Commit Graph

1249 Commits

Author SHA1 Message Date
Xueqin Luo
3363e0adb3 PM: hibernate: Complain about memory map mismatches during resume
The system memory map can change over a hibernation-restore cycle due
to a defect in the platform firmware, and some of the page frames used
by the kernel before hibernation may not be available any more during
the subsequent restore which leads to the error below.

[  T357] PM: Image loading progress:   0%
[  T357] PM: Read 2681596 kbytes in 0.03 seconds (89386.53 MB/s)
[  T357] PM: Error -14 resuming
[  T357] PM: Failed to load hibernation image, recovering.
[  T357] PM: Basic memory bitmaps freed
[  T357] OOM killer enabled.
[  T357] Restarting tasks ... done.
[  T357] PM: resume from hibernation failed (-14)
[  T357] PM: Hibernation image not present or could not be loaded.

Add an error message to the unpack() function to allow problematic
page frames to be identified and the source of the problem to be
diagnosed more easily. This can save developers quite a bit of
debugging time.

Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
[ rjw: New subject, edited changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-01 19:20:14 +01:00
xiongxin
6e5d7300cb PM: hibernate: Fix mistake in kerneldoc comment
The actual maximum image size formula in hibernate_preallocate_memory()
is as follows:

max_size = (count - (size + PAGES_FOR_IO)) / 2
	    - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);

but the one in the kerneldoc comment of the function is different and
incorrect.

Fixes: ddeb648708 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers")
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-11-03 17:32:58 +01:00
Mario Limonciello
85850af4fc PM: hibernate: Allow hybrid sleep to work with s2idle
Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.

Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.

Fixes: 81d45bdf89 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-25 14:53:19 +02:00
Linus Torvalds
30c999937f Scheduler changes for v6.1:
- Debuggability:
 
      - Change most occurances of BUG_ON() to WARN_ON_ONCE()
 
      - Reorganize & fix TASK_ state comparisons, turn it into a bitmap
 
      - Update/fix misc scheduler debugging facilities
 
  - Load-balancing & regular scheduling:
 
      - Improve the behavior of the scheduler in presence of lot of
        SCHED_IDLE tasks - in particular they should not impact other
        scheduling classes.
 
      - Optimize task load tracking, cleanups & fixes
 
      - Clean up & simplify misc load-balancing code
 
  - Freezer:
 
      - Rewrite the core freezer to behave better wrt thawing and be simpler
        in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
        all the fallout.
 
  - Deadline scheduler:
 
      - Fix the DL capacity-aware code
 
      - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
 
      - Relax/optimize locking in task_non_contending()
 
  - Cleanups:
 
      - Factor out the update_current_exec_runtime() helper
 
      - Various cleanups, simplifications
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmM/01cRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1geZA/+PB4KC1T9aVxzaTHI36R03YgJYZmIdtxw
 wTf02MixePmz+gQCbepJbempGOh5ST28aOcI0xhdYOql5B63MaUBBMlB0HvGUyDG
 IU3zETqLMRtAbnSTdQFv8m++ECUtZYp8/x1FCel4WO7ya4ETkRu1NRfCoUepEhpZ
 aVAlae9LH3NBaF9t7s0PT2lTjf3pIzMFRkddJ0ywJhbFR3VnWat05fAK+J6fGY8+
 LS54coefNlJD4oDh5TY8uniL1j5SmWmmwbk9Cdj7bLU5P3dFSS0/+5FJNHJPVGDE
 srGT7wstRUcDrN0CnZo48VIUBiApJCCDqTfJYi9wNYd0NAHvwY6MIJJgEIY8mKsI
 L/qH26H81Wt+ezSZ/5JIlGlZ/LIeNaa6OO/fbWEYABBQogvvx3nxsRNUYKSQzumH
 CnSBasBjLnjWyLlK4qARM9cI7NFSEK6NUigrEx/7h8JFu/8T4DlSy6LsF1HUyKgq
 4+FJLAqG6cL0tcwB/fHYd0oRESN8dStnQhGxSojgufwLc7dlFULvCYF5JM/dX+/V
 IKwbOfIOeOn6ViMtSOXAEGdII+IQ2/ZFPwr+8Z5JC7NzvTVL6xlu/3JXkLZR3L7o
 yaXTSaz06h1vil7Z+GRf7RHc+wUeGkEpXh5vnarGZKXivhFdWsBdROIJANK+xR0i
 TeSLCxQxXlU=
 =KjMD
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "Debuggability:

   - Change most occurances of BUG_ON() to WARN_ON_ONCE()

   - Reorganize & fix TASK_ state comparisons, turn it into a bitmap

   - Update/fix misc scheduler debugging facilities

  Load-balancing & regular scheduling:

   - Improve the behavior of the scheduler in presence of lot of
     SCHED_IDLE tasks - in particular they should not impact other
     scheduling classes.

   - Optimize task load tracking, cleanups & fixes

   - Clean up & simplify misc load-balancing code

  Freezer:

   - Rewrite the core freezer to behave better wrt thawing and be
     simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
     fixing/adjusting all the fallout.

  Deadline scheduler:

   - Fix the DL capacity-aware code

   - Factor out dl_task_is_earliest_deadline() &
     replenish_dl_new_period()

   - Relax/optimize locking in task_non_contending()

  Cleanups:

   - Factor out the update_current_exec_runtime() helper

   - Various cleanups, simplifications"

* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  sched: Fix more TASK_state comparisons
  sched: Fix TASK_state comparisons
  sched/fair: Move call to list_last_entry() in detach_tasks
  sched/fair: Cleanup loop_max and loop_break
  sched/fair: Make sure to try to detach at least one movable task
  sched: Show PF_flag holes
  freezer,sched: Rewrite core freezer logic
  sched: Widen TAKS_state literals
  sched/wait: Add wait_event_state()
  sched/completion: Add wait_for_completion_state()
  sched: Add TASK_ANY for wait_task_inactive()
  sched: Change wait_task_inactive()s match_state
  freezer,umh: Clean up freezer/initrd interaction
  freezer: Have {,un}lock_system_sleep() save/restore flags
  sched: Rename task_running() to task_on_cpu()
  sched/fair: Cleanup for SIS_PROP
  sched/fair: Default to false in test_idle_cores()
  sched/fair: Remove useless check in select_idle_core()
  sched/fair: Avoid double search on same cpu
  sched/fair: Remove redundant check in select_idle_smt()
  ...
2022-10-10 09:10:28 -07:00
Mario Limonciello
811d59fdf5 ACPI: s2idle: Add a new ->check() callback for platform_s2idle_ops
On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform.  To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-09 17:37:40 +02:00
Peter Zijlstra
f5d39b0208 freezer,sched: Rewrite core freezer logic
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.

By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.

As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).

Specifically; the current scheme works a little like:

	freezer_do_not_count();
	schedule();
	freezer_count();

And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.

However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.

That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.

This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.

As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:

	TASK_FREEZABLE	-> TASK_FROZEN
	__TASK_STOPPED	-> TASK_FROZEN
	__TASK_TRACED	-> TASK_FROZEN

The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).

The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.

With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
2022-09-07 21:53:50 +02:00
Peter Zijlstra
5950e5d574 freezer: Have {,un}lock_system_sleep() save/restore flags
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().

In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org
2022-09-07 21:53:48 +02:00
Linus Torvalds
228dfe98a3 Char / Misc driver changes for 6.0-rc1
Here is the large set of char and misc and other driver subsystem
 changes for 6.0-rc1.
 
 Highlights include:
 	- large set of IIO driver updates, additions, and cleanups
 	- new habanalabs device support added (loads of register maps
 	  much like GPUs have)
 	- soundwire driver updates
 	- phy driver updates
 	- slimbus driver updates
 	- tiny virt driver fixes and updates
 	- misc driver fixes and updates
 	- interconnect driver updates
 	- hwtracing driver updates
 	- fpga driver updates
 	- extcon driver updates
 	- firmware driver updates
 	- counter driver update
 	- mhi driver fixes and updates
 	- binder driver fixes and updates
 	- speakup driver fixes
 
 Full details are in the long shortlog contents.
 
 All of these have been in linux-next for a while without any reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
 1vU9Vtq2c73uBVLdZm4m
 =AwP3
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  changes for 6.0-rc1.

  Highlights include:

   - large set of IIO driver updates, additions, and cleanups

   - new habanalabs device support added (loads of register maps much
     like GPUs have)

   - soundwire driver updates

   - phy driver updates

   - slimbus driver updates

   - tiny virt driver fixes and updates

   - misc driver fixes and updates

   - interconnect driver updates

   - hwtracing driver updates

   - fpga driver updates

   - extcon driver updates

   - firmware driver updates

   - counter driver update

   - mhi driver fixes and updates

   - binder driver fixes and updates

   - speakup driver fixes

  All of these have been in linux-next for a while without any reported
  problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
  drivers: lkdtm: fix clang -Wformat warning
  char: remove VR41XX related char driver
  misc: Mark MICROCODE_MINOR unused
  spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
  dt-bindings: iio: adc: Add compatible for MT8188
  iio: light: isl29028: Fix the warning in isl29028_remove()
  iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  iio: adc: max1027: unlock on error path in max1027_read_single_value()
  iio: proximity: sx9324: add empty line in front of bullet list
  iio: magnetometer: hmc5843: Remove duplicate 'the'
  iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  ...
2022-08-04 11:05:48 -07:00
Linus Torvalds
c013d0af81 for-5.20/block-2022-07-29
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLko3gQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpmQaD/90NKFj4v8I456TUQyg1jimXEsL+e84E6o2
 ALWVb6JzQvlPVQXNLnK5YKIunMWOTtTMz0nyB8sVRwVJVJO0P5d7QopAkZM8fkyU
 MK5OCzoryENw4DTc2wJS4in6cSbGylIuN74wMzlf7+M67JTImfoZQhbTMcjwzZfn
 b3OlL6sID7zMXwGcuOJPZyUJICCpDhzdSF9JXqKma5PQuG2SBmQyvFxJAcsoFBPc
 YetnoRIOIN6yBvsIZaPaYq7XI9MIvF0e67EQtyCEHj4tHpyVnyDWkeObVFULsISU
 gGEKbkYPvNUzRAU5Q1NBBHh1tTfkf/MaUxTuZwoEwZ/s04IGBGMmrZGyfvdfzYo6
 M7NwSEg/TrUSNfTwn65mQi7uOXu1pGkJrqz84Flm8u9Qid9Vd7LExLG5p/ggnWdH
 5th93MDEmtEg29e9DXpEAuS5d0t3TtSvosflaKpyfNNfr+P0rWCN6GM/uW62VUTK
 ls69SQh/AQJRbg64jU4xper6WhaYtSXK7TKEnxJycoEn9gYNyCcdot2uekth0xRH
 ChHGmRlteiqe/y4uFWn/2dcxWjoleiHbFjTaiRL75WVl8wIDEjw02LGuoZ61Ss9H
 WOV+MT7KqNjBGe6lreUY+O/PO02dzmoR6heJXN19p8zr/pBuLCTGX7UpO7rzgaBR
 4N1HEozvIw==
 =celk
 -----END PGP SIGNATURE-----

Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Improve the type checking of request flags (Bart)

 - Ensure queue mapping for a single queues always picks the right queue
   (Bart)

 - Sanitize the io priority handling (Jan)

 - rq-qos race fix (Jinke)

 - Reserved tags handling improvements (John)

 - Separate memory alignment from file/disk offset aligment for O_DIRECT
   (Keith)

 - Add new ublk driver, userspace block driver using io_uring for
   communication with the userspace backend (Ming)

 - Use try_cmpxchg() to cleanup the code in various spots (Uros)

 - Finally remove bdevname() (Christoph)

 - Clean up the zoned device handling (Christoph)

 - Clean up independent access range support (Christoph)

 - Clean up and improve block sysfs handling (Christoph)

 - Clean up and improve teardown of block devices.

   This turns the usual two step process into something that is simpler
   to implement and handle in block drivers (Christoph)

 - Clean up chunk size handling (Christoph)

 - Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
   Ming, Sebastian, Yang, Ying)

* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
  ublk_drv: fix double shift bug
  ublk_drv: make sure that correct flags(features) returned to userspace
  ublk_drv: fix error handling of ublk_add_dev
  ublk_drv: fix lockdep warning
  block: remove __blk_get_queue
  block: call blk_mq_exit_queue from disk_release for never added disks
  blk-mq: fix error handling in __blk_mq_alloc_disk
  ublk: defer disk allocation
  ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
  ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
  ublk: cleanup ublk_ctrl_uring_cmd
  ublk: simplify ublk_ch_open and ublk_ch_release
  ublk: remove the empty open and release block device operations
  ublk: remove UBLK_IO_F_PREFLUSH
  ublk: add a MAINTAINERS entry
  block: don't allow the same type rq_qos add more than once
  mmc: fix disk/queue leak in case of adding disk failure
  ublk_drv: fix an IS_ERR() vs NULL check
  ublk: remove UBLK_IO_F_INTEGRITY
  ublk_drv: remove unneeded semicolon
  ...
2022-08-02 13:46:35 -07:00
Rafael J. Wysocki
aa727b7b4b Merge branches 'pm-devfreq', 'pm-qos', 'pm-tools' and 'pm-docs'
Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:

 - Add new devfreq driver for Mediatek CCI (Cache Coherent
   Interconnect) (Johnson Wang).

 - Convert the Samsung Exynos SoC Bus bindings to DT schema of
   exynos-bus.c (Krzysztof Kozlowski).

 - Address kernel-doc warnings by adding the description for unused
   fucntion parameters in devfreq core (Mauro Carvalho Chehab).

 - Use NULL to pass a null pointer rather than zero according to the
   function propotype in imx-bus.c (Colin Ian King).

 - Print error message instead of error interger value in
   tegra30-devfreq.c (Dmitry Osipenko).

 - Add checks to prevent setting negative frequency QoS limits for
   CPUs (Shivnandan Kumar).

 - Update the pm-graph suite of utilities to the latest revision 5.9
   including multiple improvements (Todd Brandt).

 - Drop pme_interrupt reference from the PCI power management
   documentation (Mario Limonciello).

* pm-devfreq:
  PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
  PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
  PM / devfreq: shut up kernel-doc warnings
  dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
  PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
  dt-bindings: interconnect: Add MediaTek CCI dt-bindings

* pm-qos:
  PM: QoS: Add check to make sure CPU freq is non-negative

* pm-tools:
  pm-graph v5.9

* pm-docs:
  Documentation: PM: Drop pme_interrupt reference
2022-07-29 19:46:00 +02:00
Rafael J. Wysocki
954a83fc60 Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'
Merge core device power management changes for v5.20-rc1:

 - Extend support for wakeirq to callback wrappers used during system
   suspend and resume (Ulf Hansson).

 - Defer waiting for device probe before loading a hibernation image
   till the first actual device access to avoid possible deadlocks
   reported by syzbot (Tetsuo Handa).

 - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
   Helgaas).

 - Add Raptor Lake-P to the list of processors supported by the Intel
   RAPL driver (George D Sworo).

 - Add Alder Lake-N and Raptor Lake-P to the list of processors for
   which Power Limit4 is supported in the Intel RAPL driver (Sumeet
   Pawnikar).

 - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
   attempting to remove it (Hsin-Yi Wang).

 - Change the Energy Model code to represent power in micro-Watts and
   adjust its users accordingly (Lukasz Luba).

* pm-core:
  PM: runtime: Extend support for wakeirq for force_suspend|resume

* pm-sleep:
  PM: hibernate: defer device probing when resuming from hibernation
  PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP

* powercap:
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  powercap: intel_rapl: Add support for RAPTORLAKE_P

* pm-domains:
  PM: domains: Ensure genpd_debugfs_dir exists before remove

* pm-em:
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
2022-07-29 19:33:13 +02:00
Shivnandan Kumar
8d36694245 PM: QoS: Add check to make sure CPU freq is non-negative
CPU frequency should never be negative.

If some client driver calls freq_qos_update_request with a
negative value which will be very high in absolute terms,
then frequency QoS sets max CPU freq at fmax as it considers
it's absolute value but it will add plist node with negative
priority.

plist node has priority from INT_MIN (highest) to INT_MAX(lowest).
Once priority is set as negative, another client will not be able
to reduce CPU frequency.

Adding check to make sure CPU freq is non-negative will fix
this problem.

Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26 20:48:33 +02:00
Tetsuo Handa
8386c414e2 PM: hibernate: defer device probing when resuming from hibernation
syzbot is reporting hung task at misc_open() [1], for there is a race
window of AB-BA deadlock which involves probe_count variable. Currently
wait_for_device_probe() from snapshot_open() from misc_open() can sleep
forever with misc_mtx held if probe_count cannot become 0.

When a device is probed by hub_event() work function, probe_count is
incremented before the probe function starts, and probe_count is
decremented after the probe function completed.

There are three cases that can prevent probe_count from dropping to 0.

  (a) A device being probed stopped responding (i.e. broken/malicious
      hardware).

  (b) A process emulating a USB device using /dev/raw-gadget interface
      stopped responding for some reason.

  (c) New device probe requests keeps coming in before existing device
      probe requests complete.

The phenomenon syzbot is reporting is (b). A process which is holding
system_transition_mutex and misc_mtx is waiting for probe_count to become
0 inside wait_for_device_probe(), but the probe function which is called
 from hub_event() work function is waiting for the processes which are
blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface.

This patch mitigates (b) by deferring wait_for_device_probe() from
snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that
the possibility of (b) remains as long as any thread which is emulating a
USB device via /dev/raw-gadget interface can be blocked by uninterruptible
blocking operations (e.g. mutex_lock()).

Please also note that (a) and (c) are not addressed. Regarding (c), we
should change the code to wait for only one device which contains the
image for resuming from hibernation. I don't know how to address (a), for
use of timeout for wait_for_device_probe() might result in loss of user
data in the image. Maybe we should require the userland to wait for the
image device before opening /dev/snapshot interface.

Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1]
Reported-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26 20:39:01 +02:00
Lukasz Luba
ae6ccaa650 PM: EM: convert power field to micro-Watts precision and align drivers
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.

Update all EM users which access 'power' field and assume the value is
in milli-Watts.

Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.

Example calculation which shows the rounding error and impact:

power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz

power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18

power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21

max_freq = 2000MHz

cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000

cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203

The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Bart Van Assche
568e34ed73 PM: Use the enum req_op and blk_opf_t types
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the first two
hib_submit_io() arguments into a single argument.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-62-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 12:14:33 -06:00
Kalesh Singh
261e224d6a pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig
Systems that initiate frequent suspend/resume from userspace
can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP
config.

This allows for certain sleep-sensitive code (wireguard/rng) to
decide on what preparatory work should be performed (or not) in
their pm_notification callbacks.

This patch was prompted by the discussion at [1] which attempts
to remove CONFIG_ANDROID that currently guards these code paths.

[1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/

Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-01 10:39:20 +02:00
Dmitry Osipenko
2027732600 PM: hibernate: Use kernel_can_power_off()
Use new kernel_can_power_off() API instead of legacy pm_power_off global
variable to fix regressed hibernation to disk where machine no longer
powers off when it should because ACPI power driver transitioned to the
new sys-off based API and it doesn't use pm_power_off anymore.

Fixes: 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
Reported-by: Ken Moffat <zarniwhhop@ntlworld.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-06-21 20:57:30 +02:00
Linus Torvalds
9d004b2f4f cxl for 5.19
- Add driver-core infrastructure for lockdep validation of
   device_lock(), and fixup a deadlock report that was previously hidden
   behind the 'lockdep no validate' policy.
 
 - Add CXL _OSC support for claiming native control of CXL hotplug and
   error handling.
 
 - Disable suspend in the presence of CXL memory unless and until a
   protocol is identified for restoring PCI device context from memory
   hosted on CXL PCI devices.
 
 - Add support for snooping CXL mailbox commands to protect against
   inopportune changes, like set-partition with the 'immediate' flag set.
 
 - Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
   / 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
   HDM Capability).
 
 - Miscellaneous cleanups and fixes from -next exposure.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
 Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
 9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
 =p92w
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull cxl updates from Dan Williams:
 "Compute Express Link (CXL) updates for this cycle.

  The highlight is new driver-core infrastructure and CXL subsystem
  changes for allowing lockdep to validate device_lock() usage. Thanks
  to PeterZ for setting me straight on the current capabilities of the
  lockdep API, and Greg acked it as well.

  On the CXL ACPI side this update adds support for CXL _OSC so that
  platform firmware knows that it is safe to still grant Linux native
  control of PCIe hotplug and error handling in the presence of CXL
  devices. A circular dependency problem was discovered between suspend
  and CXL memory for cases where the suspend image might be stored in
  CXL memory where that image also contains the PCI register state to
  restore to re-enable the device. Disable suspend for now until an
  architecture is defined to clarify that conflict.

  Lastly a collection of reworks, fixes, and cleanups to the CXL
  subsystem where support for snooping mailbox commands and properly
  handling the "mem_enable" flow are the highlights.

  Summary:

   - Add driver-core infrastructure for lockdep validation of
     device_lock(), and fixup a deadlock report that was previously
     hidden behind the 'lockdep no validate' policy.

   - Add CXL _OSC support for claiming native control of CXL hotplug and
     error handling.

   - Disable suspend in the presence of CXL memory unless and until a
     protocol is identified for restoring PCI device context from memory
     hosted on CXL PCI devices.

   - Add support for snooping CXL mailbox commands to protect against
     inopportune changes, like set-partition with the 'immediate' flag
     set.

   - Rework how the driver detects legacy CXL 1.1 configurations (CXL
     DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
     configurations (CXL HDM Capability).

   - Miscellaneous cleanups and fixes from -next exposure"

* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
  cxl/port: Enable HDM Capability after validating DVSEC Ranges
  cxl/port: Reuse 'struct cxl_hdm' context for hdm init
  cxl/port: Move endpoint HDM Decoder Capability init to port driver
  cxl/pci: Drop @info argument to cxl_hdm_decode_init()
  cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
  cxl/mem: Skip range enumeration if mem_enable clear
  cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
  cxl/pci: Move cxl_await_media_ready() to the core
  cxl/mem: Validate port connectivity before dvsec ranges
  cxl/mem: Fix cxl_mem_probe() error exit
  cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
  cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
  cxl/mem: Drop mem_enabled check from wait_for_media()
  nvdimm: Fix firmware activation deadlock scenarios
  device-core: Kill the lockdep_mutex
  nvdimm: Drop nd_device_lock()
  ACPI: NFIT: Drop nfit_device_lock()
  nvdimm: Replace lockdep_mutex with local lock classes
  cxl: Drop cxl_device_lock()
  cxl/acpi: Add root device lockdep validation
  ...
2022-05-27 21:24:19 -07:00
Rafael J. Wysocki
16a23f394d Merge branches 'pm-em' and 'pm-cpuidle'
Marge Energy Model support updates and cpuidle updates for 5.19-rc1:

 - Update the Energy Model support code to allow the Energy Model to be
   artificial, which means that the power values may not be on a uniform
   scale with other devices providing power information, and update the
   cpufreq_cooling and devfreq_cooling thermal drivers to support
   artificial Energy Models (Lukasz Luba).

 - Make DTPM check the Energy Model type (Lukasz Luba).

 - Fix policy counter decrementation in cpufreq if Energy Model is in
   use (Pierre Gondois).

 - Add AlderLake processor support to the intel_idle driver (Zhang Rui).

 - Fix regression leading to no genpd governor in the PSCI cpuidle
   driver and fix the riscv-sbi cpuidle driver to allow a genpd
   governor to be used (Ulf Hansson).

* pm-em:
  PM: EM: Decrement policy counter
  powercap: DTPM: Check for Energy Model type
  thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling
  Documentation: EM: Add artificial EM registration description
  PM: EM: Remove old debugfs files and print all 'flags'
  PM: EM: Change the order of arguments in the .active_power() callback
  PM: EM: Use the new .get_cost() callback while registering EM
  PM: EM: Add artificial EM flag
  PM: EM: Add .get_cost() callback

* pm-cpuidle:
  cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used
  cpuidle: psci: Fix regression leading to no genpd governor
  intel_idle: Add AlderLake support
2022-05-23 19:18:51 +02:00
Pierre Gondois
c9d8923bfb PM: EM: Decrement policy counter
In commit e458716a92 ("PM: EM: Mark inefficiencies in CPUFreq"),
cpufreq_cpu_get() is called without a cpufreq_cpu_put(), permanently
increasing the reference counts of the policy struct.

Decrement the reference count once the policy struct is not used
anymore.

Fixes: e458716a92 ("PM: EM: Mark inefficiencies in CPUFreq")
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-11 19:15:14 +02:00
Dan Williams
9ea4dcf498 PM: CXL: Disable suspend
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.

Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.

It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.

Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.

Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-22 16:09:42 -07:00
Haowen Bai
e5a3b0c5b6 PM: hibernate: Don't mark comment as kernel-doc
Change the comment to a normal (non-kernel-doc) comment to avoid
these kernel-doc warnings:

kernel/power/snapshot.c:335: warning: This comment starts with '/**', but
 isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Data types related to memory bitmaps.

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 17:09:37 +02:00
Yang Li
467df4cfdc PM: hibernate: Fix some kernel-doc comments
Add parameter description in alloc_rtree_node()  kernel-doc
comment and fix several inconsistent function name descriptions.

Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.

kernel/power/snapshot.c:438: warning: Function parameter or member
'gfp_mask' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'safe_needed' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member 'ca'
not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'list' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:916: warning: expecting prototype for
memory_bm_rtree_next_pfn(). Prototype was for memory_bm_next_pfn()
instead
kernel/power/snapshot.c:1947: warning: expecting prototype for
alloc_highmem_image_pages(). Prototype was for alloc_highmem_pages()
instead
kernel/power/snapshot.c:2230: warning: expecting prototype for load
header(). Prototype was for load_header() instead

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Comment adjustments to avoid line breaks ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:44:20 +02:00
David Cohen
ce1cb680ff PM: sleep: enable dynamic debug support within pm_pr_dbg()
Currently pm_pr_dbg() is used to filter kernel pm debug messages based
on pm_debug_messages_on flag. The problem is if we enable/disable this
flag it will affect all pm_pr_dbg() calls at once, so we can't
individually control them.

This patch changes pm_pr_dbg() implementation as such:

 - If pm_debug_messages_on is enabled, print the message.
 - If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
   enabled, only print the messages explicitly enabled on
   /sys/kernel/debug/dynamic_debug/control.
 - If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
   disabled, don't print the message.

Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:34:01 +02:00
David Cohen
ae20cb9aec PM: sleep: Narrow down -DDEBUG on kernel/power/ files
The macro -DDEBUG is broadly enabled on kernel/power/ directory if
CONFIG_DYNAMIC_DEBUG is enabled. As side effect all debug messages using
pr_debug() and dev_dbg() are enabled by default on dynamic debug.
We're reworking pm_pr_dbg() to support dynamic debug, where pm_pr_dbg()
will print message if either pm_debug_messages_on flag is set or if it's
explicitly enabled on dynamic debug's control. That means if we let
-DDEBUG broadly set, the pm_debug_messages_on flag will be bypassed by
default on pm_pr_dbg() if dynamic debug is also enabled.

The files that directly use pr_debug() and dev_dbg() on kernel/power/ are:
 - swap.c
 - snapshot.c
 - energy_model.c

And those files do not use pm_pr_dbg(). So if we limit -DDEBUG to them,
we keep the same functional behavior while allowing the pm_pr_dbg()
refactor.

Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:34:01 +02:00
Lukasz Luba
16857482b8 PM: EM: Remove old debugfs files and print all 'flags'
The Energy Model gets more bits used in 'flags'. Avoid adding another
debugfs file just to print what is the status of a new flag. Simply
remove old debugfs files and add one generic which prints all flags
as a hex value.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:26:17 +02:00
Lukasz Luba
75a3a99a5a PM: EM: Change the order of arguments in the .active_power() callback
The .active_power() callback passes the device pointer when it's called.
Aligned with a convetion present in other subsystems and pass the 'dev'
as a first argument. It looks more cleaner.

Adjust all affected drivers which implement that API callback.

Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:26:17 +02:00
Lukasz Luba
9136246311 PM: EM: Use the new .get_cost() callback while registering EM
The Energy Model (EM) allows to provide the 'cost' values when the device
driver provides the .get_cost() optional callback. This removes
restriction which is in the EM calculation function of the 'cost'
for each performance state. Now, the driver is in charge of providing
the right values which are then used by Energy Aware Scheduler.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:26:17 +02:00
Pierre Gondois
fc3a9a9858 PM: EM: Add artificial EM flag
The Energy Model (EM) can be used on platforms which are missing real
power information. Those platforms would implement .get_cost() which
populates needed values for the Energy Aware Scheduler (EAS). The EAS
doesn't use 'power' fields from EM, but other frameworks might use them.
Thus, to avoid miss-usage of this specific type of EM, introduce a new
flags which can be checked by other frameworks.

Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13 16:26:17 +02:00
Linus Torvalds
616355cc81 for-5.18/block-2022-03-18
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI0+GcQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprUpD/9aTJEnj7VCw7UouSsg098sdjtoy9ilslU3
 ew47K8CIXHbCB4CDqLnFyvCwAdG1XGgS+fUmFAxvTr29R9SZeS5d+bXL6sZzEo0C
 bwxsJy9MM2QRtMvB+giAt1myXbwB8cG+ketMBWXqwXXRHRzPbbQfMZia7FqWMnfY
 KQanH9IwYHp1oa5U/W6Qcjm4oCnLgBMRwqByzUCtiF3y9qgaLkK+3IgkNwjJQjLA
 DTeUJ/9CgxGQQbzA+LPktbw2xfTqiUfcKq0mWx6Zt4wwNXn1ClqUDUXX6QSM8/5u
 3OimbscSkEPPTIYZbVBPkhFnAlQb4JaJEgOrbXvYKVV2Dh+eZY81XwNeE/E8gdBY
 TnHOTOCjkN/4sR3hIrWazlJzPLdpPA0eOYrhguCraQsX9mcsYNxlJ9otRv/Ve99g
 uqL0RZg3+NoK84fm79FCGy/ZmPQJvJttlBT9CKVwylv/Lky42xWe7AdM3OipKluY
 2nh+zN5Ai7WxZdTKXQFRhCSWfWQ+1qW51tB3dcGW+BooZr/oox47qKQVcHsEWbq1
 RNR45F5a4AuPwYUHF/P36WviLnEuq9AvX7OTTyYOplyVQohKIoDXp9chVzLNzBiZ
 KBR00W6MLKKKN+8foalQWgNyb2i2PH7Ib4xRXvXj/22Vwxg5UmUoBmSDSas9SZUS
 +dMo7CtNgA==
 =DpgP
 -----END PGP SIGNATURE-----

Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)

 - blk-rq-qos completion fix (Tejun)

 - blk-cgroup merge fix (Tejun)

 - Add offline error return value to distinguish it from an IO error on
   the device (Song)

 - IO stats fixes (Zhang, Christoph)

 - blkcg refcount fixes (Ming, Yu)

 - Fix for indefinite dispatch loop softlockup (Shin'ichiro)

 - blk-mq hardware queue management improvements (Ming)

 - sbitmap dead code removal (Ming, John)

 - Plugging merge improvements (me)

 - Show blk-crypto capabilities in sysfs (Eric)

 - Multiple delayed queue run improvement (David)

 - Block throttling fixes (Ming)

 - Start deprecating auto module loading based on dev_t (Christoph)

 - bio allocation improvements (Christoph, Chaitanya)

 - Get rid of bio_devname (Christoph)

 - bio clone improvements (Christoph)

 - Block plugging improvements (Christoph)

 - Get rid of genhd.h header (Christoph)

 - Ensure drivers use appropriate flush helpers (Christoph)

 - Refcounting improvements (Christoph)

 - Queue initialization and teardown improvements (Ming, Christoph)

 - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
   Lukas, Nian, Yang, Eric, Chengming)

* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
  block: cancel all throttled bios in del_gendisk()
  block: let blkcg_gq grab request queue's refcnt
  block: avoid use-after-free on throttle data
  block: limit request dispatch loop duration
  block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
  sr: simplify the local variable initialization in sr_block_open()
  block: don't merge across cgroup boundaries if blkcg is enabled
  block: fix rq-qos breakage from skipping rq_qos_done_bio()
  block: flush plug based on hardware and software queue order
  block: ensure plug merging checks the correct queue at least once
  block: move rq_qos_exit() into disk_release()
  block: do more work in elevator_exit
  block: move blk_exit_queue into disk_release
  block: move q_usage_counter release into blk_queue_release
  block: don't remove hctx debugfs dir from blk_mq_exit_queue
  block: move blkcg initialization/destroy into disk allocation/release handler
  sr: implement ->free_disk to simplify refcounting
  sd: implement ->free_disk to simplify refcounting
  sd: delay calling free_opal_dev
  sd: call sd_zbc_release_disk before releasing the scsi_device reference
  ...
2022-03-21 16:48:55 -07:00
Randy Dunlap
7a64ca17e4 PM: suspend: fix return value of __setup handler
If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.

  Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
    test_suspend=invalid"

and

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     test_suspend=invalid

Fixes: 2ce986892f ("PM / sleep: Enhance test_suspend option with repeat capability")
Fixes: 27ddcc6596 ("PM / sleep: Add state field to pm_states[] entries")
Fixes: a9d7052363 ("PM: Separate suspend to RAM functionality from core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01 18:55:07 +01:00
Randy Dunlap
ba7ffcd4c4 PM: hibernate: fix __setup handler error handling
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.

Fixes: 317cf7e5e8 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01 18:51:11 +01:00
Jiapeng Chong
444e1154b2 PM: hibernate: Clean up non-kernel-doc comments
Address the following W=1 kernel build warning:

kernel/power/swap.c:120: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01 16:20:46 +01:00
Ye Bin
3f51aa9e29 PM: hibernate: fix load_image_and_restore() error path
As 'swsusp_check' open 'hib_resume_bdev', if call 'create_basic_memory_bitmaps'
failed, we need to close 'hib_resume_bdev' in 'load_image_and_restore' function.

Signed-off-by: Ye Bin <yebin10@huawei.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-16 19:47:52 +01:00
Rafael J. Wysocki
cb1f65c1e1 PM: s2idle: ACPI: Fix wakeup interrupts handling
After commit e3728b50cd ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed.  Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.

The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop().  However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.

To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup.  Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one.  [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]

Fixes: e3728b50cd ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-07 21:02:31 +01:00
Christoph Hellwig
07888c665b block: pass a block_device and opf to bio_alloc
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment.  NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.

Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 07:49:59 -07:00
Christoph Hellwig
322cbb50de block: remove genhd.h
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it.  So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 07:49:59 -07:00
Amadeusz Sławiński
33569ef3c7 PM: hibernate: Remove register_nosave_region_late()
It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-25 18:34:08 +01:00
Greg Kroah-Hartman
c9d967b2ce PM: wakeup: simplify the output logic of pm_show_wakelocks()
The buffer handling in pm_show_wakelocks() is tricky, and hopefully
correct.  Ensure it really is correct by using sysfs_emit_at() which
handles all of the tricky string handling logic in a PAGE_SIZE buffer
for us automatically as this is a sysfs file being read from.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-25 18:27:02 +01:00
David Woodhouse
74d9555580 PM: hibernate: Allow ACPI hardware signature to be honoured
Theoretically, when the hardware signature in FACS changes, the OS
is supposed to gracefully decline to attempt to resume from S4:

 "If the signature has changed, OSPM will not restore the system
  context and can boot from scratch"

In practice, Windows doesn't do this and many laptop vendors do allow
the signature to change especially when docking/undocking, so it would
be a bad idea to simply comply with the specification by default in the
general case.

However, there are use cases where we do want the compliant behaviour
and we know it's safe. Specifically, when resuming virtual machines where
we know the hypervisor has changed sufficiently that resume will fail.
We really want to be able to *tell* the guest kernel not to try, so it
boots cleanly and doesn't just crash. This patch provides a way to opt
in to the spec-compliant behaviour on the command line.

A follow-up patch may do this automatically for certain "known good"
machines based on a DMI match, or perhaps just for all hypervisor
guests since there's no good reason a hypervisor would change the
hardware_signature that it exposes to guests *unless* it wants them
to obey the ACPI specification.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-08 16:06:10 +01:00
Evan Green
88a5045f17 PM: hibernate: Fix snapshot partial write lengths
snapshot_write() is inappropriately limiting the amount of data that can
be written in cases where a partial page has already been written. For
example, one would expect to be able to write 1 byte, then 4095 bytes to
the snapshot device, and have both of those complete fully (since now
we're aligned to a page again). But what ends up happening is we write 1
byte, then 4094/4095 bytes complete successfully.

The reason is that simple_write_to_buffer()'s second argument is the
total size of the buffer, not the size of the buffer minus the offset.
Since simple_write_to_buffer() accounts for the offset in its
implementation, snapshot_write() can just pass the full page size
directly down.

Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-24 13:50:18 +01:00
Thomas Zeitlhofer
cefcf24b4d PM: hibernate: use correct mode for swsusp_close()
Commit 39fbef4b0f ("PM: hibernate: Get block device exclusively in
swsusp_check()") changed the opening mode of the block device to
(FMODE_READ | FMODE_EXCL).

In the corresponding calls to swsusp_close(), the mode is still just
FMODE_READ which triggers the warning in blkdev_flush_mapping() on
resume from hibernate.

So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the
device.

Fixes: 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-24 13:45:54 +01:00
Linus Torvalds
833db72142 Power management updates for 5.16-rc1
- Add support for inefficient operating performance points to the
    Energy Model and modify cpufreq to use them properly (Vincent
    Donnefort).
 
  - Rearrange the DTPM framework code to simplify it and make it easier
    to follow (Daniel Lezcano).
 
  - Fix power intialization in DTPM (Daniel Lezcano).
 
  - Add CPU load consideration when estimating the instaneous power
    consumption in DTPM (Daniel Lezcano).
 
  - Fix cpu->pstate.turbo_freq initialization in intel_pstate (Zhang
    Rui).
 
  - Make intel_pstate process HWP Guaranteed change notifications from
    the processor (Srinivas Pandruvada).
 
  - Fix typo in cpufreq.h (Rafael Wysocki).
 
  - Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).
 
  - Fix the parameter usage of the newly added perf-domain API (Hector
    Yuan).
 
  - Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
    Guenter Roeck, and Arnd Bergmann).
 
  - Fix kobject memory leaks in cpuidle error paths (Anel Orazgaliyeva).
 
  - Make intel_idle enable interrupts before entering C1 on some Xeon
    processor models (Artem Bityutskiy).
 
  - Clean up hib_wait_io() (Falla Coulibaly).
 
  - Fix sparse warnings in hibernation-related code (Anders Roxell).
 
  - Use vzalloc() and kzalloc() instead of their open-coded
    equivalents in hibernation-related code (Cai Huoqing).
 
  - Prevent user space from crashing the kernel by attempting to
    restore the system state from a swap partition in use (Ye Bin).
 
  - Do not let "syscore" devices runtime-suspend during system PM
    transitions (Rafael Wysocki).
 
  - Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki).
 
  - Pause cpuidle later and resume it earlier during system PM
    transitions (Rafael Wysocki).
 
  - Make system suspend code use valid_state() consistently (Rafael
    Wysocki).
 
  - Add support for enabling wakeup IRQs after invoking the
    ->runtime_suspend() callback and make two drivers use it (Chunfeng
    Yun).
 
  - Make the association of ACPI device objects with PCI devices more
    straightforward and simplify the code doing that for all devices
    in general (Rafael Wysocki).
 
  - Eliminate struct pci_platform_pm_ops and handle the both of its
    users (PCI and Intel MID) directly in the PCI bus code (Rafael
    Wysocki).
 
  - Simplify and clarify ACPI PCI device PM helpers (Rafael Wysocki).
 
  - Fix ordering of operations in pci_back_from_sleep() (Rafael
    Wysocki).
 
  - Make exynos-ppmu use hyphens in DT properties (Krzysztof
    Kozlowski).
 
  - Simplify parsing event-type from DT in exynos-ppmu (Krzysztof
    Kozlowski).
 
  - Strengthen check for freq_table in devfreq (Samuel Holland).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmGBkiQSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxDZwP/1kyhVdk+FSMMwEfhn8NriOkE8drJ3nB
 Y/PWI93oPhgA7ITMwBv4ufLcxx6uYu5bctVDx3XG2lqvFC30t1fzTosJiwireRaS
 WC5p7ZTqAECxd1LiZWPjL5EzHmtbyzrz3/AxSxOEN1K66qENBd6q5QldKZylxhY3
 bawCQjabz6CLXvOjzdv8M8A7Fmd8LTcjHI5Y3/IOcDydPJqyN4/rDCoqft3/xcNB
 kwN6de73aQwB3AQYufS/VAiNN4XOOkhPwF4QfULmAlnMdCsov6YzahtMB2+oG7O4
 G3DF/OVFrONr3GPMMuMJSC6GXyFiBuW8FRva4W9HpY0MA8xVGLPUpwlpaFVaX1+c
 vAYcRBTyJvOWgRap8+q+UKTlkj37pAgHp7kRiaO1wkVnKxJB1w40OSJZO1nnsExe
 3qeCJHOJ9r+S/FsSPKCmws8vr0XQH5wPXY639Kmj9OI/t3gXGrfy3cXm9pa+gSh0
 eMyHxtCp5ItT7V2FMpYh+wn+wfe5h//sK3tESZs+h6FKwJG1hYIbG4+F3ztIgzHp
 t0rT3JXZIkY41KREGFhCMS9+wnLugOik21w9O0qVZfn/dJtDe73Kely7rY/EA3Mw
 H4aBJDD19BvbIKqaTguxJXEc9zJI737fy/Ze4rrzTDkbXU8qVmjvFoEl2i/Ef4o2
 b6aiDdz3V/CW
 =L2Jo
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These make the power management of PCI devices with ACPI companions
  more straightforwad, add support for inefficient operating performance
  points to the Energy model and make cpufreq handle them as
  appropriate, rearrange the handling of cpuidle during system PM
  transitions, update a few cpufreq drivers and intel_idle, fix assorded
  issues and clean up code in multiple places.

  Specifics:

   - Add support for inefficient operating performance points to the
     Energy Model and modify cpufreq to use them properly (Vincent
     Donnefort).

   - Rearrange the DTPM framework code to simplify it and make it easier
     to follow (Daniel Lezcano).

   - Fix power intialization in DTPM (Daniel Lezcano).

   - Add CPU load consideration when estimating the instaneous power
     consumption in DTPM (Daniel Lezcano).

   - Fix cpu->pstate.turbo_freq initialization in intel_pstate (Zhang
     Rui).

   - Make intel_pstate process HWP Guaranteed change notifications from
     the processor (Srinivas Pandruvada).

   - Fix typo in cpufreq.h (Rafael Wysocki).

   - Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).

   - Fix the parameter usage of the newly added perf-domain API (Hector
     Yuan).

   - Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
     Guenter Roeck, and Arnd Bergmann).

   - Fix kobject memory leaks in cpuidle error paths (Anel
     Orazgaliyeva).

   - Make intel_idle enable interrupts before entering C1 on some Xeon
     processor models (Artem Bityutskiy).

   - Clean up hib_wait_io() (Falla Coulibaly).

   - Fix sparse warnings in hibernation-related code (Anders Roxell).

   - Use vzalloc() and kzalloc() instead of their open-coded equivalents
     in hibernation-related code (Cai Huoqing).

   - Prevent user space from crashing the kernel by attempting to
     restore the system state from a swap partition in use (Ye Bin).

   - Do not let "syscore" devices runtime-suspend during system PM
     transitions (Rafael Wysocki).

   - Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki).

   - Pause cpuidle later and resume it earlier during system PM
     transitions (Rafael Wysocki).

   - Make system suspend code use valid_state() consistently (Rafael
     Wysocki).

   - Add support for enabling wakeup IRQs after invoking the
     ->runtime_suspend() callback and make two drivers use it (Chunfeng
     Yun).

   - Make the association of ACPI device objects with PCI devices more
     straightforward and simplify the code doing that for all devices in
     general (Rafael Wysocki).

   - Eliminate struct pci_platform_pm_ops and handle the both of its
     users (PCI and Intel MID) directly in the PCI bus code (Rafael
     Wysocki).

   - Simplify and clarify ACPI PCI device PM helpers (Rafael Wysocki).

   - Fix ordering of operations in pci_back_from_sleep() (Rafael
     Wysocki).

   - Make exynos-ppmu use hyphens in DT properties (Krzysztof
     Kozlowski).

   - Simplify parsing event-type from DT in exynos-ppmu (Krzysztof
     Kozlowski).

   - Strengthen check for freq_table in devfreq (Samuel Holland)"

* tag 'pm-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (49 commits)
  cpufreq: Fix parameter in parse_perf_domain()
  usb: mtu3: enable wake-up interrupt after runtime_suspend called
  usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called
  PM / wakeirq: support enabling wake-up irq after runtime_suspend called
  PM / devfreq: Strengthen check for freq_table
  devfreq: exynos-ppmu: simplify parsing event-type from DT
  devfreq: exynos-ppmu: use node names with hyphens
  cpufreq: intel_pstate: Fix cpu->pstate.turbo_freq initialization
  PM: suspend: Use valid_state() consistently
  PM: sleep: Pause cpuidle later and resume it earlier during system transitions
  PM: suspend: Do not pause cpuidle in the suspend-to-idle path
  PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions
  PM: hibernate: Get block device exclusively in swsusp_check()
  powercap/drivers/dtpm: Fix power limit initialization
  powercap/drivers/dtpm: Scale the power with the load
  powercap/drivers/dtpm: Use container_of instead of a private data field
  powercap/drivers/dtpm: Simplify the dtpm table
  powercap/drivers/dtpm: Encapsulate even more the code
  PM: hibernate: swap: Use vzalloc() and kzalloc()
  PM: hibernate: fix sparse warnings
  ...
2021-11-02 16:04:28 -07:00
Rafael J. Wysocki
bf56b90797 Merge branches 'pm-em' and 'powercap'
Merge Energy Model and power capping updates for 5.16-rc1:

 - Add support for inefficient operating performance points to the
   Energy Model and modify cpufreq to use them properly (Vincent
   Donnefort).

 - Rearrange the DTPM framework code to simplify it and make it easier
   to follow (Daniel Lezcano).

 - Fix power intialization in DTPM (Daniel Lezcano).

 - Add CPU load consideration when estimating the instaneous power
   consumption in DTPM (Daniel Lezcano).

* pm-em:
  cpufreq: mediatek-hw: Fix cpufreq_table_find_index_dl() call
  PM: EM: Mark inefficiencies in CPUFreq
  cpufreq: Use CPUFREQ_RELATION_E in DVFS governors
  cpufreq: Introducing CPUFREQ_RELATION_E
  cpufreq: Add an interface to mark inefficient frequencies
  cpufreq: Make policy min/max hard requirements
  PM: EM: Allow skipping inefficient states
  PM: EM: Extend em_perf_domain with a flag field
  PM: EM: Mark inefficient states
  PM: EM: Fix inefficient states detection

* powercap:
  powercap/drivers/dtpm: Fix power limit initialization
  powercap/drivers/dtpm: Scale the power with the load
  powercap/drivers/dtpm: Use container_of instead of a private data field
  powercap/drivers/dtpm: Simplify the dtpm table
  powercap/drivers/dtpm: Encapsulate even more the code
2021-11-02 19:31:28 +01:00
Rafael J. Wysocki
9f6abfcd67 PM: suspend: Use valid_state() consistently
Make valid_state() check if the ->enter callback is present in
suspend_ops (only PM_SUSPEND_TO_IDLE can be valid otherwise) and
make sleep_state_supported() call valid_state() consistently to
validate the states other than PM_SUSPEND_TO_IDLE.

While at it, clean up the comment in valid_state().

No expected functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-26 15:52:58 +02:00
Rafael J. Wysocki
23f62d7ab2 PM: sleep: Pause cpuidle later and resume it earlier during system transitions
Commit 8651f97bd9 ("PM / cpuidle: System resume hang fix with
cpuidle") that introduced cpuidle pausing during system suspend
did that to work around a platform firmware issue causing systems
to hang during resume if CPUs were allowed to enter idle states
in the system suspend and resume code paths.

However, pausing cpuidle before the last phase of suspending
devices is the source of an otherwise arbitrary difference between
the suspend-to-idle path and other system suspend variants, so it is
cleaner to do that later, before taking secondary CPUs offline (it
is still safer to take secondary CPUs offline with cpuidle paused,
though).

Modify the code accordingly, but in order to avoid code duplication,
introduce new wrapper functions, pm_sleep_disable_secondary_cpus()
and pm_sleep_enable_secondary_cpus(), to combine cpuidle_pause()
and cpuidle_resume(), respectively, with the handling of secondary
CPUs during system-wide transitions to sleep states.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-26 15:52:07 +02:00
Rafael J. Wysocki
8d89835b04 PM: suspend: Do not pause cpuidle in the suspend-to-idle path
It is pointless to pause cpuidle in the suspend-to-idle path,
because it is going to be resumed in the same path later and
pausing it does not serve any particular purpose in that case.

Rework the code to avoid doing that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-26 15:52:07 +02:00
Ye Bin
39fbef4b0f PM: hibernate: Get block device exclusively in swsusp_check()
The following kernel crash can be triggered:

[   89.266592] ------------[ cut here ]------------
[   89.267427] kernel BUG at fs/buffer.c:3020!
[   89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI
[   89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20
[   89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0
[   89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246
[   89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612
[   89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498
[   89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294
[   89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800
[   89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000
[   89.284342] FS:  0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000
[   89.285711] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0
[   89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   89.290368] Call Trace:
[   89.290842]  write_mmp_block+0x2ca/0x510
[   89.292218]  kmmpd+0x433/0x9a0
[   89.294902]  kthread+0x2dd/0x3e0
[   89.296268]  ret_from_fork+0x22/0x30
[   89.296906] Modules linked in:

by running the following commands:

 1. mkfs.ext4 -O mmp  /dev/sda -b 1024
 2. mount /dev/sda /home/test
 3. echo "/dev/sda" > /sys/power/resume

That happens because swsusp_check() calls set_blocksize() on the
target partition which confuses the file system:

       Thread1                       Thread2
mount /dev/sda /home/test
get s_mmp_bh  --> has mapped flag
start kmmpd thread
				echo "/dev/sda" > /sys/power/resume
				  resume_store
				    software_resume
				      swsusp_check
				        set_blocksize
					  truncate_inode_pages_range
					    truncate_cleanup_page
					      block_invalidatepage
					        discard_buffer --> clean mapped flag
write_mmp_block
  submit_bh
    submit_bh_wbc
      BUG_ON(!buffer_mapped(bh))

To address this issue, modify swsusp_check() to open the target block
device with exclusive access.

Signed-off-by: Ye Bin <yebin10@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-21 19:38:32 +02:00
Cai Huoqing
9437e39377 PM: hibernate: swap: Use vzalloc() and kzalloc()
Replace vmalloc()/memset() with vzalloc() and kmalloc()/memset() with
kzalloc() to simplify the code.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-21 13:04:57 +02:00
Anders Roxell
01de5fcd8b PM: hibernate: fix sparse warnings
When building the kernel with sparse enabled 'C=1' the following
warnings shows up:

kernel/power/swap.c:390:29: warning: incorrect type in assignment (different base types)
kernel/power/swap.c:390:29:    expected int ret
kernel/power/swap.c:390:29:    got restricted blk_status_t

This is due to function hib_wait_io() returns a 'blk_status_t' which is
a bitwise u8. Commit 5416da01ff ("PM: hibernate: Remove
blk_status_to_errno in hib_wait_io") seemed to have mixed up the return
type. However, the 4e4cbee93d ("block: switch bios to blk_status_t")
actually broke the behaviour by returning the wrong type.

Rework so function hib_wait_io() returns a 'int' instead of
'blk_status_t' and make sure to call function
blk_status_to_errno(hb->error)' when returning from function
hib_wait_io() a int gets returned.

Fixes: 4e4cbee93d ("block: switch bios to blk_status_t")
Fixes: 5416da01ff ("PM: hibernate: Remove blk_status_to_errno in hib_wait_io")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-21 12:45:18 +02:00
Imran Khan
55df0933be workqueue: Introduce show_one_worker_pool and show_one_workqueue.
Currently show_workqueue_state shows the state of all workqueues and of
all worker pools. In certain cases we may need to dump state of only a
specific workqueue or worker pool. For example in destroy_workqueue we
only need to show state of the workqueue which is getting destroyed.

So rename show_workqueue_state to show_all_workqueues(to signify it
dumps state of all busy workqueues) and divide it into more granular
functions (show_one_workqueue and show_one_worker_pool), that would show
states of individual workqueues and worker pools and can be used in
cases such as the one mentioned above.

Also, as mentioned earlier, make destroy_workqueue dump data pertaining
to only the workqueue that is being destroyed and make user(s) of
earlier interface(show_workqueue_state), use new interface
(show_all_workqueues).

Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2021-10-20 06:19:03 -10:00
Rafael J. Wysocki
c1bfc59818 Revert "PM: sleep: Do not assume that "mem" is always present"
Revert commit bfcc1e67ff ("PM: sleep: Do not assume that "mem" is
always present"), because it breaks compatibility with user space
utilities assuming that "mem" will always be present in
/sys/power/state.

Fixes: bfcc1e67ff ("PM: sleep: Do not assume that "mem" is always present")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-19 20:59:02 +02:00
Vincent Donnefort
e458716a92 PM: EM: Mark inefficiencies in CPUFreq
The Energy Model has a 1:1 mapping between OPPs and performance states
(em_perf_state). If a CPUFreq driver registers an Energy Model,
inefficiencies found by the latter can be applied to CPUFreq.

Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05 16:33:05 +02:00
Vincent Donnefort
8354eb9eb3 PM: EM: Allow skipping inefficient states
The new performance domain flag EM_PERF_DOMAIN_SKIP_INEFFICIENCIES allows
to not take into account inefficient states when estimating energy
consumption. This intends to let the Energy Model know that CPUFreq itself
will skip inefficiencies and such states don't need to be part of the
estimation anymore.

Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05 16:33:05 +02:00
Vincent Donnefort
88f7a89560 PM: EM: Extend em_perf_domain with a flag field
Merge the current "milliwatts" option into a "flag" field. This intends to
prepare the extension of this structure for inefficient states support in
the Energy Model.

Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05 16:33:05 +02:00
Vincent Donnefort
c8ed99533d PM: EM: Mark inefficient states
Some SoCs, such as the sd855 have OPPs within the same performance domain,
whose cost is higher than others with a higher frequency. Even though
those OPPs are interesting from a cooling perspective, it makes no sense
to use them when the device can run at full capacity. Those OPPs handicap
the performance domain, when choosing the most energy-efficient CPU and
are wasting energy. They are inefficient.

Hence, add support for such OPPs to the Energy Model. The table can now
be read skipping inefficient performance states (and by extension,
inefficient OPPs).

Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05 16:33:05 +02:00
Vincent Donnefort
aa1a43262a PM: EM: Fix inefficient states detection
Currently, a debug message is printed if an inefficient state is detected
in the Energy Model. Unfortunately, it won't detect if the first state is
inefficient or if two successive states are. Fix this behavior.

Fixes: 27871f7a8a (PM: Introduce an Energy Model management framework)
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05 16:33:05 +02:00
Falla Coulibaly
5416da01ff PM: hibernate: Remove blk_status_to_errno in hib_wait_io
blk_status_to_errno doesn't appear to perform extra work besides
converting blk_status_t to integer. This patch removes that unnecessary
conversion as the return type of the function is blk_status_t.

Signed-off-by: Falla Coulibaly <fallacoulibalyz@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-09-15 14:17:14 +02:00
Florian Fainelli
bfcc1e67ff PM: sleep: Do not assume that "mem" is always present
An implementation of suspend_ops is allowed to reject the PM_SUSPEND_MEM
suspend type from its ->valid() callback, we should not assume that it
is always present as this is not a correct reflection of what a firmware
interface may support.

Fixes: 406e79385f ("PM / sleep: System sleep state selection interface rework")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-09-15 14:04:04 +02:00
Rafael J. Wysocki
fe583359dd Merge branches 'pm-pci', 'pm-sleep', 'pm-domains' and 'powercap'
* pm-pci:
  PCI: PM: Enable PME if it can be signaled from D3cold
  PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
  PCI: Use pci_update_current_state() in pci_enable_device_flags()

* pm-sleep:
  PM: sleep: unmark 'state' functions as kernel-doc
  PM: sleep: check RTC features instead of ops in suspend_test
  PM: sleep: s2idle: Replace deprecated CPU-hotplug functions

* pm-domains:
  PM: domains: Fix domain attach for CONFIG_PM_OPP=n
  arm64: dts: sc7180: Add required-opps for i2c
  PM: domains: Add support for 'required-opps' to set default perf state
  opp: Don't print an error if required-opps is missing

* powercap:
  powercap: Add Power Limit4 support for Alder Lake SoC
  powercap: intel_rapl: Replace deprecated CPU-hotplug functions
2021-08-30 19:25:42 +02:00
Randy Dunlap
dbcfa7156f PM: sleep: unmark 'state' functions as kernel-doc
Fix kernel-doc warnings in kernel/power/main.c by unmarking the
comment block as kernel-doc notation. This eliminates the following
kernel-doc warnings:

kernel/power/main.c:593: warning: expecting prototype for state(). Prototype was for state_show() instead
kernel/power/main.c:593: warning: Function parameter or member 'kobj' not described in 'state_show'
kernel/power/main.c:593: warning: Function parameter or member 'attr' not described in 'state_show'
kernel/power/main.c:593: warning: Function parameter or member 'buf' not described in 'state_show'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-16 18:49:39 +02:00
Lukasz Luba
7fcc17d0cb PM: EM: Increase energy calculation precision
The Energy Model (EM) provides useful information about device power in
each performance state to other subsystems like: Energy Aware Scheduler
(EAS). The energy calculation in EAS does arithmetic operation based on
the EM em_cpu_energy(). Current implementation of that function uses
em_perf_state::cost as a pre-computed cost coefficient equal to:
cost = power * max_frequency / frequency.
The 'power' is expressed in milli-Watts (or in abstract scale).

There are corner cases when the EAS energy calculation for two Performance
Domains (PDs) return the same value. The EAS compares these values to
choose smaller one. It might happen that this values are equal due to
rounding error. In such scenario, we need better resolution, e.g. 1000
times better. To provide this possibility increase the resolution in the
em_perf_state::cost for 64-bit architectures. The cost of increasing
resolution on 32-bit is pretty high (64-bit division) and is not justified
since there are no new 32bit big.LITTLE EAS systems expected which would
benefit from this higher resolution.

This patch allows to avoid the rounding to milli-Watt errors, which might
occur in EAS energy estimation for each PD. The rounding error is common
for small tasks which have small utilization value.

There are two places in the code where it makes a difference:
1. In the find_energy_efficient_cpu() where we are searching for
best_delta. We might suffer there when two PDs return the same result,
like in the example below.

Scenario:
Low utilized system e.g. ~200 sum_util for PD0 and ~220 for PD1. There
are quite a few small tasks ~10-15 util. These tasks would suffer for
the rounding error. These utilization values are typical when running games
on Android. One of our partners has reported 5..10mA less battery drain
when running with increased resolution.

Some details:
We have two PDs: PD0 (big) and PD1 (little)
Let's compare w/o patch set ('old') and w/ patch set ('new')
We are comparing energy w/ task and w/o task placed in the PDs

a) 'old' w/o patch set, PD0
task_util = 13
cost = 480
sum_util_w/o_task = 215
sum_util_w_task = 228
scale_cpu = 1024
energy_w/o_task = 480 * 215 / 1024 = 100.78 => 100
energy_w_task = 480 * 228 / 1024 = 106.87 => 106
energy_diff = 106 - 100 = 6
(this is equal to 'old' PD1's energy_diff in 'c)')

b) 'new' w/ patch set, PD0
task_util = 13
cost = 480 * 1000 = 480000
sum_util_w/o_task = 215
sum_util_w_task = 228
energy_w/o_task = 480000 * 215 / 1024 = 100781
energy_w_task = 480000 * 228 / 1024  = 106875
energy_diff = 106875 - 100781 = 6094
(this is not equal to 'new' PD1's energy_diff in 'd)')

c) 'old' w/o patch set, PD1
task_util = 13
cost = 160
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160 * 283 / 355 = 127.55 => 127
energy_w_task = 160 * 296 / 355 = 133.41 => 133
energy_diff = 133 - 127 = 6
(this is equal to 'old' PD0's energy_diff in 'a)')

d) 'new' w/ patch set, PD1
task_util = 13
cost = 160 * 1000 = 160000
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160000 * 283 / 355 = 127549
energy_w_task = 160000 * 296 / 355 =   133408
energy_diff = 133408 - 127549 = 5859
(this is not equal to 'new' PD0's energy_diff in 'b)')

2. Difference in the 6% energy margin filter at the end of
find_energy_efficient_cpu(). With this patch the margin comparison also
has better resolution, so it's possible to have better task placement
thanks to that.

Fixes: 27871f7a8a ("PM: Introduce an Energy Model management framework")
Reported-by: CCJ Yeh <CCj.Yeh@mediatek.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-06 15:30:42 +02:00
Alexandre Belloni
4fac49fd0a PM: sleep: check RTC features instead of ops in suspend_test
Test RTC_FEATURE_ALARM instead of relying on ops->set_alarm to know whether
alarms are available.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-04 20:23:05 +02:00
Sebastian Andrzej Siewior
d2c8cce647 PM: sleep: s2idle: Replace deprecated CPU-hotplug functions
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-04 20:18:13 +02:00
Mike Rapoport
9a436f8ff6 PM: hibernate: disable when there are active secretmem users
It is unsafe to allow saving of secretmem areas to the hibernation
snapshot as they would be visible after the resume and this essentially
will defeat the purpose of secret memory mappings.

Prevent hibernation whenever there are active secret memory users.

Link: https://lkml.kernel.org/r/20210518072034.31572-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Will Deacon <will@kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 11:48:21 -07:00
Zhen Lei
480f0de68c PM: hibernate: remove leading spaces before tabs
1) Run the following command to find and remove the leading spaces
    before tabs:
    $ find kernel/power/ -type f | xargs sed -r -i 's/^[ ]+\t/\t/'
 2) Manually check and correct if necessary

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:52:05 +02:00
Zhen Lei
03466883a0 PM: sleep: remove trailing spaces and tabs
Run the following command to find and remove the trailing spaces and tabs:

$ find kernel/power/ -type f | xargs sed -r -i 's/[ \t]+$//'

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:49:09 +02:00
Zhen Lei
6be2408a1e PM: hibernate: fix spelling mistakes
Fix some spelling mistakes in comments:

corresonds ==> corresponds
alocated ==> allocated
unitialized ==> uninitialized
Deompression ==> Decompression

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-24 16:17:07 +02:00
Lu Jialin
e4b2897ae1 PM: sleep: fix typos in comments
Change "occured" to "occurred" in kernel/power/autosleep.c.

Change "consiting" to "consisting" in kernel/power/snapshot.c.

Change "avaiable" to "available" in kernel/power/swap.c.

No functionality changed.

Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08 19:37:21 +02:00
Lukasz Luba
fb9d62b27a PM: EM: postpone creating the debugfs dir till fs_initcall
The debugfs directory '/sys/kernel/debug/energy_model' is needed before
the Energy Model registration can happen. With the recent change in
debugfs subsystem it's not allowed to create this directory at early
stage (core_initcall). Thus creating this directory would fail.

Postpone the creation of the EM debug dir to later stage: fs_initcall.

It should be safe since all clients: CPUFreq drivers, Devfreq drivers
will be initialized in later stages.

The custom debug log below prints the time of creation the EM debug dir
at fs_initcall and successful registration of EMs at later stages.

[    1.505717] energy_model: creating rootdir
[    3.698307] cpu cpu0: EM: created perf domain
[    3.709022] cpu cpu1: EM: created perf domain

Fixes: 56348560d4 ("debugfs: do not attempt to create a new file before the filesystem is initalized")
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-23 19:53:48 +01:00
Rafael J. Wysocki
a9a939cb34 Merge branches 'powercap' and 'pm-misc'
* powercap:
  powercap: intel_rapl: Use topology interface in rapl_init_domains()
  powercap: intel_rapl: Use topology interface in rapl_add_package()
  powercap/intel_rapl: add support for AlderLake Mobile
  powercap/drivers/dtpm: Fix size of object being allocated
  powercap/drivers/dtpm: Fix an IS_ERR() vs NULL check
  powercap/drivers/dtpm: Fix some missing unlock bugs
  powercap/drivers/dtpm: Fix a double shift bug
  powercap/drivers/dtpm: Fix __udivdi3 and __aeabi_uldivmod unresolved symbols
  powercap/drivers/dtpm: Add CPU energy model based support
  powercap/drivers/dtpm: Add API for dynamic thermal power management
  Documentation/powercap/dtpm: Add documentation for dtpm
  units: Add Watt units

* pm-misc:
  PM: Kconfig: remove unneeded "default n" options
  PM: EM: update Kconfig description and drop "default n" option
2021-02-15 18:50:01 +01:00
Rikard Falkeborn
1556057413 PM: sleep: Constify static struct attribute_group
The only usage of suspend_attr_group is to put its address in an
array of pointers to const attribute_group structs.

Make it const to allow the compiler to put it into read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-12 16:46:59 +01:00
Lukasz Luba
c4cc3141b6 PM: Kconfig: remove unneeded "default n" options
Remove "default n" options. If the "default" line is removed, it
defaults to 'n'.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-12 16:43:23 +01:00
Lukasz Luba
3af2f0aa2e PM: EM: update Kconfig description and drop "default n" option
Energy Model supports now other devices like GPUs, DSPs, not only CPUs.
Thus, update the description in the config option. Remove also unneeded
"default n". If the "default" line is removed, it defaults to 'n'.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-12 16:43:23 +01:00
Zqiang
ccf7ce46ab PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads()
Because PF_KTHREAD is set for all wq worker threads, it is
not necessary to check PF_WQ_WORKER in addition to it in
thaw_kernel_threads(), so stop doing that.

Signed-off-by: Zqiang <qiang.zhang@windriver.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:20:17 +01:00
Laurent Badel
fef9c8d28e PM: hibernate: flush swap writer after marking
Flush the swap writer after, not before, marking the files, to ensure the
signature is properly written.

Fixes: 6f612af578 ("PM / Hibernate: Group swap ops")
Signed-off-by: Laurent Badel <laurentbadel@eaton.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25 18:52:30 +01:00
Linus Torvalds
b4ec805464 Power management updates for 5.11-rc1
- Use local_clock() instead of jiffies in the cpufreq statistics to
    improve accuracy (Viresh Kumar).
 
  - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
    drivers (Viresh Kumar).
 
  - Clean up the cpufreq core, the intel_pstate driver and the
    schedutil cpufreq governor (Rafael Wysocki).
 
  - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
    drivers (Yangtao Li, Qinglang Miao).
 
  - Fix cpufreq_online() to return error codes instead of success (0)
    in all cases when it fails (Wang ShaoBo).
 
  - Add mt8167 support to the mediatek cpufreq driver and blacklist
    mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
 
  - Modify the tegra194 cpufreq driver to always return values from
    the frequency table as the current frequency and clean up that
    driver (Sumit Gupta, Jon Hunter).
 
  - Modify the arm_scmi cpufreq driver to allow it to discover the
    power scale present in the performance protocol and provide this
    information to the Energy Model (Lukasz Luba).
 
  - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
    Rohár).
 
  - Clean up the CPPC cpufreq driver (Ionela Voinescu).
 
  - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
    Bergmann).
 
  - Rework the poling interval selection for the polling state in
    cpuidle (Mel Gorman).
 
  - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
    driver (Ulf Hansson).
 
  - Modify the OPP framework to support empty (node-less) OPP tables
    in DT for passing dependency information (Nicola Mazzucato).
 
  - Fix potential lockdep issue in the OPP core and clean up the OPP
    core (Viresh Kumar).
 
  - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
    update its users accordingly (Viresh Kumar).
 
  - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
 
  - Add support for governor feature flags to devfreq, make devfreq
    sysfs file permissions depend on the governor and clean up the
    devfreq core (Chanwoo Choi).
 
  - Clean up the tegra20 devfreq driver and deprecate it to allow
    another driver based on EMC_STAT to be used instead of it (Dmitry
    Osipenko).
 
  - Add interconnect support to the tegra30 devfreq driver, allow it
    to take the interconnect and OPP information from DT and clean it
    up ((Dmitry Osipenko).
 
  - Add interconnect support to the exynos-bus devfreq driver along
    with interconnect properties documentation (Sylwester Nawrocki).
 
  - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
    capping driver (Victor Ding, Kim Phillips).
 
  - Fix handling of overly long constraint names in the powercap
    framework (Lukasz Luba).
 
  - Fix the wakeup configuration handling for bridges in the ACPI
    device power management core (Rafael Wysocki).
 
  - Add support for using an abstract scale for power units in the
    Energy Model (EM) and document it (Lukasz Luba).
 
  - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
    Kondeti).
 
  - Modify the generic power domains (genpd) framwework to support
    suspend-to-idle (Ulf Hansson).
 
  - Fix creation of debugfs nodes in genpd (Thierry Strudel).
 
  - Clean up genpd (Lina Iyer).
 
  - Clean up the core system-wide suspend code and make it print
    driver flags for devices with debug enabled (Alex Shi, Patrice
    Chotard, Chen Yu).
 
  - Modify the ACPI system reboot code to make it prepare for system
    power off to avoid confusing the platform firmware (Kai-Heng Feng).
 
  - Update the pm-graph (multiple changes, mostly usability-related)
    and cpupower (online and offline CPU information support) PM
    utilities (Todd Brandt, Brahadambal Srinivasan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl/Y8mcSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxjY4QAKsNFJeEtjGCxq7MxQIML3QLAsdJM9of
 9kkY9skMEw4v1TRmyy7sW9jZW2pLSRcLJwWRKWu4143qUS3YUp2DQ0lqX4WyXoWu
 BhnkhkMUl6iCeBO8CWnt8zsTuqSa20A13sL9LyqN1+7OZKHD8StbT4hKjBncdNNN
 4aDj+1uAPyOgj2iCUZuHQ8DtpBvOLjgTh367vbhbufjeJ//8/9+R7s4Xzrj7wtmv
 JlE0LDgvge9QeGTpjhxQJzn0q2/H5fg9jbmjPXUfbHJNuyKhrqnmjGyrN5m256JI
 8DqGqQtJpmFp7Ihrur3uKTk3gWO05YwJ1FdeEooAKEjEMObm5xuYhKVRoDhmlJAu
 G6ui+OAUvNR0FffJtbzvWe/pLovLGOEOHdvTrZxUF8Abo6br3untTm8rKTi1fhaF
 wWndSMw0apGsPzCx5T+bE7AbJz2QHFpLhaVAutenuCzNI8xoMlxNKEzsaVz/+FqL
 Pq/PdFaM4vNlMbv7hkb/fujkCs/v3EcX2ihzvt7I2o8dBS0D1X8A4mnuWJmiGslw
 1ftbJ6M9XacwkPBTHPgeXxJh2C1yxxe5VQ9Z5fWWi7sPOUeJnUwxKaluv+coFndQ
 sO6JxsPQ4hQihg8yOxLEkL6Wn68sZlmp+u2Oj+TPFAsAGANIA8rJlBPo1ppJWvdQ
 j1OCIc/qzwpH
 =BVdX
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update cpufreq (core and drivers), cpuidle (polling state
  implementation and the PSCI driver), the OPP (operating performance
  points) framework, devfreq (core and drivers), the power capping RAPL
  (Running Average Power Limit) driver, the Energy Model support, the
  generic power domains (genpd) framework, the ACPI device power
  management, the core system-wide suspend code and power management
  utilities.

  Specifics:

   - Use local_clock() instead of jiffies in the cpufreq statistics to
     improve accuracy (Viresh Kumar).

   - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
     drivers (Viresh Kumar).

   - Clean up the cpufreq core, the intel_pstate driver and the
     schedutil cpufreq governor (Rafael Wysocki).

   - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
     drivers (Yangtao Li, Qinglang Miao).

   - Fix cpufreq_online() to return error codes instead of success (0)
     in all cases when it fails (Wang ShaoBo).

   - Add mt8167 support to the mediatek cpufreq driver and blacklist
     mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).

   - Modify the tegra194 cpufreq driver to always return values from the
     frequency table as the current frequency and clean up that driver
     (Sumit Gupta, Jon Hunter).

   - Modify the arm_scmi cpufreq driver to allow it to discover the
     power scale present in the performance protocol and provide this
     information to the Energy Model (Lukasz Luba).

   - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
     Rohár).

   - Clean up the CPPC cpufreq driver (Ionela Voinescu).

   - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
     Bergmann).

   - Rework the poling interval selection for the polling state in
     cpuidle (Mel Gorman).

   - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
     (Ulf Hansson).

   - Modify the OPP framework to support empty (node-less) OPP tables in
     DT for passing dependency information (Nicola Mazzucato).

   - Fix potential lockdep issue in the OPP core and clean up the OPP
     core (Viresh Kumar).

   - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
     update its users accordingly (Viresh Kumar).

   - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).

   - Add support for governor feature flags to devfreq, make devfreq
     sysfs file permissions depend on the governor and clean up the
     devfreq core (Chanwoo Choi).

   - Clean up the tegra20 devfreq driver and deprecate it to allow
     another driver based on EMC_STAT to be used instead of it (Dmitry
     Osipenko).

   - Add interconnect support to the tegra30 devfreq driver, allow it to
     take the interconnect and OPP information from DT and clean it up
     (Dmitry Osipenko).

   - Add interconnect support to the exynos-bus devfreq driver along
     with interconnect properties documentation (Sylwester Nawrocki).

   - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
     capping driver (Victor Ding, Kim Phillips).

   - Fix handling of overly long constraint names in the powercap
     framework (Lukasz Luba).

   - Fix the wakeup configuration handling for bridges in the ACPI
     device power management core (Rafael Wysocki).

   - Add support for using an abstract scale for power units in the
     Energy Model (EM) and document it (Lukasz Luba).

   - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
     Kondeti).

   - Modify the generic power domains (genpd) framwework to support
     suspend-to-idle (Ulf Hansson).

   - Fix creation of debugfs nodes in genpd (Thierry Strudel).

   - Clean up genpd (Lina Iyer).

   - Clean up the core system-wide suspend code and make it print driver
     flags for devices with debug enabled (Alex Shi, Patrice Chotard,
     Chen Yu).

   - Modify the ACPI system reboot code to make it prepare for system
     power off to avoid confusing the platform firmware (Kai-Heng Feng).

   - Update the pm-graph (multiple changes, mostly usability-related)
     and cpupower (online and offline CPU information support) PM
     utilities (Todd Brandt, Brahadambal Srinivasan)"

* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  PM: domains: create debugfs nodes when adding power domains
  opp: of: Allow empty opp-table with opp-shared
  dt-bindings: opp: Allow empty OPP tables
  media: venus: dev_pm_opp_put_*() accepts NULL argument
  drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
  drm/lima: dev_pm_opp_put_*() accepts NULL argument
  PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
  opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
  opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
  cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
  opp: Reduce the size of critical section in _opp_kref_release()
  PM / EM: Micro optimization in em_cpu_energy
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  ...
2020-12-15 16:30:31 -08:00
Vlastimil Babka
03b6c9a3e8 kernel/power: allow hibernation with page_poison sanity checking
Page poisoning used to be incompatible with hibernation, as the state of
poisoned pages was lost after resume, thus enabling CONFIG_HIBERNATION
forces CONFIG_PAGE_POISONING_NO_SANITY.  For the same reason, the
poisoning with zeroes variant CONFIG_PAGE_POISONING_ZERO used to disable
hibernation.  The latter restriction was removed by commit 1ad1410f63
("PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO") and
similarly for init_on_free by commit 18451f9f9e ("PM: hibernate: fix
crashes with init_on_free=1") by making sure free pages are cleared after
resume.

We can use the same mechanism to instead poison free pages with
PAGE_POISON after resume.  This covers both zero and 0xAA patterns.  Thus
we can remove the Kconfig restriction that disables page poison sanity
checking when hibernation is enabled.

Link: https://lkml.kernel.org/r/20201113104033.22907-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[hibernation]
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Mateusz Nosek <mateusznosek0@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:46 -08:00
Mike Rapoport
2abf962a8d PM: hibernate: make direct map manipulations more explicit
When DEBUG_PAGEALLOC or ARCH_HAS_SET_DIRECT_MAP is enabled a page may be
not present in the direct map and has to be explicitly mapped before it
could be copied.

Introduce hibernate_map_page() and hibernation_unmap_page() that will
explicitly use set_direct_map_{default,invalid}_noflush() for
ARCH_HAS_SET_DIRECT_MAP case and debug_pagealloc_{map,unmap}_pages() for
DEBUG_PAGEALLOC case.

The remapping of the pages in safe_copy_page() presumes that it only
changes protection bits in an existing PTE and so it is safe to ignore
return value of set_direct_map_{default,invalid}_noflush().

Still, add a pr_warn() so that future changes in set_memory APIs will not
silently break hibernation.

Link: https://lkml.kernel.org/r/20201109192128.960-3-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Rafael J. Wysocki
42b4ca04cb Merge branches 'pm-sleep', 'pm-acpi', 'pm-domains' and 'powercap'
* pm-sleep:
  PM: sleep: Add dev_wakeup_path() helper
  PM / suspend: fix kernel-doc markup
  PM: sleep: Print driver flags for all devices during suspend/resume

* pm-acpi:
  PM: ACPI: Refresh wakeup device power configuration every time
  PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
  PM: ACPI: reboot: Use S5 for reboot

* pm-domains:
  PM: domains: create debugfs nodes when adding power domains
  PM: domains: replace -ENOTSUPP with -EOPNOTSUPP

* powercap:
  powercap: Adjust printing the constraint name with new line
  powercap: RAPL: Add AMD Fam19h RAPL support
  powercap: Add AMD Fam17h RAPL support
  powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
  x86/msr-index: sort AMD RAPL MSRs by address
2020-12-15 15:26:14 +01:00
Alex Shi
ab150c3f80 PM / suspend: fix kernel-doc markup
Add parameter explanation to fix kernel-doc marks:

kernel/power/suspend.c:233: warning: Function parameter or member
'state' not described in 'suspend_valid_only_mem'
kernel/power/suspend.c:344: warning: Function parameter or member
'state' not described in 'suspend_prepare'

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
[ rjw: Change the proposed parameter descriptions. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-23 18:24:53 +01:00
Lukasz Luba
f2c90b12e7 PM: EM: update the comments related to power scale
The Energy Model supports power values expressed in milli-Watts or in an
'abstract scale'. Update the related comments is the code to reflect that
state.

Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-10 20:29:28 +01:00
Lukasz Luba
c250d50fe2 PM: EM: Add a flag indicating units of power values in Energy Model
There are different platforms and devices which might use different scale
for the power values. Kernel sub-systems might need to check if all
Energy Model (EM) devices are using the same scale. Address that issue and
store the information inside EM for each device. Thanks to that they can
be easily compared and proper action triggered.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-10 20:22:00 +01:00
Jackie Zamow
4d4ce8053b PM: sleep: fix typo in kernel/power/process.c
Fix a typo in a comment in freeze_processes().

Signed-off-by: Jackie Zamow <jackie.zamow@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-27 19:11:44 +01:00
Randy Dunlap
7b7b8a2c95 kernel/: fix repeated words in comments
Fix multiple occurrences of duplicated words in kernel/.

Fix one typo/spello on the same line as a duplicate word.  Change one
instance of "the the" to "that the".  Otherwise just drop one of the
repeated words.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/98202fa6-8919-ef63-9efe-c0fad5ca7af1@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:19 -07:00
Linus Torvalds
0b8417c141 Power management updates for 5.10-rc1
- Rework cpufreq statistics collection to allow it to take place
    when fast frequency switching is enabled in the governor (Viresh
    Kumar).
 
  - Make the cpufreq core set the frequency scale on behalf of the
    driver and update several cpufreq drivers accordingly (Ionela
    Voinescu, Valentin Schneider).
 
  - Add new hardware support to the STI and qcom cpufreq drivers and
    improve them (Alain Volmat, Manivannan Sadhasivam).
 
  - Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
    Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
    Gerhold, Viresh Kumar).
 
  - Fix several assorted issues in the operating performance points
    (OPP) framework (Stephan Gerhold, Viresh Kumar).
 
  - Allow devfreq drivers to fetch devfreq instances by DT enumeration
    instead of using explicit phandles and modify the devfreq core
    code to support driver-specific devfreq DT bindings (Leonard
    Crestez, Chanwoo Choi).
 
  - Improve initial hardware resetting in the tegra30 devfreq driver
    and clean up the tegra cpuidle driver (Dmitry Osipenko).
 
  - Update the cpuidle core to collect state entry rejection
    statistics and expose them via sysfs (Lina Iyer).
 
  - Improve the ACPI _CST code handling diagnostics (Chen Yu).
 
  - Update the PSCI cpuidle driver to allow the PM domain
    initialization to occur in the OSI mode as well as in the PC
    mode (Ulf Hansson).
 
  - Rework the generic power domains (genpd) core code to allow
    domain power off transition to be aborted in the absence of the
    "power off" domain callback (Ulf Hansson).
 
  - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
    Wysocki).
 
  - Fix the handling of timer_expires in the PM-runtime framework on
    32-bit systems and the handling of device links in it (Grygorii
    Strashko, Xiang Chen).
 
  - Add IO requests batching support to the hibernate image saving and
    reading code and drop a bogus get_gendisk() from there (Xiaoyi
    Chen, Christoph Hellwig).
 
  - Allow PCIe ports to be put into the D3cold power state if they
    are power-manageable via ACPI (Lukas Wunner).
 
  - Add missing header file include to a power capping driver (Pujin
    Shi).
 
  - Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
 
  - Kevin Hilman steps down as designated reviwer of adaptive voltage
    scaling (AVS) driverrs (Kevin Hilman).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl+F4A4SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxX6QP/iELq9/OsH0aJdDQlY9tnh2Oa13+HB/Y
 w1e6W+ZR/YjPgUpMVARwRLKf/gn7dUEwRDHVpGvDOyun+HACCPHB2hg8iktbxdVl
 NFAVGZCCRezXqz3opL1hl8C3Dh0CqUPUjWXGMr+Lw2TZQKT+hx9K1dm9Epe3ivyT
 RlVH/wifei80cFRcUUj7DI5KLCAyk+uKkZIFnZHAGKK6qOHMqRL5sDZsMUwWpd2i
 AdghABjePbaiLTAoZuUsJINAGY4DnIt6ASRdMJ4iksiD6pFITwFs0HSOPe7hZLlv
 zbwDPI5+TIkrOy9/aWoMaEIH1OQiFN/O++Slvdjn7gMsRgoW4d300ru4Jo1pOHxb
 5twxagCCqlOf4YAaSrMCH4HT+c6fOWoGj2AKzX3DMJyO3/WN+8XNvUxKtC5Px1u+
 pWRASjfQMO2j6nNjTCTwDJdYzggiKa54rYH2k7svX7XnTIAf+2E1gv8b4rMTgQrZ
 0rq9kULYlhgk3EYjd/DndkvxunRlmiqhzrYB4jc9eDSPNzB8FZEbw1ZMRQTFfjK0
 kp0vaEpTJ7JfKSCfluB4UmTuQoGogLl0xbzc+2NNIpwdNmrH2Srvq6wbj35jEDTU
 tqsTsBP+XZFOWyFOw/L2J47LTOp0TJnz8z4aycLfrmdNUVnXJoU1sXgFlDzETMgT
 0E6cTVwLF7Zi
 =rGhy
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework the collection of cpufreq statistics to allow it to take
  place if fast frequency switching is enabled in the governor, rework
  the frequency invariance handling in the cpufreq core and drivers, add
  new hardware support to a couple of cpufreq drivers, fix a number of
  assorted issues and clean up the code all over.

  Specifics:

   - Rework cpufreq statistics collection to allow it to take place when
     fast frequency switching is enabled in the governor (Viresh Kumar).

   - Make the cpufreq core set the frequency scale on behalf of the
     driver and update several cpufreq drivers accordingly (Ionela
     Voinescu, Valentin Schneider).

   - Add new hardware support to the STI and qcom cpufreq drivers and
     improve them (Alain Volmat, Manivannan Sadhasivam).

   - Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
     Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
     Gerhold, Viresh Kumar).

   - Fix several assorted issues in the operating performance points
     (OPP) framework (Stephan Gerhold, Viresh Kumar).

   - Allow devfreq drivers to fetch devfreq instances by DT enumeration
     instead of using explicit phandles and modify the devfreq core code
     to support driver-specific devfreq DT bindings (Leonard Crestez,
     Chanwoo Choi).

   - Improve initial hardware resetting in the tegra30 devfreq driver
     and clean up the tegra cpuidle driver (Dmitry Osipenko).

   - Update the cpuidle core to collect state entry rejection statistics
     and expose them via sysfs (Lina Iyer).

   - Improve the ACPI _CST code handling diagnostics (Chen Yu).

   - Update the PSCI cpuidle driver to allow the PM domain
     initialization to occur in the OSI mode as well as in the PC mode
     (Ulf Hansson).

   - Rework the generic power domains (genpd) core code to allow domain
     power off transition to be aborted in the absence of the "power
     off" domain callback (Ulf Hansson).

   - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
     Wysocki).

   - Fix the handling of timer_expires in the PM-runtime framework on
     32-bit systems and the handling of device links in it (Grygorii
     Strashko, Xiang Chen).

   - Add IO requests batching support to the hibernate image saving and
     reading code and drop a bogus get_gendisk() from there (Xiaoyi
     Chen, Christoph Hellwig).

   - Allow PCIe ports to be put into the D3cold power state if they are
     power-manageable via ACPI (Lukas Wunner).

   - Add missing header file include to a power capping driver (Pujin
     Shi).

   - Clean up the qcom-cpr AVS driver a bit (Liu Shixin).

   - Kevin Hilman steps down as designated reviwer of adaptive voltage
     scaling (AVS) drivers (Kevin Hilman)"

* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  cpufreq: stats: Fix string format specifier mismatch
  arm: disable frequency invariance for CONFIG_BL_SWITCHER
  cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
  cpufreq: stats: Add memory barrier to store_reset()
  cpufreq: schedutil: Simplify sugov_fast_switch()
  ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
  ACPI: EC: PM: Flush EC work unconditionally after wakeup
  PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
  PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
  cpufreq: Move traces and update to policy->cur to cpufreq core
  cpufreq: stats: Enable stats for fast-switch as well
  cpufreq: stats: Mark few conditionals with unlikely()
  cpufreq: stats: Remove locking
  cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
  PM: domains: Allow to abort power off when no ->power_off() callback
  PM: domains: Rename power state enums for genpd
  PM / devfreq: tegra30: Improve initial hardware resetting
  PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
  PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
  PM / devfreq: Add devfreq_get_devfreq_by_node function
  ...
2020-10-14 10:45:41 -07:00
Linus Torvalds
3ad11d7ac8 block-5.10-2020-10-12
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+EWUgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpnoxEADCVSNBRkpV0OVkOEC3wf8EGhXhk01Jnjtl
 u5Mg2V55hcgJ0thQxBV/V28XyqmsEBrmAVi0Yf8Vr9Qbq4Ze08Wae4ChS4rEOyh1
 jTcGYWx5aJB3ChLvV/HI0nWQ3bkj03mMrL3SW8rhhf5DTyKHsVeTenpx42Qu/FKf
 fRzi09FSr3Pjd0B+EX6gunwJnlyXQC5Fa4AA0GhnXJzAznANXxHkkcXu8a6Yw75x
 e28CfhIBliORsK8sRHLoUnPpeTe1vtxCBhBMsE+gJAj9ZUOWMzvNFIPP4FvfawDy
 6cCQo2m1azJ/IdZZCDjFUWyjh+wxdKMp+NNryEcoV+VlqIoc3n98rFwrSL+GIq5Z
 WVwEwq+AcwoMCsD29Lu1ytL2PQ/RVqcJP5UheMrbL4vzefNfJFumQVZLIcX0k943
 8dFL2QHL+H/hM9Dx5y5rjeiWkAlq75v4xPKVjh/DHb4nehddCqn/+DD5HDhNANHf
 c1kmmEuYhvLpIaC4DHjE6DwLh8TPKahJjwsGuBOTr7D93NUQD+OOWsIhX6mNISIl
 FFhP8cd0/ZZVV//9j+q+5B4BaJsT+ZtwmrelKFnPdwPSnh+3iu8zPRRWO+8P8fRC
 YvddxuJAmE6BLmsAYrdz6Xb/wqfyV44cEiyivF0oBQfnhbtnXwDnkDWSfJD1bvCm
 ZwfpDh2+Tg==
 =LzyE
 -----END PGP SIGNATURE-----

Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Series of merge handling cleanups (Baolin, Christoph)

 - Series of blk-throttle fixes and cleanups (Baolin)

 - Series cleaning up BDI, seperating the block device from the
   backing_dev_info (Christoph)

 - Removal of bdget() as a generic API (Christoph)

 - Removal of blkdev_get() as a generic API (Christoph)

 - Cleanup of is-partition checks (Christoph)

 - Series reworking disk revalidation (Christoph)

 - Series cleaning up bio flags (Christoph)

 - bio crypt fixes (Eric)

 - IO stats inflight tweak (Gabriel)

 - blk-mq tags fixes (Hannes)

 - Buffer invalidation fixes (Jan)

 - Allow soft limits for zone append (Johannes)

 - Shared tag set improvements (John, Kashyap)

 - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)

 - DM no-wait support (Mike, Konstantin)

 - Request allocation improvements (Ming)

 - Allow md/dm/bcache to use IO stat helpers (Song)

 - Series improving blk-iocost (Tejun)

 - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
   Xianting, Yang, Yufen, yangerkun)

* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
  block: fix uapi blkzoned.h comments
  blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
  blk-mq: get rid of the dead flush handle code path
  block: get rid of unnecessary local variable
  block: fix comment and add lockdep assert
  blk-mq: use helper function to test hw stopped
  block: use helper function to test queue register
  block: remove redundant mq check
  block: invoke blk_mq_exit_sched no matter whether have .exit_sched
  percpu_ref: don't refer to ref->data if it isn't allocated
  block: ratelimit handle_bad_sector() message
  blk-throttle: Re-use the throtl_set_slice_end()
  blk-throttle: Open code __throtl_de/enqueue_tg()
  blk-throttle: Move service tree validation out of the throtl_rb_first()
  blk-throttle: Move the list operation after list validation
  blk-throttle: Fix IO hang for a corner case
  blk-throttle: Avoid tracking latency if low limit is invalid
  blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
  blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
  block: Remove redundant 'return' statement
  ...
2020-10-13 12:12:44 -07:00
Christoph Hellwig
428805c0c5 PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
get_gendisk grabs a reference on the disk and file operation, so this
code will leak both of them while having absolutely no use for the
gendisk itself.

This effectively reverts commit 2df83fa4bc ("PM / Hibernate: Use
get_gendisk to verify partition if resume_file is integer format")

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-05 18:42:58 +02:00
Xiaoyi Chen
55c4478a8f PM: hibernate: Batch hibernate and resume IO requests
Hibernate and resume process submits individual IO requests for each page
of the data, so use blk_plug to improve the batching of these requests.

Testing this change with hibernate and resumes consistently shows merging
of the IO requests and more than an order of magnitude improvement in
hibernate and resume speed is observed.

One hibernate and resume cycle for 16GB RAM out of 32GB in use takes
around 21 minutes before the change, and 1 minutes after the change on
a system with limited storage IOPS.

Signed-off-by: Xiaoyi Chen <cxiaoyi@amazon.com>
Co-Developed-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
[ rjw: Subject and changelog edits, white space damage fixes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-28 15:58:18 +02:00
Christoph Hellwig
36daaa98f7 PM: mm: cleanup swsusp_swap_check
Use blkdev_get_by_dev instead of bdget + blkdev_get.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23 10:43:19 -06:00
Christoph Hellwig
21bd900572 mm: split swap_type_of
swap_type_of is used for two entirely different purposes:

 (1) check what swap type a given device/offset corresponds to
 (2) find the first available swap device that can be written to

Mixing both in a single function creates an unreadable mess.  Create two
separate functions instead, and switch both to pass a dev_t instead of
a struct block_device to further simplify the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23 10:43:19 -06:00
Christoph Hellwig
bb3247a399 PM: rewrite is_hibernate_resume_dev to not require an inode
Just check the dev_t to help simplifying the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23 10:43:19 -06:00
Peter Zijlstra
70d9329857 notifier: Fix broken error handling pattern
The current notifiers have the following error handling pattern all
over the place:

	int err, nr;

	err = __foo_notifier_call_chain(&chain, val_up, v, -1, &nr);
	if (err & NOTIFIER_STOP_MASK)
		__foo_notifier_call_chain(&chain, val_down, v, nr-1, NULL)

And aside from the endless repetition thereof, it is broken. Consider
blocking notifiers; both calls take and drop the rwsem, this means
that the notifier list can change in between the two calls, making @nr
meaningless.

Fix this by replacing all the __foo_notifier_call_chain() functions
with foo_notifier_call_chain_robust() that embeds the above pattern,
but ensures it is inside a single lock region.

Note: I switched atomic_notifier_call_chain_robust() to use
      the spinlock, since RCU cannot provide the guarantee
      required for the recovery.

Note: software_resume() error handling was broken afaict.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200818135804.325626653@infradead.org
2020-09-01 09:58:03 +02:00
Gustavo A. R. Silva
df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Linus Torvalds
4bf5e36118 libnvdimm for 5.9
- Add 'Runtime Firmware Activation' support for NVDIMMs that advertise
   the relevant capability
 - Misc libnvdimm and DAX cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCXzHodgAKCRAPzq5USduL
 djTjAQD1THDmizHn16zd94ueygh/BXfN0zyeVvQH352ol7kdfQEAj2A7YJ9XBbBY
 JC6/CNd+OiB9W88lLOUf3Waj1a7cUQ8=
 =Q6qn
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updayes from Vishal Verma:
 "You'd normally receive this pull request from Dan Williams, but he's
  busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
  this cycle.

  This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
  and a few small cleanups and fixes in libnvdimm and DAX. I'd
  originally intended to make separate topic-based pull requests - one
  for libnvdimm, and one for DAX, but some of the DAX material fell out
  since it wasn't quite ready.

  Summary:

   - add 'Runtime Firmware Activation' support for NVDIMMs that
     advertise the relevant capability

   - misc libnvdimm and DAX cleanups"

* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
  libnvdimm/security: the 'security' attr never show 'overwrite' state
  libnvdimm/security: fix a typo
  ACPI: NFIT: Fix ARS zero-sized allocation
  dax: Fix incorrect argument passed to xas_set_err()
  ACPI: NFIT: Add runtime firmware activate support
  PM, libnvdimm: Add runtime firmware activation support
  libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
  drivers/dax: Expand lock scope to cover the use of addresses
  fs/dax: Remove unused size parameter
  dax: print error message by pr_info() in __generic_fsdax_supported()
  driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
  tools/testing/nvdimm: Emulate firmware activation commands
  tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
  tools/testing/nvdimm: Add command debug messages
  tools/testing/nvdimm: Cleanup dimm index passing
  ACPI: NFIT: Define runtime firmware activation commands
  ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
  libnvdimm: Validate command family indices
2020-08-11 10:59:19 -07:00
Roman Gushchin
d42f3245c7 mm: memcg: convert vmstat slab counters to bytes
In order to prepare for per-object slab memory accounting, convert
NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes.

To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and
NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB).

Internally global and per-node counters are stored in pages, however memcg
and lruvec counters are stored in bytes.  This scheme may look weird, but
only for now.  As soon as slab pages will be shared between multiple
cgroups, global and node counters will reflect the total number of slab
pages.  However memcg and lruvec counters will be used for per-memcg slab
memory tracking, which will take separate kernel objects in the account.
Keeping global and node counters in pages helps to avoid additional
overhead.

The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it
will fit into atomic_long_t we use for vmstats.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:24 -07:00
Rafael J. Wysocki
86ba54fb08 Merge branches 'pm-sleep', 'pm-domains', 'powercap' and 'pm-tools'
* pm-sleep:
  PM: sleep: spread "const char *" correctness
  PM: hibernate: fix white space in a few places
  freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS
  PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove

* pm-domains:
  PM: domains: Restore comment indentation for generic_pm_domain.child_links
  PM: domains: Fix up terminology with parent/child

* powercap:
  powercap: Add Power Limit4 support
  powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments
  powercap: intel_rapl: add support for Sapphire Rapids

* pm-tools:
  pm-graph v5.7 - important s2idle fixes
  cpupower: Replace HTTP links with HTTPS ones
  cpupower: Fix NULL but dereferenced coccicheck errors
  cpupower: Fix comparing pointer to 0 coccicheck warns
2020-08-03 13:12:44 +02:00
Dan Williams
48001ea50d PM, libnvdimm: Add runtime firmware activation support
Abstract platform specific mechanics for nvdimm firmware activation
behind a handful of generic ops. At the bus level ->activate_state()
indicates the unified state (idle, busy, armed) of all DIMMs on the bus,
and ->capability() indicates the system state expectations for activate.
At the DIMM level ->activate_state() indicates the per-DIMM state,
->activate_result() indicates the outcome of the last activation
attempt, and ->arm() attempts to transition the DIMM from 'idle' to
'armed'.

A new hibernate_quiet_exec() facility is added to support firmware
activation in an OS defined system quiesce state. It leverages the fact
that the hibernate-freeze state wants to assert that a memory
hibernation snapshot can be taken. This is in contrast to a platform
firmware defined quiesce state that may forcefully quiet the memory
controller independent of whether an individual device-driver properly
supports hibernate-freeze.

The libnvdimm sysfs interface is extended to support detection of a
firmware activate capability. The mechanism supports enumeration and
triggering of firmware activate, optionally in the
hibernate_quiet_exec() context.

[rafael: hibernate_quiet_exec() proposal]
[vishal: fix up sparse warning, grammar in Documentation/]

Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-28 19:28:32 -06:00
Alexey Dobriyan
02d7f4005e PM: sleep: spread "const char *" correctness
Fixed string literals can be referred to as "const char *".

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
[ rjw: Minor subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-14 19:25:41 +02:00
Xiang Chen
6ada7ba2fa PM: hibernate: fix white space in a few places
In hibernate.c, some places lack of spaces while some places have
redundant spaces. So fix them.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-14 19:25:41 +02:00