IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As it turns out, my earlier patch in commit 86d46fdaa12a (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.
Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).
Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.
Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.
After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95f (ataflop: convert to blk-mq)
CC: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use sync_blockdev instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support for cyrptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013). The XOR transfer has never been more than a toy to demonstrate
the transfer in the bad old times of crypto export restrictions.
Remove them as they have some nasty interactions with loop device life
times due to the iteration over all loop devices in
loop_unregister_transfer.
Suggested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019075639.2333969-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export scsi_device_from_queue for use with pktcdvd and use that instead
of the otherwise unused QUEUE_FLAG_SCSI_PASSTHROUGH queue flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.
Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a nbd device encounters a writeback error, that error will
get propagated to the bd_inode's wb_err field. Then if this nbd
device's backend is disconnected and another is attached, we will
get back the previous writeback error on fsync, which is unexpected.
To fix it, let's use invalidate_disk() helper to invalidate the
disk on disconnect instead of just setting disk's capacity to zero.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210922123711.187-5-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lo->lo_device can't be null if the lo->lo_backing_file is set.
So let's remove the unnecessary bdev checks and the entire bdev
variable in __loop_clr_fd() since the lo->lo_backing_file is already
checked before.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210922123711.187-4-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use invalidate_disk() helper to simplify the code for gendisk
invalidation.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210922123711.187-3-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211015233028.2167651-9-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on device_add_disk() as this function
returned void. Now that this is fixed, use the shiny new error
handling. The function xlvbd_alloc_gendisk() typically does the
unwinding on error on allocating the disk and creating the tag,
but since all that error handling was stuffed inside
xlvbd_alloc_gendisk() we must repeat the tag free'ing as well.
We set the info->rq to NULL to ensure blkif_free() doesn't crash
on blk_mq_stop_hw_queues() on device_add_disk() error as the queue
will be long gone by then.
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211015233028.2167651-6-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211021064931.1047687-1-ye.guojin@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactoring of the Atari floppy driver when converting to blk-mq
has broken the state machine in not-so-subtle ways:
finish_fdc() must be called when operations on the floppy device
have completed. This is crucial in order to relase the ST-DMA
lock, which protects against concurrent access to the ST-DMA
controller by other drivers (some DMA related, most just related
to device register access - broken beyond compare, I know).
When rewriting the driver's old do_request() function, the fact
that finish_fdc() was called only when all queued requests had
completed appears to have been overlooked. Instead, the new
request function calls finish_fdc() immediately after the last
request has been queued. finish_fdc() executes a dummy seek after
most requests, and this overwrites the state machine's interrupt
hander that was set up to wait for completion of the read/write
request just prior. To make matters worse, finish_fdc() is called
before device interrupts are re-enabled, making certain that the
read/write interupt is missed.
Shifting the finish_fdc() call into the read/write request
completion handler ensures the driver waits for the request to
actually complete. With a queue depth of 2, we won't see long
request sequences, so calling finish_fdc() unconditionally just
adds a little overhead for the dummy seeks, and keeps the code
simple.
While we're at it, kill ataflop_commit_rqs() which does nothing
but run finish_fdc() unconditionally, again likely wiping out an
in-flight request.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95 ("ataflop: convert to blk-mq")
CC: linux-block@vger.kernel.org
CC: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/r/20211019061321.26425-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a problem that nbd_handle_reply() might access freed request:
1) At first, a normal io is submitted and completed with scheduler:
internel_tag = blk_mq_get_tag -> get tag from sched_tags
blk_mq_rq_ctx_init
sched_tags->rq[internel_tag] = sched_tag->static_rq[internel_tag]
...
blk_mq_get_driver_tag
__blk_mq_get_driver_tag -> get tag from tags
tags->rq[tag] = sched_tag->static_rq[internel_tag]
So, both tags->rq[tag] and sched_tags->rq[internel_tag] are pointing
to the request: sched_tags->static_rq[internal_tag]. Even if the
io is finished.
2) nbd server send a reply with random tag directly:
recv_work
nbd_handle_reply
blk_mq_tag_to_rq(tags, tag)
rq = tags->rq[tag]
3) if the sched_tags->static_rq is freed:
blk_mq_sched_free_requests
blk_mq_free_rqs(q->tag_set, hctx->sched_tags, i)
-> step 2) access rq before clearing rq mapping
blk_mq_clear_rq_mapping(set, tags, hctx_idx);
__free_pages() -> rq is freed here
4) Then, nbd continue to use the freed request in nbd_handle_reply
Fix the problem by get 'q_usage_counter' before blk_mq_tag_to_rq(),
thus request is ensured not to be freed because 'q_usage_counter' is
not zero.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210916141810.2325276-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare to fix uaf in nbd_read_stat(), no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-7-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check if sock_xmit() return 0 is useless because it'll never return
0, comment it and remove such checkings.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-6-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 6a468d5990ec ("nbd: don't start req until after the dead
connection logic") move blk_mq_start_request() from nbd_queue_rq()
to nbd_handle_cmd() to skip starting request if the connection is
dead. However, request is still started in other error paths.
Currently, blk_mq_end_request() will be called immediately if
nbd_queue_rq() failed, thus start request in such situation is
useless. So remove blk_mq_start_request() from error paths in
nbd_handle_cmd().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sock that clent send request in nbd_send_cmd() and receive reply
in nbd_read_stat() should be the same.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit cddce0116058 ("nbd: Aovid double completion of a request")
try to fix that nbd_clear_que() and recv_work() can complete a
request concurrently. However, the problem still exists:
t1 t2 t3
nbd_disconnect_and_put
flush_workqueue
recv_work
blk_mq_complete_request
blk_mq_complete_request_remote -> this is true
WRITE_ONCE(rq->state, MQ_RQ_COMPLETE)
blk_mq_raise_softirq
blk_done_softirq
blk_complete_reqs
nbd_complete_rq
blk_mq_end_request
blk_mq_free_request
WRITE_ONCE(rq->state, MQ_RQ_IDLE)
nbd_clear_que
blk_mq_tagset_busy_iter
nbd_clear_req
__blk_mq_free_request
blk_mq_put_tag
blk_mq_complete_request -> complete again
There are three places where request can be completed in nbd:
recv_work(), nbd_clear_que() and nbd_xmit_timeout(). Since they
all hold cmd->lock before completing the request, it's easy to
avoid the problem by setting and checking a cmd flag.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While handling a response message from server, nbd_read_stat() will
try to get request by tag, and then complete the request. However,
this is problematic if nbd haven't sent a corresponding request
message:
t1 t2
submit_bio
nbd_queue_rq
blk_mq_start_request
recv_work
nbd_read_stat
blk_mq_tag_to_rq
blk_mq_complete_request
nbd_send_cmd
Thus add a new cmd flag 'NBD_CMD_INFLIGHT', it will be set in
nbd_send_cmd() and checked in nbd_read_stat().
Noted that this patch can't fix that blk_mq_tag_to_rq() might
return a freed request, and this will be fixed in following
patches.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210916093350.1410403-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0fea349c808c6cfbf549b0e33701320c7860c8b7.1634234221.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
swim3 got this through blkdev.h previously, but blkdev.h is not including
it anymore. Include it specifically for the driver, otherwise FLOPPY_MAJOR
is undefined and breaks the compile on PPC if swim3 is configured.
Fixes: b81e0c2372e6 ("block: drop unused includes in <linux/genhd.h>")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return a negative error code here on this error path instead of
returning success.
Fixes: 637208e74a86 ("block/sx8: add error handling support for add_disk()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001122722.GC2283@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-15-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using two separate code paths for cleaning up an atari disk,
use one. We take the more careful approach to check for *all* disk
types, as is done on exit. The init path didn't have that check as
the alternative disk types are only probed for later, they are not
initialized by default.
Yes, there is a shared tag for all disks.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-14-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ataflop assumes del_gendisk() is safe to call, this is only
true because add_disk() does not return a failure, but that will
change soon. And so, before we get to adding error handling for
that case, let's make sure we keep track of which disks actually
get registered. Then we use this to only call del_gendisk for them.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-13-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Since we have a caller to do our unwinding for the disk,
and this is already dealt with safely we can re-use our
existing error path goto label which already deals with
the cleanup.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-11-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of calling del_gendisk() on exit alone, let's add
a registration bool to the floppy disk state, this way this can
be done on the shared caller, swim_cleanup_floppy_disk().
This will be more useful in subsequent patches. Right now, this
just shuffles functionality out to a helper in a safe way.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-10-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Disk cleanup can be shared between exit and bringup. Use a
helper to do the work required. The only functional change at
this point is we're being overly paraoid on exit to check for
a null disk as well now, and this should be safe.
We'll later expand on this, this change just makes subsequent
changes easier to read.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-9-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can simplify swim_remove() by using one call instead of two,
just as other drivers do. Use that pattern.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-8-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling. The caller for fd_alloc_disk() deals with
the rest of the cleanup like the tag.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-7-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-6-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
platform_device_unregister() should only be called when
a respective platform_device_register() is called. However
the floppy driver currently allows failures when registring
a drive and a bail out could easily cause an invalid call
to platform_device_unregister() where it was not intended.
Fix this by adding a bool to keep track of when the platform
device was registered for a drive.
This does not fix any known panic / bug. This issue was found
through code inspection while preparing the driver to use the
up and coming support for device_add_disk() error handling.
From what I can tell from code inspection, chances of this
ever happening should be insanely small, perhaps OOM.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-5-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the blk_cleanup_queue() followed by put_disk() can be
replaced with blk_cleanup_disk(). No need for two separate
loops.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-4-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the patch titled "floppy: use blk_mq_alloc_disk and
blk_cleanup_disk" the floppy driver was modified to allocate
the blk_mq_alloc_disk() which allocates the disk with the
queue. This is further clarified later with the patch titled
"block: remove alloc_disk and alloc_disk_node". This clarifies
that:
Most drivers should use and have been converted to use
blk_alloc_disk and blk_mq_alloc_disk. Only the scsi
ULPs and dasd still allocate a disk separately from the
request_queue so don't bother with convenience macros for
something that should not see significant new users and
remove these wrappers.
And then we have the patch titled, "block: hold a request_queue
reference for the lifetime of struct gendisk" which ensures
that a queue is *always* present for sure during the entire
lifetime of a disk.
In the floppy driver's case then the disk always comes with the
queue. So even if even if the queue was cleaned up on exit, putting
the disk *is* still required, and likewise, blk_cleanup_queue() on
a null queue should not happen now as disk->queue is valid from
disk allocation time on.
Automatic backport code scrapers should hopefully not cherry pick
this patch as a stable fix candidate without full due dilligence to
ensure all the work done on the block layer to make this happen is
merged first.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-3-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927220302.1073499-2-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
A completion is used to notify the initial probe what is
happening and so we must defer error handling on completion.
Do this by remembering the error and using the shared cleanup
function.
The tags are shared and so are hanlded later for the
driver already.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
The out_mem2 error label already does what we need so
re-use that.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
The read_capacity_error error label already does what we need,
so just re-use that.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
