44aeec836d
8388 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mirsad Goran Todorovac
|
4acfe3dfde |
test_firmware: prevent race conditions by a correct implementation of locking
Dan Carpenter spotted a race condition in a couple of situations like
these in the test_firmware driver:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
u8 val;
int ret;
ret = kstrtou8(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&test_fw_mutex);
*(u8 *)cfg = val;
mutex_unlock(&test_fw_mutex);
/* Always return full write size even if we didn't consume all */
return size;
}
static ssize_t config_num_requests_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
mutex_lock(&test_fw_mutex);
if (test_fw_config->reqs) {
pr_err("Must call release_all_firmware prior to changing config\n");
rc = -EINVAL;
mutex_unlock(&test_fw_mutex);
goto out;
}
mutex_unlock(&test_fw_mutex);
rc = test_dev_config_update_u8(buf, count,
&test_fw_config->num_requests);
out:
return rc;
}
static ssize_t config_read_fw_idx_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return test_dev_config_update_u8(buf, count,
&test_fw_config->read_fw_idx);
}
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes:
|
||
Su Hui
|
0d2da4b595 |
bpf/tests: Use struct_size()
Use struct_size() instead of hand writing it. This is less verbose and more informative. Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230531043251.989312-1-suhui@nfschina.com |
||
Arnd Bergmann
|
26f15e5de1 |
ubsan: add prototypes for internal functions
Most of the functions in ubsan that are only called from generated code don't have a prototype, which W=1 builds warn about: lib/ubsan.c:226:6: error: no previous prototype for '__ubsan_handle_divrem_overflow' [-Werror=missing-prototypes] lib/ubsan.c:307:6: error: no previous prototype for '__ubsan_handle_type_mismatch' [-Werror=missing-prototypes] lib/ubsan.c:321:6: error: no previous prototype for '__ubsan_handle_type_mismatch_v1' [-Werror=missing-prototypes] lib/ubsan.c:335:6: error: no previous prototype for '__ubsan_handle_out_of_bounds' [-Werror=missing-prototypes] lib/ubsan.c:352:6: error: no previous prototype for '__ubsan_handle_shift_out_of_bounds' [-Werror=missing-prototypes] lib/ubsan.c:394:6: error: no previous prototype for '__ubsan_handle_builtin_unreachable' [-Werror=missing-prototypes] lib/ubsan.c:404:6: error: no previous prototype for '__ubsan_handle_load_invalid_value' [-Werror=missing-prototypes] Add prototypes for all of these to lib/ubsan.h, and remove the one that was already present in ubsan.c. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230517125102.930491-1-arnd@kernel.org |
||
Linus Torvalds
|
d8f14b84fe |
Two fixes for debugobjects:
- Prevent that the allocation path wakes up kswapd. That's a long
standing issue due to the GFP_ATOMIC allocation flag. As debug objects
can be invoked from pretty much any context waking kswapd can end up
in arbitrary lock chains versus the waitqueue lock.
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool().
-----BEGIN PGP SIGNATURE-----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=7B4m
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fixes from Thomas Gleixner:
"Two fixes for debugobjects:
- Prevent the allocation path from waking up kswapd.
That's a long standing issue due to the GFP_ATOMIC allocation flag.
As debug objects can be invoked from pretty much any context waking
kswapd can end up in arbitrary lock chains versus the waitqueue
lock
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool()"
* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't wake up kswapd from fill_pool()
debugobjects,locking: Annotate debug_object_fill_pool() wait type violation
|
||
Kees Cook
|
d67790ddf0 |
overflow: Add struct_size_t() helper
While struct_size() is normally used in situations where the structure
type already has a pointer instance, there are places where no variable
is available. In the past, this has been worked around by using a typed
NULL first argument, but this is a bit ugly. Add a helper to do this,
and replace the handful of instances of the code pattern with it.
Instances were found with this Coccinelle script:
@struct_size_t@
identifier STRUCT, MEMBER;
expression COUNT;
@@
- struct_size((struct STRUCT *)\(0\|NULL\),
+ struct_size_t(struct STRUCT,
MEMBER, COUNT)
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: HighPoint Linux Team <linux@highpoint-tech.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Don Brace <don.brace@microchip.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-scsi@vger.kernel.org
Cc: megaraidlinux.pdl@broadcom.com
Cc: storagedev@microchip.com
Cc: linux-xfs@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230522211810.never.421-kees@kernel.org
|
||
Michal Wajdeczko
|
b1eaa8b2a5 |
kunit: Update kunit_print_ok_not_ok function
There is no need use opaque test_or_suite pointer and is_test flag as we don't use anything from the suite struct. Always expect test pointer and use NULL as indication that provided results are from the suite so we can treat them differently. Since results could be from nested tests, like parameterized tests, add explicit level parameter to properly indent output messages and thus allow to reuse this function from other places. While around, remove small code duplication near skip directive. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Michal Wajdeczko
|
b08f75b9bb |
kunit: Fix reporting of the skipped parameterized tests
Logs from the parameterized tests that were skipped don't include SKIP directive thus they are displayed as PASSED. Fix that. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Michal Wajdeczko
|
d273b72846 |
kunit/test: Add example test showing parameterized testing
Use of parameterized testing is documented [1] but such use case is not present in demo kunit test. Add small subtest for that. [1] https://kernel.org/doc/html/latest/dev-tools/kunit/usage.html#parameterized-testing Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: David Gow <davidgow@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Noah Goldstein
|
688eb8191b |
x86/csum: Improve performance of csum_partial
1) Add special case for len == 40 as that is the hottest value. The
nets a ~8-9% latency improvement and a ~30% throughput improvement
in the len == 40 case.
2) Use multiple accumulators in the 64-byte loop. This dramatically
improves ILP and results in up to a 40% latency/throughput
improvement (better for more iterations).
Results from benchmarking on Icelake. Times measured with rdtsc()
len lat_new lat_old r tput_new tput_old r
8 3.58 3.47 1.032 3.58 3.51 1.021
16 4.14 4.02 1.028 3.96 3.78 1.046
24 4.99 5.03 0.992 4.23 4.03 1.050
32 5.09 5.08 1.001 4.68 4.47 1.048
40 5.57 6.08 0.916 3.05 4.43 0.690
48 6.65 6.63 1.003 4.97 4.69 1.059
56 7.74 7.72 1.003 5.22 4.95 1.055
64 6.65 7.22 0.921 6.38 6.42 0.994
96 9.43 9.96 0.946 7.46 7.54 0.990
128 9.39 12.15 0.773 8.90 8.79 1.012
200 12.65 18.08 0.699 11.63 11.60 1.002
272 15.82 23.37 0.677 14.43 14.35 1.005
440 24.12 36.43 0.662 21.57 22.69 0.951
952 46.20 74.01 0.624 42.98 53.12 0.809
1024 47.12 78.24 0.602 46.36 58.83 0.788
1552 72.01 117.30 0.614 71.92 96.78 0.743
2048 93.07 153.25 0.607 93.28 137.20 0.680
2600 114.73 194.30 0.590 114.28 179.32 0.637
3608 156.34 268.41 0.582 154.97 254.02 0.610
4096 175.01 304.03 0.576 175.89 292.08 0.602
There is no such thing as a free lunch, however, and the special case
for len == 40 does add overhead to the len != 40 cases. This seems to
amount to be ~5% throughput and slightly less in terms of latency.
Testing:
Part of this change is a new kunit test. The tests check all
alignment X length pairs in [0, 64) X [0, 512).
There are three cases.
1) Precomputed random inputs/seed. The expected results where
generated use the generic implementation (which is assumed to be
non-buggy).
2) An input of all 1s. The goal of this test is to catch any case
a carry is missing.
3) An input that never carries. The goal of this test si to catch
any case of incorrectly carrying.
More exhaustive tests that test all alignment X length pairs in
[0, 8192) X [0, 8192] on random data are also available here:
https://github.com/goldsteinn/csum-reproduction
The reposity also has the code for reproducing the above benchmark
numbers.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20230511011002.935690-1-goldstein.w.n%40gmail.com
|
||
David Gow
|
57e3cded99 |
kunit: kmalloc_array: Use kunit_add_action()
The kunit_add_action() function is much simpler and cleaner to use that the full KUnit resource API for simple things like the kunit_kmalloc_array() functionality. Replacing it allows us to get rid of a number of helper functions, and leaves us with no uses of kunit_alloc_resource(), which has some usability problems and is going to have its behaviour modified in an upcoming patch. Note that we need to use kunit_defer_trigger_all() to implement kunit_kfree(). Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
00e63f8afc |
kunit: executor_test: Use kunit_add_action()
Now we have the kunit_add_action() function, we can use it to implement kfree_at_end() and free_subsuite_at_end() without the need for extra helper functions. Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
b9dce8a1ed |
kunit: Add kunit_add_action() to defer a call until test exit
Many uses of the KUnit resource system are intended to simply defer calling a function until the test exits (be it due to success or failure). The existing kunit_alloc_resource() function is often used for this, but was awkward to use (requiring passing NULL init functions, etc), and returned a resource without incrementing its reference count, which -- while okay for this use-case -- could cause problems in others. Instead, introduce a simple kunit_add_action() API: a simple function (returning nothing, accepting a single void* argument) can be scheduled to be called when the test exits. Deferred actions are called in the opposite order to that which they were registered. This mimics the devres API, devm_add_action(), and also provides kunit_remove_action(), to cancel a deferred action, and kunit_release_action() to trigger one early. This is implemented as a resource under the hood, so the ordering between resource cleanup and deferred functions is maintained. Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
David Howells
|
3fc40265ae |
iov_iter: Kill ITER_PIPE
The ITER_PIPE-type iterator was only used by generic_file_splice_read() and that has been replaced and removed. This leaves ITER_PIPE unused - so remove it too. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-31-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Tetsuo Handa
|
eb799279fb |
debugobjects: Don't wake up kswapd from fill_pool()
syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.
Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.
Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation.
Fixes:
|
||
Herbert Xu
|
6c19f3bfff |
crypto: lib/sha256 - Use generic code from sha256_base
Instead of duplicating the sha256 block processing code, reuse the common code from crypto/sha256_base.h. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
70d391a863 |
crypto: lib/sha256 - Remove redundant and unused sha224_update
The function sha224_update is exactly the same as sha256_update. Moreover it's not even used in the kernel so it can be removed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
f4a8871f9f |
Eight hotfixes. Four are cc:stable, the other four are for post-6.4
issues, or aren't considered suitable for backporting. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZGasdgAKCRDdBJ7gKXxA jpTFAQC2WlV6CbEsy46jJK2XzCypzLLxHiRmVCw5pmAucki4awEAjllEuzK6vw61 ytBZ/O2sMB5AbCf31c6UYxgLS32oyAo= =IDcO -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-05-18-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Eight hotfixes. Four are cc:stable, the other four are for post-6.4 issues, or aren't considered suitable for backporting" * tag 'mm-hotfixes-stable-2023-05-18-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: MAINTAINERS: Cleanup Arm Display IP maintainers MAINTAINERS: repair pattern in DIALOG SEMICONDUCTOR DRIVERS nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode() mm: fix zswap writeback race condition mm: kfence: fix false positives on big endian zsmalloc: move LRU update from zs_map_object() to zs_malloc() mm: shrinkers: fix race condition on debugfs cleanup maple_tree: make maple state reusable after mas_empty_area() |
||
Tejun Heo
|
6363845005 |
workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism
Workqueue now automatically marks per-cpu work items that hog CPU for too
long as CPU_INTENSIVE, which excludes them from concurrency management and
prevents stalling other concurrency-managed work items. If a work function
keeps running over the thershold, it likely needs to be switched to use an
unbound workqueue.
This patch adds a debug mechanism which tracks the work functions which
trigger the automatic CPU_INTENSIVE mechanism and report them using
pr_warn() with exponential backoff.
v3: Documentation update.
v2: Drop bouncing to kthread_worker for printing messages. It was to avoid
introducing circular locking dependency through printk but not effective
as it still had pool lock -> wci_lock -> printk -> pool lock loop. Let's
just print directly using printk_deferred().
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
|
||
Peng Zhang
|
0257d9908d |
maple_tree: make maple state reusable after mas_empty_area()
Make mas->min and mas->max point to a node range instead of a leaf entry
range. This allows mas to still be usable after mas_empty_area() returns.
Users would get unexpected results from other operations on the maple
state after calling the affected function.
For example, x86 MAP_32BIT mmap() acts as if there is no suitable gap when
there should be one.
Link: https://lkml.kernel.org/r/20230505145829.74574-1-zhangpeng.00@bytedance.com
Fixes:
|
||
Nick Desaulniers
|
08e4044243 |
ubsan: remove cc-option test for UBSAN_TRAP
-fsanitize-undefined-trap-on-error has been supported since GCC 5.1 and Clang 3.2. The minimum supported version of these according to Documentation/process/changes.rst is 5.1 and 11.0.0 respectively. Drop this cc-option check. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230407215406.768464-1-ndesaulniers@google.com |
||
|
Kees Cook
|
3bf301e1ab |
string: Add Kunit tests for strcat() family
Add tests to make sure the strcat() family of functions behave correctly. Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Kees Cook
|
a9dc8d0442 |
fortify: Allow KUnit test to build without FORTIFY
In order for CI systems to notice all the skipped tests related to CONFIG_FORTIFY_SOURCE, allow the FORTIFY_SOURCE KUnit tests to build with or without CONFIG_FORTIFY_SOURCE. Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Kees Cook
|
2d47c6956a |
ubsan: Tighten UBSAN_BOUNDS on GCC
The use of -fsanitize=bounds on GCC will ignore some trailing arrays, leaving a gap in coverage. Switch to using -fsanitize=bounds-strict to match Clang's stricter behavior. Cc: Marco Elver <elver@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Tom Rix <trix@redhat.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-kbuild@vger.kernel.org Cc: llvm@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230405022356.gonna.338-kees@kernel.org |
||
|
David Gow
|
a5ce66ad29 |
kunit: example: Provide example exit functions
Add an example .exit and .suite_exit function to the KUnit example suite. Given exit functions are a bit more subtle than init functions (due to running in a different kthread, and running even after tests or test init functions fail), providing an easy place to experiment with them is useful. Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
55e8c1b49a |
kunit: Always run cleanup from a test kthread
KUnit tests run in a kthread, with the current->kunit_test pointer set to the test's context. This allows the kunit_get_current_test() and kunit_fail_current_test() macros to work. Normally, this pointer is still valid during test shutdown (i.e., the suite->exit function, and any resource cleanup). However, if the test has exited early (e.g., due to a failed assertion), the cleanup is done in the parent KUnit thread, which does not have an active context. Instead, in the event test terminates early, run the test exit and cleanup from a new 'cleanup' kthread, which sets current->kunit_test, and better isolates the rest of KUnit from issues which arise in test cleanup. If a test cleanup function itself aborts (e.g., due to an assertion failing), there will be no further attempts to clean up: an error will be logged and the test failed. For example: # example_simple_test: test aborted during cleanup. continuing without cleaning up This should also make it easier to get access to the KUnit context, particularly from within resource cleanup functions, which may, for example, need access to data in test->priv. Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
6e27831b91 |
Networking fixes for 6.4-rc2, including fixes from netfilter
Current release - regressions:
- mtk_eth_soc: fix NULL pointer dereference
Previous releases - regressions:
- core:
- skb_partial_csum_set() fix against transport header magic value
- fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
- annotate sk->sk_err write from do_recvmmsg()
- add vlan_get_protocol_and_depth() helper
- netlink: annotate accesses to nlk->cb_running
- netfilter: always release netdev hooks from notifier
Previous releases - always broken:
- core: deal with most data-races in sk_wait_event()
- netfilter: fix possible bug_on with enable_hooks=1
- eth: bonding: fix send_peer_notif overflow
- eth: xpcs: fix incorrect number of interfaces
- eth: ipvlan: fix out-of-bounds caused by unclear skb->cb
- eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=MoPD
-----END PGP SIGNATURE-----
Merge tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mtk_eth_soc: fix NULL pointer dereference
Previous releases - regressions:
- core:
- skb_partial_csum_set() fix against transport header magic value
- fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
- annotate sk->sk_err write from do_recvmmsg()
- add vlan_get_protocol_and_depth() helper
- netlink: annotate accesses to nlk->cb_running
- netfilter: always release netdev hooks from notifier
Previous releases - always broken:
- core: deal with most data-races in sk_wait_event()
- netfilter: fix possible bug_on with enable_hooks=1
- eth: bonding: fix send_peer_notif overflow
- eth: xpcs: fix incorrect number of interfaces
- eth: ipvlan: fix out-of-bounds caused by unclear skb->cb
- eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register"
* tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
af_unix: Fix data races around sk->sk_shutdown.
af_unix: Fix a data race of sk->sk_receive_queue->qlen.
net: datagram: fix data-races in datagram_poll()
net: mscc: ocelot: fix stat counter register values
ipvlan:Fix out-of-bounds caused by unclear skb->cb
docs: networking: fix x25-iface.rst heading & index order
gve: Remove the code of clearing PBA bit
tcp: add annotations around sk->sk_shutdown accesses
net: add vlan_get_protocol_and_depth() helper
net: pcs: xpcs: fix incorrect number of interfaces
net: deal with most data-races in sk_wait_event()
net: annotate sk->sk_err write from do_recvmmsg()
netlink: annotate accesses to nlk->cb_running
kselftest: bonding: add num_grat_arp test
selftests: forwarding: lib: add netns support for tc rule handle stats get
Documentation: bonding: fix the doc of peer_notif_delay
bonding: fix send_peer_notif overflow
net: ethernet: mtk_eth_soc: fix NULL pointer dereference
selftests: nft_flowtable.sh: check ingress/egress chain too
selftests: nft_flowtable.sh: monitor result file sizes
...
|
||
Roy Novich
|
162bd18eb5 |
linux/dim: Do nothing if no time delta between samples
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes:
|
||
|
Linus Torvalds
|
17784de648 |
A single fix for debugobjects:
The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmRWoFATHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYocNID/9e1fU2Nf32woHokzBGgARKb69Kl/hb 6yVdMpOnZtxmluheJLnqCWI4WbAB6NjulEMFv+KkwRZ+QndBKVEo8NMZ9RjbXDBb HEehI6DvsqRDjaytOLEZj+/8afcZ7bUBKk7JuUK+y5B1gZViazfp1eF3hpiKsIV9 aowpH6c9lL/9sPgFe2qpp21MUmNTUQbHpz0vbYC0QjqSEU2zTlu8p//P6VLA3xpl qoh8Gu5qo/L8lPspN2v8TRVXdiqH67J+KpbGO9IuUQWYPQqFdc6WchhHwomAk8nr Nyn9Q1Lred96pTdW3B0Cumnxuf0VPt4X/uQxPSP0kCo/h0Q0Mh6fq59Z66H/Mhjk TAvM52w3VzfTmQB6WgaCD1HyRRqIK5Nd+XqXnenCkHN4kjmGXNLg9MUGxua5CVgF iQTSRYtN18rF9OevDOFGzsEig2RN1JFi9MnJg9Q/L8SoDUn5ZUfhPaSA/HcOBnSe m+9aeRxlb0hAP7+upFKsJkDYzJTtbP6LSx6qqZMyQWqYdsUVHpdiPtJpXb7mLIqQ wo83i/Ohq8+dF6ykd89ZcKJ8vLBrnE1rPFKKmvS5ov1eRt/hZbtR3tmMviCNna0M 2nrJE2fKClbs8Dmc6NNboJdz51ASgZEi32XmdFkATiuZqiD1id7ne0f85ju7DHD9 sOjfo4ZtIKD/Fw== =/0Kc -----END PGP SIGNATURE----- Merge tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again) |
||
|
Linus Torvalds
|
15fb96a35d |
- Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZFLsxAAKCRDdBJ7gKXxA jl8yAQCqjstPsOULf9QN0z4bGAUhY+Wj4ERz1jbKSIuhFCJWiQEAgQvgRXObKjmi OtUB0Ek4CMDCQzbyIQ1Bhp3kxi6+Jgs= =AbyC -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - Some DAMON cleanups from Kefeng Wang - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. [ Andrew called these "final", but I suspect we'll have a series fixing up the fact that the last commit in the dmapools series in the previous pull seems to have unintentionally just reverted all the other commits in the same series.. - Linus ] * tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hwpoison: coredump: support recovery from dump_user_range() mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page() mm/ksm: move disabling KSM from s390/gmap code to KSM code selftests/ksm: ksm_functional_tests: add prctl unmerge test mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0 mm/damon/paddr: fix missing folio_sz update in damon_pa_young() mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate() mm/damon/paddr: minor refactor of damon_pa_pageout() |
||
Kefeng Wang
|
245f092268 |
mm: hwpoison: coredump: support recovery from dump_user_range()
dump_user_range() is used to copy the user page to a coredump file, but if a hardware memory error occurred during copy, which called from __kernel_write_iter() in dump_user_range(), it crashes, CPU: 112 PID: 7014 Comm: mca-recover Not tainted 6.3.0-rc2 #425 pc : __memcpy+0x110/0x260 lr : _copy_from_iter+0x3bc/0x4c8 ... Call trace: __memcpy+0x110/0x260 copy_page_from_iter+0xcc/0x130 pipe_write+0x164/0x6d8 __kernel_write_iter+0x9c/0x210 dump_user_range+0xc8/0x1d8 elf_core_dump+0x308/0x368 do_coredump+0x2e8/0xa40 get_signal+0x59c/0x788 do_signal+0x118/0x1f8 do_notify_resume+0xf0/0x280 el0_da+0x130/0x138 el0t_64_sync_handler+0x68/0xc0 el0t_64_sync+0x188/0x190 Generally, the '->write_iter' of file ops will use copy_page_from_iter() and copy_page_from_iter_atomic(), change memcpy() to copy_mc_to_kernel() in both of them to handle #MC during source read, which stop coredump processing and kill the task instead of kernel panic, but the source address may not always a user address, so introduce a new copy_mc flag in struct iov_iter{} to indicate that the iter could do a safe memory copy, also introduce the helpers to set/cleck the flag, for now, it's only used in coredump's dump_user_range(), but it could expand to any other scenarios to fix the similar issue. Link: https://lkml.kernel.org/r/20230417045323.11054-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Tong Tiangen <tongtiangen@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Peter Zijlstra
|
0cce06ba85 |
debugobjects,locking: Annotate debug_object_fill_pool() wait type violation
There is an explicit wait-type violation in debug_object_fill_pool() for PREEMPT_RT=n kernels which allows them to more easily fill the object pool and reduce the chance of allocation failures. Lockdep's wait-type checks are designed to check the PREEMPT_RT locking rules even for PREEMPT_RT=n kernels and object to this, so create a lockdep annotation to allow this to stand. Specifically, create a 'lock' type that overrides the inner wait-type while it is held -- allowing one to temporarily raise it, such that the violation is hidden. Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Qi Zheng <zhengqi.arch@bytedance.com> Link: https://lkml.kernel.org/r/20230429100614.GA1489784@hirez.programming.kicks-ass.net |
||
Thomas Gleixner
|
0af462f19e |
debugobject: Ensure pool refill (again)
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes:
|
||
|
Linus Torvalds
|
10de638d8e |
s390 updates for the 6.4 merge window
- Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmRM8pwACgkQjYWKoQLX FBjV1AgAlvAhu1XkwOdwqdT4GqE8pcN4XXzydog1MYihrSO2PdgWAxpEW7o2QURN W+3xa6RIqt7nX2YBiwTanMZ12TYaFY7noGl3eUpD/NhueprweVirVl7VZUEuRoW/ j0mbx77xsVzLfuDFxkpVwE6/j+tTO78kLyjUHwcN9rFVUaL7/orJneDJf+V8fZG0 sHLOv0aljF7Jr2IIkw82lCmW/vdk7k0dACWMXK2kj1H3dIK34B9X4AdKDDf/WKXk /OSElBeZ93tSGEfNDRIda6iR52xocROaRnQAaDtargKFl9VO0/dN9ADxO+SLNHjN pFE/9VD6xT/xo4IuZZh/Z3TcYfiLvA== =Geqx -----END PGP SIGNATURE----- Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code * tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits) s390/stackleak: provide fast __stackleak_poison() implementation stackleak: allow to specify arch specific stackleak poison function s390: select ARCH_USE_SYM_ANNOTATIONS s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc() s390: wire up memfd_secret system call s390/mm: enable ARCH_HAS_SET_DIRECT_MAP s390/mm: use BIT macro to generate SET_MEMORY bit masks s390/relocate_kernel: adjust indentation s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc. s390/entry: use SYM* macros instead of ENTRY(), etc. s390/purgatory: use SYM* macros instead of ENTRY(), etc. s390/kprobes: use SYM* macros instead of ENTRY(), etc. s390/reipl: use SYM* macros instead of ENTRY(), etc. s390/head64: use SYM* macros instead of ENTRY(), etc. s390/earlypgm: use SYM* macros instead of ENTRY(), etc. s390/mcount: use SYM* macros instead of ENTRY(), etc. s390/crc32le: use SYM* macros instead of ENTRY(), etc. s390/crc32be: use SYM* macros instead of ENTRY(), etc. s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc. s390/amode31: use SYM* macros instead of ENTRY(), etc. ... |
||
|
Linus Torvalds
|
d579c468d7 |
tracing updates for 6.4:
- User events are finally ready!
After lots of collaboration between various parties, we finally locked
down on a stable interface for user events that can also work with user
space only tracing. This is implemented by telling the kernel (or user
space library, but that part is user space only and not part of this
patch set), where the variable is that the application uses to know if
something is listening to the trace. There's also an interface to tell
the kernel about these events, which will show up in the
/sys/kernel/tracing/events/user_events/ directory, where it can be
enabled. When it's enabled, the kernel will update the variable, to tell
the application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines. Direct trampolines use the ftrace interface but
instead of jumping to the ftrace trampoline, applications (mostly BPF)
can register their own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient than
kprobes, as it does not need to save all the registers that kprobes on
ftrace do. More work needs to be done before the fprobes will be exposed
as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line
by line instead of all at once. There's users in production kernels that
have a large data dump that originally used printk() directly, but the
data dump was larger than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions that
was every traced by ftrace or a direct trampoline. This is used for
debugging issues where a traced function could have caused a crash by
a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields of
the events. It's easier to read by humans.
- Some minor fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZEr36xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quZHAQCzuqnn2S8DsPd3Sy1vKIYaj0uajW5D
Kz1oUJH4F0H7kgEA8XwXkdtfKpOXWc/ZH4LWfL7Orx2wJZJQMV9dVqEPDAE=
=w0Z1
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- User events are finally ready!
After lots of collaboration between various parties, we finally
locked down on a stable interface for user events that can also work
with user space only tracing.
This is implemented by telling the kernel (or user space library, but
that part is user space only and not part of this patch set), where
the variable is that the application uses to know if something is
listening to the trace.
There's also an interface to tell the kernel about these events,
which will show up in the /sys/kernel/tracing/events/user_events/
directory, where it can be enabled.
When it's enabled, the kernel will update the variable, to tell the
application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines.
Direct trampolines use the ftrace interface but instead of jumping to
the ftrace trampoline, applications (mostly BPF) can register their
own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient
than kprobes, as it does not need to save all the registers that
kprobes on ftrace do. More work needs to be done before the fprobes
will be exposed as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
line by line instead of all at once.
There are users in production kernels that have a large data dump
that originally used printk() directly, but the data dump was larger
than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions
that was every traced by ftrace or a direct trampoline. This is used
for debugging issues where a traced function could have caused a
crash by a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields
of the events. It's easier to read by humans.
- Some minor fixes and clean ups.
* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
ring-buffer: Sync IRQ works before buffer destruction
tracing: Add missing spaces in trace_print_hex_seq()
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
recordmcount: Fix memory leaks in the uwrite function
tracing/user_events: Limit max fault-in attempts
tracing/user_events: Prevent same address and bit per process
tracing/user_events: Ensure bit is cleared on unregister
tracing/user_events: Ensure write index cannot be negative
seq_buf: Add seq_buf_do_printk() helper
tracing: Fix print_fields() for __dyn_loc/__rel_loc
tracing/user_events: Set event filter_type from type
ring-buffer: Clearly check null ptr returned by rb_set_head_page()
tracing: Unbreak user events
tracing/user_events: Use print_format_fields() for trace output
tracing/user_events: Align structs with tabs for readability
tracing/user_events: Limit global user_event count
tracing/user_events: Charge event allocs to cgroups
tracing/user_events: Update documentation for ABI
tracing/user_events: Use write ABI in example
tracing/user_events: Add ABI self-test
...
|
||
|
Linus Torvalds
|
f20730efbd |
SMP cross-CPU function-call updates for v6.4:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
||
|
Linus Torvalds
|
33afd4b763 |
Mainly singleton patches all over the place. Series of note are:
- updates to scripts/gdb from Glenn Washburn - kexec cleanups from Bjorn Helgaas -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM= =2CUV -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Mainly singleton patches all over the place. Series of note are: - updates to scripts/gdb from Glenn Washburn - kexec cleanups from Bjorn Helgaas" * tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits) mailmap: add entries for Paul Mackerras libgcc: add forward declarations for generic library routines mailmap: add entry for Oleksandr ocfs2: reduce ioctl stack usage fs/proc: add Kthread flag to /proc/$pid/status ia64: fix an addr to taddr in huge_pte_offset() checkpatch: introduce proper bindings license check epoll: rename global epmutex scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry() scripts/gdb: create linux/vfs.py for VFS related GDB helpers uapi/linux/const.h: prefer ISO-friendly __typeof__ delayacct: track delays from IRQ/SOFTIRQ scripts/gdb: timerlist: convert int chunks to str scripts/gdb: print interrupts scripts/gdb: raise error with reduced debugging information scripts/gdb: add a Radix Tree Parser lib/rbtree: use '+' instead of '|' for setting color. proc/stat: remove arch_idle_time() checkpatch: check for misuse of the link tags checkpatch: allow Closes tags with links ... |
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
8ccd54fe45 |
virtio,vhost,vdpa: features, fixes, cleanups
reduction in interrupt rate in virtio perf improvement for VDUSE scalability for vhost-scsi non power of 2 ring support for packed rings better management for mlx5 vdpa suspend for snet VIRTIO_F_NOTIFICATION_DATA shared backend with vdpa-sim-blk user VA support in vdpa-sim better struct packing for virtio fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRG+QcPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpMyAIALpq8Z9ljl7ADGLuvt/xeCnIdifo7NXam71s +algalRplF3QplnMxZ0vH19Z8Gvyl18fkk/l0tHoCrZZgyseYR6DbyZXPv8YIfFh NSBokhil+ZURH6eNJc2PLcBUF3QIL3rSv7tBq7/++PN3KIqdHIePbyUFLlwqb272 NLkOkHT30QBtncRWJORj/GqDxi/4H1zHDmfMd6xD/1B6IrC3gin205RnLuCa2H65 bP0IE025VrmrRqNGX7nhi7dIFo6SmMPwG5O0YWeEhFHaSOL9PJM/Z9EN4tLhC1v1 Y34fryH9e+MMSgBnCK2ExxTq/pGWsbhPbvisDfDf3M1m1HHfhYI= =N1SV -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "virtio,vhost,vdpa: features, fixes, and cleanups: - reduction in interrupt rate in virtio - perf improvement for VDUSE - scalability for vhost-scsi - non power of 2 ring support for packed rings - better management for mlx5 vdpa - suspend for snet - VIRTIO_F_NOTIFICATION_DATA - shared backend with vdpa-sim-blk - user VA support in vdpa-sim - better struct packing for virtio and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits) vhost_vdpa: fix unmap process in no-batch mode MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS tools/virtio: fix build caused by virtio_ring changes virtio_ring: add a struct device forward declaration vdpa_sim_blk: support shared backend vdpa_sim: move buffer allocation in the devices vdpa/snet: use likely/unlikely macros in hot functions vdpa/snet: implement kick_vq_with_data callback virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support virtio: add VIRTIO_F_NOTIFICATION_DATA feature support vdpa/snet: support the suspend vDPA callback vdpa/snet: support getting and setting VQ state MAINTAINERS: add vringh.h to Virtio Core and Net Drivers vringh: address kdoc warnings vdpa: address kdoc warnings virtio_ring: don't update event idx on get_buf vdpa_sim: add support for user VA vdpa_sim: replace the spinlock with a mutex to protect the state vdpa_sim: use kthread worker vdpa_sim: make devices agnostic for work management ... |
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Linus Torvalds
|
9dd6956b38 |
for-6.4/block-2023-04-21
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
|
||
|
Linus Torvalds
|
85d7ab2463 |
for-6.4-tag
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
|
||
|
Linus Torvalds
|
733f7e9c18 |
This update includes the following changes:
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
|
||
Sergey Senozhatsky
|
96928d9032 |
seq_buf: Add seq_buf_do_printk() helper
Sometimes we use seq_buf to format a string buffer, which we then pass to printk(). However, in certain situations the seq_buf string buffer can get too big, exceeding the PRINTKRB_RECORD_MAX bytes limit, and causing printk() to truncate the string. Add a new seq_buf helper. This helper prints the seq_buf string buffer line by line, using \n as a delimiter, rather than passing the whole string buffer to printk() at once. Link: https://lkml.kernel.org/r/20230415100110.1419872-1-senozhatsky@chromium.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
7ec85f3e08 |
printk changes for 6.4
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmRGaygACgkQUqAMR0iA lPKlGBAAqn0yS8E2CP16Oo8nCB5AjoPVzohh6pQ6O8G0CFhvu47EKVTHPTa1BEFE YAz94geN5crpAmEcQyBcqkcJuLRXmYBOqE1x9M4PcCUUXTjcyYEzBYsOZO+j5jB7 LUPX6jBbm2PpbT/e1ZSr90R8MhblVfBTD7DJHmXGhibYHj5D4KOwxQnhx8uWz9aT dgTWm1AgwEX85wUpXil5phD+YnvI/TxGlyV4AVOYh3y3K7Kc4CAeHFzCsg3h/Amr c2RR1dzvmMcEvg8lF3U9MsnVNF/2i0Tg9BXLRxSe1c20CKhtzNNPH5krPa3vHGeP P//FWDAd9S2hev54TN7LO92V+IsDh8nlU++HwRua50wflzJU/tkyWDtcmmlkGU6A hqtMUWE4libAaAW7FBJomRFirmEtEA4GwXN5WH3+B6htgVwKKrKhL9U/PtQtZxZ1 GUEvtjmnBIfGndu7fHv70a1sLc9LuebOfmOQs3W6p6KUZkmL1Hqg1WGQoYwmUz4A bZRbCwMYNJCG4iO2jDmPU27D6tWMbQdt1kZ20svP6p3PRGy8EuI1C5tnO5Jhkw3E FCFudMMZEuZmBoztWWqEkZSfbMDlH6kc1+6+HMuCfSrpg6QD87TzO5CONIHCZyk9 f3UD04R//BubTdiKQ4y/g6OwctihX7F8i3O71hTj5etuYqPs0nI= =t0d6 -----END PGP SIGNATURE----- Merge tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Code cleanup and dead code removal * tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove obsoleted check for non-existent "user" object lib/vsprintf: Use isodigit() for the octal number check Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT |
||
|
Linus Torvalds
|
53b5e72b9d |
asm-generic updates for 6.4
These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRG8IkACgkQYKtH/8kJ Uid15Q/9E/neIIEqEk6IvtyhUicrJiIZUM0rGoYtWXiz75ggk6Kx9+3I+j8zIQ/E kf2TzAG7q9Md7nfTDFLr4FSr0IcNDj+VG4nYxUyDHdKGcARO+g9Kpdvscxip3lgU Rw5w74Gyd30u4iUKGS39OYuxcCgl9LaFjMA9Gh402Oiaoh+OYLmgQS9h/goUD5KN Nd+AoFvkdbnHl0/SpxthLRyL5rFEATBmAY7apYViPyMvfjS3gfDJwXJR9jkKgi6X Qs4t8Op8BA3h84dCuo6VcFqgAJs2Wiq3nyTSUnkF8NxJ2RFTpeiVgfsLOzXHeDgz SKDB4Lp14o3mlyZyj00MWq1uMJRRetUgNiVb6iHOoKQ/E4demBdh+mhIFRybjM5B XNTWFcg9PWFCMa4W9jnLfZBc881X4+7T+qUF8I0W/1AbRJUmyGj8HO6jLceC4yGD UYLn5oFPM6OWXHp6DqJrCr9Yw8h6fuviQZFEbl/ARlgVGt+J4KbYweJYk8DzfX6t PZIj8LskOqyIpRuC2oDA1PHxkaJ1/z+N5oRBHq1uicSh4fxY5HW7HnyzgF08+R3k cf+fjAhC3TfGusHkBwQKQJvpxrxZjPuvYXDZ0GxTvNKJRB8eMeiTm1n41E5oTVwQ swSblSCjZj/fMVVPXLcjxEW4SBNWRxa9Lz3tIPXb3RheU10Lfy8= =H3k4 -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release" * tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: Kconfig: introduce HAS_IOPORT option and select it as necessary scripts: Update the CONFIG_* ignore list in headers_install.sh pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header Move bp_type_idx to include/linux/hw_breakpoint.h Move ep_take_care_of_epollwakeup() to fs/eventpoll.c Move COMPAT_ATM_ADDPARTY to net/atm/svc.c |
||
|
Linus Torvalds
|
e7989789c6 |
Timers and timekeeping updates:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relcations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they fail
to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up
in the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context
of different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource is
installed, i.e. timekeeping is still tick based and the tick period
advances from there.
The early enablement of sched_clock() broke this alignement as the time
accumulated by sched_clock() is taken into account when timekeeping is
initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
multiple of tick periods, which breaks applications which relied on
that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements
- Cure the concurrent writer race for idle and IO sleeptime statistics
The statitic values which are exposed via /proc/stat are updated from
the CPU local idle exit and remotely by cpufreq, but that happens
without any form of serialization. As a consequence sleeptimes can be
accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
- Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
idle exit updates. As a consequence the readout may result in random
and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing the
remote runqueues nr_iowait counter. The latter is impossible to fix,
so the only way to deal with that is to document it properly and to
remove the assertion in the selftest which triggers occasionally due
to that.
- Restructure struct tick_sched for better cache layout
- Some small cleanups and a better cache layout for struct tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU timers
For unknown reason the introduction of the timer_wait_running() callback
missed to fixup posix CPU timers, which went unnoticed for almost four
years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
out from hard interrupt context to task work, which is handled before
returning to user space or to a VM. The expiry mechanism moves the
expired timers to a stack local list head with sighand lock held. Once
sighand is dropped the task can be preempted and a task which wants to
delete a timer will spin-wait until the expiry task is scheduled back
in. In the worst case this will end up in a livelock when the preempting
task and the expiry task are pinned on the same CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry task
hold it accross the expiry function and let the deleting task which
waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra mutex_lock()/unlock()
pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents the
livelock and cures the problem for RT and !RT systems.
-----BEGIN PGP SIGNATURE-----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=SVnj
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
|
||
|
Linus Torvalds
|
29e95a4b26 |
A single update to debugobjects:
Prevent a race vs. statically initialized objects. Such objects are usually not initialized via an init() function. They are special cased and detected on first use under the assumption that they are already correctly initialized via the static initializer. This works correctly unless there are two concurrent debug object operations on such an object. The first one detects that the object is not yet tracked and tries to establish a tracking object after dropping the debug objects hash bucket lock. The concurrent operation does the same. The one which wins the race ends up modifying the state of the object which makes the other one fail resulting in a bogus debug objects warning. Prevent this by making the detection of a static object and the allocation of a tracking object atomic under the hash bucket lock. So the first one to acquire the hash bucket lock will succeed and the second one will observe the correct tracking state. This race existed forever but was only exposed when the timer wheel code added a debug_object_assert_init() call outside of the timer base locked region. This replaced the previous warning about timer::function being NULL which had to be removed when the timer_shutdown() mechanics were added. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmRGfx8THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYod4YD/98pgjxl9zht0tJpjOQv1GHQeKWGOnS T2NcK7UBF7IZnGVCaQovs1TLPEiHZMY9TgSmefP9UuYNCUthdzgxUv1hljb915zI xcQmqFopUyFF+F+qE7ti1C4HvXzbdss14XK97EcsoooS1ALq5xTkUJEcmdLFRL85 /ACkHz0/iMEHT9QVX6WoAOptg7HLoscb30CEZGa8skStAIRZfMIFqmN5GXzKUsPH oLUldSjoXyqq2ZBu9jiO9GoPmei3VuaZO3qWtN4KYY0C37BvKavgS2N/NsOh7s+0 I51G5+R8o6kQgr3RSll6frsPcy1EXsgPDZXO5tC1W9bp6+yrQ97ztdG0QS52fcPb fcCQtAX3L+K38vf4GfvboDyf7x21leJSYE3u+HCXUlyC2Es8QZgWw4U7Bi8IwSZg /BKC6QkQD/YyG/aQyZq6ZGiLgbJt8g53WiR8HGx35P3RUEy5Mit3bBSuq1dSuGR0 RozFlWswUif3Teticq33MR6Mv9M3866lX4iTMGT50xjJZirb8ongpKkRxIOHVeXV 4//0V/GOswyTwkY884Q6zJCZZq2FEudn6/Vtjh97zLxvJzLbdIEnEPC5HG75Jed0 a9NISg+NT9VOx4PLwgMWgW6dlT5SNUeWD4ddC879c4ELbyNd1i4AY54pMrcwEVVj fGdL6pFfFzZI5w== =19cg -----END PGP SIGNATURE----- Merge tag 'core-debugobjects-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core debugobjects update from Thomas Gleixner: "A single update to debugobjects: Prevent a race vs statically initialized objects. Such objects are usually not initialized via an init() function. They are special cased and detected on first use under the assumption that they are already correctly initialized via the static initializer. This works correctly unless there are two concurrent debug object operations on such an object. The first one detects that the object is not yet tracked and tries to establish a tracking object after dropping the debug objects hash bucket lock. The concurrent operation does the same. The one which wins the race ends up modifying the state of the object which makes the other one fail resulting in a bogus debug objects warning. Prevent this by making the detection of a static object and the allocation of a tracking object atomic under the hash bucket lock. So the first one to acquire the hash bucket lock will succeed and the second one will observe the correct tracking state. This race existed forever but was only exposed when the timer wheel code added a debug_object_assert_init() call outside of the timer base locked region. This replaced the previous warning about timer::function being NULL which had to be removed when the timer_shutdown() mechanics were added" * tag 'core-debugobjects-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Prevent init race with static objects |
||
|
Linus Torvalds
|
1be89faab3 |
linux-kselftest-kunit-6.4-rc1
This KUnit update Linux 6.4-rc1 consists of: - several fixes to kunit tool - new klist structure test - support for m68k under QEMU - support for overriding the QEMU serial port - support for SH under QEMU -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmRFYFsACgkQCwJExA0N Qxw+PxAA1KHnHool3QbzZouFgLgTS2N/hxsOIoWKeUl6guUPX0XYu67FEIyt7p5k a1eFLjt+q4URW/heHKYdffP+Up6xhN5yVP8xJEcbn6GD13lz1clI9RAjObiPOehc KOV90PeAEfzosEGRIp97g4Gzu8NUMZqN7BsKBdzYJ4rEftlcjaILBVp4OfSuCyAi UbYBdRjK4eIOwGXuHVfhNqzH1HRSbzcoSRTywj5qW0Qhpe6KnZBRuZESXYBsxzGb G0nd4+OttjZyplI/xQYwaU0XGAI6roG5G4nAT5YGHLp5g8rTaHetTi+i3iK4iEru wEL0NgywkA0ujAge97RldOjtU97vvSFk7FwxdS9lxaMW/Ut2sN72I2ThI8dBvVRZ fcw8t8mmT1gUv3SCq+s1X13vz22IedXLOfvOY2o/fLk2zxOw5e8FirAz/aFeOf3K ++hK+IQvDmeMMv08bz0ORzdRQcjdwQNQ3klnfdrUVFN9yK+iAllOJ/nrXHLNIXu4 c3ITlAMldcAf2W+LRWzvqqKyT4H8MCXL3L0bBc1M1reRu9nM89AZedO8MHCB0R9Q 2ic0rOxIwZzPJuk0qPDxEVmN7Rpyx85I96YOwRemJTEfdkB/ZX+BfOU0KzinOVHC 3qrHuIw/SyRTlUEDAr53gJ5WHbdjhKAmrd1/FuplyoOSX0w6VVA= =COQn -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - several fixes to kunit tool - new klist structure test - support for m68k under QEMU - support for overriding the QEMU serial port - support for SH under QEMU * tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: add tests for using current KUnit test field kunit: tool: Add support for SH under QEMU kunit: tool: Add support for overriding the QEMU serial port .gitignore: Unignore .kunitconfig list: test: Test the klist structure kunit: increase KUNIT_LOG_SIZE to 2048 bytes kunit: Use gfp in kunit_alloc_resource() kernel-doc kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py kunit: tool: remove unused imports and variables kunit: tool: add subscripts for type annotations where appropriate kunit: fix bug of extra newline characters in debugfs logs kunit: fix bug in the order of lines in debugfs logs kunit: fix bug in debugfs logs of parameterized tests kunit: tool: Add support for m68k under QEMU |
||
|
Linus Torvalds
|
5dfb75e842 |
RCU Changes for 6.4:
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEcoCIrlGe4gjE06JJqA4nf2o45hAFAmQuBnIACgkQqA4nf2o4
5hACVRAAoXu7/gfh5Pjw9O4E4pCdPJKsZZVYrcrVGrq6NAxRn6M1SgurAdC5grj2
96x0waoGaiO82V0H5iJMcKdAVu67x9R8WaQ1JoxN75Efn8h9W4TguB87TV1gk0xS
eZ18b/CyEaM5mNb80DFFF4FLohy5737p/kNTMqXQdUyR1BsDl16iRMgjiBiFhNUx
yPo8Y2kC2U2OTbldZgaE7s9bQO3xxEcifx93sGWsAex/gx54FYNisiwSlCOSgOE+
XkYo/OKk8Xvr82tLVX8XQVEPCMJ+rxea8T5zSs8/alvsPq7gA8wW3y6fsoa3vUU/
+Gd+W+Q/OsONIDtp8rQAY1qsD0ScDpaR8052RSH0zTa7pj8HsQgE5PjZ+cJW0SEi
cKN+Oe8+ETqKald+xZ6PDf58O212VLrru3RpQWrOQcJ7fmKmfT4REK0RcbLgg4qT
CBgOo6eg+ub4pxq2y11LZJBNTv1/S7xAEzFE0kArew64KB2gyVud0VJRZVAJnEfe
93QQVDFrwK2bhgWQZ6J6IbTvGeQW0L93IibuaU6jhZPR283VtUIIvM7vrOylN7Fq
4jsae0T7YGYfKUhgTpm7rCnm8A/D3Ni8MY0sKYYgDSyKmZUsnpI5wpx1xke4lwwV
ErrY46RCFa+k8wscc6iWfB4cGXyyFHyu+wtyg0KpFn5JAzcfz4A=
=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
|
||
|
Linus Torvalds
|
487c20b016 |
iov: improve copy_iovec_from_user() code generation
Use the same pattern as the compat version of this code does: instead of copying the whole array to a kernel buffer and then having a separate phase of verifying it, just do it one entry at a time, verifying as you go. On Jens' /dev/zero readv() test this improves performance by ~6%. [ This was obviously triggered by Jens' ITER_UBUF updates series ] Reported-and-tested-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/all/de35d11d-bce7-e976-7372-1f2caf417103@kernel.dk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
b9dff2195f |
iter-ubuf.2-2023-04-21
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvdsQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpg4oD/457EJ21Fm36NuyT/S0Cr8ok9Tdk7t9BeBh V/9CYThoXr5aqAox0Vq23FF+Rhzm81GzwYERN4493LBblliNeNOo2IaXF9/7qrUW 11v9Bkug2J3k3hRGtEa6Zl0EpMu+FRLsNpchjFS2KPuOq+iMDxrvwuy50kidWg7n r25e4UwpExVO9fIoUSmzgWVfRHOTuj9yiG/UsaH2+2BRXerIX0Q1tyElwmcGh25M Ad2hN+yDnuIbNA5gNUpnzY32Dp0zjAsquc//QOvq9mltcNTElokB8idGliismvyd 8qF0lkwQwewOBT/sSD5EY3K0Qd8IJu425bvT/yPUDScHz1chxHUoxo5eisIr2M9l 5AL5KHAf7Zzs8ZuV+IYPzZ5qM6a/vF3mHUisKRNKYVhF46Nmd4cBratfXwWb1MxV clQM2qr0TLOYli9mOeTXph3hg/rBVqKqf90boAZoN8b2tWBKlMykpqRadbepjrgx bmBSwwAF99NxIHEjU3U5DMdUloCSiMZIfMfDxQrPNDrfWAW4xJs5Ym0VeOjEotTt oFEs1fr6c3Mn7KEuPPfOtnDxvs51IP/B8+gDgMt/edf+wHiCU1Zm31u2gxt2dsKh g73Y92i5SHjIf36H5szBTeioyMy1E1VA9HF14xWz2eKdQ+wxQ9VNWoctcJ85k3F4 6AZDYRIrWA== =EaE9 -----END PGP SIGNATURE----- Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux Pull ITER_UBUF updates from Jens Axboe: "This turns singe vector imports into ITER_UBUF, rather than ITER_IOVEC. The former is more trivial to iterate and advance, and hence a bit more efficient. From some very unscientific testing, ~60% of all iovec imports are single vector" * tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux: iov_iter: Mark copy_compat_iovec_from_user() noinline iov_iter: import single vector iovecs as ITER_UBUF iov_iter: convert import_single_range() to ITER_UBUF iov_iter: overlay struct iovec and ubuf/len iov_iter: set nr_segs = 1 for ITER_UBUF iov_iter: remove iov_iter_iovec() iov_iter: add iter_iov_addr() and iter_iov_len() helpers ALSA: pcm: check for user backed iterator, not specific iterator type IB/qib: check for user backed iterator, not specific iterator type IB/hfi1: check for user backed iterator, not specific iterator type iov_iter: add iter_iovec() helper block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly |
||
|
Peng Zhang
|
29ad6bb313 |
maple_tree: fix allocation in mas_sparse_area()
In the case of reverse allocation, mas->index and mas->last do not point
to the correct allocation range, which will cause users to get incorrect
allocation results, so fix it. If the user does not use it in a specific
way, this bug will not be triggered.
This is a bug, but only VMA uses it now, the way VMA is used now will
not trigger it. There is a possibility that a user will trigger it in
the future.
Also re-check whether the size is still satisfied after the lower bound
was increased, which is a corner case and is incorrect in previous
versions.
Link: https://lkml.kernel.org/r/20230419093625.99201-1-zhangpeng.00@bytedance.com
Fixes:
|
||
Yajun Deng
|
13215e8a4b |
lib/show_mem.c: use for_each_populated_zone() simplify code
__show_mem() needs to iterate over all zones that have memory, we can simplify the code by using for_each_populated_zone(). Link: https://lkml.kernel.org/r/20230417035226.4013584-1-yajun.deng@linux.dev Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Xie Yongji
|
aaf0594829 |
lib/group_cpus: Export group_cpus_evenly()
Export group_cpus_evenly() so that some modules can make use of it to group CPUs evenly according to NUMA and CPU locality. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230323053043.35-2-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
Jakub Kicinski
|
681c5b51dc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Adjacent changes: net/mptcp/protocol.h |
||
|
Noah Goldstein
|
b0687c1119 |
lib/rbtree: use '+' instead of '|' for setting color.
This has a slight benefit for x86 and has no effect on other targets.
The benefit to x86 is it change the codegen for setting a node to block
from `mov %r0, %r1; or $RB_BLACK, %r1` to `lea RB_BLACK(%r0), %r1` which
saves an instructions.
In all other cases it just replace ALU with ALU (or -> and) which
perform the same on all machines I am aware of.
Total instructions in rbtree.o:
Before - 802
After - 782
so it saves about 20 `mov` instructions.
Link: https://lkml.kernel.org/r/20230404221350.3806566-1-goldstein.w.n@gmail.com
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Peng Zhang
|
fb20e99a74 |
maple_tree: use correct variable type in sizeof
The type of variable pointed to by pivs is unsigned long, but the type
used in sizeof is a pointer type. Change it to unsigned long.
This change has no runtime effect, as sizeof(ul) == sizeof(ul *).
Link: https://lkml.kernel.org/r/20230411023513.15227-1-zhangpeng.00@bytedance.com
Fixes:
|
||
|
Peng Zhang
|
97f7e09481 |
maple_tree: simplify mas_wr_node_walk()
Simplify code of mas_wr_node_walk() without changing functionality, and improve readability. Remove some special judgments. Instead of dynamically recording the min and max in the loop, get the final min and max directly at the end. Link: https://lkml.kernel.org/r/20230314124203.91572-3-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Uladzislau Rezki (Sony)
|
869cb29a61 |
lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test case
Add vm_map_ram()/vm_unmap_ram() test case to our stress test-suite. [akpm@linux-foundation.org: fix whitespace, per Lorenzo] Link: https://lkml.kernel.org/r/20230330190639.431589-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Andrew Morton
|
f8f238ffe5 | sync mm-stable with mm-hotfixes-stable to pick up depended-upon upstream changes | ||
Liam R. Howlett
|
06e8fd9993 |
maple_tree: fix mas_empty_area() search
The internal function of mas_awalk() was incorrectly skipping the last
entry in a node, which could potentially be NULL. This is only a problem
for the left-most node in the tree - otherwise that NULL would not exist.
Fix mas_awalk() by using the metadata to obtain the end of the node for
the loop and the logical pivot as apposed to the raw pivot value.
Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com
Fixes:
|
||
|
Liam R. Howlett
|
fad8e4291d |
maple_tree: make maple state reusable after mas_empty_area_rev()
Stop using maple state min/max for the range by passing through pointers
for those values. This will allow the maple state to be reused without
resetting.
Also add some logic to fail out early on searching with invalid
arguments.
Link: https://lkml.kernel.org/r/20230414145728.4067069-1-Liam.Howlett@oracle.com
Fixes:
|
||
Christoph Hellwig
|
7533583e12 |
libcrc32c: remove crc32c_impl
This was only ever used by btrfs, and the usage just went away.
This effectively reverts
|
||
|
Andrew Morton
|
e492cd61b9 | sync mm-stable with mm-hotfixes-stable to pick up depended-upon upstream changes | ||
Akinobu Mita
|
d325c16263 |
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
This fixes a build error when CONFIG_FAULT_INJECTION_CONFIGFS=y and
CONFIG_CONFIGFS_FS=m.
Since the fault-injection library cannot built as a module, avoid building
configfs as a module.
Fixes:
|
||
|
Peng Zhang
|
1f5f12ece7 |
maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug
In mas_alloc_nodes(), "node->node_count = 0" means to initialize the
node_count field of the new node, but the node may not be a new node. It
may be a node that existed before and node_count has a value, setting it
to 0 will cause a memory leak. At this time, mas->alloc->total will be
greater than the actual number of nodes in the linked list, which may
cause many other errors. For example, out-of-bounds access in
mas_pop_node(), and mas_pop_node() may return addresses that should not be
used. Fix it by initializing node_count only for new nodes.
Also, by the way, an if-else statement was removed to simplify the code.
Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com
Fixes:
|
||
|
Thomas Gleixner
|
63a759694e |
debugobject: Prevent init race with static objects
Statically initialized objects are usually not initialized via the init()
function of the subsystem. They are special cased and the subsystem
provides a function to validate whether an object which is not yet tracked
by debugobjects is statically initialized. This means the object is started
to be tracked on first use, e.g. activation.
This works perfectly fine, unless there are two concurrent operations on
that object. Schspa decoded the problem:
T0 T1
debug_object_assert_init(addr)
lock_hash_bucket()
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
- > preemption
lock_subsytem_object(addr);
activate_object(addr)
lock_hash_bucket();
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
if (is_static_object(addr))
init_and_track(addr);
lock_hash_bucket();
obj = lookup_object(addr);
obj->state = ACTIVATED;
unlock_hash_bucket();
subsys function modifies content of addr,
so static object detection does
not longer work.
unlock_subsytem_object(addr);
if (is_static_object(addr)) <- Fails
debugobject emits a warning and invokes the fixup function which
reinitializes the already active object in the worst case.
This race exists forever, but was never observed until mod_timer() got a
debug_object_assert_init() added which is outside of the timer base lock
held section right at the beginning of the function to cover the lockless
early exit points too.
Rework the code so that the lookup, the static object check and the
tracking object association happens atomically under the hash bucket
lock. This prevents the issue completely as all callers are serialized on
the hash bucket lock and therefore cannot observe inconsistent state.
Fixes:
|
||
|
Jakub Kicinski
|
800e68c44f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: tools/testing/selftests/net/config |
||
Nick Alcock
|
7f82b39dc3 |
treewide: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Nick Alcock
|
0c9bf64c5b |
btree: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Nick Alcock
|
5e0266f0e5 |
lib: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Nick Alcock
|
ef5bbd1172 |
crypto: blake2s: remove module-related code
Now blake2s-generic.c can no longer be a module, drop all remaining module-related code as well. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Requested-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Nick Alcock
|
3714878005 |
crypto: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Akinobu Mita
|
4668c7a294 |
fault-inject: allow configuration via configfs
This provides a helper function to allow configuration of fault-injection for configfs-based drivers. The config items created by this function have the same interface as the one created under debugfs by fault_create_debugfs_attr(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/20230327143733.14599-2-akinobu.mita@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Josh Poimboeuf
|
50f9a76ef1 |
iov_iter: Mark copy_compat_iovec_from_user() noinline
After commit 6376ce56feb6 ("iov_iter: import single vector iovecs as
ITER_UBUF"), GCC does an inter-procedural compiler optimization which
moves the user_access_begin() out of copy_compat_iovec_from_user() and
into its callers:
lib/iov_iter.o: warning: objtool: .altinstr_replacement+0x0: redundant UACCESS disable
lib/iov_iter.o: warning: objtool: iovec_from_user.part.0+0xc7: call to copy_compat_iovec_from_user.part.0() with UACCESS enabled
lib/iov_iter.o: warning: objtool: __import_iovec+0x21d: call to copy_compat_iovec_from_user.part.0() with UACCESS enabled
Enforce the "no UACCESS enable across function boundaries" rule by
disabling cloning for copy_compat_iovec_from_user().
Fixes: 6376ce56feb6 ("iov_iter: import single vector iovecs as ITER_UBUF")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
https://lkml.kernel.org/lkml/20230327120017.6bb826d7@canb.auug.org.au
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
Andy Shevchenko
|
ef55ef3e64 |
lib/test-string_helpers: replace UNESCAPE_ANY by UNESCAPE_ALL_MASK
When we get a random number to generate a flag in the valid range of UNESCAPE flags, use UNESCAPE_ALL_MASK, It's more correct and prevents from missed updates of the test coverage in the future if any. Link: https://lkml.kernel.org/r/20230327142604.48213-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexey Dobriyan
|
70e79866ab |
ELF: fix all "Elf" typos
ELF is acronym and therefore should be spelled in all caps. I left one exception at Documentation/arm/nwfpe/nwfpe.rst which looks like being written in the first person. Link: https://lkml.kernel.org/r/Y/3wGWQviIOkyLJW@p183 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Lorenzo Stoakes
|
4f80818b4a |
iov_iter: add copy_page_to_iter_nofault()
Provide a means to copy a page to user space from an iterator, aborting if a page fault would occur. This supports compound pages, but may be passed a tail page with an offset extending further into the compound page, so we cannot pass a folio. This allows for this function to be called from atomic context and _try_ to user pages if they are faulted in, aborting if not. The function does not use _copy_to_iter() in order to not specify might_fault(), this is similar to copy_page_from_iter_atomic(). This is being added in order that an iteratable form of vread() can be implemented while holding spinlocks. Link: https://lkml.kernel.org/r/19734729defb0f498a76bdec1bef3ac48a3af3e8.1679511146.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peng Zhang
|
c45ea315a6 |
maple_tree: fix a potential concurrency bug in RCU mode
There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.
CPU1:
mtree_insert_range()
mas_insert()
mas_store_root()
...
mas_root_expand()
...
rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
ma_set_meta(node, maple_leaf_64, 0, slot); <---IP
CPU2:
mtree_load()
mtree_lookup_walk()
ma_data_end();
When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.
An example of triggering the bug:
Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().
static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}
mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);
In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL. Fix
it by put ma_set_meta() before rcu_assign_pointer().
Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes:
|
||
|
Peng Zhang
|
ec07967d75 |
maple_tree: fix get wrong data_end in mtree_lookup_walk()
if (likely(offset > end))
max = pivots[offset];
The above code should be changed to if (likely(offset < end)), which is
correct. This affects the correctness of ma_data_end(). Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.
Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com
Fixes:
|
||
|
Liam R. Howlett
|
790e1fa86b |
maple_tree: add RCU lock checking to rcu callback functions
Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain. Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.
Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree. Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking. It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes:
|
||
|
Liam R. Howlett
|
0a2b18d948 |
maple_tree: add smp_rmb() to dead node detection
Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.
The is necessary for RCU mode.
Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes:
|
||
|
Liam R. Howlett
|
c13af03de4 |
maple_tree: fix write memory barrier of nodes once dead for RCU mode
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes:
|
||
|
Liam Howlett
|
8372f4d83f |
maple_tree: remove extra smp_wmb() from mas_dead_leaves()
The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed. This is an optimization for the RCU mode
of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes:
|
||
|
Liam Howlett
|
2e5b4921f8 |
maple_tree: fix freeing of nodes in rcu mode
The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types. This is necessary for the
RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Fixes:
|
||
|
Liam Howlett
|
a7b92d59c8 |
maple_tree: detect dead nodes in mas_start()
When initially starting a search, the root node may already be in the
process of being replaced in RCU mode. Detect and restart the walk if
this is the case. This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Fixes:
|
||
|
Liam Howlett
|
39d0bd86c4 |
maple_tree: be more cautious about dead nodes
Patch series "Fix VMA tree modification under mmap read lock".
Syzbot reported a BUG_ON in mm/mmap.c which was found to be caused by an
inconsistency between threads walking the VMA maple tree. The
inconsistency is caused by the page fault handler modifying the maple tree
while holding the mmap_lock for read.
This only happens for stack VMAs. We had thought this was safe as it only
modifies a single pivot in the tree. Unfortunately, syzbot constructed a
test case where the stack had no guard page and grew the stack to abut the
next VMA. This causes us to delete the NULL entry between the two VMAs
and rewrite the node.
We considered several options for fixing this, including dropping the
mmap_lock, then reacquiring it for write; and relaxing the definition of
the tree to permit a zero-length NULL entry in the node. We decided the
best option was to backport some of the RCU patches from -next, which
solve the problem by allocating a new node and RCU-freeing the old node.
Since the problem exists in 6.1, we preferred a solution which is similar
to the one we intended to merge next merge window.
These patches have been in -next since next-20230301, and have received
intensive testing in Android as part of the RCU page fault patchset. They
were also sent as part of the "Per-VMA locks" v4 patch series. Patches 1
to 7 are bug fixes for RCU mode of the tree and patch 8 enables RCU mode
for the tree.
Performance v6.3-rc3 vs patched v6.3-rc3: Running these changes through
mmtests showed there was a 15-20% performance decrease in
will-it-scale/brk1-processes. This tests creating and inserting a single
VMA repeatedly through the brk interface and isn't representative of any
real world applications.
This patch (of 8):
ma_pivots() and ma_data_end() may be called with a dead node. Ensure to
that the node isn't dead before using the returned values.
This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230327185532.2354250-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes:
|
||
Niklas Schnelle
|
fcbfe8121a
|
Kconfig: introduce HAS_IOPORT option and select it as necessary
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. The following architectures do not select HAS_IOPORT: * ARC * C-SKY * Hexagon * Nios II * OpenRISC * s390 * User-Mode Linux * Xtensa All other architectures select HAS_IOPORT at least conditionally. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Rae Moar
|
a42077b787 |
kunit: add tests for using current KUnit test field
Create test suite called "kunit_current" to add test coverage for the use of current->kunit_test, which returns the current KUnit test. Add two test cases: - kunit_current_test to test current->kunit_test and the method kunit_get_current_test(), which utilizes current->kunit_test. - kunit_current_fail_test to test the method kunit_fail_current_test(), which utilizes current->kunit_test. Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Uladzislau Rezki (Sony)
|
c779b97281 |
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
The kvfree_rcu() macro's single-argument form is deprecated. Therefore switch to the new kvfree_rcu_mightsleep() variant. The goal is to avoid accidental use of the single-argument forms, which can introduce functionality bugs in atomic contexts and latency bugs in non-atomic contexts. Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> |
||
|
Andy Shevchenko
|
48e1a66fec |
lib/vsprintf: Use isodigit() for the octal number check
Use isodigit() to test the octal number instead of homegrown approach. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230327142721.48378-1-andriy.shevchenko@linux.intel.com |
||
Greg Kroah-Hartman
|
cd8fe5b6db |
Merge 6.3-rc5 into driver-core-next
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Sadiya Kazi
|
57b4f760f9 |
list: test: Test the klist structure
Add KUnit tests to the klist linked-list structure. These perform testing for different variations of node add and node delete in the klist data structure (<linux/klist.h>). Limitation: Since we use a static global variable, and if multiple instances of this test are run concurrently, the test may fail. Signed-off-by: Sadiya Kazi <sadiyakazi@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Herbert Xu
|
c616fb0cba |
crypto: lib/utils - Move utilities into new header
The utilities have historically resided in algapi.h as they were first used internally before being exported. Move them into a new header file so external users don't see internal API details. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Jakub Kicinski
|
79548b7984 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c |
||
Jens Axboe
|
3b2deb0e46 |
iov_iter: import single vector iovecs as ITER_UBUF
Add a special case to __import_iovec(), which imports a single segment iovec as an ITER_UBUF rather than an ITER_IOVEC. ITER_UBUF is cheaper to iterate than ITER_IOVEC, and for a single segment iovec, there's no point in using a segmented iterator. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
e03ad4ee27 |
iov_iter: convert import_single_range() to ITER_UBUF
Since we're just importing a single vector, we don't have to turn it into an ITER_IOVEC. Instead turn it into an ITER_UBUF, which is cheaper to iterate. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
de4f5fed3f |
iov_iter: add iter_iovec() helper
This returns a pointer to the current iovec entry in the iterator. Only useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF and ITER_IOVEC identically for the first segment. Rename struct iov_iter->iov to iov_iter->__iov to find any potentially troublesome spots, and also to prevent anyone from adding new code that accesses iter->iov directly. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
de7494524d |
mlx5-updates-2023-03-20
mlx5 dynamic msix This patch series adds support for dynamic msix vectors allocation in mlx5. Eli Cohen Says: ================ The following series of patches modifies mlx5_core to work with the dynamic MSIX API. Currently, mlx5_core allocates all the interrupt vectors it needs and distributes them amongst the consumers. With the introduction of dynamic MSIX support, which allows for allocation of interrupts more than once, we now allocate vectors as we need them. This allows other drivers running on top of mlx5_core to allocate interrupt vectors for their own use. An example for this is mlx5_vdpa, which uses these vectors to propagate interrupts directly from the hardware to the vCPU [1]. As a preparation for using this series, a use after free issue is fixed in lib/cpu_rmap.c and the allocator for rmap entries has been modified. A complementary API for irq_cpu_rmap_add() has also been introduced. [1] https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/patch/?id=0f2bf1fcae96a83b8c5581854713c9fc3407556e ================ -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmQeTIUACgkQSD+KveBX +j7oCQgAx9yNHM4BZD2UfIx/P+W13v1B+xOds04Vezl9JlakoqvviPxm3vvuKkl+ j/8DdyoqMUbWV0j5XxgZ+GG91bc14jN1GQ+4fUf63SzA99vAGb9GJPV2aQt5roGh JmMqI2utDfoz+29qtQ+kVchY5AN5AoPXSQH2zkEZmJaPUjYb9Dr/4IayL0JaViAw S31QLHKkSJ8bL8Wc6Op1emNVV7eXs18f7IIjVs3sYOb3WJRPVpmdKneRqLgVYplf Td40Gwobl1elpjEqSSRTJI5YUSR8gcAJlBqIwHeJzFFpO3Pnciopl761osNKKs/a 5ctES5DS6JHqqFGbWV1gKYcRMil3LA== =9i8l -----END PGP SIGNATURE----- Merge tag 'mlx5-updates-2023-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-03-20 mlx5 dynamic msix This patch series adds support for dynamic msix vectors allocation in mlx5. Eli Cohen Says: ================ The following series of patches modifies mlx5_core to work with the dynamic MSIX API. Currently, mlx5_core allocates all the interrupt vectors it needs and distributes them amongst the consumers. With the introduction of dynamic MSIX support, which allows for allocation of interrupts more than once, we now allocate vectors as we need them. This allows other drivers running on top of mlx5_core to allocate interrupt vectors for their own use. An example for this is mlx5_vdpa, which uses these vectors to propagate interrupts directly from the hardware to the vCPU [1]. As a preparation for using this series, a use after free issue is fixed in lib/cpu_rmap.c and the allocator for rmap entries has been modified. A complementary API for irq_cpu_rmap_add() has also been introduced. [1] https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/patch/?id=0f2bf1fcae96a83b8c5581854713c9fc3407556e ================ * tag 'mlx5-updates-2023-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Provide external API for allocating vectors net/mlx5: Use one completion vector if eth is disabled net/mlx5: Refactor calculation of required completion vectors net/mlx5: Move devlink registration before mlx5_load net/mlx5: Use dynamic msix vectors allocation net/mlx5: Refactor completion irq request/release code net/mlx5: Improve naming of pci function vectors net/mlx5: Use newer affinity descriptor net/mlx5: Modify struct mlx5_irq to use struct msi_map net/mlx5: Fix wrong comment net/mlx5e: Coding style fix, add empty line lib: cpu_rmap: Add irq_cpu_rmap_remove to complement irq_cpu_rmap_add lib: cpu_rmap: Use allocator for rmap entries lib: cpu_rmap: Avoid use after free on rmap->obj array entries ==================== Link: https://lore.kernel.org/r/20230324231341.29808-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
b133fffe57 |
Merge branch 'locking/rcuref' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pulling rcurefs from Peter for tglx's work. Link: https://lore.kernel.org/all/20230328084534.GE4253@hirez.programming.kicks-ass.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Danilo Krummrich
|
5c63a7c32a |
maple_tree: export symbol mas_preallocate()
Fix missing EXPORT_SYMBOL_GPL() statement for mas_preallocate(). It isn't actually used by anything yet, but mas_preallocate() is part of the maple tree's 'Advanced API'. All other functions of this API are exported already. Link: https://lkml.kernel.org/r/20230302011035.4928-1-dakr@redhat.com Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
8e00b2dffd |
lib/stackdepot: kmsan: mark API outputs as initialized
KMSAN does not instrument stackdepot and may treat memory allocated by it as uninitialized. This is not a problem for KMSAN itself, because its functions calling stackdepot API are also not instrumented. But other kernel features (e.g. netdev tracker) may access stack depot from instrumented code, which will lead to false positives, unless we explicitly mark stackdepot outputs as initialized. Link: https://lkml.kernel.org/r/20230306111322.205724-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Hyeonggon Yoo
|
4c85c0be3d |
mm, printk: introduce new format %pGt for page_type
%pGp format is used to display 'flags' field of a struct page. However, some page flags (i.e. PG_buddy, see page-flags.h for more details) are stored in page_type field. To display human-readable output of page_type, introduce %pGt format. It is important to note the meaning of bits are different in page_type. if page_type is 0xffffffff, no flags are set. Setting PG_buddy (0x00000080) flag results in a page_type of 0xffffff7f. Clearing a bit actually means setting a flag. Bits in page_type are inverted when displaying type names. Only values for which page_type_has_type() returns true are considered as page_type, to avoid confusion with mapcount values. if it returns false, only raw values are displayed and not page type names. Link: https://lkml.kernel.org/r/20230130042514.2418-3-42.hyeyoo@gmail.com Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> [vsprintf part] Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Nicholas Piggin
|
2655421ae6 |
lazy tlb: shoot lazies, non-refcounting lazy tlb mm reference handling scheme
On big systems, the mm refcount can become highly contented when doing a lot of context switching with threaded applications. user<->idle switch is one of the important cases. Abandoning lazy tlb entirely slows this switching down quite a bit in the common uncontended case, so that is not viable. Implement a scheme where lazy tlb mm references do not contribute to the refcount, instead they get explicitly removed when the refcount reaches zero. The final mmdrop() sends IPIs to all CPUs in the mm_cpumask and they switch away from this mm to init_mm if it was being used as the lazy tlb mm. Enabling the shoot lazies option therefore requires that the arch ensures that mm_cpumask contains all CPUs that could possibly be using mm. A DEBUG_VM option IPIs every CPU in the system after this to ensure there are no references remaining before the mm is freed. Shootdown IPIs cost could be an issue, but they have not been observed to be a serious problem with this scheme, because short-lived processes tend not to migrate CPUs much, therefore they don't get much chance to leave lazy tlb mm references on remote CPUs. There are a lot of options to reduce them if necessary, described in comments. The near-worst-case can be benchmarked with will-it-scale: context_switch1_threads -t $(($(nproc) / 2)) This will create nproc threads (nproc / 2 switching pairs) all sharing the same mm that spread over all CPUs so each CPU does thread->idle->thread switching. [ Rik came up with basically the same idea a few years ago, so credit to him for that. ] Link: https://lore.kernel.org/linux-mm/20230118080011.2258375-1-npiggin@gmail.com/ Link: https://lore.kernel.org/all/20180728215357.3249-11-riel@surriel.com/ Link: https://lkml.kernel.org/r/20230203071837.1136453-5-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Masami Hiramatsu (Google)
|
87de2163a3 |
lib/test_fprobe: Add a testcase for skipping exit_handler
Add a testcase for skipping exit_handler if entry_handler returns !0. Link: https://lkml.kernel.org/r/167526700658.433354.12922388040490848613.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
39d954200b |
fprobe: Skip exit_handler if entry_handler returns !0
Skip hooking function return and calling exit_handler if the entry_handler() returns !0. Link: https://lkml.kernel.org/r/167526699798.433354.10998365726830117303.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
7e7ef1bfe5 |
lib/test_fprobe: Add a test case for nr_maxactive
Add a test case for nr_maxactive. If the number of active functions is more than nr_maxactive, it must be skipped. Link: https://lkml.kernel.org/r/167526698856.433354.4430007340787176666.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
34cabf8fd1 |
lib/test_fprobe: Add private entry_data testcases
Add test cases for checking whether private entry_data is correctly passed or not. Link: https://lkml.kernel.org/r/167526697074.433354.17790288501657876219.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
76d0de5729 |
fprobe: Pass entry_data to handlers
Pass the private entry_data to the entry and exit handlers so that they can share the context data, something like saved function arguments etc. User must specify the private entry_data size by @entry_data_size field before registering the fprobe. Link: https://lkml.kernel.org/r/167526696173.433354.17408372048319432574.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Tiezhu Yang
|
f478b9987c |
lib/Kconfig.debug: correct help info of LOCKDEP_STACK_TRACE_HASH_BITS
We can see the following definition in kernel/locking/lockdep_internals.h:
#define STACK_TRACE_HASH_SIZE (1 << CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS)
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS is related with STACK_TRACE_HASH_SIZE
instead of MAX_STACK_TRACE_ENTRIES, fix it.
Link: https://lkml.kernel.org/r/1679380508-20830-1-git-send-email-yangtiezhu@loongson.cn
Fixes:
|
||
ye xingchen
|
35260cf545 |
Kconfig.debug: fix SCHED_DEBUG dependency
The path for SCHED_DEBUG is /sys/kernel/debug/sched. So, SCHED_DEBUG should depend on DEBUG_FS, not PROC_FS. Link: https://lkml.kernel.org/r/202301291110098787982@zte.com.cn Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Thomas Gleixner
|
ee1ee6db07 |
atomics: Provide rcuref - scalable reference counting
atomic_t based reference counting, including refcount_t, uses
atomic_inc_not_zero() for acquiring a reference. atomic_inc_not_zero() is
implemented with a atomic_try_cmpxchg() loop. High contention of the
reference count leads to retry loops and scales badly. There is nothing to
improve on this implementation as the semantics have to be preserved.
Provide rcuref as a scalable alternative solution which is suitable for RCU
managed objects. Similar to refcount_t it comes with overflow and underflow
detection and mitigation.
rcuref treats the underlying atomic_t as an unsigned integer and partitions
this space into zones:
0x00000000 - 0x7FFFFFFF valid zone (1 .. (INT_MAX + 1) references)
0x80000000 - 0xBFFFFFFF saturation zone
0xC0000000 - 0xFFFFFFFE dead zone
0xFFFFFFFF no reference
rcuref_get() unconditionally increments the reference count with
atomic_add_negative_relaxed(). rcuref_put() unconditionally decrements the
reference count with atomic_add_negative_release().
This unconditional increment avoids the inc_not_zero() problem, but
requires a more complex implementation on the put() side when the count
drops from 0 to -1.
When this transition is detected then it is attempted to mark the reference
count dead, by setting it to the midpoint of the dead zone with a single
atomic_cmpxchg_release() operation. This operation can fail due to a
concurrent rcuref_get() elevating the reference count from -1 to 0 again.
If the unconditional increment in rcuref_get() hits a reference count which
is marked dead (or saturated) it will detect it after the fact and bring
back the reference count to the midpoint of the respective zone. The zones
provide enough tolerance which makes it practically impossible to escape
from a zone.
The racy implementation of rcuref_put() requires to protect rcuref_put()
against a grace period ending in order to prevent a subtle use after
free. As RCU is the only mechanism which allows to protect against that, it
is not possible to fully replace the atomic_inc_not_zero() based
implementation of refcount_t with this scheme.
The final drop is slightly more expensive than the atomic_dec_return()
counterpart, but that's not the case which this is optimized for. The
optimization is on the high frequeunt get()/put() pairs and their
scalability.
The performance of an uncontended rcuref_get()/put() pair where the put()
is not dropping the last reference is still on par with the plain atomic
operations, while at the same time providing overflow and underflow
detection and mitigation.
The performance of rcuref compared to plain atomic_inc_not_zero() and
atomic_dec_return() based reference counting under contention:
- Micro benchmark: All CPUs running a increment/decrement loop on an
elevated reference count, which means the 0 to -1 transition never
happens.
The performance gain depends on microarchitecture and the number of
CPUs and has been observed in the range of 1.3X to 4.7X
- Conversion of dst_entry::__refcnt to rcuref and testing with the
localhost memtier/memcached benchmark. That benchmark shows the
reference count contention prominently.
The performance gain depends on microarchitecture and the number of
CPUs and has been observed in the range of 1.1X to 2.6X over the
previous fix for the false sharing issue vs. struct
dst_entry::__refcnt.
When memtier is run over a real 1Gb network connection, there is a
small gain on top of the false sharing fix. The two changes combined
result in a 2%-5% total gain for that networked test.
Reported-by: Wangyang Guo <wangyang.guo@intel.com>
Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230323102800.158429195@linutronix.de
|
||
|
Linus Torvalds
|
f768b35a23 |
Fixes for 6.3-rc3:
* Fix a race in the percpu counters summation code where the summation
failed to add in the values for any CPUs that were dying but not yet
dead. This fixes some minor discrepancies and incorrect assertions
when running generic/650.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZBdAbgAKCRBKO3ySh0YR
pkltAQCs4QO5LjYReqjUxd4cSsLtNnNon09qswRsl2GuRyI36AEAxI9QMq4Q6D9V
ZasNbiTCkV3KPKfmp6gf1mQNLk1lGQ0=
=Bz3q
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
|
||
Eli Cohen
|
71f0a24786 |
lib: cpu_rmap: Add irq_cpu_rmap_remove to complement irq_cpu_rmap_add
Add a function to complement irq_cpu_rmap_add(). It removes the irq from the reverse mapping by setting the notifier to NULL. The function calls irq_set_affinity_notifier() with NULL at the notify argument which then cancel any pending notifier work and decrement reference on the notifier. When ref count reaches zero, the glue pointer is kfree and the rmap entry is set to NULL serving both to avoid second attempt to release it and also making the rmap entry available for subsequent mapping. It should be noted the drivers usually creates the reverse mapping at initialization time and remove it at unload time so we do not expect failures in allocating rmap due to kref holding the glue entry. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> |
||
|
Eli Cohen
|
9821d8d462 |
lib: cpu_rmap: Use allocator for rmap entries
Use a proper allocator for rmap entries using a naive for loop. The allocator relies on whether an entry is NULL to be considered free. Remove the used field of rmap which is not needed. Also, avoid crashing the kernel if an entry is not available. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> |
||
|
Eli Cohen
|
4e0473f106 |
lib: cpu_rmap: Avoid use after free on rmap->obj array entries
When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no cases where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the notify arg) is called, followed by a call to free_irq_cpu_rmap() so we don't hit and issue. Subsequent patches in this series excersize this flow, hence the required fix. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> |
||
Paul E. McKenney
|
c521986016 |
locking/csd_lock: Add Kconfig option for csd_debug default
The csd_debug kernel parameter works well, but is inconvenient in cases where it is more closely associated with boot loaders or automation than with a particular kernel version or release. Thererfore, provide a new CSD_LOCK_WAIT_DEBUG_DEFAULT Kconfig option that defaults csd_debug to 1 when selected and 0 otherwise, with this latter being the default. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230321005516.50558-1-paulmck@kernel.org |
||
Geert Uytterhoeven
|
13684e966d |
lib: dhry: fix unstable smp_processor_id(_) usage
When running the in-kernel Dhrystone benchmark with
CONFIG_DEBUG_PREEMPT=y:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/938
Fix this by not using smp_processor_id() directly, but instead wrapping
the whole benchmark inside a get_cpu()/put_cpu() pair. This makes sure
the whole benchmark is run on the same CPU core, and the reported values
are consistent.
Link: https://lkml.kernel.org/r/b0d29932bb24ad82cea7f821e295c898e9657be0.1678890070.git.geert+renesas@glider.be
Fixes:
|
||
|
Liam R. Howlett
|
4bd6dded63 |
test_maple_tree: add more testing for mas_empty_area()
Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition. Test inspired by the reproducer code provided by Snild Dolkow.
The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node(). There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap. This would avoid correcting
the maple state to the correct max limit and return an error.
Link: https://lkml.kernel.org/r/20230307180247.2220303-3-Liam.Howlett@oracle.com
Cc: Snild Dolkow <snild@sony.com>
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Fixes:
|
||
|
Liam R. Howlett
|
0fa99fdfe1 |
maple_tree: fix mas_skip_node() end slot detection
Patch series "Fix mas_skip_node() for mas_empty_area()", v2.
mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count. Instead of using the nodes hard limit, the limit of
data should be used.
mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary. Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot. The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.
This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.
This patch (of 2):
mas_skip_node() is used to move the maple state to the node with a higher
limit. It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node. The
limit of slots that was being used was the node limit and not the last
location of data in the node. This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.
The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.
The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.
The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node(). Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.
mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available. Return on such an
error state immediately.
Link: https://lkml.kernel.org/r/20230307180247.2220303-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230307180247.2220303-2-Liam.Howlett@oracle.com
Fixes:
|
||
Fangrui Song
|
aff69273af |
vdso: Improve cmd_vdso_check to check all dynamic relocations
The actual intention is that no dynamic relocation exists in the VDSO. For this the VDSO build validates that the resulting .so file does not have any relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture, which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative relocations too. However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If a port fails to determine the exact .rel[a].dyn size, the trailing zeros become R_*_NONE relocations. E.g. ld's powerpc port recently fixed https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are generally a no-op in the dynamic loaders. So just ignore them. Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting .so file does not contain any R_* relocation entries except R_*_NONE. Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64 Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64 Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com |
||
Heiko Carstens
|
322a7ce7a6 |
s390: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
Allow to enforce 64 byte function alignment like it is possible for a couple of other architectures. This may or may not be helpful for debugging performance problems, as described with the Kconfig option. Since the kernel works also with 64 byte function alignment there is no reason for not allowing to enforce this function alignment. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
Jason Baron
|
7ce9372909 |
dyndbg: cleanup dynamic usage in ib_srp.c
Currently, in dynamic_debug.h we only provide DEFINE_DYNAMIC_DEBUG_METADATA() and DYNAMIC_DEBUG_BRANCH() definitions if CONFIG_DYNAMIC_CORE is enabled. Thus, drivers such as infiniband srp (see: drivers/infiniband/ulp/srp/ib_srp.c) must provide their own definitions for !CONFIG_DYNAMIC_CORE. Thus, let's move this !CONFIG_DYNAMIC_CORE case into dynamic_debug.h. However, the dynamic debug interfaces should really only be defined if CONFIG_DYNAMIC_DEBUG is set or CONFIG_DYNAMIC_CORE is set along with DYNAMIC_DEBUG_MODULE, (see: Documentation/admin-guide/dynamic-debug-howto.rst). Thus, the undefined case becomes: !((CONFIG_DYNAMIC_DEBUG || (CONFIG_DYNAMIC_CORE && DYNAMIC_DEBUG_MODULE)). With those changes in place, we can remove the !CONFIG_DYNAMIC_CORE case from ib_srp.c This change was prompted by a build breakeage in ib_srp.c stemming from the inclusion of dynamic_debug.h unconditionally in module.h, due to commit |
||
Dave Chinner
|
e9b60c7f97 |
pcpcntr: remove percpu_counter_sum_all()
percpu_counter_sum_all() is now redundant as the race condition it
was invented to handle is now dealt with by percpu_counter_sum()
directly and all users of percpu_counter_sum_all() have been
removed.
Remove it.
This effectively reverts the changes made in
|
||
|
Dave Chinner
|
8b57b11cca |
pcpcntrs: fix dying cpu summation race
In commit
|
||
|
Dave Chinner
|
1470afefc3 |
cpumask: introduce for_each_cpu_or
Equivalent of for_each_cpu_and, except it ORs the two masks together so it iterates all the CPUs present in either mask. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
||
|
Jakub Kicinski
|
1118aa4c70 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/wireless/nl80211.c |
||
Thomas Weißschuh
|
64414da25b |
kobject: align stacktrace levels to logging message
Without an explicit level the stacktraces are printed at a default level. If this level does not match the one from the logging level it may happen that the stacktrace is shown without the message or vice versa. Both these cases are confusing, so make sure the user always sees both, the message and the stacktrace. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230311-kobject-warning-v1-2-1ebba4f71fb5@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Thomas Weißschuh
|
984063339e |
kobject: define common logging prefix
All log messages start with the prefix "kobject: ". Deduplicate this by using the pr_fmt() facility. This makes the very long log strings shorter. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230311-kobject-warning-v1-1-1ebba4f71fb5@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
ed38ff164f |
Zstd fixes for v6.3
A small number of fixes for zstd-v1.5.2. I'm not pulling in zstd-v1.5.4 from upstream this release because it didn't have any time to bake in linux-next, but I'm aiming for the next update in v6.4. I've rebased my tree onto v6.2 to remove the incorrect back merges as suggested by Linus in my initial PR for v6.3 [0]. [0] https://lore.kernel.org/lkml/C8C4DFDA-998F-48AD-93C9-DE16F8080A02@meta.com/ Signed-off-by: Nick Terrell <terrelln@fb.com> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEmIwAqlFIzbQodPwyuzRpqaNEqPUFAmQPxq4ACgkQuzRpqaNE qPUC/w/+OnUlhZu4RKQuiZsHtmtFdWBgPxti3nCC/kYdNxTcX1LXKTvVU54WpgMG pbEh2CN9l5isKOcoCOtmU6Mbt0WxUWhK5P1OGqVjrgjt3bubMlwR5t5JZ7D1RIH4 TgAFOOB64x1Q0dWSuZmkLX8rFTsu1ig8jJGpCRiKkG+ckK+PqeJLszzEmtj+bmuT fRn4WpItg9DBcoS/SBWjC9/CC1K1rzsuZghwDWzo5OP6wBF+VugMuZ/wXT9uY3yT y0lhB3mBmIZZSZwD/t7gZN3aVD8550W8taZGJ7T3fdIsurmlPKEqefIJ1bFKalfc ZR7j3v/ro3t+uwvFlzZuxnnNXSavk7yz/wLjAnQhW4RYXDt7Gso3+pDCMDHha2oE An3DqAha5KaOsJlW97mka1527El6gmK0xsAHPQ29waj1H6a7IYq2fGaFdUA/3L7c s5qtuUuhn3FyVX8POr79jPJa9xNiT4gj63V18s/4lChuHKPHBAlS07OsbbUY33Ep q+O1zb6fYQpgcCV/gv4yHKoGMdCOZzpp2VCtKS9gz/XU40NV1qLurCWM+wYJc94Y Afkthf6BLX41kmqtNzS2g/CZUN1rH3mHJrG8RKm68+rIHB4dvzG55VUwjXdj+2gY OYakXRlEw4S4YiNn4uFg6OoaSlYJJASusVK1Ed7MpnkCiLNAxS4= =1tCu -----END PGP SIGNATURE----- Merge tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux Pull zstd fixes from Nick Terrell: "A small number of fixes for zstd-v1.5.2. I'm not pulling in zstd-v1.5.4 from upstream this release because it didn't have any time to bake in linux-next, but I'm aiming for the next update in v6.4" * tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux: zstd: Fix definition of assert() lib: zstd: Backport fix for in-place decompression lib: zstd: Fix -Wstringop-overflow warning |
||
|
Rae Moar
|
2c6a96dad5 |
kunit: fix bug of extra newline characters in debugfs logs
Fix bug of the extra newline characters in debugfs logs. When a line is added to debugfs with a newline character at the end, an extra line appears in the debugfs log. This is due to a discrepancy between how the lines are printed and how they are added to the logs. Remove this discrepancy by checking if a newline character is present before adding a newline character. This should closely match the printk behavior. Add kunit_log_newline_test to provide test coverage for this issue. (Also, move kunit_log_test above suite definition to remove the unnecessary declaration prior to the suite definition) As an example, say we add these two lines to the log: kunit_log(..., "KTAP version 1\n"); kunit_log(..., "1..1"); The debugfs log before this fix: KTAP version 1 1..1 The debugfs log after this fix: KTAP version 1 1..1 Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Rae Moar
|
f9a301c331 |
kunit: fix bug in the order of lines in debugfs logs
Fix bug in debugfs logs that causes an incorrect order of lines in the
debugfs log.
Currently, the test counts lines that show the number of tests passed,
failed, and skipped, as well as any suite diagnostic lines,
appear prior to the individual results, which is a bug.
Ensure the order of printing for the debugfs log is correct. Additionally,
add a KTAP header to so the debugfs logs can be valid KTAP.
This is an example of a log prior to these fixes:
KTAP version 1
# Subtest: kunit_status
1..2
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
ok 1 kunit_status
Note the two lines with stats are out of order. This is the same debugfs
log after the fixes (in combination with the third patch to remove the
extra line):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit_status
1..2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Rae Moar
|
887d85a073 |
kunit: fix bug in debugfs logs of parameterized tests
Fix bug in debugfs logs that causes individual parameterized results to not
appear because the log is reinitialized (cleared) when each parameter is
run.
Ensure these results appear in the debugfs logs, increase log size to
allow for the size of parameterized results. As a result, append lines to
the log directly rather than using an intermediate variable that can cause
stack size warnings due to the increased log size.
Here is the debugfs log of ext4_inode_test which uses parameterized tests
before the fix:
KTAP version 1
# Subtest: ext4_inode_test
1..1
# Totals: pass:16 fail:0 skip:0 total:16
ok 1 ext4_inode_test
As you can see, this log does not include any of the individual
parametrized results.
After (in combination with the next two fixes to remove extra empty line
and ensure KTAP valid format):
KTAP version 1
1..1
KTAP version 1
# Subtest: ext4_inode_test
1..1
KTAP version 1
# Subtest: inode_test_xtimestamp_decoding
ok 1 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits
... (the rest of the individual parameterized tests)
ok 16 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra
# inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16
ok 1 inode_test_xtimestamp_decoding
# Totals: pass:16 fail:0 skip:0 total:16
ok 1 ext4_inode_test
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Nick Alcock
|
efb5b62d72 |
lib: packing: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Jason Baron
|
7deabd6749 |
dyndbg: use the module notifier callbacks
Bring dynamic debug in line with other subsystems by using the module notifier callbacks. This results in a net decrease in core module code. Additionally, Jim Cromie has a new dynamic debug classmap feature, which requires that jump labels be initialized prior to dynamic debug. Specifically, the new feature toggles a jump label from the existing dynamic_debug_setup() function. However, this does not currently work properly, because jump labels are initialized via the 'module_notify_list' notifier chain, which is invoked after the current call to dynamic_debug_setup(). Thus, this patch ensures that jump labels are initialized prior to dynamic debug by setting the dynamic debug notifier priority to 0, while jump labels have the higher priority of 1. Tested by Jim using his new test case, and I've verfied the correct printing via: # modprobe test_dynamic_debug dyndbg. Link: https://lore.kernel.org/lkml/20230113193016.749791-21-jim.cromie@gmail.com/ Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202302190427.9iIK2NfJ-lkp@intel.com/ Tested-by: Jim Cromie <jim.cromie@gmail.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> CC: Jim Cromie <jim.cromie@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Jason Baron
|
85c37208b0 |
dyndbg: remove unused 'base' arg from __ddebug_add_module()
The 'base' parameter to __ddebug_add_module() is no longer in use
after: Commit
|
||
Jonathan Neuschäfer
|
6906598f1c |
zstd: Fix definition of assert()
assert(x) should emit a warning if x is false. WARN_ON(x) emits a warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x) rather than WARN_ON(x). Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Nick Terrell <terrelln@fb.com> |
||
Nick Terrell
|
038505c41f |
lib: zstd: Backport fix for in-place decompression
Backport the relevant part of upstream commit 5b266196 [0]. This fixes in-place decompression for x86-64 kernel decompression. It uses a bound of 131072 + (uncompressed_size >> 8), which can be violated after upstream commit 6a7ede3d [1], as zstd can use part of the output buffer as temporary storage, and without this patch needs a bound of ~262144. The fix is for zstd to detect that the input and output buffers overlap, so that zstd knows it can't use the overlapping portion of the output buffer as tempoary storage. If the margin is not large enough, this will ensure that zstd will fail the decompression, rather than overwriting part of the input data, and causing corruption. This fix has been landed upstream and is in release v1.5.4. That commit also adds unit and fuzz tests to verify that the margin we use is respected, and correct. That means that the fix is well tested upstream. I have not been able to reproduce the potential bug in x86-64 kernel decompression locally, nor have I recieved reports of failures to decompress the kernel. It is possible that compression saves enough space to make it very hard for the issue to appear. I've boot tested the zstd compressed kernel on x86-64 and i386 with this patch, which uses in-place decompression, and sanity tested zstd compression in btrfs / squashfs to make sure that we don't see any issues, but other uses of zstd shouldn't be affected, because they don't use in-place decompression. Thanks to Vasily Gorbik <gor@linux.ibm.com> for debugging a related issue on s390, which was triggered by the same commit, but was a bug in how __decompress() was called [2]. And to Sasha Levin <sashal@kernel.org> for the CC alerting me of the issue. [0] |
||
|
Kees Cook
|
780f6a9afe |
lib: zstd: Fix -Wstringop-overflow warning
Fix the following -Wstringop-overflow warning when building with GCC 11+:
lib/zstd/decompress/huf_decompress.c: In function ‘HUF_readDTableX2_wksp’:
lib/zstd/decompress/huf_decompress.c:700:5: warning: ‘HUF_fillDTableX2.constprop’ accessing 624 bytes in a region of size 52 [-Wstringop-overflow=]
700 | HUF_fillDTableX2(dt, maxTableLog,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
701 | wksp->sortedSymbol, sizeOfSort,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
702 | wksp->rankStart0, wksp->rankVal, maxW,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
703 | tableLog+1,
| ~~~~~~~~~~~
704 | wksp->calleeWksp, sizeof(wksp->calleeWksp) / sizeof(U32));
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/zstd/decompress/huf_decompress.c:700:5: note: referencing argument 6 of type ‘U32 (*)[13]’ {aka ‘unsigned int (*)[13]’}
lib/zstd/decompress/huf_decompress.c:571:13: note: in a call to function ‘HUF_fillDTableX2.constprop’
571 | static void HUF_fillDTableX2(HUF_DEltX2* DTable, const U32 targetLog,
| ^~~~~~~~~~~~~~~~
by using pointer notation instead of array notation.
This is one of the last remaining warnings to be fixed before globally
enabling -Wstringop-overflow.
Co-developed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
|
||
|
Linus Torvalds
|
596ff4a09b |
cpumask: re-introduce constant-sized cpumask optimizations
Commit |
||
|
Linus Torvalds
|
20fdfd55ab |
17 hotfixes. Eight are for MM and seven are for other parts of the
kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZAO0bAAKCRDdBJ7gKXxA jo73AP0Sbgd+E0u5Hs+aACHW28FpxleVRdyexc5chXD5QsyLKgEAwjntE7jfHHYK GkUKsoWQJblgjm3ksRxdLbVkDSQ8sQE= =CQ0B -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4 |
||
Eric Biggers
|
359d62559f |
lib: parser: update documentation for match_NUMBER functions
commit |
||
Marco Elver
|
36be5cba99 |
kasan: treat meminstrinsic as builtins in uninstrumented files
Where the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, let the compiler consider
memintrinsics as builtin again.
To do so, never override memset/memmove/memcpy if the compiler does the
correct instrumentation - even on !GENERIC_ENTRY architectures.
[elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes]
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com
Fixes:
|
||
Mikhail Zaslonko
|
1c0a0af511 |
lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
DFLTCC deflate with Z_NO_FLUSH might generate a corrupted stream when the output buffer is not large enough to fit all the deflate output at once. The problem takes place on closing the deflate block since flush_pending() might leave some output bits not written. Similar problem for software deflate with Z_BLOCK flush option (not supported by kernel zlib deflate) has been fixed a while ago in userspace zlib but the fix never got to the kernel. Now flush_pending() flushes the bit buffer before copying out the byte buffer, in order to really flush as much as possible. Currently there are no users of DFLTCC deflate with Z_NO_FLUSH option in the kernel so the problem remained hidden for a while. This commit is based on the old zlib commit: https://github.com/madler/zlib/commit/0b828b4 Link: https://lkml.kernel.org/r/20230221131617.3369978-2-zaslonko@linux.ibm.com Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Gow
|
32ff6831cd |
kunit: Fix 'hooks.o' build by recursing into kunit
KUnit's 'hooks.o' file need to be built-in whenever KUnit is enabled
(even if CONFIG_KUNIT=m). We'd previously attemtped to do this by
adding 'kunit/hooks.o' to obj-y in lib/Makefile, but this caused hooks.c
to be rebuilt even when it was unchanged.
Instead, always recurse into lib/kunit using obj-y when KUnit is
enabled, and add the hooks there.
Fixes:
|
||
|
Linus Torvalds
|
0447ed0d71 |
Kernel concurrency sanitizer (KCSAN) updates for v6.3
This update fixes gcc-11 errors for x86_64 KCSAN-enabled kernel builds by selecting the CONSTRUCTORS Kconfig option. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmP4/7ATHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jH2DD/4x2xEOqXt52z0rGWjxA0TALAGbs+/U F+Eq55PtaemiL+i1Gl+D1BmJJ8WW0kPHPHCxDXbdrRgyKAkoC+w1O3eEYpldKnvE YRogJOfViCh/teJxV9f58CFrdbRTlw0Z0UMZQUWTXURG1lUPe1ZKbt58ZWbekfa3 +bPMj0nnU9TqIeMasv6puAZnhuyVyLvfF0xADYBAMDe6tmxvUoYMdRULimLZGGkW I6eEK5pOVZ5hPdEGJugM708NqQnZVdKw9RyreWqKlZJCpm85vEUKxbTn2pWkAQBo S6Z4FcKMsdjQVNlpL/AfRRLzgE8NicvSJyrxcpaEf8l3e5Cg+KFerMxlX4W52vd8 REvjb535C1pKSFVIW4koWNe+0c/Sr8CYTPydQ3JYN/iODcvmpuTzjTJ3WtMCmFrn lQBTtLOom0DmHkzu7i822MyOzJmdRqyZ0TU+aZSO1FTjN2xIdiPc+if046mOFHW+ JX1GagrI12c5tNtVc3zgzAnEsiX+vFjC7p2VMOqEBcAKi5UPAZty2jQJsFXKXXzu hQyJVSREWTwGvAjmEO7w9s5yPfy82+exzdEa9usIyxwKl/urzTdA2Qjro5kVpB/t 9+p33z6hyvELkKNOAdQQmVqXUec1PpmPkRqB9qR8jvEGGG4V5Pfoflf7irqqfX0q 4zatR+yf1cpbEQ== =oX8A -----END PGP SIGNATURE----- Merge tag 'kcsan.2023.02.24a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull kernel concurrency sanitizer (KCSAN) updates from Paul McKenney: "This fixes gcc-11 errors for x86_64 KCSAN-enabled kernel builds by selecting the CONSTRUCTORS Kconfig option" * tag 'kcsan.2023.02.24a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: kcsan: select CONFIG_CONSTRUCTORS |
||
|
Linus Torvalds
|
7c3dc440b1 |
cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
||
|
Linus Torvalds
|
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|