IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
To prevent injection information from being lost on bfq_queue merging,
also the amount of service that a bfq_queue receives must be saved and
restored when the bfq_queue is merged and split, respectively.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To prevent weight-raising information from being lost on bfq_queue merging,
also the amount of service that a bfq_queue receives must be saved and
restored when the bfq_queue is merged and split, respectively.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A bfq_queue may happen to be deemed as soft real-time while it is
still enjoying interactive weight-raising. If this happens because of
a false positive, then the bfq_queue is likely to loose its soft
real-time status soon. Upon losing such a status, the bfq_queue must
get back its interactive weight-raising, if its interactive period is
not over yet. But this case is not handled. This commit corrects this
error.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Upon an I/O-dispatch attempt, BFQ may detect that it was better to
plug I/O dispatch, and to wait for a new request to arrive for the
currently in-service queue. But the arrival of a new request for an
empty bfq_queue, and thus the switch from idle to busy of the
bfq_queue, may cause the scenario to change, and make plugging no
longer needed for service guarantees, or more convenient for
throughput. In this case, keeping I/O-dispatch plugged would certainly
lower throughput.
To address this issue, this commit makes such a check, and stops
plugging I/O if it is better to stop plugging I/O.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some BFQ mechanisms make their decisions on a bfq_queue basing also on
whether the bfq_queue is I/O bound. In this respect, the current logic
for evaluating whether a bfq_queue is I/O bound is rather rough. This
commits replaces this logic with a more effective one.
The new logic measures the percentage of time during which a bfq_queue
is active, and marks the bfq_queue as I/O bound if the latter if this
percentage is above a fixed threshold.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When an already remapped bio is resubmitted (e.g. by blk_queue_split),
bio_check_eod will compare the remapped bi_sector against the size
of the partition, leading to spurious I/O failures.
Skip the EOD check in this case.
Fixes: 309dca309f ("block: store a block_device pointer in struct bio")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer spends quite a while in blkdev_direct_IO() to copy and
initialise bio's bvec. However, if we've already got a bvec in the input
iterator it might be reused in some cases, i.e. when new
ITER_BVEC_FLAG_FIXED flag is set. Simple tests show considerable
performance boost, and it also reduces memory footprint.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Direct IO does not operate on the current working set of pages managed
by the kernel, so it should not be accounted as memory stall to PSI
infrastructure.
The block layer and iomap direct IO use bio_iov_iter_get_pages()
to build bios, and they are the only users of it, so to avoid PSI
tracking for them clear out BIO_WORKINGSET flag. Do same for
dio_bio_submit() because fs/direct_io constructs bios by hand directly
calling bio_add_page().
Reported-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bvec_alloc(), bvec_free() and bvec_nr_vecs() are only used inside block
layer core functions, no need to declare them in public header.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bvec_alloc() may allocate more bio vectors than requested, so set
.bi_max_vecs as actual allocated vector number, instead of the requested
number. This way can help fs build bigger bio because new bio often won't
be allocated until the current one becomes full.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The inline bvecs won't be used if user needn't bvecs by not passing
BIOSET_NEED_BVECS, so don't allocate bvecs in this situation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
q->bio_split is only used by bio_split() for fast cloning bio, and no
need to allocate bvecs, so remove this flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Managing bio slab cache via xarray by using slab cache size as xarray
index, and storing 'struct bio_slab' instance into xarray.
So code is simplified a lot, meantime it becomes more readable than before.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As we can see, returns parent_sched_may_change whether
sd->next_in_service changes or not, so remove this judgment.
Signed-off-by: huhai <huhai@tj.kylinos.cn>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently when non-mq aware IO scheduler (BFQ, mq-deadline) is used for
a queue with multiple HW queues, the performance it rather bad. The
problem is that these IO schedulers use queue-wide locking and their
dispatch function does not respect the hctx it is passed in and returns
any request it finds appropriate. Thus locality of request access is
broken and dispatch from multiple CPUs just contends on IO scheduler
locks. For these IO schedulers there's little point in dispatching from
multiple CPUs. Instead dispatch always only from a single CPU to limit
contention.
Below is a comparison of dbench runs on XFS filesystem where the storage
is a raid card with 64 HW queues and to it attached a single rotating
disk. BFQ is used as IO scheduler:
clients MQ SQ MQ-Patched
Amean 1 39.12 (0.00%) 43.29 * -10.67%* 36.09 * 7.74%*
Amean 2 128.58 (0.00%) 101.30 * 21.22%* 96.14 * 25.23%*
Amean 4 577.42 (0.00%) 494.47 * 14.37%* 508.49 * 11.94%*
Amean 8 610.95 (0.00%) 363.86 * 40.44%* 362.12 * 40.73%*
Amean 16 391.78 (0.00%) 261.49 * 33.25%* 282.94 * 27.78%*
Amean 32 324.64 (0.00%) 267.71 * 17.54%* 233.00 * 28.23%*
Amean 64 295.04 (0.00%) 253.02 * 14.24%* 242.37 * 17.85%*
Amean 512 10281.61 (0.00%) 10211.16 * 0.69%* 10447.53 * -1.61%*
Numbers are times so lower is better. MQ is stock 5.10-rc6 kernel. SQ is
the same kernel with megaraid_sas.host_tagset_enable=0 so that the card
advertises just a single HW queue. MQ-Patched is a kernel with this
patch applied.
You can see multiple hardware queues heavily hurt performance in
combination with BFQ. The patch restores the performance.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit b445547ec1.
Since both mq-deadline and BFQ completely ignore hctx they are passed to
their dispatch function and dispatch whatever request they deem fit
checking whether any request for a particular hctx is queued is just
pointless since we'll very likely get a request from a different hctx
anyway. In the following commit we'll deal with lock contention in these
IO schedulers in presence of multiple HW queues in a different way.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commits preserves I/O-dispatch plugging for a special symmetric
case that may suddenly turn into asymmetric: the case where only one
bfq_queue, say bfqq, is busy. In this case, not expiring bfqq does not
cause any harm to any other queues in terms of service guarantees. In
contrast, it avoids the following unlucky sequence of events: (1) bfqq
is expired, (2) a new queue with a lower weight than bfqq becomes busy
(or more queues), (3) the new queue is served until a new request
arrives for bfqq, (4) when bfqq is finally served, there are so many
requests of the new queue in the drive that the pending requests for
bfqq take a lot of time to be served. In particular, event (2) may
case even already dispatched requests of bfqq to be delayed, inside
the drive. So, to avoid this series of events, the scenario is
preventively declared as asymmetric also if bfqq is the only busy
queues. By doing so, I/O-dispatch plugging is performed for bfqq.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ tags some bfq_queues as interactive or soft_rt if it deems that
these bfq_queues contain the I/O of, respectively, interactive or soft
real-time applications. BFQ privileges both these special types of
bfq_queues over normal bfq_queues. To privilege a bfq_queue, BFQ
mainly raises the weight of the bfq_queue. In particular, soft_rt
bfq_queues get a higher weight than interactive bfq_queues.
A bfq_queue may turn from interactive to soft_rt. And this leads to a
tricky issue. Soft real-time applications usually start with an
I/O-bound, interactive phase, in which they load themselves into main
memory. BFQ correctly detects this phase, and keeps the bfq_queues
associated with the application in interactive mode for a
while. Problems arise when the I/O pattern of the application finally
switches to soft real-time. One of the conditions for a bfq_queue to
be deemed as soft_rt is that the bfq_queue does not consume too much
bandwidth. But the bfq_queues associated with a soft real-time
application consume as much bandwidth as they can in the loading phase
of the application. So, after the application becomes truly soft
real-time, a lot of time should pass before the average bandwidth
consumed by its bfq_queues finally drops to a value acceptable for
soft_rt bfq_queues. As a consequence, there might be a time gap during
which the application is not privileged at all, because its bfq_queues
are not interactive any longer, but cannot be deemed as soft_rt yet.
To avoid this problem, BFQ pretends that an interactive bfq_queue
consumes zero bandwidth, and allows an interactive bfq_queue to switch
to soft_rt. Yet, this fake zero-bandwidth consumption easily causes
the bfq_queue to often switch to soft_rt deceptively, during its
loading phase. As in soft_rt mode, the bfq_queue gets its bandwidth
correctly computed, and therefore soon switches back to
interactive. Then it switches again to soft_rt, and so on. These
spurious fluctuations usually cause losses of throughput, because they
deceive BFQ's mechanisms for boosting throughput (injection,
I/O-plugging avoidance, ...).
This commit addresses this issue as follows:
1) It does compute actual bandwidth consumption also for interactive
bfq_queues. This avoids the above false positives.
2) When a bfq_queue switches from interactive to normal mode, the
consumed bandwidth is reset (forgotten). This allows the
bfq_queue to enjoy soft_rt very quickly. In particular, two
alternatives are possible in this switch:
- the bfq_queue still has backlog, and therefore there is a budget
already scheduled to serve the bfq_queue; in this case, the
scheduling of the current budget of the bfq_queue is not
hindered, because only the scheduling of the next budget will
be affected by the weight drop. After that, if the bfq_queue is
actually in a soft_rt phase, and becomes empty during the
service of its current budget, which is the natural behavior of
a soft_rt bfq_queue, then the bfq_queue will be considered as
soft_rt when its next I/O arrives. If, in contrast, the
bfq_queue remains constantly non-empty, then its next budget
will be scheduled with a low weight, which is the natural
treatment for an I/O-bound (non soft_rt) bfq_queue.
- the bfq_queue is empty; in this case, the bfq_queue may be
considered unjustly soft_rt when its new I/O arrives. Yet
the problem is now much smaller than before, because it is
unlikely that more than one spurious fluctuation occurs.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ heuristics try to detect interactive I/O, and raise the weight of
the queues containing such an I/O. Yet, if also the user changes the
weight of a queue (i.e., the user changes the ioprio of the process
associated with that queue), then it is most likely better to prevent
BFQ heuristics from silently changing the same weight.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tests on slower machines showed current window to be way too
small. This commit increases it.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit c5089591c3ba ("block, bfq: detect wakers and
unconditionally inject their I/O"), when the in-service bfq_queue, say
Q, is temporarily empty, BFQ checks whether there are I/O requests to
inject (also) from the waker bfq_queue for Q. To this goal, the value
pointed by bfqq->waker_bfqq->next_rq must be controlled. However, the
current implementation mistakenly looks at bfqq->next_rq, which
instead points to the next request of the currently served queue.
This mistake evidently causes losses of throughput in scenarios with
waker bfq_queues.
This commit corrects this mistake.
Fixes: c5089591c3ba ("block, bfq: detect wakers and unconditionally inject their I/O")
Signed-off-by: Jia Cheng Hu <jia.jiachenghu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The value of the I/O plugging (idling) timeout is used also as the
think-time threshold to decide whether a process has a short think
time. In this respect, a good value of this timeout for rotational
drives is un the order of several ms. Yet, this is often too long a
time interval to be effective as a think-time threshold. This commit
mitigates this problem (by a lot, according to tests), by halving the
threshold.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that no fast path lookups in the partition table are left, there is
no point in micro-optimizing the data structure for it. Just use a bog
standard xarray.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is good reason to iterate backwards when deleting all partitions in
del_gendisk, just like we don't in blk_drop_partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to call kobject_uevent for the disk and all partitions, and
unexport the disk_part_iter_* helpers that are now only used in the core
block code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the reverse map from a sector to a partition for I/O accounting by
simply using ->bi_bdev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rework the I/O accounting for bio based drivers to use ->bi_bdev. This
means all drivers can now simply use bio_start_io_acct to start
accounting, and it will take partitions into account automatically. To
end I/O account either bio_end_io_acct can be used if the driver never
remaps I/O to a different device, or bio_end_io_acct_remapped if the
driver did remap the I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to reassign ->bi_bdev when remapping the
partition-relative block number to the device wide one, as all the
information required by the drivers comes from the gendisk anyway.
Keeping the original ->bi_bdev alive will allow to greatly simplify
the partition-away I/O accounting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge a few checks for whole devices vs partitions to streamline the
sanity checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the policy so that a BLKROSET on the whole device also affects
partitions. To quote Martin K. Petersen:
It's very common for database folks to twiddle the read-only state of
block devices and partitions. I know that our users will find it very
counter-intuitive that setting /dev/sda read-only won't prevent writes
to /dev/sda1.
The existing behavior is inconsistent in the sense that doing:
# blockdev --setro /dev/sda
# echo foo > /dev/sda1
permits writes. But:
# blockdev --setro /dev/sda
<something triggers revalidate>
# echo foo > /dev/sda1
doesn't.
And a subsequent:
# blockdev --setrw /dev/sda
# echo foo > /dev/sda1
doesn't work either since sda1's read-only policy has been inherited
from the whole-disk device.
You need to do:
# blockdev --rereadpt
after setting the whole-disk device rw to effectuate the same change on
the partitions, otherwise they are stuck being read-only indefinitely.
However, setting the read-only policy on a partition does *not* require
the revalidate step. As a matter of fact, doing the revalidate will blow
away the policy setting you just made.
So the user needs to take different actions depending on whether they
are trying to read-protect a whole-disk device or a partition. Despite
using the same ioctl. That is really confusing.
I have lost count how many times our customers have had data clobbered
because of ambiguity of the existing whole-disk device policy. The
current behavior violates the principle of least surprise by letting the
user think they write protected the whole disk when they actually
didn't.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 20bd1d026a ("scsi: sd: Keep disk read-only when re-reading
partition") addressed a long-standing problem with user read-only
policy being overridden as a result of a device-initiated revalidate.
The commit has since been reverted due to a regression that left some
USB devices read-only indefinitely.
To fix the underlying problems with revalidate we need to keep track
of hardware state and user policy separately.
The gendisk has been updated to reflect the current hardware state set
by the device driver. This is done to allow returning the device to
the hardware state once the user clears the BLKROSET flag.
The resulting semantics are as follows:
- If BLKROSET sets a given partition read-only, that partition will
remain read-only even if the underlying storage stack initiates a
revalidate. However, the BLKRRPART ioctl will cause the partition
table to be dropped and any user policy on partitions will be lost.
- If BLKROSET has not been set, both the whole disk device and any
partitions will reflect the current write-protect state of the
underlying device.
Based on a patch from Martin K. Petersen <martin.petersen@oracle.com>.
Reported-by: Oleksii Kurochko <olkuroch@cisco.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201221
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only a single caller can end up in bdev_read_only, so move the check
there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=CClj
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives
something like:
root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags
alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3
Add the decoding for that flag.
Fixes: 32bc15afed ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that bdgrab() is done on the 'block_device' instance before
referring to it for avoiding use-after-free.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+825f0f9657d4e528046e@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ computes number of tags it allows to be allocated for each request type
based on tag bitmap. However it uses 1 << bitmap.shift as number of
available tags which is wrong. 'shift' is just an internal bitmap value
containing logarithm of how many bits bitmap uses in each bitmap word.
Thus number of tags allowed for some request types can be far to low.
Use proper bitmap.depth which has the number of tags instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When initializing iocost for a queue, its rqos should be registered before
the blkcg policy is activated to allow policy data initiailization to lookup
the associated ioc. This unfortunately means that the rqos methods can be
called on bios before iocgs are attached to all existing blkgs.
While the race is theoretically possible on ioc_rqos_throttle(), it mostly
happened in ioc_rqos_merge() due to the difference in how they lookup ioc.
The former determines it from the passed in @rqos and then bails before
dereferencing iocg if the looked up ioc is disabled, which most likely is
the case if initialization is still in progress. The latter looked up ioc by
dereferencing the possibly NULL iocg making it a lot more prone to actually
triggering the bug.
* Make ioc_rqos_merge() use the same method as ioc_rqos_throttle() to look
up ioc for consistency.
* Make ioc_rqos_throttle() and ioc_rqos_merge() test for NULL iocg before
dereferencing it.
* Explain the danger of NULL iocgs in blk_iocost_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jonathan Lemon <bsd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big
core two fixes are for power management ("block: Do not accept any
requests while suspended" and "block: Fix a race in the runtime power
management code") which finally sorts out the resume problems we've
occasionally been having. To make the resume fix, there are seven
necessary precursors which effectively renames REQ_PREEMPT to REQ_PM,
so every "special" request in block is automatically a power
management exempt one. All of the non-PM preempt cases are removed
except for the one in the SCSI Parallel Interface (spi) domain
validation which is a genuine case where we have to run requests at
high priority to validate the bus so this becomes an autopm get/put
protected request.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX+98LyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYvLAP9K+HBT
Lrkt3VWc9gq6F36+QH/SeW8IyXGaj77ysFHXxwD/UambRjRK8IA24mvf9sWeLLj6
p8CqCHUkCXqP48IiymE=
=NHrx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
This was missed in 021a24460d. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes: 021a24460d
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update copyrights for files that have gotten some major rewrites lately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With force threaded interrupts enabled, raising softirq from an SMP
function call will always result in waking the ksoftirqd thread. This is
not optimal given that the thread runs at SCHED_OTHER priority.
Completing the request in hard IRQ-context on PREEMPT_RT (which enforces
the force threaded mode) is bad because the completion handler may
acquire sleeping locks which violate the locking context.
Disable request completing on a remote CPU in force threaded mode.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It will be helpful to trace the iocg's whole state, including active and
idle state. And we can easily expand the original iocost_iocg_activate
trace event to support a state trace class, including active and idle
state tracing.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's guaranteed that no request is in flight when a hctx is going
offline. This warning is only triggered when the wq's CPU is hot
plugged and the blk-mq is not synced up yet.
As this state is temporary and the request is still processed
correctly, better remove the warning as this is the fast path.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
