IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.
Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
differs from the original one for a few details, including the
ethernet PHY interface clock provider.
With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver
While before using the 1.5 version, ethernet failed to startup
do to un-clocked PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY
Similar fix has merged for i.Core MX6Q but missed to update for DL.
Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LAN8720 needs a reset of every clock enable. The reset needs
to be done at device level, due the flag PHY_RST_AFTER_CLK_EN.
So, add phy-handle by creating mdio child node inside fec.
This will eventually move the phy-reset-gpio which is defined
in fec node.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.
So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.
Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following warning is seen when building with W=1:
arch/arm/boot/dts/imx7s.dtsi:551.39-553.7: Warning (unique_unit_address): /soc/aips-bus@30000000/ocotp-ctrl@30350000/temp-grade@10: duplicate unit-address (also used in node /soc/aips-bus@30000000/ocotp-ctrl@30350000/speed-grade@10)
Since temp-grade and speed-grade point to the same node, replace them by
a single one to avoid the duplicate unit-address warning.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Without the onkey device it isn't possible to power off the system using
the X_PMIC_nONKEY signal which is routed to the SoM pin header.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The recovery mode pin is currently named 'REC_MODE_L', which is
how the signal is called in the schematics. The Chrome OS ABI
requires the pin to be named 'RECOVERY_SW_L', which is also how
it is called on all other veyron devices. Rename the pin to match
the ABI.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200108092908.1.I3afd3535b65460e79f3976e9ebfa392a0dd75e01@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable fimd device node which is a display controller, and add panel
node required by it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The clock setup on Meson8 cannot achieve a Mali frequency of exactly
182.15MHz. The vendor driver uses "FCLK_DIV7 / 1" for this frequency,
which translates to 2550MHz / 7 / 1 = 364285714Hz.
Update the GPU operating point to that specific frequency to not confuse
myself when comparing the frequency from the .dts with the actual clock
rate on the system.
Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The clock setup on Meson8 cannot achieve a Mali frequency of exactly
182.15MHz. The vendor driver uses "FCLK_DIV7 / 2" for this frequency,
which translates to 2550MHz / 7 / 2 = 182142857Hz.
Update the GPU operating point to that specific frequency to not confuse
myself when comparing the frequency from the .dts with the actual clock
rate on the system.
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Meson8b clock controller is an evolution of the Meson8 clock
controller. The clock controller on Meson8b contains two identical mali
clock trees for glitch-free rate switching.
Use the correct compatible string to make use of the glitch free mux.
Fixes: b6db3936f2833c ("ARM: dts: meson: switch the clock controller to the HHI register area")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Fixes for some badly applied patches that went in to 5.5. There is also
a fix for an incorrect i2c address.
-----BEGIN PGP SIGNATURE-----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=JQMa
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixes
ASPEED device tree fixes for 5.5
Fixes for some badly applied patches that went in to 5.5. There is also
a fix for an incorrect i2c address.
* tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
SolidRun Clearfog Pro rev 2.1 and Clearfog Base rev 1.3 added EEPROM.
Add DT node for EEPROM description in the .dtsi shared by Clearfog Pro
and Base.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Move the i2c0 controller properties to the SOM .dtsi. This is
preparation for adding an i2c device at the SOM level.
Cc: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
SolidRun Clearfog GTR L8 and S4 SBCs are based on Armada 385. They
features 8 (L8) or 4 (S4) switched Ethernet ports, 1 1Gb Ethernet port,
1 directly connected SFP port, 1 SFP port behind the switch (not
currently described in DT), 3 mini-PCIe slots, eMMC, SPI flash, USB3
port.
https://developer.solid-run.com/products/clearfog-gtr-a385/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The PCA9552 used for fan fault and presence information is at address
61h, not 60h.
Fixes: 2efc118ce3c3 ("ARM: dts: aspeed: rainier: Add i2c devices")
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a revert of "ARM: dts: aspeed: rainier: Add i2c devices", which
was already applied to the tree.
Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices")
Reviewed-by: Jim Wright <wrightj@linux.vnet.ibm.com>
Tested-by: Jim Wright <wrightj@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a revert of "ARM: dts: aspeed: tacoma: Enable FMC and SPI
devices" which was already applied as part of "ARM: dts: aspeed: Add
Tacoma machine".
Fixes: 8737481e381c ("ARM: dts: aspeed: tacoma: Enable FMC and SPI devices")
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a revert of "ARM: dts: aspeed: tacoma: Enable I2C busses", which
was already applied as part of "ARM: dts: aspeed: Add Tacoma machine".
Fixes: 606bcdde6724 ("ARM: dts: aspeed: tacoma: Enable I2C busses")
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The FIS nodes were placed incorrectly in the device tree.
Fixes: 0fe4e304782c ("ARM: dts: aspeed-g6: Describe FSI masters")
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The flash write protect pin is currently named 'FW_WP_AP', which is
how the signal is called in the schematics. The Chrome OS ABI
requires the pin to be named 'AP_FLASH_WP_L', which is also how
it is called on all other veyron devices. Rename the pin to match
the ABI.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200106135142.1.I3f99ac8399a564c88ff48ae6290cc691b47c16ae@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.
"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names. Therefore they should be written with lowercase letters starting
with capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
We can now probe devices with ti-sysc interconnect driver and dts
data, and can continue dropping the related platform data and custom
ti,hwmods dts property for various devices.
And related to that, we finally can remove the legacy sdma support in
favor of using the dmaengine driver only. I was planning to send the
sdma changes separately, but that would have produced a pile of
pointless merge conflicts, so I decided it's best to resolve it locally.
After all, the sdma series also ends up removing the related platform
data.
Note that this series is based on omap-for-v5.6/ti-sysc-dt-signed branch
as it depends for dts data being in place.
-----BEGIN PGP SIGNATURE-----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=DAqN
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Drop more legacy platform data for omaps for v5.6 merge window
We can now probe devices with ti-sysc interconnect driver and dts
data, and can continue dropping the related platform data and custom
ti,hwmods dts property for various devices.
And related to that, we finally can remove the legacy sdma support in
favor of using the dmaengine driver only. I was planning to send the
sdma changes separately, but that would have produced a pile of
pointless merge conflicts, so I decided it's best to resolve it locally.
After all, the sdma series also ends up removing the related platform
data.
Note that this series is based on omap-for-v5.6/ti-sysc-dt-signed branch
as it depends for dts data being in place.
* tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits)
ARM: OMAP2+: Drop legacy platform data for sdma
ARM: OMAP2+: Drop legacy init for sdma
dmaengine: ti: omap-dma: Use cpu notifier to block idle for omap2
dmaengine: ti: omap-dma: Allocate channels directly
dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it
dmaengine: ti: omap-dma: Configure global priority register directly
ARM: OMAP5: hwmod-data: remove OMAP5 IOMMU hwmod data
ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data
ARM: OMAP2+: Drop legacy platform data for omap4 fdif
ARM: OMAP2+: Drop legacy platform data for omap4 slimbus
ARM: OMAP2+: Drop legacy platform data for omap5 kbd
ARM: OMAP2+: Drop legacy platform data for omap4 kbd
ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex
ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex
ARM: OMAP2+: Drop legacy platform data for omap4 hsi
ARM: OMAP2+: Drop legacy platform data for am4 vpfe
ARM: OMAP2+: Drop legacy platform data for dra7 ocp2scp
ARM: OMAP2+: Drop legacy platform data for omap5 ocp2scp
ARM: OMAP2+: Drop legacy platform data for omap4 ocp2scp
ARM: OMAP2+: Drop legacy platform data for am4 ocp2scp
...
Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-4
Signed-off-by: Olof Johansson <olof@lixom.net>
Devicetree changes for omaps for v5.6 to configure more
devices and update boards to use generic lcd panels:
- Configure HDMI for dra76-evm and am57xx-idk
- Correct node name for am3517 mdio
- Convert am335x-evm, am335x-evmsk, and am335x-icev2 to use generic
panels
-----BEGIN PGP SIGNATURE-----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=Aprz
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.6/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.6 merge window
Devicetree changes for omaps for v5.6 to configure more
devices and update boards to use generic lcd panels:
- Configure HDMI for dra76-evm and am57xx-idk
- Correct node name for am3517 mdio
- Convert am335x-evm, am335x-evmsk, and am335x-icev2 to use generic
panels
* tag 'omap-for-v5.6/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0
ARM: dts: am335x-evmsk: Use drm simple-panel instead of tilcdc-panel
ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel
ARM: dts: omap3: name mdio node properly
ARM: dts: am57xx-idk-common: add HDMI to the common dtsi
ARM: dts: dra76-evm: add HDMI output
Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
Here are few fixes for v5.5-rc cycle:
- Two corner case fixes related to ti-sysc driver clock issues
- Fixes for am57xx dts for pcie gpios
- Beagle-x15 regulator dts fix
- Fix for wkup_m3_ipc driver race
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl4UvwkRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPvjRAAquZEO7h7pat9W0kyGxxI9qkhbDTLtWbA
JRDXYUDsbji1Bz64Ea9rVYSOZlQi+dtOh3WXwQ5PNhEW5tCGV3WttScC5T2IyQBN
+Ab3a6Cr9eRN9wchsYifKntOnBKQDA62Eb1FsWXf/QYrAyI4SJpaNzJSh35xASAR
Z8hErABqSws/cIQ6x3hneArzwrvA1G8FMHryGFbPxvzbwxgEsW9J8nITG3S/itwM
WMPvBCx5YM1vI6weuXRsm1k0vPuHt1UYkg9J3AsINKpScbbwf3nz6r+vVMG0Zs93
9xlbsW68COObBvujTLrCb7/B6Mbqw/1vcWVf86vJr3xLzbVpRU+doDZAlV3FqMoP
srrcVPpR+s8HIICxCiFF4aWPOrwkkKTkZN0jIPGOTrObNVqIj3Im7gHoRuhD2bAj
/5X8h5or9Mpv+4zegNFxnfR/f9qf3f1Li3rsURTI75CNJnsNAqaNKTwikA+8SsIJ
EOGaTe5vFc5k4k9TmHT/OeJCTbuIHXs3E0OjnUBmQ9degOVxo8nNBbQKXioAmWy+
uFSQwJ4fVx54PIKlwJ0agnprOfkuM1IFbT+HxwZO1WAt6zUD4Vg1Z1Dv7si+XX02
joCzgy85nq1W9ljqew7mVu2sAQpzZB0dML4iuuPZ7IXHor9mXwQXD7Tfjg87rVn8
hYm/ZKHjGQQ=
=kjYS
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.5-rc cycle
Here are few fixes for v5.5-rc cycle:
- Two corner case fixes related to ti-sysc driver clock issues
- Fixes for am57xx dts for pcie gpios
- Beagle-x15 regulator dts fix
- Fix for wkup_m3_ipc driver race
* tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot
ARM: dts: beagle-x15-common: Model 5V0 regulator
ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number
ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
bus: ti-sysc: Fix iterating over clocks
ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap
Link: https://lore.kernel.org/r/pull-1578418121-413328@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables hardware random number generator support for the BCM2711
on the Raspberry Pi 4 board.
Signed-off-by: Stephen Brennan <stephen@brennan.io>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
[nsaenzjulienne@suse.de: remove unnecessary status="okay"]
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
BCM2711 inherits from BCM283X, but has an incompatible HWRNG. Move this
node to bcm2835-common.dtsi, so that BCM2711 can define its own.
Signed-off-by: Stephen Brennan <stephen@brennan.io>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
A few clocks from the CCU were exported later, and references to them in
the device tree were using raw numbers.
Now that the DT binding header changes are in as well, switch to the
macros for more clarity.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The Allwinner R40 SoC contains four SPI controllers, using the newer
sun6i design (but at the legacy addresses).
The controller seems to be fully compatible to the A64 one, so no driver
changes are necessary.
The first three controllers can be used on two sets of pins, but SPI3 is
only routed to one set on Port A.
Only the pin groups for SPI0 on PortC and SPI1 on PortI are added here,
because those seem to be the only one exposed on the Bananapi boards.
Tested by connecting a SPI flash to a Bananapi M2 Berry SPI0 and SPI1
header pins.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There's a SMSC USB2640 (USB hub & SD controller) connected to it, but
the SD card slot footprint is unpopulated. Also connected to the hub is
a SMSC LAN7500 gigabit ethernet adapter.
Link: https://lore.kernel.org/r/20191220065314.237624-6-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
There are two on MMP3, along with the PHYs. The PHYs are made compatible
with the NOP transceiver, since there's no driver for the time being and
they're likely configured by the firmware.
Link: https://lore.kernel.org/r/20191220065314.237624-5-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Touch screen support for the iwg20d board,
- ARM global timer support on Cortex-A9 MPCore SoCs,
- Miscellaneous fixes for issues detected by "make dtbs_check".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXhMEjgAKCRCKwlD9ZEnx
cBi2AP9TSGAgkm94K9MGLInjz1jX7gJuaXBThOSsZK6cbLTanAEAoLG/Fbe/vkya
DiOgp89ukA7libFJEPIvPK0Nn8PJFgQ=
=clXj
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.6
- Touch screen support for the iwg20d board,
- ARM global timer support on Cortex-A9 MPCore SoCs,
- Miscellaneous fixes for issues detected by "make dtbs_check".
* tag 'renesas-arm-dt-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: sh73a0: Add missing clock-frequency for fixed clocks
ARM: dts: r8a7778: Add missing clock-frequency for fixed clocks
ARM: dts: rcar-gen2: Add missing mmio-sram bus properties
ARM: dts: rcar-gen2: Fix PCI high address in interrupt-map-mask
ARM: dts: renesas: Group tuples in pci ranges and dma-ranges properties
ARM: dts: renesas: Group tuples in interrupt properties
ARM: dts: renesas: Group tuples in regulator-gpio states properties
ARM: dts: r8a7779: Add device node for ARM global timer
ARM: dts: sh73a0: Add device node for ARM global timer
ARM: dts: sh73a0: Rename twd clock to periph clock
ARM: dts: iwg20d-q7-common: Add LCD support
Link: https://lore.kernel.org/r/20200106104857.8361-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- Proper include file for the AB8505 PMIC variant.
- Add a DTS file for the GT-I8190/Golden
- Extend the IMU, touch screen, WiFi and Bluetooth
as separate patches.
-----BEGIN PGP SIGNATURE-----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=h5MX
-----END PGP SIGNATURE-----
Merge tag 'ux500-armsoc-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt
Support the Samsung GT-I8190/Golden phone:
- Proper include file for the AB8505 PMIC variant.
- Add a DTS file for the GT-I8190/Golden
- Extend the IMU, touch screen, WiFi and Bluetooth
as separate patches.
* tag 'ux500-armsoc-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500: samsung-golden: Add Bluetooth
ARM: dts: ux500: samsung-golden: Add WiFi
ARM: dts: ux500: samsung-golden: Add touch screen
ARM: dts: ux500: samsung-golden: Add IMU (accelerometer + gyroscope)
ARM: dts: ux500: Add device tree for Samsung Galaxy S III mini (GT-I8190)
dt-bindings: arm: ux500: Document samsung,golden compatible
ARM: dts: ux500: Add device tree include for AB8505
ARM: dts: ux500: Remove unused ste-href-ab8505.dtsi
Link: https://lore.kernel.org/r/CACRpkdaN2Lv_rBEYNiyAarA81yea6Eky8w_htqZqdRng8S-DcA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The register blocks don't occupy 4K. In fact, some blocks are packed
close to others and assuming they're 4K causes overlaps:
pxa2xx-i2c d4033800.i2c: can't request region for resource
[mem 0xd4033800-0xd40347ff]
Link: https://lore.kernel.org/r/20191220071443.247183-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
The CSI0 and CSI1 blocks are the same as found on the A20. However only
CSI0 is supported upstream right now.
Add a device node for CSI0 using the A20 compatible as a fallback, and
the standard pinctrl options. Also add the MBUS interconnect.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The CSI controller driver now supports the second CSI controller, CSI1.
Add a device node for it. Pinmuxing options for the MCLK output, the
standard 8-bit interface, and a secondary 24-bit interface are included.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The CSI controller driver now supports the second CSI controller, CSI1.
Add a device node for it. Pinmuxing options for the MCLK output, the
standard 8-bit interface, and a secondary 24-bit interface are included.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Some old SoCs, while supporting LVDS, don't list the LVDS clocks and reset
lines. Let's add them when relevant.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
tcon_tv0, tcon_tv1 nodes have a clock names of tcon-ch0,
tcon-ch1 which are referring tcon_top clocks via index
numbers like 0, 1 with CLK_TCON_TV0 and CLK_TCON_TV1
respectively.
Use the macro in place of index numbers, for more code
readability.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The ARM Cortex-A7 cores used in the Allwinner R40 SoC have their usual
Performance Monitoring Unit (PMU), which allows perf to use hardware
events.
The SoC integrator just needs to connect each per-core interrupt line
to the GIC. The R40 manual does not really mention those IRQ lines, but
experimentation in U-Boot shows that interrupts 152-155 are connected to
the four cores (similar to the A20).
Tested on a Bananapi M2 Berry, with perf and taskset to confirm the
association between cores and interrupts.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The GIC used in the R40 SoC is an ARM GIC-400 with virtualization support,
so let's advertise the full 8K region of the GICC MMIO frame to enable
KVM's usage of the GIC (as we do already for all other SoCs).
Tested by running KVM on a Bananapi M2 Berry.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
"clock-frequency" is a required property for devices nodes compatible
with "fixed-clock", leading to warnings when running
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/clock/fixed-clock.yaml
arch/arm/boot/dts/sh73a0-kzm9g.dt.yaml: extcki: 'clock-frequency' is a required property
Fix this by adding the missing "clock-frequency" properties to the various
clocks, to be overridden by the board DTS files when populated.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213162736.2160-1-geert+renesas@glider.be
