IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.
Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Add missing header file into dsi_host.c and encode data-lanes string
directly into the warning message in the driver to avoid build issues
detected by lkp.
Fixes: 185443efa26a ("drm/msm: Convert to drm_of_get_data_lanes_count")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-10-marex@denx.de
msm:
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
amdgpu:
- Update fdinfo to the common drm format
- uapi: Add VM_NOALLOC GPUVM attribute to prevent buffers for going into the MALL
Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that can be discarded on eviction
Mesa code which uses these: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466
- Link training fixes
- DPIA fixes
- Misc code cleanups
- Aux fixes
- Hotplug fixes
- More FP clean up
- Misc GFX9/10 fixes
- Fix a possible memory leak in SMU shutdown
- SMU 13 updates
- RAS fixes
- TMZ fixes
- GC 11 updates
- SMU 11 metrics fixes
- Fix coverage blend mode for overlay plane
- Note DDR vs LPDDR memory
- Fuzz fix for CS IOCTL
- Add new PCI DID
amdkfd:
- Clean up hive setup
- Misc fixes
tegra:
- add some prelim 5.20 work to avoid inter-tree mess
-----BEGIN PGP SIGNATURE-----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=IC8q
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"This is mostly regular fixes, msm and amdgpu. There is a tegra patch
that is bit of prep work for a 5.20 feature to avoid some inter-tree
syncs, and a couple of late addition amdgpu uAPI changes but best to
get those in early, and the userspace pieces are ready.
msm:
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked
access in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
amdgpu:
- Update fdinfo to the common drm format
- uapi:
- Add VM_NOALLOC GPUVM attribute to prevent buffers for going
into the MALL
- Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that
can be discarded on eviction
- Mesa code which uses these:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466
- Link training fixes
- DPIA fixes
- Misc code cleanups
- Aux fixes
- Hotplug fixes
- More FP clean up
- Misc GFX9/10 fixes
- Fix a possible memory leak in SMU shutdown
- SMU 13 updates
- RAS fixes
- TMZ fixes
- GC 11 updates
- SMU 11 metrics fixes
- Fix coverage blend mode for overlay plane
- Note DDR vs LPDDR memory
- Fuzz fix for CS IOCTL
- Add new PCI DID
amdkfd:
- Clean up hive setup
- Misc fixes
tegra:
- add some prelim 5.20 work to avoid inter-tree mess"
* tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits)
drm/msm/dpu: Move min BW request and full BW disable back to mdss
drm/msm/dpu: Fix pointer dereferenced before checking
drm/msm/dpu: Remove unused code
drm/msm/disp/dpu1: remove superfluous init
drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()
gpu: host1x: Add context bus
drm/amdgpu: add drm-client-id to fdinfo v2
drm/amdgpu: Convert to common fdinfo format v5
drm/amdgpu: bump minor version number
drm/amdgpu: add AMDGPU_VM_NOALLOC v2
drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE
drm/amdgpu: add beige goby PCI ID
drm/amd/pm: Return auto perf level, if unsupported
drm/amdkfd: fix typo in comment
drm/amdgpu/gfx: fix typos in comments
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
drm/amdgpu: differentiate between LP and non-LP DDR memory
drm/amdgpu: Resolve pcie_bif RAS recovery bug
drm/amdgpu: clean up asd on the ta_firmware_header_v2_0
drm/amdgpu/discovery: validate VCN and SDMA instances
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJil/W4AAoJEJMTUIYYBUIppm4H/1lqhAzQhbMSM8TDA5LUI2+2
e09mvq7KsZo30uHazCRwnci8AahDWFenfQ78LVOosQHGSXtSYpsgVs0czMWXvRlE
fPNlo75eAwPENNzux2Uo1K3uT32N0oeia0yYJqTzYuZg0Lmkx2cDPd4alUokXqaK
8J+6xJsY2d3YM0xl5gIFmM9gifd+jGFYrVsiEY8Dwr59zkdmoMD9/QIi5ZsWXH7G
LCJA6NUqr31TLrGA7hV/GAME9IFjxNWNotYLjxsoAUn5FPhwHY7EeJsloLJEl4HP
UCDJ47SfLfvYjUHeBXvUDbzTD2FPpWuDhharEqyLtStcVQjnpJCOZOO2e52qqMo=
=PgRN
-----END PGP SIGNATURE-----
Merge tag 'msm-next-5.19-fixes-06-01' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next
5.19 fixes for msm-next
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to address
bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring interrupt
mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/927b201e-a734-a29d-b9fb-b9889e1f7795@quicinc.com
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale
bandwidth") we fully moved interconnect stuff to the DPU driver. This
had no change for sc7180 but _did_ have an impact for other SoCs. It
made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken.
Specifically the interconnect needs to be on for more than just the
DPU driver's AXI bus. In the very least it also needs to be on for the
DSI driver's AXI bus. This can be seen fairly easily by doing this on
a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10
sleep 10
cd /sys/bus/platform/devices/ae94000.dsi/power
echo on > control
When you do that, you'll get a warning splat in the logs about
"gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and
that it can't happen naturally in the system because in normal system
usage the DPU is pretty much always on when DSI is on. That being
said:
* In official ChromeOS builds (admittedly a 5.4 kernel with backports)
we have seen that splat at bootup.
* Even though we don't use "autosuspend" for these components, we
don't use the "put_sync" variants. Thus plausibly the DSI could stay
"runtime enabled" past when the DPU is enabled. Techncially we
shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the
interconnect happens in the mdss driver again. That means that all of
the children can assume that the interconnect is on at the minimum
bandwidth. We'll then let the DPU request the higher amount that it
wants.
It should be noted that this isn't as hacky of a solution as it might
initially appear. Specifically:
* Since MDSS and DPU individually get their own references to the
interconnect then the framework will actually handle aggregating
them. The two drivers are _not_ clobbering each other.
* When the Qualcomm interconnect driver aggregates it takes the max of
all the peaks. Thus having MDSS request a peak, as we're doing here,
won't actually change the total interconnect bandwidth (it won't be
added to the request for the DPU). This perhaps explains why the
"average" requested in MDSS was historically 0 since that one
_would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're
also seeing some RPMH hangs that are addressed by this fix. These
hangs are showing up in the field and on _some_ devices with enough
stress testing of suspend/resume. Specifically right at suspend time
with a stack crawl that looks like this (from chromeos-5.15 tree):
rpmh_write_batch+0x19c/0x240
qcom_icc_bcm_voter_commit+0x210/0x420
qcom_icc_set+0x28/0x38
apply_constraints+0x70/0xa4
icc_set_bw+0x150/0x24c
dpu_runtime_resume+0x50/0x1c4
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x12c/0x20c
__rpm_callback+0x98/0x138
rpm_callback+0x30/0x88
rpm_resume+0x370/0x4a0
__pm_runtime_resume+0x80/0xb0
dpu_kms_enable_commit+0x24/0x30
msm_atomic_commit_tail+0x12c/0x630
commit_tail+0xac/0x150
drm_atomic_helper_commit+0x114/0x11c
drm_atomic_commit+0x68/0x78
drm_atomic_helper_disable_all+0x158/0x1c8
drm_atomic_helper_suspend+0xc0/0x1c0
drm_mode_config_helper_suspend+0x2c/0x60
msm_pm_prepare+0x2c/0x40
pm_generic_prepare+0x30/0x44
genpd_prepare+0x80/0xd0
device_prepare+0x78/0x17c
dpm_prepare+0xb0/0x384
dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the
hang seemed to come and go with random factors. It's not terribly
surprising that the hang is gone after this patch since the line of
code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth")
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/487884/
Link: https://lore.kernel.org/r/20220531160059.v2.1.Ie7f6d4bf8cce28131da31a43354727e417cae98d@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The phys_enc->wb_idx is dereferencing before null checking, so move
it after checking.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487606/
Link: https://lore.kernel.org/r/1653877196-23114-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Commit 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in
encoder") added dsc_common_mode variable which was set to zero but then
again programmed, so drop the superfluous init.
Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/487208/
Link: https://lore.kernel.org/r/20220525073912.2706505-1-vkoul@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller.
At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp
controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd
related interrupt mask bits to disable hpd related interrupts due to it
mistakenly think hpd related interrupt mask bits will be cleared by software
reset of dp controller automatically. This mistake may cause system to crash
during suspending procedure due to unexpected irq fired and trigger event
thread to access dp controller registers with controller clocks are disabled.
This patch fixes system crash during suspending problem by removing "enable"
flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related
interrupt mask bits are cleared to prevent unexpected from happening.
Changes in v2:
-- add more details commit text
Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended
Changes in v4:
-- correct Fixes's commit ID
-- remove synchrons_irq()
Changes in v5:
-- revise commit text
Changes in v6:
-- add event_lock to protect "suspended"
Changes in v7:
-- delete "suspended" flag
Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486591/
Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJihZ6hAAoJEJMTUIYYBUIphx8IAJZ+8FJ+qjCne0GaVFGczjFr
cz1PVE7CAXWlgA+1V/xSw7Awt0oPhrB400SRh/2bea8awHkKZxtcnBIA1apEoDjo
+qyhHMpwcItCHQM5xOKKGZb0KU+MCK9/6PH5VjD8k1gX52OoxQ4e0uUng7ljVgCe
F/LBBpW6oY6ZAiZxaxieXSD36bNkwhYXdYGWdJFQPQF+N4gYPmSWOmijaRnkJtnv
o4VS5HnTN3FMgKu+h2Rr7r4A5s7WygVJM7K+sbJZI/F+OCFv3lftkU2JOXGtS2oc
5sInJB972aafkD3lOzTPyARiHrtvLpsSGPXok24b3suRN0pHRYtvAOdrI0m/sUg=
=y6Lb
-----END PGP SIGNATURE-----
Merge tag 'msm-next-5.19-fixes' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next
5.19 fixes for msm-next
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com
If there are errors while trying to enable the pm in the
bind path, it will lead to unclocked access of hw revision
register thereby crashing the device.
This will not address why the pm_runtime_get_sync() fails
but at the very least we should be able to prevent the
crash by handling the error and bailing out earlier.
changes in v2:
- use pm_runtime_resume_and_get() instead of
pm_runtime_get_sync()
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486721/
Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
DRM_MODE_ROTATE_180 was previously marked as supported even
for devices not supporting inline rotation.
This is true because the SSPPs can always flip the image.
After inline rotation support changes, this bit was removed
and kms_rotation_crc IGT test starts skipping now whereas
it was previously passing.
Restore DRM_MODE_ROTATE_180 bit to the supported rotations
list.
Fixes: dabfdd89eaa92 ("add inline rotation support for sc7280")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/485928/
Link: https://lore.kernel.org/r/20220511222710.22394-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Writeback modes were being added according to mode_config.max_width
but this is assigned to double of max_mixer_width.
For compositors/clients using a single SSPP, this will fail
the dpu_plane's atomic check as it checks for max_linewidth.
Limit writeback modes according to max_linewidth to allow
even compositors/clients which use only a single SSPP to
use writeback.
Fixes: 77b001acdcfeb ("drm/msm/dpu: add the writeback connector layer")
Reported-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/486176/
Link: https://lore.kernel.org/r/20220513225959.19004-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm_gem_object_lookup will call drm_gem_object_get inside. So cursor_bo
needs to be put when msm_gem_get_and_pin_iova fails.
Fixes: e172d10a9c4a ("drm/msm/mdp5: Add hardware cursor support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220509061125.18585-1-hbh25y@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The offset got dropped by accident.
Fixes: d413e6f97134 ("drm/msm: Drop msm_gem_iova()")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Link: https://lore.kernel.org/r/20220510165216.3577068-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
a6xx_gmu_init() passes the node to of_find_device_by_node()
and of_dma_configure(), of_find_device_by_node() will takes its
reference, of_dma_configure() doesn't need the node after usage.
Add missing of_node_put() to avoid refcount leak.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220512121955.56937-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
time") caused sc7180 Chromebooks that use the parade-ps8640 bridge
chip to fail to turn the display back on after it turns off.
Unfortunately, it doesn't look easy to fix the parade-ps8640 driver to
handle the new power sequence. The Linux driver has almost nothing in
it and most of the logic for this bridge chip is in black-box firmware
that the bridge chip uses.
Also unfortunately, reverting the patch will break "tc358762".
The long term solution here is probably Dave Stevenson's series [1]
that would give more flexibility. However, that is likely not a quick
fix.
For the short term, we'll look at the compatible of the next bridge in
the chain and go back to the old way for the Parade PS8640 bridge
chip. If it's found that other bridge chips also need this workaround
then we can add them to the list or consider inverting the
condition. However, the hope is that the framework will not take too
much longer to land and we won't have to add anything other than
ps8640 here.
[1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com
Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time")
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220513131504.v5.1.Ia196e35ad985059e77b038a41662faae9e26f411@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- Devfreq clamp_to_idle fix
- DPU: DSC (Display Stream Compression) support
- DPU: inline rotation support on SC7280
- DPU: update DP timings to follow vendor recommendations
- DP, DPU: add support for wide bus (on newer chipsets)
- DP: eDP support
- Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master
component
- MDSS: optionally reset the IP block at the bootup to drop
bootloader state
- Properly register and unregister internal bridges in the DRM framework
- Complete DPU IRQ cleanup
- DP: conversion to use drm_bridge and drm_bridge_connector
- eDP: drop old eDP parts again
- DPU: writeback support
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
There is no need to check that kfree() argument is not NULL. Remove
extra check and call kfree() unconditionally.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220507114009.1696278-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Running the GPU without an IOMMU is not really a supported (or sane)
configuration. Yet it can be useful during SoC bringup (ie. if the
iommu driver doesn't work yet).
Lets limit it to users who already have /dev/mem access, to avoid the
chance that a user accidentially configures kernel without IOMMU
support.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220502172908.3569799-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
When rebooting on my sc7280-herobrine based device, I got a
crash. Upon debugging, I found that I was in msm_drv_shutdown() and my
"pdev" was the one associated with mdss_probe().
From source, I found that mdss_probe() has the line:
platform_set_drvdata(pdev, mdss);
...where "mdss" is of type "struct msm_mdss *".
Also from source, I saw that in msm_drv_shutdown() we have the line:
struct msm_drm_private *priv = platform_get_drvdata(pdev);
This is a mismatch and is the root of the problem.
Further digging made it apparent that msm_drv_shutdown() is only
supposed to be used for parts of the msm display framework that also
call msm_drv_probe() but mdss_probe() doesn't call
msm_drv_probe(). Let's remove the shutdown functon from msm_mdss.c.
Digging a little further, code inspection found that two drivers that
use msm_drv_probe() weren't calling msm_drv_shutdown(). Let's add it
to them.
Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/484975/
Link: https://lore.kernel.org/r/20220504163900.v2.1.Iaebd35e60160fc0f2a50fac3a0bf3b298c0637c8@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The msm_gem_prime_get_sg_table() needs to return error pointers on
error. This is called from drm_gem_map_dma_buf() and returning a
NULL will lead to a crash in that function.
Fixes: ac45146733b0 ("drm/msm: fix msm_gem_prime_get_sg_table()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485023/
Link: https://lore.kernel.org/r/YnOmtS5tfENywR9m@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is a possibility for mdp5_get_global_state to return
-EDEADLK when acquiring the modeset lock, but currently global_state in
mdp5_mixer_release doesn't check for if an error is returned.
To avoid a NULL dereference error, let's have mdp5_mixer_release
check if an error is returned and propagate that error.
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 7907a0d77cb4 ("drm/msm/mdp5: Use the new private_obj state")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485181/
Link: https://lore.kernel.org/r/20220505214051.155-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring
the modeset lock, but currently mdp5_pipe_release doesn't check for if
an error is returned. Because of this, there is a possibility of
mdp5_pipe_release hitting a NULL dereference error.
To avoid this, let's have mdp5_pipe_release check if
mdp5_get_global_state returns an error and propogate that error.
Changes since v1:
- Separated declaration and initialization of *new_state to avoid
compiler warning
- Fixed some spelling mistakes in commit message
Changes since v2:
- Return 0 in case where hwpipe is NULL as this is considered normal
behavior
- Added 2nd patch in series to fix a similar NULL dereference issue in
mdp5_mixer_release
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 7907a0d77cb4 ("drm/msm/mdp5: Use the new private_obj state")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485179/
Link: https://lore.kernel.org/r/20220505214051.155-1-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Event thread supposed to exit from its while loop after kthread_stop().
However there may has possibility that event thread is pending in the
middle of wait_event due to condition checking never become true.
To make sure event thread exit its loop after kthread_stop(), this
patch OR kthread_should_stop() into wait_event's condition checking
so that event thread will exit its loop after kernal_stop().
Changes in v2:
-- correct spelling error at commit title
Changes in v3:
-- remove unnecessary parenthesis
-- while(1) to replace while (!kthread_should_stop())
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/484576/
Link: https://lore.kernel.org/r/1651595136-24312-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Correct a typo in the address of the second DSI PHY in the SDM660 device
config.
Fixes: 694dd304cc29 ("drm/msm/dsi: Add phy configuration for SDM630/636/660")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/484697/
Link: https://lore.kernel.org/r/20220503204340.935532-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Due to MSM8998 support having been stuck in review for so long,
another struct was added nearby, which confused git and resulted
in the definitions not being sorted alphabetically. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484296/
Link: https://lore.kernel.org/r/20220430161529.605843-3-konrad.dybcio@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move the initializer for the mode variable to the declaration point to
remove unitialized variable access from the DEBUG_DPU macro. This fixes
the following warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:250:37: note: initialize the variable 'mode' to silence this warning
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/484346/
Link: https://lore.kernel.org/r/20220502082420.48409-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Backmerge tag 'v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Check if 'aspace' is set before using it as it will stay null without
IOMMU, such as on msm8974.
Fixes: bc2112583a0b ("drm/msm/gpu: Track global faults per address-space")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20220421203455.313523-1-luca@z3ntu.xyz
Signed-off-by: Rob Clark <robdclark@chromium.org>
The msm driver has dropped support for older eDP block. However the
merge conflict in the commit 4ce2ca4b374a ("drm/msm: Fix include
statements for DisplayPort") was resolved incorrectly and two files were
left in place. Drop them now (again).
Fixes: 4ce2ca4b374a ("drm/msm: Fix include statements for DisplayPort")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/484307/
Link: https://lore.kernel.org/r/20220430175747.3818137-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add explicit include of drm_bridge.h to the msm_drv.c to fix the
following warning:
drivers/gpu/drm/msm/msm_drv.c:236:17: error: implicit declaration of function 'drm_bridge_remove'; did you mean 'drm_bridge_detach'? [-Werror=implicit-function-declaration]
Fixes: d28ea556267c ("drm/msm: properly add and remove internal bridges")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484310/
Link: https://lore.kernel.org/r/20220430180917.3819294-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The downstream uses read-modify-write for updating command mode
compression registers. Let's follow this approach. This also fixes the
following warning:
drivers/gpu/drm/msm/dsi/dsi_host.c:918:23: warning: variable 'reg_ctrl' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/484305/
Link: https://lore.kernel.org/r/20220430175533.3817792-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
While there's a comment pointing from dpu_intr_set to dpu_hw_intr_reg
and vice-versa, an array initializer using indices makes it so that the
indices between the enum and array cannot possibly get out of sync even
if they're accidentially ordered wrongly. It is still useful to keep
the comment to be made aware where the register offset mapping resides
while looking at dpu_hw_intr_reg.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/476358/
Link: https://lore.kernel.org/r/20220226194633.204501-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, dpu_hw_lm_collect_misr returns EINVAL if CRC is disabled.
This causes a lot of spam in the DRM debug logs as it's called for every
vblank.
Instead of returning EINVAL when CRC is disabled in
dpu_hw_lm_collect_misr, let's return ENODATA and add an extra ENODATA check
before the debug log in dpu_crtc_get_crc.
Changes since V1:
- Added reported-by and suggested-by tags
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB5 (qrb5165)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484274/
Link: https://lore.kernel.org/r/20220430005210.339-1-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Set mdp clock to max clock rate during probe/bind sequence from the
opp table so that rails are not at undetermined state. Since we do not
know what will be the rate set in boot loader, it would be ideal to
vote at max frequency. There could be a firmware display programmed
in bootloader and we want to transition it to kernel without underflowing.
The clock will be scaled down later when framework sends an update.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/479090/
Link: https://lore.kernel.org/r/1647919631-14447-2-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove the unused local variable refcount for encoder_phys_wb
as the one part of wb_enc is used directly.
changes in v2:
- remove usage of ret variable also
- remove the if (ret) code as it was dead-code anyway
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483919/
Link: https://lore.kernel.org/r/1651169759-29760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
