IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull networking fixes from David Miller:
1) There was a simplification in the ipv6 ndisc packet sending
attempted here, which avoided using memory accounting on the
per-netns ndisc socket for sending NDISC packets. It did fix some
important issues, but it causes regressions so it gets reverted here
too. Specifically, the problem with this change is that the IPV6
output path really depends upon there being a valid skb->sk
attached.
The reason we want to do this change in some form when we figure out
how to do it right, is that if a device goes down the ndisc_sk
socket send queue will fill up and block NDISC packets that we want
to send to other devices too. That's really bad behavior.
Hopefully Thomas can come up with a better version of this change.
2) Fix a severe TCP performance regression by reverting a change made
to dev_pick_tx() quite some time ago. From Eric Dumazet.
3) TIPC returns wrongly signed error codes, fix from Erik Hugne.
4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the
skb->sk too early. Fix from Li Hongjun.
5) RAW ipv4 sockets can use the wrong routing key during lookup, from
Chris Clark.
6) Similar to #1 revert an older change that tried to use plain
alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner
mark which needs to see the skb->sk for such frames. From Phil
Oester.
7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz,
specifically in the handling of virtual functions.
8) IPSEC path error propagations to sockets is not done properly when
we have v4 in v6, and v6 in v4 type rules. Fix from Hannes Frederic
Sowa.
9) Fix missing channel context release in mac80211, from Johannes Berg.
10) Fix network namespace handing wrt. SCM_RIGHTS, from Andy
Lutomirski.
11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic
drivers. From Michal Schmidt.
12) Hopefully a complete and correct fix for the genetlink dump locking
and module reference counting. From Pravin B Shelar.
13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir.
14) Fix handling of timestamp offset when restoring a snapshotted TCP
socket. From Andrew Vagin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
net: fec: fix time stamping logic after napi conversion
net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay
mISDN: return -EINVAL on error in dsp_control_req()
net: revert 8728c544a9c ("net: dev_pick_tx() fix")
Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages"
ipv4 tunnels: fix an oops when using ipip/sit with IPsec
tipc: set sk_err correctly when connection fails
tcp: tcp_make_synack() should use sock_wmalloc
bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones
ipv6: Don't depend on per socket memory for neighbour discovery messages
ipv4: sendto/hdrincl: don't use destination address found in header
tcp: don't apply tsoffset if rcv_tsecr is zero
tcp: initialize rcv_tstamp for restored sockets
net: xilinx: fix memleak
net: usb: Add HP hs2434 device to ZLP exception table
net: add cpu_relax to busy poll loop
net: stmmac: fixed the pbl setting with DT
genl: Hold reference on correct module while netlink-dump.
genl: Fix genl dumpit() locking.
xfrm: Fix potential null pointer dereference in xdst_queue_output
...
Remove the test for the impossible case where tsk->nsproxy == NULL. Fork
will never be called with tsk->nsproxy == NULL.
Only call get_nsproxy when we don't need to generate a new_nsproxy,
and mark the case where we don't generate a new nsproxy as likely.
Remove the code to drop an unnecessarily acquired nsproxy value.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Serge Hallyn <serge.hallyn@ubuntu.com> writes:
> Since commit af4b8a83add95ef40716401395b44a1b579965f4 it's been
> possible to get into a situation where a pidns reaper is
> <defunct>, reparented to host pid 1, but never reaped. How to
> reproduce this is documented at
>
> https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1168526
> (and see
> https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1168526/comments/13)
> In short, run repeated starts of a container whose init is
>
> Process.exit(0);
>
> sysrq-t when such a task is playing zombie shows:
>
> [ 131.132978] init x ffff88011fc14580 0 2084 2039 0x00000000
> [ 131.132978] ffff880116e89ea8 0000000000000002 ffff880116e89fd8 0000000000014580
> [ 131.132978] ffff880116e89fd8 0000000000014580 ffff8801172a0000 ffff8801172a0000
> [ 131.132978] ffff8801172a0630 ffff88011729fff0 ffff880116e14650 ffff88011729fff0
> [ 131.132978] Call Trace:
> [ 131.132978] [<ffffffff816f6159>] schedule+0x29/0x70
> [ 131.132978] [<ffffffff81064591>] do_exit+0x6e1/0xa40
> [ 131.132978] [<ffffffff81071eae>] ? signal_wake_up_state+0x1e/0x30
> [ 131.132978] [<ffffffff8106496f>] do_group_exit+0x3f/0xa0
> [ 131.132978] [<ffffffff810649e4>] SyS_exit_group+0x14/0x20
> [ 131.132978] [<ffffffff8170102f>] tracesys+0xe1/0xe6
>
> Further debugging showed that every time this happened, zap_pid_ns_processes()
> started with nr_hashed being 3, while we were expecting it to drop to 2.
> Any time it didn't happen, nr_hashed was 1 or 2. So the reaper was
> waiting for nr_hashed to become 2, but free_pid() only wakes the reaper
> if nr_hashed hits 1.
The issue is that when the task group leader of an init process exits
before other tasks of the init process when the init process finally
exits it will be a secondary task sleeping in zap_pid_ns_processes and
waiting to wake up when the number of hashed pids drops to two. This
case waits forever as free_pid only sends a wake up when the number of
hashed pids drops to 1.
To correct this the simple strategy of sending a possibly unncessary
wake up when the number of hashed pids drops to 2 is adopted.
Sending one extraneous wake up is relatively harmless, at worst we
waste a little cpu time in the rare case when a pid namespace
appropaches exiting.
We can detect the case when the pid namespace drops to just two pids
hashed race free in free_pid.
Dereferencing pid_ns->child_reaper with the pidmap_lock held is safe
without out the tasklist_lock because it is guaranteed that the
detach_pid will be called on the child_reaper before it is freed and
detach_pid calls __change_pid which calls free_pid which takes the
pidmap_lock. __change_pid only calls free_pid if this is the
last use of the pid. For a thread that is not the thread group leader
the threads pid will only ever have one user because a threads pid
is not allowed to be the pid of a process, of a process group or
a session. For a thread that is a thread group leader all of
the other threads of that process will be reaped before it is allowed
for the thread group leader to be reaped ensuring there will only
be one user of the threads pid as a process pid. Furthermore
because the thread is the init process of a pid namespace all of the
other processes in the pid namespace will have also been already freed
leading to the fact that the pid will not be used as a session pid or
a process group pid for any other running process.
CC: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Tested-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull cgroup fix from Tejun Heo:
"During the percpu reference counting update which was merged during
v3.11-rc1, the cgroup destruction path was updated so that a cgroup in
the process of dying may linger on the children list, which was
necessary as the cgroup should still be included in child/descendant
iteration while percpu ref is being killed.
Unfortunately, I forgot to update cgroup destruction path accordingly
and cgroup destruction may fail spuriously with -EBUSY due to
lingering dying children even when there's no live child left - e.g.
"rmdir parent/child parent" will usually fail.
This can be easily fixed by iterating through the children list to
verify that there's no live child left. While this is very late in
the release cycle, this bug is very visible to userland and I believe
the fix is relatively safe.
Thanks Hugh for spotting and providing fix for the issue"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix rmdir EBUSY regression in 3.11
The event stream is not always parsable because the format of a sample
is dependent on the sample_type of the selected event. When there is
more than one selected event and the sample_types are not the same then
parsing becomes problematic. A sample can be matched to its selected
event using the ID that is allocated when the event is opened.
Unfortunately, to get the ID from the sample means first parsing it.
This patch adds a new sample format bit PERF_SAMPLE_IDENTIFER that puts
the ID at a fixed position so that the ID can be retrieved without
parsing the sample. For sample events, that is the first position
immediately after the header. For non-sample events, that is the last
position.
In this respect parsing samples requires that the sample_type and ID
values are recorded. For example, perf tools records struct
perf_event_attr and the IDs within the perf.data file. Those must be
read first before it is possible to parse samples found later in the
perf.data file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377591794-30553-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On 3.11-rc we are seeing cgroup directories left behind when they should
have been removed. Here's a trivial reproducer:
cd /sys/fs/cgroup/memory
mkdir parent parent/child; rmdir parent/child parent
rmdir: failed to remove `parent': Device or resource busy
It's because cgroup_destroy_locked() (step 1 of destruction) leaves
cgroup on parent's children list, letting cgroup_offline_fn() (step 2 of
destruction) remove it; but step 2 is run by work queue, which may not
yet have removed the children when parent destruction checks the list.
Fix that by checking through a non-empty list of children: if every one
of them has already been marked CGRP_DEAD, then it's safe to proceed:
those children are invisible to userspace, and should not obstruct rmdir.
(I didn't see any reason to keep the cgrp->children checks under the
unrelated css_set_lock, so moved them out.)
tj: Flattened nested ifs a bit and updated comment so that it's
correct on both for-3.11-fixes and for-3.12.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If !PREEMPT, a kworker running work items back to back can hog CPU.
This becomes dangerous when a self-requeueing work item which is
waiting for something to happen races against stop_machine. Such
self-requeueing work item would requeue itself indefinitely hogging
the kworker and CPU it's running on while stop_machine would wait for
that CPU to enter stop_machine while preventing anything else from
happening on all other CPUs. The two would deadlock.
Jamie Liu reports that this deadlock scenario exists around
scsi_requeue_run_queue() and libata port multiplier support, where one
port may exclude command processing from other ports. With the right
timing, scsi_requeue_run_queue() can end up requeueing itself trying
to execute an IO which is asked to be retried while another device has
an exclusive access, which in turn can't make forward progress due to
stop_machine.
Fix it by invoking cond_resched() after executing each work item.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jamie Liu <jamieliu@google.com>
References: http://thread.gmane.org/gmane.linux.kernel/1552567
Cc: stable@vger.kernel.org
--
kernel/workqueue.c | 9 +++++++++
1 file changed, 9 insertions(+)
padata_cpu_callback() takes pinst->lock, to avoid taking
an uninitialized lock, register the notifier after it's
initialization.
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Share code between CPU_ONLINE and CPU_DOWN_FAILED, same to
CPU_DOWN_PREPARE and CPU_UP_CANCELED.
It will fix 2 bugs:
"not check the return value of __padata_remove_cpu() and __padata_add_cpu()".
"need add 'break' between CPU_UP_CANCELED and CPU_DOWN_FAILED".
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Correct an issue with /proc/timer_list reported by Holger.
When reading from the proc file with a sufficiently small buffer, 2k so
not really that small, there was one could get hung trying to read the
file a chunk at a time.
The timer_list_start function failed to account for the possibility that
the offset was adjusted outside the timer_list_next.
Signed-off-by: Nathan Zimmer <nzimmer@sgi.com>
Reported-by: Holger Hans Peter Freyther <holger@freyther.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Berke Durak <berke.durak@xiphos.com>
Cc: Jeff Layton <jlayton@redhat.com>
Tested-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> # 3.10.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ca8bdcaff0 ("cgroup: make cgroup_css() take cgroup_subsys * instead
and allow NULL subsys") missed one conversion in css_from_id(), which
was newly added. As css_from_id() doesn't have any user yet, this
doesn't break anything other than generating a build warning.
Convert it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
nsproxy.pid_ns is *not* the task's pid namespace. The name should clarify
that.
This makes it more obvious that setns on a pid namespace is weird --
it won't change the pid namespace shown in procfs.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rely on the fact that another flavor of the filesystem is already
mounted and do not rely on state in the user namespace.
Verify that the mounted filesystem is not covered in any significant
way. I would love to verify that the previously mounted filesystem
has no mounts on top but there are at least the directories
/proc/sys/fs/binfmt_misc and /sys/fs/cgroup/ that exist explicitly
for other filesystems to mount on top of.
Refactor the test into a function named fs_fully_visible and call that
function from the mount routines of proc and sysfs. This makes this
test local to the filesystems involved and the results current of when
the mounts take place, removing a weird threading of the user
namespace, the mount namespace and the filesystems themselves.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It seems GCC generates a better code in that way, so I changed that statement.
Btw, they have the same semantic, so I'm sending this patch due to performance issues.
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Raphael S.Carvalho <raphael.scarv@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
cgroup_event will be moved to its only user - memcg. Replace
__d_cgrp() usage with css_from_dir(), which is already exported. This
also simplifies the code a bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Currently, each registered cgroup_event holds an extra reference to
the cgroup. This is a bit weird as events are subsystem specific and
will also be incorrect in the planned unified hierarchy as css
(cgroup_subsys_state) may come and go dynamically across the lifetime
of a cgroup. Holding onto cgroup won't prevent the target css from
going away.
Update cgroup_event to hold onto the css the traget file belongs to
instead of cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
When cgroup files are created, cgroup core automatically prepends the
name of the subsystem as prefix. This patch adds CFTYPE_NO_ which
disables the automatic prefix. This is to work around historical
baggages and shouldn't be used for new files.
This will be used to move "cgroup.event_control" from cgroup core to
memcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Glauber Costa <glommer@gmail.com>
cgroup_css() is no longer used in hot paths. Make it take struct
cgroup_subsys * and allow the users to specify NULL subsys to obtain
the dummy_css. This removes open-coded NULL subsystem testing in a
couple users and generally simplifies the code.
After this patch, css_from_dir() also allows NULL @ss and returns the
matching dummy_css. This behavior change doesn't affect its only user
- perf.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
cgroup_css_from_dir() will grow another user. In preparation, make
the following changes.
* All css functions are prefixed with just "css_", rename it to
css_from_dir().
* Take dentry * instead of file * as dentry is what ultimately
identifies a cgroup and file may not always be available. Note that
the function now checkes whether @dentry->d_inode is NULL as the
caller now may specify a negative dentry.
* Make it take cgroup_subsys * instead of integer subsys_id. This
simplifies the function and allows specifying no subsystem for
cgroup->dummy_css.
* Make return section a bit less verbose.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
The dev_attrs field of struct bus_type is going away soon, dev_groups
should be used instead. This converts the workqueue bus code to use
the correct field.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull cgroup fix from Tejun Heo:
"A late fix for cgroup.
This fixes a behavior regression visible to userland which was created
by a commit merged during -rc1. While the behavior change isn't too
likely to be noticeable, the fix is relatively low risk and we'll need
to backport it through -stable anyway if the bug gets released"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix a regression in validating config change
Allow tracer instances to disable tracing by cpu by moving
the static global tracing_cpumask into trace_array.
Link: http://lkml.kernel.org/r/921622317f239bfc2283cac2242647801ef584f2.1375980149.git.azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move trace_module_nb under CONFIG_MODULES and kill the dummy
trace_module_notify(). Imho it doesn't make sense to define
"struct notifier_block" and its .notifier_call just to avoid
"ifdef" in event_trace_init(), and all other !CONFIG_MODULES
code has already gone away.
Link: http://lkml.kernel.org/r/20130731173137.GA31043@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that event_create_dir() and __trace_add_new_event() always
use the same file_operations we can kill these arguments and
simplify the code.
Link: http://lkml.kernel.org/r/20130731173135.GA31040@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_create_file_ops() allocates the copy of id/filter/format/enable
file_operations to set "f_op->owner = mod" for fops_get().
However after the recent changes there is no reason to prevent rmmod
even if one of these files is opened. A file operation can do nothing
but fail after remove_event_file_dir() clears ->i_private for every
file removed by trace_module_remove_events().
Kill "struct ftrace_module_file_ops" and fix the compilation errors.
Link: http://lkml.kernel.org/r/20130731173132.GA31033@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
init_syscall_trace() can only be called during kernel bootup only, so we can
mark it and the functions it calls as __init.
Link: http://lkml.kernel.org/r/51528E89.6080508@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
No functional change. The comment of function manage_workers()
RETURNS description is obvious wrong, same as the CONTEXT.
Fix it.
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No functional change. There are two worker pools for each cpu in
current implementation (one for normal work items and the other for
high priority ones).
tj: Whitespace adjustments.
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It's not allowed to clear masks of a cpuset if there're tasks in it,
but it's broken:
# mkdir /cgroup/sub
# echo 0 > /cgroup/sub/cpuset.cpus
# echo 0 > /cgroup/sub/cpuset.mems
# echo $$ > /cgroup/sub/tasks
# echo > /cgroup/sub/cpuset.cpus
(should fail)
This bug was introduced by commit 88fa523bff295f1d60244a54833480b02f775152
("cpuset: allow to move tasks to empty cpusets").
tj: Dropped temp bool variables and nestes the conditionals directly.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit drops an unneeded ACCESS_ONCE() and simplifies an "our work
is done" check in _rcu_barrier(). This applies feedback from Linus
(https://lkml.org/lkml/2013/7/26/777) that he gave to similar code
in an unrelated patch.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ paulmck: Fix comment to match code, reported by Lai Jiangshan. ]
Although rcutorture counts CPU-hotplug online failures, it does
not explicitly record which CPUs were having trouble coming online.
This commit therefore emits a console message when online failure occurs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The oldbatch variable in rcu_torture_writer() is stored to, but never
loaded from. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
There are getting to be too many module parameters to permit the current
semi-random order, so this patch orders them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, rcutorture has separate torture_types to test synchronous,
asynchronous, and expedited grace-period primitives. This has
two disadvantages: (1) Three times the number of runs to cover the
combinations and (2) Little testing of concurrent combinations of the
three options. This commit therefore adds a pair of module parameters
that control normal and expedited state, with the default being both
types, randomly selected, by the fakewriter processes, thus reducing
source-code size and increasing test coverage. In addtion, the writer
task switches between asynchronous-normal and expedited grace-period
primitives driven by the same pair of module parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds a object_debug option to rcutorture to allow the
debug-object-based checks for duplicate call_rcu() invocations to
be deterministically tested.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
[ paulmck: Banish mid-function ifdef, more or less per Josh Triplett. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ paulmck: Improve duplicate-callback test, per Lai Jiangshan. ]
When building the htmldocs (in verbose mode), scripts/kernel-doc reports the
following type of warnings:
Warning(kernel/workqueue.c:653): No description found for return value of
'get_work_pool'
Fix them by:
- Using "Return:" sections to introduce descriptions of return values
- Adding some missing descriptions
Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For some strings (e.g. version string), they are permitted to be larger
than PAGE_SIZE (although meaningless), so recommend to use scnprintf()
instead of sprintf().
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For some strings, they are permitted to be larger than PAGE_SIZE, so
need use scnprintf() instead of sprintf(), or it will cause issue.
One case is:
if a module version is crazy defined (length more than PAGE_SIZE),
'modinfo' command is still OK (print full contents),
but for "cat /sys/modules/'modname'/version", will cause issue in kernel.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The ops that uses param_set_bool_enable_only() as its set function can
easily handle being used without an argument. There's no reason to
fail the loading of the module if it does not have one.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the params.c code allows only two "set" functions to have
no arguments. If a parameter does not have an argument, then it
looks at the set function and tests if it is either param_set_bool()
or param_set_bint(). If it is not one of these functions, then it
fails the loading of the module.
But there may be module parameters that have different set functions
and still allow no arguments. But unless each of these cases adds
their function to the if statement, it wont be allowed to have no
arguments. This method gets rather messing and does not scale.
Instead, introduce a flags field to the kernel_param_ops, where if
the flag KERNEL_PARAM_FL_NOARG is set, the parameter will not fail
if it does not contain an argument. It will be expected that the
corresponding set function can handle a NULL pointer as "val".
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In param_get_byte(), to which the macro STANDARD_PARAM_DEF(byte, ...) expands,
"%c" is used to print an unsigned char. So it gets printed as a character what
is not intended here. Use "%hhu" instead.
[Rusty: note drivers which would be effected:
drivers/net/wireless/cw1200/main.c
drivers/ntb/ntb_transport.c:68
drivers/scsi/lpfc/lpfc_attr.c
drivers/usb/atm/speedtch.c
drivers/usb/gadget/g_ffs.c
]
Acked-by: Jon Mason <jon.mason@intel.com> (for ntb)
Acked-by: Michal Nazarewicz <mina86@mina86.com> (for g_ffs.c)
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull timer fixes from Ingo Molnar:
"Three small fixlets"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: fix compile warning in tick_nohz_init()
nohz: Do not warn about unstable tsc unless user uses nohz_full
sched_clock: Fix integer overflow
Fix new kernel-doc warnings in kernel/wait.c:
Warning(kernel/wait.c:374): No description found for parameter 'p'
Warning(kernel/wait.c:374): Excess function parameter 'word' description in 'wake_up_atomic_t'
Warning(kernel/wait.c:374): Excess function parameter 'bit' description in 'wake_up_atomic_t'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
81eeaf0411 ("cgroup: make cftype->[un]register_event() deal with
cgroup_subsys_state inst ead of cgroup") updated the cftype event
methods to take @css (cgroup_subsys_state) instead of @cgroup;
however, it incorrectly used @css passed to
cgroup_write_event_control(), which the dummy_css for the cgroup as
the file is a cgroup core file. This leads to oops on event
registration.
Fix it by using the css matching the event target file. Note that
cgroup_write_event_control() now disallows cgroup core files from
being event sources. This is for simplicity and doesn't matter as
cgroup_event will be moved and made specific to memcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
105347ba5 ("cgroup: make cgroup_file_open() rcu_read_lock() around
cgroup_css() and add cfent->css") added cfent->css to cache the
associted cgroup_subsys_state across file operations.
A cfent is associated with single css throughout its lifetime and the
origimal commit initialized the cache pointer during cgroup_add_file()
and verified that it matches the actual one in cgroup_file_open().
While this works fine for !root cgroups, it's broken for root cgroups
as files in a root cgroup are created before the css's are associated
with the cgroup and thus cgroup_css() call in cgroup_add_file()
returns NULL associating all cfents in the root cgroup with NULL css.
This makes cgroup_file_open() trigger WARN and fail with -ENODEV for
all !core subsystem files in the root cgroups.
There's no reason to initialize cfent->css separately from
cgroup_add_file(). As the association never changes,
cgroup_file_open() can set it unconditionally every time and
containing the logic in cgroup_file_open() makes more sense anyway as
the only reason it's necessary is file->private_data being already
occupied.
Fix it by setting cfent->css unconditionally from cgroup_file_open().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now we want cgroup core to always provide the css to use to the
subsystems, so change this API to css_from_id().
Uninline css_from_id(), because it's getting bigger and cgroup_css()
has been unexported.
While at it, remove the #ifdef, and shuffle the order of the args.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
