IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"Two tiny fixes for issues that make drivers under Xen unhappy under
certain conditions"
* 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single
swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
The referenced commit added in .config_intr() the part of code which upon
configuration of the IRQ state it also clears up any pending IRQ. If
there were actually pending IRQs, a read on the IRQ status register will
return something non zero. This should not result in the callback
returning an error.
Fix this by returning an error only when the result of the
phy_read_mmd() is negative.
Fixes: e11ef96d44f1 ("net: phy: aquantia: remove the use of .ack_interrupt()")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20201109154601.3812574-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder says:
====================
net: ipa: little fixes
This series adds a few small fixes to the IPA code.
The first patch appeared in a different form in June, and got some
pushback from David because he felt a problem that can be caught at
build time *should* be caught at build time.
https://lore.kernel.org/netdev/20200610195332.2612233-1-elder@linaro.org/
I agree with that, but in this case the "problem" was never actually
a problem. There's a little more explanation on the patch, but
basically now we remove the BUILD_BUG_ON() call entirely.
The second deletes a line of code that isn't needed.
The third converts a warning message to be a debug, as requested by
Stephen Boyd.
And the last one just gets rid of an error message that would be
output after a different message had already reported a problem.
====================
Link: https://lore.kernel.org/r/20201109165635.5449-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need for gsi_modem_channel_halt() to report an error,
because gsi_generic_command() will already have done that if the
command times out. So get rid of the extra message.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we determine from hardware what the size of IPA memory is
we compare it against what we learned about it from DT.
If DT defines a region that's larger than actual memory, we use the
smaller actual size and issue a warning.
If DT defines a smaller region than actual memory we issue a warning
too. But in this case the difference is harmless; so rather than
issuing a warning, just provide a debug message instead.
Reorder these checks so the one that matters more is done first.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete a spurious line of code in ipa_hardware_config(). It reads a
register value then ignores the value, so is completely unnecessary.
Add a missing word in a comment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following call in ipa_validate_build() is erroneous:
BUILD_BUG_ON(sizeof(struct gsi_trans) > 128);
The fact is, it is not a bug for the size of a GSI transaction to be
bigger than 128 bytes. The correct operation of the driver is not
dependent on the size of this structure. The only consequence of
the transaction being large is that the amount of memory required
is larger.
The problem this was trying to flag is that a *slight* increase in
the size of this structure will have a disproportionate effect on
the amount of memory used. E.g. if the structure grew to 132 bytes
the memory requirement for the transaction arrays would be about
double.
With various debugging build flags enabled, the size grows to 160
bytes. But there's no reason to treat that as a build-time bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jean-Philippe Brucker says:
====================
A few fixes for cross and out-of-tree build of bpftool and runqslower.
These changes allow to build for different target architectures, using
the same source tree.
Since [v2], I addressed Andrii's comments on patches 3 and 5, and added
patch 7 which fixes a build slowdown.
[v2] https://lore.kernel.org/bpf/20201109110929.1223538-1-jean-philippe@linaro.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Commit ba2fd563b740 ("tools/bpftool: Support passing BPFTOOL_VERSION to
make") changed BPFTOOL_VERSION to a recursively expanded variable,
forcing it to be recomputed on every expansion of CFLAGS and
dramatically slowing down the bpftool build. Restore BPFTOOL_VERSION as
a simply expanded variable, guarded by an ifeq().
Fixes: ba2fd563b740 ("tools/bpftool: Support passing BPFTOOL_VERSION to make")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-8-jean-philippe@linaro.org
When cross building runqslower for an other architecture, the
intermediate bpftool used to generate a skeleton must be built using the
host toolchain. Pass HOSTCC and HOSTLD, defined in Makefile.include, to
the bpftool Makefile.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-7-jean-philippe@linaro.org
Makefile.include defines variables such as OUTPUT and CC for out-of-tree
build and cross-build. Include it into the runqslower Makefile and use
its $(QUIET*) helpers.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-5-jean-philippe@linaro.org
The bpftool build first creates an intermediate binary, executed on the
host, to generate skeletons required by the final build. When
cross-building bpftool for an architecture different from the host, the
intermediate binary should be built using the host compiler (gcc) and
the final bpftool using the cross compiler (e.g. aarch64-linux-gnu-gcc).
Generate the intermediate objects into the bootstrap/ directory using
the host toolchain.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-4-jean-philippe@linaro.org
Cleaning a partial build can fail if the output directory for libbpf
wasn't created:
$ make -C tools/bpf/bpftool O=/tmp/bpf clean
/bin/sh: line 0: cd: /tmp/bpf/libbpf/: No such file or directory
tools/scripts/Makefile.include:17: *** output directory "/tmp/bpf/libbpf/" does not exist. Stop.
make: *** [Makefile:36: /tmp/bpf/libbpf/libbpf.a-clean] Error 2
As a result make never gets around to clearing the leftover objects. Add
the libbpf output directory as clean dependency to ensure clean always
succeeds (similarly to the "descend" macro). The directory is later
removed by the clean recipe.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-3-jean-philippe@linaro.org
Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
Make sure btf_parse_module() is compiled out if module BTFs are not enabled.
Fixes: 36e68442d1af ("bpf: Load and verify kernel module BTFs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201111040645.903494-1-andrii@kernel.org
Julian Wiedmann says:
====================
net/iucv: fixes 2020-11-09
One fix in the shutdown path for af_iucv sockets. This is relevant for
stable as well.
Also sending along an update for the Maintainers file.
v1 -> v2: use the correct Fixes tag in patch 1 (Jakub)
====================
Link: https://lore.kernel.org/r/20201109075706.56573-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I am retiring soon. Thus this patch removes myself from the
MAINTAINERS file (s390 network).
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: fix up the subject]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported the following KASAN finding:
BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
Read of size 2 at addr 000000000000021e by task syz-executor907/519
CPU: 0 PID: 519 Comm: syz-executor907 Not tainted 5.9.0-syzkaller-07043-gbcf9877ad213 #0
Hardware name: IBM 3906 M04 701 (KVM/Linux)
Call Trace:
[<00000000c576af60>] unwind_start arch/s390/include/asm/unwind.h:65 [inline]
[<00000000c576af60>] show_stack+0x180/0x228 arch/s390/kernel/dumpstack.c:135
[<00000000c9dcd1f8>] __dump_stack lib/dump_stack.c:77 [inline]
[<00000000c9dcd1f8>] dump_stack+0x268/0x2f0 lib/dump_stack.c:118
[<00000000c5fed016>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:383
[<00000000c5fec82a>] __kasan_report mm/kasan/report.c:517 [inline]
[<00000000c5fec82a>] kasan_report+0x11a/0x168 mm/kasan/report.c:534
[<00000000c98b5b60>] iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
[<00000000c98b6262>] iucv_sock_shutdown+0x44a/0x4c0 net/iucv/af_iucv.c:1457
[<00000000c89d3a54>] __sys_shutdown+0x12c/0x1c8 net/socket.c:2204
[<00000000c89d3b70>] __do_sys_shutdown net/socket.c:2212 [inline]
[<00000000c89d3b70>] __s390x_sys_shutdown+0x38/0x48 net/socket.c:2210
[<00000000c9e36eac>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415
There is nothing to shutdown if a connection has never been established.
Besides that iucv->hs_dev is not yet initialized if a socket is in
IUCV_OPEN state and iucv->path is not yet initialized if socket is in
IUCV_BOUND state.
So, just skip the shutdown calls for a socket in these states.
Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support")
Fixes: 82492a355fac ("af_iucv: add shutdown for HS transport")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: correct one Fixes tag]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
inet: prevent skb changes in udp{4|6}_lib_lookup_skb()
This came while reviewing Alexander Lobakin patch against UDP GRO:
We want to make sure skb wont be changed by these helpers
while it is owned by GRO stack.
====================
Link: https://lore.kernel.org/r/20201109231349.20946-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb is needed only to fetch the keys for the lookup.
Both functions are used from GRO stack, we do not want
accidental modification of the skb.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_sdif() does not modify the skb.
This will permit propagating the const qualifier in
udp{4|6}_lib_lookup_skb() functions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the net core, the struct net_device_ops -> ndo_set_rx_mode()
callback is called with the dev->addr_list_lock spinlock held.
However, this driver's ndo_set_rx_mode callback eventually calls
lan743x_dp_write(), which acquires a mutex. Mutex acquisition
may sleep, and this is not allowed when holding a spinlock.
Fix by removing the dp_lock mutex entirely. Its purpose is to
prevent concurrent accesses to the data port. No concurrent
accesses are possible, because the dev->addr_list_lock
spinlock in the core only lets through one thread at a time.
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mv88e6xxx_fid_map return error, we lost free the table.
Fix it.
Fixes: bfb255428966 ("net: dsa: mv88e6xxx: Add devlink regions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangxiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201109144416.1540867-1-zhangxiaoxu5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The left shift of u16 variable high is promoted to the type int and
then sign extended to a 64 bit u64 value. If the top bit of high is
set then the upper 32 bits of the result end up being set by the
sign extension. Fix this by explicitly casting the value in high to
a u64 before left shifting by 16 places.
Also, remove the initialisation of variable value to 0 at the start
of each loop iteration as the value is never read and hence the
assignment it is redundant.
Addresses-Coverity: ("Unintended sign extension")
Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20201109124008.2079873-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.
Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some typos are found out by misspell-fixer tool:
$ misspell-fixer -rnv ./net/sched/
./net/sched/act_api.c:686
./net/sched/act_bpf.c:68
./net/sched/cls_rsvp.h:241
./net/sched/em_cmp.c:44
./net/sched/sch_pie.c:408
Fix typos found by misspell-fixer.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/5fa8e9d4.1c69fb81.5d889.5c64@mx.google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8401-internal PHY identifies as RTL8201CP, and the init
sequence in r8169, copied from vendor driver r8168, uses paged
operations. Therefore set the same paged operation callbacks as
for the other Realtek PHY's.
Fixes: cdafdc29ef75 ("r8169: sync support for RTL8401 with vendor driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/69882f7a-ca2f-e0c7-ae83-c9b6937282cd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6f197fb63850 ("lan743x: Added fixed link and RGMII support")
assumes that chips with an internal PHY will never have a devicetree
entry. This is incorrect: even for these chips, a devicetree entry
can be useful e.g. to pass the mac address from bootloader to chip:
&pcie {
status = "okay";
host@0 {
reg = <0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
lan7430: ethernet@0 {
/* LAN7430 with internal PHY */
compatible = "microchip,lan743x";
status = "okay";
reg = <0 0 0 0 0>;
/* filled in by bootloader */
local-mac-address = [00 00 00 00 00 00];
};
};
};
If a devicetree entry is present, the driver will not attach the chip
to its internal phy, and the chip will be non-operational.
Fix by tweaking the phy connection algorithm:
- first try to connect to a phy specified in the devicetree
(could be 'real' phy, or just a 'fixed-link')
- if that doesn't succeed, try to connect to an internal phy, even
if the chip has a devnode
Tested on a LAN7430 with internal PHY. I cannot test a device using
fixed-link, as I do not have access to one.
Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support")
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201108171224.23829-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
In comment 173ca26e9b51 ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added some bpf tunnel tests. In commit 933a741e3b82
("selftests/bpf: bpf tunnel test.") when we moved it to the current
folder, we missed some points:
1. ip6ip6 test is not added
2. forgot to remove test_ipip.sh in sample folder
3. TCP test code is not removed in test_tunnel_kern.c
In this patch set I add back ip6ip6 test and remove unused code. I'm not sure
if this should be net or net-next, so just set to net.
Here is the test result:
```
Testing IP6IP6 tunnel...
PING ::11(::11) 56 data bytes
--- ::11 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 63ms
rtt min/avg/max/mdev = 0.014/1028.308/2060.906/841.361 ms, pipe 2
PING 1::11(1::11) 56 data bytes
--- 1::11 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 48ms
rtt min/avg/max/mdev = 0.026/0.029/0.036/0.006 ms
PING 1::22(1::22) 56 data bytes
--- 1::22 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 47ms
rtt min/avg/max/mdev = 0.030/0.048/0.067/0.016 ms
PASS: ip6ip6tnl
```
v3:
Add back ICMP check as Martin suggested.
v2: Keep ip6ip6 section in test_tunnel_kern.c.
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tcbpf2_kern.o and related kernel sections are moved to bpf
selftest folder since b05cd7404323 ("samples/bpf: remove the bpf tunnel
testsuite."). Remove this one as well.
Fixes: b05cd7404323 ("samples/bpf: remove the bpf tunnel testsuite.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-3-liuhangbin@gmail.com
In comment 173ca26e9b51 ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit
933a741e3b82 ("selftests/bpf: bpf tunnel test.") when we moved it to
the current folder, we didn't add it.
This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's
topology for both IPv4 and IPv6 testing. Since iperf test is removed as
currect framework simplified it in purpose, I also removed unused tcp
checkings in test_tunnel_kern.c.
Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
The current NetLabel code doesn't correctly keep track of the netlink
dump state in some cases, in particular when multiple interfaces with
large configurations are loaded. The problem manifests itself by not
reporting the full configuration to userspace, even though it is
loaded and active in the kernel. This patch fixes this by ensuring
that the dump state is properly reset when necessary inside the
netlbl_unlabel_staticlist() function.
Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@sifl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
This patch set adds BTF generation for kernel modules using a compact split
BTF approach. Respective patches have all the details.
Kernel module BTFs rely on pahole's split BTF support, which is added in [0]
and will be available starting from v1.19. Support for it is detected
automatically during kernel build time.
This patch set implements in-kernel support for split BTF loading and
validation. It also extends GET_OBJ_INFO API for BTFs to return BTF's module
name and a flag whether BTF itself is in-kernel or user-provided. vmlinux BTF
is also exposed to user-space through the same BTF object iteration APIs.
Follow up patch set will utilize the fact that vmlinux and module BTFs now
have associated ID to provide ability to attach BPF fentry/fexit/etc programs
to functions defined in kernel modules.
bpftool is also extended to show module/vmlinux BTF's name.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=378699&state=*
v3->v4:
- copy_to_user() on ENOSPC in btf_get_info_by_fd() (Martin);
v2->v3:
- get rid of unnecessary gotos (Song);
v2->v1:
- drop WARNs, add fewer pr_warn()'s instead (Greg);
- properly initialize sysfs binary attribute structure (Greg);
- add __maybe_unused to any_section_objs, used conditionally by module BTF;
rfc->v1:
- CONFIG_DEBUG_INFO_BTF_MODULES is derived automatically (Alexei);
- vmlinux BTF now has explicit "vmlinux" name (Alexei);
- added sysfs ABI documentation for /sys/kernel/btf/<module> (Greg).
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Display vmlinux BTF name and kernel module names when listing available BTFs
on the system.
In human-readable output mode, module BTFs are reported with "name
[module-name]", while vmlinux BTF will be reported as "name [vmlinux]".
Square brackets are added by bpftool and follow kernel convention when
displaying modules in human-readable text outputs.
[vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s
1: name [vmlinux] size 4082281B
6: size 2365B prog_ids 8,6 map_ids 3
7: name [button] size 46895B
8: name [pcspkr] size 42328B
9: name [serio_raw] size 39375B
10: name [floppy] size 57185B
11: name [i2c_core] size 76186B
12: name [crc32c_intel] size 16036B
13: name [i2c_piix4] size 50497B
14: name [irqbypass] size 14124B
15: name [kvm] size 197985B
16: name [kvm_intel] size 123564B
17: name [cryptd] size 42466B
18: name [crypto_simd] size 17187B
19: name [glue_helper] size 39205B
20: name [aesni_intel] size 41034B
25: size 36150B
pids bpftool(2519)
In JSON mode, two fields (boolean "kernel" and string "name") are reported for
each BTF object. vmlinux BTF is reported with name "vmlinux" (kernel itself
returns and empty name for vmlinux BTF).
[vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s -jp
[{
"id": 1,
"size": 4082281,
"prog_ids": [],
"map_ids": [],
"kernel": true,
"name": "vmlinux"
},{
"id": 6,
"size": 2365,
"prog_ids": [8,6
],
"map_ids": [3
],
"kernel": false
},{
"id": 7,
"size": 46895,
"prog_ids": [],
"map_ids": [],
"kernel": true,
"name": "button"
},{
...
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-6-andrii@kernel.org
Add kernel module listener that will load/validate and unload module BTF.
Module BTFs gets ID generated for them, which makes it possible to iterate
them with existing BTF iteration API. They are given their respective module's
names, which will get reported through GET_OBJ_INFO API. They are also marked
as in-kernel BTFs for tooling to distinguish them from user-provided BTFs.
Also, similarly to vmlinux BTF, kernel module BTFs are exposed through
sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space
tools to inspect module BTF contents and dump their types with existing tools:
[vmuser@archvm bpf]$ ls -la /sys/kernel/btf
total 0
drwxr-xr-x 2 root root 0 Nov 4 19:46 .
drwxr-xr-x 13 root root 0 Nov 4 19:46 ..
...
-r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass
-r--r--r-- 1 root root 100225 Nov 4 19:46 kvm
-r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel
-r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr
-r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw
-r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-5-andrii@kernel.org
Detect if pahole supports split BTF generation, and generate BTF for each
selected kernel module, if it does. This is exposed to Makefiles and C code as
CONFIG_DEBUG_INFO_BTF_MODULES flag.
Kernel module BTF has to be re-generated if either vmlinux's BTF changes or
module's .ko changes. To achieve that, I needed a helper similar to
if_changed, but that would allow to filter out vmlinux from the list of
updated dependencies for .ko building. I've put it next to the only place that
uses and needs it, but it might be a better idea to just add it along the
other if_changed variants into scripts/Kbuild.include.
Each kernel module's BTF deduplication is pretty fast, as it does only
incremental BTF deduplication on top of already deduplicated vmlinux BTF. To
show the added build time, I've first ran make only just built kernel (to
establish the baseline) and then forced only BTF re-generation, without
regenerating .ko files. The build was performed with -j60 parallelization on
56-core machine. The final time also includes bzImage building, so it's not
a pure BTF overhead.
$ time make -j60
...
make -j60 27.65s user 10.96s system 782% cpu 4.933 total
$ touch ~/linux-build/default/vmlinux && time make -j60
...
make -j60 123.69s user 27.85s system 1566% cpu 9.675 total
So 4.6 seconds real time, with noticeable part spent in compressed vmlinux and
bzImage building.
To show size savings, I've built my kernel configuration with about 700 kernel
modules with full BTF per each kernel module (without deduplicating against
vmlinux) and with split BTF against deduplicated vmlinux (approach in this
patch). Below are top 10 modules with biggest BTF sizes. And total size of BTF
data across all kernel modules.
It shows that split BTF "compresses" 115MB down to 5MB total. And the biggest
kernel modules get a downsize from 500-570KB down to 200-300KB.
FULL BTF
========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
115710691
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 570570
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 520240
./drivers/gpu/drm/radeon/radeon.ko 503849
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 491777
./fs/xfs/xfs.ko 411544
./drivers/net/ethernet/intel/i40e/i40e.ko 403904
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 398754
./drivers/infiniband/core/ib_core.ko 397224
./fs/cifs/cifs.ko 386249
./fs/nfsd/nfsd.ko 379738
SPLIT BTF
=========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
5194047
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 293206
./drivers/gpu/drm/radeon/radeon.ko 282103
./fs/xfs/xfs.ko 222150
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 198503
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 198356
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 113444
./fs/cifs/cifs.ko 109379
./arch/x86/kvm/kvm.ko 100225
./drivers/gpu/drm/drm.ko 94827
./drivers/infiniband/core/ib_core.ko 91188
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-4-andrii@kernel.org
Allocate ID for vmlinux BTF. This makes it visible when iterating over all BTF
objects in the system. To allow distinguishing vmlinux BTF (and later kernel
module BTF) from user-provided BTFs, expose extra kernel_btf flag, as well as
BTF name ("vmlinux" for vmlinux BTF, will equal to module's name for module
BTF). We might want to later allow specifying BTF name for user-provided BTFs
as well, if that makes sense. But currently this is reserved only for
in-kernel BTFs.
Having in-kernel BTFs exposed IDs will allow to extend BPF APIs that require
in-kernel BTF type with ability to specify BTF types from kernel modules, not
just vmlinux BTF. This will be implemented in a follow up patch set for
fentry/fexit/fmod_ret/lsm/etc.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-3-andrii@kernel.org
Adjust in-kernel BTF implementation to support a split BTF mode of operation.
Changes are mostly mirroring libbpf split BTF changes, with the exception of
start_id being 0 for in-kernel implementation due to simpler read-only mode.
Otherwise, for split BTF logic, most of the logic of jumping to base BTF,
where necessary, is encapsulated in few helper functions. Type numbering and
string offset in a split BTF are logically continuing where base BTF ends, so
most of the high-level logic is kept without changes.
Type verification and size resolution is only doing an added resolution of new
split BTF types and relies on already cached size and type resolution results
in the base BTF.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-2-andrii@kernel.org
The '!=' expression itself is bool, no need to convert it to bool.
Fix the following coccicheck warning:
./drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1477:34-39: WARNING: conversion to bool not needed here
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1604797919-10157-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
