8932abef6e
iwlwifi: pcie: Change ma product string name
...
Change ma product string name to the correct name,
and to reflect the CRF and not the CNV.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.c05b4c55540f.I8dd0361b033f63658999ba53640949701b048f17@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-04-14 12:07:21 +03:00
85b5fd94d7
iwlwifi: add ax201 killer device
...
add new killer devices configurations.
Signed-off-by: ybaruch <yaara.baruch@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-04-14 12:07:17 +03:00
39ab22c127
iwlwifi: change step in so-gf struct
...
change the step of iwlax210_2ax_cfg_so_jf_a0 to
iwlax210_2ax_cfg_so_jf_b0 as it is on the wcd_fw-dev
repository.
Signed-off-by: ybaruch <yaara.baruch@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.e9a9d1da76bc.Ie964f37872bbb88d1a02094134f9a2c38faad884@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-04-14 12:07:15 +03:00
2be05dfd9c
iwlwifi: pcie: Add support for Bz Family
...
Add support for different combinations of Bz
and CRFs.
Note: As of now we do not know the exact values
for ltr_delay and xtal_latency, so for now use the
worst case scenario values until the actual values
are clarified.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.caac8d996532.I6a22d6decb106cd50d7954b19236b69d685dcc39@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-04-14 12:06:48 +03:00
08f4b0b1c0
iwlwifi: pcie: add support for So-F devices
...
We have a new type of device that has a different MAC ID, but is
otherwise identical to So devices. Add rules to match this new ID
accordingly.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Signed-off-by: Kalle Valo <kvalo@codeaurora.org >
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.4feea3560def.I2b6ef794c2073a18779dd40fb53f8c942d1ab42d@changeid
2021-04-06 13:26:12 +03:00
edba17ad85
iwlwifi: remove max_ht_ampdu_exponent config parameter
...
This always has the same value, since we don't have any
devices with different values; remove the parameter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.50d11cbb073f.Ia44d022a4c549eb5fe0254fb20c62aa8d0bba634@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-02-11 01:52:10 +02:00
eebe75d165
iwlwifi: remove max_vht_ampdu_exponent config parameter
...
This is not (or no longer) used, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.ed18d7c8e7b8.Ic3fdf7c8636f332e3d5ee5841b03bf85e3bc4855@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-02-11 01:52:10 +02:00
1205d7f7ff
iwlwifi: pcie: add AX201 and AX211 radio modules for Ma devices
...
Add support for AX201 and AX211 radio modules, which we call HR2 and
GF, respectively. These modules can be used with the Ma family of
devices and above.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.f8e3080ce633.I7377b421b031796730daf809c4024a3c3ef95fa8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-02-10 14:39:42 +02:00
b964bfd048
iwlwifi: pcie: add CDB bit to the device configuration parsing
...
Some new devices contain an extra bit in the CRF ID register to denote
that they support CDB. Add definitions and macros to be able to
support it and add the "NO_CDB" to all existing entired.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.7b40184d9899.I3bb2cf9b9afb0457583f786dc52d4d1b1ad75ffc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-02-10 14:39:41 +02:00
410f758529
iwlwifi: add new cards for So and Qu family
...
add few PCI ID'S for So with Hr and Qu with Hr in AX family.
Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210206130110.6f0c1849f7dc.I647b4d22f9468c2f34b777a4bfa445912c6f04f0@changeid
2021-02-10 13:57:00 +02:00
b7e6725df7
Merge tag 'iwlwifi-next-for-kalle-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
...
iwlwifi patches intended for v5.12
* Check FW notification sizes for robustness;
* Improvements in the NAPI implementation;
* Implement a workaround for CCA-EXT;
* Add new FW API support;
* Fix a CSA bug;
* Implement PHY integration version parsing;
* A bit of refactoring;
* One more CSA bug fix, this time in the AP side;
* Support for new So devices and a bit of reorg;
* Per Platform Antenna Gain (PPAG) fixes and improvements;
* Improvements in the debug framework;
* Some other clean-ups and small fixes.
# gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi >"
# gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com >"
2021-02-08 18:52:00 +02:00
930be4e76f
iwlwifi: add support for SnJ with Jf devices
...
Add support for SnJ devices with Jf and a workaround for some cases
where the devices erroneously show as QnJ devices.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.ae6ed654e557.Ic11ed4df410328359b6a2c997456692901d99468@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-02-05 11:56:43 +02:00
6f60fb03c8
iwlwifi: move SnJ and So rules to the new tables
...
We were hardcoding the SnJ and So IDs already at the trans_cfg
selection, instead of doing it in a more generic way. Use the generic
trans_cfg selection for these devices and move the hardcoded IDs to
the new table.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.7e11dcb7b04e.I6f65126175d54b73834c2896013d00ce114ff601@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2021-02-05 11:56:43 +02:00
4886460c4d
iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
...
The bit that indicates if the device supports 160MHZ
is bit #9 . The macro checks bit #8 .
Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com >
Fixes: d6f2134a38luciano.coelho@intel.com >
Signed-off-by: Kalle Valo <kvalo@codeaurora.org >
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.bddbf9b57a75.I16e09e2b1404b16bfff70852a5a654aa468579e2@changeid
2021-01-25 15:59:22 +02:00
16062c12ed
iwlwifi: pcie: add rules to match Qu with Hr2
...
Until now we have been relying on matching the PCI ID and subsystem
device ID in order to recognize Qu devices with Hr2. Add rules to
match these devices, so that we don't have to add a new rule for every
new ID we get.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Signed-off-by: Kalle Valo <kvalo@codeaurora.org >
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
2021-01-25 15:59:17 +02:00
ac1a98e1e9
iwlwifi: Add a new card for MA family
...
Add a PCI ID for snj with mr in AX family.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.101ac3058c04.Idd28706b122cdc8103956f8e72bb062fe4adb54e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-12-10 00:16:05 +02:00
8e99ea8d09
iwlwifi: use SPDX tags
...
Use SPDX tags instead of the long copyright notices. Also cleanup
some duplicate copyright notices and combine the years where possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-12-10 00:15:31 +02:00
cdaba91726
iwlwifi: follow the new inclusive terminology
...
The new inclusive terminology requires to change a few
terms that were used in iwlwifi.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-12-10 00:14:12 +02:00
568d343417
iwlwifi: pcie: invert values of NO_160 device config entries
...
The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.
Fixes: d6f2134a38luciano.coelho@intel.com >
Signed-off-by: Kalle Valo <kvalo@codeaurora.org >
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
2020-12-02 21:01:33 +02:00
24436191a3
iwlwifi: pcie: fix xtal latency for 9560 devices
...
We were using a very high latency for all 9560 devices so they all
would have time to stabilize. But this causes the system to be
slighly slower, so we can use the best values for each device.
This requires a new trans cfg struct for devices with longer latency
and some adjustments to the other structs.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Signed-off-by: Kalle Valo <kvalo@codeaurora.org >
Link: https://lore.kernel.org/r/iwlwifi.20201008181047.34392f98fdb1.I3d3db14f6d1a8ecc547ca6afce8488816bd26081@changeid
2020-10-08 20:14:48 +03:00
bc9296f4a8
iwlwifi: add new cards for MA family
...
add few PCI ID'S for ma with gf and mr in AX family.
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.6add94c21abe.I1aa1c5e3c2c12ce82ed30429e0ad92225ece7ce3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-10-01 21:56:48 +03:00
64564669e1
iwlwifi: add new cards for AX201 family
...
add few PCI ID'S for AX201 family including killer cards.
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.21397978115f.Id2d95275a36a6bb6b226d12cb6c5a629334587db@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-10-01 21:53:03 +03:00
0f736f3bec
iwlwifi: fix config variable name in comment
...
The correct variable name was replaced here by mistake by commit
ab27926d9eluca@lucaceresoli.net >
Link: https://lore.kernel.org/r/20200210135817.31994-1-luca@lucaceresoli.net
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-06-08 13:30:51 +03:00
3f910a2583
iwlwifi: pcie: convert all AX101 devices to the device tables
...
Convert all Qu/Hr1 devices to the new device tables, by modifying the
corresponding structures, adding a new name and generalizing the
device recognition.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.ec0e04102d2c.Ia36f2c7bbf06cb6436424d40d6adb2376f2962ee@changeid
2020-05-08 09:52:10 +03:00
d5727b60a1
iwlwifi: pcie: convert QnJ with Hr to the device table
...
Convert all the occurrences of QnJ with Hr into a single entry in the
PCI device table.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.21283ca79d82.I57a493c679a56fff11417afdaec76617711ff6a9@changeid
2020-05-08 09:52:04 +03:00
62bee4862b
iwlwifi: pcie: add new structs for So devices with long latency
...
Some So devices have a longer wake latency. To support this properly,
add new cfg structs for them so the driver will inform the FW about
the need to use another xtal and use a higher wait value during state
transitions.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.daf515618f57.I80e60006b108e1586e3c56669635c670597fe08d@changeid
2020-04-24 16:38:12 +03:00
9c9613f0ee
iwlwifi: pcie: add new structure for Qu devices with medium latency
...
Some Qu devices require an intermediate amount of time to wake up and
for LTR notifications, so add a new structure with the correct values
for them and change the corresponding devices to use it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.d6df2bcee78f.Ie008b0c8f03340a466c1ef981bfd25359c9de90d@changeid
2020-04-24 16:38:11 +03:00
0928df0a86
iwlwifi: mvm: tell firmware about required LTR delay
...
Some (integrated) devices need a longer LTR delay than the firmware
would typically apply, tell it about that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.24276ae2ad61.I8831a538f75893d5cee47b4a81f4b9b7fd0e8bea@changeid
2020-04-24 16:38:11 +03:00
e819a80a97
iwlwifi: add new cards for AX family
...
add few PCI ID'S for AX family.
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com >
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5eae2261b70c.I0369619a562c4e4008e2f0a3afb9ed5d4c9b49d4@changeid
2020-04-24 16:38:11 +03:00
f4ed93a192
iwlwifi: remove support for QnJ HR FPGA
...
We don't support the FPGA versions of this card combination anymore.
Remove the cfg mangling that tries to load it and all the relevant
structures.
Change-Id: I190652101afcab682cfba873d062992f11efca32
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:50 +02:00
a661bfac2a
iwlwifi: remove support for QnJ Hr STEP A
...
We don't support QnJ HR STEP A anymore. Remove the structures we used
for it.
Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:50 +02:00
a72abfca95
iwlwifi: add trans_cfg for devices with long latency
...
A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and
0x43F0, need a longer wait for the xtal to stabilize. To handle this,
add a new trans_cfg structure for Qu devices with a larger
xtal_latency value and apply them to the devices recognized by these
IDs. Also add a flag that allows us to inform the FW that the low
latency xtal should be used.
Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:49 +02:00
095650c054
iwlwifi: add support for version 2 of SOC_CONFIGURATION_CMD
...
This new command is mostly backwards compatible, with the exception
that the device_type element was changed into a bitmask. The device
type bit remains the same (because we only had 0 and 1 anyway), but
when using v1 we can't set any other bits, because that would change
the integer.
Other than that, the struct remains the same and the driver can set
the device_type bit in both cases, but it can only set the low_latency
bit if VER_2 is used.
Change-Id: Ib68d4c821ebcce253b42ed0ea15881fb4e3e01da
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:49 +02:00
68ceba3ff4
iwlwifi: remove unnecessary cfg mangling for Qu C and QuZ with Jf
...
Now that we identify the correct cfgs with the new tables for Qu step
C and QuZ with Jf, we can remove the mangling we do later on.
Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:49 +02:00
612509d6bd
iwlwifi: convert QnJ with Jf devices to new config table
...
All the QnJ devices have a similar matching to the other Qu devices,
but needs a different configuration. Convert the QnJ devices to the
new table accordingly.
Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:49 +02:00
32ed101aa1
iwlwifi: convert all Qu with Jf devices to the new config table
...
Add new generic iwl_trans structures for these devices and apply the
correct cfg depending on the device characteristics.
Since we have to match Qu with IWL_CONFIG_ANY, we also need to move
the Hr devices to the new table, but for now we keep matching on PCI
device and subsystem device IDs.
Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:48 +02:00
be2f6886a3
iwlwifi: add HW step to new cfg device table
...
We need to use different firmware versions for different HW steps with
certain devices. Prepare for this differentiation by adding HW step
to the new device table.
Change-Id: Ib1afb7b0c89e9dc2d26e6d32ea19e978c17ba1dd
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:48 +02:00
c990fb19f5
iwlwifi: remove some unused extern declarations from iwl-config.h
...
After the refactoring, a few extern declarations were accidentally
left in the iwl-config.h file. Remove them
Change-Id: I79745e440ed5a0a90db61b0daaae374ecef09e86
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:48 +02:00
7897dfa2bc
iwlwifi: move integrated, extra_phy and soc_latency to trans_cfg
...
These values are selected based on the PCI device ID, so the decision
to use them can be made early. By moving them to the trans_cfg, we
avoid duplicating the large cfg structs for small pieces of
data (sometimes a single boolean). This will also allow us to make
more decisions based on, for instance, the SoC type in used.
The trans_cfg concept changes a bit, because previously it was used
only to boot the device before reading further characteristics and now
it also contains more data that is associated with the device ID.
Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-03-27 08:12:48 +02:00
5e003982b0
iwlwifi: move AX200 devices to the new table
...
Move the AX200 devices to the new table and add the appropriate cfg
struct and strings.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fdfa5f31b8b1.Idfd28829d9f3820de06d3bba8fa66048b8d0d0b0@changeid
2020-03-17 21:10:47 +02:00
c8685937d0
iwlwifi: move pu devices to new table
...
All the pu devices can now be differentiated using the new
parameters, so move them all to the new tables accordingly.
This also includes removal of a few deprecated IDs and redundant cfg
structs.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.e7dc61e665f3.I44dcf9195bb8cc9e8c8e3e87182e9185c819a99d@changeid
2020-03-17 21:10:46 +02:00
55cf5fb9ff
iwlwifi: convert the 9260-1x1 device to use the new parameters
...
The 9260-1x1 device can be differentiated using the PCI device ID.
There is a single occurrence of this device, so continue relying on
the device and subsystem device IDs.
The name of this device was incorrect, so add a new string
specifically for it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.4d74e1be7cac.Id27bd9c878b73cb771691cbe6082fd40e079b44d@changeid
2020-03-17 21:10:46 +02:00
fe25b1518f
iwlwifi: move TH1 devices to the new table
...
TH1 devices can now be fully differentiated by using the device
parameters we have (particularly the RF_TYPE). Start using these
parameters instead of hardcoding to specific subsystem device IDs.
This also fixes the name of one of the TH1 devices that was
erroneously using the 9260 struct and renames 9160 to 9162.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.18d4304b5454.Ib168d186da88393e9ec46f0fca523edb48d9138e@changeid
2020-03-17 21:10:46 +02:00
b200dba702
iwlwifi: map 9461 and 9462 using RF type and RF ID
...
These devices can be differentiated depending on the RF type and RF
ID. Change them to use these instead of relying on the subsystem
device IDs.
This also fixes some names that were not including 160MHz (as they
should).
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.345de1efb3ec.Ib9221027a955188ea7c1ffca8a45bccd6c1e6a13@changeid
2020-03-17 21:10:46 +02:00
f673a193d5
iwlwifi: add Pu/PnJ/Th device values to differentiate them
...
Pu, PnJ and Th devices have different combinations of PCI ID, MAC ID
and RF IDs. Use these to differentiate them and choose the correct
configuration.
This also includes a change from using soc cfg's for 0x2526
devices (PnJ/Th), which was incorrect.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.602bb33528cf.I3acacb07c69ed063c7f1ca78f2dce9b7b4ef3946@changeid
2020-03-17 21:10:45 +02:00
95939551e2
iwlwifi: add GNSS differentiation to the device tables
...
Devices that also include a GNSS module have different names, so add a
new device option to differentiate them, according to the values we
have in the modules section of the subsystem device ID.
Additionally, convert the two applicable devices to use this value
instead of hardcoded subsystem IDs.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.1f958e558d05.I45492bb57cbbeb4cc0ec84313bade4def7377a27@changeid
2020-03-17 21:10:45 +02:00
d6f2134a38
iwlwifi: add mac/rf types and 160MHz to the device tables
...
Add MAC ID, RF ID and the bit that tells us whether the device can
handle 160MHz bandwidth to the device struct.
This allows us to chose the correct structure and string depending on
these parameters. Do so for all the 0x2526 devices we already moved
to the new table.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.a6bef6ee8fe1.I01f7a6f49aa60d2d61633a8a8b859015681eac5b@changeid
2020-03-17 21:10:45 +02:00
56ba371a52
iwlwifi: move the remaining 0x2526 configs to the new table
...
Now that we have the strings separate from the rest, we can move the
remaining 0x2526 devices to the new table in preparation to reuse the
configs.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.a7998f8d7507.I4be8776edb8c30416efc184c66f11add5eed06de@changeid
2020-03-17 21:10:45 +02:00
0b295a1eb8
iwlwifi: add device name to device_info
...
We have a lot of mostly duplicated data structures that are repeated
only because the device name string is different. To avoid this, move
the string from the cfg to the trans structure and add it
independently from the rest of the configuration to the PCI mapping
tables.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-01-04 12:48:41 +02:00
2a612a60ab
iwlwifi: implement a new device configuration table
...
Add a new device table that contains information that can be checked
at runtime in order to decide which configuration to use. This allows
us to map the full cfg independently from the tran-specific
configuration.
This is the first step in creating the new table. Subsequent patches
will add the possibility of checking different values at runtime in
order to make the decision.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com >
2020-01-04 12:47:49 +02:00
