IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As the code stands today the array access in remap_intr() is OK. To
future proof the code though we should explicitly check to ensure the
index value is not outside of the valid range. This is not a straight
forward calculation so err on the side of caution.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Keep VL15 credits at 0 during LNI, before link-up. Store
VL15 credits value during verify cap interrupt and set
in after link-up. This addresses an issue where VL15 MAD
packets could be sent by one side of the link before
the other side is ready to receive them.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull more rdma updates from Doug Ledford:
"As mentioned in my first pull request, this is the subsequent pull
requests I had. This is all I have, and in fact this cleans out the
RDMA subsystem's entire patchworks queue of kernel changes that are
ready to go (well, it did for the weekend anyway, a few new patches
are in, but they'll be coming during the -rc cycle).
The first tag contains a single patch that would have conflicted if
taken from my tree or DaveM's tree as it needed our trees merged to
come cleanly.
The second tag contains the patch series from Intel plus three other
stragllers that came in late last week. I took them because it allowed
me to legitimately claim that the RDMA patchworks queue was, for a
short time, 100% cleared of all waiting kernel patches, woohoo! :-).
I have it under my for-next tag, so it did get 0day and linux- next
over the end of last week, and linux-next did show one minor conflict.
Summary:
'for-linus' tag:
- mlx5/IPoIB fixup patch
'for-next' tag:
- the hfi1 15 patch set that landed late
- IPoIB get_link_ksettings which landed late because I asked for a
respin
- one late rxe change
- one -rc worthy fix that's in early"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Enable IPoIB acceleration
* tag 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
rxe: expose num_possible_cpus() cnum_comp_vectors
IB/rxe: Update caller's CRC for RXE_MEM_TYPE_DMA memory type
IB/hfi1: Clean up on context initialization failure
IB/hfi1: Fix an assign/ordering issue with shared context IDs
IB/hfi1: Clean up context initialization
IB/hfi1: Correctly clear the pkey
IB/hfi1: Search shared contexts on the opened device, not all devices
IB/hfi1: Remove atomic operations for SDMA_REQ_HAVE_AHG bit
IB/hfi1: Use filedata rather than filepointer
IB/hfi1: Name function prototype parameters
IB/hfi1: Fix a subcontext memory leak
IB/hfi1: Return an error on memory allocation failure
IB/hfi1: Adjust default eager_buffer_size to 8MB
IB/hfi1: Get rid of divide when setting the tx request header
IB/hfi1: Fix yield logic in send engine
IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache line
IB/hfi1: Fix checks for Offline transient state
IB/ipoib: add get_link_ksettings in ethtool
Pull PCI updates from Bjorn Helgaas:
- add framework for supporting PCIe devices in Endpoint mode (Kishon
Vijay Abraham I)
- use non-postable PCI config space mappings when possible (Lorenzo
Pieralisi)
- clean up and unify mmap of PCI BARs (David Woodhouse)
- export and unify Function Level Reset support (Christoph Hellwig)
- avoid FLR for Intel 82579 NICs (Sasha Neftin)
- add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)
- short-circuit config access failures for disconnected devices (Keith
Busch)
- remove D3 sleep delay when possible (Adrian Hunter)
- freeze PME scan before suspending devices (Lukas Wunner)
- stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)
- disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)
- add arch-specific alignment control to improve device passthrough by
avoiding multiple BARs in a page (Yongji Xie)
- add sysfs sriov_drivers_autoprobe to control VF driver binding
(Bodong Wang)
- allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)
- fix crashes when unbinding host controllers that don't support
removal (Brian Norris)
- add driver for MicroSemi Switchtec management interface (Logan
Gunthorpe)
- add driver for Faraday Technology FTPCI100 host bridge (Linus
Walleij)
- add i.MX7D support (Andrey Smirnov)
- use generic MSI support for Aardvark (Thomas Petazzoni)
- make Rockchip driver modular (Brian Norris)
- advertise 128-byte Read Completion Boundary support for Rockchip
(Shawn Lin)
- advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)
- convert atomic_t to refcount_t in HV driver (Elena Reshetova)
- add CPU IRQ affinity in HV driver (K. Y. Srinivasan)
- fix PCI bus removal in HV driver (Long Li)
- add support for ThunderX2 DMA alias topology (Jayachandran C)
- add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)
- add ITE 8893 bridge DMA alias quirk (Jarod Wilson)
- restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(Manish Jaggi)
* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
PCI: Don't allow unbinding host controllers that aren't prepared
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
MAINTAINERS: Add PCI Endpoint maintainer
Documentation: PCI: Add userguide for PCI endpoint test function
tools: PCI: Add sample test script to invoke pcitest
tools: PCI: Add a userspace tool to test PCI endpoint
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
misc: Add host side PCI driver for PCI test function device
PCI: Add device IDs for DRA74x and DRA72x
dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
PCI: dwc: dra7xx: Add EP mode support
PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
dt-bindings: PCI: Add DT bindings for PCI designware EP mode
PCI: dwc: designware: Add EP mode support
Documentation: PCI: Add binding documentation for pci-test endpoint function
ixgbe: Use pcie_flr() instead of duplicating it
IB/hfi1: Use pcie_flr() instead of duplicating it
PCI: imx6: Fix spelling mistake: "contol" -> "control"
...
Context initialization mixes base context init with sub context init.
This is bad because contexts can be reused, and on reuse, reinit things
that should not re-initialized.
Normalize comments and function names to refer to base context and
sub context (not main, shared or slaves).
Separate the base context initialization from sub context initialization.
hfi1_init_ctxt() cannot return an error so changed to a void and remove
error message.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the close path the context is removed from the device array, and then
the clear pkey function is called. The pkey function trys to get the
context from the device array, but because it was removed the clearing
does not occur.
Rework pkey clear function to work as expected. Update the function
variable to reflect the correct size and name of the hw_context.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add missing braces around else blocks in a few places to make checkpatch
happy.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Checkpatch flagged a misspelled word. Fix it.
Fixes: 8764522e52 ("staging/rdma/hfi1: Unexpected link up pkey values are not an error")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Secure data is transferred across the link during verify
cap. This includes Neighbor Guid, Type, and Port Number.
This transfer is not guaranteed to complete until the 8051
firmware has completed processing of the state_complete
frame. Move the consumption of this data from verify cap
handling to link up handling to ensure the data is finalized.
Additionally, do not notify the SM that the link is up until
after this data is actually available.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
HFI1 HW specific support for VNIC functionality.
Dynamically allocate a set of contexts for VNIC when the first vnic
port is instantiated. Allocate VNIC contexts from user contexts pool
and return them back to the same pool while freeing up. Set aside
enough MSI-X interrupts for VNIC contexts and assign them when the
contexts are allocated. On the receive side, use an RSM rule to
spread TCP/UDP streams among VNIC contexts.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add ability to fault packets on transmit by opcode.
Dropping by packet can be achieved by setting the mask to 0.
In order to drop non-verbs traffic we set PbcInsertHrc
to NONE (0x2). The packet will still be delivered to
the receiving node but a KHdrHCRCErr (KDETH packet
with a bad HCRC) will be triggered and the packet will
not be delivered to the correct context.
In order to drop regular verbs traffic we set the
PbcTestEbp flag. The packet will still be delivered
to the receiving node but a 'late ebp error' will
be triggered and will be dropped.
A global toggle (/sys/kernel/debug/hfi1/hfi1_X/fault_suppress_err)
has been added to suppress the error messages on the receive
node when a packet was faulted on the sending node.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Attempting to read the status of a QSFP cable creates noise in the logs
and misses out on setting an appropriate Offline/Disabled Reason if the
cable is not plugged in. Check for this prior to attempting the read and
attendant retries.
Fixes: 673b975f1f ("IB/hfi1: Add QSFP sanity pre-check")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the LCB is going offline, inopportune port queries can cause
benign error messages to be logged. To deal with this, cache the
registers just before setting the LCB to offline, allowing queries to
return without eliciting the error.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the DC is in shutdown state, the set link state function will return
an error. Since this is not a failure in this state, make sure to
only call set link state if the DC is on.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use rate-limit state to limit number of messages logged
to kernel message buffer for DCC errors. Add new macro
dd_dev_info_ratelimited for that propose. Replace all
dd_dev_info calls in handle_dcc_err function with
rate-limited version.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull rdma updates from Doug Ledford:
"This is the complete update for the rdma stack for this release cycle.
Most of it is typical driver and core updates, but there is the
entirely new VMWare pvrdma driver. You may have noticed that there
were changes in DaveM's pull request to the bnxt Ethernet driver to
support a RoCE RDMA driver. The bnxt_re driver was tentatively set to
be pulled in this release cycle, but it simply wasn't ready in time
and was dropped (a few review comments still to address, and some
multi-arch build issues like prefetch() not working across all
arches).
Summary:
- shared mlx5 updates with net stack (will drop out on merge if
Dave's tree has already been merged)
- driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
- debug cleanups
- new connection rejection helpers
- SRP updates
- various misc fixes
- new paravirt driver from vmware"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits)
IB: Add vmw_pvrdma driver
IB/mlx4: fix improper return value
IB/ocrdma: fix bad initialization
infiniband: nes: return value of skb_linearize should be handled
MAINTAINERS: Update Intel RDMA RNIC driver maintainers
MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers
IB/core: fix unmap_sg argument
qede: fix general protection fault may occur on probe
IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc
mlx5, calc_sq_size(): Make a debug message more informative
mlx5: Remove a set-but-not-used variable
mlx5: Use { } instead of { 0 } to init struct
IB/srp: Make writing the add_target sysfs attr interruptible
IB/srp: Make mapping failures easier to debug
IB/srp: Make login failures easier to debug
IB/srp: Introduce a local variable in srp_add_one()
IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
...
A few snoop related variables were missed in the snoop/capture removal
to get out of staging. Go back and clean those up too.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch fixes an Oops on device unbind, when the device is used
by a PSM user process. PSM processes access device resources which
are freed on device removal. Similar protection exists in uverbs
in ib_core for Verbs clients, but PSM doesn't use ib_uverbs hence
a separate protection is required for PSM clients.
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The dma_XXX API functions return bus addresses which are
physical addresses when IOMMU is disabled. Buffer
mapping to user-space is done via remap_pfn_range() with PFN
based on bus address instead of physical. This results in
wrong pages being mapped to user-space when IOMMU is enabled.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use common header file structs, defines, and accessors
in the drivers. The old declarations are removed.
The repositioning of the includes allows for the removal
of hfi1_message_header and replaces its use with ib_header.
Also corrected are two issues with set_armed_to_active():
- The "packet" parameter is now a pointer as it should have been
- The etype is validated to insure that the header is correct
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The global variable n_krcvqs stores the sum of the number of kernel
receive queues of VLs 0-7 which the user can pass to the driver through
the module parameter array krcvqs which is of type unsigned integer. If
the user passes large value(s) into krcvqs parameter array, it can cause
an arithmetic overflow while calculating n_krcvqs which is also of type
unsigned int. The overflow results in an incorrect value of n_krcvqs
which can lead to kernel crash while loading the driver.
Fix by changing the data type of n_krcvqs to unsigned long. This patch
also changes the data type of other variables that get their values from
n_krcvqs.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Save the current capability state at user context creation
time. Report this saved value for all shared contexts.
Also get rid of unnecessary hfi1_get_base_kinfo function.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some QSFP cables assert the interrupt line as a side effect of module
plug-in and power up. This causes the SerDes and QSFP tuning algorithm
to begin cable initialization by reading the QSFP memory map over I2C,
which fails. This patch ignores any interrupt line assertion until
the module has completed power up and voltage rails have stabilized,
which can take a maximum of 500 ms per the SFF-8679 specification.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When link up fails in LNI, the local and peer state complete
frames are reported as numbers. Explain what the values mean
so the operator can better diagnose the problem.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, the default number of kernel receive contexts is set to the
number of NUMA nodes on the system plus one for control context. However,
the systems that have a single socket and/or have NUMA disabled in the BIOS
will have only one receive context by default. This patch would ensure that
by default there will be at least two kernel receive contexts plus one for
control context regardless of the number of NUMA nodes on the system. The
user can override the default number of kernel receive contexts with the
krcvqs module parameter.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When HFI units get initialized, they each use their own mask copy for
affinity assignments. On a multi-HFI system, affinity assignments
overbook CPU cores as each HFI doesn't have knowledge of affinity
assignments for other HFI units. Therefore, some CPU cores are never
used for interrupt handlers in systems with high number of CPU cores
per NUMA node.
For multi-HFI systems, SDMA engine interrupt assignments start all over
from the first CPU in the local NUMA node after the first HFI
initialization. This change allows assignments to continue where the
last HFI unit left off.
Add global structure for affinity assignments for multiple HFIs to share
affinity mask.
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Swapping a cable from a "Mgmt Allowed=No" switch port to a
"Mgmt Allowed=Yes" switch port doesn't send a pkey change
notification. Therefore, the link doesn't become active as
the oib_utils layer uses an old pkey table cache.
Fix by ensuring the pkey change notification is sent when
the table is changed both explicitly by the FM and implicitly
by the driver via a cable swap.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
FULL_MGMT_P_KEY doesn't get cleared from the pkey table at link bounce
because the link down and link bounce code paths are different when
moving a QSFP cable on a switch. This causes an HFI unit connected to a
switch to try to be initialized to an FM node when the QSFP cable is
moved from a MgmtAllowed=NO port to a MgmtAllowed=YES port and back to a
MgmtAllowed=NO port. Remove FULL_MGMT_P_KEY from pkey table at link up.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
