IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When this driver preallocates some URBs, kmemleak is unable to find that
allocated memory when it scans. When the driver is unloaded, that memory
is reclaimed, therefore, the report is a false positive.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two types of messages queued for RX. The major type, which does
I/O on the device, was being handled properly. The skbs that communicated
with the firmware were being leaked.
While rewriting the code that sets up the skb, it was possible to remove
the private variable indicating that the old skb could be reused.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Routine r8712_usb_read_port() dereferences "precvbuf" before testing it
for NULL.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'lock' in 'intf_priv' is used as completion,
so convert it to a struct completion type.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'terminate_cmdthread_sema' is used as completion,
so convert it to a struct completion type.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'cmd_queue_sema' is used as completion,
so convert it to a struct completion type.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed alignment to match open parenthesis.
Signed-off-by: Parth Sane <laerdevstudios@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch drops the local definition of LIST_CONTAINOR(), and uses
container_of() instead of it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions like kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change null comparisons of the form x == NULL to !x.
This was done using Coccinelle.
@@ expression e;
@@
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes multiple "comparison to NULL"
checkpatch.pl issues:
CHECK: Comparison to NULL could be written "!pcmd"
+ if (pcmd == NULL)
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes several warnings caused by
malformed comments on hal_init.c and found by
checkpatch.pl.
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
People should not waste time and energy working on this staging driver.
At least four drivers were written for this hardware:
https://marc.info/?l=linux-wireless&m=138358275410975
And there is a replacement using the kernel wireless stack at:
https://github.com/chunkeey/rtl8192su
Also a fullmac/cfg80211 driver(r92su) is available.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Joshua Roys <Joshua.Roys@gtri.gatech.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linux Driver Project Developer List <driverdev-devel@linuxdriverproject.org>
Cc: Linux Wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function r8712_setptm_cmd and r8712_gettssi_cmd are not used
anywhere in the kernel so remove them. Also, remove their function
prototypes.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s1
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unnecessary parantheses on the right side of assignments were removed,
as in most cases (expect for ==, >=, <=, !=), they are futile.
This was done using Coccinelle, the semantic patch being:
@@
expression E1,E2,E3;
binary operator bin_op = {==,>=,<=,!=};
@@
E1 =
(
(
E2 bin_op E3
)
|
-(
E2
-)
)
;
Signed-off-by: G Pooja Shamili <poojashamili@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this file, function names are otherwise used as pointers without
&.
The Coccinelle semantic patch that is used to make this change is as
follows:
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
@m@
type T;
identifier f;
@@
T f(...);
@@
identifier m.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change null comparisons of the form x == NULL to !x.
This was done using Coccinelle.
@@
expression e;
@@
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete unnecessary local variable whose value is always 0 and
return 0 as the result.
The following Coccinelle script was used:
@@
identifier ret; expression E;
type T;
@@
(
- T ret;
|
- T ret = 0;
)
... when != \(ret=E
\|ret--\|ret++\|--ret\|++ret\|ret-=E\|ret+=E\|ret|=E\|ret&=E\)
(
?-ret = 0;
)
... when != \(ret=E
\|ret--\|ret++\|--ret\|++ret\|ret-=E\|ret+=E\|ret|=E\|ret&=E\)
(
return
- ret
+ 0
;
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions like kmalloc/usb_alloc_urb/kmalloc_array returns NULL as
their return value on failure. !x is generally preferred over x==NULL
or NULL==x so make use of !x if the value returned on failure
by these functions is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
S
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed parantheses on the right hand side of assignments as they are
not needed.
This was done with Coccinelle:
@@ expression a, b; @@
a =
- (
b
- )
;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplified the multiline check to a single return statement.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove exceptional '&' operator in front of a function name.
The Coccinelle semantic patch that is used to make this change is as
follows:
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
@m@
type T;
identifier f;
@@
T f(...);
@@
identifier m.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed checkpatch.pl warning 'Comparisons should place the constant on the
right side of the test'
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If 32 bytes of non zero are passed in pdata->pointer then the mac_pton
function will run off the end of the buffer. Make sure we always have a
terminated string kernel side.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "translate_scan" function in rtl8712 uses a lot of stack, and
gets inlined into its single caller, r8711_wx_get_scan, which
in some configurations now blows the 1024 byte stack warning
limit:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'r8711_wx_get_scan':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1227:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This somewhat reduces the stack usage by moving the translate_scan
function out of line with the noinline_for_stack annotation.
It might be possible to modify translate_scan() a little further
to reduce the stack usage, but with this patch, we can build without
the warning, the the call chain to get here is rather predictable
(sys_ioctl->vfs_ioctl->sock_ioctl->dev_ioctl->wext_ioctl->
r8711_wx_get_scan).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a driver hang caused by earlier suspend/resume cycles. By handling a
ENODEV error during suspend as a real error we eventually end up stopping
the whole driver.
Fix this by handling the ENODEV error (during suspend) essentially by
retrying.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare rtl871x_intf_resume() function static since it is defined and called
in this file only.
This fixes the following sparse warning:
warning: symbol 'rtl871x_intf_resume' was not declared. Should it be static?
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the variable ret is set at the beginning of the function and
never changes its value, we can just return the value it was set to.
Found using coccinelle with misc/returnvar.cocci.
Signed-off-by: Joseph Bisch <joseph.bisch@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: Comparisons should place the constant on the right side of the test
Fixed this warning by placing the constant on right side.
Signed-off-by: Rakhi Sharma <rakhish1994@gmail.com>-
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use list_first_entry_or_null() instead of list_empty() + LIST_CONTAINOR()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Warning:Comparisons should place the constant on the right side of the test
Fixed by placing the comparisions constant on right side of the test.
Signed-off-by: Rakhi Sharma <rakhish1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
->KeyMaterial is declared as a 16 byte array, but we only ever allocate
either 5 or 13 bytes of it. The problem is that we memset() all 16
bytes to zero so we're memsetting past the end of the allocated memory.
I fixed this in slightly lazy way, by just allocating 16 bytes. This
works but there is a lot more cleanup you could do to this code if you
wanted. Which is why this code is in staging.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The conversion from void pointer to any other pointer type is guaranteed
by the C programming language.
The semantic patch used to find this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T *)x)->f
|
- (T *)
e
)
Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
