IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler
to avoid race conditions for acquiring hw_semaphore.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20231219112416.3334928-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many ASoC drivers define CPU/Codec/Platform dai_link by below macro.
SND_SOC_DAILINK_DEFS(link,
(A) DAILINK_COMP_ARRAY(COMP_CPU("cpu_dai")),
(B) DAILINK_COMP_ARRAY(COMP_CODEC("codec", "dai1"),
(B) COMP_CODEC("codec", "dai2")),
(C) DAILINK_COMP_ARRAY(COMP_EMPTY()));
In this case, this macro will be converted to like below
[o] = static struct snd_soc_dai_link_component
(A) [o] link_cpus[] = {{ .dai_name = "cpu_dai" }};
(B) [o] link_codecs[] = {{ .dai_name = "dai1", .name = "codec" },
{ .dai_name = "dai2", .name = "codec" }}
(C) [o] link_platforms[] = {{ }};
CPU and Codec info will be filled by COMP_CPU() / COMP_CODEC (= A,B),
and Platform will have empty data by COMP_EMPTY() (= C) in this case.
Platform empty info will be filled when driver probe()
(most of case, CPU info will be copied to use soc-generic-dmaengine-pcm).
For example in case of DPCM FE/BE, it will be like below.
Codec will be dummy Component / DAI in this case (X).
SND_SOC_DAILINK_DEFS(link,
DAILINK_COMP_ARRAY(COMP_CPU(...)),
(X) DAILINK_COMP_ARRAY(COMP_DUMMY()),
DAILINK_COMP_ARRAY(COMP_EMPTY()));
(X) part will converted like below
[o] link_codecs[] = {{ .name = "snd-soc-dummy",
.dai_name = "snd-soc-dummy-dai", }}
Even though we already have common asoc_dummy_dlc for dummy
Component / DAI, this macro will re-create new dummy dlc.
Some drivers defines many dai_link info via SND_SOC_DAILINK_DEFS(),
this means many dummy dlc also will be re-created. This is waste of
memory.
If we can use existing common asoc_dummy_dlc at (X),
we can avoid to re-creating dummy dlc, then, we can save the memory.
At that time, we want to keep existing code as much as possible, because
too many drivers are using this macro. But because of its original style,
using common asoc_dummy_dlc from it is very difficult or impossible.
So let's change the mind. The macro is used like below
SND_SOC_DAILINK_DEFS(link,
DAILINK_COMP_ARRAY(COMP_CPU(...)),
(x) DAILINK_COMP_ARRAY(COMP_DUMMY()),
DAILINK_COMP_ARRAY(COMP_EMPTY()));
static struct snd_soc_dai_link dai_links[] = {
{
.name = ...,
.stream_name = ...,
(y) SND_SOC_DAILINK_REG(link),
},
(y) part will be like below
static struct snd_soc_dai_link dai_links[] = {
{
.name = ...,
.stream_name = ...,
^ ...
| .codecs = link_codecs,
(y) .num_codecs = ARRAY_SIZE(link_codecs),
v ...
}
This patch try to use trick on COMP_DUMMY()
- #define COMP_DUMMY() { .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }
+ #define COMP_DUMMY()
By this tric, (x) part will be like below.
before
[o] link_codecs[] = {{ .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }}
after
[o] link_codecs[] = { };
This is same as below
[o] link_codecs[0];
This means it has pointer (link_codecs), but the array size is 0.
(y) part will be like below.
static struct snd_soc_dai_link dai_links[] = {
{
...
.codecs = link_codecs,
.num_codecs = 0,
...
},
This is very special settings that normal use usually not do,
but new macro do.
We can find this special settings on soc-core.c and fill it as
"dummy DAI" (= asoc_dummy_dlc). By this tric, we can avoid to re-create
dummy dlc and save the memory.
This patch add tric at COMP_DUMMY() and add snd_soc_fill_dummy_dai()
to fill dummy DAI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/871qbi93qu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use SND_SOC_DAILINK_REG() with 2 parameter.
DUMMY Platform is not needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/875y0u93rq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use SND_SOC_DAILINK_REG() with 2 parameter.
DUMMY Platform is not needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/877cla93ry.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.
The patch is to clear xMR in hw_free() to avoid such
channel swap issue.
Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes a problem introduced while fixing ELD reporting with no jack
set.
Most driver using the hdmi-codec will call the 'plugged_cb' callback
directly when registered to report the initial state of the HDMI connector.
With the commit mentionned, this occurs before jack is ready and the
initial report is lost for platforms actually providing a jack for HDMI.
Fix this by storing the hdmi connector status regardless of jack being set
or not and report the last status when jack gets set.
With this, the initial state is reported correctly even if it is
disconnected. This was not done initially and is also a fix.
Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe")
Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/
Cc: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix few trivial code style issues, pointed out by checkpatch, so they do
not get copied to new code (when old code is used as template):
WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
WARNING: function definition argument 'struct platform_device *' should also have an identifier name
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: Missing a blank line after declarations
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100048.211800-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some components like platforms don't have DAIs. If the active count of
these components is ignored pinctrl may be wrongly selected between
default and sleep state. So need to increment or decrement the active
count for components without DAIs to avoid it.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20231204111532.3165-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sound machine driver for the soundcards on Qualcomm X1E80100 SoC,
supporting up to four channel audio playback over Soundwire bus. The
driver is based on existing sc8280xp.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100116.211898-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable support for dual MAX98390 amplifiers on the mt8188-rt5682s board.
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Link: https://msgid.link/r/20231212123050.4080083-5-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To use ES8326 as the codec, add a new sound card
named mt8186_es8326.
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20231212123050.4080083-4-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reduce code duplication, unify the headset codec init/exit api.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Link: https://msgid.link/r/20231212123050.4080083-3-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a MODULE_DESCRIPTION() in the generic ACP machine driver to avoid
the following warning when building with W=1:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/acp/snd-acp-mach.o
Fixes: d4c750f2c7d4 ("ASoC: amd: acp: Add generic machine driver support for ACP cards")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing MODULE_DESCRIPTION() to avoid the following warning when
building with W=1:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/snd-acp-config.o
Fixes: f1bdd8d385a8 ("ASoC: amd: Add module to determine ACP configuration")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the old SET_{RUNTIME,SYSTEM_SLEEP}_PM_OPS() helpers with their
modern alternatives and drop the now unnecessary __maybe_unused
qualifier in the suspend and resume functions.
Additionally, make use of pm_ptr() to ensure the PM ops are dropped when
building with CONFIG_PM disabled.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit e89f45edb747 ("ASoC: amd: vangogh: Add check for acp config
flags in vangogh platform"), the Vangogh ACP PCI driver could not be used
anymore for boards which happen to have a matching entry in acp-config
list.
Commit f18818eb0dbe ("ASoC: amd: vangogh: Add condition check for acp
config flag") slightly changed the behaviour to permit loading the
driver if AMD_LEGACY flag is set. However, for AMD_SOF flag the probing
is still denied, even if SOF support is disabled in kernel
configuration.
While this helps preventing conflicts between SOF and generic ACP
drivers, there are cases where a fallback to the generic non-SOF support
would still be needed or useful, e.g. SOF firmware is not available or
doesn't work properly, SOF driver is broken or doesn't provide full
support for a particular hardware, or simply for testing/debugging the
alternative solution. A real-life example is Steam Deck OLED, which
works with both drivers.
Prevent returning from probe() when ACP config indicates SOF support for
the current board *and* the Vangogh SOF driver is not enabled in kernel
configuration.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Vangogh machine driver variant based on the MAX98388 amplifier, as
found on Valve's Steam Deck OLED, relies on probing via an ACPI match
table. This worked fine until commit 197b1f7f0df1 ("ASoC: amd: Add new
dmi entries to config entry") enabled SOF support for the target machine
(i.e. Galileo product), causing the sound card to enter the deferred
probe state indefinitely:
$ cat /sys/kernel/debug/devices_deferred
AMDI8821:00 acp5x_mach: Register card (acp5x-max98388) failed
The issue is related to commit e89f45edb747 ("ASoC: amd: vangogh: Add
check for acp config flags in vangogh platform"), which tries to
mitigate potential conflicts between SOF and generic ACP Vangogh
drivers, due to sharing the PCI device IDs.
However, the solution is effective only if the machine driver is
directly probed by pci-acp5x through platform_device_register_full().
Hence, remove the conflicting ACPI based probing and rely exclusively on
DMI quirks for sound card setup.
Fixes: dba22efd0d17 ("ASoC: amd: vangogh: Add support for NAU8821/MAX98388 variant")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Tegra20 AC97 driver is using the legacy GPIO APIs in
<linux/of_gpio.h> and <linux/gpio.h> to obtain GPIOs for reset
and sync.
Convert it over and fix the polarity error on the RESET line
in the process: this reset line is clearly active low. Just
fix the one in-tree device tree site using it at the same
time.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20231214-gpio-descriptors-sound-misc-v1-4-e3004176bd8b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some BYTCR x86 tablets with a rt5640 codec have the left and right channels
of their speakers swapped.
Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets
cfg-spk:swapped in the components string to let userspace know
about the swapping so that the UCM profile can configure the mixer
to correct this.
Enable this new quirk on the Medion Lifetab S10346 which has its
speakers swapped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
We should query FW config if context save is supported, and no need
to reload FW if hda->booted_from_imr and ipc4_data->fw_context_save
are true.
If fw_context_save is defined by fw, driver can skip library reload on
d3 exit or reload library.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver queries fw_context_save feature when fw is ready and can skip
library reload with this feature since library is saved in persistent
memory. The default value of fw_context_save is true unless fw reports
false.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need this to support MICFIL PDM found on i.MX8MP where the DAI link
supports only capture direction.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/20231128081119.106360-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If probe is defered no error should be printed. Use dev_err_probe() to
have it muted.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/b941a404d97c01ef3e30c49925927b9a7dafeb19.1702422544.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: bbbc18d8c27c ("ASoC: cs42l43: Allow HP amp to cool off after current limit")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231212104149.2388753-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In HDLC mode, some status flags related to the data read transfer can be
set by the hardware and need to be known by a QMC consumer for further
analysis.
Extend the API in order to provide these transfer status flags at the
read complete() call.
In TRANSPARENT mode, these flags have no meaning. Keep only one read
complete() API and update the consumers working in transparent mode.
In this case, the newly introduced flags parameter is simply unused.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmV2PMQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgQIAKSdjtpkv+IeDwph
umLHxDlCTT8nl+TAhEYuxSdMiHt1i7+zyF0snnHhGthBRnBZBf+PDdkQOmqtjLZj
e591VGY7tdNCAVUwmRRaI82JFz9Pl1k8DXL3f+CE1+MfbpsirAecoIAL0rsvg+4f
ICKSAOBZonL7GT7IGrsbxgqGKCLC+2PcgNT4pADBdjtbC1nmVSLK21dtWr6i4xsn
CT9MxAnej1+EOpreyHhNZUVqfQy0/04x4OY0u/EOXU3PgpfGTrAzkyfwzcd/eit0
x59TZ0owDVXfvvdXUUAC0zG1th2ek5LKNtL+C4rKOoAbq7GZoQfjN5M/Ug+yykwE
aqm6CJ8=
=tZ+R
-----END PGP SIGNATURE-----
Backmerge tag 'v6.7-rc5' into drm-next
Linux 6.7-rc5
Alex requested this for some amdkfd work relying on the symbols exports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Whilst occasional current limiting is fine, constant current limiting
should be avoided. Add a back off system that will disable the
headphone amp, if a lot of current limiting is seen in a short window
of time.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alas on some headsets the bias sense can cause problems with the
type detection. It can occasionally be falsely triggered by the type
detect itself and as the clamp is applied when this happens, it will
cause a headset to be incorrectly identified as headphones. As
such it should be disabled whilst running type detect. This does
mean a jack removal during type detect will cause a larger click
but that is unfortunately unavoidable.
Fixes: 1e4ce0d5c023 ("ASoC: cs42l43: Move headset bias sense enable earlier in process")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the ALSA prefix for the CS35L56 to "AMPn".
This keeps them consistent with the CS35L56 HDA driver. It also
avoids coding the chip ID into the control name, so that other
Cirrus amps with the same controls can have the same control
names.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 05fe62842804 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c")
Link: https://msgid.link/r/20231205115715.2460386-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fix is based on commit [1] fixing click and pop sounds during
SoundWire port start because PA is left unmuted.
making use of new mute_unmute_on_trigger flag and removing unmute
at PA setup, removes the Click/Pop issue at SoundWire enable.
[1] 805ce81826c8 ("ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211-topic-sm8x50-upstream-wsa884x-fix-plop-v1-1-0dc630a19172@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support four channel streams. Map channel 3 and 4 to left/right
surround ("quad(side)" from ffmpeg standard channel list) to match what
is in qdsp6/q6dsp-common.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
