437b6b3536
2882 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Walleij
|
437b6b3536
|
parisc: Use the generic IO helpers
This enables the parisc to use <asm-generic/io.h> to fill in the missing (undefined) [read|write]sq I/O accessor functions. This is needed if parisc[64] ever wants to uses CONFIG_REGMAP_MMIO which has been patches to use accelerated _noinc accessors such as readsq/writesq that parisc64, while being a 64bit platform, as of now not yet provide. This comes with the requirement that everything the architecture already provides needs to be defined, rather than just being, say, static inline functions. Bite the bullet and just provide the definitions and make it work. Compile-tested on parisc32 and parisc64. Drop some of the __raw functions that now get implemented in <asm-generic/io.h>. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Mark Brown <broonie@kernel.org> Cc: John David Anglin <dave.anglin@bell.net> Link: https://lore.kernel.org/linux-arm-kernel/62fcc351.hAyADB%2FY8JTxz+kh%25lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Walleij
|
77bfc8bdb5
|
parisc: Remove 64bit access on 32bit machines
The parisc was using some readq/writeq accessors without special considerations as to what will happen on 32bit CPUs if you do this. Maybe we have been lucky that it "just worked" on 32bit due to the compiler behaviour, or the code paths were never executed. Fix the two offending code sites like this: arch/parisc/lib/iomap.c: - Put ifdefs around the 64bit accessors and make sure that ioread64, ioread64be, iowrite64 and iowrite64be are not available on 32bit builds. - Also fold in a bug fix where 64bit access was by mistake using 32bit writel() accessors rather than 64bit writeq(). drivers/parisc/sba_iommu.c: - Access any 64bit registers using _lo_hi-semantics by way of the readq and writeq operations provided by <linux/io-64-nonatomic-lo-hi.h> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: John David Anglin <dave.anglin@bell.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Helge Deller
|
591d2108f3 |
parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines
If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x machine is detected. Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
b4b18f47f4 |
Revert "parisc: Show error if wrong 32/64-bit compiler is being used"
This reverts commit
|
||
|
Helge Deller
|
3dcfb729b5 |
parisc: Make CONFIG_64BIT available for ARCH=parisc64 only
With this patch the ARCH= parameter decides if the CONFIG_64BIT option will be set or not. This means, the ARCH= parameter will give: ARCH=parisc -> 32-bit kernel ARCH=parisc64 -> 64-bit kernel This simplifies the usage of the other config options like randconfig, allmodconfig and allyesconfig a lot and produces the output which is expected for parisc64 (64-bit) vs. parisc (32-bit). Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> # 5.15+ |
||
|
Helge Deller
|
7ae1f5508d |
parisc: Fix exception handler for fldw and fstw instructions
The exception handler is broken for unaligned memory acceses with fldw and fstw instructions, because it trashes or uses randomly some other floating point register than the one specified in the instruction word on loads and stores. The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw instructions) encode the target register (%fr22) in the rightmost 5 bits of the instruction word. The 7th rightmost bit of the instruction word defines if the left or right half of %fr22 should be used. While processing unaligned address accesses, the FR3() define is used to extract the offset into the local floating-point register set. But the calculation in FR3() was buggy, so that for example instead of %fr22, register %fr12 [((22 * 2) & 0x1f) = 12] was used. This bug has been since forever in the parisc kernel and I wonder why it wasn't detected earlier. Interestingly I noticed this bug just because the libime debian package failed to build on *native* hardware, while it successfully built in qemu. This patch corrects the bitshift and masking calculation in FR3(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> |
||
Linus Torvalds
|
eb5699ba31 |
Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9 kwS/13j38guulSlXRzDLmitbg81zAAI= =Zfum -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ... |
||
|
Linus Torvalds
|
6614a3c316 |
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
||
|
Linus Torvalds
|
3bd6e5854b |
asm-generic: updates for 6.0
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----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=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
||
|
Linus Torvalds
|
8db4a0291b |
parisc architecture fixes and updates for kernel v5.20-rc1:
One real bugfix to change the io_pgetevents_time64() syscall to use the compat implementation when running in compat mode, otherwise the signed int32 parameters min_nr and nr will be incorrectly handled as unsigned int64 values. Other than that just small cleanups: * hardware database housekeeping and proper /proc/iomem output * add proper function exit code if probe functions fail * drop stale variables (pa_swapper_pg_lock) * drop unneccessary zero-initializations * typo fixes in comments -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYu07ZwAKCRD3ErUQojoP XxlBAQDqaNvhiTfiyXD14B6DVoW4BK8anI/JFEbzD91oi8zGdAD9FktmLk5BLsY7 iMc4SCr79IM29AUdcbqC6mK2zNJ2uQA= =lshT -----END PGP SIGNATURE----- Merge tag 'for-5.20/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "One real bugfix to change the io_pgetevents_time64() syscall to use the compat implementation when running in compat mode, otherwise the signed int32 parameters min_nr and nr will be incorrectly handled as unsigned int64 values. Other than that just small cleanups: - hardware database housekeeping and proper /proc/iomem output - add proper function exit code if probe functions fail - drop stale variables (pa_swapper_pg_lock) - drop unneccessary zero-initializations - typo fixes in comments" * tag 'for-5.20/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: Input: gscps2 - check return value of ioremap() in gscps2_probe() parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode parisc: Drop zero variable initialisations in mm/init.c parisc: Do not initialise statics to 0 parisc: Check the return value of ioremap() in lba_driver_probe() parisc: Drop pa_swapper_pg_lock spinlock parisc: Fix comment typo in fault.c parisc: Fix device names in /proc/iomem parisc: Clean up names in hardware database |
||
|
Linus Torvalds
|
eff0cb3d91 |
pci-v5.20-changes
-----BEGIN PGP SIGNATURE-----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=9TAR
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
||
|
Linus Torvalds
|
353767e4aa |
for-5.20-tag
-----BEGIN PGP SIGNATURE-----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=sS1q
-----END PGP SIGNATURE-----
Merge tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings some long awaited changes, the send protocol bump,
otherwise lots of small improvements and fixes. The main core part is
reworking bio handling, cleaning up the submission and endio and
improving error handling.
There are some changes outside of btrfs adding helpers or updating
API, listed at the end of the changelog.
Features:
- sysfs:
- export chunk size, in debug mode add tunable for setting its size
- show zoned among features (was only in debug mode)
- show commit stats (number, last/max/total duration)
- send protocol updated to 2
- new commands:
- ability write larger data chunks than 64K
- send raw compressed extents (uses the encoded data ioctls),
ie. no decompression on send side, no compression needed on
receive side if supported
- send 'otime' (inode creation time) among other timestamps
- send file attributes (a.k.a file flags and xflags)
- this is first version bump, backward compatibility on send and
receive side is provided
- there are still some known and wanted commands that will be
implemented in the near future, another version bump will be
needed, however we want to minimize that to avoid causing
usability issues
- print checksum type and implementation at mount time
- don't print some messages at mount (mentioned as people asked about
it), we want to print messages namely for new features so let's
make some space for that
- big metadata - this has been supported for a long time and is
not a feature that's worth mentioning
- skinny metadata - same reason, set by default by mkfs
Performance improvements:
- reduced amount of reserved metadata for delayed items
- when inserted items can be batched into one leaf
- when deleting batched directory index items
- when deleting delayed items used for deletion
- overall improved count of files/sec, decreased subvolume lock
contention
- metadata item access bounds checker micro-optimized, with a few
percent of improved runtime for metadata-heavy operations
- increase direct io limit for read to 256 sectors, improved
throughput by 3x on sample workload
Notable fixes:
- raid56
- reduce parity writes, skip sectors of stripe when there are no
data updates
- restore reading from on-disk data instead of using stripe cache,
this reduces chances to damage correct data due to RMW cycle
- refuse to replay log with unknown incompat read-only feature bit
set
- zoned
- fix page locking when COW fails in the middle of allocation
- improved tracking of active zones, ZNS drives may limit the
number and there are ENOSPC errors due to that limit and not
actual lack of space
- adjust maximum extent size for zone append so it does not cause
late ENOSPC due to underreservation
- mirror reading error messages show the mirror number
- don't fallback to buffered IO for NOWAIT direct IO writes, we don't
have the NOWAIT semantics for buffered io yet
- send, fix sending link commands for existing file paths when there
are deleted and created hardlinks for same files
- repair all mirrors for profiles with more than 1 copy (raid1c34)
- fix repair of compressed extents, unify where error detection and
repair happen
Core changes:
- bio completion cleanups
- don't double defer compression bios
- simplify endio workqueues
- add more data to btrfs_bio to avoid allocation for read requests
- rework bio error handling so it's same what block layer does,
the submission works and errors are consumed in endio
- when asynchronous bio offload fails fall back to synchronous
checksum calculation to avoid errors under writeback or memory
pressure
- new trace points
- raid56 events
- ordered extent operations
- super block log_root_transid deprecated (never used)
- mixed_backref and big_metadata sysfs feature files removed, they've
been default for sufficiently long time, there are no known users
and mixed_backref could be confused with mixed_groups
Non-btrfs changes, API updates:
- minor highmem API update to cover const arguments
- switch all kmap/kmap_atomic to kmap_local
- remove redundant flush_dcache_page()
- address_space_operations::writepage callback removed
- add bdev_max_segments() helper"
* tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits)
btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read
btrfs: fix repair of compressed extents
btrfs: remove the start argument to check_data_csum and export
btrfs: pass a btrfs_bio to btrfs_repair_one_sector
btrfs: simplify the pending I/O counting in struct compressed_bio
btrfs: repair all known bad mirrors
btrfs: merge btrfs_dev_stat_print_on_error with its only caller
btrfs: join running log transaction when logging new name
btrfs: simplify error handling in btrfs_lookup_dentry
btrfs: send: always use the rbtree based inode ref management infrastructure
btrfs: send: fix sending link commands for existing file paths
btrfs: send: introduce recorded_ref_alloc and recorded_ref_free
btrfs: zoned: wait until zone is finished when allocation didn't progress
btrfs: zoned: write out partially allocated region
btrfs: zoned: activate necessary block group
btrfs: zoned: activate metadata block group on flush_space
btrfs: zoned: disable metadata overcommit for zoned
btrfs: zoned: introduce space_info->active_total_bytes
btrfs: zoned: finish least available block group on data bg allocation
btrfs: let can_allocate_chunk return error
...
|
||
|
Linus Torvalds
|
9de1f9c8ca |
Updates for interrupt core and drivers:
core:
- Fix a few inconsistencies between UP and SMP vs. interrupt affinities
- Small updates and cleanups all over the place
drivers:
- New driver for the LoongArch interrupt controller
- New driver for the Renesas RZ/G2L interrupt controller
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual
-----BEGIN PGP SIGNATURE-----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=OnhF
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
|
||
|
Linus Torvalds
|
22a39c3d86 |
This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives
that can lose the lock_type & cause false reports. No such mishap was
observed in the wild.
- jump_label improvements: simplify the cross-arch support of
initial NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4B89
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
|
||
|
Helge Deller
|
6431e92fc8 |
parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
For all syscalls in 32-bit compat mode on 64-bit kernels the upper 32-bits of the 64-bit registers are zeroed out, so a negative 32-bit signed value will show up as positive 64-bit signed value. This behaviour breaks the io_pgetevents_time64() syscall which expects signed 64-bit values for the "min_nr" and "nr" parameters. Fix this by switching to the compat_sys_io_pgetevents_time64() syscall, which uses "compat_long_t" types for those parameters. Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Helge Deller <deller@gmx.de> |
||
Jason Wang
|
cbe263b6b0 |
parisc: Drop zero variable initialisations in mm/init.c
Initialise global and static variable to 0 is always unnecessary. Remove the unnecessary initialisations. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Helge Deller <deller@gmx.de> |
||
Xin Gao
|
b9e28d3c24 |
parisc: Do not initialise statics to 0
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
3fbc9a7de0 |
parisc: Drop pa_swapper_pg_lock spinlock
This spinlock was dropped with commit
|
||
|
Jason Wang
|
16bf37bf49 |
parisc: Fix comment typo in fault.c
The double `the' is duplicated in line 41, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
cab56b51ec |
parisc: Fix device names in /proc/iomem
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
|
||
|
Helge Deller
|
b383d94ad7 |
parisc: Clean up names in hardware database
Stop guessing and just use the names for the hardware we know so far. Signed-off-by: Helge Deller <deller@gmx.de> |
||
Ben Dooks
|
787dbea11a |
profile: setup_profiling_timer() is moslty not implemented
The setup_profiling_timer() is mostly un-implemented by many architectures. In many places it isn't guarded by CONFIG_PROFILE which is needed for it to be used. Make it a weak symbol in kernel/profile.c and remove the 'return -EINVAL' implementations from the kenrel. There are a couple of architectures which do return 0 from the setup_profiling_timer() function but they don't seem to do anything else with it. To keep the /proc compatibility for now, leave these for a future update or removal. On ARM, this fixes the following sparse warning: arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Fabio M. De Francesco
|
39ade048a3 |
highmem: Make __kunmap_{local,atomic}() take const void pointer
__kunmap_ {local,atomic}() currently take pointers to void. However, this
is semantically incorrect, since these functions do not change the memory
their arguments point to.
Therefore, make this semantics explicit by modifying the
__kunmap_{local,atomic}() prototypes to take pointers to const void.
As a side effect, compilers may produce more efficient code.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Suggested-by: David Sterba <dsterba@suse.cz>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Stafford Horne
|
abb4970ac3 |
PCI: Move isa_dma_bridge_buggy out of asm/dma.h
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it. Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0 except on x86_32, where we keep it as a variable, and remove all the arch- specific definitions. [bhelgaas: commit log] Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Stafford Horne
|
ae85b23c65 |
PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
pci_get_legacy_ide_irq() is only used on platforms that support PNP, so many architectures define it but never use it. Replace uses of it with ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ(), which provide the same functionality. Since pci_get_legacy_ide_irq() is no longer used, remove all the architecture-specific definitions of it as well as asm-generic/pci.h, which only provides pci_get_legacy_ide_irq() [bhelgaas: commit log] Co-developed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220722214944.831438-2-shorne@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Mike Rapoport
|
4501a7a039 |
parisc: rename PGD_ORDER to PGD_TABLE_ORDER
This is the order of the page table allocation, not the order of a PGD. Link: https://lkml.kernel.org/r/20220703141203.147893-14-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Xuerui Wang <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Anshuman Khandual
|
3d923c5f1e |
mm/mmap: drop ARCH_HAS_VM_GET_PAGE_PROT
Now all the platforms enable ARCH_HAS_GET_PAGE_PROT. They define and export own vm_get_page_prot() whether custom or standard DECLARE_VM_GET_PAGE_PROT. Hence there is no need for default generic fallback for vm_get_page_prot(). Just drop this fallback and also ARCH_HAS_GET_PAGE_PROT mechanism. Link: https://lkml.kernel.org/r/20220711070600.2378316-27-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Anshuman Khandual
|
252358f1a1 |
parisc/mm: enable ARCH_HAS_VM_GET_PAGE_PROT
This enables ARCH_HAS_VM_GET_PAGE_PROT on the platform and exports standard vm_get_page_prot() implementation via DECLARE_VM_GET_PAGE_PROT, which looks up a private and static protection_map[] array. Subsequently all __SXXX and __PXXX macros can be dropped which are no longer needed. Link: https://lkml.kernel.org/r/20220711070600.2378316-14-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Samuel Holland
|
073352e951 |
genirq: Add and use an irq_data_update_affinity helper
Some architectures and irqchip drivers modify the cpumask returned by irq_data_get_affinity_mask, usually by copying in to it. This is problematic for uniprocessor configurations, where the affinity mask should be constant, as it is known at compile time. Add and use a setter for the affinity mask, following the pattern of irq_data_update_effective_affinity. This allows the getter function to return a const cpumask pointer. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Xen bits Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701200056.46555-7-samuel@sholland.org |
||
|
Helge Deller
|
aa78fa905b |
parisc: Fix vDSO signal breakage on 32-bit kernel
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc
signal testcases on a 32-bit kernel.
The trampoline code (sigtramp.S) which is mapped into userspace includes
an offset to the context data on the stack, which is used by gdb and
glibc to get access to registers.
In a 32-bit kernel we used by mistake the offset into the compat context
(which is valid on a 64-bit kernel only) instead of the offset into the
"native" 32-bit context.
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Fixes:
|
||
Arnd Bergmann
|
4313a24985 |
arch/*/: remove CONFIG_VIRT_TO_BUS
All architecture-independent users of virt_to_bus() and bus_to_virt() have been fixed to use the dma mapping interfaces or have been removed now. This means the definitions on most architectures, and the CONFIG_VIRT_TO_BUS symbol are now obsolete and can be removed. The only exceptions to this are a few network and scsi drivers for m68k Amiga and VME machines and ppc32 Macintosh. These drivers work correctly with the old interfaces and are probably not worth changing. On alpha and parisc, virt_to_bus() were still used in asm/floppy.h. alpha can use isa_virt_to_bus() like x86 does, and parisc can just open-code the virt_to_phys() here, as this is architecture specific code. I tried updating the bus-virt-phys-mapping.rst documentation, which started as an email from Linus to explain some details of the Linux-2.0 driver interfaces. The bits about virt_to_bus() were declared obsolete backin 2000, and the rest is not all that relevant any more, so in the end I just decided to remove the file completely. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Helge Deller
|
96b80fcd27 |
parisc/unaligned: Fix emulate_ldw() breakage
The commit |
||
akpm
|
46a3b11253 | Merge branch 'master' into mm-stable | ||
|
Helge Deller
|
0a1355db36 |
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes patch_map() to return an alias mapping to the to-be-patched code in order to prevent writing to write-protected memory. Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v5.2+ Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/ |
||
John David Anglin
|
e9ed22e6e5 |
parisc: Fix flush_anon_page on PA8800/PA8900
Anonymous pages are allocated with the shared mappings colouring, SHM_COLOUR. Since the alias boundary on machines with PA8800 and PA8900 processors is unknown, flush_user_cache_page() might not flush all mappings of a shared anonymous page. Flushing the whole data cache flushes all mappings. This won't fix all coherency issues with shared mappings but it seems to work well in practice. I haven't seen any random memory faults in almost a month on a rp3440 running as a debian buildd machine. There is a small preformance hit. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.18+ |
||
Jiang Jian
|
d16c5c7c92 |
parisc: align '*' in comment in math-emu code
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Helge Deller <deller@gmx.de> |
||
Ard Biesheuvel
|
7e6b9db27d |
jump_label: make initial NOP patching the special case
Instead of defaulting to patching NOP opcodes at init time, and leaving it to the architectures to override this if this is not needed, switch to a model where doing nothing is the default. This is the common case by far, as only MIPS requires NOP patching at init time. On all other architectures, the correct encodings are emitted by the compiler and so no initial patching is needed. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220615154142.1574619-4-ardb@kernel.org |
||
Peter Xu
|
d92725256b |
mm: avoid unnecessary page fault retires on shared memory types
I observed that for each of the shared file-backed page faults, we're very likely to retry one more time for the 1st write fault upon no page. It's because we'll need to release the mmap lock for dirty rate limit purpose with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()). Then after that throttling we return VM_FAULT_RETRY. We did that probably because VM_FAULT_RETRY is the only way we can return to the fault handler at that time telling it we've released the mmap lock. However that's not ideal because it's very likely the fault does not need to be retried at all since the pgtable was well installed before the throttling, so the next continuous fault (including taking mmap read lock, walk the pgtable, etc.) could be in most cases unnecessary. It's not only slowing down page faults for shared file-backed, but also add more mmap lock contention which is in most cases not needed at all. To observe this, one could try to write to some shmem page and look at "pgfault" value in /proc/vmstat, then we should expect 2 counts for each shmem write simply because we retried, and vm event "pgfault" will capture that. To make it more efficient, add a new VM_FAULT_COMPLETED return code just to show that we've completed the whole fault and released the lock. It's also a hint that we should very possibly not need another fault immediately on this page because we've just completed it. This patch provides a ~12% perf boost on my aarch64 test VM with a simple program sequentially dirtying 400MB shmem file being mmap()ed and these are the time it needs: Before: 650.980 ms (+-1.94%) After: 569.396 ms (+-1.38%) I believe it could help more than that. We need some special care on GUP and the s390 pgfault handler (for gmap code before returning from pgfault), the rest changes in the page fault handlers should be relatively straightforward. Another thing to mention is that mm_account_fault() does take this new fault as a generic fault to be accounted, unlike VM_FAULT_RETRY. I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping them as-is. Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vineet Gupta <vgupta@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part] Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Brian Cain <bcain@quicinc.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Will Deacon <will@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Simek <monstr@monstr.eu> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: David Hildenbrand <david@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Chris Zankel <chris@zankel.net> Cc: Hugh Dickins <hughd@google.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Sebastian Andrzej Siewior
|
f2c5092190 |
arch/*: Disable softirq stacks on PREEMPT_RT.
PREEMPT_RT preempts softirqs and the current implementation avoids do_softirq_own_stack() and only uses __do_softirq(). Disable the unused softirqs stacks on PREEMPT_RT to save some memory and ensure that do_softirq_own_stack() is not used bwcause it is not expected. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Helge Deller
|
1d0811b03e |
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
Fix this build error noticed by the kernel test robot: drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device' arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device' Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org # v5.10+ |
||
|
Linus Torvalds
|
71e80720db |
Kbuild updates for v5.19 (2nd)
- Fix build regressions for parisc, csky, nios2, openrisc - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT - Remove arch/parisc/nm, which was presumably a workaround for old tools - Check the odd combination of EXPORT_SYMBOL and 'static' precisely - Make external module builds robust against "too long argument error" - Support j, k keys for moving the cursor in nconfig -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmKbzrkVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsG4pEP/Ra691JLoNI8FdENI41mkv4gVBCP b3/7t/maaBpp9vEjoY3fSHwPTilBCFuSt50+QHvJDR2mckyFo6Vd4JLS7c3gfJkm JIyGodXYDE4RMQVZWjfjS2bTr7fnGOm9CxYgeJK4Js4dGeVhNN9OsWqmmoKKAtXt P9YL5jKTEPRO2IKdx38d3InJeufG6AsrbRe88H9XXy6gR6g49ZWKe8QB+VcNehm5 ZknWE+qLAmiXBGgsjwofOVU09wGuh8izf4/B+0S+HSvc1H3hdizYp+wVvBdwZ6co 3iqwh2fFZKMfL6n8pnmvf3Hl65SWMm40f9HmpScnErUUTUoEvHv53kvGp0d5m219 aRtbFF8HyVrvDmlR7GaaeiQja5Q1bT2ayjcmlVcNZ+gfvDId1nqqXO5SxBFn44hR e8KCOiGTOFswxV0vJLpUQrFuYkS8mvhm7NdaOZRYcvxnKHbN6ToKo6LS57j2Os5L bWFiNyk/oIUxN+9Lba0TqFbVuZazLBkNAjNsCalvosKIVXsZiFqOAdDytiUbCZmn vUvEe99Tr0ozRlAwZQtvLrL5Jdaxn9tv9ZDW8JRr3Xxku5wQN244+BOJBJV27wWw 0SkElgA979wJtMfwa/hm2WgSIxX6DESUaX6jzpi0hFNDLDUL25Kua8NeU/Z9UNrF 9tTys21exuDtjwy4 =BaLT -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - Fix build regressions for parisc, csky, nios2, openrisc - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT - Remove arch/parisc/nm, which was presumably a workaround for old tools - Check the odd combination of EXPORT_SYMBOL and 'static' precisely - Make external module builds robust against "too long argument error" - Support j, k keys for moving the cursor in nconfig * tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: Allow to select bash in a modified environment scripts: kconfig: nconf: make nconfig accept jk keybindings modpost: use fnmatch() to simplify match() modpost: simplify mod->name allocation kbuild: factor out the common objtool arguments kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o kbuild: clean .tmp_* pattern by make clean kbuild: remove redundant cleanups in scripts/link-vmlinux.sh kbuild: rebuild multi-object modules when objtool is updated kbuild: add cmd_and_savecmd macro kbuild: make *.mod rule robust against too long argument error kbuild: make built-in.a rule robust against too long argument error kbuild: check static EXPORT_SYMBOL* by script instead of modpost parisc: remove arch/parisc/nm kbuild: do not create *.prelink.o for Clang LTO or IBT kbuild: replace $(linked-object) with CONFIG options kbuild: do not try to parse *.cmd files for objects provided by compiler kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost modpost: squash if...else-if in find_elf_symbol2() modpost: reuse ARRAY_SIZE() macro for section_mismatch() ... |
||
|
Linus Torvalds
|
23df9ba64b |
parisc architecture fixes & updates for kernel v5.19-rc1
A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and add auto-detection of primary graphics card for framebuffer driver. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYptoPQAKCRD3ErUQojoP X1MbAQDP86+7VP8vVFDoEx+apgD/r9+53Gb0Ud6ZZ6MbrwIjEAD/Ys1V1X/AjWa7 ZkbBzRqPhHFRvx9sBUU537HaCem08Ak= =kBc2 -----END PGP SIGNATURE----- Merge tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc architecture updates from Helge Deller: "A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and add auto-detection of primary graphics card for framebuffer driver" * tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/stifb: Keep track of hardware path of graphics card parisc/stifb: Implement fb_is_primary_device() parisc: fix a crash with multicore scheduler |
||
|
Helge Deller
|
cf936af790 |
parisc/stifb: Implement fb_is_primary_device()
Implement fb_is_primary_device() function, so that fbcon detects if this framebuffer belongs to the default graphics card which was used to start the system. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.10+ |
||
|
Linus Torvalds
|
1ec6574a3c |
This set of changes updates init and user mode helper tasks to be
ordinary user mode tasks. In commit |
||
|
Linus Torvalds
|
932c2989b5 |
TTY / Serial driver changes for 5.19-rc1
Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed
change that goes a long way to making things simpler for all
of the different arches
- tty documentation cleanups and movements to their own place in
the documentation tree
- old tty driver cleanups and fixes from Jiri to bring some
existing drivers into the modern world
- RS485 cleanups and unifications to make it easier for
individual drivers to support this mode instead of having to
duplicate logic in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpndTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykFegCgizjLDyOepr72zMDWWdp0bBTekz8AoMWODfJY
vB8/kzu329DImJMFB8ET
=rmv0
-----END PGP SIGNATURE-----
Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
|
||
Mikulas Patocka
|
6ba6883648 |
parisc: fix a crash with multicore scheduler
With the kernel 5.18, the system will hang on boot if it is compiled with CONFIG_SCHED_MC. The last printed message is "Brought up 1 node, 1 CPU". The crash happens in sd_init tl->mask (which is cpu_coregroup_mask) returns an empty mask. This happens because cpu_topology[0].core_sibling is empty. Consequently, sd_span is set to an empty mask sd_id = cpumask_first(sd_span) sets sd_id == NR_CPUS (because the mask is empty) sd->shared = *per_cpu_ptr(sdd->sds, sd_id); sets sd->shared to NULL because sd_id is out of range atomic_inc(&sd->shared->ref); crashes without printing anything We can fix it by calling reset_cpu_topology() from init_cpu_topology() - this will initialize the sibling masks on CPUs, so that they're not empty. This patch also removes the variable "dualcores_found", it is useless, because during boot, init_cpu_topology is called before store_cpu_topology. Thus, set_sched_topology(parisc_mc_topology) is never called. We don't need to call it at all because default_topology in kernel/sched/topology.c contains the same items as parisc_mc_topology. Note that we should not call store_cpu_topology() from init_per_cpu() because it is called too early in the kernel initialization process and it results in the message "Failure to register CPU0 device". Before this patch, store_cpu_topology() would exit immediatelly because cpuid_topo->core id was uninitialized and it was 0. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v5.18 Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Linus Torvalds
|
35b51afd23 |
RISC-V Patches for the 5.19 Merge Window, Part 1
* Support for the Svpbmt extension, which allows memory attributes to be encoded in pages. * Support for the Allwinner D1's implementation of page-based memory attributes. * Support for running rv32 binaries on rv64 systems, via the compat subsystem. * Support for kexec_file(). * Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well. * A handful of cleanups and fixes, include some larger ones around atomics and XIP. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmKWOx8THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYieAiEADAUdP7ctoaSQwk5skd/fdA3b4KJuKn 1Zjl+Br32WP0DlbirYBYWRUQZnCCsvABbTiwSJMcG7NBpU5pyQ5XDtB3OA5kJswO Fdp8Nd53//+GK1M5zdEM9OdgvT9fbfTZ3qTu8bKsROOQhGwnYL+Csc9KjFRqEmzN oQii0jlb3n5PM4FL3GsbV4uMn9zzkP9mnVAPQktcock2EKFEK/Fy3uNYMQiO2KPi n8O6bIDaeRdQ6SurzWOuOkt0cro0tEF85ilzT04mynQsOU0el5oGqCxnOhNH3VWg ndqPT6Yafw12hZOtbKJeP+nF8IIR6aJLP3jOtRwEVgcfbXYAw4QwbAV8kQZISefN ipn8JGY7GX9Y9TYU692OUGkcmAb3/dxb6c0WihBdvJ0M6YyLD5X+YKHNuG2onLgK ss43C5Mxsu629rsjdu/PV91B1+pve3rG9siVmF+g4eo0x9rjMq6/JB0Kal/8SLI1 Je5T55d5ujV1a2XxhZLQOSD5owrK7J1M9owb0bloTnr9nVwFTWDrfEQEU82o3kP+ Xm+FfXktnz9ai55NjkMbbEur5D++dKJhBavwCTnBcTrJmMtEH0R45GTK9ZehP+WC rNVrRXjIsS18wsTfJxnkZeFQA38as6VBKTzvwHvOgzTrrZU1/xk3lpkouYtAO6BG gKacHshVilmUuA== =Loi6 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the Svpbmt extension, which allows memory attributes to be encoded in pages - Support for the Allwinner D1's implementation of page-based memory attributes - Support for running rv32 binaries on rv64 systems, via the compat subsystem - Support for kexec_file() - Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well - A handful of cleanups and fixes, include some larger ones around atomics and XIP * tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add] riscv: compat: Using seperated vdso_maps for compat_vdso_info RISC-V: Fix the XIP build RISC-V: Split out the XIP fixups into their own file RISC-V: ignore xipImage RISC-V: Avoid empty create_*_mapping definitions riscv: Don't output a bogus mmu-type on a no MMU kernel riscv: atomic: Add custom conditional atomic operation implementation riscv: atomic: Optimize dec_if_positive functions riscv: atomic: Cleanup unnecessary definition RISC-V: Load purgatory in kexec_file RISC-V: Add purgatory RISC-V: Support for kexec_file on panic RISC-V: Add kexec_file support RISC-V: use memcpy for kexec_file mode kexec_file: Fix kexec_file.c build error for riscv platform riscv: compat: Add COMPAT Kbuild skeletal support riscv: compat: ptrace: Add compat_arch_ptrace implement riscv: compat: signal: Add rt_frame implementation riscv: add memory-type errata for T-Head ... |
||
|
Linus Torvalds
|
e11a93567d |
parisc architecture updates for kernel v5.19-rc1
Minor cleanups and code optimizations, e.g.: - improvements in assembly statements in the tmpalias code path, - added some additionals compile time checks, - drop some unneccesary assembler DMA syncs. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYpUMsgAKCRD3ErUQojoP X/fNAQDGddN79CH+bABo6gq8dN/ko0NxxfJapAoPYEEZrKaFtwEA7FUZMfQqBVnm z+aSkbH6igueqxRCmbiW1OZ10KLwSgg= =SfFN -----END PGP SIGNATURE----- Merge tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: "Minor cleanups and code optimizations, e.g.: - improvements in assembly statements in the tmpalias code path - added some additionals compile time checks - drop some unneccesary assembler DMA syncs" * tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT parisc: Optimize tmpalias function calls parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels parisc: Fix wrong comment for shr macro parisc: Prevent ldil() to sign-extend into upper 32 bits parisc: Don't hardcode assembler bit definitions in tmpalias code parisc: Don't enforce DMA completion order in cache flushes parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font |
||
|
Linus Torvalds
|
1ff7bc3ba7 |
More power management updates for 5.19-rc1
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
||
|
Helge Deller
|
72acadfeb3 |
parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
Those old syscalls aren't exported via our syscall table, so just drop them. Signed-off-by: Helge Deller <deller@gmx.de> |