dropping the last reference on a zone, are calling kref_put() in a critical section delimited by this lock, while all other places that are sure they are not dropping the last reference, do not bother calling kref_put() while holding that lock. When working on the previous fix for hangs and use-after-frees in the readahead code, my initial attempts were different and I actually ended up having reada_zone_release() called when not holding the lock, which resulted in weird and unexpected problems. So just add an assertion there to detect such problem more quickly and make the dependency more obvious. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
aa8c1a41a1 |
btrfs: set EXTENT_NORESERVE bits side btrfs_dirty_pages()
Set the extent bits EXTENT_NORESERVE inside btrfs_dirty_pages() as opposed to calling set_extent_bits again later. Fold check for written length within the function. Note: EXTENT_NORESERVE is set before unlocking extents. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
13f0dd8f78 |
btrfs: use round_down while calculating start position in btrfs_dirty_pages()
round_down looks prettier than the bit mask operations. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Goldwyn Rodrigues
|
949b32732e |
btrfs: use iosize while reading compressed pages
While using compression, a submitted bio is mapped with a compressed bio which performs the read from disk, decompresses and returns uncompressed data to original bio. The original bio must reflect the uncompressed size (iosize) of the I/O to be performed, or else the page just gets the decompressed I/O length of data (disk_io_size). The compressed bio checks the extent map and gets the correct length while performing the I/O from disk. This came up in subpage work when only compressed length of the original bio was filled in the page. This worked correctly for pagesize == sectorsize because both compressed and uncompressed data are at pagesize boundaries, and would end up filling the requested page. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Goldwyn Rodrigues
|
eefa45f593 |
btrfs: calculate num_pages, reserve_bytes once in btrfs_buffered_write
write_bytes can change in btrfs_check_nocow_lock(). Calculate variables such as num_pages and reserve_bytes once we are sure of the value of write_bytes so there is no need to re-calculate. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
fb8a7e941b |
btrfs: calculate more accurate remaining time to sleep in transaction_kthread
If transaction_kthread is woken up before btrfs_fs_info::commit_interval seconds have elapsed it will sleep for a fixed period of 5 seconds. This is not a problem per-se but is not accurate. Instead the code should sleep for an interval which guarantees on next wakeup commit_interval would have passed. Since time tracking is not precise subtract 1 second from delta to ensure the delay we end up waiting will be longer than than the wake up period. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
643900bee4 |
btrfs: record delta directly in transaction_kthread
Rename 'now' to 'delta' and store there the delta between transaction start time and current time. This is in preparation for optimising the sleep logic in the next patch. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
e4e4288161 |
btrfs: remove redundant time check in transaction kthread loop
The value obtained from ktime_get_seconds() is guaranteed to be monotonically increasing since it's taken from CLOCK_MONOTONIC. As transaction_kthread obtains a reference to the currently running transaction under holding btrfs_fs_info::trans_lock it's guaranteed to: a) see an initialized 'cur', whose start_time is guaranteed to be smaller than 'now' or b) not obtain a 'cur' and simply go to sleep. Given this remove the unnecessary check, if it sees now < cur->start_time this would imply there are far greater problems on the machine. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
ba1bc00f35 |
btrfs: use helpers to convert from seconds to jiffies in transaction_kthread
The kernel provides easy to understand helpers to convert from human understandable units to the kernel-friendly 'jiffies'. So let's use those to make the code easier to understand. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
089c8b0551 |
btrfs: sysfs: export filesystem generation
Matching with the information that's available from the ioctl FS_INFO, add generation to the per-filesystem directory /sys/fs/btrfs/UUID/generation, which could be used by scripts. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Linus Torvalds
|
a17a3ca55e |
for-5.10-rc5-tag
-----BEGIN PGP SIGNATURE-----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=kcxn
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few fixes for various warnings that accumulated over past two weeks:
- tree-checker: add missing return values for some errors
- lockdep fixes
- when reading qgroup config and starting quota rescan
- reverse order of quota ioctl lock and VFS freeze lock
- avoid accessing potentially stale fs info during device scan,
reported by syzbot
- add scope NOFS protection around qgroup relation changes
- check for running transaction before flushing qgroups
- fix tracking of new delalloc ranges for some cases"
* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep splat when enabling and disabling qgroups
btrfs: do nofs allocations when adding and removing qgroup relations
btrfs: fix lockdep splat when reading qgroup config on mount
btrfs: tree-checker: add missing returns after data_ref alignment checks
btrfs: don't access possibly stale fs_info data for printing duplicate device
btrfs: tree-checker: add missing return after error in root_item
btrfs: qgroup: don't commit transaction when we already hold the handle
btrfs: fix missing delalloc new bit for new delalloc ranges
|
||
|
Filipe Manana
|
a855fbe692 |
btrfs: fix lockdep splat when enabling and disabling qgroups
When running test case btrfs/017 from fstests, lockdep reported the following splat: [ 1297.067385] ====================================================== [ 1297.067708] WARNING: possible circular locking dependency detected [ 1297.068022] 5.10.0-rc4-btrfs-next-73 #1 Not tainted [ 1297.068322] ------------------------------------------------------ [ 1297.068629] btrfs/189080 is trying to acquire lock: [ 1297.068929] ffff9f2725731690 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.069274] but task is already holding lock: [ 1297.069868] ffff9f2702b61a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0xa70 [btrfs] [ 1297.070219] which lock already depends on the new lock. [ 1297.071131] the existing dependency chain (in reverse order) is: [ 1297.071721] -> #1 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}: [ 1297.072375] lock_acquire+0xd8/0x490 [ 1297.072710] __mutex_lock+0xa3/0xb30 [ 1297.073061] btrfs_qgroup_inherit+0x59/0x6a0 [btrfs] [ 1297.073421] create_subvol+0x194/0x990 [btrfs] [ 1297.073780] btrfs_mksubvol+0x3fb/0x4a0 [btrfs] [ 1297.074133] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs] [ 1297.074498] btrfs_ioctl_snap_create+0x58/0x80 [btrfs] [ 1297.074872] btrfs_ioctl+0x1a90/0x36f0 [btrfs] [ 1297.075245] __x64_sys_ioctl+0x83/0xb0 [ 1297.075617] do_syscall_64+0x33/0x80 [ 1297.075993] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1297.076380] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 1297.077166] check_prev_add+0x91/0xc60 [ 1297.077572] __lock_acquire+0x1740/0x3110 [ 1297.077984] lock_acquire+0xd8/0x490 [ 1297.078411] start_transaction+0x3c5/0x760 [btrfs] [ 1297.078853] btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.079323] btrfs_ioctl+0x2c60/0x36f0 [btrfs] [ 1297.079789] __x64_sys_ioctl+0x83/0xb0 [ 1297.080232] do_syscall_64+0x33/0x80 [ 1297.080680] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1297.081139] other info that might help us debug this: [ 1297.082536] Possible unsafe locking scenario: [ 1297.083510] CPU0 CPU1 [ 1297.084005] ---- ---- [ 1297.084500] lock(&fs_info->qgroup_ioctl_lock); [ 1297.084994] lock(sb_internal#2); [ 1297.085485] lock(&fs_info->qgroup_ioctl_lock); [ 1297.085974] lock(sb_internal#2); [ 1297.086454] *** DEADLOCK *** [ 1297.087880] 3 locks held by btrfs/189080: [ 1297.088324] #0: ffff9f2725731470 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0xa73/0x36f0 [btrfs] [ 1297.088799] #1: ffff9f2702b60cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1f4d/0x36f0 [btrfs] [ 1297.089284] #2: ffff9f2702b61a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0xa70 [btrfs] [ 1297.089771] stack backtrace: [ 1297.090662] CPU: 5 PID: 189080 Comm: btrfs Not tainted 5.10.0-rc4-btrfs-next-73 #1 [ 1297.091132] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1297.092123] Call Trace: [ 1297.092629] dump_stack+0x8d/0xb5 [ 1297.093115] check_noncircular+0xff/0x110 [ 1297.093596] check_prev_add+0x91/0xc60 [ 1297.094076] ? kvm_clock_read+0x14/0x30 [ 1297.094553] ? kvm_sched_clock_read+0x5/0x10 [ 1297.095029] __lock_acquire+0x1740/0x3110 [ 1297.095510] lock_acquire+0xd8/0x490 [ 1297.095993] ? btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.096476] start_transaction+0x3c5/0x760 [btrfs] [ 1297.096962] ? btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.097451] btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.097941] ? btrfs_ioctl+0x1f4d/0x36f0 [btrfs] [ 1297.098429] btrfs_ioctl+0x2c60/0x36f0 [btrfs] [ 1297.098904] ? do_user_addr_fault+0x20c/0x430 [ 1297.099382] ? kvm_clock_read+0x14/0x30 [ 1297.099854] ? kvm_sched_clock_read+0x5/0x10 [ 1297.100328] ? sched_clock+0x5/0x10 [ 1297.100801] ? sched_clock_cpu+0x12/0x180 [ 1297.101272] ? __x64_sys_ioctl+0x83/0xb0 [ 1297.101739] __x64_sys_ioctl+0x83/0xb0 [ 1297.102207] do_syscall_64+0x33/0x80 [ 1297.102673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1297.103148] RIP: 0033:0x7f773ff65d87 This is because during the quota enable ioctl we lock first the mutex qgroup_ioctl_lock and then start a transaction, and starting a transaction acquires a fs freeze semaphore (at the VFS level). However, every other code path, except for the quota disable ioctl path, we do the opposite: we start a transaction and then lock the mutex. So fix this by making the quota enable and disable paths to start the transaction without having the mutex locked, and then, after starting the transaction, lock the mutex and check if some other task already enabled or disabled the quotas, bailing with success if that was the case. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
7aa6d35984 |
btrfs: do nofs allocations when adding and removing qgroup relations
When adding or removing a qgroup relation we are doing a GFP_KERNEL allocation which is not safe because we are holding a transaction handle open and that can make us deadlock if the allocator needs to recurse into the filesystem. So just surround those calls with a nofs context. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
3d05cad3c3 |
btrfs: fix lockdep splat when reading qgroup config on mount
Lockdep reported the following splat when running test btrfs/190 from fstests: [ 9482.126098] ====================================================== [ 9482.126184] WARNING: possible circular locking dependency detected [ 9482.126281] 5.10.0-rc4-btrfs-next-73 #1 Not tainted [ 9482.126365] ------------------------------------------------------ [ 9482.126456] mount/24187 is trying to acquire lock: [ 9482.126534] ffffa0c869a7dac0 (&fs_info->qgroup_rescan_lock){+.+.}-{3:3}, at: qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.126647] but task is already holding lock: [ 9482.126777] ffffa0c892ebd3a0 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x120 [btrfs] [ 9482.126886] which lock already depends on the new lock. [ 9482.127078] the existing dependency chain (in reverse order) is: [ 9482.127213] -> #1 (btrfs-quota-00){++++}-{3:3}: [ 9482.127366] lock_acquire+0xd8/0x490 [ 9482.127436] down_read_nested+0x45/0x220 [ 9482.127528] __btrfs_tree_read_lock+0x27/0x120 [btrfs] [ 9482.127613] btrfs_read_lock_root_node+0x41/0x130 [btrfs] [ 9482.127702] btrfs_search_slot+0x514/0xc30 [btrfs] [ 9482.127788] update_qgroup_status_item+0x72/0x140 [btrfs] [ 9482.127877] btrfs_qgroup_rescan_worker+0xde/0x680 [btrfs] [ 9482.127964] btrfs_work_helper+0xf1/0x600 [btrfs] [ 9482.128039] process_one_work+0x24e/0x5e0 [ 9482.128110] worker_thread+0x50/0x3b0 [ 9482.128181] kthread+0x153/0x170 [ 9482.128256] ret_from_fork+0x22/0x30 [ 9482.128327] -> #0 (&fs_info->qgroup_rescan_lock){+.+.}-{3:3}: [ 9482.128464] check_prev_add+0x91/0xc60 [ 9482.128551] __lock_acquire+0x1740/0x3110 [ 9482.128623] lock_acquire+0xd8/0x490 [ 9482.130029] __mutex_lock+0xa3/0xb30 [ 9482.130590] qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.131577] btrfs_read_qgroup_config+0x43a/0x550 [btrfs] [ 9482.132175] open_ctree+0x1228/0x18a0 [btrfs] [ 9482.132756] btrfs_mount_root.cold+0x13/0xed [btrfs] [ 9482.133325] legacy_get_tree+0x30/0x60 [ 9482.133866] vfs_get_tree+0x28/0xe0 [ 9482.134392] fc_mount+0xe/0x40 [ 9482.134908] vfs_kern_mount.part.0+0x71/0x90 [ 9482.135428] btrfs_mount+0x13b/0x3e0 [btrfs] [ 9482.135942] legacy_get_tree+0x30/0x60 [ 9482.136444] vfs_get_tree+0x28/0xe0 [ 9482.136949] path_mount+0x2d7/0xa70 [ 9482.137438] do_mount+0x75/0x90 [ 9482.137923] __x64_sys_mount+0x8e/0xd0 [ 9482.138400] do_syscall_64+0x33/0x80 [ 9482.138873] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 9482.139346] other info that might help us debug this: [ 9482.140735] Possible unsafe locking scenario: [ 9482.141594] CPU0 CPU1 [ 9482.142011] ---- ---- [ 9482.142411] lock(btrfs-quota-00); [ 9482.142806] lock(&fs_info->qgroup_rescan_lock); [ 9482.143216] lock(btrfs-quota-00); [ 9482.143629] lock(&fs_info->qgroup_rescan_lock); [ 9482.144056] *** DEADLOCK *** [ 9482.145242] 2 locks held by mount/24187: [ 9482.145637] #0: ffffa0c8411c40e8 (&type->s_umount_key#44/1){+.+.}-{3:3}, at: alloc_super+0xb9/0x400 [ 9482.146061] #1: ffffa0c892ebd3a0 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x120 [btrfs] [ 9482.146509] stack backtrace: [ 9482.147350] CPU: 1 PID: 24187 Comm: mount Not tainted 5.10.0-rc4-btrfs-next-73 #1 [ 9482.147788] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 9482.148709] Call Trace: [ 9482.149169] dump_stack+0x8d/0xb5 [ 9482.149628] check_noncircular+0xff/0x110 [ 9482.150090] check_prev_add+0x91/0xc60 [ 9482.150561] ? kvm_clock_read+0x14/0x30 [ 9482.151017] ? kvm_sched_clock_read+0x5/0x10 [ 9482.151470] __lock_acquire+0x1740/0x3110 [ 9482.151941] ? __btrfs_tree_read_lock+0x27/0x120 [btrfs] [ 9482.152402] lock_acquire+0xd8/0x490 [ 9482.152887] ? qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.153354] __mutex_lock+0xa3/0xb30 [ 9482.153826] ? qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.154301] ? qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.154768] ? qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.155226] qgroup_rescan_init+0x43/0xf0 [btrfs] [ 9482.155690] btrfs_read_qgroup_config+0x43a/0x550 [btrfs] [ 9482.156160] open_ctree+0x1228/0x18a0 [btrfs] [ 9482.156643] btrfs_mount_root.cold+0x13/0xed [btrfs] [ 9482.157108] ? rcu_read_lock_sched_held+0x5d/0x90 [ 9482.157567] ? kfree+0x31f/0x3e0 [ 9482.158030] legacy_get_tree+0x30/0x60 [ 9482.158489] vfs_get_tree+0x28/0xe0 [ 9482.158947] fc_mount+0xe/0x40 [ 9482.159403] vfs_kern_mount.part.0+0x71/0x90 [ 9482.159875] btrfs_mount+0x13b/0x3e0 [btrfs] [ 9482.160335] ? rcu_read_lock_sched_held+0x5d/0x90 [ 9482.160805] ? kfree+0x31f/0x3e0 [ 9482.161260] ? legacy_get_tree+0x30/0x60 [ 9482.161714] legacy_get_tree+0x30/0x60 [ 9482.162166] vfs_get_tree+0x28/0xe0 [ 9482.162616] path_mount+0x2d7/0xa70 [ 9482.163070] do_mount+0x75/0x90 [ 9482.163525] __x64_sys_mount+0x8e/0xd0 [ 9482.163986] do_syscall_64+0x33/0x80 [ 9482.164437] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 9482.164902] RIP: 0033:0x7f51e907caaa This happens because at btrfs_read_qgroup_config() we can call qgroup_rescan_init() while holding a read lock on a quota btree leaf, acquired by the previous call to btrfs_search_slot_for_read(), and qgroup_rescan_init() acquires the mutex qgroup_rescan_lock. A qgroup rescan worker does the opposite: it acquires the mutex qgroup_rescan_lock, at btrfs_qgroup_rescan_worker(), and then tries to update the qgroup status item in the quota btree through the call to update_qgroup_status_item(). This inversion of locking order between the qgroup_rescan_lock mutex and quota btree locks causes the splat. Fix this simply by releasing and freeing the path before calling qgroup_rescan_init() at btrfs_read_qgroup_config(). CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
6d06b0ad94 |
btrfs: tree-checker: add missing returns after data_ref alignment checks
There are sectorsize alignment checks that are reported but then
check_extent_data_ref continues. This was not intended, wrong alignment
is not a minor problem and we should return with error.
CC: stable@vger.kernel.org # 5.4+
Fixes:
|
||
Johannes Thumshirn
|
0697d9a610 |
btrfs: don't access possibly stale fs_info data for printing duplicate device
Syzbot reported a possible use-after-free when printing a duplicate device warning device_list_add(). At this point it can happen that a btrfs_device::fs_info is not correctly setup yet, so we're accessing stale data, when printing the warning message using the btrfs_printk() wrappers. ================================================================== BUG: KASAN: use-after-free in btrfs_printk+0x3eb/0x435 fs/btrfs/super.c:245 Read of size 8 at addr ffff8880878e06a8 by task syz-executor225/7068 CPU: 1 PID: 7068 Comm: syz-executor225 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 btrfs_printk+0x3eb/0x435 fs/btrfs/super.c:245 device_list_add+0x1a88/0x1d60 fs/btrfs/volumes.c:943 btrfs_scan_one_device+0x196/0x490 fs/btrfs/volumes.c:1359 btrfs_mount_root+0x48f/0xb60 fs/btrfs/super.c:1634 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x88/0x270 fs/super.c:1547 fc_mount fs/namespace.c:978 [inline] vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008 btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x88/0x270 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x179d/0x29e0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount+0x126/0x180 fs/namespace.c:3390 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x44840a RSP: 002b:00007ffedfffd608 EFLAGS: 00000293 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007ffedfffd670 RCX: 000000000044840a RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffedfffd630 RBP: 00007ffedfffd630 R08: 00007ffedfffd670 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000001a R13: 0000000000000004 R14: 0000000000000003 R15: 0000000000000003 Allocated by task 6945: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 kmalloc_node include/linux/slab.h:577 [inline] kvmalloc_node+0x81/0x110 mm/util.c:574 kvmalloc include/linux/mm.h:757 [inline] kvzalloc include/linux/mm.h:765 [inline] btrfs_mount_root+0xd0/0xb60 fs/btrfs/super.c:1613 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x88/0x270 fs/super.c:1547 fc_mount fs/namespace.c:978 [inline] vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008 btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x88/0x270 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x179d/0x29e0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount+0x126/0x180 fs/namespace.c:3390 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6945: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kfree+0x113/0x200 mm/slab.c:3756 deactivate_locked_super+0xa7/0xf0 fs/super.c:335 btrfs_mount_root+0x72b/0xb60 fs/btrfs/super.c:1678 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x88/0x270 fs/super.c:1547 fc_mount fs/namespace.c:978 [inline] vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008 btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x88/0x270 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x179d/0x29e0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount+0x126/0x180 fs/namespace.c:3390 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880878e0000 which belongs to the cache kmalloc-16k of size 16384 The buggy address is located 1704 bytes inside of 16384-byte region [ffff8880878e0000, ffff8880878e4000) The buggy address belongs to the page: page:0000000060704f30 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x878e0 head:0000000060704f30 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfffe0000010200(slab|head) raw: 00fffe0000010200 ffffea00028e9a08 ffffea00021e3608 ffff8880aa440b00 raw: 0000000000000000 ffff8880878e0000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880878e0580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880878e0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880878e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880878e0700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880878e0780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The syzkaller reproducer for this use-after-free crafts a filesystem image and loop mounts it twice in a loop. The mount will fail as the crafted image has an invalid chunk tree. When this happens btrfs_mount_root() will call deactivate_locked_super(), which then cleans up fs_info and fs_info::sb. If a second thread now adds the same block-device to the filesystem, it will get detected as a duplicate device and device_list_add() will reject the duplicate and print a warning. But as the fs_info pointer passed in is non-NULL this will result in a use-after-free. Instead of printing possibly uninitialized or already freed memory in btrfs_printk(), explicitly pass in a NULL fs_info so the printing of the device name will be skipped altogether. There was a slightly different approach discussed in https://lore.kernel.org/linux-btrfs/20200114060920.4527-1-anand.jain@oracle.com/t/#u Link: https://lore.kernel.org/linux-btrfs/000000000000c9e14b05afcc41ba@google.com Reported-by: syzbot+582e66e5edf36a22c7b0@syzkaller.appspotmail.com CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Daniel Xu
|
1a49a97df6 |
btrfs: tree-checker: add missing return after error in root_item
There's a missing return statement after an error is found in the
root_item, this can cause further problems when a crafted image triggers
the error.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210181
Fixes:
|
||
|
Qu Wenruo
|
6f23277a49 |
btrfs: qgroup: don't commit transaction when we already hold the handle
[BUG]
When running the following script, btrfs will trigger an ASSERT():
#/bin/bash
mkfs.btrfs -f $dev
mount $dev $mnt
xfs_io -f -c "pwrite 0 1G" $mnt/file
sync
btrfs quota enable $mnt
btrfs quota rescan -w $mnt
# Manually set the limit below current usage
btrfs qgroup limit 512M $mnt $mnt
# Crash happens
touch $mnt/file
The dmesg looks like this:
assertion failed: refcount_read(&trans->use_count) == 1, in fs/btrfs/transaction.c:2022
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3230!
invalid opcode: 0000 [#1] SMP PTI
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
btrfs_commit_transaction.cold+0x11/0x5d [btrfs]
try_flush_qgroup+0x67/0x100 [btrfs]
__btrfs_qgroup_reserve_meta+0x3a/0x60 [btrfs]
btrfs_delayed_update_inode+0xaa/0x350 [btrfs]
btrfs_update_inode+0x9d/0x110 [btrfs]
btrfs_dirty_inode+0x5d/0xd0 [btrfs]
touch_atime+0xb5/0x100
iterate_dir+0xf1/0x1b0
__x64_sys_getdents64+0x78/0x110
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb5afe588db
[CAUSE]
In try_flush_qgroup(), we assume we don't hold a transaction handle at
all. This is true for data reservation and mostly true for metadata.
Since data space reservation always happens before we start a
transaction, and for most metadata operation we reserve space in
start_transaction().
But there is an exception, btrfs_delayed_inode_reserve_metadata().
It holds a transaction handle, while still trying to reserve extra
metadata space.
When we hit EDQUOT inside btrfs_delayed_inode_reserve_metadata(), we
will join current transaction and commit, while we still have
transaction handle from qgroup code.
[FIX]
Let's check current->journal before we join the transaction.
If current->journal is unset or BTRFS_SEND_TRANS_STUB, it means
we are not holding a transaction, thus are able to join and then commit
transaction.
If current->journal is a valid transaction handle, we avoid committing
transaction and just end it
This is less effective than committing current transaction, as it won't
free metadata reserved space, but we may still free some data space
before new data writes.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1178634
Fixes:
|
||
|
Filipe Manana
|
c334730988 |
btrfs: fix missing delalloc new bit for new delalloc ranges
When doing a buffered write, through one of the write family syscalls, we look for ranges which currently don't have allocated extents and set the 'delalloc new' bit on them, so that we can report a correct number of used blocks to the stat(2) syscall until delalloc is flushed and ordered extents complete. However there are a few other places where we can do a buffered write against a range that is mapped to a hole (no extent allocated) and where we do not set the 'new delalloc' bit. Those places are: - Doing a memory mapped write against a hole; - Cloning an inline extent into a hole starting at file offset 0; - Calling btrfs_cont_expand() when the i_size of the file is not aligned to the sector size and is located in a hole. For example when cloning to a destination offset beyond EOF. So after such cases, until the corresponding delalloc range is flushed and the respective ordered extents complete, we can report an incorrect number of blocks used through the stat(2) syscall. In some cases we can end up reporting 0 used blocks to stat(2), which is a particular bad value to report as it may mislead tools to think a file is completely sparse when its i_size is not zero, making them skip reading any data, an undesired consequence for tools such as archivers and other backup tools, as reported a long time ago in the following thread (and other past threads): https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html Example reproducer: $ cat reproducer.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f $DEV > /dev/null # mkfs.ext4 -F $DEV > /dev/null # mkfs.f2fs -f $DEV > /dev/null mount $DEV $MNT xfs_io -f -c "truncate 64K" \ -c "mmap -w 0 64K" \ -c "mwrite -S 0xab 0 64K" \ -c "munmap" \ $MNT/foo blocks_used=$(stat -c %b $MNT/foo) echo "blocks used: $blocks_used" if [ $blocks_used -eq 0 ]; then echo "ERROR: blocks used is 0" fi umount $DEV $ ./reproducer.sh blocks used: 0 ERROR: blocks used is 0 So move the logic that decides to set the 'delalloc bit' bit into the function btrfs_set_extent_delalloc(), since that is what we use for all those missing cases as well as for the cases that currently work well. This change is also preparatory work for an upcoming patch that fixes other problems related to tracking and reporting the number of bytes used by an inode. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Linus Torvalds
|
e2f0c565ec |
for-5.10-rc3-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl+qtyAACgkQxWXV+ddt WDusYg/+P1SroRe2n33Pi6v9w47Luqjfi5qMfdrV/ex7g9bP/7dVPvAa0YJr7CpA UHpvcgWMFK2e29oOoeEoYXukHQ4BKtC6F5L0MPgVJocDT6xsAWM3v98VZn69Olcu TcUNkxUVbj7OBbQDaINV8dXnTbQWNOsfNlYXH+nPgWqrjSDbPoLkXIEVfZ9CTBeZ P/qEshkTXqvx1Pux/uRcKrMSu+lSFICKlLvky0b9gRpg4usVlF8jlGQrvJHQvqnP lECR1cb7/nf2PQ+HdPpgigD24bddiiORoyGW68Q1zZHgs+kGfL6p4M3WF04WINrV Taiv7WVZ6qHiEB+LDxlOx2cy0Z6YzFOaGSASz+Hh64hvOezBOVGvCF1U9U/Dp+MC n6QjUiw6c0rIjbdoxpTfQETCdIt/l3qXfOVEr9Zjr2KEbasLsZXdGSf3ydr81Uff 94CwrXp2wq429zu4mdCfOwihF/288+VrN8XRfkSy5RFQ5hHVnZBFQO4KbRIQ4i5X ZIjHQPX0jA/XN/jpUde/RJL5AyLz20n0o9I3frjXwSs+rvU3f0wD//fxmXlRUshM hsFXFKO0VdaFtoywVIf7VK/fDsKQhiq+9Yg48A8ylpk+W7meMjeDYuYMIEhMQX3m S1OMG1Qf27pWXD6KEzpaqzI4SrYBOGVDsX8qxMxRws7n55koVJc= =3FTR -----END PGP SIGNATURE----- Merge tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A handful of minor fixes and updates: - handle missing device replace item on mount (syzbot report) - fix space reservation calculation when finishing relocation - fix memory leak on error path in ref-verify (debugging feature) - fix potential overflow during defrag on 32bit arches - minor code update to silence smatch warning - minor error message updates" * tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod btrfs: dev-replace: fail mount if we don't have replace item with target device btrfs: scrub: update message regarding read-only status btrfs: clean up NULL checks in qgroup_unreserve_range() btrfs: fix min reserved size calculation in merge_reloc_root btrfs: print the block rsv type when we fail our reservation btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch |
||
Dinghao Liu
|
468600c6ec |
btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod
There is one error handling path that does not free ref, which may cause a minor memory leak. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
cf89af146b |
btrfs: dev-replace: fail mount if we don't have replace item with target device
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
a4852cf268 |
btrfs: scrub: update message regarding read-only status
Based on user feedback update the message printed when scrub fails to start due to write requirements. To make a distinction add a device id to the messages. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Dan Carpenter
|
f07728d541 |
btrfs: clean up NULL checks in qgroup_unreserve_range()
Smatch complains that this code dereferences "entry" before checking whether it's NULL on the next line. Fortunately, rb_entry() will never return NULL so it doesn't cause a problem. We can clean up the NULL checking a bit to silence the warning and make the code more clear. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
fca3a45d08 |
btrfs: fix min reserved size calculation in merge_reloc_root
The minimum reserve size was adjusted to take into account the height of
the tree we are merging, however we can have a root with a level == 0.
What we want is root_level + 1 to get the number of nodes we may have to
cow. This fixes the enospc_debug warning pops with btrfs/101.
Nikolay: this fixes failures on btrfs/060 btrfs/062 btrfs/063 and
btrfs/195 That I was seeing, the call trace was:
[ 3680.515564] ------------[ cut here ]------------
[ 3680.515566] BTRFS: block rsv returned -28
[ 3680.515585] WARNING: CPU: 2 PID: 8339 at fs/btrfs/block-rsv.c:521 btrfs_use_block_rsv+0x162/0x180
[ 3680.515587] Modules linked in:
[ 3680.515591] CPU: 2 PID: 8339 Comm: btrfs Tainted: G W 5.9.0-rc8-default #95
[ 3680.515593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[ 3680.515595] RIP: 0010:btrfs_use_block_rsv+0x162/0x180
[ 3680.515600] RSP: 0018:ffffa01ac9753910 EFLAGS: 00010282
[ 3680.515602] RAX: 0000000000000000 RBX: ffff984b34200000 RCX: 0000000000000027
[ 3680.515604] RDX: 0000000000000027 RSI: 0000000000000000 RDI: ffff984b3bd19e28
[ 3680.515606] RBP: 0000000000004000 R08: ffff984b3bd19e20 R09: 0000000000000001
[ 3680.515608] R10: 0000000000000004 R11: 0000000000000046 R12: ffff984b264fdc00
[ 3680.515609] R13: ffff984b13149000 R14: 00000000ffffffe4 R15: ffff984b34200000
[ 3680.515613] FS: 00007f4e2912b8c0(0000) GS:ffff984b3bd00000(0000) knlGS:0000000000000000
[ 3680.515615] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3680.515617] CR2: 00007fab87122150 CR3: 0000000118e42000 CR4: 00000000000006e0
[ 3680.515620] Call Trace:
[ 3680.515627] btrfs_alloc_tree_block+0x8b/0x340
[ 3680.515633] ? __lock_acquire+0x51a/0xac0
[ 3680.515646] alloc_tree_block_no_bg_flush+0x4f/0x60
[ 3680.515651] __btrfs_cow_block+0x14e/0x7e0
[ 3680.515662] btrfs_cow_block+0x144/0x2c0
[ 3680.515670] merge_reloc_root+0x4d4/0x610
[ 3680.515675] ? btrfs_lookup_fs_root+0x78/0x90
[ 3680.515686] merge_reloc_roots+0xee/0x280
[ 3680.515695] relocate_block_group+0x2ce/0x5e0
[ 3680.515704] btrfs_relocate_block_group+0x16e/0x310
[ 3680.515711] btrfs_relocate_chunk+0x38/0xf0
[ 3680.515716] btrfs_shrink_device+0x200/0x560
[ 3680.515728] btrfs_rm_device+0x1ae/0x6a6
[ 3680.515744] ? _copy_from_user+0x6e/0xb0
[ 3680.515750] btrfs_ioctl+0x1afe/0x28c0
[ 3680.515755] ? find_held_lock+0x2b/0x80
[ 3680.515760] ? do_user_addr_fault+0x1f8/0x418
[ 3680.515773] ? __x64_sys_ioctl+0x77/0xb0
[ 3680.515775] __x64_sys_ioctl+0x77/0xb0
[ 3680.515781] do_syscall_64+0x31/0x70
[ 3680.515785] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes:
|
||
|
Josef Bacik
|
e38fdb7167 |
btrfs: print the block rsv type when we fail our reservation
To help with debugging, print the type of the block rsv when we fail to use our target block rsv in btrfs_use_block_rsv. This now produces: [ 544.672035] BTRFS: block rsv 1 returned -28 which is still cryptic without consulting the enum in block-rsv.h but I guess it's better than nothing. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add note from Nikolay ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
Matthew Wilcox (Oracle)
|
a1fbc6750e |
btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch
On 32-bit systems, this shift will overflow for files larger than 4GB as
start_index is unsigned long while the calls to btrfs_delalloc_*_space
expect u64.
CC: stable@vger.kernel.org # 4.4+
Fixes:
|
||
|
Linus Torvalds
|
f5d808567a |
for-5.10-rc1-tag
-----BEGIN PGP SIGNATURE-----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=bR/o
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- lockdep fixes:
- drop path locks before manipulating sysfs objects or qgroups
- preliminary fixes before tree locks get switched to rwsem
- use annotated seqlock
- build warning fixes (printk format)
- fix relocation vs fallocate race
- tree checker properly validates number of stripes and parity
- readahead vs device replace fixes
- iomap dio fix for unnecessary buffered io fallback
* tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: convert data_seqcount to seqcount_mutex_t
btrfs: don't fallback to buffered read if we don't need to
btrfs: add a helper to read the tree_root commit root for backref lookup
btrfs: drop the path before adding qgroup items when enabling qgroups
btrfs: fix readahead hang and use-after-free after removing a device
btrfs: fix use-after-free on readahead extent after failure to create it
btrfs: tree-checker: validate number of chunk stripes and parity
btrfs: tree-checker: fix incorrect printk format
btrfs: drop the path before adding block group sysfs files
btrfs: fix relocation failure due to race with fallocate
|
||
Davidlohr Bueso
|
d5c8238849 |
btrfs: convert data_seqcount to seqcount_mutex_t
By doing so we can associate the sequence counter to the chunk_mutex for lockdep purposes (compiled-out otherwise), the mutex is otherwise used on the write side. Also avoid explicitly disabling preemption around the write region as it will now be done automatically by the seqcount machinery based on the lock type. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Johannes Thumshirn
|
0425e7badb |
btrfs: don't fallback to buffered read if we don't need to
Since we switched to the iomap infrastructure in b5ff9f1a96e8f ("btrfs:
switch to iomap for direct IO") we're calling generic_file_buffered_read()
directly and not via generic_file_read_iter() anymore.
If the read could read everything there is no need to bother calling
generic_file_buffered_read(), like it is handled in
generic_file_read_iter().
If we call generic_file_buffered_read() in this case we can hit a
situation where we do an invalid readahead and cause this UBSAN splat
in fstest generic/091:
run fstests generic/091 at 2020-10-21 10:52:32
================================================================================
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 656 Comm: fsx Not tainted 5.9.0-rc7+ #821
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77
dump_stack+0x57/0x70 lib/dump_stack.c:118
ubsan_epilogue+0x5/0x40 lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xe9 lib/ubsan.c:395
__roundup_pow_of_two ./include/linux/log2.h:57
get_init_ra_size mm/readahead.c:318
ondemand_readahead.cold+0x16/0x2c mm/readahead.c:530
generic_file_buffered_read+0x3ac/0x840 mm/filemap.c:2199
call_read_iter ./include/linux/fs.h:1876
new_sync_read+0x102/0x180 fs/read_write.c:415
vfs_read+0x11c/0x1a0 fs/read_write.c:481
ksys_read+0x4f/0xc0 fs/read_write.c:615
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9 arch/x86/entry/entry_64.S:118
RIP: 0033:0x7fe87fee992e
RSP: 002b:00007ffe01605278 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000004f000 RCX: 00007fe87fee992e
RDX: 0000000000004000 RSI: 0000000001677000 RDI: 0000000000000003
RBP: 000000000004f000 R08: 0000000000004000 R09: 000000000004f000
R10: 0000000000053000 R11: 0000000000000246 R12: 0000000000004000
R13: 0000000000000000 R14: 000000000007a120 R15: 0000000000000000
================================================================================
BTRFS info (device nullb0): has skinny extents
BTRFS info (device nullb0): ZONED mode enabled, zone size 268435456 B
BTRFS info (device nullb0): enabling ssd optimizations
Fixes:
|
||
|
Josef Bacik
|
49d11bead7 |
btrfs: add a helper to read the tree_root commit root for backref lookup
I got the following lockdep splat with tree locks converted to rwsem patches on btrfs/104: ====================================================== WARNING: possible circular locking dependency detected 5.9.0+ #102 Not tainted ------------------------------------------------------ btrfs-cleaner/903 is trying to acquire lock: ffff8e7fab6ffe30 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x170 but task is already holding lock: ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&fs_info->commit_root_sem){++++}-{3:3}: down_read+0x40/0x130 caching_thread+0x53/0x5a0 btrfs_work_helper+0xfa/0x520 process_one_work+0x238/0x540 worker_thread+0x55/0x3c0 kthread+0x13a/0x150 ret_from_fork+0x1f/0x30 -> #2 (&caching_ctl->mutex){+.+.}-{3:3}: __mutex_lock+0x7e/0x7b0 btrfs_cache_block_group+0x1e0/0x510 find_free_extent+0xb6e/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&space_info->groups_sem){++++}-{3:3}: down_read+0x40/0x130 find_free_extent+0x2ed/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1167/0x2150 lock_acquire+0xb9/0x3d0 down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 btrfs_find_root+0x35/0x1b0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 kthread+0x13a/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: btrfs-root-00 --> &caching_ctl->mutex --> &fs_info->commit_root_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->commit_root_sem); lock(&caching_ctl->mutex); lock(&fs_info->commit_root_sem); lock(btrfs-root-00); *** DEADLOCK *** 3 locks held by btrfs-cleaner/903: #0: ffff8e7fab628838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x6e/0x140 #1: ffff8e7faadac640 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x40b/0x5c0 #2: ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 stack backtrace: CPU: 0 PID: 903 Comm: btrfs-cleaner Not tainted 5.9.0+ #102 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 __lock_acquire+0x1167/0x2150 ? __bfs+0x42/0x210 lock_acquire+0xb9/0x3d0 ? __btrfs_tree_read_lock+0x32/0x170 down_read_nested+0x43/0x130 ? __btrfs_tree_read_lock+0x32/0x170 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 ? find_held_lock+0x2b/0x80 btrfs_find_root+0x35/0x1b0 ? do_raw_spin_unlock+0x4b/0xa0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 ? btrfs_clean_one_deleted_snapshot+0x73/0x110 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 ? btrfs_alloc_root+0x50/0x50 kthread+0x13a/0x150 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 BTRFS info (device sdb): disk space caching is enabled BTRFS info (device sdb): has skinny extents This happens because qgroups does a backref lookup when we create a delayed ref. From here it may have to look up a root from an indirect ref, which does a normal lookup on the tree_root, which takes the read lock on the tree_root nodes. To fix this we need to add a variant for looking up roots that searches the commit root of the tree_root. Then when we do the backref search using the commit root we are sure to not take any locks on the tree_root nodes. This gets rid of the lockdep splat when running btrfs/104. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
5223cc60b4 |
btrfs: drop the path before adding qgroup items when enabling qgroups
When enabling qgroups we walk the tree_root and then add a qgroup item for every root that we have. This creates a lock dependency on the tree_root and qgroup_root, which results in the following lockdep splat (with tree locks using rwsem), eg. in tests btrfs/017 or btrfs/022: ====================================================== WARNING: possible circular locking dependency detected 5.9.0-default+ #1299 Not tainted ------------------------------------------------------ btrfs/24552 is trying to acquire lock: ffff9142dfc5f630 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] but task is already holding lock: ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x3fb/0x730 lock_acquire.part.0+0x6a/0x130 down_read_nested+0x46/0x130 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot_get_root+0x11d/0x290 [btrfs] btrfs_search_slot+0xc3/0x9f0 [btrfs] btrfs_insert_item+0x6e/0x140 [btrfs] btrfs_create_tree+0x1cb/0x240 [btrfs] btrfs_quota_enable+0xcd/0x790 [btrfs] btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs] __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-quota-00){++++}-{3:3}: check_prev_add+0x91/0xc30 validate_chain+0x491/0x750 __lock_acquire+0x3fb/0x730 lock_acquire.part.0+0x6a/0x130 down_read_nested+0x46/0x130 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot_get_root+0x11d/0x290 [btrfs] btrfs_search_slot+0xc3/0x9f0 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] add_qgroup_item.part.0+0x72/0x210 [btrfs] btrfs_quota_enable+0x3bb/0x790 [btrfs] btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs] __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(btrfs-quota-00); lock(btrfs-root-00); lock(btrfs-quota-00); *** DEADLOCK *** 5 locks held by btrfs/24552: #0: ffff9142df431478 (sb_writers#10){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0xa0 #1: ffff9142f9b10cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl_quota_ctl+0x7b/0xe0 [btrfs] #2: ffff9142f9b11a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0x790 [btrfs] #3: ffff9142df431698 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x406/0x510 [btrfs] #4: ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] stack backtrace: CPU: 1 PID: 24552 Comm: btrfs Not tainted 5.9.0-default+ #1299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0x77/0x97 check_noncircular+0xf3/0x110 check_prev_add+0x91/0xc30 validate_chain+0x491/0x750 __lock_acquire+0x3fb/0x730 lock_acquire.part.0+0x6a/0x130 ? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] ? lock_acquire+0xc4/0x140 ? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] down_read_nested+0x46/0x130 ? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] ? btrfs_root_node+0xd9/0x200 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot_get_root+0x11d/0x290 [btrfs] btrfs_search_slot+0xc3/0x9f0 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] add_qgroup_item.part.0+0x72/0x210 [btrfs] btrfs_quota_enable+0x3bb/0x790 [btrfs] btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs] __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by dropping the path whenever we find a root item, add the qgroup item, and then re-lookup the root item we found and continue processing roots. Reported-by: David Sterba <dsterba@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
66d204a16c |
btrfs: fix readahead hang and use-after-free after removing a device
Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 #10 do_syscall_64+0x33/0x77 #11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
83bc1560e0 |
btrfs: fix use-after-free on readahead extent after failure to create it
If we fail to find suitable zones for a new readahead extent, we end up
leaving a stale pointer in the global readahead extents radix tree
(fs_info->reada_tree), which can trigger the following trace later on:
[13367.696354] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[13367.696802] #PF: supervisor read access in kernel mode
[13367.697249] #PF: error_code(0x0000) - not-present page
[13367.697721] PGD 0 P4D 0
[13367.698171] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[13367.698632] CPU: 6 PID: 851214 Comm: btrfs Tainted: G W 5.9.0-rc6-btrfs-next-69 #1
[13367.699100] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[13367.700069] RIP: 0010:__lock_acquire+0x20a/0x3970
[13367.700562] Code: ff 1f 0f b7 c0 48 0f (...)
[13367.701609] RSP: 0018:ffffb14448f57790 EFLAGS: 00010046
[13367.702140] RAX: 0000000000000000 RBX: 29b935140c15e8cf RCX: 0000000000000000
[13367.702698] RDX: 0000000000000002 RSI: ffffffffb3d66bd0 RDI: 0000000000000046
[13367.703240] RBP: ffff8a52ba8ac040 R08: 00000c2866ad9288 R09: 0000000000000001
[13367.703783] R10: 0000000000000001 R11: 00000000b66d9b53 R12: ffff8a52ba8ac9b0
[13367.704330] R13: 0000000000000000 R14: ffff8a532b6333e8 R15: 0000000000000000
[13367.704880] FS: 00007fe1df6b5700(0000) GS:ffff8a5376600000(0000) knlGS:0000000000000000
[13367.705438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13367.705995] CR2: 00000000000000b0 CR3: 000000022cca8004 CR4: 00000000003706e0
[13367.706565] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[13367.707127] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[13367.707686] Call Trace:
[13367.708246] ? ___slab_alloc+0x395/0x740
[13367.708820] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.709383] lock_acquire+0xb1/0x480
[13367.709955] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.710537] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.711097] ? rcu_read_lock_sched_held+0x5d/0x90
[13367.711659] ? kmem_cache_alloc_trace+0x8d2/0x990
[13367.712221] ? lock_acquired+0x33b/0x470
[13367.712784] _raw_spin_lock+0x34/0x80
[13367.713356] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.713966] reada_add_block+0xe0/0xee0 [btrfs]
[13367.714529] ? btrfs_root_node+0x15/0x1f0 [btrfs]
[13367.715077] btrfs_reada_add+0x117/0x170 [btrfs]
[13367.715620] scrub_stripe+0x21e/0x10d0 [btrfs]
[13367.716141] ? kvm_sched_clock_read+0x5/0x10
[13367.716657] ? __lock_acquire+0x41e/0x3970
[13367.717184] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.717697] ? find_held_lock+0x32/0x90
[13367.718254] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.718773] ? lock_acquired+0x33b/0x470
[13367.719278] ? scrub_chunk+0xcd/0x140 [btrfs]
[13367.719786] scrub_chunk+0xcd/0x140 [btrfs]
[13367.720291] scrub_enumerate_chunks+0x270/0x5c0 [btrfs]
[13367.720787] ? finish_wait+0x90/0x90
[13367.721281] btrfs_scrub_dev+0x1ee/0x620 [btrfs]
[13367.721762] ? rcu_read_lock_any_held+0x8e/0xb0
[13367.722235] ? preempt_count_add+0x49/0xa0
[13367.722710] ? __sb_start_write+0x19b/0x290
[13367.723192] btrfs_ioctl+0x7f5/0x36f0 [btrfs]
[13367.723660] ? __fget_files+0x101/0x1d0
[13367.724118] ? find_held_lock+0x32/0x90
[13367.724559] ? __fget_files+0x101/0x1d0
[13367.724982] ? __x64_sys_ioctl+0x83/0xb0
[13367.725399] __x64_sys_ioctl+0x83/0xb0
[13367.725802] do_syscall_64+0x33/0x80
[13367.726188] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[13367.726574] RIP: 0033:0x7fe1df7add87
[13367.726948] Code: 00 00 00 48 8b 05 09 91 (...)
[13367.727763] RSP: 002b:00007fe1df6b4d48 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[13367.728179] RAX: ffffffffffffffda RBX: 000055ce1fb596a0 RCX: 00007fe1df7add87
[13367.728604] RDX: 000055ce1fb596a0 RSI: 00000000c400941b RDI: 0000000000000003
[13367.729021] RBP: 0000000000000000 R08: 00007fe1df6b5700 R09: 0000000000000000
[13367.729431] R10: 00007fe1df6b5700 R11: 0000000000000246 R12: 00007ffd922b07de
[13367.729842] R13: 00007ffd922b07df R14: 00007fe1df6b4e40 R15: 0000000000802000
[13367.730275] Modules linked in: btrfs blake2b_generic xor (...)
[13367.732638] CR2: 00000000000000b0
[13367.733166] ---[ end trace d298b6805556acd9 ]---
What happens is the following:
1) At reada_find_extent() we don't find any existing readahead extent for
the metadata extent starting at logical address X;
2) So we proceed to create a new one. We then call btrfs_map_block() to get
information about which stripes contain extent X;
3) After that we iterate over the stripes and create only one zone for the
readahead extent - only one because reada_find_zone() returned NULL for
all iterations except for one, either because a memory allocation failed
or it couldn't find the block group of the extent (it may have just been
deleted);
4) We then add the new readahead extent to the readahead extents radix
tree at fs_info->reada_tree;
5) Then we iterate over each zone of the new readahead extent, and find
that the device used for that zone no longer exists, because it was
removed or it was the source device of a device replace operation.
Since this left 'have_zone' set to 0, after finishing the loop we jump
to the 'error' label, call kfree() on the new readahead extent and
return without removing it from the radix tree at fs_info->reada_tree;
6) Any future call to reada_find_extent() for the logical address X will
find the stale pointer in the readahead extents radix tree, increment
its reference counter, which can trigger the use-after-free right
away or return it to the caller reada_add_block() that results in the
use-after-free of the example trace above.
So fix this by making sure we delete the readahead extent from the radix
tree if we fail to setup zones for it (when 'have_zone = 0').
Fixes:
|
||
|
Daniel Xu
|
85d07fbe09 |
btrfs: tree-checker: validate number of chunk stripes and parity
If there's no parity and num_stripes < ncopies, a crafted image can trigger a division by zero in calc_stripe_length(). The image was generated through fuzzing. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209587 Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Pujin Shi
|
cad69d1396 |
btrfs: tree-checker: fix incorrect printk format
This patch addresses a compile warning:
fs/btrfs/extent-tree.c: In function '__btrfs_free_extent':
fs/btrfs/extent-tree.c:3187:4: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'unsigned int' [-Wformat=]
Fixes:
|
||
|
Josef Bacik
|
7837fa8870 |
btrfs: drop the path before adding block group sysfs files
Dave reported a problem with my rwsem conversion patch where we got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.9.0-default+ #1297 Not tainted ------------------------------------------------------ kswapd0/76 is trying to acquire lock: ffff9d5d25df2530 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] but task is already holding lock: ffffffffa40cbba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 fs_reclaim_acquire.part.0+0x25/0x30 kmem_cache_alloc+0x30/0x9c0 alloc_inode+0x81/0x90 iget_locked+0xcd/0x1a0 kernfs_get_inode+0x1b/0x130 kernfs_get_tree+0x136/0x210 sysfs_get_tree+0x1a/0x50 vfs_get_tree+0x1d/0xb0 path_mount+0x70f/0xa80 do_mount+0x75/0x90 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (kernfs_mutex){+.+.}-{3:3}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 __mutex_lock+0xa0/0xaf0 kernfs_add_one+0x23/0x150 kernfs_create_dir_ns+0x58/0x80 sysfs_create_dir_ns+0x70/0xd0 kobject_add_internal+0xbb/0x2d0 kobject_add+0x7a/0xd0 btrfs_sysfs_add_block_group_type+0x141/0x1d0 [btrfs] btrfs_read_block_groups+0x1f1/0x8c0 [btrfs] open_ctree+0x981/0x1108 [btrfs] btrfs_mount_root.cold+0xe/0xb0 [btrfs] legacy_get_tree+0x2d/0x60 vfs_get_tree+0x1d/0xb0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] legacy_get_tree+0x2d/0x60 vfs_get_tree+0x1d/0xb0 path_mount+0x70f/0xa80 do_mount+0x75/0x90 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (btrfs-extent-00){++++}-{3:3}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot+0x6d4/0xfd0 [btrfs] check_committed_ref+0x69/0x200 [btrfs] btrfs_cross_ref_exist+0x65/0xb0 [btrfs] run_delalloc_nocow+0x446/0x9b0 [btrfs] btrfs_run_delalloc_range+0x61/0x6a0 [btrfs] writepage_delalloc+0xae/0x160 [btrfs] __extent_writepage+0x262/0x420 [btrfs] extent_write_cache_pages+0x2b6/0x510 [btrfs] extent_writepages+0x43/0x90 [btrfs] do_writepages+0x40/0xe0 __writeback_single_inode+0x62/0x610 writeback_sb_inodes+0x20f/0x500 wb_writeback+0xef/0x4a0 wb_do_writeback+0x49/0x2e0 wb_workfn+0x81/0x340 process_one_work+0x233/0x5d0 worker_thread+0x50/0x3b0 kthread+0x137/0x150 ret_from_fork+0x1f/0x30 -> #1 (btrfs-fs-00){++++}-{3:3}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot+0x6d4/0xfd0 [btrfs] btrfs_lookup_inode+0x3a/0xc0 [btrfs] __btrfs_update_delayed_inode+0x93/0x2c0 [btrfs] __btrfs_commit_inode_delayed_items+0x7de/0x850 [btrfs] __btrfs_run_delayed_items+0x8e/0x140 [btrfs] btrfs_commit_transaction+0x367/0xbc0 [btrfs] btrfs_mksubvol+0x2db/0x470 [btrfs] btrfs_mksnapshot+0x7b/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] btrfs_ioctl+0xd0b/0x2690 [btrfs] __x64_sys_ioctl+0x6f/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add+0x91/0xc60 validate_chain+0xa6e/0x2a20 __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 __mutex_lock+0xa0/0xaf0 __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] btrfs_evict_inode+0x3cc/0x560 [btrfs] evict+0xd6/0x1c0 dispose_list+0x48/0x70 prune_icache_sb+0x54/0x80 super_cache_scan+0x121/0x1a0 do_shrink_slab+0x16d/0x3b0 shrink_slab+0xb1/0x2e0 shrink_node+0x230/0x6a0 balance_pgdat+0x325/0x750 kswapd+0x206/0x4d0 kthread+0x137/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: &delayed_node->mutex --> kernfs_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(kernfs_mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/76: #0: ffffffffa40cbba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffffa40b8b58 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x54/0x2e0 #2: ffff9d5d322390e8 (&type->s_umount_key#26){++++}-{3:3}, at: trylock_super+0x16/0x50 stack backtrace: CPU: 2 PID: 76 Comm: kswapd0 Not tainted 5.9.0-default+ #1297 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0x77/0x97 check_noncircular+0xff/0x110 ? save_trace+0x50/0x470 check_prev_add+0x91/0xc60 validate_chain+0xa6e/0x2a20 ? save_trace+0x50/0x470 __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] __mutex_lock+0xa0/0xaf0 ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] ? __lock_acquire+0x582/0xac0 ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] ? btrfs_evict_inode+0x30b/0x560 [btrfs] ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] btrfs_evict_inode+0x3cc/0x560 [btrfs] evict+0xd6/0x1c0 dispose_list+0x48/0x70 prune_icache_sb+0x54/0x80 super_cache_scan+0x121/0x1a0 do_shrink_slab+0x16d/0x3b0 shrink_slab+0xb1/0x2e0 shrink_node+0x230/0x6a0 balance_pgdat+0x325/0x750 kswapd+0x206/0x4d0 ? finish_wait+0x90/0x90 ? balance_pgdat+0x750/0x750 kthread+0x137/0x150 ? kthread_mod_delayed_work+0xc0/0xc0 ret_from_fork+0x1f/0x30 This happens because we are still holding the path open when we start adding the sysfs files for the block groups, which creates a dependency on fs_reclaim via the tree lock. Fix this by dropping the path before we start doing anything with sysfs. Reported-by: David Sterba <dsterba@suse.com> CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
1afc708dca |
btrfs: fix relocation failure due to race with fallocate
When doing a fallocate() we have a short time window, after reserving an extent and before starting a transaction, where if relocation for the block group containing the reserved extent happens, we can end up missing the extent in the data relocation inode causing relocation to fail later. This only happens when we don't pass a transaction to the internal fallocate function __btrfs_prealloc_file_range(), which is for all the cases where fallocate() is called from user space (the internal use cases include space cache extent allocation and relocation). When the race triggers the relocation failure, it produces a trace like the following: [200611.995995] ------------[ cut here ]------------ [200611.997084] BTRFS: Transaction aborted (error -2) [200611.998208] WARNING: CPU: 3 PID: 235845 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x3a0/0x5b0 [btrfs] [200611.999042] Modules linked in: dm_thin_pool dm_persistent_data (...) [200612.003287] CPU: 3 PID: 235845 Comm: btrfs Not tainted 5.9.0-rc6-btrfs-next-69 #1 [200612.004442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [200612.006186] RIP: 0010:__btrfs_cow_block+0x3a0/0x5b0 [btrfs] [200612.007110] Code: 1b 00 00 02 72 2a 83 f8 fb 0f 84 b8 01 (...) [200612.007341] BTRFS warning (device sdb): Skipping commit of aborted transaction. [200612.008959] RSP: 0018:ffffaee38550f918 EFLAGS: 00010286 [200612.009672] BTRFS: error (device sdb) in cleanup_transaction:1901: errno=-30 Readonly filesystem [200612.010428] RAX: 0000000000000000 RBX: ffff9174d96f4000 RCX: 0000000000000000 [200612.011078] BTRFS info (device sdb): forced readonly [200612.011862] RDX: 0000000000000001 RSI: ffffffffa8161978 RDI: 00000000ffffffff [200612.013215] RBP: ffff9172569a0f80 R08: 0000000000000000 R09: 0000000000000000 [200612.014263] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9174b8403b88 [200612.015203] R13: ffff9174b8400a88 R14: ffff9174c90f1000 R15: ffff9174a5a60e08 [200612.016182] FS: 00007fa55cf878c0(0000) GS:ffff9174ece00000(0000) knlGS:0000000000000000 [200612.017174] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [200612.018418] CR2: 00007f8fb8048148 CR3: 0000000428a46003 CR4: 00000000003706e0 [200612.019510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [200612.020648] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [200612.021520] Call Trace: [200612.022434] btrfs_cow_block+0x10b/0x250 [btrfs] [200612.023407] do_relocation+0x54e/0x7b0 [btrfs] [200612.024343] ? do_raw_spin_unlock+0x4b/0xc0 [200612.025280] ? _raw_spin_unlock+0x29/0x40 [200612.026200] relocate_tree_blocks+0x3bc/0x6d0 [btrfs] [200612.027088] relocate_block_group+0x2f3/0x600 [btrfs] [200612.027961] btrfs_relocate_block_group+0x15e/0x340 [btrfs] [200612.028896] btrfs_relocate_chunk+0x38/0x110 [btrfs] [200612.029772] btrfs_balance+0xb22/0x1790 [btrfs] [200612.030601] ? btrfs_ioctl_balance+0x253/0x380 [btrfs] [200612.031414] btrfs_ioctl_balance+0x2cf/0x380 [btrfs] [200612.032279] btrfs_ioctl+0x620/0x36f0 [btrfs] [200612.033077] ? _raw_spin_unlock+0x29/0x40 [200612.033948] ? handle_mm_fault+0x116d/0x1ca0 [200612.034749] ? up_read+0x18/0x240 [200612.035542] ? __x64_sys_ioctl+0x83/0xb0 [200612.036244] __x64_sys_ioctl+0x83/0xb0 [200612.037269] do_syscall_64+0x33/0x80 [200612.038190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [200612.038976] RIP: 0033:0x7fa55d07ed87 [200612.040127] Code: 00 00 00 48 8b 05 09 91 0c 00 64 c7 00 26 (...) [200612.041669] RSP: 002b:00007ffd5ebf03e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [200612.042437] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fa55d07ed87 [200612.043511] RDX: 00007ffd5ebf0470 RSI: 00000000c4009420 RDI: 0000000000000003 [200612.044250] RBP: 0000000000000003 R08: 000055d8362642a0 R09: 00007fa55d148be0 [200612.044963] R10: fffffffffffff52e R11: 0000000000000206 R12: 00007ffd5ebf1614 [200612.045683] R13: 00007ffd5ebf0470 R14: 0000000000000002 R15: 00007ffd5ebf0470 [200612.046361] irq event stamp: 0 [200612.047040] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [200612.047725] hardirqs last disabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0 [200612.048387] softirqs last enabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0 [200612.049024] softirqs last disabled at (0): [<0000000000000000>] 0x0 [200612.049722] ---[ end trace 49006c6876e65227 ]--- The race happens like this: 1) Task A starts an fallocate() (plain or zero range) and it calls __btrfs_prealloc_file_range() with the 'trans' parameter set to NULL; 2) Task A calls btrfs_reserve_extent() and gets an extent that belongs to block group X; 3) Before task A gets into btrfs_replace_file_extents(), through the call to insert_prealloc_file_extent(), task B starts relocation of block group X; 4) Task B enters btrfs_relocate_block_group() and it sets block group X to RO mode; 5) Task B enters relocate_block_group(), it calls prepare_to_relocate() whichs joins/starts a transaction and then commits the transaction; 6) Task B then starts scanning the extent tree looking for extents that belong to block group X - it does not find yet the extent reserved by task A, since that extent was not yet added to the extent tree, as its delayed reference was not even yet created at this point; 7) The data relocation inode ends up not having the extent reserved by task A associated to it; 8) Task A then starts a transaction through btrfs_replace_file_extents(), inserts a file extent item in the subvolume tree pointing to the reserved extent and creates a delayed reference for it; 9) Task A finishes and returns success to user space; 10) Later on, while relocation is still in progress, the leaf where task A inserted the new file extent item is COWed, so we end up at __btrfs_cow_block(), which calls btrfs_reloc_cow_block(), and that in turn calls relocation.c:replace_file_extents(); 11) At relocation.c:replace_file_extents() we iterate over all the items in the leaf and find the file extent item pointing to the extent that was allocated by task A, and then call relocation.c:get_new_location(), to find the new location for the extent; 12) However relocation.c:get_new_location() fails, returning -ENOENT, because it couldn't find a corresponding file extent item associated with the data relocation inode. This is because the extent was not seen in the extent tree at step 6). The -ENOENT error is propagated to __btrfs_cow_block(), which aborts the transaction. So fix this simply by decrementing the block group's number of reservations after calling insert_prealloc_file_extent(), as relocation waits for that counter to go down to zero before calling prepare_to_relocate() and start looking for extents in the extent tree. This issue only started to happen recently as of commit |
||
|
Linus Torvalds
|
3ad11d7ac8 |
block-5.10-2020-10-12
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+EWUgQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpnoxEADCVSNBRkpV0OVkOEC3wf8EGhXhk01Jnjtl u5Mg2V55hcgJ0thQxBV/V28XyqmsEBrmAVi0Yf8Vr9Qbq4Ze08Wae4ChS4rEOyh1 jTcGYWx5aJB3ChLvV/HI0nWQ3bkj03mMrL3SW8rhhf5DTyKHsVeTenpx42Qu/FKf fRzi09FSr3Pjd0B+EX6gunwJnlyXQC5Fa4AA0GhnXJzAznANXxHkkcXu8a6Yw75x e28CfhIBliORsK8sRHLoUnPpeTe1vtxCBhBMsE+gJAj9ZUOWMzvNFIPP4FvfawDy 6cCQo2m1azJ/IdZZCDjFUWyjh+wxdKMp+NNryEcoV+VlqIoc3n98rFwrSL+GIq5Z WVwEwq+AcwoMCsD29Lu1ytL2PQ/RVqcJP5UheMrbL4vzefNfJFumQVZLIcX0k943 8dFL2QHL+H/hM9Dx5y5rjeiWkAlq75v4xPKVjh/DHb4nehddCqn/+DD5HDhNANHf c1kmmEuYhvLpIaC4DHjE6DwLh8TPKahJjwsGuBOTr7D93NUQD+OOWsIhX6mNISIl FFhP8cd0/ZZVV//9j+q+5B4BaJsT+ZtwmrelKFnPdwPSnh+3iu8zPRRWO+8P8fRC YvddxuJAmE6BLmsAYrdz6Xb/wqfyV44cEiyivF0oBQfnhbtnXwDnkDWSfJD1bvCm ZwfpDh2+Tg== =LzyE -----END PGP SIGNATURE----- Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ... |
||
|
Nikolay Borisov
|
1fd4033dd0 |
btrfs: rename BTRFS_INODE_ORDERED_DATA_CLOSE flag
Commit |
||
Madhuparna Bhowmik
|
8d1a7aae89 |
btrfs: annotate device name rcu_string with __rcu
This patch fixes the following sparse errors in fs/btrfs/super.c in function btrfs_show_devname() fs/btrfs/super.c: error: incompatible types in comparison expression (different address spaces): fs/btrfs/super.c: struct rcu_string [noderef] <asn:4> * fs/btrfs/super.c: struct rcu_string * The error was because of the following line in function btrfs_show_devname(): if (first_dev) seq_escape(m, rcu_str_deref(first_dev->name), " \t\n\\"); Annotating the btrfs_device::name member with __rcu fixes the sparse error. Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
96c2e067ed |
btrfs: skip devices without magic signature when mounting
Many things can happen after the device is scanned and before the device is mounted. One such thing is losing the BTRFS_MAGIC on the device. If it happens we still won't free that device from the memory and cause the userland confusion. For example: As the BTRFS_IOC_DEV_INFO still carries the device path which does not have the BTRFS_MAGIC, 'btrfs fi show' still lists device which does not belong to the filesystem anymore: $ mkfs.btrfs -fq -draid1 -mraid1 /dev/sda /dev/sdb $ wipefs -a /dev/sdb # /dev/sdb does not contain magic signature $ mount -o degraded /dev/sda /btrfs $ btrfs fi show -m Label: none uuid: 470ec6fb-646b-4464-b3cb-df1b26c527bd Total devices 2 FS bytes used 128.00KiB devid 1 size 3.00GiB used 571.19MiB path /dev/sda devid 2 size 3.00GiB used 571.19MiB path /dev/sdb We need to distinguish the missing signature and invalid superblock, so add a specific error code ENODATA for that. This also fixes failure of fstest btrfs/198. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
572c83acdc |
btrfs: cleanup cow block on error
In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead
to a system lockup. It gets stuck trying to write back inodes, and the
write back thread was trying to lock an extent buffer:
$ cat /proc/2143497/stack
[<0>] __btrfs_tree_lock+0x108/0x250
[<0>] lock_extent_buffer_for_io+0x35e/0x3a0
[<0>] btree_write_cache_pages+0x15a/0x3b0
[<0>] do_writepages+0x28/0xb0
[<0>] __writeback_single_inode+0x54/0x5c0
[<0>] writeback_sb_inodes+0x1e8/0x510
[<0>] wb_writeback+0xcc/0x440
[<0>] wb_workfn+0xd7/0x650
[<0>] process_one_work+0x236/0x560
[<0>] worker_thread+0x55/0x3c0
[<0>] kthread+0x13a/0x150
[<0>] ret_from_fork+0x1f/0x30
This is because we got an error while COWing a block, specifically here
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) {
ret = btrfs_reloc_cow_block(trans, root, buf, cow);
if (ret) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
[16402.241552] BTRFS: Transaction aborted (error -2)
[16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540
[16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8
[16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
[16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540
[16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282
[16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388
[16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380
[16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000
[16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0
[16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000
[16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000
[16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0
[16402.257867] Call Trace:
[16402.258072] btrfs_cow_block+0x109/0x230
[16402.258356] btrfs_search_slot+0x530/0x9d0
[16402.258655] btrfs_lookup_file_extent+0x37/0x40
[16402.259155] __btrfs_drop_extents+0x13c/0xd60
[16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0
[16402.259949] btrfs_replace_file_extents+0x190/0x820
[16402.260873] btrfs_clone+0x9ae/0xc00
[16402.261139] btrfs_extent_same_range+0x66/0x90
[16402.261771] btrfs_remap_file_range+0x353/0x3b1
[16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140
[16402.262821] vfs_dedupe_file_range+0x189/0x220
[16402.263150] do_vfs_ioctl+0x552/0x700
[16402.263662] __x64_sys_ioctl+0x62/0xb0
[16402.264023] do_syscall_64+0x33/0x40
[16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[16402.264862] RIP: 0033:0x7f542c7d15cb
[16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb
[16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003
[16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64
[16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
[16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80
[16402.271498] irq event stamp: 0
[16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0
[16402.274338] ---[ end trace 737874a5a41a8236 ]---
[16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.276179] BTRFS info (device dm-9): forced readonly
[16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry
[16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.280582] BTRFS info (device dm-9): balance: ended with status: -30
The problem here is that as soon as we allocate the new block it is
locked and marked dirty in the btree inode. This means that we could
attempt to writeback this block and need to lock the extent buffer.
However we're not unlocking it here and thus we deadlock.
Fix this by unlocking the cow block if we have any errors inside of
__btrfs_cow_block, and also free it so we do not leak it.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Goldwyn Rodrigues
|
e3c57805f8 |
btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
Since we now perform direct reads using i_rwsem, we can remove this inode flag used to co-ordinate unlocked reads. The truncate call takes i_rwsem. This means it is correctly synchronized with concurrent direct reads. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <jth@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
92e26df43b |
btrfs: return error if we're unable to read device stats
I noticed when fixing device stats for seed devices that we simply threw away the return value from btrfs_search_slot(). This is because we may not have stat items, but we could very well get an error, and thus miss reporting the error up the chain. Fix this by returning ret if it's an actual error, and then stop trying to init the rest of the devices stats and return the error up the chain. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
124604eb50 |
btrfs: init device stats for seed devices
We recently started recording device stats across the fleet, and noticed a large increase in messages such as this BTRFS warning (device dm-0): get dev_stats failed, not yet valid on our tiers that use seed devices for their root devices. This is because we do not initialize the device stats for any seed devices if we have a sprout device and mount using that sprout device. The basic steps for reproducing are: $ mkfs seed device $ mount seed device # fill seed device $ umount seed device $ btrfstune -S 1 seed device $ mount seed device $ btrfs device add -f sprout device /mnt/wherever $ umount /mnt/wherever $ mount sprout device /mnt/wherever $ btrfs device stats /mnt/wherever This will fail with the above message in dmesg. Fix this by iterating over the fs_devices->seed if they exist in btrfs_init_dev_stats. This fixed the problem and properly reports the stats for both devices. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ rename to btrfs_device_init_dev_stats ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
905eb88bce |
btrfs: remove struct extent_io_ops
It's no longer used just remove the function and any related code which was initialising it for inodes. No functional changes. Removing 8 bytes from extent_io_tree in turn reduces size of other structures where it is embedded, notably btrfs_inode where it reduces size by 24 bytes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
1b36294a6c |
btrfs: call submit_bio_hook directly for metadata pages
No need to go through a function pointer indirection simply call submit_bio_hook directly by exporting and renaming the helper to btrfs_submit_metadata_bio. This makes the code more readable and should result in somewhat faster code due to no longer paying the price for specualtive attack mitigations that come with indirect function calls. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
908930f3ed |
btrfs: stop calling submit_bio_hook for data inodes
Instead export and rename the function to btrfs_submit_data_bio and call it directly in submit_one_bio. This avoids paying the cost for speculative attacks mitigations and improves code readability. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
be17b3afc4 |
btrfs: don't opencode is_data_inode in end_bio_extent_readpage
Use the is_data_inode helper. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
cd0537449c |
btrfs: call submit_bio_hook directly in submit_one_bio
BTRFS has 2 inode types (for the purposes of the code in submit_one_bio) - ordinary data inodes (including the freespace inode) and the btree inode. Both of these implement submit_bio_hook so btrfsic_submit_bio can never be called from submit_one_bio so just remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
1f03d9cfda |
btrfs: remove extent_io_ops::readpage_end_io_hook
It's no longer used so let's remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Nikolay Borisov
|
9a446d6a9f |
btrfs: replace readpage_end_io_hook with direct calls
Don't call readpage_end_io_hook for the btree inode. Instead of relying on indirect calls to implement metadata buffer validation simply check if the inode whose page we are processing equals the btree inode. If it does call the necessary function. This is an improvement in 2 directions: 1. We aren't paying the penalty of indirect calls in a post-speculation attacks world. 2. The function is now named more explicitly so it's obvious what's going on This is in preparation to removing struct extent_io_ops altogether. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
9c2b4e0347 |
btrfs: send, recompute reference path after orphanization of a directory
During an incremental send, when an inode has multiple new references we might end up emitting rename operations for orphanizations that have a source path that is no longer valid due to a previous orphanization of some directory inode. This causes the receiver to fail since it tries to rename a path that does not exists. Example reproducer: $ cat reproducer.sh #!/bin/bash mkfs.btrfs -f /dev/sdi >/dev/null mount /dev/sdi /mnt/sdi touch /mnt/sdi/f1 touch /mnt/sdi/f2 mkdir /mnt/sdi/d1 mkdir /mnt/sdi/d1/d2 # Filesystem looks like: # # . (ino 256) # |----- f1 (ino 257) # |----- f2 (ino 258) # |----- d1/ (ino 259) # |----- d2/ (ino 260) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1 btrfs send -f /tmp/snap1.send /mnt/sdi/snap1 # Now do a series of changes such that: # # *) inode 258 has one new hardlink and the previous name changed # # *) both names conflict with the old names of two other inodes: # # 1) the new name "d1" conflicts with the old name of inode 259, # under directory inode 256 (root) # # 2) the new name "d2" conflicts with the old name of inode 260 # under directory inode 259 # # *) inodes 259 and 260 now have the old names of inode 258 # # *) inode 257 is now located under inode 260 - an inode with a number # smaller than the inode (258) for which we created a second hard # link and swapped its names with inodes 259 and 260 # ln /mnt/sdi/f2 /mnt/sdi/d1/f2_link mv /mnt/sdi/f1 /mnt/sdi/d1/d2/f1 # Swap d1 and f2. mv /mnt/sdi/d1 /mnt/sdi/tmp mv /mnt/sdi/f2 /mnt/sdi/d1 mv /mnt/sdi/tmp /mnt/sdi/f2 # Swap d2 and f2_link mv /mnt/sdi/f2/d2 /mnt/sdi/tmp mv /mnt/sdi/f2/f2_link /mnt/sdi/f2/d2 mv /mnt/sdi/tmp /mnt/sdi/f2/f2_link # Filesystem now looks like: # # . (ino 256) # |----- d1 (ino 258) # |----- f2/ (ino 259) # |----- f2_link/ (ino 260) # | |----- f1 (ino 257) # | # |----- d2 (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2 btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2 mkfs.btrfs -f /dev/sdj >/dev/null mount /dev/sdj /mnt/sdj btrfs receive -f /tmp/snap1.send /mnt/sdj btrfs receive -f /tmp/snap2.send /mnt/sdj umount /mnt/sdi umount /mnt/sdj When executed the receive of the incremental stream fails: $ ./reproducer.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: rename d1/d2 -> o260-6-0 failed: No such file or directory This happens because: 1) When processing inode 257 we end up computing the name for inode 259 because it is an ancestor in the send snapshot, and at that point it still has its old name, "d1", from the parent snapshot because inode 259 was not yet processed. We then cache that name, which is valid until we start processing inode 259 (or set the progress to 260 after processing its references); 2) Later we start processing inode 258 and collecting all its new references into the list sctx->new_refs. The first reference in the list happens to be the reference for name "d1" while the reference for name "d2" is next (the last element of the list). We compute the full path "d1/d2" for this second reference and store it in the reference (its ->full_path member). The path used for the new parent directory was "d1" and not "f2" because inode 259, the new parent, was not yet processed; 3) When we start processing the new references at process_recorded_refs() we start with the first reference in the list, for the new name "d1". Because there is a conflicting inode that was not yet processed, which is directory inode 259, we orphanize it, renaming it from "d1" to "o259-6-0"; 4) Then we start processing the new reference for name "d2", and we realize it conflicts with the reference of inode 260 in the parent snapshot. So we issue an orphanization operation for inode 260 by emitting a rename operation with a destination path of "o260-6-0" and a source path of "d1/d2" - this source path is the value we stored in the reference earlier at step 2), corresponding to the ->full_path member of the reference, however that path is no longer valid due to the orphanization of the directory inode 259 in step 3). This makes the receiver fail since the path does not exists, it should have been "o259-6-0/d2". Fix this by recomputing the full path of a reference before emitting an orphanization if we previously orphanized any directory, since that directory could be a parent in the new path. This is a rare scenario so keeping it simple and not checking if that previously orphanized directory is in fact an ancestor of the inode we are trying to orphanize. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
98272bb77b |
btrfs: send, orphanize first all conflicting inodes when processing references
When doing an incremental send it is possible that when processing the new references for an inode we end up issuing rename or link operations that have an invalid path, which contains the orphanized name of a directory before we actually orphanized it, causing the receiver to fail. The following reproducer triggers such scenario: $ cat reproducer.sh #!/bin/bash mkfs.btrfs -f /dev/sdi >/dev/null mount /dev/sdi /mnt/sdi touch /mnt/sdi/a touch /mnt/sdi/b mkdir /mnt/sdi/testdir # We want "a" to have a lower inode number then "testdir" (257 vs 259). mv /mnt/sdi/a /mnt/sdi/testdir/a # Filesystem looks like: # # . (ino 256) # |----- testdir/ (ino 259) # | |----- a (ino 257) # | # |----- b (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1 btrfs send -f /tmp/snap1.send /mnt/sdi/snap1 # Now rename 259 to "testdir_2", then change the name of 257 to # "testdir" and make it a direct descendant of the root inode (256). # Also create a new link for inode 257 with the old name of inode 258. # By swapping the names and location of several inodes and create a # nasty dependency chain of rename and link operations. mv /mnt/sdi/testdir/a /mnt/sdi/a2 touch /mnt/sdi/testdir/a mv /mnt/sdi/b /mnt/sdi/b2 ln /mnt/sdi/a2 /mnt/sdi/b mv /mnt/sdi/testdir /mnt/sdi/testdir_2 mv /mnt/sdi/a2 /mnt/sdi/testdir # Filesystem now looks like: # # . (ino 256) # |----- testdir_2/ (ino 259) # | |----- a (ino 260) # | # |----- testdir (ino 257) # |----- b (ino 257) # |----- b2 (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2 btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2 mkfs.btrfs -f /dev/sdj >/dev/null mount /dev/sdj /mnt/sdj btrfs receive -f /tmp/snap1.send /mnt/sdj btrfs receive -f /tmp/snap2.send /mnt/sdj umount /mnt/sdi umount /mnt/sdj When running the reproducer, the receive of the incremental send stream fails: $ ./reproducer.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: link b -> o259-6-0/a failed: No such file or directory The problem happens because of the following: 1) Before we start iterating the list of new references for inode 257, we generate its current path and store it at @valid_path, done at the very beginning of process_recorded_refs(). The generated path is "o259-6-0/a", containing the orphanized name for inode 259; 2) Then we iterate over the list of new references, which has the references "b" and "testdir" in that specific order; 3) We process reference "b" first, because it is in the list before reference "testdir". We then issue a link operation to create the new reference "b" using a target path corresponding to the content at @valid_path, which corresponds to "o259-6-0/a". However we haven't yet orphanized inode 259, its name is still "testdir", and not "o259-6-0". The orphanization of 259 did not happen yet because we will process the reference named "testdir" for inode 257 only in the next iteration of the loop that goes over the list of new references. Fix the issue by having a preliminar iteration over all the new references at process_recorded_refs(). This iteration is responsible only for doing the orphanization of other inodes that have and old reference that conflicts with one of the new references of the inode we are currently processing. The emission of rename and link operations happen now in the next iteration of the new references. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
1465af12e2 |
btrfs: tree-checker: fix false alert caused by legacy btrfs root item
Commit |
||
|
David Sterba
|
e97659cefe |
btrfs: use unaligned helpers for stack and header set/get helpers
In the definitions generated by BTRFS_SETGET_HEADER_FUNCS there's direct pointer assignment but we should use the helpers for unaligned access for clarity. It hasn't been a problem so far because of the natural alignment. Similarly for BTRFS_SETGET_STACK_FUNCS, that usually get a structure from stack that has an aligned start but some members may not be aligned due to packing. This as well hasn't caused problems so far. Move the put/get_unaligned_le8 stubs to ctree.h so we can use them. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
6994ca367c |
btrfs: free-space-cache: use unaligned helpers to access data
The free space inode stores the tracking data, checksums etc, using the io_ctl structure and moving the pointers. The data are generally aligned to at least 4 bytes (u32 for CRC) so it's not completely unaligned but for clarity we should use the proper helpers whenever a struct is initialized from io_ctl->cur pointer. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
e2f896b318 |
btrfs: send: use helpers for unaligned access to header members
The header is mapped onto the send buffer and thus its members may be potentially unaligned so use the helpers instead of directly assigning the pointers. This has worked so far but let's use the helpers to make that clear. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
2c53a14dd3 |
btrfs: use own btree inode io_tree owner id
Btree inode is special compared to all other inode extent io_trees, although it has a btrfs inode, it doesn't have the track_uptodate bit at all. This means a lot of things like extent locking doesn't even need to be applied to btree io tree. Since it's so special, adds a new owner value for it to make debuging a little easier. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Johannes Thumshirn
|
6b613cc97f |
btrfs: reschedule when cloning lots of extents
We have several occurrences of a soft lockup from fstest's generic/175 testcase, which look more or less like this one: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030] Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 10030 Comm: xfs_io Tainted: G L 5.9.0-rc5+ #768 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack+0x77/0xa0 panic+0xfa/0x2cb watchdog_timer_fn.cold+0x85/0xa5 ? lockup_detector_update_enable+0x50/0x50 __hrtimer_run_queues+0x99/0x4c0 ? recalibrate_cpu_khz+0x10/0x10 hrtimer_run_queues+0x9f/0xb0 update_process_times+0x28/0x80 tick_handle_periodic+0x1b/0x60 __sysvec_apic_timer_interrupt+0x76/0x210 asm_call_on_stack+0x12/0x20 </IRQ> sysvec_apic_timer_interrupt+0x7f/0x90 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs] RSP: 0018:ffffc90007123a58 EFLAGS: 00000282 RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000 RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032 R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000 R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0 ? btrfs_tree_unlock+0x15b/0x1a0 [btrfs] btrfs_release_path+0x67/0x80 [btrfs] btrfs_insert_replace_extent+0x177/0x2c0 [btrfs] btrfs_replace_file_extents+0x472/0x7c0 [btrfs] btrfs_clone+0x9ba/0xbd0 [btrfs] btrfs_clone_files.isra.0+0xeb/0x140 [btrfs] ? file_update_time+0xcd/0x120 btrfs_remap_file_range+0x322/0x3b0 [btrfs] do_clone_file_range+0xb7/0x1e0 vfs_clone_file_range+0x30/0xa0 ioctl_file_clone+0x8a/0xc0 do_vfs_ioctl+0x5b2/0x6f0 __x64_sys_ioctl+0x37/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f87977fc247 RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247 RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003 RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000 R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000 Kernel Offset: disabled ---[ end Kernel panic - not syncing: softlockup: hung tasks ]--- All of these lockup reports have the call chain btrfs_clone_files() -> btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with both source and destination extents locked and loops over the source extent to create the clones. Conditionally reschedule in the btrfs_clone() loop, to give some time back to other processes. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Denis Efremov
|
bae12df966 |
btrfs: use kvcalloc for allocation in btrfs_ioctl_send()
Replace kvzalloc() call with kvcalloc() that also checks the size internally. There's a standalone overflow check in the function so we can return invalid parameter combination. Use array_size() helper to compute the memory size for clone_sources_tmp. Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Denis Efremov
|
8eb2fd0015 |
btrfs: use kvzalloc() to allocate clone_roots in btrfs_ioctl_send()
btrfs_ioctl_send() used open-coded kvzalloc implementation earlier.
The code was accidentally replaced with kzalloc() call [1]. Restore
the original code by using kvzalloc() to allocate sctx->clone_roots.
[1] https://patchwork.kernel.org/patch/9757891/#20529627
Fixes:
|