IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.
This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.
The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.
So fix this inconsistency by correctly assigning USB2 PHYs.
Fixes: 9375e7d719b3 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.org
The eDP node includes two clocks which are used by the eDP PHY rather
than eDP controller itself. Drop these clocks to remove extra difference
between eDP and DP controllers.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-7-dmitry.baryshkov@linaro.org
Drop #address/#size-cells from eDP device node. For eDP the panels are
not described directly under the controller node. They are either
present under aux-bus child node, or they are declared separately (e.g.
in a /soc node).
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-6-dmitry.baryshkov@linaro.org
Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the deviice into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-5-dmitry.baryshkov@linaro.org
Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-4-dmitry.baryshkov@linaro.org
Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the device into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-3-dmitry.baryshkov@linaro.org
Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-2-dmitry.baryshkov@linaro.org
Move wcd specific pin conf to common file to support various
herbronie variant boards and to avoid duplicate nodes in dts files.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657197381-1271-1-git-send-email-quic_srivasam@quicinc.com
These voltages are not a multiple of the given step-size 8000 (with base
voltage 1664000) in pm8998_pldo, resulting in PLDO regulators l18 and
l22 failing to validate and in turn not probing the rpm-pm8998-regulator
driver:
l18: unsupportable voltage constraints 2856000-2848000uV
qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: l18: devm_regulator_register() failed, ret=-22
Round the voltages down for the sake of erring on the safe side, leaving
a comment in place to document this discrepancy wrt downstream sources.
Fixes: 390883af89d2 ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507153627.1478268-1-marijn.suijten@somainline.org
It seems the SM6350_CX definition was temporarily replaced with its
literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2
nodes") to prevent a dependency on the qcom-rpmpd.h header patch being
available prior to this DT patch being applied, similar to c23f1b77358c
("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX").
However, unlike the revert of that in the sm6125 tree the next merge
window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid
using missing SM6125_VDDCX""), this has not yet happened for sm6350:
replace them back now that the definitions are definitely available.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507224645.2238421-1-marijn.suijten@somainline.org
Add interrupt-parent to the SoC DTSI to avoid duplicating it in each board
DTS file.
Remove interrupt-parent from existing board DTS files.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708133846.599735-2-robimarko@gmail.com
Add #size-cells and #address-cells to the SoC DTSI to avoid duplicating
the same properties in board DTS files.
Remove the mentioned properties from current board DTS files.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708133846.599735-1-robimarko@gmail.com
APCS now has support for providing the APSS clocks as the child device
for IPQ8074.
So, add the required DT node for it as it will later be used as the CPU
clocksource.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Sorted node based on address]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com
The timer node needs ranges specified to map the 1-cell children to the
2-cell address range used in /soc. This addition never made it into the
patch that was posted and merged, so add it now.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707160858.3178771-1-bjorn.andersson@linaro.org
Fix the usb_0 HS PHY reference clock which was mistakingly replaced with
the first usb_2 PHY clock.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708072358.4583-1-johan+linaro@kernel.org
The recent commit that dropped the PCIe PHY clock index failed to update
the PCIe node reference.
Fixes: 531c738fb360 ("arm64: dts: qcom: sc7280: drop PCIe PHY clock index")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707064222.15717-1-johan+linaro@kernel.org
Clean up the PCIe PHY nodes by using a non-empty ranges property.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-14-johan+linaro@kernel.org
The QMP UFS PHY provides more than one symbol clock and would need an
index to differentiate the clocks, but none of this is described by the
binding currently.
Drop the incorrect '#clock-cells' property for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-12-johan+linaro@kernel.org
The QMP UFS PHY provides more than one symbol clock and would need an
index to differentiate the clocks, but none of this is described by the
binding currently.
Drop the incorrect '#clock-cells' property for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-11-johan+linaro@kernel.org
The QMP UFS PHY provides more than one symbol clock and would need an
index to differentiate the clocks, but none of this is described by the
binding currently.
Drop the incorrect '#clock-cells' property for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-10-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-8-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-7-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-5-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-4-johan+linaro@kernel.org
This reverts commit afcbe252e9c19161e4d4c95f33faaf592f1de086.
The commit in question caused my sc7280-herobrine-herobrine-r1 board
not to boot anymore. This shouldn't be too surprising since the driver
is relying on the name "cqhci".
The issue seems to be that someone decided to change the names of
things when the binding moved from .txt to .yaml. We should go back to
the names that the bindings have historically specified.
For some history, see commit d3392339cae9 ("mmc: cqhci: Update cqhci
memory ioresource name") and commit d79100c91ae5 ("dt-bindings: mmc:
sdhci-msm: Add CQE reg map").
Fixes: afcbe252e9c1 ("arm64: dts: qcom: Fix 'reg-names' for sdhci nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706144706.1.I48f35820bf3670d54940110462555c2d0a6d5eb2@changeid
To ease merging of bindings and dts files, the constants were replaced
with numeric values. Change them back to defined constants.
While we are at it, fix the indentation of these clocks properties to
follow established guidelines.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-2-dmitry.baryshkov@linaro.org
Add reset to SDHCI controller so it can be reset to avoid timeout issues
after software reset due to bootloader set configuration.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com
Add device node for CPU-memory BWMON device (bandwidth monitoring) on
SDM845 measuring bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-5-krzysztof.kozlowski@linaro.org
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Moved node after "soc" for alphabetical ordering]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com
Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1656690436-15221-1-git-send-email-quic_khsieh@quicinc.com
Switch from the flat PC idle states of sdm845 to OSI hierarchical idle
states. The exceptions are the cheza plaftorms, which need to remain with
PC idle states. So in order allow all the other platforms to switch,
while cheza platforms to remain the same, replace the PC idle states with
the OSI ones in the main SDM845 dtsi, and then override the inherited OSI
states with PC ones, delete inherited psci cpus nodes, domain idle states
and power domain properties.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220630101403.1888541-1-abel.vesa@linaro.org
First device specific compatible, then general one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626183247.142776-2-david@ixit.cz
Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.
Currently supported features:
- Display via simplefb (panel driver is WIP)
- Keys
- Micro SD card
- Modem (not tested much, but initialises)
- UFS (crashes during intensive workloads, may need quirks)
- USB in peripheral mode
Notable missing features:
- Enabling WiFi causes a remoteproc crash, so it's disabled here.
Needs to be debugged - ideas welcome!
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Tested-by: Gregari Ivanov <llamashere@posteo.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-2-newbie13xd@gmail.com
Add missing GCC clock sources. This includes PCIe and USB PIPE and UFS
symbol clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-4-dmitry.baryshkov@linaro.org
The commit 82d61e19fccb ("arm64: dts: qcom: msm8996: Move '#clock-cells'
to QMP PHY child node") moved the '#clock-cells' properties to the child
nodes. However it missed the fact that the property must have been set
to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate
function. Also the mentioned commit didn't add '#clock-cells' properties
to second and third PCIe PHY nodes. Correct both these mistakes:
- Set '#clock-cells' to <0>,
- Add the property to pciephy_1 and pciephy_2 nodes.
Fixes: 82d61e19fccb ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-3-dmitry.baryshkov@linaro.org
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-2-marijn.suijten@somainline.org
Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.
The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.
As a drive-by cleanup, reorder bias- and drive-strength properties.
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org
