IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The execution time of some operations is very performance critical, such
as cache invalidation and PRQ processing time. This adds some common code
to monitor the execution time range of those operations. The interfaces
include enabling/disabling, checking status, updating sampling data and
providing a common string format for users.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210520031531.712333-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current VT-d implementation supports nested translation only if all
underlying IOMMUs support the nested capability. This is unnecessary
as the upper layer is allowed to create different containers and set
them with different type of iommu backend. The IOMMU driver needs to
guarantee that devices attached to a nested mode iommu_domain should
support nested capabilility.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210517065701.5078-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver reports the DMA fault reason in a decimal number
while the VT-d specification uses a hexadecimal one. It's inconvenient
that users need to covert them everytime before consulting the spec.
Let's use hexadecimal number for a DMA fault reason.
The fault message uses 0xffffffff as PASID for DMA requests w/o PASID.
This is confusing. Tweak this by adding "NO_PASID" explicitly.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210517065425.4953-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/iommu/intel/pasid.c follows this syntax, but
the content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc:
warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210523143245.19040-1-yashsri421@gmail.com
Link: https://lore.kernel.org/r/20210610020115.1637656-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210512064426.3440915-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210519015027.108468-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The translation caches may preserve obsolete data when the
mapping size is changed, suppose the following sequence which
can reveal the problem with high probability.
1.mmap(4GB,MAP_HUGETLB)
2.
while (1) {
(a) DMA MAP 0,0xa0000
(b) DMA UNMAP 0,0xa0000
(c) DMA MAP 0,0xc0000000
* DMA read IOVA 0 may failure here (Not present)
* if the problem occurs.
(d) DMA UNMAP 0,0xc0000000
}
The page table(only focus on IOVA 0) after (a) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x1a30a72003 entry:0xffff89b39cacb000
PTE: 0x21d200803 entry:0xffff89b3b0a72000
The page table after (b) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x1a30a72003 entry:0xffff89b39cacb000
PTE: 0x0 entry:0xffff89b3b0a72000
The page table after (c) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x21d200883 entry:0xffff89b39cacb000 (*)
Because the PDE entry after (b) is present, it won't be
flushed even if the iommu driver flush cache when unmap,
so the obsolete data may be preserved in cache, which
would cause the wrong translation at end.
However, we can see the PDE entry is finally switch to
2M-superpage mapping, but it does not transform
to 0x21d200883 directly:
1. PDE: 0x1a30a72003
2. __domain_mapping
dma_pte_free_pagetable
Set the PDE entry to ZERO
Set the PDE entry to 0x21d200883
So we must flush the cache after the entry switch to ZERO
to avoid the obsolete info be preserved.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Fixes: 6491d4d02893 ("intel-iommu: Free old page tables before creating superpage")
Cc: <stable@vger.kernel.org> # v3.0+
Link: https://lore.kernel.org/linux-iommu/670baaf8-4ff8-4e84-4be3-030b95ab5a5e@huawei.com/
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210415004628.1779-1-longpeng2@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If 'intel_cap_audit()' fails, we should return directly, as already done in
the surrounding error handling path.
Fixes: ad3d19029979 ("iommu/vt-d: Audit IOMMU Capabilities and add helper functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/98d531caabe66012b4fffc7813fd4b9470afd517.1618124777.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit f68c7f539b6e9 ("iommu/vt-d: Enable write protect for supervisor
SVM") added pasid_enable_wpe() which hit below compile error with !X86.
../drivers/iommu/intel/pasid.c: In function 'pasid_enable_wpe':
../drivers/iommu/intel/pasid.c:554:22: error: implicit declaration of function 'read_cr0' [-Werror=implicit-function-declaration]
554 | unsigned long cr0 = read_cr0();
| ^~~~~~~~
In file included from ../include/linux/build_bug.h:5,
from ../include/linux/bits.h:22,
from ../include/linux/bitops.h:6,
from ../drivers/iommu/intel/pasid.c:12:
../drivers/iommu/intel/pasid.c:557:23: error: 'X86_CR0_WP' undeclared (first use in this function)
557 | if (unlikely(!(cr0 & X86_CR0_WP))) {
| ^~~~~~~~~~
../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
78 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
../drivers/iommu/intel/pasid.c:557:23: note: each undeclared identifier is reported only once for each function it appears in
557 | if (unlikely(!(cr0 & X86_CR0_WP))) {
| ^~~~~~~~~~
../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
78 | # define unlikely(x) __builtin_expect(!!(x), 0)
|
Add the missing dependency.
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f68c7f539b6e9 ("iommu/vt-d: Enable write protect for supervisor SVM")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20210411062312.3057579-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a present pasid entry is disassembled, all kinds of pasid related
caches need to be flushed. But when a pasid entry is not being used
(PRESENT bit not set), we don't need to do this. Check the PRESENT bit
in intel_pasid_tear_down_entry() and avoid flushing caches if it's not
set.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the Intel IOMMU is operating in the scalable mode, some information
from the root and context table may be used to tag entries in the PASID
cache. Software should invalidate the PASID-cache when changing root or
context table entries.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Address field of the Page Request Descriptor only keeps bit [63:12]
of the offending address. Convert it to a full address before reporting
it to device drivers.
Fixes: eb8d93ea3c1d3 ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit enable_nesting method instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-17-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allow drivers to query and enable IOMMU_DEV_FEAT_IOPF, which amounts to
checking whether PRI is enabled.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core code handles flushing per-IOVA domain CPU rcaches,
remove the handling here.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1616675401-151997-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some functions have been removed. Remove the remaining function
delarations.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323010600.678627-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The SVM_FLAG_PRIVATE_PASID has never been referenced in the tree, and
there's no plan to have anything to use it. So cleanup it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323010600.678627-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The svm_dev_ops has never been referenced in the tree, and there's no
plan to have anything to use it. Remove it to make the code neat.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323010600.678627-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d specification (section 7.6) requires that the value in the
Private Data field of a Page Group Response Descriptor must match
the value in the Private Data field of the respective Page Request
Descriptor.
The private data field of a page group response descriptor is set then
immediately cleared in prq_event_thread(). This breaks the rule defined
by the VT-d specification. Fix it by moving clearing code up.
Fixes: 5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320024156.640798-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid_lock is used to synchronize different threads from modifying a
same pasid directory entry at the same time. It causes below lockdep splat.
[ 83.296538] ========================================================
[ 83.296538] WARNING: possible irq lock inversion dependency detected
[ 83.296539] 5.12.0-rc3+ #25 Tainted: G W
[ 83.296539] --------------------------------------------------------
[ 83.296540] bash/780 just changed the state of lock:
[ 83.296540] ffffffff82b29c98 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.0+0x32/0x110
[ 83.296547] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 83.296547] (pasid_lock){+.+.}-{2:2}
[ 83.296548]
and interrupts could create inverse lock ordering between them.
[ 83.296549] other info that might help us debug this:
[ 83.296549] Chain exists of:
device_domain_lock --> &iommu->lock --> pasid_lock
[ 83.296551] Possible interrupt unsafe locking scenario:
[ 83.296551] CPU0 CPU1
[ 83.296552] ---- ----
[ 83.296552] lock(pasid_lock);
[ 83.296553] local_irq_disable();
[ 83.296553] lock(device_domain_lock);
[ 83.296554] lock(&iommu->lock);
[ 83.296554] <Interrupt>
[ 83.296554] lock(device_domain_lock);
[ 83.296555]
*** DEADLOCK ***
Fix it by replacing the pasid_lock with an atomic exchange operation.
Reported-and-tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320020916.640115-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VMD retransmits child device MSI-X with the VMD endpoint's requester-id.
In order to support direct interrupt remapping of VMD child devices,
ensure that the IRTE is programmed with the VMD endpoint's requester-id
using pci_real_dma_dev().
Link: https://lore.kernel.org/r/20210210161315.316097-2-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Page requests are originated from the user page fault. Therefore, we
shall set FAULT_FLAG_USER.
FAULT_FLAG_REMOTE indicates that we are walking an mm which is not
guaranteed to be the same as the current->mm and should not be subject
to protection key enforcement. Therefore, we should set FAULT_FLAG_REMOTE
to avoid faults when both SVM and PKEY are used.
References: commit 1b2ee1266ea6 ("mm/core: Do not enforce PKEY permissions on remote mm access")
Reviewed-by: Raj Ashok <ashok.raj@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-5-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When supervisor/privilige mode SVM is used, we bind init_mm.pgd with
a supervisor PASID. There should not be any page fault for init_mm.
Execution request with DMA read is also not supported.
This patch checks PRQ descriptor for both unsupported configurations,
reject them both with invalid responses.
Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-4-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In guest supervisor shared virtual addressing (SVA), write-protect
should be honored upon guest bind supervisor PASID request.
This patch extends the VT-d portion of the IOMMU UAPI to include WP bit.
WPE bit of the supervisor PASID entry will be set to match CPU CR0.WP bit.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-3-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In supervisor shared virtual addressing (SVA), where page tables
are shared between CPU and DMA, IOMMU PASID entry WPE bit should match
CR0.WP bit in the CPU.
This patch sets WPE bit for supervisor PASIDs if CR0.WP is set.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-2-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the invalidation queue errors are encountered, dump the information
logged by the VT-d hardware together with the pending queue invalidation
descriptors.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210318005340.187311-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the Intel VT-d supports Shared Virtual Memory (SVM) only when
IO page fault is supported. Otherwise, shared memory pages can not be
swapped out and need to be pinned. The device needs the Address Translation
Service (ATS), Page Request Interface (PRI) and Process Address Space
Identifier (PASID) capabilities to be enabled to support IO page fault.
Disable SVM when ATS, PRI and PASID are not enabled in the device.
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210314201534.918-1-kyung.min.park@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In converting intel-iommu over to the common IOMMU DMA ops, it quietly
lost the functionality of its "forcedac" option. Since this is a handy
thing both for testing and for performance optimisation on certain
platforms, reimplement it under the common IOMMU parameter namespace.
For the sake of fixing the inadvertent breakage of the Intel-specific
parameter, remove the dmar_forcedac remnants and hook it up as an alias
while documenting the transition to the new common parameter.
Fixes: c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/7eece8e0ea7bfbe2cd0e30789e0d46df573af9b0.1614961776.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As per Intel vt-d spec, Rev 3.0 (section 10.4.45 "Virtual Command Response
Register"), the status code of "No PASID available" error in response to
the Allocate PASID command is 2, not 1. The same for "Invalid PASID" error
in response to the Free PASID command.
We will otherwise see confusing kernel log under the command failure from
guest side. Fix it.
Fixes: 24f27d32ab6b ("iommu/vt-d: Enlightened PASID allocation")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210227073909.432-1-yuzenghui@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some Intel VT-d hardware implementations don't support memory coherency
for page table walk (presented by the Page-Walk-coherency bit in the
ecap register), so that software must flush the corresponding CPU cache
lines explicitly after each page table entry update.
The iommu_map_sg() code iterates through the given scatter-gather list
and invokes iommu_map() for each element in the scatter-gather list,
which calls into the vendor IOMMU driver through iommu_ops callback. As
the result, a single sg mapping may lead to multiple cache line flushes,
which leads to the degradation of I/O performance after the commit
<c588072bba6b5> ("iommu/vt-d: Convert intel iommu driver to the iommu
ops").
Fix this by adding iotlb_sync_map callback and centralizing the clflush
operations after all sg mappings.
Fixes: c588072bba6b5 ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/linux-iommu/D81314ED-5673-44A6-B597-090E3CB83EB0@oracle.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
[ cel: removed @first_pte, which is no longer used ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/linux-iommu/161177763962.1311.15577661784296014186.stgit@manet.1015granger.net
Link: https://lore.kernel.org/r/20210204014401.2846425-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
