11 Commits

Author SHA1 Message Date
Laurent Pinchart
9f007e7b66 dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bits
While the descriptor ID is stored in a 32-bit field in the hardware
descriptor, only 16 bits are used by the hardware and are reported
through the XILINX_DPDMA_CH_DESC_ID register. Failure to handle the
wrap-around results in a descriptor ID mismatch after 65536 frames. Fix
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31 09:37:17 +05:30
Quanyang Wang
538ea65a9f dmaengine: xilinx: dpdma: initialize registers before request_irq
In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized.

We should ensure the dpdma controller to be in a consistent and
clean state before further initialization. So add dpdma_hw_init()
to do this.

Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts
instead of error interrupts.

This patch is to fix the kdump kernel crash as below:

[    3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[    3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[    3.704900] Mem abort info:
[    3.704902]   ESR = 0x96000005
[    3.704905]   EC = 0x25: DABT (current EL), IL = 32 bits
[    3.704907]   SET = 0, FnV = 0
[    3.704912]   EA = 0, S1PTW = 0
[    3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[    3.715585] Data abort info:
[    3.715587]   ISV = 0, ISS = 0x00000005
[    3.715589]   CM = 0, WnR = 0
[    3.715592] [000000000000012c] user address but active_mm is swapper
[    3.715596] Internal error: Oops: 96000005 [#1] SMP
[    3.715599] Modules linked in:
[    3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[    3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[    3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[    3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[    3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[    3.798089] sp : ffffffc01186bdf0
[    3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[    3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[    3.811996] x25: 0000000008000408 x24: 0000000000000003
[    3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[    3.822604] x21: 0000000000000000 x20: 0000000008000408
[    3.827908] x19: 0000000000000000 x18: 0000000000000010
[    3.833212] x17: 0000000000000000 x16: 0000000000000000
[    3.838516] x15: 0000000000000000 x14: ffffffc011291740
[    3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[    3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[    3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[    3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[    3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[    3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[    3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[    3.880948] Call trace:
[    3.883382]  xilinx_dpdma_irq_handler+0x418/0x560
[    3.888079]  __handle_irq_event_percpu+0x5c/0x178
[    3.892774]  handle_irq_event_percpu+0x34/0x98
[    3.897210]  handle_irq_event+0x44/0xb8
[    3.901030]  handle_fasteoi_irq+0xd0/0x190
[    3.905117]  generic_handle_irq+0x30/0x48
[    3.909111]  __handle_domain_irq+0x64/0xc0
[    3.913192]  gic_handle_irq+0x78/0xa0
[    3.916846]  el1_irq+0xc4/0x180
[    3.919982]  cpuidle_enter_state+0x134/0x2f8
[    3.924243]  cpuidle_enter+0x38/0x50
[    3.927810]  call_cpuidle+0x1c/0x40
[    3.931290]  do_idle+0x20c/0x270
[    3.934502]  cpu_startup_entry+0x28/0x58
[    3.938410]  rest_init+0xbc/0xcc
[    3.941631]  arch_call_rest_init+0x10/0x1c
[    3.945718]  start_kernel+0x51c/0x558

Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210430064041.4058180-1-quanyang.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-10 21:40:30 +05:30
Laurent Pinchart
868833fbff dmaengine: xilinx: dpdma: Fix race condition in done IRQ
The active descriptor pointer is accessed from different contexts,
including different interrupt handlers, and its access must be protected
by the channel's lock. This wasn't done in the done IRQ handler. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-16 16:15:06 +05:30
Laurent Pinchart
1cbd446662 dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
When multiple channels are part of a video group, the transfer is
triggered only when all channels in the group are ready. The logic to do
so is incorrect, as it causes the descriptors for all channels but the
last one in a group to not being pushed to the hardware. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-16 16:15:06 +05:30
Allen Pais
b1839e7c2a dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20201006050458.221329-2-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-07 15:22:09 +05:30
Wei Yongjun
144ceb27d7 dmaengine: xilinx: dpdma: Make symbol 'dpdma_debugfs_reqs' static
The sparse tool complains as follows:

drivers/dma/xilinx/xilinx_dpdma.c:349:37: warning:
 symbol 'dpdma_debugfs_reqs' was not declared. Should it be static?

This variable is not used outside of xilinx_dpdma.c, so this commit
marks it static.

Fixes: 1d220435cab3 ("dmaengine: xilinx: dpdma: Add debugfs support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200818112217.43816-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-19 09:54:38 +05:30
Laurent Pinchart
1d220435ca dmaengine: xilinx: dpdma: Add debugfs support
Expose statistics to debugfs when available. This helps debugging issues
with the DPDMA driver.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200812171228.9751-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17 11:20:49 +05:30
Laurent Pinchart
bc227385eb dmaengine: xilinx: dpdma: Fix kerneldoc warning
Document the struct xilinx_dpdma_chan desc field to fix a kerneldoc
undocumented member warning (which can be reproduced by compiling with
W=1).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200722161747.30048-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-22 22:01:13 +05:30
Vinod Koul
ea55b6a349 dmaengine: xilinx: dpdma: add missing kernel doc
xilinx_dpdma_sw_desc_set_dma_addrs() documentation is missing describing
'xdev', so add it

drivers/dma/xilinx/xilinx_dpdma.c:313: warning: Function parameter or
member 'xdev' not described in 'xilinx_dpdma_sw_desc_set_dma_addrs'

Link: https://lore.kernel.org/r/20200718135201.191881-2-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-22 22:00:51 +05:30
Vinod Koul
1c1df90871 dmaengine: xilinx: dpdma: remove comparison of unsigned expression
xilinx_dpdma_config() channel id is unsigned int and compares with
ZYNQMP_DPDMA_VIDEO0 which is zero, so remove this comparison

drivers/dma/xilinx/xilinx_dpdma.c:1073:15: warning: comparison of
unsigned expression in ‘>= 0’ is always true [-Wtype-limits] if
	(chan->id >= ZYNQMP_DPDMA_VIDEO0 && chan->id <= ZYNQMP_DPDMA_VIDEO2)

Link: https://lore.kernel.org/r/20200718135201.191881-1-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-22 22:00:19 +05:30
Hyun Kwon
7cbb0c63de dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver
The ZynqMP DisplayPort subsystem includes a DMA engine called DPDMA with
6 DMa channels (4 for display and 2 for audio). This driver exposes the
DPDMA through the dmaengine API, to be used by audio (ALSA) and display
(DRM) drivers for the DisplayPort subsystem.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Tejas Upadhyay <tejasu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200717013337.24122-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-17 11:37:59 +05:30