IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the zero hop addressing support by using mtr interface for CQE buffer,
so the hns driver can support addressing hopnum between 0 to 3 for CQE.
Link: https://lore.kernel.org/r/1586779091-51410-7-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the zero hop addressing support by using mtr interface for SRQ buffer,
so the hns driver can support addressing hopnum between 0 to 3 for SRQ.
Link: https://lore.kernel.org/r/1586779091-51410-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the zero hop addressing support by using new mtr interface for WQE
buffer and simple mtr invoking process, so WQE buffer can support hopnum
between 0 to 3.
Link: https://lore.kernel.org/r/1586779091-51410-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the new mtr interface to simple the hop 0 addressing and multihop
addressing process.
Link: https://lore.kernel.org/r/1586779091-51410-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the value of nbufs is 1, the buffer is in direct mode, which may cause
confusion. So optimizes current codes to make it easier to maintain and
understand.
Link: https://lore.kernel.org/r/1586779091-51410-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, WQE and EQE table have already used the mtr interface to config
and access memory by multi-hop addressing when hopnum is from 1 to 3. But
if hopnum is 0, each table need write its own but repetitive logic, and
many duplicate code exists in the mtr interfaces invoke process.
So wraps the public logic as 3 functions: hns_roce_mtr_create(),
hns_roce_mtr_destroy() and hns_roce_mtr_map() to support hopnum ranges from
0 to 3. In addition, makes the mtr interfaces easier to use.
Link: https://lore.kernel.org/r/1586779091-51410-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, before the qp is created, a page size needs to be calculated
for the base address table to store all base addresses in the mtr. As a
result, the parameter configuration of the mtr is complex. So integrate
the process of calculating the base table page size into the hem related
interface to simplify the process of using mtr.
Link: https://lore.kernel.org/r/1583839084-31579-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are serval global functions related to wqe buffer in the hns driver
and are called in different files. These symbols cannot directly represent
the namespace they belong to. So add prefix 'hns_roce_' to 3 wqe buffer
related global functions: get_recv_wqe(), get_send_wqe(), and
get_send_extend_sge().
Link: https://lore.kernel.org/r/1583839084-31579-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate qp buffer allocation related code into 3 functions:
alloc_qp_buf(), map_wqe_buf() and free_qp_buf().
Link: https://lore.kernel.org/r/1582526258-13825-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wrap the duplicate code in hip08 and hip06 qp destruction process as
hns_roce_qp_destroy() to simply the qp destroy flow.
Link: https://lore.kernel.org/r/1582526258-13825-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason. To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive
etc[1], flush needs to be performed from the driver.
The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.
Suggested Solution: we have proposed to defer the flushing of the QP in
the Errored state using the workqueue to get around with the limitation of
our hardware.
This patch specifically adds the calls to the flush handler from where
parts of the code like post_send/post_recv etc. when the QP state gets
into the errored mode.
[1] https://patchwork.kernel.org/patch/10534271/
Link: https://lore.kernel.org/r/1580983005-13899-3-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason. To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive etc
[1], flush needs to be performed from the driver.
The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.
Suggested Solution:
we have proposed to defer the flushing of the QP in the Errored state
using the workqueue to get around with the limitation of our hardware.
This patch adds the framework of the workqueue and the flush handler
function.
[1] https://patchwork.kernel.org/patch/10534271/
Link: https://lore.kernel.org/r/1580983005-13899-2-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The eqe has a private multi-hop addressing implementation, but there is
already a set of interfaces in the hns driver that can achieve this.
So, simplify the eqe buffer allocation process by using the mtr interface
and remove large amount of repeated logic.
Link: https://lore.kernel.org/r/20200126145835.11368-1-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some magic numbers are hard to understand, so replace them with macros or
add some comments for them.
Link: https://lore.kernel.org/r/20200126145504.9700-1-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pf capabilities are set by default for hip08 previously which should
depends on different types of hardware. So add new interfaces to get them
from firmware.
Link: https://lore.kernel.org/r/1578738761-3176-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and
max_srqs has the same effect with num_srqs. So remove them from this
structrue.
Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hardware is in resetting stage, we may can't poll back all the
expected work completions as the hardware won't generate cqe anymore.
This patch allows the driver to compose the expected wc instead of the
hardware during resetting stage. Once the hardware finished resetting, we
can poll cq from hardware again.
Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The values used to represent service type of RC and UD should be
interchanged according to design of hardware. And it's better to define
these types in enumeration than macros.
Link: https://lore.kernel.org/r/1578313276-29080-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hns_roce_init_eq_table() is an unused function that only retains its
declaration in driver.
Link: https://lore.kernel.org/r/1578313276-29080-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the wqe idx is calculated repeatly everywhere it is used. This
patch defines wqe_idx and calculated it only once, then just use it as
needed.
Fixes: 2d40788825ac ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, when cq event occurred, we first call our own callback
functions in the event process function, then call ib callback
functions. Actually, we can directly call ib callback functions.
Link: https://lore.kernel.org/r/1574044493-46984-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current names of functions are not proper, such as hns_roce_free_cq,
actually it means free cqc, thus we rename them. Furthermore, functions
used inside one file can be named without the prefix hns_roce_ which will
make the functions for verbs symbols more eye-catching.
Link: https://lore.kernel.org/r/1574044493-46984-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to package buf and mtt into hns_roce_cq_buf, which will
make code more complex, just delete this struct and move buf and mtt into
hns_roce_cq. Furthermore, we add size member for hns_roce_buf to avoid
repeatly calculating where needed it.
Link: https://lore.kernel.org/r/1574044493-46984-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some interfaces defined with unnecessary input parameters, such as "nent"
and "vector". This patch redefined these interfaces to make the code more
readable and simple.
Link: https://lore.kernel.org/r/1574044493-46984-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.
Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uar information is already recorded in priv_uar of hns_roce_dev, there
is no need to record it in hns_roce_cq again.
Link: https://lore.kernel.org/r/1572952082-6681-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Special QP have no differences with normal qp in data structure, so
definition of struct hns_roce_sqp should be removed and replaced by struct
hns_roce_qp.
Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HNS redefined available in bits.h define and didn't use it, we can safely
delete it.
Link: https://lore.kernel.org/r/20191023054239.31648-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sparse is whining about the u32 and __le32 mixed usage in the driver.
The roce_set_field() is used to __le32 data of hardware only.
If a variable is not delivered to the hardware, the __le32 type and
related operations are not required.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
hip08 can support up to 32768 wqes in one qp. currently if the wqe num
is larger than 16384, the driver will lead a calltrace as follows.
[21361.393725] Call trace:
[21361.398605] hns_roce_v2_modify_qp+0xbcc/0x1360 [hns_roce_hw_v2]
[21361.410627] hns_roce_modify_qp+0x1d8/0x2f8 [hns_roce]
[21361.420906] _ib_modify_qp+0x70/0x118
[21361.428222] ib_modify_qp+0x14/0x1c
[21361.435193] rt_ktest_modify_qp+0xb8/0x650 [rdma_test]
[21361.445472] exec_modify_qp_cmd+0x110/0x4d8 [rdma_test]
[21361.455924] rt_ktest_dispatch_cmd_3+0xa94/0x2edc [rdma_test]
[21361.467422] rt_ktest_dispatch_cmd_2+0x9c/0x108 [rdma_test]
[21361.478570] rt_ktest_dispatch_cmd+0x138/0x904 [rdma_test]
[21361.489545] rt_ktest_dev_write+0x328/0x4b0 [rdma_test]
[21361.499998] __vfs_write+0x38/0x15c
[21361.506966] vfs_write+0xa8/0x1a0
[21361.513586] ksys_write+0x50/0xb0
[21361.520206] sys_write+0xc/0x14
[21361.526479] el0_svc_naked+0x30/0x34
[21361.533622] Code: 1ac10841 d37d7c22 0b000021 d37df021 (f86268c0)
[21361.545815] ---[ end trace e2a1feb2c3d7f13c ]---
When the wqe num is larger than 16384, hns_roce_table_find will return an
invalid mtt, this will lead an kernel paging requet error if the driver try
to access it. It's the mtt design defect which can't support up to the max
wqe num of hip08.
This patch fixs it by replacing mtt with mtr for wqe.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, the code for getting umem and kmem buffers exist many files,
this patch adds a group interfaces to simplify the buffers getting flow.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, the MTT(memory translate table) design required a buffer
space must has the same hopnum, but the hip08 hw can support mixed
hopnum config in a buffer space.
This patch adds the MTR(memory translate region) design for supporting
mixed multihop.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ensure that CQ is allocated and freed by IB/core and not by drivers.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Like all other destroy commands, .destroy_cq() call is not supposed
to fail. In all flows, the attempt to return earlier caused to memory
leaks.
This patch converts .destroy_cq() to do not return any errors.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the user submits more than 32 work request to a srq queue
at a time, it needs to find the corresponding number of entries
in the bitmap in the idx queue. However, the original lookup
function named ffs only processes 32 bits of the array element,
When the number of srq wqe issued exceeds 32, the ffs will only
process the lower 32 bits of the elements, it will not be able
to get the correct wqe index for srq wqe.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch makes the code more readable by removing magic numbers.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds support of resource track for hip08 and take dumping cq
context state used for debugging as an example. More resources track
supports for hns driver will be added in future.
The output should be as follows.
$ rdma res show cq dev hnseth0 -d
dev hnseth0 cqe 1023 users 2 poll-ctx WORKQUEUE pid 0 comm [ib_core] drv_state 2 drv_ceq
n 0 drv_cqn 0 drv_hopnum 1 drv_pi 0 drv_ci 0 drv_coalesce 0 drv_period 0 drv_cnt 0
Signed-off-by: Tao Tian <tiantao6@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert SRQ allocation from drivers to be in the IB/core
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
