IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add the rpmpd node on the msm8998 and define the available levels.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: dropped use of level defines, to allow merging in parallel]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add the rpmpd node on the qcs404 and define the available levels.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sibis: fixup available levels]
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: dropped use of level defines, to allow merging in parallel]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Although we don't describe lpass and wcss with all the details needed to
control them in a Trustzone-less environment, move them under soc in
order to tidy up the structure and prepare for describing them fully.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add all the properties needed to describe the CDSP for both the
Trustzone and non-Trustzone based remoteproc case, allowing any child
devices to be described once by just overriding the compatible to match
the firmware available on the board.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The bus halt registers in TCSR are referenced as a syscon device, add
these so that we can reference them from the remoteproc nodes.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
With the Trustzone based CDSP remoteproc driver these clocks are
controlled elsewhere and as they are not enabled by anything in Linux
the clock framework will turn them off during lateinit.
This results in issues either to later start the CDSP, using the
Trustzone interface, or if the CDSP is already running it will crash.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add device bindings for cpuidle states for cpu devices.
Cc: <mkshah@codeaurora.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[amit: rename the idle-states to more generic names and fixups]
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
the same microarchitecture and the two clusters only differ in the
maximum frequency attainable by the CPUs.
Add capacity-dmips-mhz property to allow the topology code to determine
the actual capacity by taking into account the highest frequency for
each CPU.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add device bindings for cpuidle states for cpu devices.
msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
the same microarchitecture and the two clusters only differ in the
maximum frequency attainable by the CPUs.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Instead of using Qualcomm-specific terminology, use generic node names
for the idle states that are easier to understand. Move the description
into the "idle-state-name" property.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The idle-states binding documentation[1] mentions that the
'entry-method' property is required on 64-bit platforms and must be set
to "psci".
[1] Documentation/devicetree/bindings/arm/idle-states.txt (see
idle-states node)
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add a node describing the Turing Clock Controller of the QCS404. Given
the default access restriction the node is left disabled.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add device bindings for cpuidle states for cpu devices.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
[amit: rename the idle-states to more generic names and fixups]
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Some Adreno GPU targets require a special zap shader to bring the GPU
out of secure mode. Define a region to allocate and store the zap
shader.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[bjorn: Rebase ontop of recent reserved-memory patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add the nodes to describe the Adreno GPU and GMU devices for sdm845.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[bjorn: Added required gx power-domain]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The MTP is a "mobile reference device", as such the default operation is
to use fastboot to boot/flash software onto it and the common case is
thereby that we boot with a USB cable connected downstream from a PC or
a hub. And without support for the PMI8998 charger block VBUS will not
be driven by the device.
Switch to peripheral until we can enable OTG.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Increase s3 max voltage in accordance to QCS404 CPR Fusing Guide Rev 6.0
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The current l3 min voltage level is not supported by
the regulator (the voltage is not a multiple of the regulator step size),
so a driver requesting this exact voltage would fail, see discussion in:
https://patchwork.kernel.org/comment/22461199/
It was agreed upon to set a min voltage level that is a multiple of the
regulator step size.
There was actually a patch sent that did this:
https://patchwork.kernel.org/patch/10819313/
However, the commit 331ab98f8c4a ("arm64: dts: qcom: qcs404:
Fix voltages l3") that was applied is not identical to that patch.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The adc outputs shouldn't contain information about their configuration
e.g. 100K pull-up, but just reflect the name of the signal in the
schematics.
Making them labels also allows us to overwrite their configuration in
board-specific DTs.
Sort them by order as used in adc5_chans_rev2, while we're at it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Set the qcom,ratiometric property to make the VADC use the VDD reference
(1.875V) and GND for channel calibration of the temperature channels
instead of 1.25V. Allow a 200us delay between the AMUX configuration and
ADC starting conversion using qcom,hw-settle-time as described in
documentation.
Fixes: 041b9a7b9fdb ("arm64: dts: pms405: Export PMIC temperature to thermal framework")
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
SDM845 implements ARM's Dynamiq architecture that allows the big and
LITTLE cores to exist in a single cluster sharing the L3 cache.
Fix the cpu-map to put all cpus into a single cluster.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add the reset controller for the UFS controller, and wire it up
so that the UFS PHY can initialize itself without relying on
implicit sequencing between the two drivers.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Even though it translates to the same thing down to the binary level, we
should have an array of 2 number cells to describe each voltage state,
which in turns create a validation warning.
Let's fix this.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This patch enables BT support for the CAT874 board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables WLAN support for the CAT874 board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
We do not normally access the flash on the Juno, as this
will disturb other aspects of the system, but if we choose
to do so anyways, we should set up the partitions in the
right way so we will find out what is in the flash.
The ARM Firmware Suite now has its own compatible and
proper device tree bindings to trigger discovery of the
flash contents, and Linux supports handling the new type
of AFS partitions.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel,
so can dismiss warning during initialisation.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add ENETC 1588 timer node which is ENETC PF 4 (Physiscal Function 4).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allwinner H6 has a r_watchdog similar to A64.
Declare it in the device-tree.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner H6 has a watchog node which seems broken
on some boards.
Test has been performed on several boards.
Chen-Yu Tsai boards:
Pine H64 - H6448BA 7782 => OK
OrangePi Lite 2 - H8068BA 61C2 => KO
Martin Ayotte boards:
Pine H64 - H8069BA 6892 => OK
OrangePi 3 - HA047BA 69W2 => KO
OrangePi One Plus - H7310BA 6842 => KO
OrangePi Lite2 - H6448BA 6662 => KO
Clément Péron board:
Beelink GS1 - H7309BA 6842 => KO
As it seems not fixable for now, declare the node
but leave it disable with a comment.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add the synopsys ethernet mac controller embedded in the g12a SoC family.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
i.MX8MM has clock gate for SNVS module, add clock info to SNVS
RTC node for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MM has clock gate for each GPIO bank, add clock info
to GPIO node for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jetson Nano, Jetson TX1 and Jetson TX2 all are named "Developer Kit" and
Jetson AGX Xavier is the odd one out. It's officially also called the
"Developer Kit", not "Development Kit", so make it consistent with the
rest.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
P2888 is the internal part number for the Jetson AGX Xavier module.
Clarify that using the DT model property.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
P3310 is the internal part number for the Jetson TX2 module. Clarify
that using the DT model property.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
P2771 is the internal part number for the Jetson TX2 Developer Kit.
Clarify that using the DT model property.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the hdmitx glue device linking the SoC audio interfaces to the
embedded Synopsys hdmi controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
At the moment the sysnopsys hdmi i2s driver provides a single playback
DAI. Add the corresponding sound-dai-cell to the hdmi device node.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the spdif input device node and the pinctrl definition for
this capture interface g12a SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the pdm device node and the pinctrl definition for this capture
interface g12a SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the devices nodes and pinctrl definitions for the spdif outputs of
the g12a SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the devices and pinctrl definitions for the tdm interfaces of
the g12a SoC family.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the playback and capture memory interfaces of the g12a SoC family.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the audio DDR memory arbitrer of the g12a SoC family.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
