IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure
size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific
structure and increasing its size will lead to unwanted adapter errors.
Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original
and allocates zeroed skb buffer there by avoiding the memset for iss field.
Reorder code to minimize chip type checks.
Fixes: c2ed5611af ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl")
Link: https://lore.kernel.org/r/20220809184118.2029-1-rahul.lakkireddy@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing beyond
the destination member that is intended to be the starting point of
zeroing through the end of the struct. Additionally, since everything
appears to perform a roundup (including allocation), just change the size
of the struct itself and add a build-time check to validate the expected
size.
Link: https://lore.kernel.org/r/20211213223331.135412-13-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
Previous atomic increment/decrement logic expects the atomic count to be
'0' after the final decrement.
Replacing atomic count with refcount does not allow that, as
refcount_dec() considers count of 1 as underflow and triggers a kernel
splat.
Fix the current refcount logic by using the usual pattern of decrementing
the refcount and test if it is '0' on the final deref in
c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event().
Fixes: 7183451f84 ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting")
Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
missing qpid increment leads to skipping few qpids while allocating QP.
This eventually leads to adapter running out of qpids after establishing
fewer connections than it actually supports.
Current patch increments the qpid correctly.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/20210415151422.9139-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.
Fixes: 3408be145a ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allowing userspace to invoke these commands is probably going to crash
these drivers as they are not tested and not expecting to use them on a
user object.
For example pvrdma touches cq->ring_state which is not initialized for
user QPs.
These commands are effected:
- IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in
rdma-core, only hfi1, ipath and rxe calls it.
- IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only
ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in
rdma-core, only ipath and hfi1 call them.
- IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in
rdma-core, only ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere
- IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in
rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call
it.
Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.
Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.
Fixes: 41b2a71fc8 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_umem_num_pages() should only be used by things working with the SGL in
CPU pages directly.
Drivers building DMA lists should use the new ib_num_dma_blocks() which
returns the number of blocks rdma_umem_for_each_block() will return.
To make this general for DMA drivers requires a different implementation.
Computing DMA block count based on umem->address only works if the
requested page size is < PAGE_SIZE and/or the IOVA == umem->address.
Instead the number of DMA pages should be computed in the IOVA address
space, not umem->address. Thus the IOVA has to be stored inside the umem
so it can be used for these calculations.
For now set it to umem->address by default and fix it up if
ib_umem_find_best_pgsz() was called. This allows drivers to be converted
to ib_umem_num_dma_blocks() safely.
Link: https://lore.kernel.org/r/6-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Generally drivers should be using this core helper to split up the umem
into DMA pages.
These drivers are all probably wrong in some way to pass PAGE_SIZE in as
the HW page size. Either the driver doesn't support other page sizes and
it should use 4096, or the driver does support other page sizes and should
use ib_umem_find_best_pgsz() to select the best HW pages size of the HW
supported set.
The only case it could be correct is if the HW has a global setting for
PAGE_SIZE set at driver initialization time.
Link: https://lore.kernel.org/r/5-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
