IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
PLL bypass mode requires mclk to be present. However, mclk pin is not
connected in JSL boards. Here we add the SOF_DA7219_MCLK_EN quirk to
improve driver readability.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add exit function to headphone codec dai link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize common part of
sof_card_private structure. Also unify the macros of board quirks for
the initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the quirk in preparation for future changes: common quriks will
be defined and handled in board helper module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration supports RPL boards which implement DA7219 on SSP0
and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK
locking problem. To use this mode, the MCLK frequency must be 12.288
or 24.576MHz in the topology binary.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is a helper function to generate entire DAI link array, we
switch individual dai link helpers to static function. No functional
change in this commit.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an new field link_id_overwrite to sof_card_private structure to
support machine drivers which DAI link ID is fixed number or
discontinue (i.e. no-codec boards). If this field is zero, DAI array
index will be used as link ID. Otherwise the value extracted from
link_id_overwrite will be used.
The field link_id_overwrite is supposed to be initialized by
SOF_LINK_IDS macro like following example.
ctx->link_id_overwrite = SOF_LINK_IDS(HEADPHONE_BE_ID, \
DMIC01_BE_ID, \
DMIC16K_BE_ID, \
IDISP_HDMI_BE_ID, \
SPK_BE_ID, \
BT_OFFLOAD_BE_ID, \
HDMI_IN_BE_ID)
An exception is that, if you use link_order_overwrite to overwrite
DAI link order, then you need to use the same order to build
link_id_overwrite variable as well.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert WM8974 audio CODEC bindings from text to dtschema.
Signed-off-by: Kartik Agarwala <agarwala.kartik@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240325181943.116733-1-agarwala.kartik@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert fsl,esai.txt to yaml. So DTB_CHECK tools can verify dts file about
esai part.
clock-names 'spba' is optional according to description. So minItems of
clocks and clock-names is 3.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240322145406.2613256-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MediaTek sound card drivers are checking whether a DAI link is present
and used on a board to assign the correct parameters and this is done
by checking the codec DAI names at probe time.
If no real codec is present, assign the dummy codec to the DAI link
to avoid NULL pointer during string comparison.
Fixes: 4302187d955f ("ASoC: mediatek: common: add soundcard driver common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240313110147.1267793-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the enumerations for UL/DL rates, delay data and the functions
adda_{dl,ul}_rate_transform were duplicated for each MediaTek SoC
dai-adda driver: move the common bits to a new mtk-dai-adda-common
file and its header.
While at it, also add the "mtk_" prefix to the exported functions.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240313110147.1267793-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the probe function by switching error prints to return
dev_err_probe(), lowering the lines count; while at it, also
beautify some messages and change some others' level from warn
to error.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://msgid.link/r/20240313110147.1267793-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from pm_runtime_enable() to devm_pm_runtime_enable(), allowing
to remove all gotos from the probe function.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://msgid.link/r/20240313110147.1267793-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert WM8776 audio CODEC bindings from text to dtschema.
Signed-off-by: Kartik Agarwala <agarwala.kartik@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240317200201.119233-1-agarwala.kartik@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CONFIG_SOUNDWIRE_AMD is a user-visible option, it should be never
selected by another driver.
So replace the extra complexity with a normal Kconfig dependency in
SND_SOC_AMD_SOUNDWIRE.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240322112018.3063344-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert fsl,audmix.txt to yaml to let dtb check tools check audmix part.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240321150401.2464783-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment we cannot instantiate two dmaengine_pcms with the same
parent device, as the components will be named the same, leading to
conflicts.
Add 'name' field to the snd_dmaengine_pcm_config, and use that (if
defined) as the component name instead of deriving the component name
from the device.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://msgid.link/r/20240319-xilinx-dp-audio-v2-1-92d6d3a7ca7e@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
REG_SUPPLY mutes the DAC when switching between
HDMI and speaker, so remove it to fix the mute issues
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240320083012.4282-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For lower power consumption during hibernation, the configuration of
es8326_suspend and es8326_remove will be adjusted.
Adding es8326_i2c_shutdown and es8326_i2c_remove to cover different
situations
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240320083012.4282-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to support register and unregister rpmsg sound card through
remoteproc platform device for card to probe is registered in
imx-audio-rpmsg. ASoC machine driver no longer can get DT node of ASoC
CPU DAI device through parent device.
ASoC machine driver can get DT node of ASoC CPU DAI device with rpmsg
channel name acquired from platform specific data.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240311111349.723256-6-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each rpmsg sound card sits on one rpmsg channel. Register CPU DAI with
name of rpmsg channel so that ASoC machine driver can easily link CPU
DAI with rpmsg channel name.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240311111349.723256-5-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Let imx-audio-rpmsg register platform device for card. So that card
register and unregister can be controlled by rpmsg driver's register
and unregister.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240311111349.723256-4-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This rpmsg driver registers device for ASoC platform driver. To align
with platform driver use rpmsg channel name to create device.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240311111349.723256-3-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine driver uses rpmsg channel name to link this platform component.
However if the component is re-registerd card will not find this new
created component in snd_soc_try_rebind_card().
Explicitly register this component with rpmsg channel name so that
card can always find this component.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240311111349.723256-2-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The card-name suffix and the DP-widgets are an unintended copy-paste
from skl_nau88215_ssm4567.c. Both are redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A copy-paste from intel/boards/skl_nau88l25_ssm4567.c made the avs's
equivalent disable route checks as well. Such behavior is not desired.
Fixes: 69ea14efe99b ("ASoC: Intel: avs: Add ssm4567 machine board")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One of the framework responsibilities is to ensure that the enumerated
DPCMs are valid i.e.: a valid BE is connected to a valid FE DAI. While
the are checks in soc-core.c and soc-pcm.c that verify this, a component
driver may attempt to workaround this by loading an invalid graph
through the topology file.
Be strict and fail topology loading when invalid graph is encountered.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-3-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology files that are propagated to the world and utilized by the
skylake-driver carry shortcomings in their SectionGraphs.
Since commit daa480bde6b3 ("ASoC: soc-core: tidyup for
snd_soc_dapm_add_routes()") route checks are no longer permissive. Probe
failures for Intel boards have been partially addressed by commit
a22ae72b86a4 ("ASoC: soc-core: disable route checks for legacy devices")
and its follow up but only skl_nau88l25_ssm4567.c is patched. Fix the
problem for the rest of the boards.
Link: https://lore.kernel.org/all/20200309192744.18380-1-pierre-louis.bossart@linux.intel.com/
Fixes: daa480bde6b3 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-2-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the jack detection functionality in the A64 variant,
which uses a pair of IRQs; and microphone accessory (button) detection,
which uses an ADC with an IRQ trigger.
IRQs will only be triggered if the JACKDETEN, HMICBIASEN, and MICADCEN
bits are set appropriately in the analog codec component
(sun50i-codec-analog), but there is no direct software dependency
between the two components.
Setup ADC so that it samples with period of 16ms, disable smoothing
and enable MDATA threshold (should be below idle voltage/HMIC_DATA
value). Also enable HMIC_N, which makes sure we get HMIC_N samples
after HMIC_DATA crosses the threshold.
This allows us to perform steady state detection of HMIC_DATA, by
comparing current and previous ADC samples, to detect end of the
transient when the user de-presses the button. Otherwise ADC could
sample anywhere within the transient, and the driver may mis-issue
key-press events for other buttons attached to the resistor ladder.
[Ondrej: Almost complete rewrite of the patch, change to use set_jack
API. Better de-bounce, fix mic button handling, better interrupt
processing.]
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Decouple from analog codec, fixes]
Co-developed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-5-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the necessary setup to enable jack detection on startup
as well as the callback function enabling the microphone ADC when
headset bias is enabled. The microphone ADC is also disabled in suspend.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Moved MICADCEN setup to HBIAS event, added bias hooks]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-4-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
For codec variants that have a bus clock, that clock must be running to
receive interrupts. Since jack and mic accessory detection should work
even when no audio is playing, that means the bus clock should be
enabled any time the system is on.
Accomplish that by tying the bus clock to the runtime PM state, which is
then tied to the bias level not being OFF. Since the codec sets
idle_bias_on, bias will generally never be OFF. However, we can set
suspend_bias_off to maintain the power savings of gating the bus clock
during suspend, when we don't expect jack/accessory detection to work.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-3-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
With idle_bias_on and suspend_bias_off, there are bias level transitions
that match the suspend/resume callbacks. However, there are also
transitions during probe (OFF => STANDBY) and removal (STANDBY => OFF).
By using the set_bias_level hook, the driver can have one copy of code
that would otherwise be duplicated between the probe/resume and
suspend/remove hooks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-2-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZgCRgwAKCRAwbglWLn0t
XHozAP9jLdeGs1ReYZAn+W0QtW/SJHJznoPiHcktdNKG4rNX3QD9G3URu0f4jKCG
yvjw8qHM1pC2cihXXjABjf7gL7g6LAE=
=cNP7
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration to
prevent triggering the related WARN_ONs() in the APIC and topology code.
- Handle the case where no APIC is found gracefully by registering a fake
APIC in the topology code. That makes all related topology functions
work correctly and does not affect the actual APIC driver code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs are
not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmYAUH4THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXzREAC/HVB7yzUEbjbh7dyYRBEgFU19bcyC
JKf9HVmEHj03HstUxF1dxguUhwfHVPNTWpjmy/fRwxqgM9JG+QpV6T4DIldWqchv
AUYFrQBMvql8hTKxRa/Ny75d2IqKPgEEGUuyU+ZHAzEEPwhKrbtVRDPuEiMxpd5I
9B1Pya4EzUyOv1UhPIg7PRoya1msimBZ0mCw4In6ri6xVRm1uC3Ln4LZPylxn96l
f77rz5UToUw0gfgDaezF0z4ml1phGEdSX0Z3hhD0PX12wbJGEdvPzL0qTgEq72Ad
AeLmHx4K8z2zoHMHK7iTEwjoplQxGsWLoezh22cVEEJX0dtzHz6R0ftBCa6uzATJ
C8FF1oDDHAhTL94YmVSTZHr6AdJ6LwgYHO3zXZUhxuB7PNXAT4FmT0zgU1fU3sC1
U/1mIFdgOEUOlGll2Ra5uTUKc0K/dc+yC9dcbz37Kwj3KlfqTN+5BWocjySkHomr
gcv37aU1TJGSC/D1lYWTDWGKVbbP5lk+KIGICT5SBKn0METa/wOo8dE6+T1kIwvS
t2QTlJdzilLcWGVQ8GiNjjRxFtRKY5i9Shi4K+wUvCee4/XJzRrpxrCEY8w/qceV
hc3kfUIon3TCv8+rnlSuNRZBvmFhXMYwMt0gQv4YywB+aOITKTzbGUOazLtRNKAH
lFCnBRS55AB8mg==
=WyQ2
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set time
slice.
-----BEGIN PGP SIGNATURE-----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=K76J
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler doc clarification from Thomas Gleixner:
"A single update for the documentation of the base_slice_ns tunable to
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set
time slice"
* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and they
should be solid now.
-----BEGIN PGP SIGNATURE-----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=Xaob
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and
they should be solid now"
* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
swiotlb: Fix alignment checks when both allocation and DMA masks are present
swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
swiotlb: Enforce page alignment in swiotlb_alloc()
swiotlb: Fix double-allocation of slots due to broken alignment handling
Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.
Tested with QEMU and OVMF firmware.
Fixes: bad267f9e18f ("efi: verify that variable services are supported")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.
So make the memset() conditional on whether the EFI stub is running in
native mode.
Fixes: b3810c5a2cc4a666 ("x86/efistub: Clear decompressor BSS in native EFI entrypoint")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
