IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The DW PCIe Root Port IP core is synthesized with the 64-bit AXI address
bus. Since the device is also equipped with the eDMA engine, explicitly
set the device DMA mask so DMA engine clients can allocate data buffers
anywhere in the 64-bit memory space.
Link: https://lore.kernel.org/r/20230113171409.30470-27-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The MSI target address must be in the lowest 4GB memory to support PCI
peripherals without 64-bit MSI support. Since the allocation is done from
DMA coherent memory, set only the coherent DMA mask, leaving the streaming
DMA mask alone.
Thus streaming DMA operations will work with no artificial limitations. It
will be specifically useful for the eDMA-capable controllers so the
corresponding DMA engine clients would map the DMA buffers with no need for
SWIOTLB for buffers allocated above 4GB.
Add a brief comment about the reason allocating the MSI target address
below 4GB.
Link: https://lore.kernel.org/r/20230113171409.30470-26-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
When CONFIG_DW_EDMA=m, dw_edma_probe() is built as a module. Previously
edma.h declared it as extern, but the implementation isn't available for
builtin callers. A subsequent commit will add calls from
dw_pcie_host_init() and dw_pcie_ep_init(), which can only be built-in.
Make it safe for such builtin callers to call dw_edma_probe() by using
IS_REACHABLE() to define a stub when CONFIG_DW_EDMA=m.
When CONFIG_DW_EDMA=m, these builtin callers will fail to detect and
register eDMA devices, so eDMA won't be usable even if the dw-edma module
is loaded.
[bhelgaas: split to separate patch, commit log]
Link: https://lore.kernel.org/r/20230113171409.30470-25-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Kconfig "select" is discouraged for visible symbols like DW_EDMA because it
makes it possible to set DW_EDMA even if DW_EDMA depends on things that are
not set (see Documentation/kbuild/kconfig-language.txt).
Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it.
There will likely be several future drivers that depend on DW_EDMA, so this
uses "if DW_EDMA" to enclose them all rather than repeating "depends on
DW_EDMA" for each.
[bhelgaas: split to separate patch, commit log]
Link: https://lore.kernel.org/r/20230113171409.30470-25-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Currently the DW eDMA driver only supports the linked lists memory
allocated locally with respect to the remote eDMA engine setup. It means
the linked lists will be accessible by the CPU via the MMIO space only. If
eDMA is embedded into the DW PCIe Root Ports or local Endpoints (which
support will be added in subsequent commits) the linked lists are supposed
to be allocated in the CPU memory. In that case the LL-entries can be
directly accessed, while the former case implies using the MMIO accessors
for that.
In order to have both cases supported by the driver, the dw_edma_region
descriptor should be fixed to contain the MMIO-backed and just memory-based
virtual addresses. The linked lists initialization procedure will use one
of them depending on the eDMA device nature. If the eDMA engine is embedded
into the local DW PCIe Root Port/Endpoint controllers, the list entries
will be directly accessed by referencing the corresponding structure
fields. Otherwise the MMIO accessors usage will be preserved.
Link: https://lore.kernel.org/r/20230113171409.30470-24-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Nothing big, cleanups, fixing names, and one small deviation from the
specification fixed.
-----BEGIN PGP SIGNATURE-----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=qBVV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Small fixes to the SMBus IPMI and IPMB driver.
Nothing big, cleanups, fixing names, and one small deviation from the
specification fixed"
* tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmi:
ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'
ipmi:ssif: Add a timer between request retries
ipmi:ssif: Remove rtc_us_timer
ipmi_ssif: Rename idle state and check
ipmi:ssif: resend_msg() cannot fail
- New drivers
* Infineon TDA38640 Voltage Regulator
* NXP MC34VR500 PMIC
* GXP fan controller
* MPQ7932 Power Management IC
- New chip or board support added to existing drivers
* it87: IT87952E; also other cleanup/improvements
* intel-m10-bmc-hwmon: N6000
* pmbus/max16601: MAX16600
* aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer Poweradjust 3,
Aquacomputer Aquaero
* nct6775: Support for B650/B660/X670 ASUS boards
* oxp-sensors: AYANEO AIR and AIR Pro
- Other notable changes
* Various kernel documentation fixes
* Various devicetree bindings fixes
* Explicitly deprecated [devm_]hwmon_device_register_with_groups
* ftsteutates: Support for fanX_fault and other cleanup
* ltc2945: Support for setting shunt resistor and other cleanup/fixes
* coretemp: Avoid RDMSR interrupts to isolated CPUs,
and simplify platform device handling
- Vaious other minoc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=yXoY
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Infineon TDA38640 Voltage Regulator
- NXP MC34VR500 PMIC
- GXP fan controller
- MPQ7932 Power Management IC
New chip or board support added to existing drivers:
- it87: IT87952E; also other cleanup/improvements
- intel-m10-bmc-hwmon: N6000
- pmbus/max16601: MAX16600
- aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer
Poweradjust 3, Aquacomputer Aquaero
- nct6775: Support for B650/B660/X670 ASUS boards
- oxp-sensors: AYANEO AIR and AIR Pro
Other notable changes:
- Various kernel documentation fixes
- Various devicetree bindings fixes
- Explicitly deprecated [devm_]hwmon_device_register_with_groups
- ftsteutates: Support for fanX_fault and other cleanup
- ltc2945: Support for setting shunt resistor and other cleanup/fixes
- coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify
platform device handling
... and various other minor cleanups and fixes"
* tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits)
hwmon: Deprecate [devm_]hwmon_device_register_with_groups
hwmon: (mlxreg-fan) Return zero speed for broken fan
hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource()
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3
hwmon: (iio_hwmon) use dev_err_probe
hwmon: intel-m10-bmc-hwmon: Add N6000 sensors
Docs/hwmon/index: Add missing SPDX License Identifier
hwmon: (it87) Updated documentation for recent updates to it87
hwmon: (it87) Add new chipset IT87952E
hwmon: (it87) Allow multiple chip IDs for force_id
hwmon: (it87) Add chip_id in some info message
hwmon: (it87) List full chip model name
hwmon: (it87) Disable configuration exit for certain chips
hwmon: (it87) Allow disabling exiting of configuration mode
Documentation: hwmon: correct spelling
hwmon: (pmbus/max16601) Add support for MAX16600
hwmon: (ltc2945) Allow setting shunt resistor
hwmon: (ltc2945) Handle error case in ltc2945_value_store
hwmon: (ltc2945) Add devicetree match table
...
-----BEGIN PGP SIGNATURE-----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=cBvC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- HID-BPF infrastructure: this allows to start using HID-BPF. Note that
the mechanism to ship HID-BPF program through the kernel tree is
still not implemented yet (but is planned).
This should be a no-op for 99% of users. Also we are gaining
kselftests for the HID tree (Benjamin Tissoires)
- Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin
Tissoires)
- Constify hid_ll_driver (Thomas Weißschuh)
- Allow more custom IIO sensors through HID (Philipp Jungkamp)
- Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien
Nocera)
- Some new device support: Steam Deck (Vicki Pfau), UClogic (José
Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman),
EVision keyboards (Philippe Valembois)
- other assorted code cleanups and fixes
* tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits)
HID: mcp-2221: prevent UAF in delayed work
hid: bigben_probe(): validate report count
HID: asus: use spinlock to safely schedule workers
HID: asus: use spinlock to protect concurrent accesses
HID: bigben: use spinlock to safely schedule workers
HID: bigben_worker() remove unneeded check on report_field
HID: bigben: use spinlock to protect concurrent accesses
HID: logitech-hidpp: Add myself to authors
HID: logitech-hidpp: Retry commands when device is busy
HID: logitech-hidpp: Add more debug statements
HID: Add support for Logitech G923 Xbox Edition steering wheel
HID: logitech-hidpp: Add Signature M650
HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk
HID: logitech-hidpp: Don't restart communication if not necessary
HID: logitech-hidpp: Add constants for HID++ 2.0 error codes
Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"
HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
HID: i2c-hid: goodix: Add mainboard-vddio-supply
dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply
HID: i2c-hid: goodix: Stop tying the reset line to the regulator
...
- Add PINCTRL_PINFUNCTION() macro and use it in several
drivers.
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon"
(always-on) pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin
controller.
- New subdrivers for the Qualcomm SM8550 SoC and LPASS
pin controllers.
- New subdriver for the Qualcomm SA8775P SoC pin controller.
- New subdriver for the Qualcomm IPQ5332 SoC pin controller.
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC
pin control.
- New subdriver for the Mediatek MT7981 SoC pin controller.
Improvements:
- Several cleanups and refactorings to the Intel drivers.
- Add 4KOhm bias support to the Intel driver.
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver.
- Support general purpose clocks in the Qualcomm MSM8226 SoC.
- Several conversions to use the new I2C .probe_new() call.
- Massive clean-up of the Qualcomm Device Tree YAML schemas.
- Add VIN[45] pins, groups and functions to the Renesas
r8a77950 SoC driver.
-----BEGIN PGP SIGNATURE-----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=P75R
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the code to
using software nodes
- remove more interfaces referring to the global GPIO numberspace that we're
getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci, gpio-ge,
gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks, use
generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu MB86S7x, Unisoc
GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings
-----BEGIN PGP SIGNATURE-----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=wWXb
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"A rather small update, there are no new drivers, just improvements and
refactoring in existing ones.
Thanks to migrating of several drivers to using generalized APIs and
dropping of OF interfaces in favor of using software nodes we're
actually removing more code than we're adding.
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the
code to using software nodes
- remove more interfaces referring to the global GPIO numberspace
that we're getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq
API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci,
gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks,
use generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in
gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in
gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu
MB86S7x, Unisoc GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings"
* tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: sim: Use %pfwP specifier instead of calling fwnode API directly
gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping()
gpiolib: of: Move enum of_gpio_flags to its only user
gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
gpio: zevio: Add missing header
gpio: Get rid of gpio_to_chip()
gpio: pcf857x: Drop unneeded explicit casting
gpio: pcf857x: Make use of device properties
gpio: pcf857x: Get rid of legacy platform data
gpio: rockchip: Do not mention legacy API in the code
gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
gpio: zevio: Use proper headers and drop OF_GPIO dependency
gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
dt-bindings: gpio: Add compatible string for Unisoc UMS512
dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml
gpio: ge: Remove duplicate assignment of of_gpio_n_cells
gpio: davinci: Remove duplicate assignment of of_gpio_n_cells
gpio: omap: use dynamic allocation of base
...
This has been a fairly quiet release for SPI, though it is likely that
the next release will have some big changes as there's some preparatory
work for multiple chip select support gone in - the rest of the code is
on the list but will need to be rebased onto -rc1. Otherwise there's a couple
of new tunables for chip select timings, some new devices and smaller
device specific updates and fixes.
- Support for configuring the hold and minimum inactive times for chip
selects.
- Beginnings of support for supporting devices which have multiple chip
selects on a single device.
- Support for newer Broadcom HSSPI and Intel controllers, Silicon Labs
EM3581 and SI3210.
There is a simple add/add conflict in MAINTAINERS with the I2C tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPzcwwACgkQJNaLcl1U
h9B3egf/Yo9cnaB473bDfIOmx/AAKU33U059n27CKdbkOy/pqP7zTaurne0aTFDD
SsJh9+Akmb4aBQTTT8RRn9zLho6pX2lUrtFDKjbVB1DM/E7Bad8EsMlqBGLpGUNs
GmEsa99XtUlcEeORq3HIObZ2G2v+Jy0IiidCUyTo48JZBAV3pvI5J8SPUwpWMfqM
fq2U5kCXjxlheQsa4FLzMqnWS91D3H58XFboPQJ2y29sqWSq2OnD/mt9XQVHcvbg
zzL/EfOYoIpw8c9Qf2ZPoLDzRZAdVhugFoMRKccW8OD/v5Rfaf02vhtwfz3G7JpV
So+eEIVSJniavgpBMnUY4tqTOxDe/g==
=xz0n
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a fairly quiet release for SPI, though it is likely that
the next release will have some big changes as there's some
preparatory work for multiple chip select support gone in - the rest
of the code is on the list but will need to be rebased onto -rc1.
Otherwise there's a couple of new tunables for chip select timings,
some new devices and smaller device specific updates and fixes.
- Support for configuring the hold and minimum inactive times for
chip selects.
- Beginnings of support for supporting devices which have multiple
chip selects on a single device.
- Support for newer Broadcom HSSPI and Intel controllers, Silicon
Labs EM3581 and SI3210"
* tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (67 commits)
spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domains
spi: spidev: drop the incorrect notice from Kconfig
spi: bcm63xx-hsspi: fix error code in probe
spi: bcmbca-hsspi: Fix error code in probe() function
spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
spi: intel: Check number of chip selects after reading the descriptor
spi: xilinx: add force_irq for QSPI mode
spi: spi-st-ssc: convert to DT schema
spi: Reorder fields in 'struct spi_transfer'
spi: cadence-quadspi: use STIG mode for small reads
spi: cadence-quadspi: setup ADDR Bits in cmd reads
spi: cadence-quadspi: Add flag for direct mode writes
spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion
MAINTAINERS: Remove file reference for Broadcom Broadband SoC HS SPI driver entry
spi: bcm63xx-hsspi: bcmbca-hsspi: fix _be16 type usage
MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
spi: bcm63xx-hsspi: Disable spi mem dual io read op support
spi: spi-mem: Allow controller supporting mem_ops without exec_op
spi: bcm63xx-hsspi: Add prepend mode support
...
This has been a very quiet release for the regulator API, there's one
new driver for the Maxim MAX20411, some DT schema conversions and some
small tweaks and improvements but really nothing major at all.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPza80ACgkQJNaLcl1U
h9BJkAf7B/o0QVtyCyJSsoJ9QelMjq8Pbps5aEYlwhSnqZQtJnZEcX3NucJJuLBJ
IQ4K6XbDZtyODzRvB+Xy2/1QPEJC94oaxEN8Cw1rjolsJ8IL7NOa+h56gTRNouw+
7DlbAbM3EcmwiizZT74Hw4yqYkTUWsrN0K/O5ygs5sL/QfDV1LTnWTqoympoTgeN
UDk3B8VMmWmQ83i04oX/lZ28h9iKs8KVoB5rNRWHi0ypF/LMiADm1WWbhsou+vtO
uJp7UzTqQiIXkLBgKv2Oz0i4cFHNFnBDyTT8M8hL76xs/R94K1gTidSMoZremJ0F
RZX0UWHBK5fF24HIWKdzc+Iz57lgUA==
=FSkC
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release for the regulator API: there's one
new driver for the Maxim MAX20411, some DT schema conversions and some
small tweaks and improvements but really nothing major at all"
* tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (22 commits)
regulator: max597x: Align for simple_mfd_i2c driver
regulator: max20411: Fix off-by-one for n_voltages setting
regulator: max597x: Remove unused variable
regulator: tps65219: use generic set_bypass()
regulator: s5m8767: Bounds check id indexing into arrays
regulator: max77802: Bounds check regulator id against opmode
regulator: max20411: Convert to i2c's .probe_new()
regulator: scmi: Allow for zero voltage domains
regulator: max20411: Directly include bitfield.h
regulator: Introduce Maxim MAX20411 Step-Down converter
regulator: dt-bindings: Describe Maxim MAX20411
regulator: dt-bindings: qcom-labibb: Allow regulator-common properties
regulator: dt-bindings: fixed-regulator: allow gpios property
regulator: tps65219: use IS_ERR() to detect an error pointer
regulator: mcp16502: add enum MCP16502_REG_HPM description
regulator: fixed-helper: use the correct function name in comment
regulator: act8945a: fix non-kernel-doc comments
dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema
regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema
regulator: dt-bindings: qcom,usb-vbus-regulator: change node name
...
A quiet release for regmap, we've seen several cleanups, an update for a
change in the MDIO APIs and one small fix.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPzatMACgkQJNaLcl1U
h9BJjwf/Z8lGWykBdFhQw2vvauWMjm4cBCpLONK70mXOVouApepVW8xQAXT8sQ86
ADyeSGJmB1P+b/TyO4q7gqF0qBKE5T9gOhjhmp++robCEHXzX3/h2YtobTWpFdzO
34UOAi0PBIGhnEwgK9HWb/rYMS3DBy6oKd6IxVK1TX6LXxjW3OoTuxd+lNjDE7nM
eGMnyMF1TcxAsUdlTMiyUgt0e/xxir4UOvmzYz7rkbVQf6AyrmOUyMt+iTuW7jQ6
DUUwpAfVilEN5K6Drc+4Lv+ydCw4PATXLdYX3cBQygeptvQ6PCxgulXvT7OcQMph
rCirnu9gcYcKLFcFI5LhxQOZ7VAcBQ==
=tjm7
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A quiet release for regmap: we've seen several cleanups, an update for
a change in the MDIO APIs and one small fix"
* tag 'regmap-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Remove unused mask_invert flag
regmap-irq: Remove unused type_invert flag
regmap: Reorder fields in 'struct regmap_bus' to save some memory
regmap: apply reg_base and reg_downshift for single register ops
modpost reports section mismatch errors/warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
This "(unknown) (section: .init.data)" all refer to svm_x86_ops.
Tag svm_hv_hardware_setup() with __init to fix a modpost warning as the
non-stub implementation accesses __initdata (svm_x86_ops), i.e. would
generate a use-after-free if svm_hv_hardware_setup() were actually invoked
post-init. The helper is only called from svm_hardware_setup(), which is
also __init, i.e. lack of __init is benign other than the modpost warning.
Fixes: 1e0c7d40758b ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230222073315.9081-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works,
and not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements
-----BEGIN PGP SIGNATURE-----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=9s9c
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works, and
not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements"
* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
ASoC: soc-ac97: Return correct error codes
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
ASoC: cs35l45: Remove separate namespace for tables
ASoC: cs35l45: Remove separate tables module
ASoC: soc-ac97: Convert to agnostic GPIO API
ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
ALSA: hda: cs35l41: Enable Amp High Pass Filter
ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
ALSA: hda: cs35l41: Correct error condition handling
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
ASoC: Intel: Skylake: Fix struct definition
ASoC: tlv320adcx140: extend list of supported samplerates
ASoC: imx-pcm-rpmsg: Remove unused variable
SoC: rt5682s: Disable jack detection interrupt during suspend
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
ASoC: SOF: Intel: Enable d0i3 work for ipc4
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
...
Building a kcsan enabled kernel for x86_64 with gcc-11 results in a lot
of build warnings or errors without CONFIG_CONSTRUCTORS:
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/copy_mc.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/cpu.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/csum-partial_64.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/csum-wrappers_64.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/insn-eval.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/insn.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/misc.o'
The same thing has been reported for mips64. I can't reproduce it for
any other compiler version, so I don't know if constructors are always
required here or if this is a gcc-11 specific implementation detail.
I see no harm in always enabling constructors here, and this reliably
fixes the build warnings for me.
Link: https://lore.kernel.org/lkml/202204181801.r3MMkwJv-lkp@intel.com/T/
Cc: Kees Cook <keescook@chromium.org>
See-also: 3e6631485fae ("vmlinux.lds.h: Keep .ctors.* with .ctors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 74e19ef0ff80 ("uaccess: Add speculation barrier to
copy_from_user()") built fine on x86-64 and arm64, and that's the extent
of my local build testing.
It turns out those got the <linux/nospec.h> include incidentally through
other header files (<linux/kvm_host.h> in particular), but that was not
true of other architectures, resulting in build errors
kernel/bpf/core.c: In function ‘___bpf_prog_run’:
kernel/bpf/core.c:1913:3: error: implicit declaration of function ‘barrier_nospec’
so just make sure to explicitly include the proper <linux/nospec.h>
header file to make everybody see it.
Fixes: 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patchwork automation reported a sparse complaint that
spin_shadow_stack was not declared and should be static:
../arch/riscv/kernel/traps.c:335:15: warning: symbol 'spin_shadow_stack' was not declared. Should it be static?
However, this is used in entry.S and therefore shouldn't be static.
The same applies to the shadow_stack that this pseudo spinlock is
trying to protect, so do like its charge and add a declaration to
thread_info.h
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 7e1864332fbc ("riscv: fix race when vmap stack overflow")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230210185945.915806-1-conor@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Revert the postponement of clk_disable_unused() for clock providers that
implement sync_state, and the change to drivers implementing this, until
agreement on the implementation has been reached.
This reverts:
29e31415e14e ("clk: qcom: Remove need for clk_ignore_unused on sc8280xp")
99c0f7d35c4b ("clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback")
26b36df75166 ("clk: Add generic sync_state callback for disabling unused clocks")
Requested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document Mediatek mt8365-syscfg
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-4-bero@baylibre.com
Four separate mfd drivers are in the "tmio" family, and all of
them were used in now-removed PXA machines (eseries, tosa, and
hx4700), so the mfd drivers and all its children can be removed
as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105134622.254560-19-arnd@kernel.org
Convert gfs2_page_add_databufs() to folios and rename it to
gfs2_trans_add_databufs().
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The ->writepage() and ->writepages() operations are supposed to write
entire pages. However, on filesystems with a block size smaller than
PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the
current transaction instead of adding the entire page. Fix that.
Fixes: 18ec7d5c3f43 ("[GFS2] Make journaled data files identical to normal files on disk")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add Kinetic KTZ8866 backlight binding documentation.
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120155018.15376-1-lujianhua000@gmail.com
Most but not all PWMs drive the PWM pin to its inactive state when
disabled. However if there is no enable_gpio and no regulator the PWM
must drive the inactive state to actually disable the backlight.
So keep the PWM on in this case.
Note that to determine if there is a regulator some effort is required
because it might happen that there isn't actually one but the regulator
core gave us a dummy. (A nice side effect is that this makes the
regulator actually optional even on fully constrained systems.)
This fixes backlight disabling e.g. on i.MX6 when an inverted PWM is
used.
Hint for the future: If this change results in a regression, the bug is
in the lowlevel PWM driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120120018.161103-3-u.kleine-koenig@pengutronix.de
When the function pwm_backlight_update_status() was called with
brightness > 0, pwm_get_state() was called twice (once directly and once
in compute_duty_cycle). Also pwm_apply_state() was called twice (once in
pwm_backlight_power_on() and once directly).
Optimize this to do both calls only once.
Note that with this affects the order of regulator and PWM setup. It's
not expected to have a relevant effect on hardware. The rationale for
this is that the regulator (and the GPIO) are reasonable to switch in
pwm_backlight_power_on()/pwm_backlight_power_off() but the PWM has
nothing to do with power. (The post_pwm_on_delay and pwm_off_delay are
still there though.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120120018.161103-2-u.kleine-koenig@pengutronix.de
The PXA tosa machine was removed, so this backlight driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105134622.254560-10-arnd@kernel.org
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230106164856.1453819-2-steve@sk2.org
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230106164856.1453819-4-steve@sk2.org
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230106164856.1453819-3-steve@sk2.org
Correct the struct name and add a short struct description to fix the
kernel-doc notation.
Prevents this kernel-doc warning:
drivers/video/backlight/sky81452-backlight.c:64: warning: expecting prototype for struct sky81452_platform_data. Prototype was for struct sky81452_bl_platform_data instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230113064118.30169-1-rdunlap@infradead.org
There is no in-tree user left which relies on legacy probing. So drop
support for it which removes another user of the deprecated
pwm_request() function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221117072151.3789691-1-u.kleine-koenig@pengutronix.de
Document the compatible for the wled block found in PMI8950.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221101161801.1058969-1-luca@z3ntu.xyz
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220926142059.2294282-1-yangyingliang@huawei.com
backlight_put() has been dropped, we should call put_device() to drop
the reference taken by backlight_device_get_by_name().
Fixes: 0f6a3256fd81 ("backlight: backlight: Drop backlight_put()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221215071902.424005-1-linmq006@gmail.com
Initial support of HID-BPF (Benjamin Tissoires)
The history is a little long for this series, as it was intended to be
sent for v6.2. However some last minute issues forced us to postpone it
to v6.3.
Conflicts:
* drivers/hid/i2c-hid/Kconfig:
commit bf7660dab30d ("HID: stop drivers from selecting CONFIG_HID")
conflicts with commit 2afac81dd165 ("HID: fix I2C_HID not selected
when I2C_HID_OF_ELAN is")
the resolution is simple enough: just drop the "default" and "select"
lines as the new commit from Arnd is doing
- dev_dbg cleanup (Thomas Weißschuh)
- cleanup i2c-hid-acpi (Andy Shevchenko)
- goodix: revert/fixes for an actual production device compared to the
manufacturer sample (Douglas Anderson)
