IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
After an initial successful FLOGI into the switch, if a subsequent FLOGI
fails the driver crashed accessing a node struct. On FLOGI error, the flogi
completion logic triggers the final dereference on the node structure
without checking if it is registered with a backend. The devloss logic is
triggered after node is freed leading to the access of freed node.
Fix by adjusting the error path to not take the final dereferece if there
is an outstanding transport registration. Let the transport devloss call
remove the final reference.
Link: https://lore.kernel.org/r/20210301171821.3427-6-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Whenever an RRQ needs to be triggered, the DID from the node structure and
node pointer are stored in the RRQ data structure and the RRQ is scheduled
for later transmission. However, at the point in time that the timer
triggers, there's no validation on the node pointer. Reference counters may
have freed the structure. Additionally the DID in the node may no longer be
valid.
Fix by not tracking the node pointer in the RRQ, only the DID. At the time
of the timer expiration, look up the node with the did and if present, send
the RRQ. If no node exists, no need to send the RRQ.
Link: https://lore.kernel.org/r/20210301171821.3427-5-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An LBA is 8 bytes. The driver generates a reftag from the LBA but the
reftag is 4 bytes. Thus scsi_get_lba() could return a value that exceeds
our reftag size.
Fix by converting all the code to calling the common routine
t10_pi_ref_tag() which returns a u32, thus ensuring a consistent 4byte
value. Also correct a few code lines that access LBA directly and ensure
64-bit data types are used.
Link: https://lore.kernel.org/r/20210301171821.3427-4-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calls to lpfc_find_vport_by_vpid() for the highest indexed vport fails with
error, "2936 Could not find Vport mapped to vpi XXX". Our vport indices in
the loop and if-clauses were off by one.
Correct the vpid range used for vpi lookup to include the highest possible
vpid.
Link: https://lore.kernel.org/r/20210301171821.3427-3-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The wqe_dbde field indicates whether a Data BDE is present in Words 0:2 and
should therefore should be clear in the abts request wqe. By setting the
bit we can be misleading fw into error cases.
Clear the wqe_dbde field.
Link: https://lore.kernel.org/r/20210301171821.3427-2-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In some cases, sdebug_defer::cmpl_ts (completion timestamp) wasn't being
properly set when REQ_HIPRI was given. Fix that and improve code to only
call ktime_get_boottime_ns() for commands with REQ_HIPRI set as cmpl_ts is
only used in that case.
Link: https://lore.kernel.org/r/20210304014107.307625-1-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hctx->driver_data is not set for SCSI currently. Set hctx->driver_data =
shost.
Link: https://lore.kernel.org/r/20210215074048.19424-6-kashyap.desai@broadcom.com
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new sdeb_defer_type enumeration: SDEB_DEFER_POLL for requests that
have REQ_HIPRI set in cmd_flags field. It is expected that these requests
will be polled via the mq_poll entry point which is driven by calls to
blk_poll() in the block layer. Therefore timer events are not 'wired up' in
the normal fashion.
There are still cases with short delays (e.g. < 10 microseconds) where by
the time the command response processing occurs, the delay is already
exceeded in which case the code calls scsi_done() directly. In such cases
there is no window for mq_poll() to be called.
Add 'mq_polls' counter that increments on each scsi_done() called via the
mq_poll entry point. Can be used to show (with 'cat
/proc/scsi/scsi_debug/<host_id>') that blk_poll() is causing completions
rather than some other mechanism.
Link: https://lore.kernel.org/r/20210215074048.19424-5-kashyap.desai@broadcom.com
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support of the mq_poll interface to scsi_debug. This feature
requires shared host tag support in kernel and driver.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210215074048.19424-4-kashyap.desai@broadcom.com
Cc: dgilbert@interlog.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement mq_poll interface support in megaraid_sas. This feature
requires shared host tag support in kernel and driver.
The driver can work in non-IRQ mode which means there will not be any MSI-x
vector associated for poll_queues. The MegaRAID hardware has a single
submission queue and multiple reply queues. However, using the shared host
tagset support will enable the driver to simulate multiple hardware queues.
Change driver to allocate some extra reply queues which will be marked as
poll_queues. These poll_queues will not have associated MSI-x vectors. All
I/O completions on these queues will be done through the IOPOLL interface.
megaraid_sas with 8 poll_queues and using the io_uring hiprio=1 setting can
reach 3.2M IOPS with zero interrupts generated by the hardware.
The IOPOLL feature can be enabled using module parameter poll_queues.
Link: https://lore.kernel.org/r/20210215074048.19424-3-kashyap.desai@broadcom.com
Cc: sumit.saxena@broadcom.com
Cc: chandrakanth.patil@broadcom.com
Cc: linux-block@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_submit_cmd() is now only for simple drivers that do their
own sync during shutdown and do not use target_stop_session().
tcm_qla2xxx uses target_stop_session() to sync session shutdown with LIO
core, so we use target_init_cmd()/target_submit_prep()/target_submit(),
because target_init_cmd() will detect the target_stop_session() call and
return an error.
Link: https://lore.kernel.org/r/20210227170006.5077-8-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_submit_cmd() is now only for simple drivers that do their own sync
during shutdown and do not use target_stop_session(). It will never return
a failure, so we can remove that code from the driver.
Link: https://lore.kernel.org/r/20210227170006.5077-7-michael.christie@oracle.com
Cc: Michael Cyr <mikecyr@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SCSI currently uses an atomic variable to track queue depth for each
attached device. The queue depth depends on many factors such as transport
type and device implementation. In addition, the SCSI device queue depth is
not a static entity but changes over time as a result of congestion
management.
While blk-mq currently tracks queue depth for each hctx, it can't easily be
changed to accommodate the SCSI per-device requirement.
The current approach of using an atomic variable doesn't scale well when
there are lots of CPU cores and the disk is very fast. IOPS can be
substantially impacted by the atomic in the hot path.
Replace the atomic variable sdev->device_busy with an sbitmap for tracking
the SCSI device queue depth.
It has been observed that IOPS is improved ~30% by this patchset in the
following test:
1) test machine(32 logical CPU cores)
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz
2) setup scsi_debug:
modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256
3) fio script:
fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \
--numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \
--loops=10000 --name=job1 --filename=/dev/sdN
[mkp: fix device_busy reference in mpt3sas]
Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com
Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Limit SCSI device's queue depth to max(host->can_queue, 1024) in
scsi_change_queue_depth(). 1024 is big enough for saturating current fast
SCSI LUN(SSD or RAID volume on multiple SSDs). Also single hardware queue
depth is usually enough for saturating single LUN because per-core
performance is often considered in storage design.
This patch is needed for replacing sdev->device_busy with sbitmap which has
to be pre-allocated with reasonable max depth.
Link: https://lore.kernel.org/r/20210122023317.687987-13-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use local tracking of per-sdev outstanding command since sdev_busy in SCSI
mid layer is improved for performance reason using sbitmap (earlier it was
atomic variable).
Link: https://lore.kernel.org/r/20210122023317.687987-11-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SCSI uses a global atomic variable to track queue depth for each
LUN/request queue.
This doesn't scale well when there are lots of CPU cores and the disk is
very fast. It has been observed that IOPS is affected a lot by tracking
queue depth via sdev->device_busy in the I/O path.
Return budget token from .get_budget callback. The budget token can be
passed to driver so that we can replace the atomic variable with
sbitmap_queue and alleviate the scaling problems that way.
Link: https://lore.kernel.org/r/20210122023317.687987-9-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since SCSI is the only driver which requires dispatch budget move the token
from struct request to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20210122023317.687987-8-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An enabled user-specified exception event that does not clear quickly will
repeatedly cause the handler to run. That could unduly disturb the driver
behaviour being tested or debugged. To prevent that add debugfs file
exception_event_rate_limit_ms. When a exception event happens, it is
disabled, and then after a period of time (default 20ms) the exception
event is enabled again.
Note that if the driver also has that exception event enabled, it will not
be disabled.
Link: https://lore.kernel.org/r/20210209062437.6954-5-adrian.hunter@intel.com
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow users to enable specific exception events via debugfs.
The bits enabled by the driver ee_drv_ctrl are separated from the bits
enabled by the user ee_usr_ctrl. The control mask ee_mask_ctrl is the
logical-or of those two. A mutex is needed to ensure that the masks match
what was written to the device.
Link: https://lore.kernel.org/r/20210209062437.6954-4-adrian.hunter@intel.com
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For readability and completeness, add exception event definitions.
Link: https://lore.kernel.org/r/20210209062437.6954-3-adrian.hunter@intel.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, exception event status can be read from wExceptionEventStatus
attribute (sysfs file attributes/exception_event_status under the UFS host
controller device directory). Polling that attribute to track UFS exception
events is impractical, so add a tracepoint to track exception events for
testing and debugging purposes.
Note, by the time the exception event status is read, the exception event
may have cleared, so the value can be zero - see example below.
Note also, only enabled exception events can be reported. A subsequent
patch adds the ability for users to enable selected exception events via
debugfs.
Example with driver instrumented to enable all exception events:
# echo 1 > /sys/kernel/debug/tracing/events/ufs/ufshcd_exception_event/enable
... do some I/O ...
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 3/3 #P:5
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
kworker/2:2-173 [002] .... 731.486419: ufshcd_exception_event: 0000:00:12.5: status 0x0
kworker/2:2-173 [002] .... 732.608918: ufshcd_exception_event: 0000:00:12.5: status 0x4
kworker/2:2-173 [002] .... 732.609312: ufshcd_exception_event: 0000:00:12.5: status 0x4
Link: https://lore.kernel.org/r/20210209062437.6954-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a few driver updates (iscsi, mpt3sas) that were still in the
staging queue when the merge window opened (all committed on or before
8 Feb) and some small bug fixes which came in during the merge window
(all committed on 22 Feb).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYDvKnSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXtMAQDsmEay
V/GLOBE3lvURgUz/AANItBVQ+RTbo+3r25Q7PAEA/zqxVW3NitlJPzLA/MkWQ7p6
gnfxL088xAtZr24sdHA=
=whGs
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a few driver updates (iscsi, mpt3sas) that were still in the
staging queue when the merge window opened (all committed on or before
8 Feb) and some small bug fixes which came in during the merge window
(all committed on 22 Feb)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
scsi: hpsa: Correct dev cmds outstanding for retried cmds
scsi: sd: Fix Opal support
scsi: target: tcmu: Fix memory leak caused by wrong uio usage
scsi: target: tcmu: Move some functions without code change
scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t
scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
scsi: ufs: Fix a duplicate dev quirk number
scsi: aic79xx: Fix spelling of version
scsi: target: core: Prevent underflow for service actions
scsi: target: core: Add cmd length set before cmd complete
scsi: iscsi: Drop session lock in iscsi_session_chkready()
scsi: qla4xxx: Use iscsi_is_session_online()
scsi: libiscsi: Reset max/exp cmdsn during recovery
scsi: iscsi_tcp: Fix shost can_queue initialization
scsi: libiscsi: Add helper to calculate max SCSI cmds per session
scsi: libiscsi: Fix iSCSI host workq destruction
scsi: libiscsi: Fix iscsi_task use after free()
scsi: libiscsi: Drop taskqueuelock
scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
...
Prevent incrementing device->commands_outstanding for ioaccel command
retries that are driver initiated. If the command goes through the retry
path, the device->commands_outstanding counter has already accounted for
the number of commands outstanding to the device. Only commands going
through function hpsa_cmd_resolve_events decrement this counter.
- ioaccel commands go to either HBA disks or to logical volumes comprised
of SSDs.
The extra increment is causing device resets to hang.
- Resets wait for all device outstanding commands to complete before
returning.
Replace unused field abort_pending with retry_pending. This is a
maintenance driver so these changes have the least impact/risk.
Link: https://lore.kernel.org/r/161342801747.29388.13045495968308188518.stgit@brunhilda
Tested-by: Joe Szczypek <jszczype@redhat.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI core has been modified recently such that it only processes PM
requests if rpm_status != RPM_ACTIVE. Since some Opal requests are
submitted while rpm_status != RPM_ACTIVE, set flag RQF_PM for Opal
requests.
See also https://bugzilla.kernel.org/show_bug.cgi?id=211227.
[mkp: updated sha for PM patch]
Link: https://lore.kernel.org/r/20210222021042.3534-1-bvanassche@acm.org
Fixes: d80210f25f ("sd: add support for TCG OPAL self encrypting disks")
Fixes: e6044f714b ("scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE")
Cc: chriscjsus@yahoo.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Reported-by: chriscjsus@yahoo.com
Tested-by: chriscjsus@yahoo.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan reported we're passing in GFP_NOIO to kvmalloc() which will then
fallback to doing kmalloc() instead of an optional vmalloc() if the size
exceeds kmalloc()s limits. This will break with drives that have zone
numbers exceeding PAGE_SIZE/sizeof(u32).
Instead of passing in GFP_NOIO, enter an implicit GFP_NOIO allocation
scope.
Link: https://lore.kernel.org/r/YCuvSfKw4qEQBr/t@mwanda
Link: https://lore.kernel.org/r/5a6345e2989fd06c049ac4e4627f6acb492c15b8.1613569821.git.johannes.thumshirn@wdc.com
Fixes: 5795eb4430: ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CNIC depends on MMU, but since 'select' does not follow any dependency
chains, SCSI_BNX2X_FCOE also needs to depend on MMU, so that erroneous
configs are not generated, which cause build errors in cnic.
WARNING: unmet direct dependencies detected for CNIC
Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && MMU [=n]
Selected by [y]:
- SCSI_BNX2X_FCOE [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && LIBFC [=y] && LIBFCOE [=y]
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L154':
cnic.c:(.text+0x1094): undefined reference to `uio_event_notify'
riscv64-linux-ld: cnic.c:(.text+0x10bc): undefined reference to `uio_event_notify'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L1442':
cnic.c:(.text+0x96a8): undefined reference to `__uio_register_device'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L0 ':
cnic.c:(.text.unlikely+0x68): undefined reference to `uio_unregister_device'
Link: https://lore.kernel.org/r/20210213192428.22537-1-rdunlap@infradead.org
Fixes: 853e2bd210 ("[SCSI] bnx2fc: Broadcom FCoE offload driver")
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Javed Hasan <jhasan@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: 2b2bfc8aa5 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Link: https://lore.kernel.org/r/20210211104638.292499-1-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere). The
only big major rework of note is the one from Hannes trying to clean
up our result handling code in the drivers to make it consistent.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYDAdliYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTblAQCk6wD8
fcb4TItSRp0DpRzs37zhppEbrBgveuAFHhr5swEA0gL2mHcq0vnyNBinCLnERrE7
TPYJqUKJNktnjVG7ZWc=
=wW6p
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere).
The only big major rework of note is the one from Hannes trying to
clean up our result handling code in the drivers to make it
consistent"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
scsi: ufs: Give clk scaling min gear a value
scsi: lpfc: Fix 'physical' typos
scsi: megaraid_mbox: Fix spelling of 'allocated'
scsi: qla2xxx: Simplify the calculation of variables
scsi: message: fusion: Fix 'physical' typos
scsi: target: core: Change ASCQ for residual write
scsi: target: core: Signal WRITE residuals
scsi: target: core: Set residuals for 4Kn devices
scsi: hisi_sas: Add trace FIFO debugfs support
scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
scsi: hisi_sas: Enable debugfs support by default
scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
scsi: lpfc: Add auto select on IRQ_POLL
scsi: ncr53c8xx: Fix typos
scsi: lpfc: Fix ancient double free
scsi: qla2xxx: Fix some memory corruption
scsi: qla2xxx: Remove redundant NULL check
scsi: megaraid: Fix ifnullfree.cocci warnings
...
- Add support for eMMC inline encryption
- Add a helper function to parse DT properties for clock phases
- Some improvements and cleanups for the mmc_test module
MMC host:
- android-goldfish: Remove driver
- cqhci: Add support for eMMC inline encryption
- dw_mmc-zx: Remove driver
- meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED
- mmci: Add support for probing bus voltage level translator
- mtk-sd: Address race condition for request timeouts
- sdhci_am654: Add Support for the variant on TI's AM64 SoC
- sdhci-esdhc-imx: Prevent kernel panic at ->remove()
- sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4
- sdhci-msm: Add Inline Crypto Engine support
- sdhci-msm: Use actual_clock to improve timeout calculations
- sdhci-of-aspeed: Add Andrew Jeffery as maintainer
- sdhci-of-aspeed: Extend clock support for the AST2600 variant
- sdhci-pci-gli: Increase idle period for low power state for GL9763E
- sdhci-pci-o2micro: Make tuning for SDR104 HW more robust
- sdhci-sirf: Remove driver
- sdhci-xenon: Add support for the AP807 variant
- sunxi-mmc: Add support for the A100 variant
- sunxi-mmc: Ensure host is suspended during system sleep
- tmio: Add detection of data timeout errors
- tmio/renesas_sdhi: Extend support for retuning
- renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops
-----BEGIN PGP SIGNATURE-----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=rwB7
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for eMMC inline encryption
- Add a helper function to parse DT properties for clock phases
- Some improvements and cleanups for the mmc_test module
MMC host:
- android-goldfish: Remove driver
- cqhci: Add support for eMMC inline encryption
- dw_mmc-zx: Remove driver
- meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED
- mmci: Add support for probing bus voltage level translator
- mtk-sd: Address race condition for request timeouts
- sdhci_am654: Add Support for the variant on TI's AM64 SoC
- sdhci-esdhc-imx: Prevent kernel panic at ->remove()
- sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4
- sdhci-msm: Add Inline Crypto Engine support
- sdhci-msm: Use actual_clock to improve timeout calculations
- sdhci-of-aspeed: Add Andrew Jeffery as maintainer
- sdhci-of-aspeed: Extend clock support for the AST2600 variant
- sdhci-pci-gli: Increase idle period for low power state for GL9763E
- sdhci-pci-o2micro: Make tuning for SDR104 HW more robust
- sdhci-sirf: Remove driver
- sdhci-xenon: Add support for the AP807 variant
- sunxi-mmc: Add support for the A100 variant
- sunxi-mmc: Ensure host is suspended during system sleep
- tmio: Add detection of data timeout errors
- tmio/renesas_sdhi: Extend support for retuning
- renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops"
* tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: sdhci-esdhc-imx: fix kernel panic when remove module
mmc: host: Retire MMC_GOLDFISH
mmc: cb710: Use new tasklet API
mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
mmc: mmc_test: use erase_arg for mmc_erase command
mmc: wbsd: Use new tasklet API
mmc: via-sdmmc: Use new tasklet API
mmc: uniphier-sd: Use new tasklet API
mmc: tifm_sd: Use new tasklet API
mmc: s3cmci: Use new tasklet API
mmc: omap: Use new tasklet API
mmc: dw_mmc: Use new tasklet API
mmc: au1xmmc: Use new tasklet API
mmc: atmel-mci: Use new tasklet API
mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ
mmc: queue: Remove unused define
mmc: core: Drop redundant bouncesz from struct mmc_card
mmc: core: Drop redundant member in struct mmc host
mmc: core: Use host instead of card argument to mmc_spi_send_csd()
mmc: core: Exclude unnecessary header file
...
A relatively calm release at this time, and no massive code changes
are found in the stats, while a wide range of code refactoring and
cleanup have been done.
Note that this update includes the tree-wide trivial changes for
dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
* ALSA Core:
- Support for the software jack injection via debugfs
- Fixes for sync_stop PCM operations
* HD-audio and USB-audio:
- A few usual HD-audio device quirks
- Updates for Tegra HD-audio
- More quirks for Pioneer and other USB-audio devices
- Stricter state checks at USB-audio disconnection
* ASoC:
- Continued code refactoring, cleanup and fixes in ASoC core API
- A KUnit testsuite for the topology code
- Lots of ASoC Intel driver Realtek codec updates, quirk additions and
fixes
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
* Others:
- Drop return value from ISA driver remove callback
- Cleanup with DIV_ROUND_UP() macro
- FireWire updates, HDSP output loopback support
-----BEGIN PGP SIGNATURE-----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=QgvS
-----END PGP SIGNATURE-----
Merge tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A relatively calm release at this time, and no massive code changes
are found in the stats, while a wide range of code refactoring and
cleanup have been done.
Note that this update includes the tree-wide trivial changes for
dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
ALSA Core:
- Support for the software jack injection via debugfs
- Fixes for sync_stop PCM operations
HD-audio and USB-audio:
- A few usual HD-audio device quirks
- Updates for Tegra HD-audio
- More quirks for Pioneer and other USB-audio devices
- Stricter state checks at USB-audio disconnection
ASoC:
- Continued code refactoring, cleanup and fixes in ASoC core API
- A KUnit testsuite for the topology code
- Lots of ASoC Intel driver Realtek codec updates, quirk additions
and fixes
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
Others:
- Drop return value from ISA driver remove callback
- Cleanup with DIV_ROUND_UP() macro
- FireWire updates, HDSP output loopback support"
* tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits)
ALSA: hda: intel-dsp-config: add Alder Lake support
ASoC: soc-pcm: fix hw param limits calculation for multi-DAI
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: soc-pcm: fix hwparams min/max init for dpcm
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10
ALSA: hda: Add another CometLake-H PCI ID
ASoC: soc-pcm: add soc_pcm_hw_update_format()
ASoC: soc-pcm: add soc_pcm_hw_update_chan()
ASoC: soc-pcm: add soc_pcm_hw_update_rate()
ASoC: wm_adsp: Remove unused control callback structure
ASoC: SOF: relax ABI checks and avoid unnecessary warnings
ASoC: codecs: lpass-tx-macro: add dapm widgets and route
ASoC: codecs: lpass-tx-macro: add support for lpass tx macro
ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec
ASoC: codecs: lpass-rx-macro: add iir widgets
ASoC: codecs: lpass-rx-macro: add dapm widgets and route
...
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAtZ7cACgkQJNaLcl1U
h9DD5Af/eeERQ2uVOqtw0If+XL1xRYe6RewgDoNcO/l/5WxBLrBH6NbEf0OwNJeg
vzZAkUBtxmx6XiW2M/h+4ucW1OPcg5IzxIWTHfGDMlKIxzb0jgWugRnJ7sdTnOs3
c+QHnvuOT7QzZBviAIkc5uZ5thAImYF8zDyKoGF5llztmnBYymtgpnvnRNZGM0ou
76oUzSvkCFI2b0Yf6bpGok2nBVlOu82HSHOUKjXVWk+LAeiivlYGOEZpdIKEe3S8
u6atQJ29XRr52Yuc2z4xnFQTW1cIDlwj2Fk5x/z8hX+5nRhNSGuIv1l5m7TfBj3e
mCO9cltKZxly0NXysgekn95JHwwwkA==
=MJSb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
For host-aware ZBC disk, setting the device zoned model to BLK_ZONED_HA
using blk_queue_set_zoned() in sd_read_block_characteristics() may
result in the block device effective zoned model to be "none"
(BLK_ZONED_NONE) if partitions are present on the device. In this case,
sd_zbc_read_zones() should not setup the zone related queue limits for
the disk so that the device limits and configuration is consistent with
a regular disk and resources not uselessly allocated (e.g. the zone
write pointer tracking array for zone append emulation).
Furthermore, if the disk zoned model changes at run time due to the
creation of a partition by the user, the zone related resources can be
released.
Fix both problems by introducing the function sd_zbc_clear_zone_info()
to reset the scsi disk zone information and free resources and by
returning early in sd_zbc_read_zones() for a block device that has a
zoned model equal to BLK_ZONED_NONE.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Per ZBC and ZAC specifications, host-managed SMR hard-disks mandate that
all writes into sequential write required zones be aligned to the device
physical block size. However, NVMe ZNS does not have this constraint and
allows write operations into sequential zones to be aligned to the
device logical block size. This inconsistency does not help with
software portability across device types.
To solve this, introduce the zone_write_granularity queue limit to
indicate the alignment constraint, in bytes, of write operations into
zones of a zoned block device. This new limit is exported as a
read-only sysfs queue attribute and the helper
blk_queue_zone_write_granularity() introduced for drivers to set this
limit.
The function blk_queue_set_zoned() is modified to set this new limit to
the device logical block size by default. NVMe ZNS devices as well as
zoned nullb devices use this default value as is. The scsi disk driver
is modified to execute the blk_queue_zone_write_granularity() helper to
set the zone write granularity of host-managed SMR disks to the disk
physical block size.
The accessor functions queue_zone_write_granularity() and
bdev_zone_write_granularity() are also introduced.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The session lock in iscsi_session_chkready() is not needed because when we
transition from logged into to another state we will block and/or remove
the devices under the session, so no new I/O will be sent to the drivers
after the block/remove. I/O that races with the block/removal is cleaned up
by the drivers when it handles all outstanding I/O, so this just added an
extra lock in the main I/O path. This patch removes the lock like other
transport classes.
Link: https://lore.kernel.org/r/20210207044608.27585-10-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
__qla4xxx_is_chap_active() just wants to know if a session is online and
does not care about why it's not, so this has it use
iscsi_is_session_online().
This is not a bug now, but the next patch changes the behavior of
iscsi_session_chkready() so this patch just prepares the driver for that
change.
Link: https://lore.kernel.org/r/20210207044608.27585-9-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we lose the session then relogin, but the new cmdsn window has shrunk
(due to something like an admin changing a setting) we will have the old
exp/max_cmdsn values and will never be able to update them. For example,
max_cmdsn would be 64, but if on the target the user set the window to be
smaller then the target could try to return the max_cmdsn as 32. We will
see that new max_cmdsn in the rsp but because it's lower than the old
max_cmdsn when the window was larger we will not update it.
So this patch has us reset the window values during session cleanup so they
can be updated after a new login.
Link: https://lore.kernel.org/r/20210207044608.27585-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We are setting the shost's can_queue after we add the host which is too
late, because the SCSI midlayer will have allocated the tag set based on
the can_queue value at that time. This patch has us use the
iscsi_host_get_max_scsi_cmds() helper to figure out the number of SCSI
cmds.
It also fixes up the template can_queue so it reflects the max SCSI cmds we
can support like how other drivers work.
Link: https://lore.kernel.org/r/20210207044608.27585-7-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch just breaks out the code that calculates the number of SCSI cmds
that will be used for a SCSI session. It also adds a check that we don't go
over the host's can_queue value.
Link: https://lore.kernel.org/r/20210207044608.27585-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We allocate the iSCSI host workq in iscsi_host_alloc() so iscsi_host_free()
should do the destruction. Drivers can then do their error/goto handling
and call iscsi_host_free() to clean up what has been allocated in
iscsi_host_alloc().
Link: https://lore.kernel.org/r/20210207044608.27585-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following bug was reported and debugged by wubo40@huawei.com:
When testing kernel 4.18 version, NULL pointer dereference problem occurs
in iscsi_eh_cmd_timed_out() function.
I think this bug in the upstream is still exists.
The analysis reasons are as follows:
1) For some reason, I/O command did not complete within the timeout
period. The block layer timer works, call scsi_times_out() to handle I/O
timeout logic. At the same time the command just completes.
2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic.
Although there is an NULL judgment for the task, the task has not been
released yet now.
3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count
reaches zero, the conditions for free task is met, then
iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After
iscsi_eh_cmd_timed_out() passes the task judgment check, there can still
be NULL dereference scenarios.
CPU0 CPU3
|- scsi_times_out() |-
iscsi_complete_task()
| |
|- iscsi_eh_cmd_timed_out() |-
__iscsi_put_task()
| |
|- task=sc->SCp.ptr, task is not NUL, check passed |-
iscsi_free_task(task)
| |
| |-> sc->SCp.ptr
= NULL
| |
|- task is NULL now, NULL pointer dereference |
| |
\|/ \|/
Calltrace:
[380751.840862] BUG: unable to handle kernel NULL pointer dereference at
0000000000000138
[380751.843709] PGD 0 P4D 0
[380751.844770] Oops: 0000 [#1] SMP PTI
[380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded
Tainted: G
[380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[380751.856521] Workqueue: kblockd blk_mq_timeout_work
[380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi]
[380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85
c9 74 2c 48 39 d5 74
[380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246
[380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX:
0000000116acc580
[380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI:
ffff9fd1e4d6d420
[380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09:
0000000116acc580
[380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff9fd1e6e931e8
[380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15:
0000000000000003
[380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000)
knlGS:0000000000000000
[380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4:
00000000003606f0
[380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[380751.893738] Call Trace:
[380751.894639] scsi_times_out+0x60/0x1c0
[380751.895861] blk_mq_check_expired+0x144/0x200
[380751.897302] ? __switch_to_asm+0x35/0x70
[380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0
[380751.900091] ? __blk_mq_requeue_request+0x100/0x100
[380751.901611] ? __switch_to_asm+0x41/0x70
[380751.902853] ? __blk_mq_requeue_request+0x100/0x100
[380751.904398] blk_mq_timeout_work+0x54/0x130
[380751.905740] process_one_work+0x195/0x390
[380751.907228] worker_thread+0x30/0x390
[380751.908713] ? process_one_work+0x390/0x390
[380751.910350] kthread+0x10d/0x130
[380751.911470] ? kthread_flush_work_fn+0x10/0x10
[380751.913007] ret_from_fork+0x35/0x40
crash> dis -l iscsi_eh_cmd_timed_out+0x15e
xxxxx/drivers/scsi/libiscsi.c: 2062
1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd
*sc)
{
...
1984 spin_lock_bh(&session->frwd_lock);
1985 task = (struct iscsi_task *)sc->SCp.ptr;
1986 if (!task) {
1987 /*
1988 * Raced with completion. Blk layer has taken
ownership
1989 * so let timeout code complete it now.
1990 */
1991 rc = BLK_EH_DONE;
1992 goto done;
1993 }
...
2052 for (i = 0; i < conn->session->cmds_max; i++) {
2053 running_task = conn->session->cmds[i];
2054 if (!running_task->sc || running_task == task ||
2055 running_task->state != ISCSI_TASK_RUNNING)
2056 continue;
2057
2058 /*
2059 * Only check if cmds started before this one have
made
2060 * progress, or this could never fail
2061 */
2062 if (time_after(running_task->sc->jiffies_at_alloc,
2063 task->sc->jiffies_at_alloc)) <---
2064 continue;
2065
...
}
carsh> struct scsi_cmnd ffff9fd1e6e931e8
struct scsi_cmnd {
...
SCp = {
ptr = 0x0, <--- iscsi_task
this_residual = 0,
...
},
}
To prevent this, we take a ref to the cmd under the back (completion) lock
so if the completion side were to call iscsi_complete_task() on the task
while the timer/eh paths are not holding the back_lock it will not be freed
from under us.
Note that this requires the previous patch, "scsi: libiscsi: Drop
taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd
is aborted. If the EH/timer and completion path are racing we don't know
which path will do the last put. The previous patch moved the operations we
needed to do under the forward lock to cleanup_queued_task. Once that has
run we can drop the forward lock for the cmd and bnx2i no longer has to
worry about if the EH, timer or completion path did the ast put and if the
forward lock is held or not since it won't be.
Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com
Reported-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The purpose of the taskqueuelock was to handle the issue where a bad target
decides to send a R2T and before its data has been sent decides to send a
cmd response to complete the cmd. The following patches fix up the
frwd/back locks so they are taken from the queue/xmit (frwd) and completion
(back) paths again. To get there this patch removes the taskqueuelock which
for iSCSI xmit wq based drivers was taken in the queue, xmit and completion
paths.
Instead of the lock, we just make sure we have a ref to the task when we
queue a R2T, and then we always remove the task from the requeue list in
the xmit path or the forced cleanup paths.
Link: https://lore.kernel.org/r/20210207044608.27585-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue,
but we leave it partially setup. We don't have functions that can undo the
pdu and init task setup. We only have cleanup_task which can clean up both
parts. So this has us just fail the cmd and go through the standard cleanup
routine and then have the SCSI midlayer retry it like is done when it fails
in the queuecommand path.
Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch removes unneeded return variables. It fixes the following
warning detected by coccinelle:
./drivers/scsi/isci/request.c:1483:17-23: Unneeded variable: "status".
Return "SCI_SUCCESS" on line 1503
./drivers/scsi/isci/request.c:2157:17-23: Unneeded variable: "status".
Return "SCI_SUCCESS" on line 2177
Link: https://lore.kernel.org/r/1612424915-106608-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print event counter after dumping the event history.
Link: https://lore.kernel.org/r/20210203101443.28934-1-dh0421.hwang@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: DooHyun Hwang <dh0421.hwang@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_target.c:984:12-14: WARNING !A || A && B is
equivalent to !A || B.
Link: https://lore.kernel.org/r/1612319190-111421-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a host trace buffer is released, applications never know for what
reason the buffer is released. Add a new IOCTL MPT3ADDNLDIAGQUERY to
provide the trigger information due to which the diag buffer is released.
Link: https://lore.kernel.org/r/20210204033724.1345-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MPT Fusion adapters can steer completions to individual queues and we now
have support for shared host-wide tags in the I/O stack. The addition of
the host-wide tags allows us to enable multiqueue support for MPT Fusion
adapters. Once host-wise tags are enabled, the CPU hotplug feature is also
supported.
Allow use of host-wide tags to be disabled through the "host_tagset_enable"
module parameter. Once we do not have any major performance regressions
using host-wide tags, we will drop the hand-crafted interrupt affinity
settings.
Performance is meeting expectations. About 3.1M IOPS using 24 Drive SSD on
Aero controllers.
Link: https://lore.kernel.org/r/20210202095832.23072-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the driver allocates memory for ReplyPostFree queues in chunks of
16. In resource constrained environments--such as VM with 1 GB RAM and 2
CPUs--memory allocation for ReplyPostFree pools may fail because the driver
tries to allocate a memory for 16 ReplyPostFree queues even though the
actual number needed is 2.
Change the driver to allocate memory for only the actual number of queues
needed if the ReplyPostFree queue count is less than 16.
Link: https://lore.kernel.org/r/20210201141522.25363-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building with 'make W=1' enables -Wpacked-not-aligned, and this warns about
pmcraid because of incompatible alignment constraints for
pmcraid_passthrough_ioctl_buffer:
drivers/scsi/pmcraid.h:1044:1: warning: alignment 1 of 'struct pmcraid_passthrough_ioctl_buffer' is less than 32 [-Wpacked-not-aligned]
1044 | } __attribute__ ((packed));
| ^
drivers/scsi/pmcraid.h:1041:24: warning: 'ioarcb' offset 16 in 'struct pmcraid_passthrough_ioctl_buffer' isn't aligned to 32 [-Wpacked-not-aligned]
1041 | struct pmcraid_ioarcb ioarcb;
The inner structure is documented as having 32 byte alignment here, but is
starts at a 16 byte offset in the outer structure, so it's never actually
aligned, as the outer structure is also marked 'packed'.
Lee Jones point this out as one of the last files that need to be changed
before the warning can be enabled by default.
Change the annotations in a way that avoids the warning but leaves the
layout unchanged, by removing the packing on the inner structure and adding
it to the outer one. The one-byte request_buffer[] array should have been a
flexible array member here, which is how I change it to avoid extra padding
from the alignment attribute.
Link: https://lore.kernel.org/r/20210204163020.3286210-1-arnd@kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sd_probe(), print a warning if CONFIG_BLK_DEV_ZONED is disabled and a
TYPE_ZBC device is found. While at it, use IS_ENABLED() to test if
CONFIG_BLK_DEV_ZONED is enabled instead using of a #ifdef.
Link: https://lore.kernel.org/r/20210128055658.530133-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new resource-managed variant of blk_ksm_init() so that the UFS
driver doesn't have to manually call blk_ksm_destroy().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Link: https://lore.kernel.org/r/20210121082155.111333-3-ebiggers@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The initialization of clk_scaling.min_gear was removed by mistake. This
change adds it back, otherwise clock scaling down would fail.
Link: https://lore.kernel.org/r/1611802172-37802-1-git-send-email-cang@codeaurora.org
Fixes: 4543d9d782 ("scsi: ufs: Refactor ufshcd_init/exit_clk_scaling/gating()")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In testing, in a configuration with Redfish and native NVMe multipath when
an EEH is injected, a kernel oops is being encountered:
(unreliable)
lpfc_nvme_ls_req+0x328/0x720 [lpfc]
__nvme_fc_send_ls_req.constprop.13+0x1d8/0x3d0 [nvme_fc]
nvme_fc_create_association+0x224/0xd10 [nvme_fc]
nvme_fc_reset_ctrl_work+0x110/0x154 [nvme_fc]
process_one_work+0x304/0x5d
the NBMe transport is issuing a Disconnect LS request, which the driver
receives and tries to post but the work queue used by the driver is already
being torn down by the eeh.
Fix by validating the validity of the work queue before proceeding with the
LS transmit.
Link: https://lore.kernel.org/r/20210127221601.84878-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is
equivalent to !A || B.
Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller provides trace FIFO DFX tool to assist link fault debugging
and link optimization. This tool can be helpful when debugging link faults
without SAS analyzers. Each PHY has an independent trace FIFO interface.
The user can configure the trace FIFO tool of one PHY by using the
following six interfaces:
signal_sel: select signal group applies to different scenarios.
0x0: linkrate negotiation
0x1: Host 12G TX train
0x2: Disk 12G TX train
0x3: SAS PHY CTRL DFX 0
0x4: SAS PHY CTRL DFX 1
0x5: SAS PCS DFX
other: linkrate negotiation
dump_mask: The masked hardware status bit will not be updated.
dump_mode: determines how to dump data after trigger signal is generated.
0x0: dump forever
0x1: dump 32 data after trigger signal is generated
0x2: no more dump after trigger signal is generated
trigger_mode: determines the trigger mode, level or edge.
0x0: dump when trigger signal changed
0x1: dump when trigger signal's level equal to trigger_level
0x2: dump when trigger signal's level different from trigger_level
trigger_level: determines the trigger level.
trigger_msk: mask trigger signal
The user can get 32-byte values from hardware by reading the rd_data.
These values consitute the status record of the hardware at different time
points.
Link: https://lore.kernel.org/r/1611659068-131975-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the controller reset occurs at the same time as driver removal, it may
be possible that the interrupts have been released prior to the host
softreset, and calling pci_irq_vector() there causes a WARN:
WARNING: CPU: 37 PID: 1542 /pci/msi.c:1275 pci_irq_vector+0xc0/0xd0
Call trace:
pci_irq_vector+0xc0/0xd0
disable_host_v3_hw+0x58/0x5b0 [hisi_sas_v3_hw]
soft_reset_v3_hw+0x40/0xc0 [hisi_sas_v3_hw]
hisi_sas_controller_reset+0x150/0x260 [hisi_sas_main]
hisi_sas_rst_work_handler+0x3c/0x58 [hisi_sas_main]
To fix, flush the driver workqueue prior to releasing the interrupts to
ensure any resets have been completed.
Link: https://lore.kernel.org/r/1611659068-131975-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a config option to enable debugfs support by default. And if debugfs
support is enabled by default, dump count default value is increased to 50
as generally users want something bigger than the current default in that
situation.
Link: https://lore.kernel.org/r/1611659068-131975-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that v2 and v3 hw expose their HW queues (and so shost.nr_hw_queues is
set), remove the conditional checks in hisi_sas_task_prep().
This change would affect v1 HW performance (as it does not expose HW
queues), but nobody uses it and support may be dropped soon.
Link: https://lore.kernel.org/r/1611659068-131975-3-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The platform_get_irq() check for -EPROBE_DEFER was to ensure that all the
steps to add the SCSI host are not done and then only to realise that the
probe needs to be deferred.
However, since there is now an earlier check for this in
hisi_sas_interrupt_preinit(), this check is superfluous and may be removed.
Link: https://lore.kernel.org/r/1611659068-131975-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc depends on irq_poll library, but it is not selected automatically.
When irq_poll is not selected, compiling it can run into following error
ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined!
Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The patch to switch using SAM status values had some typos; fix them up.
Link: https://lore.kernel.org/r/20210125085415.70574-1-hare@suse.de
Fixes: 491152c7c3 ("scsi: ncr53c8xx: Use SAM status values")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "pmb" pointer is freed at the start of the function and then freed
again in the error handling code.
Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda
Fixes: 92d7f7b0cd ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was supposed to be "data" instead of "&data". The current code will
corrupt the stack.
Link: https://lore.kernel.org/r/YA6E0geUlL9Hs04A@mwanda
Fixes: dbf1f53cfd ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS core has received a substantial rework this cycle. This in
turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes
into 5.12/scsi-queue and resolve the conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix below warnings reported by coccicheck:
./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before
some freeing functions is not needed.
Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NULL check before vfree is not needed.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2012111113060.2669@hadrien
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since Linus Torvalds reinstated KERN_CONT in commit 4bcc595ccd ("printk:
reinstate KERN_CONT for printing continuation lines") in 2015, the qla1280
SCSI driver printed a rather ugly and screen real estate wasting multi-line
per device status glibberish during boot. Fix this by adding KERN_CONT as
needed.
Tested on my Sgi Octane: https://youtu.be/Lfqe1SYR2jk
Link: https://lore.kernel.org/r/20201210.223944.388095546873159172.rene@exactcode.com
Signed-off-by: René Rebe <rene@exactcode.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Delete ufshcd_wb_buf_flush_enable() and ufshcd_wb_buf_flush_disable(). Move
the implementation into ufshcd_wb_toggle_flush().
Link: https://lore.kernel.org/r/20210121185736.12471-1-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The list iterator can't be NULL so this check is not required. Removing
the check silences a Smatch warning about inconsistent NULL checking.
drivers/scsi/qla2xxx/qla_dfs.c:371 qla_dfs_tgt_counters_show()
error: we previously assumed 'fcport' could be null (see line 372)
Link: https://lore.kernel.org/r/YAkaaSrhn1mFqyHy@mwanda
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_isr.c:780:2-18: WARNING: Assignment
of 0/1 to bool variable.
Link: https://lore.kernel.org/r/1611127919-56551-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1
to bool variable
Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These variants were added for bisectability. Remove them, as all call sites
have now been convertd to use the original API.
Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-19-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-18-a.darwish@linutronix.de
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original event notifiers API, while still passing GFP
context. The _gfp() notifier variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-15-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-14-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All call-sites of below libsas APIs:
- sas_alloc_event()
- sas_notify_port_event()
- sas_notify_phy_event()
have been converted to use the _gfp()-suffixed version. Modify the
original APIs above to take a gfp_t flags parameter by default.
For bisectability, call-sites will be modified again to use the original
libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions
can then be removed.
Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Below are the context analysis for modified functions:
=> hisi_sas_bytes_dmaed():
Since it is invoked from both process and atomic contexts, let its callers
pass the gfp_t flags:
* hisi_sas_main.c:
------------------
hisi_sas_phyup_work(): workqueue context
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
hisi_sas_controller_reset_done(): has an msleep()
-> hisi_sas_rescan_topology()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
hisi_sas_debug_I_T_nexus_reset(): calls wait_for_completion_timeout()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
* hisi_sas_v1_hw.c:
-------------------
int_abnormal_v1_hw(): irq handler
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)
* hisi_sas_v[23]_hw.c:
----------------------
int_phy_updown_v[23]_hw(): irq handler
-> phy_down_v[23]_hw()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)
=> int_bcast_v1_hw() and phy_bcast_v3_hw():
Both are invoked exclusively from irq handlers. Pass GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210118100955.1761652-12-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Context analysis:
aic94xx_hwi.c: asd_dl_tasklet_handler()
-> asd_ascb::tasklet_complete()
== escb_tasklet_complete()
-> aic94xx_scb.c: asd_phy_event_tasklet()
-> aic94xx_scb.c: asd_bytes_dmaed_tasklet()
-> aic94xx_scb.c: asd_link_reset_err_tasklet()
-> aic94xx_scb.c: asd_primitive_rcvd_tasklet()
All functions are invoked by escb_tasklet_complete(), which is invoked by
the tasklet handler. Pass GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210118100955.1761652-11-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Call chain analysis, pm8001_hwi.c:
pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet()
-> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr()
-> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)]
-> process_one_iomb()
-> mpi_hw_event()
-> hw_event_sas_phy_up()
-> pm8001_bytes_dmaed()
-> hw_event_sata_phy_up
-> pm8001_bytes_dmaed()
All functions are invoked by process_one_iomb(), which is invoked by the
interrupt service routine and the tasklet handler. A similar call chain is
also found at pm80xx_hwi.c. Pass GFP_ATOMIC.
For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls
wait_for_completion() and msleep(). Pass GFP_KERNEL.
Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Context analysis:
- sas_enable_revalidation(): process, acquires mutex
- sas_resume_ha(): process, calls wait_event_timeout()
Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
