IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support for LTC2991 Octal I2C Voltage, Current, and Temperature
Monitor.
The LTC2991 is used to monitor system temperatures, voltages and
currents. Through the I2C serial interface, the eight monitors can
individually measure supply voltages and can be paired for
differential measurements of current sense resistors or temperature
sensing transistors. Additional measurements include internal
temperature and internal VCC.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231026103413.27800-2-antoniu.miclaus@analog.com
[groeck: Fixed up documentation warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo
Järvinen, Bjorn Helgaas)
- Rework DPC control programming for clarity (Ilpo Järvinen)
* pci/field-get:
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk
PCI: Use FIELD_GET()
PCI/MSI: Use FIELD_GET/PREP()
PCI/DPC: Use defines with DPC reason fields
PCI/DPC: Use defined fields with DPC_CTL register
PCI/DPC: Use FIELD_GET()
PCI: hotplug: Use FIELD_GET/PREP()
PCI: dwc: Use FIELD_GET/PREP()
PCI: cadence: Use FIELD_GET()
PCI: Use FIELD_GET() to extract Link Width
PCI: mvebu: Use FIELD_PREP() with Link Width
PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields
# Conflicts:
# drivers/pci/controller/dwc/pcie-tegra194.c
- Simplify config accessor error checking (Ilpo Järvinen)
* pci/config-errs:
scsi: ipr: Do PCI error checks on own line
PCI: xgene: Do PCI error check on own line & keep return value
PCI: Do error check on own line to split long "if" conditions
atm: iphase: Do PCI error checks on own line
sh: pci: Do PCI error check on own line
alpha: Streamline convoluted PCI error handling
- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm
and xilinx-xdma (Thippeswamy Havalige)
- Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige)
* pci/controller/xilinx-xdma:
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
- Drop xilinx-nwl updates of bridge bus number fields, since PCI core
already does that (Thippeswamy Havalige)
- Update xilinx-nwl driver and ECAM size in devicetree example to allow up
to 256 buses (Thippeswamy Havalige)
* pci/controller/xilinx-ecam:
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
- Use PCIE_SPEED2MBS_ENC() macro in qcom host and endpoint to encode link
speed instead of hard-coding the link speed in MBps (Manivannan
Sadhasivam)
- Use Mbps_to_icc() (not MBps_to_icc()) in tegra194 instead of explicitly
doing the bytes-to-bits conversion (Manivannan Sadhasivam)
* pci/controller/speed:
PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed
PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
- Add generic T_PVPERL macro for the required interval between power being
stable and PERST# being inactive (Yoshihiro Shimoda)
- Factor out dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda)
- Update PCI_EXP_LNKCAP_MLW so Link Capabilities shows the correct max link
width (Yoshihiro Shimoda)
- Drop tegra194 PCI_EXP_LNKCAP_MLW setting since dw_pcie_setup() already
does it (Yoshihiro Shimoda)
- Add dwc support for different dbi and dbi2 register offsets, to be used
for R-Car Gen4 controllers (Yoshihiro Shimoda)
- Add EDMA_UNROLL capability flag for R-Car Gen4 controllers that don't
correctly advertise unrolled mapping via their eDMA CTRL register
(Yoshihiro Shimoda)
- Export dw_pcie_ep_exit() for use by the modular R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add .pre_init() and .deinit() hooks for use by R-Car Gen4 controllers
(Yoshihiro Shimoda)
- Increase snps,dw-pcie DT reg and reg-names maxItems for R-Car Gen4
controllers (Yoshihiro Shimoda)
- Add rcar-gen4-pci host and endpoint DT bindings and drivers (Yoshihiro
Shimoda)
- Add Renesas R8A779F0 Device ID to pci_endpoint_test to allow testing on
R-Car S4-8 (Yoshihiro Shimoda)
* pci/controller/rcar:
misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
PCI: rcar-gen4: Add endpoint mode support
PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
dt-bindings: PCI: dwc: Update maxItems of reg and reg-names
PCI: dwc: endpoint: Introduce .pre_init() and .deinit()
PCI: dwc: Expose dw_pcie_write_dbi2() to module
PCI: dwc: Expose dw_pcie_ep_exit() to module
PCI: dwc: Add EDMA_UNROLL capability flag
PCI: dwc: endpoint: Add multiple PFs support for dbi2
PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting
PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling
PCI: dwc: Add dw_pcie_link_set_max_link_width()
PCI: Add T_PVPERL macro
- Add pci_is_vga() helper, which checks for both PCI_CLASS_DISPLAY_VGA and
PCI_CLASS_NOT_DEFINED_VGA (which catches ancient devices built before
Class Codes were defined) (Sui Jingfeng)
- Use the new pci_is_vga() to identify devices for the VGA arbiter, the
sysfs "boot_vga" attribute, and the virtio and qxl drivers (SUi Jingfeng)
* pci/vga:
drm/qxl: Use pci_is_vga() to identify VGA devices
drm/virtio: Use pci_is_vga() to identify VGA devices
PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga()
PCI/VGA: Select VGA devices earlier
PCI/VGA: Use pci_is_vga() to identify VGA devices
PCI: Add pci_is_vga() helper
- Protect driver's D3cold preference from being overwritten by user space
via sysfs (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 to fix
wakeup by USB4-attached devices (Mario Limonciello)
* pci/pm:
x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
PCI/sysfs: Protect driver's D3cold preference from user space
- Move struct dev_pagemap (a flexible structure) to end of struct
pci_p2pdma_pagemap to avoid overwriting things after dev_pagemap
(Gustavo A. R. Silva)
* pci/p2pdma:
PCI/P2PDMA: Remove redundant goto
PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY
devices (Sui Jingfeng)
- Fix a vmd check for multi-function devices (Ilpo Järvinen)
- Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen)
- Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko)
- Keep .remove() and .probe() callbacks (previously marked __init) in case
they're used via sysfs (Uwe Kleine-König)
* pci/enumeration:
PCI: keystone: Don't discard .probe() callback
PCI: keystone: Don't discard .remove() callback
PCI: kirin: Don't discard .remove() callback
PCI: exynos: Don't discard .remove() callback
PCI/ACPI: Use acpi_evaluate_dsm_typed()
PCI: Use PCI_HEADER_TYPE_* instead of literals
PCI: Add PCI_HEADER_TYPE_MFD definition
PCI: vmd: Correct PCI Header Type Register's multi-function check
drm/radeon: Use pci_get_base_class() to reduce duplicated code
drm/amdgpu: Use pci_get_base_class() to reduce duplicated code
drm/nouveau: Use pci_get_base_class() to reduce duplicated code
ALSA: hda: Use pci_get_base_class() to reduce duplicated code
PCI: Add pci_get_base_class() helper
- Disable ATS for Intel IPU E2000 A- and B-stepping devices to avoid
invalidation message endianness erratum (Bartosz Pawlowski)
* pci/ats:
PCI: Disable ATS for specific Intel IPU E2000 devices
PCI: Extract ATS disabling to a helper function
* pci/aspm:
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"
PCI/ASPM: Convert printk() to pr_*() and add include
PCI/ASPM: Remove unnecessary includes
PCI/ASPM: Use FIELD_MAX() instead of literals
PCI/ASPM: Use time constants
PCI/ASPM: Return U32_MAX instead of bit magic construct
PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields
PCI: Add PCI_L1SS_CTL2 fields
- Fix a possible CPU hotplug deadlock bug caused by the new
TSC synchronization code.
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc.
- Add a new Intel CPU model number to <asm/intel-family.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k19e
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments.
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmU82MUbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMZ0H+wZHWVUsmqGLGNCt3gfi
m2EJX83VMwY8PzpwZ5ezrx4ibAcUyo7Dhh8OniGgEazC3BNeggoUu/HwpirS22gI
Tx0EMlgLOJQykauiUe6FPem0IbrlbQMI1gLplx6cVd8lgIYZQfMIM5gI0kuCywT3
Ka9sCgp6y3UKQNtHKFwtPRLYFTF3Afyy2C01wdsa800SEqeOAeTD9+8yz7ZnuFt+
bNgu6vJGFfJHkEkvYCwFFqZ1eIfXON6lUFpijNpCGvMN2h1XArLexSk8JRBf6j2+
8+1FrRQsTXRk3G6v9uQABeK7z5W2F8gufmSFyBlXajbZp2HT6j4s2S86u5lP9P9J
l1U=
=etyx
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=8Jfz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
Here are some very small driver fixes for 6.6-final that have shown up
in the past 2 weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZTy13A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykHzACdHeaGvszwWwcjHX0SmZBRNbHoj80AnRaM0RP0
SpAvYj7k79XtxOH0KTe0
=y5Zi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Plus, fixing an of node leak pattern in the mux subsystem.
-----BEGIN PGP SIGNATURE-----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=bIWp
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
The MAX31785 has shown erratic behaviour across multiple system
designs, unexpectedly clock stretching and NAKing transactions.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20231027044346.2167548-1-lakshmiy@us.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA237 "85-V, 16-Bit, Precision Power Monitor With I2C Interface" is
basically the same as INA328. Therefore add a corresponding compatible
to the driver.
According to the datasheet the main difference is the current and power
monitoring accuracy:
+------------------------+---------------+---------------+
| | INA238 | INA237 |
+------------------------+---------------+---------------+
| Offset voltage | +/- 5µV | +/- 50µV |
| Offset drift | +/- 0.02µV/°C | +/- 0.02µV/°C |
| Gain error | +/- 0.1% | +/- 0.3% |
| Gain error drift | +/- 25ppm/°C | +/- 50ppm/°C |
| Common mode rejection | 140dB | 120dB |
| Power accuracy | 0.7% | 1.6% |
+------------------------+---------------+---------------+
As well as the missing DEVICE_ID register at 0x3F, which is currently
not in use by the driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20231026-ina237-v2-1-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add ti,ina237 binding to ti,ina2xx as they are very similar and may
share the same properties.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231026-ina237-v2-2-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Only the temp sensors that I can verify are present.
T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.
The other sensors are as found on the X670E Hero.
Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add missing implementation for the max31827 supply regulator.
This is a hardware required property that is not handled.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230925122929.10610-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA3221 allows the Critical alert pin to be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to compare
the combined sum to the programmed limit. The Shunt-Voltage Sum Limit
register contains the programmed value that is compared to the value in
the Shunt-Voltage Sum register in order to determine if the total summed
limit is exceeded. If the shunt-voltage sum limit value is exceeded, the
Critical alert pin pulls low.
For the summation limit to have a meaningful value, we have to use the
same shunt-resistor value on all included channels. Unless equal
shunt-resistor values are used for each channel, the summation control
function cannot be used and it is not enabled by the driver.
To address this, add support to disable the summation of specific
channels via device tree property "ti,summation-disable". The channel
which has this property would be excluded from the calculation of
summation control function.
For example, summation control function calculates Shunt-Voltage Sum as:
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel2
+ input_shunt_voltage_channel3
If we want the summation to only use channel1 and channel3, we can add
'ti,summation-disable' property in device tree node for channel2. Then
the calculation will skip channel2.
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel3
Note that we only want the channel to be skipped for summation control
function rather than completely disabled. Therefore, even if we add the
property 'ti,summation-disable', the channel is still enabled and
functional.
Finally, create debugfs entries that display if summation is disabled
for each of the channels.
Signed-off-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Co-developed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230929103650.86074-4-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA3221 has a critical alert pin that can be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to
compare the combined sum to the programmed limit. The Shunt-Voltage
Sum Limit register contains the programmed value that is compared
to the value in the Shunt-Voltage Sum register in order to
determine if the total summed limit is exceeded. If the
shunt-voltage sum limit value is exceeded, the critical alert pin
pulls low.
For the summation limit to have a meaningful value, it is necessary
to use the same shunt-resistor value on all included channels. Add a new
vendor specific property, 'ti,summation-disable', to allow specific
channels to be excluded from the summation control function if the shunt
resistor is different to other channels or the channel should not be
considered for triggering the critical alert pin.
Note that the ina3221 has always supported summing the various input
channels and summation is enabled by default if the shunt-resistor
values are the same. This change simply provides a way to exclude
inputs from the summation. If this property is not populated, then the
functionality of the driver does not change.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929103650.86074-3-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the TI INA3221 bindings from the free-form text format to
json-schema.
Note that the INA3221 input channels default to enabled in the chip.
Unless channels are explicitly disabled in device-tree, input
channels will be enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929103650.86074-2-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MPQ2286 is a programmable, high frequency synchronous buck regulator
designed to power a variety of Automotive system peripherals. Single buck
converters with hardware monitoring capability is configurable over PMBus
interface.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-5-saravanan@linumiz.com
[groeck: Updated subject (mpq2286 -> mpq7932)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The bindings for single instance regulator should be named with no instance
(e.g., buck not buck0). Introduce a new helper macro to define the single pmbus
regulator.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-4-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Get page count using compatible match to support the series of chipsets
which differs in number of regualator/page.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-2-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These modify the corresponding bits in the configuration register.
adi,comp-int is a hardware property, because it affects the behavior
of the interrupt signal and whatever it is connected to.
adi,timeout-enable is a hardware property, because it affects i2c
bus operation.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230919093456.10592-3-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is nothing in the datasheet indicating that the 1ms error is
needed and I didn't encounter any error during testing with 140ms wait
time.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Used enums and while loops to replace switch for selecting and getting
update interval from conversion rate bits.
Divided the write_alarm_val function into 2 functions. The new function
is more generic: it can be used not only for alarm writes, but for any
kind of writes which require the device to be in shutdown mode.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-1-daniel.matyas@analog.com
[groeck: Reverted error return value change (EOPNOTSUPP -> EINVAL)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As he is the submitter of this driver, add his mail so he can
maintain the driver and easily reply in the mailing list.
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230928075249.109459-1-hal.feng@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
