IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add Zstandard compression as the 4th supported algorithm since it
becomes more popular now and some end users have asked this for
quite a while [1][2].
Each EROFS physical cluster contains only one valid standard
Zstandard frame as described in [3] so that decompression can be
performed on a per-pcluster basis independently.
Currently, it just leverages multi-call stream decompression APIs with
internal sliding window buffers. One-shot or bufferless decompression
could be implemented later for even better performance if needed.
[1] https://github.com/erofs/erofs-utils/issues/6
[2] https://lore.kernel.org/r/Y08h+z6CZdnS1XBm@B-P7TQMD6M-0146.lan
[3] https://www.rfc-editor.org/rfc/rfc8478.txt
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240508234453.17896-1-xiang@kernel.org
This adds a special global buffer pool (in the end) for reserved pages.
Using a reserved pool for LZ4 decompression significantly reduces the
time spent on extra temporary page allocation for the extreme cases in
low memory scenarios.
The table below shows the reduction in time spent on page allocation for
LZ4 decompression when using a reserved pool. The results were obtained
from multi-app launch benchmarks on ARM64 Android devices running the
5.15 kernel with an 8-core CPU and 8GB of memory. In the benchmark, we
launched 16 frequently-used apps, and the camera app was the last one in
each round. The data in the table is the average time of camera app for
each round.
After using the reserved pool, there was an average improvement of 150ms
in the overall launch time of our camera app, which was obtained from
the systrace log.
+--------------+---------------+--------------+---------+
| | w/o page pool | w/ page pool | diff |
+--------------+---------------+--------------+---------+
| Average (ms) | 3434 | 21 | -99.38% |
+--------------+---------------+--------------+---------+
Based on the benchmark logs, 64 pages are sufficient for 95% of
scenarios. This value can be adjusted with a module parameter
`reserved_pages`. The default value is 0.
This pool is currently only used for the LZ4 decompressor, but it can be
applied to more decompressors if needed.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240402131523.2703948-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
It will cost more time if compressed buffers are allocated on demand for
low-latency algorithms (like lz4) so EROFS uses per-CPU buffers to keep
compressed data if in-place decompression is unfulfilled. While it is kind
of wasteful of memory for a device with hundreds of CPUs, and only a small
number of CPUs concurrently decompress most of the time.
This patch renames it as 'global buffer pool' and makes it configurable.
This allows two or more CPUs to share a common buffer to reduce memory
occupation.
Suggested-by: Gao Xiang <xiang@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Link: https://lore.kernel.org/r/20240402100036.2673604-1-guochunhai@vivo.com
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Link: https://lore.kernel.org/r/20240408215231.3376659-1-dhavale@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
syzbot reports a KMSAN reproducer [1] which generates a crafted
filesystem image and causes IMA to read uninitialized page cache.
Later, (rq->outputsize > rq->inputsize) will be formally supported
after either large uncompressed pclusters (> block size) or big
lclusters are landed. However, currently there is no way to generate
such filesystems by using mkfs.erofs.
Thus, let's mark this condition as unsupported for now.
[1] https://lore.kernel.org/r/0000000000002be12a0611ca7ff8@google.com
Reported-and-tested-by: syzbot+7bc44a489f0ef0670bd5@syzkaller.appspotmail.com
Fixes: 1ca0152014 ("erofs: refine z_erofs_transform_plain() for sub-page block support")
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240304035339.425857-1-hsiangkao@linux.alibaba.com
Even with inplace decompression, sometimes very few temporary buffers
may be still needed for a single decompression shot (e.g. 16 pages for
64k sliding window or 4 pages for 16k sliding window). In low-memory
scenarios, it would be better to try to allocate with GFP_NOWAIT on
readahead first. That can help reduce the time spent on page allocation
under durative memory pressure.
Here are detailed performance numbers under multi-app launch benchmark
workload [1] on ARM64 Android devices (8-core CPU and 8GB of memory)
running a 5.15 LTS kernel with EROFS of 4k pclusters:
+----------------------------------------------+
| LZ4 | vanilla | patched | diff |
|----------------+---------+---------+---------|
| Average (ms) | 3364 | 2684 | -20.21% | [64k sliding window]
|----------------+---------+---------+---------|
| Average (ms) | 2079 | 1610 | -22.56% | [16k sliding window]
+----------------------------------------------+
The total size of system images for 4k pclusters is almost unchanged:
(64k sliding window) 9,117,044 KB
(16k sliding window) 9,113,096 KB
Therefore, in addition to switch the sliding window from 64k to 16k,
after applying this patch, it can eventually save 52.14% (3364 -> 1610)
on average with no memory reservation. That is particularly useful for
embedded devices with limited resources.
[1] https://lore.kernel.org/r/20240109074143.4138783-1-guochunhai@vivo.com
Suggested-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20240126140142.201718-1-hsiangkao@linux.alibaba.com
- Fix a "BUG: kernel NULL pointer dereference" issue due to
inconsistent on-disk indices of compressed inodes against
per-sb `available_compr_algs` generated by Syzkaller;
- Don't use certain unnecessary folio_*() helpers if the folio
type (page cache) is known.
-----BEGIN PGP SIGNATURE-----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=knvn
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.8-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix a "BUG: kernel NULL pointer dereference" issue due to
inconsistent on-disk indices of compressed inodes against
per-sb `available_compr_algs` generated by Syzkaller
- Don't use certain unnecessary folio_*() helpers if the folio
type (page cache) is known
* tag 'erofs-for-6.8-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: Don't use certain unnecessary folio_*() functions
erofs: fix inconsistent per-file compression format
EROFS can select compression algorithms on a per-file basis, and each
per-file compression algorithm needs to be marked in the on-disk
superblock for initialization.
However, syzkaller can generate inconsistent crafted images that use
an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA
algorithmtype even it's not set in `sbi->available_compr_algs`. This
can lead to an unexpected "BUG: kernel NULL pointer dereference" if
the corresponding decompressor isn't built-in.
Fix this by checking against `sbi->available_compr_algs` for each
m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset
bitmap is now fixed together since it was harmless previously.
Reported-by: <bugreport@ubisectech.com>
Fixes: 8f89926290 ("erofs: get compression algorithms directly on mapping")
Fixes: 622ceaddb7 ("erofs: lzma compression support")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20240113150602.1471050-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Syzbot reported a KMSAN warning,
erofs: (device loop0): z_erofs_lz4_decompress_mem: failed to decompress -12 in[46, 4050] out[917]
=====================================================
BUG: KMSAN: uninit-value in hex_dump_to_buffer+0xae9/0x10f0 lib/hexdump.c:194
..
print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276
z_erofs_lz4_decompress_mem fs/erofs/decompressor.c:252 [inline]
z_erofs_lz4_decompress+0x257e/0x2a70 fs/erofs/decompressor.c:311
z_erofs_decompress_pcluster fs/erofs/zdata.c:1290 [inline]
z_erofs_decompress_queue+0x338c/0x6460 fs/erofs/zdata.c:1372
z_erofs_runqueue+0x36cd/0x3830
z_erofs_read_folio+0x435/0x810 fs/erofs/zdata.c:1843
The root cause is that the printed decompressed buffer may be filled
incompletely due to decompression failure. Since they were once only
used for debugging, get rid of them now.
Reported-and-tested-by: syzbot+6c746eea496f34b3161d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000321c24060d7cfa1c@google.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227151903.2900413-1-hsiangkao@linux.alibaba.com
Sub-page block support is still unusable even with previous commits if
interlaced PLAIN pclusters exist. Such pclusters can be found if the
fragment feature is enabled.
This commit tries to handle "the head part" of interlaced PLAIN
pclusters first: it was once explained in commit fdffc091e6 ("erofs:
support interlaced uncompressed data for compressed files").
It uses a unique way for both shifted and interlaced PLAIN pclusters.
As an added bonus, PLAIN pclusters larger than the block size is also
supported now for the upcoming large lclusters.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-5-hsiangkao@linux.alibaba.com
Currently EROFS can map another compressed buffer for inplace
decompression, that was used to handle the cases that some pages of
compressed data are actually not in-place I/O.
However, like most simple LZ77 algorithms, LZ4 expects the compressed
data is arranged at the end of the decompressed buffer and it
explicitly uses memmove() to handle overlapping:
__________________________________________________________
|_ direction of decompression --> ____ |_ compressed data _|
Although EROFS arranges compressed data like this, it typically maps two
individual virtual buffers so the relative order is uncertain.
Previously, it was hardly observed since LZ4 only uses memmove() for
short overlapped literals and x86/arm64 memmove implementations seem to
completely cover it up and they don't have this issue. Juhyung reported
that EROFS data corruption can be found on a new Intel x86 processor.
After some analysis, it seems that recent x86 processors with the new
FSRM feature expose this issue with "rep movsb".
Let's strictly use the decompressed buffer for lz4 inplace
decompression for now. Later, as an useful improvement, we could try
to tie up these two buffers together in the correct order.
Reported-and-tested-by: Juhyung Park <qkrwngud825@gmail.com>
Closes: https://lore.kernel.org/r/CAD14+f2AVKf8Fa2OO1aAUdDNTDsVzzR6ctU_oJSmTyd6zSYR2Q@mail.gmail.com
Fixes: 0ffd71bcc3 ("staging: erofs: introduce LZ4 decompression inplace")
Fixes: 598162d050 ("erofs: support decompress big pcluster for lz4 backend")
Cc: stable <stable@vger.kernel.org> # 5.4+
Tested-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206045534.3920847-1-hsiangkao@linux.alibaba.com
Move erofs_load_compr_cfgs() into decompressor.c as well as introduce
a callback instead of a hard-coded switch for each algorithm for
simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231022130957.11398-1-xiang@kernel.org
Add DEFLATE compression as the 3rd supported algorithm.
DEFLATE is a popular generic-purpose compression algorithm for quite
long time (many advanced formats like gzip, zlib, zip, png are all
based on that) as Apple documentation written "If you require
interoperability with non-Apple devices, use COMPRESSION_ZLIB. [1]".
Due to its popularity, there are several hardware on-market DEFLATE
accelerators, such as (s390) DFLTCC, (Intel) IAA/QAT, (HiSilicon) ZIP
accelerator, etc. In addition, there are also several high-performence
IP cores and even open-source FPGA approches available for DEFLATE.
Therefore, it's useful to support DEFLATE compression in order to find
a way to utilize these accelerators for asynchronous I/Os and get
benefits from these later.
Besides, it's a good choice to trade off between compression ratios
and performance compared to LZ4 and LZMA. The DEFLATE core format is
simple as well as easy to understand, therefore the code size of its
decompressor is small even for the bootloader use cases. The runtime
memory consumption is quite limited too (e.g. 32K + ~7K for each zlib
stream). As usual, EROFS ourperforms similar approaches too.
Alternatively, DEFLATE could still be used for some specific files
since EROFS supports multiple compression algorithms in one image.
[1] https://developer.apple.com/documentation/compression/compression_algorithm
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230810154859.118330-1-hsiangkao@linux.alibaba.com
Use memcpy_to_page() instead of open-coding them.
In addition, add a missing flush_dcache_page() even though almost all
modern architectures clear `PG_dcache_clean` flag for new file cache
pages so that it doesn't change anything in practice.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230627161240.331-2-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
No need this helper since it's just a simple wrapper for decompress
method and only one caller. So, let's fold in directly instead.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230426084449.12781-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
As the first step of converting hardcoded blocksize to that specified in
on-disk superblock, convert all call sites of hardcoded blocksize to
sb->s_blocksize except for:
1) use sbi->blkszbits instead of sb->s_blocksize in
erofs_superblock_csum_verify() since sb->s_blocksize has not been
updated with the on-disk blocksize yet when the function is called.
2) use inode->i_blkbits instead of sb->s_blocksize in erofs_bread(),
since the inode operated on may be an anonymous inode in fscache mode.
Currently the anonymous inode is allocated from an anonymous mount
maintained in erofs, while in the near future we may allocate anonymous
inodes from a generic API directly and thus have no access to the
anonymous inode's i_sb. Thus we keep the block size in i_blkbits for
anonymous inodes in fscache mode.
Be noted that this patch only gets rid of the hardcoded blocksize, in
preparation for actually setting the on-disk block size in the following
patch. The hard limit of constraining the block size to PAGE_SIZE still
exists until the next patch.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230313135309.75269-2-jefflexu@linux.alibaba.com
[ Gao Xiang: fold a patch to fix incorrect truncated offsets. ]
Link: https://lore.kernel.org/r/20230413035734.15457-1-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Currently, uncompressed data is all handled in the shifted way, which
means we have to shift the whole on-disk plain pcluster to get the
logical data. However, since we are also using in-place I/O for
uncompressed data, data copy will be reduced a lot if pcluster is
recorded in the interlaced way as illustrated below:
_______________________________________________________________
| | | |_ tail part |_ head part _|
|<- blk0 ->| .. |<- blkn-2 ->|<- blkn-1 ->|
The logical data then becomes:
________________________________________________________
|_ head part _|_ blk0 _| .. |_ blkn-2 _|_ tail part _|
In addition, non-4k plain pclusters are also survived by the
interlaced way, which can be used for non-4k lclusters as well.
However, it's almost impossible to de-duplicate uncompressed data
in the interlaced way, therefore shifted uncompressed data is still
useful.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/8369112678604fdf4ef796626d59b1fdd0745a53.1663898962.git.huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Let's introduce multi-reference pclusters at runtime. In details,
if one pcluster is requested by multiple extents at almost the same
time (even belong to different files), the longest extent will be
decompressed as representative and the other extents are actually
copied from the longest one in one round.
After this patch, fully-referenced extents can be correctly handled
and the full decoding check needs to be bypassed for
partial-referenced extents.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-17-hsiangkao@linux.alibaba.com
Currently, vmap()s are avoided if physical addresses are
consecutive for decompressed buffers.
I observed that is very common for 4KiB pclusters since the
numbers of decompressed pages are almost 2 or 3.
However, such detection doesn't work for Highmem pages on
32-bit machines, let's fix it now.
Reported-by: Liu Jinbao <liujinbao1@xiaomi.com>
Fixes: 7fc45dbc93 ("staging: erofs: introduce generic decompression backend")
Link: https://lore.kernel.org/r/20220708101001.21242-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
I got some KASAN report as below:
[ 46.959738] ==================================================================
[ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188
...
[ 46.960430] Call Trace:
[ 46.960430] <TASK>
[ 46.960430] dump_stack_lvl+0x41/0x5e
[ 46.960430] print_report.cold+0xb2/0x6b7
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_report+0x8a/0x140
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_check_range+0x14d/0x1d0
[ 46.960430] memcpy+0x20/0x60
[ 46.960430] z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080
The root cause is that the tail pcluster won't be a complete filesystem
block anymore. So if ztailpacking is used, the second part of an
uncompressed tail pcluster may not be ``rq->pageofs_out``.
Fixes: ab749badf9 ("erofs: support unaligned data decompression")
Fixes: cecf864d3d ("erofs: support inline data decompression")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220512115833.24175-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The big pcluster feature has been merged for a year, it has been mostly
stable now.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220407050505.12683-1-huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, compressed data was assumed as block-aligned. This
should be changed due to in-block tail-packing inline data.
Link: https://lore.kernel.org/r/20211228054604.114518-4-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
To prepare for the upcoming ztailpacking feature, introduce
z_erofs_fixup_insize() and pageofs_in to wrap up the process
to get the exact compressed size via zero padding.
Link: https://lore.kernel.org/r/20211228054604.114518-3-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
To prepare for the upcoming ztailpacking feature and further
cleanups, introduce a unique z_erofs_lz4_decompress_ctx to keep
the context, including inpages, outpages and oend, which are
frequently used by the lz4 decompressor.
No logic changes.
Link: https://lore.kernel.org/r/20211228054604.114518-2-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Renaming lz4_0padding to zero_padding globally since LZMA and later
algorithms also need that.
Link: https://lore.kernel.org/r/20211112160935.19394-1-jnhuang95@gmail.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Currently, ->lru is a way to arrange non-LRU pages and has some
in-kernel users. In order to minimize noticable issues of page
reclaim and cache thrashing under high memory presure, limited
temporary pages were all chained with ->lru and can be reused
during the request. However, it seems that ->lru could be removed
when folio is landing.
Let's use page->private to chain temporary pages for now instead
and transform EROFS formally after the topic of the folio / file
page design is finalized.
Link: https://lore.kernel.org/r/20211022090120.14675-1-hsiangkao@linux.alibaba.com
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add MicroLZMA support in order to maximize compression ratios for
specific scenarios. For example, it's useful for low-end embedded
boards and as a secondary algorithm in a file for specific access
patterns.
MicroLZMA is a new container format for raw LZMA1, which was created
by Lasse Collin aiming to minimize old LZMA headers and get rid of
unnecessary EOPM (end of payload marker) as well as to enable
fixed-sized output compression, especially for 4KiB pclusters.
Similar to LZ4, inplace I/O approach is used to minimize runtime
memory footprint when dealing with I/O. Overlapped decompression is
handled with 1) bounced buffer for data under processing or 2) extra
short-lived pages from the on-stack pagepool which will be shared in
the same read request (128KiB for example).
Link: https://lore.kernel.org/r/20211010213145.17462-8-xiang@kernel.org
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, some LZ4 methods were named with `generic'. However, while
evaluating the effective LZMA approach, it seems they aren't quite
generic at all (e.g. no need preparing dstpages for most LZMA cases.)
Avoid such naming instead.
Link: https://lore.kernel.org/r/20211010213145.17462-7-xiang@kernel.org
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
As Xiang mentioned, such path has no real impact to our current
decompression strategy, remove it directly. Also, update the return
value of z_erofs_lz4_decompress() to 0 if success to keep consistent
with LZMA which will return 0 as well for that case.
Link: https://lore.kernel.org/r/20211014065744.1787-1-zbestahu@gmail.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Prior to big pcluster, there was only one compressed page so it'd
easy to map this. However, when big pcluster is enabled, more work
needs to be done to handle multiple compressed pages. In detail,
- (maptype 0) if there is only one compressed page + no need
to copy inplace I/O, just map it directly what we did before;
- (maptype 1) if there are more compressed pages + no need to
copy inplace I/O, vmap such compressed pages instead;
- (maptype 2) if inplace I/O needs to be copied, use per-CPU
buffers for decompression then.
Another thing is how to detect inplace decompression is feasable or
not (it's still quite easy for non big pclusters), apart from the
inplace margin calculation, inplace I/O page reusing order is also
needed to be considered for each compressed page. Currently, if the
compressed page is the xth page, it shouldn't be reused as [0 ...
nrpages_out - nrpages_in + x], otherwise a full copy will be triggered.
Although there are some extra optimization ideas for this, I'd like
to make big pcluster work correctly first and obviously it can be
further optimized later since it has nothing with the on-disk format
at all.
Link: https://lore.kernel.org/r/20210407043927.10623-10-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Adjust per-CPU buffers on demand since big pcluster definition is
available. Also, bail out unsupported pcluster size according to
Z_EROFS_PCLUSTER_MAX_SIZE.
Link: https://lore.kernel.org/r/20210407043927.10623-7-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
To deal the with the cases which inplace decompression is infeasible
for some inplace I/O. Per-CPU buffers was introduced to get rid of page
allocation latency and thrash for low-latency decompression algorithms
such as lz4.
For the big pcluster feature, introduce multipage per-CPU buffers to
keep such inplace I/O pclusters temporarily as well but note that
per-CPU pages are just consecutive virtually.
When a new big pcluster fs is mounted, its max pclustersize will be
read and per-CPU buffers can be growed if needed. Shrinking adjustable
per-CPU buffers is more complex (because we don't know if such size
is still be used), so currently just release them all when unloading.
Link: https://lore.kernel.org/r/20210409190630.19569-1-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Add a bitmap for available compression algorithms and a variable-sized
on-disk table for compression options in preparation for upcoming big
pcluster and LZMA algorithm, which follows the end of super block.
To parse the compression options, the bitmap is scanned one by one.
For each available algorithm, there is data followed by 2-byte `length'
correspondingly (it's enough for most cases, or entire fs blocks should
be used.)
With such available algorithm bitmap, kernel itself can also refuse to
mount such filesystem if any unsupported compression algorithm exists.
Note that COMPR_CFGS feature will be enabled with BIG_PCLUSTER.
Link: https://lore.kernel.org/r/20210329100012.12980-1-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Introduce z_erofs_lz4_cfgs to store all lz4 configurations.
Currently it's only max_distance, but will be used for new
features later.
Link: https://lore.kernel.org/r/20210329012308.28743-4-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
lz4 uses LZ4_DISTANCE_MAX to record history preservation. When
using rolling decompression, a block with a higher compression
ratio will cause a larger memory allocation (up to 64k). It may
cause a large resource burden in extreme cases on devices with
small memory and a large number of concurrent IOs. So appropriately
reducing this value can improve performance.
Decreasing this value will reduce the compression ratio (except
when input_size <LZ4_DISTANCE_MAX). But considering that erofs
currently only supports 4k output, reducing this value will not
significantly reduce the compression benefits.
The maximum value of LZ4_DISTANCE_MAX defined by lz4 is 64k, and
we can only reduce this value. For the old kernel, it just can't
reduce the memory allocation during rolling decompression without
affecting the decompression result.
Link: https://lore.kernel.org/r/20210329012308.28743-3-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
[ Gao Xiang: introduce struct erofs_sb_lz4_info for configurations. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Introduce erofs_sb_has_xxx() to make long checks short, especially
for later big pcluster & LZMA features.
Link: https://lore.kernel.org/r/20210329012308.28743-2-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Currently, err would be treated as io error. Therefore, it'd be
better to ensure memory allocation during rolling decompression
to avoid such io error.
In the long term, we might consider adding another !Uptodate case
for such case.
Link: https://lore.kernel.org/r/20210316031515.90954-1-huangjianan@oppo.com
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Previously, we played around with magical page->mapping for short-lived
temporary pages since we need to identify different types of pages in
the same pcluster but both invalidated and short-lived temporary pages
can have page->mapping == NULL. It was considered as safe because that
temporary pages are all non-LRU / non-movable pages.
This patch tends to use specific page->private to identify short-lived
pages instead so it won't rely on page->mapping anymore. Details are
described in "compress.h" as well.
Link: https://lore.kernel.org/r/20201208095834.3133565-1-hsiangkao@redhat.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713130944.34419-1-grandmaster@al2klimov.de
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
This is always PAGE_KERNEL - for long term mappings with other properties
vmap should be used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-19-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Lasse pointed out, "Looking at fs/erofs/decompress.c,
the return value from LZ4_decompress_safe_partial is only
checked for negative value to catch errors. ... So if
I understood it correctly, if there is bad data whose
uncompressed size is much less than it should be, it can
leave part of the output buffer untouched and expose the
previous data as the file content. "
Let's fix it now.
Cc: Lasse Collin <lasse.collin@tukaani.org>
Fixes: 7fc45dbc93 ("staging: erofs: introduce generic decompression backend")
[ Gao Xiang: v5.3+, I will manually backport this to stable later. ]
Link: https://lore.kernel.org/r/20200226081008.86348-3-gaoxiang25@huawei.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
As Lasse pointed out, "EROFS uses LZ4_decompress_safe_partial
for both partial and full blocks. Thus when it is decoding a
full block, it doesn't know if the LZ4 decoder actually decoded
all the input. The real uncompressed size could be bigger than
the value stored in the file system metadata.
Using LZ4_decompress_safe instead of _safe_partial when
decompressing a full block would help to detect errors."
So it's reasonable to use _safe in case of potential corrupted
images and it might have some speed gain as well although
I didn't observe much difference.
Note that legacy compressor (< 5.3, no LZ4_0PADDING) could
encode extra data in a pcluster, which is excluded as well.
Cc: Lasse Collin <lasse.collin@tukaani.org>
Fixes: 0ffd71bcc3 ("staging: erofs: introduce LZ4 decompression inplace")
[ Gao Xiang: v5.3+, I will manually backport this to stable later. ]
Link: https://lore.kernel.org/r/20200226081008.86348-2-gaoxiang25@huawei.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
rq->out[1] should be valid before accessing. Otherwise,
in very rare cases, out-of-bound dirty onstack rq->out[1]
can equal to *in and lead to unintended memmove behavior.
Link: https://lore.kernel.org/r/20200107022546.19432-1-gaoxiang25@huawei.com
Fixes: 7fc45dbc93 ("staging: erofs: introduce generic decompression backend")
Cc: <stable@vger.kernel.org> # 5.3+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Add prefix "erofs_" to these functions and print
sb->s_id as a prefix to erofs_{err, info} so that
the user knows which file system is affected.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-23-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph said [1],
"vm_map_ram is supposed to generally behave better. So if
it doesn't please report that that to the arch maintainer
and linux-mm so that they can look into the issue. Having
user make choices of deep down kernel internals is just
a horrible interface.
Please talk to maintainers of other bits of the kernel
if you see issues and / or need enhancements. "
Let's redo the previous conclusion and kill the vmap
approach.
[1] https://lore.kernel.org/r/20190830165533.GA10909@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-21-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
