IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The ACGR register is at the offset of 0x1024, beyond the 4k originally
assigned to the MPMU range.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-7-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the linux,usable-memory properties; the schema is unhappy about
them.
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-6-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the linux,usable-memory properties; the schema is unhappy about
them:
mmp2-olpc-xo-1-75.dt.yaml: /: memory: False schema does not allow
{'linux,usable-memory': [[0, 528482304]],
'available': [[847872, 519245824, 4096, 782336]],
'reg': [[0, 536870912]], 'device_type': ['memory']}
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-5-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYBgmmwAKCRALBhiOFHI7
1Wu7AKChZUwxab38QXEkPxLvaXGOW+BELwCfXjYbGc9Utnl5Le0HbuWmam+VRA8=
=ZHNA
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.12 (part 1)
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
* tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada388-helios4: assign pinctrl to each fan
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada-385-linksys: fix usage with newer devices
Link: https://lore.kernel.org/r/87sg6fn49o.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.12, please pull the following:
- Dave adds a proper compatile string for the DSI1 panel on 2711
(Raspberry Pi 4) to permit adequate driver differentiation
- Nicolas declares reserved memory regions filed by the Rasbperry Pi
bootloader to indicate the running system configuration
- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
controllers
- Stanislav fixes a tab vs. space issue in the BCM21664 DTS
-----BEGIN PGP SIGNATURE-----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=VFVR
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.12, please pull the following:
- Dave adds a proper compatile string for the DSI1 panel on 2711
(Raspberry Pi 4) to permit adequate driver differentiation
- Nicolas declares reserved memory regions filed by the Rasbperry Pi
bootloader to indicate the running system configuration
- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
controllers
- Stanislav fixes a tab vs. space issue in the BCM21664 DTS
* tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Add the CEC interrupt controller
ARM: dts: bcm21664: Replace spaces with a tab
ARM: dts: bcm2711: Add the BSC interrupt controller
ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
ARM: dts: bcm2711: Use compatible string for BCM2711 DSI1
Link: https://lore.kernel.org/r/20210131221721.685974-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYBb7uwAKCRDj7w1vZxhR
xd3mAP46LnfQ/9vvCjhWMV5J7E1ob3u1A5ND3sULpS0X0oEU1wD/aCuoCtSZY4hN
/lpCtj2QS1GAH8c5ipHqB8SgBRmCoQo=
=fzEu
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove asm/fixmap.h which is included more than once.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Hailong Liu <carver4lio@163.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARM has recently supported KASAN, so I think that it's time to add
KASAN regions for PTDUMP on ARM.
This patch has been tested with QEMU + vexpress-a15. Both
CONFIG_ARM_LPAE and no CONFIG_ARM_LPAE.
The result after patching looks like this:
---[ Kasan shadow start ]---
0x6ee00000-0x7af00000 193M RW NX SHD MEM/CACHED/WBWA
0x7b000000-0x7f000000 64M ro NX SHD MEM/CACHED/WBWA
---[ Kasan shadow end ]---
---[ Modules ]---
---[ Kernel Mapping ]---
......
---[ vmalloc() Area ]---
......
---[ vmalloc() End ]---
---[ Fixmap Area ]---
---[ Vectors ]---
......
---[ Vectors End ]---
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Signed-off-by: Hailong liu <carver4lio@163.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The vdso linker script is prepocessed on demand. Adding it to 'targets'
is enough, and line 13 of this Makefile does that. This extra-y addition
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently ARCH_HAVE_NMI_SAFE_CMPXCHG is not set on Arm systems and this
makes it impossible to enable features such as ftrace histogram triggers
on Arm platforms.
Most Arm systems are NMI safe simply because there is no NMI but this isn't
universally true meaning we cannot set ARCH_HAVE_NMI_SAFE_CMPXCHG for all
Arm devices. However the load/store exclusive implementation of cmpxchg is
NMI-safe and this implementation is used ARMv6k and later. Let's select
ARCH_HAVE_NMI_SAFE_CMPXCHG for these systems.
Note that ARMv6 uses load/store exclusive for 32-bit cmpxchg but relies on
interrupt masking for 8- and 16-bit operations. This patch is conservative
and does not change behaviour for CPU_V6.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The driver core ignores the return value of struct bus_type::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct locomo_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.
Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sa1111_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.
Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Not used anymore after refactoring:
arch/arm/kernel/smp.c: In function ‘show_ipi_list’:
arch/arm/kernel/smp.c:543:16: warning: variable ‘irq’ set but not used [-Wunused-but-set-variable]
543 | unsigned int irq;
Fixes: 88c637748e31 ("ARM: smp: Use irq_desc_kstat_cpu() in show_ipi_list()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:
Uncompressing Linux... done, booting the kernel.
The reason is that it clears nTLSMD bit when disabling caches:
nTLSMD, bit [3]
When ARMv8.2-LSMAOC is implemented:
No Trap Load Multiple and Store Multiple to
Device-nGRE/Device-nGnRE/Device-nGnRnE memory.
0b0 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
generate a stage 1 Alignment fault.
0b1 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.
This bit is permitted to be cached in a TLB.
This field resets to 1.
Otherwise:
Reserved, RES1
So as effect we start getting traps we are not quite ready for.
Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.
Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently, the start address of physical memory is obtained by masking
the program counter with a fixed mask of 0xf8000000. This mask value
was chosen as a balance between the requirements of different platforms.
However, this does require that the start address of physical memory is
a multiple of 128 MiB, precluding booting Linux on platforms where this
requirement is not fulfilled.
Fix this limitation by validating the masked address against the memory
information in the passed DTB. Only use the start address
from DTB when masking would yield an out-of-range address, prefer the
traditional method in all other cases. Note that this applies only to the
explicitly passed DTB on modern systems, and not to a DTB appended to
the kernel, or to ATAGS. The appended DTB may need to be augmented by
information from ATAGS, which may need to rely on knowledge of the start
address of physical memory itself.
This allows to boot Linux on r7s9210/rza2mevb using the 64 MiB of SDRAM
on the RZA2MEVB sub board, which is located at 0x0C000000 (CS3 space),
i.e. not at a multiple of 128 MiB.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The build robots have discovered that uncompress debugging
and semihosting does not play well together.
This is due to many factors but in general semihosting
debug needs to be rewritten to work the same way as any
LL_DEBUG, e.g. with a header in
arch/arm/include/debug/semihosting.S
This is a long term solution and needs testing on real
hardware and/or software models using semihosting.
For now disable uncompress debugging under semihosting.
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a2MyLnULmUr4zgzkiWPiYfp+Xs8ruz9_q-PugVf_9DCCw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add the entry for the STiH418 SBC UART0 low level uart.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Update the sti platform LL_UART support to rely on
CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT from Kconfig
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Take the 4 instruction byte swapping sequence from the decompressor's
head.S, and turn it into a rev_l GAS macro for general use. While
at it, make it use the 'rev' instruction when compiling for v6 or
later.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The R_INTC block controls more than just the NMI, and it is a different
hardware block than the NMI INTC found in some other Allwinner SoCs, so
the label "nmi_intc" is inaccurate. Name it "r_intc" to match the
compatible and to match the few references in the vendor documentation.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210118055040.21910-6-samuel@sholland.org
Bluetooth module on BananaPi M2 Zero can also be used for streaming
audio. However, for that case higher UART speed is required.
Add a max-speed property.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210116103710.245617-1-jernej.skrabec@siol.net
Bluetooth module on BananaPi M2 Plus can also be used for streaming
audio. However, for that case higher UART speed is required.
Add a max-speed property.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210116105228.847073-1-jernej.skrabec@siol.net
The SinA33 panel is missing its power-supply property, even though the
binding mandates it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-15-maxime@cerno.tech
The empty CSI port triggers a dt-validate warning. Let's align with the
other DTSI and remove it entirely, expecting the DTS to fill it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-14-maxime@cerno.tech
Our CSI endpoint trigger some DTC warnings due to the fact that we're
having a single endpoint that doesn't need any reg property, and since
we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.
Fix those
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-13-maxime@cerno.tech
While the USB PHY Device Tree mandates that the name of the ID detect pin
should be usb0_id_det-gpios, a significant number of device tree use
usb0_id_det-gpio instead.
This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-12-maxime@cerno.tech
Even though it translates to the same thing down to the binary level, we
should have an array of 2 number cells to describe each voltage state,
which in turns create a validation warning.
Let's fix this.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-11-maxime@cerno.tech
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
-----BEGIN PGP SIGNATURE-----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=oW7V
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Cleanup standard unit properties
of/device: Update dma_range_map only when dev has valid dma-ranges
ARM: zImage: atags_to_fdt: Fix node names on added root nodes
dt-bindings: usb: j721e: add ranges and dma-coherent props
dt-bindings:iio:adc: update adc.yaml reference
dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
ASoC: audio-graph-card: update audio-graph-card.yaml reference
Fixes the following W=1 kernel build warning(s):
drivers/clk/imx/clk-imx6sl.c:156:6: warning: no previous prototype for ‘imx6sl_set_wait_clk’ [-Wmissing-prototypes]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a "HPA1" prefix to the amplifiers on both audio cards, this is
done in order to get more consistency for userspace running on RDU2 and
RDU3, where we have two amplifiers on a single card device in the "Zest"
configuration.
Also adjust the card names to the new standard expected by userspace.
Signed-off-by: Cory Tusar <cory.tusar@zii.aero>
[adjusted commit message]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ALERT signaling happens on the falling edge of the signal, as rising
edge doesn't really have any notion, as it may happen much later (due to
shared IRQ line) or too early if the chip resolves the fault itself. So
only trigger the IRQ on the edge we are actually interested in.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use the reduced reporting mode the threshold values need to be set
explicitly. Configure the threshold to be less than 0.5% of the full
touchscreen range. This seems to be a good compromise between system
load and input accurancy.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current 25 Ohm drive-strength is much too strong, resulting in
significant overshoot of the signal. Reduce the drive-strength to
75 Ohm to get rid of those issues.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the i.MX6 WDOG1 internal watchdog for warm reboots. This allows
to issue emergency restarts without clearing the RAM, so collecting oops
logs from ramoops pstore in barebox becomes feasible.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the pinmux configuration for the eMMC on the Ouya to fix issues
with certain bootloaders.
-----BEGIN PGP SIGNATURE-----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=gGt5
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.12-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.12-rc1
Fixes the pinmux configuration for the eMMC on the Ouya to fix issues
with certain bootloaders.
* tag 'tegra-for-5.12-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: ouya: Fix eMMC on specific bootloaders
Link: https://lore.kernel.org/r/20210129193254.3610492-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a single fix that helps properly track the enable state
for various PLLs during suspend/resume.
-----BEGIN PGP SIGNATURE-----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=sqK+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.12-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc
ARM: tegra: Core changes for v5.12-rc1
This contains a single fix that helps properly track the enable state
for various PLLs during suspend/resume.
* tag 'tegra-for-5.12-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Don't enable unused PLLs on resume from suspend
Link: https://lore.kernel.org/r/20210129193254.3610492-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ouya fails to detect the eMMC module when booted via certain bootloaders.
Fastboot and hard-kexec bootloaders fail while u-boot does not. It was
discovered that the issue manifests if the sdmmc4 alternate configuration
clock pin is input disabled.
Ouya uses sdmmc4 in the primary pin configuration. It is unknown why this
occurs, though it is likely related to other eMMC limitations experienced
on Ouya.
For now, fix it by enabling input on cam_mclk_pcc0.
Fixes: d7195ac5c9c5 ("ARM: tegra: Add device-tree for Ouya")
Reported-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update email address for Roger and fix a typo
-----BEGIN PGP SIGNATURE-----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=QsAV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
SoC changes for omaps for v5.12 merge window
Update email address for Roger and fix a typo
* tag 'omap-for-v5.12/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix spellint typo
MAINTAINERS: Update address for OMAP GPMC driver
Link: https://lore.kernel.org/r/pull-1611845066-809577@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This includes the following earlier patches that were considered too
late for v5.11 as discussed between Arnd and me on freenode #armlinux
in December:
- More updates to use cpsw switchdev driver
- Enable gta04 PMIC power management
- Updates for dra7 for ECC support, 1.8GHz speed and keep the
ldo0 regulator always on as specified in the data manual
And then we have the new devicetree changes:
- Configure the original Amazon Echo to for audio
- Configure missing thermal interrupt for omap4430
- Configure mapphone devices for passive thermal cooling, and add
1.2GHz mode.
- Correct omap4430 sgx clock rate to use the runtime Android kernel
value, the earlier value was for a lower power operating point
- Drop turbo mode for 1GHz omap3 variants as we now have passive
cooling configured
- Update email address for Javier
- Add new MYIR Tech Limited board support
-----BEGIN PGP SIGNATURE-----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=HqBS
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.12 merge window
This includes the following earlier patches that were considered too
late for v5.11 as discussed between Arnd and me on freenode #armlinux
in December:
- More updates to use cpsw switchdev driver
- Enable gta04 PMIC power management
- Updates for dra7 for ECC support, 1.8GHz speed and keep the
ldo0 regulator always on as specified in the data manual
And then we have the new devicetree changes:
- Configure the original Amazon Echo to for audio
- Configure missing thermal interrupt for omap4430
- Configure mapphone devices for passive thermal cooling, and add
1.2GHz mode.
- Correct omap4430 sgx clock rate to use the runtime Android kernel
value, the earlier value was for a lower power operating point
- Drop turbo mode for 1GHz omap3 variants as we now have passive
cooling configured
- Update email address for Javier
- Add new MYIR Tech Limited board support
* tag 'omap-for-v5.12/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board
ARM: dts: omap3-igep: Change email address in copyright notice
ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
ARM: dts: motorola-mapphone: Add 1.2GHz OPP
ARM: dts: motorola-mapphone: Configure lower temperature passive cooling
ARM: dts: Configure missing thermal interrupt for 4430
ARM: dts: omap3-echo: Add speaker sound card support
ARM: dts: dra71-evm: mark ldo0 regulator as always on
ARM: dts: dra76x: add support for OPP_PLUS
ARM: dts: am574x-idk: add support for EMIF1 ECC
ARM: dts: omap3-gta04: fix twl4030-power settings
ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv
ARM: dts: am33xx-l4: add dt node for new cpsw switchdev driver
Link: https://lore.kernel.org/r/pull-1611845066-809577@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Split up the pins for each fan. This is needed in order to control them
Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Newer Linksys boards might come with a Winbond W29N02GV which can be
configured in different ways. Make sure we configure it the same way
as the older chips so everything keeps working.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
