IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add function can_ethtool_op_get_ts_info_hwts(). This function will be
used by CAN devices with hardware TX/RX timestamping support to
implement ethtool_ops::get_ts_info. This function does not offer
support to activate/deactivate hardware timestamps at device level nor
support the filter options (which is currently the case for all CAN
devices with hardware timestamping support).
The fact that hardware timestamp can not be deactivated at hardware
level does not impact the userland. As long as the user do not set
SO_TIMESTAMPING using a setsockopt() or ioctl(), the kernel will not
emit TX timestamps (RX timestamps will still be reproted as it is the
case currently).
Drivers which need more fine grained control remains free to implement
their own function, but we foresee that the generic function
introduced here will be sufficient for the majority.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the next patches, the software/virtual drivers (slcan, v(x)can)
will depend on drivers/net/can/dev/skb.o.
This patch changes the scope of the can-dev module to include the
above mentioned drivers.
To do so, we reuse the menu "CAN Device Drivers" and turn it into a
configmenu using the config symbol CAN_DEV (which we released in
previous patch). Also, add a description to this new CAN_DEV
menuconfig.
The symbol CAN_DEV now only triggers the build of skb.o. For this
reasons, all the macros from linux/module.h are deported from
drivers/net/can/dev/dev.c to drivers/net/can/dev/skb.c.
Finally, drivers/net/can/dev/Makefile is adjusted accordingly.
Link: https://lore.kernel.org/all/20220610143009.323579-3-mailhol.vincent@wanadoo.fr
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The statically enabled features of a CAN controller can be retrieved
using below formula:
| u32 ctrlmode_static = priv->ctrlmode & ~priv->ctrlmode_supported;
As such, there is no need to store this information. This patch remove
the field ctrlmode_static of struct can_priv and provides, in
replacement, the inline function can_get_static_ctrlmode() which
returns the same value.
Link: https://lore.kernel.org/all/20211213160226.56219-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For CAN buses to work, a termination resistor has to be present at both
ends of the bus. This resistor is usually 120 Ohms, other values may be
required for special bus topologies.
This patch adds support for a generic GPIO based CAN termination. The
resistor value has to be specified via device tree, and it can only be
attached to or detached from the bus. By default the termination is not
active.
Link: https://lore.kernel.org/r/20210818071232.20585-4-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since 20dd3850bc ("can: Speed up CAN frame receiption by using
ml_priv") the CAN framework uses per device specific data in the AF_CAN
protocol. For this purpose the struct net_device->ml_priv is used. Later
the ml_priv usage in CAN was extended for other users, one of them being
CAN_J1939.
Later in the kernel ml_priv was converted to an union, used by other
drivers. E.g. the tun driver started storing it's stats pointer.
Since tun devices can claim to be a CAN device, CAN specific protocols
will wrongly interpret this pointer, which will cause system crashes.
Mostly this issue is visible in the CAN_J1939 stack.
To fix this issue, we request a dedicated CAN pointer within the
net_device struct.
Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com
Fixes: 20dd3850bc ("can: Speed up CAN frame receiption by using ml_priv")
Fixes: ffd956eef6 ("can: introduce CAN midlayer private and allocate it automatically")
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Fixes: 497a5757ce ("tun: switch to net core provided statistics counters")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conflicts:
drivers/net/can/dev.c
commit 03f16c5075 ("can: dev: can_restart: fix use after free bug")
commit 3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
Code move.
drivers/net/dsa/b53/b53_common.c
commit 8e4052c32d ("net: dsa: b53: fix an off by one in checking "vlan->vid"")
commit b7a9e0da2d ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Field rename.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
