IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
According to:
https://github.com/intel/ipu6-drivers/blob/master/patch/int3472-support-independent-clock-and-LED-gpios-5.17%2B.patch
Bits 31-24 of the _DSM pin entry integer value codes the active-value,
that is the actual physical signal (0 or 1) which needs to be output on
the pin to turn the sensor chip on (to make it active).
So if bits 31-24 are 0 for a reset pin, then the actual value of the reset
pin needs to be 0 to take the chip out of reset. IOW in this case the reset
signal is active-high rather then the default active-low.
And if bits 31-24 are 0 for a clk-en pin then the actual value of the clk
pin needs to be 0 to enable the clk. So in this case the clk-en signal
is active-low rather then the default active-high.
IOW if bits 31-24 are 0 for a pin, then the default polarity of the pin
is inverted.
Add a check for this and also propagate this new polarity to the clock
registration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-6-hdegoede@redhat.com
Move the requesting of the clk-enable GPIO to skl_int3472_register_clock()
(and move the gpiod_put to unregister).
This mirrors the GPIO handling in skl_int3472_register_regulator() and
allows removing skl_int3472_map_gpio_to_clk() from discrete.c.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-5-hdegoede@redhat.com
On some systems, e.g. the Lenovo ThinkPad X1 Yoga gen 7 and the ThinkPad
X1 Nano gen 2 there is no clock-enable pin, triggering the:
"No clk GPIO. The privacy LED won't work" warning and causing the privacy
LED to not work.
Fix this by modeling the privacy LED as a LED class device rather then
integrating it with the registered clock.
Note this relies on media subsys changes to actually turn the LED on/off
when the sensor's v4l2_subdev's s_stream() operand gets called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-4-hdegoede@redhat.com
The discrete.c code is not the only code which needs to lookup the
acpi_device and device-name for the sensor for which the INT3472
ACPI-device is a GPIO/clk/regulator provider.
The tps68470.c code also needs this functionality, so factor this
out into a new get_sensor_adev_and_name() helper.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-9-hdegoede@redhat.com
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
