IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For MTL, when reading from HW, RP0, RP1 (actuall RPe) and RPn freq use an
entirely different set of registers with different fields, bitwidths and
units.
v2: Move MTL check into a separate function (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910143844.1755324-4-ashutosh.dixit@intel.com
When we hook up interrupts (in the next patch), interrupts for the media
GT are still processed as part of the primary GT's interrupt flow. As
such, we should share the same IRQ lock with the primary GT. Let's
convert gt->irq_lock into a pointer and just point the media GT's
instance at the same lock the primary GT is using.
v2:
- Point media's gt->irq_lock at the primary GT lock properly. (Daniele)
- Fix jump target for intel_root_gt_init_early errors. (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-14-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Specially in GT reset case this could be triggered and try
to disable things that had never been enabled. Let's add
some protection here.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902095126.373036-1-rodrigo.vivi@intel.com
We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.
v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
frequencies from the get_ia_constants instead of the fake init of
rps' min and max.
v3: don't forget the max <= min return
v4: Move all the freq conversion to intel_rps.c. And the max <= min
check to where it belongs.
v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
the "raw format"
Fixes: 7ba79a671568 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
Host Turbo operates at efficient frequency when GT is not idle unless
the user or workload has forced it to a higher level. Replicate the same
behavior in SLPC by allowing the algorithm to use efficient frequency.
We had disabled it during boot due to concerns that it might break
kernel ABI for min frequency. However, this is not the case since
SLPC will still abide by the (min,max) range limits.
With this change, min freq will be at efficient frequency level at init
instead of fused min (RPn). If user chooses to reduce min freq below the
efficient freq, we will turn off usage of efficient frequency and honor
the user request. When a higher value is written, it will get toggled
back again.
The patch also corrects the register which needs to be read for obtaining
the correct efficient frequency for Gen9+.
We see much better perf numbers with benchmarks like glmark2 with
efficient frequency usage enabled as expected.
v2: Address review comments (Rodrigo)
v3: with efficient frequency being dynamic, it is possible that the req
frequency may go beyond max freq. This will cause SLPC selftests to fail.
Add a FIXME there to start the test with [RPn, RP0] instead and restore
it afterwards.
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/5468
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820010832.15350-1-vinay.belgaumkar@intel.com
Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.
v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]
The SoC registers, including RP_STATE_CAP, have moved to a new location
in GTTMMADR on Ponte Vecchio. We need to update the register offset
accordingly.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-5-matthew.d.roper@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdfae ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.
v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com
Throttling here refers to the GT frequency being clipped. Each of
the throttle reason attributes will have a 0 or 1 value depending
upon whether there is throttling and also the specific reason for
it.
The following is a brief description of the sysfs throttle
frequency attributes added:
- throttle_reason_status: when set indicates that there is GT
frequency clipping.
- throttle_reason_pl1: when set indicates that PBM PL1 (platform
or package PL1) has caused GT frequency clipping.
- throttle_reason_pl2: when set indicates that PBM PL2 or PL3
(platform or package PL2 or PL3) has caused GT frequency
clipping.
- throttle_reason_pl4: when set indicates that PL4 or IccMax has
caused GT frequency clipping.
- throttle_reason_thermal: when set indicates that Thermal event
has caused GT frequency clipping.
- throttle_reason_prochot: when set indicates that PROCHOT# has
caused GT frequency clipping.
- throttle_reason_ratl: when set indicates that Running Average
Thermal Limit has caused GT frequency clipping.
- throttle_reason_vr_thermalert: when set indicates that Hot VR
(any processor VR) has caused GT frequency clipping.
- throttle_reason_vr_tdc: when set indicates that VR TDC
(Thermal Design Current) has caused GT frequency clipping.
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Dale B Stimson <dale.b.stimson@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-8-andi.shyti@linux.intel.com
Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
TGL+ and newer platforms don't support RPS up and low interruption
limits.
It is not used for broadwell and newer plaforms that supports
execlist but here making sure that it is explicit not used even in
debug scenarios.
BSpec: 33301
BSpec: 52069
BSpec: 9520
HSD: 1405911647
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218210330.48653-1-jose.souza@intel.com
Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.
For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):
* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000
v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.
Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com
This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.
v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
By default, GT (and GuC) run at RPn. Requesting for RP0
before firmware load can speed up DMA and HuC auth as well.
In addition to writing to 0xA008, we also need to enable
swreq in 0xA024 so that Punit will pay heed to our request.
SLPC will restore the frequency back to RPn after initialization,
but we need to manually do that for the non-SLPC path.
We don't need a manual override in the SLPC disabled case, just
use the intel_rps_set function to ensure consistent RPS state.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216233022.21351-1-vinay.belgaumkar@intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-5-andi.shyti@linux.intel.com
Add a helper to sort through the SLPC/RPS paths of get/set methods.
Boost frequency will be modified as long as it is within the constraints
of RP0 and if it is different from the existing one. We will set min
freq to boost only if there is at least one active waiter.
v2: Add num_boosts to guc_slpc_info and changes for worker function
v3: Review comments (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-4-vinay.belgaumkar@intel.com
Add helper in RPS code for handling SLPC and non-SLPC paths.
When boost is requested in the SLPC path, we can ask GuC to ramp
up the frequency req by setting the minimum frequency to boost freq.
Reset freq back to the min softlimit when there are no more waiters.
v2: Schedule a worker thread which can boost freq from within
an interrupt context as well.
v3: No need to check against requested freq before scheduling boost
work (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-3-vinay.belgaumkar@intel.com
The snb+ pcode mailbox code is not sideband, so split it out to a
separate file. As can be seen from the #include changes, very few places
use both sideband and pcode.
Code movement only.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/185deb18eb739e5ae019e27834b9997dcc1347bc.1634207064.git.jani.nikula@intel.com
The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].
Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com
In commit 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement
for intel_rps_boost()"), we decoupled the rps worker from the pm so
that we could avoid the synchronization penalty which makes the
assertion liable to run too early. Which makes warning invalid hence
removed.
Fixes: 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Seeing these errors when GT is likely in suspend state-
"RPM wakelock ref not held during HW access"
Ensure GT is awake before trying to access HW registers. Avoid
reading the register if that is not the case.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: 41e5c17ebfc2 ("drm/i915/guc/slpc: Sysfs hooks for SLPC")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907232704.12982-1-vinay.belgaumkar@intel.com
The RP_STATE_CAP register is no longer part of the MCHBAR on XEHPSDV; this
register is now a per-tile register at GTTMMADDR offset 0x250014.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-7-matthew.d.roper@intel.com
Tests that exercise the SLPC get/set frequency interfaces.
Clamp_max will set max frequency to multiple levels and check
that SLPC requests frequency lower than or equal to it.
Clamp_min will set min frequency to different levels and check
if SLPC requests are higher or equal to those levels.
v2: Address review comments (Michal W)
v3: Checkpatch() corrections
v4: Remove unnecessary header file (Matthew Brost)
v5: checkpatch() and define const for 50/3 (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-14-vinay.belgaumkar@intel.com
Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.
v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.
v3: Address review comments (Michal W)
v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com
Also ensure uc_init is called before we initialize RPS so that we
can check for SLPC support. We do not need to enable up/down
interrupts when SLPC is enabled. However, we still need the ARAT
interrupt, which will be enabled separately later.
v2: Explicitly return from intel_rps_enable with slpc check (Matthew B)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-3-vinay.belgaumkar@intel.com
The GuC can implement execution qunatums, detect hung contexts and
other such things but it requires the timer expired interrupt to do so.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-15-matthew.brost@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
The different submission backends each have their own preferred
behaviour and interrupt setup. Let each handle their own interrupts.
This becomes more useful later as we to extract the use of auxiliary
state in the interrupt handler that is backend specific.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521183215.65451-4-matthew.brost@intel.com
Since we use a flag within i915_request.flags to indicate when we have
boosted the request (so that we only apply the boost) once, this can be
used as the serialisation with i915_request_retire() to avoid having to
explicitly take the i915_request.lock which is more heavily contended.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201231093149.19086-1-chris@chris-wilson.co.uk
We treat idling the GT (intel_rps_park) as a downclock event, and reduce
the frequency we intend to restart the GT with. Since the two workloads
are likely related (e.g. a compositor rendering every 16ms), we want to
carry the frequency and load information from across the idling.
However, we do also need to update the frequencies so that workloads
that run for less than 1ms are autotuned by RPS (otherwise we leave
compositors running at max clocks, draining excess power). Conversely,
if we try to run too slowly, the next workload has to run longer. Since
there is a hysteresis in the power graph, below a certain frequency
running a short workload for longer consumes more energy than running it
slightly higher for less time. The exact balance point is unknown
beforehand, but measurements with 30fps media playback indicate that RPe
is a better choice.
Reported-by: Edward Baker <edward.baker@intel.com>
Tested-by: Edward Baker <edward.baker@intel.com>
Fixes: 043cd2d14ede ("drm/i915/gt: Leave rps->cur_freq on unpark")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124183521.28623-1-chris@chris-wilson.co.uk
The old IPS interface did not match the RPS interface that we tried to
plug it into (bool vs int return). Once repaired, our minimal
selftesting is finally happy!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121190352.15996-1-chris@chris-wilson.co.uk
Cross-subsystem Changes:
- DMA mapped scatterlist fixes in i915 to unblock merging of
https://lkml.org/lkml/2020/9/27/70 (Tvrtko, Tom)
Driver Changes:
- Fix for user reported issue #2381 (Graphical output stops with "switching to inteldrmfb from simple"):
Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup during fbdev init (Ville, Chris)
- Fix for Tigerlake (and earlier) to avoid spurious empty CSB events leading to hang (Chris, Bruce)
- Delay execlist processing for Tigerlake to avoid hang (Chris)
- Fix for Tigerlake RCS engine health check through heartbeat (Chris)
- Fix for Tigerlake reserved MOCS entries (Ayaz, Chris)
- Fix Media power gate sequence on Tigerlake (Rodrigo)
- Enable eLLC caching of display buffers for SKL+ (Ville)
- Support parsing of oversize batches on Gen9 (Matt, Chris)
- Exclude low pages (128KiB) of stolen from use to avoid thrashing during reset (Chris)
- Flush engines before Tigerlake breadcrumbs (Chris)
- Use the local HWSP offset during submission (Chris)
- Flush coherency domains on first set-domain-ioctl (Chris, Zbigniew)
- Use the active reference on the vma while capturing to avoid use-after-free (Chris)
- Fix MOCS PTE setting for gen9+ (Ville)
- Avoid NULL dereference on IPS driver callback while unbinding i915 (Chris)
- Avoid NULL dereference from PT/PD stash allocation error (Matt)
- Hold request reference for canceling an active context (Chris)
- Avoid infinite loop on x86-32 when mapping a lot of objects (Chris)
- Disallow WC mappings when processor doesn't support them (Chris)
- Return correct error in i915_gem_object_copy_blt() error path (Dan)
- Return correct error in intel_context_create_request() error path (Maarten)
- Tune down GuC communication enabled/disabled messages to debug (Jani)
- Fix rebased commit "Remove i915_request.lock requirement for execution callbacks" (Chris)
- Cancel outstanding work after disabling heartbeats on an engine (Chris)
- Signal cancelled requests (Chris)
- Retire cancelled requests on unload (Chris)
- Scrub HW state on driver remove (Chris)
- Undo forced context restores after trivial preemptions (Chris)
- Handle PCI unbind in PMU code (Tvrtko)
- Fix CPU hotplug with multiple GPUs in PMU code (Trtkko)
- Correctly set SFC capability for video engines (Venkata)
- Update GuC code to use firmware v49.0.1 (John, Matthew B., Daniele, Oscar, Michel, Rodrigo, Michal)
- Improve GuC warnings on loading failure (John)
- Avoid ownership race in buffer pool by clearing age (Chris)
- Use MMIO to read CSB in case of failure (Chris, Mika)
- Show engine properties in engine state dump to indicate changes (Chris, Joonas)
- Break up error capture compression loops with cond_resched() (Chris)
- Reduce GPU error capture mutex hold time to avoid khungtaskd (Chris)
- Serialise debugfs i915_gem_objects with ctx->mutex (Chris)
- Always test execution status on closing the context and close if not persistent (Chris)
- Avoid mixing integer types during batch copies (Chris, Jared)
- Skip over MI_NOOP when parsing to avoid overhead (Chris)
- Hold onto an explicit ref to i915_vma_work.pinned (Chris)
- Perform all asynchronous waits prior to marking payload start (Chris)
- Pull phys pread/pwrite implementations to the backend (Matt)
- Improve record of hung engines in error state (Tvrtko)
- Allow backends to override pread implementation (Matt)
- Reinforce LRC poisoning checks to confirm context survives execution (Chris)
- Fix memory region max size calculation (Matt)
- Fix order when adding blocks to memory region (Matt)
- Eliminate unused intel_virtual_engine_get_sibling func (Chris)
- Cleanup kasan warning for on-stack (unsigned long) casting (Chris)
- Onion unwind for scratch page allocation failure (Chris)
- Poison stolen pages before use (Chris)
- Selftest improvements (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112163407.GA20320@jlahtine-mobl.ger.corp.intel.com
Let's unmask the PCU event irq _after_ we've set up the
hardware and software to deal with the fallout. We can
also drop the PCU event bit from DEIER except when we
need it for rps.
And on the disable side we replace the hand rolled (and
unlocked) DEIER/IIR/IMR frobbing with ilk_disable_display_irq().
Ocd does require me to reorder it to be symmetric with
the enable path however.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
There is no GEN6_RPSTAT1 on ILK. Instead of reading that let's
try to get the same information from MEMSTAT_ILK. At least it
seems to track MEMSWCTL frequency request perfectly on my ILK.
It needs the same invert trick as the request value.
We don't want to put the invert thing into intel_gpu_freq()
and intel_freq_opcode() because that would incorrectly invert
the min/max/etc frequencies also.
One day someone might want to reverse engineer the formula for
converting these numbers to Hz, but for now we'll just report
them raw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
On the virtual engines, we only use the intel_breadcrumbs for tracking
signaling of stale breadcrumbs from the irq_workers. They do not have
any associated interrupt handling, active requests are passed to a
physical engine and associated breadcrumb interrupt handler. This causes
issues for us as we need to ensure that we do not actually try and
enable interrupts and the powermanagement required for them on the
virtual engine, as they will never be disabled. Instead, let's
specify the physical engine used for interrupt handler on a particular
breadcrumb.
v2: Drop b->irq_armed = true mocking for no interrupt HW
Fixes: 4fe6abb8f513 ("drm/i915/gt: Ignore irq enabling on the virtual engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-4-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
SSEUs are a GT capability, so track them under gt_info.
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-8-daniele.ceraolospurio@intel.com
