IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The newly added congestion mgmt framework is seeing unexpected congestion
FPINs and signals. In analysis, time values given to the adapter are not
at hard time intervals. Thus the drift vs the transfer count seen is
affecting how the framework manages things.
Adjust counters to cover the drift.
Link: https://lore.kernel.org/r/20210910233159.115896-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Injecting errors on the PCI slot while the driver is handling NVMe I/O will
cause crashes and hangs.
There are several rather difficult scenarios occurring. The main issue is
that the adapter can report a PCI error before or simultaneously to the PCI
subsystem reporting the error. Both paths have different entry points and
currently there is no interlock between them. Thus multiple teardown paths
are competing and all heck breaks loose.
Complicating things is the NVMs path. To a large degree, I/O was able to be
shutdown for a full FC port on the SCSI stack. But on NVMe, there isn't a
similar call. At best, it works on a per-controller basis, but even at the
controller level, it's a controller "reset" call. All of which means I/O is
still flowing on different CPUs with reset paths expecting hw access
(mailbox commands) to execute properly.
The following modifications are made:
- A new flag is set in PCI error entrypoints so the driver can track being
called by that path.
- An interlock is added in the SLI hw error path and the PCI error path
such that only one of the paths proceeds with the teardown logic.
- RPI cleanup is patched such that RPIs are marked unregistered w/o mbx
cmds in cases of hw error.
- If entering the SLI port re-init calls, a case where SLI error teardown
was quick and beat the PCI calls now reporting error, check whether the
SLI port is still live on the PCI bus.
- In the PCI reset code to bring the adapter back, recheck the IRQ
settings. Different checks for SLI3 vs SLI4.
- In I/O completions, that may be called as part of the cleanup or
underway just before the hw error, check the state of the adapter. If
in error, shortcut handling that would expect further adapter
completions as the hw error won't be sending them.
- In routines waiting on I/O completions, which may have been in progress
prior to the hw error, detect the device is being torn down and abort
from their waits and just give up. This points to a larger issue in the
driver on ref-counting for data structures, as it doesn't have
ref-counting on q and port structures. We'll do this fix for now as it
would be a major rework to be done differently.
- Fix the NVMe cleanup to simulate NVMe I/O completions if I/O is being
failed back due to hw error.
- In I/O buf allocation, done at the start of new I/Os, check hw state and
fail if hw error.
Link: https://lore.kernel.org/r/20210910233159.115896-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A prior patch inadvertently caused lpfc_sli_sum_iocb() to exclude counting
of outstanding aborted I/Os and ABORT IOCBs. Thus,
lpfc_reset_flush_io_context() called from any TMF routine does not properly
wait to flush all outstanding FCP IOCBs leading to a block layer crash on
an invalid scsi_cmnd->request pointer.
kernel BUG at ../block/blk-core.c:1489!
RIP: 0010:blk_requeue_request+0xaf/0xc0
...
Call Trace:
<IRQ>
__scsi_queue_insert+0x90/0xe0 [scsi_mod]
blk_done_softirq+0x7e/0x90
__do_softirq+0xd2/0x280
irq_exit+0xd5/0xe0
do_IRQ+0x4c/0xd0
common_interrupt+0x87/0x87
</IRQ>
Fix by separating out the LPFC_IO_FCP, LPFC_IO_ON_TXCMPLQ,
LPFC_DRIVER_ABORTED, and CMD_ABORT_XRI_CN || CMD_CLOSE_XRI_CN checks into a
new lpfc_sli_validate_fcp_iocb_for_abort() routine when determining to
build an ABORT iocb.
Restore lpfc_reset_flush_io_context() functionality by including counting
of outstanding aborted IOCBs and ABORT IOCBs in lpfc_sli_sum_iocb().
Link: https://lore.kernel.org/r/20210910233159.115896-9-jsmart2021@gmail.com
Fixes: e1364711359f ("scsi: lpfc: Fix illegal memory access on Abort IOCBs")
Cc: <stable@vger.kernel.org> # v5.12+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, we hold off unregistering with NVMe transport layer until GID_FT
or ADISC completes upon receipt of RSCN. In the ADISC discovery routine,
for nodes not found in the GID_FT response, the nodes are unregistered from
the SCSI transport but not UNREG_RPI'd. Meaning outstanding WQEs continue
to be outstanding and were not failed back to the OS. If an NVMe device,
this mean there wasn't initial termination of the I/Os so they could be
issued on a different NVMe path.
Fix by unregistering the RPI so that I/O is cancelled.
Link: https://lore.kernel.org/r/20210910233159.115896-8-jsmart2021@gmail.com
Fixes: 0614568361b0 ("scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In pt-2-pt mode, the initiator does not log into the target after a PRLI
error. In pt-2-pt mode, the target responded to the PRLI by sending a
LOGO. The LOGO causes all ELS and I/Os to be aborted. This caused the PRLI
to fail. The PRLI completion path caused the discovery node to be dropped
to avoid being stick in an UNUSED (not logged in) state. As the node was
dropped there is no retry of the login and as it is pt-2-pt, there is no
RSCN to retrigger discovery. Thus the other end is not seen by the OS.
Fix by ensuring the discovery node is not dropped if connecting pt-2-pt.
This will cause PLOGI to be retried.
Link: https://lore.kernel.org/r/20210910233159.115896-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On link up and node discovery, a remote port is registered with the SCSI
transport and the driver sets fc4_xpt_flags to track transport
registration.
A link down event causes the driver to deregister with the SCSI transport,
starting the devloss timer, and calls a local unreg routine to clear the
login state. Part of the login state is the fc4_xpt_flags. However, with
tape devices that support sequence level error recovery, which wants to
preserve the login, the local unreg routine is skipped, thus the flags
aren't cleared.
A subsequent link up, ADISC is performed and the lpfc_nlp_reg_node()
routine is called. As the fc4_xpt_flags is not clear, it's believed the
node is already registered with the transport. Unfortunately, the
registration was already terminated. Eventually the devloss tmo timer
expires and tears down the device.
Fix by ensuring the tape device, known by the ADISC flag, is always
unregistered if the link drops.
Link: https://lore.kernel.org/r/20210910233159.115896-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A test scenario encountered an unload hang while an FLOGI ELS was in flight
when a link down condition occurred. The driver fails unload as it never
releases the fport node.
For most nodes, when the link drops, devloss tmo is started and the timeout
will cause the final node release. For the Fport, as it has not yet
registered with the SCSI transport, there is no devloss timer to be
started, so there is no final release. Additionally, the link down
sequence causes ABORTS to be issued for pending ELS's. The completions from
the ABORTS perform the release of node references. However, as the adapter
is being reset to be unloaded, those completions will never occur.
Fix by the following:
- In the ELS cleanup, recognize when unloading and place the ELS's on a
different list that immediately cleans up/completes the ELS's. It's
recognized that this condition primarily affects only the fport, with
other ports having normal clean up logic that handles things.
- Resolve the devloss issue by, when cleaning up nodes on after link down,
recognizing when the fabric node does not have a completed state (its
state is UNUSED) and removing a reference so the node can delete after
the ELS reference is released.
Link: https://lore.kernel.org/r/20210910233159.115896-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A test scenario has a target issuing a TPLS after accepting the driver's
PRLI. TPLS is not supported by the driver so it rejects the ELS. However,
the reject was only happening on the primary N_Port. If the TPLS was to a
NPIV vport, not only would it reject the ELS, but it would act on the TPLS,
starting devloss, then unregister from the SCSI transport and release the
node. When devloss expired, it would access the node again and cause a page
faul.
Fix by altering the NPIV code to recognize that a correctly registered node
can reject unsolicited ELS I/O and to not unregister with the SCSI
transport and tear the node down. Add a check of the fc4_xpt_flags so that
only a zero value allows the unreg and teardown.
Link: https://lore.kernel.org/r/20210910233159.115896-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a rarely executed path, FLOGI failure, there is a refcounting error. If
FLOGI completed with an error, typically a timeout, the initial completion
handler would remove the job reference. However, the job completion isn't
the actual end of the job/exchange as the timeout usually initiates an
ABTS, and upon that ABTS completion, a final completion is sent. The driver
removes the reference again in the final completion. Thus the imbalance.
In the buggy cases, if there was a link bounce while the delayed response
is outstanding, the fport node may be referenced again but there was no
additional reference as it is already present. The delayed completion then
occurs and removes the last reference freeing the node and causing issues
in the link up processed that is using the node.
Fix this scenario by removing the snippet that removed the reference in the
initial FLOGI completion. The bad snippet was poorly trying to identify the
FLOGI as OK to do so by realizing the node was not registered with either
SCSI or NVMe transport.
Link: https://lore.kernel.org/r/20210910233159.115896-3-jsmart2021@gmail.com
Fixes: 618e2ee146d4 ("scsi: lpfc: Fix FLOGI failure due to accessing a freed node")
Cc: <stable@vger.kernel.org> # v5.13+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output. The job is then added to a
completions list for cancellation.
Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter. If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.
Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.
Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck REVIEW:
./drivers/scsi/lpfc/lpfc_scsi.c:1498:9-12 REVIEW Unneeded variable
Link: https://lore.kernel.org/r/20210831114058.17817-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cm>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Chi Minghao <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Kernel test robot flagged the following warning:
".../lpfc_init.c:7788:35: error: 'struct lpfc_sli4_hba' has no member
named 'c_stat'"
Reviewing this issue highlighted that one of the recent patches caused the
driver to no longer compile cleanly if CONFIG_DEBUG_FS is not set.
Correct the different areas that are failing to compile.
Link: https://lore.kernel.org/r/20210908050927.37275-1-jsmart2021@gmail.com
Fixes: 02243836ad6f ("scsi: lpfc: Add support for the CM framework")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The kernel test robot reported the following sparse warning:
".../lpfc_els.c:3984:25: sparse: sparse: cast from restricted __be16"
For the error being flagged, using be32_to_cpu() on a be16 data type, it
was simple enough. But a review of other elements and warnings were also
evaluated.
This patch corrected several items in the original patch:
- Using be32_to_cpu() on a be16 data type
- cpu_to_le32() used on a std uint32_t (CPU) data type.
Note: This is a byte array, but stored in LE layout by hardware at
32-bit boundaries. So it possibly needed conversion.
- Using cpu_to_le32() on a std uint16_t and assigned to a char typeA
- Using le32_to_cpu() on a le16 type
- Missing cpu_to_le16() on an assignment
Link: https://lore.kernel.org/r/20210830231243.6227-1-jsmart2021@gmail.com
Fixes: 9064aeb2df8e ("scsi: lpfc: Add EDC ELS support")
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
Use the SCSI midlayer interfaces to query protection interval, reference
tag, per-command DIX flags, and logical block count.
Link: https://lore.kernel.org/r/20210817025014.12085-3-martin.petersen@oracle.com
CC: James Smart <james.smart@broadcom.com>
CC: Dick Kennedy <dick.kennedy@broadcom.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2021 for files modified in the 14.0.0.1 patch set.
Link: https://lore.kernel.org/r/20210816162901.121235-17-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.0.0.1
Link: https://lore.kernel.org/r/20210816162901.121235-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a bsg ioctl to allow user applications to retrieve the adapter
congestion management framework buffer.
Link: https://lore.kernel.org/r/20210816162901.121235-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow abbreviated cm framework status information to be obtained via sysfs.
Link: https://lore.kernel.org/r/20210816162901.121235-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support via debugfs to report the cm statistics, cm enablement, and rx
monitor information.
Link: https://lore.kernel.org/r/20210816162901.121235-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the logic to move the congestion management and event information into
the cmd statistics buffer maintained for the adapter. The update includes
rolling up values for the last minute, hour, and day information.
Link: https://lore.kernel.org/r/20210816162901.121235-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver provides overwatch of the cm behavior by maintaining a set of rx
I/O statistics. This information is also used in later updating of the cm
statistics buffer.
Link: https://lore.kernel.org/r/20210816162901.121235-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Complete the enablement of the cm framework feature in the adapter. Perform
the following:
- Detect the presence of the congestion management framework feature.
When the cm framework is present:
- Issue the SET_FEATURE command to enable the feature.
- Register the cm statistics buffer with the adapter.
- Read the cm enablement buffer to determine the cm framework state for cm
management.
When cm management is enabled:
- Monitor all FPIN and congestion signalling events, incrementing
counters.
- Regularly sync with the adapter to communicate congestion events and to
receive an rx request limit.
- Monitor requests for rx data and ensure that no more than the
adapter prescribed limit is issued on the link. If the limit is
exceeded, SCSI and/or NVMe traffic is temporarily suspended.
- Maintain the minute, hourly, daily statistics buffer.
- Monitor for congestion enablement change events, causing a reread of the
enablement buffer and acting on any change in enablement.
And:
- Add teardown logic, including buffer deregistration, on adapter
detachment or reset.
Link: https://lore.kernel.org/r/20210816162901.121235-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When congestion mgmt is enabled, cmf has the driver regularly issue a
command to synchronize reporting of congestion mgmt events such as fpin and
signal delivery.
This patch adds the definition of the CMF_SYNC WQE and its CQE fields as
well as support for issuing the command. The patch also adds the few
remaining cmf-related SLI additions, such as feature definition for
enablement of CMF and notifications to the driver if the cm enablement mode
changes.
Link: https://lore.kernel.org/r/20210816162901.121235-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As part of the cmf framework, the firmware maintains a table with
congestion related state information, specifically whether enabled and if
enabled, whether monitoring or actively managing congestion.
Add definition of the table and add support to read the table from the
adapter and determine if it is enabled. In support of this, the READ_OBJECT
mailbox command definition is added to the driver.
Link: https://lore.kernel.org/r/20210816162901.121235-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cmf framework requires the driver to maintain a cm statistics table,
accessible inband, of congestion related statistics that are reported per
minute, rolled up to per hour, and rolled up again per day. Several days
worth may be maintained. The table is registered with the adapter when the
MIB feature is enabled.
Add definition of the table and add support to register the table with the
adapter. Includes definition and initialization of event counters that are
later added to the statistics table.
Link: https://lore.kernel.org/r/20210816162901.121235-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When congestion management is enabled, issue EDC ELS to register congestion
signaling capabilities with the fabric. The response handling will process
the fabric parameters and set the reporting parameters.
Similarly, add support for receiving an EDC request from the fabric
generating a corresponding response.
Implement handlers for congestion signals from the fabric and maintain
statistics for them.
Link: https://lore.kernel.org/r/20210816162901.121235-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Expand FPIN logging:
- Display Attached Port Names for Link Integrity and Peer Congestion
events
- Log Delivery, Peer Congestion, and Congestion events
- Sanity check FPIN descriptor lengths when processing FPIN descriptors.
Log RDF events when congestion logging is enabled.
Link: https://lore.kernel.org/r/20210816162901.121235-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MIB support is currently limited to detecting support in the adapter and
ensuring FDMI support is enabled if present. For the new framework MIB
support also requires active enablement of support via the SET_FEATURES
command with the firmware.
Rework the MIB detection and enablement for the following:
- Move detection away from the get_sli4_parameters routine, and into the
hba_setup path. get_sli4_parameters is only called once at attachment
while hba_setup is called as part of any SLI port reset path. This
ensures detection after firmware download.
- Update SET_FEATURES mbx command for the MIB enablement feature and add
support for the feature.
- Create the cmf_setup routine to encapsulate the detection of MIB support
and perform the enablement of the MIB support feature.
Link: https://lore.kernel.org/r/20210816162901.121235-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement the SET_HOST_DATA mbox command to set date / time during
initialization. It is used by the firmware for various purposes including
congestion management and firmware dumps.
Link: https://lore.kernel.org/r/20210816162901.121235-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-28-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_sli4_nvmet_xri_aborted() routine takes out the abts_buf_list_lock
and traverses the buffer contexts to match the xri. Upon match, it then
takes the context lock before potentially removing the context from the
associated buffer list. This violates the lock hierarchy used elsewhere in
the driver of locking context, then the abts_buf_list_lock - thus a
possible deadlock.
Resolve by: after matching, release the abts_buf_list_lock, then take the
context lock, and if to be deleted from the list, retake the
abts_buf_list_lock, maintaining lock hierarchy. This matches same list lock
hierarchy as elsewhere in the driver
Link: https://lore.kernel.org/r/20210730163309.25809-1-jsmart2021@gmail.com
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pointer pcmd is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Link: https://lore.kernel.org/r/20210721095350.41564-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
Update copyrights to 2021 for files modified in the 14.0.0.0 patch set.
Link: https://lore.kernel.org/r/20210722221721.74388-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.0.0.0.
Link: https://lore.kernel.org/r/20210722221721.74388-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update routines to support 256 Gb link speed for LPe37000/LPe38000
adapters. 256 Gb speeds can be seen on trunk links.
Link: https://lore.kernel.org/r/20210722221721.74388-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Support for Topology and RAS logging capabilities were qualified by PCIe
device ID checks necessitating additional driver changes for new device
IDs.
Reduce reliance on specific PCIe device IDs by substituting checks for SLI
family information. This automatically picks up support on the newest
hardware.
Link: https://lore.kernel.org/r/20210722221721.74388-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On the newer hardware, CQ_ID values can be larger than seen on previous
generations. This exposed an issue in the driver where its definition of
cq_id in the RQ Create mailbox cmd was too small, thus the cq_id was
truncated, causing the command to fail.
Revise the RQ_CREATE CQ_ID field to its proper size (16 bits).
Link: https://lore.kernel.org/r/20210722221721.74388-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update supported pci_device_id table to include the values for the G7+ ASIC
Device ID utilized by LPe37xxx and LPe38xxx series of adapters. The
default reporting string will be "LPe38000".
Link: https://lore.kernel.org/r/20210722221721.74388-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights for files modified by the 12.8.0.11 patch set.
Link: https://lore.kernel.org/r/20210707184351.67872-21-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.11.
Link: https://lore.kernel.org/r/20210707184351.67872-20-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a node moves to NPR state due to a device recovery event, the
nlp_fc4_types in the node are cleared. An ADISC received for a node in the
NPR state triggers an ADISC. Without fc4 types being known, the calls to
register with the transport are no-op'd, thus no additional references are
placed on the node by transport re-registrations. A subsequent RSCN could
trigger another unregister request, which will decrement the reference
counts, leading to the ref count hitting zero and the node being freed
while futher discovery on the node is being attempted by the RSCN event
handling.
Fix by skipping the trigger of an ADISC when in NPR state. The normal ADISC
process will kick off in the regular discovery path after receiving a
response from name server.
Link: https://lore.kernel.org/r/20210707184351.67872-19-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During RSCN storms, some instances of LIP on SLI-3 adapters lead to a
situation where FLOGIs keep failing with firmware indicating an illegal
command error code. This situation was preceded by an ADISC completion
that was processed while the link was down. This path on SLI-3 performs a
CLEAR_LA and attempts to activate a VPI with REG_VPI. Later, as the FLOGI
completes, it's no longer in sync with the VPI state. In SLI-3 it is
illegal to have an active VPI during FLOGI.
Resolve by circumventing the SLI-3 path that performs the CLEAR_LA and
REG_VPI. The path will be taken after the FLOGI after the next Link Up.
Link: https://lore.kernel.org/r/20210707184351.67872-18-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the PLOGI and ADISC completion handling, the device removal event could
be skipped during some link errors. This could leave a stale node in UNUSED
state. Driver unload would hang for a long time waiting for this node to
be freed.
Resolve by taking the following steps:
- Always post ADISC completion events to discovery state machine upon
ADISC completion.
- In case of a completion error for PLOGI/ADISC, ensure that init refcount
is dropped if not registered with transport.
Link: https://lore.kernel.org/r/20210707184351.67872-17-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state
are moved to NPR state in order to revalidate the login. This triggers an
immediate unregister from SCSI/NVMe backend. The assumption is that the
node may be missing. The re-registration with the backend happens after
either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or
when ADISC completes successfully (rediscover with ADISC enabled).
However, the NVMe-FC standard provides for an RSCN to be triggered when
the remote port supports a discovery controller and there was a change
of discovery log content. As the remote port typically also supports
storage subsystems, this unregister causes all storage controller
connections to fail and require reconnect.
Correct by reworking the code to ensure that the unregistration only occurs
when a login state is truly terminated, thereby leaving the NVMe storage
controllers in place.
The changes made are:
- Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry.
- Do not clear wwpn/wwnn values upon ADISC failure.
- Move MAPPED nodes to NPR during RSCN processing, but do not unregister
with transport. On GIDFT completion, identify missing nodes (not marked
NLP_NPR_2B_DISC) and unregister them.
- Perform unregistration for nodes that will go through ADISC processing
if ADISC completion fails.
- Successful ADISC completion will move node back to MAPPED state.
Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Assign a default value of 1 to driver module parameter lpfc_use_adisc.
Link: https://lore.kernel.org/r/20210707184351.67872-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SLI4 interface changed the manner used to indicate PBDE support.
Rework the driver to check for PBDE support via the PBDE feature bit in
COMMON_GET_SLI4_PARAMETERS.
Link: https://lore.kernel.org/r/20210707184351.67872-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mailbox commands sent via ioctl/bsg from user applications may be
interrupted from processing by a concurrently triggered PCI function
reset. The command will not generate a completion due to the reset. This
results in a user application hang waiting for the mailbox command to
complete.
Resolve by changing the function reset handler to detect that there was an
outstanding mailbox command and simulate a mailbox completion. Add some
additional debug when a mailbox command times out.
Link: https://lore.kernel.org/r/20210707184351.67872-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_offline_prep() an RPI is freed and nlp_rpi set to 0xFFFF before
calling lpfc_unreg_rpi(). Unfortunately, lpfc_unreg_rpi() uses nlp_rpi to
index the sli4_hba.rpi_ids[] array.
In lpfc_offline_prep(), unreg rpi before freeing the rpi.
Link: https://lore.kernel.org/r/20210707184351.67872-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
