IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The checks only require information parsed from the RTM_NEWMDB netlink
message and do not rely on any state stored in the bridge driver.
Therefore, there is no need to perform the checks in the critical
section under the multicast lock.
Move the checks out of the critical section.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parsing of the netlink messages and the validity checks are now
performed in br_mdb_config_init() so we can remove br_mdb_parse().
This finally allows us to stop passing netlink attributes deep in the
MDB control path and only use the MDB configuration structure.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MDB group key (i.e., {source, destination, protocol, VID}) is
currently determined under the multicast lock from the netlink
attributes. Instead, use the group key from the MDB configuration
structure that was prepared before acquiring the lock.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As an intermediate step towards only using the new MDB configuration
structure, pass it further in the control path instead of passing
individual attributes.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MDB configuration structure (i.e., struct br_mdb_config) now
includes all the necessary information from the parsed RTM_{NEW,DEL}MDB
netlink messages, so use it.
This will later allow us to delete the calls to br_mdb_parse() from
br_mdb_add() and br_mdb_del().
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These checks are now redundant as they are performed by
br_mdb_config_init() while parsing the RTM_{NEW,DEL}MDB messages.
Remove them.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink attributes are currently passed deep in the MDB creation call
chain, making it difficult to add new attributes. In addition, some
validity checks are performed under the multicast lock although they can
be performed before it is ever acquired.
As a first step towards solving these issues, parse the RTM_{NEW,DEL}MDB
messages into a configuration structure, relieving other functions from
the need to handle raw netlink attributes.
Subsequent patches will convert the MDB code to use this configuration
structure.
This is consistent with how other rtnetlink objects are handled, such as
routes and nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/202212051918564721658@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFGBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmOQbKwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXftNB/dgOK6KE3NfdtYraJbbXsdWM+3Bs628
o+rtwvxXOpld63cJ62uIHzurcbYZP5fEwrg2+f/2ZAj9H8WASP+LlZeUkZ4im9Yx
sih+VQ6bmAIPX7m4pUKH/7r0Xs78P33FIkPV3jigOb/Lc0ALZOv1TvpZ1iqnlpTp
IcvmtLrGiLrrhgjr7Me7WG++P2eSEIRd/EVaSIU+F81Xp0H7NGsjkuySXYIfeV75
wZqVmpYf2SoGmE7aIqkFyprN8SddFnwN/enHRnnj8bCyIJi4c4/QvcxKAF8f1X7m
68YEsFPOSki1ljjooBqlwn8wbSEV0q46uH7Nx1CqXDDvD1L2gXVp9Zc=
=e9vo
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-12-07
The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer
deref found by syzbot in the AF_CAN protocol.
The next 2 patches are by Jiri Slaby and Max Staudt and add the
missing flush_work() before freeing the underlying memory in the slcan
and can327 driver.
The last patch is by Frank Jungclaus and target the esd_usb driver and
fixes the CAN error counters, allowing them to return to zero.
* tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
====================
Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
ieee802154-next 2022-12-05
Miquel continued his work towards full scanning support. For this,
we now allow the creation of dedicated coordinator interfaces
to allow a PAN coordinator to serve in the network and set
the needed address filters with the hardware.
On top of this we have the first part to allow scanning for available
15.4 networks. A new netlink scan group, within the existing nl802154
API, was added.
In addition Miquel fixed two issues that have been introduced in the former
patches to free an skb correctly and clarifying an expression in the stack.
From David Girault we got tracing support when registering new PANs.
* tag 'ieee802154-for-net-next-2022-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
mac802154: Trace the registration of new PANs
ieee802154: Advertize coordinators discovery
mac802154: Allow the creation of coordinator interfaces
mac802154: Clarify an expression
mac802154: Move an skb free within the rx path
====================
Link: https://lore.kernel.org/r/20221205131909.1871790-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FX5W
-----END PGP SIGNATURE-----
Merge "do not rely on ALLOW_ERROR_INJECTION for fmod_ret" into bpf-next
Merge commit 5b481acab4 ("bpf: do not rely on ALLOW_ERROR_INJECTION for fmod_ret")
from hid tree into bpf-next.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current way of expressing that a non-bpf kernel component is willing
to accept that bpf programs can be attached to it and that they can change
the return value is to abuse ALLOW_ERROR_INJECTION.
This is debated in the link below, and the result is that it is not a
reasonable thing to do.
Reuse the kfunc declaration structure to also tag the kernel functions
we want to be fmodret. This way we can control from any subsystem which
functions are being modified by bpf without touching the verifier.
Link: https://lore.kernel.org/all/20221121104403.1545f9b5@gandalf.local.home/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20221206145936.922196-2-benjamin.tissoires@redhat.com
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-12-05
An update from ieee802154 for your *net* tree:
Three small fixes this time around.
Ziyang Xuan fixed an error code for a timeout during initialization of the
cc2520 driver.
Hauke Mehrtens fixed a crash in the ca8210 driver SPI communication due
uninitialized SPI structures.
Wei Yongjun added INIT_LIST_HEAD ieee802154_if_add() to avoid a potential
null pointer dereference.
====================
Link: https://lore.kernel.org/r/20221205122515.1720539-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sending packets between nodes in netns, it calls tipc_lxc_xmit() for
peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv()
might be called, and it's pretty much like in tipc_rcv().
Currently the local 'node rw lock' is held during calling tipc_lxc_xmit()
to protect the peer_net not being freed by another thread. However, when
receiving these packets, tipc_node_add_conn() might be called where the
peer 'node rw lock' is acquired. Then a dead lock warning is triggered by
lockdep detector, although it is not a real dead lock:
WARNING: possible recursive locking detected
--------------------------------------------
conn_server/1086 is trying to acquire lock:
ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
but task is already holding lock:
ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_xmit+0x285/0xb30 [tipc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&n->lock#2);
lock(&n->lock#2);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by conn_server/1086:
#0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \
at: tipc_accept+0x9c0/0x10b0 [tipc]
#1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \
at: tipc_accept+0x363/0x10b0 [tipc]
#2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_xmit+0x285/0xb30 [tipc]
#3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \
at: tipc_sk_rcv+0x2da/0x1b40 [tipc]
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
__lock_acquire.cold.77+0x1f2/0x3d7
lock_acquire+0x1d2/0x610
_raw_write_lock_bh+0x38/0x80
tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
tipc_sk_finish_conn+0x21e/0x640 [tipc]
tipc_sk_filter_rcv+0x147b/0x3030 [tipc]
tipc_sk_rcv+0xbb4/0x1b40 [tipc]
tipc_lxc_xmit+0x225/0x26b [tipc]
tipc_node_xmit.cold.82+0x4a/0x102 [tipc]
__tipc_sendstream+0x879/0xff0 [tipc]
tipc_accept+0x966/0x10b0 [tipc]
do_accept+0x37d/0x590
This patch avoids this warning by not holding the 'node rw lock' before
calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock()
should be enough, as in cleanup_net() when freeing the netns, it calls
synchronize_rcu() before the free is continued.
Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes
sense to call it under rcu_read_lock(). Note that the right lock order
must be:
rcu_read_lock();
tipc_node_read_lock(n);
tipc_node_read_unlock(n);
tipc_lxc_xmit();
rcu_read_unlock();
instead of:
tipc_node_read_lock(n);
rcu_read_lock();
tipc_node_read_unlock(n);
tipc_lxc_xmit();
rcu_read_unlock();
and we have to call tipc_node_read_lock/unlock() twice in
tipc_node_xmit().
Fixes: f73b12812a ("tipc: improve throughput between nodes in netns")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Analogue to commit 8aa59e3559 ("can: af_can: fix NULL pointer
dereference in can_rx_register()") we need to check for a missing
initialization of ml_priv in the receive path of CAN frames.
Since commit 4e096a1886 ("net: introduce CAN specific pointer in the
struct net_device") the check for dev->type to be ARPHRD_CAN is not
sufficient anymore since bonding or tun netdevices claim to be CAN
devices but do not initialize ml_priv accordingly.
Fixes: 4e096a1886 ("net: introduce CAN specific pointer in the struct net_device")
Reported-by: syzbot+2d7f58292cb5b29eb5ad@syzkaller.appspotmail.com
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20221206201259.3028-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.
Consider the following example:
# ip address add dev dummy1 192.0.2.1/28
# ip address add dev dummy1 192.0.2.17/28
# ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
# ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:
# ip address del dev dummy1 192.0.2.17/28
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.
Add a test case that fails before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [FAIL]
Tests passed: 8
Tests failed: 1
And passes after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [ OK ]
Tests passed: 9
Tests failed: 0
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.
Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().
Add test cases that fail before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [FAIL]
TEST: Route in default VRF not removed [ OK ]
RTNETLINK answers: File exists
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [FAIL]
Tests passed: 6
Tests failed: 2
And pass after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Tests passed: 8
Tests failed: 0
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The memcpy() in ncsi_cmd_handler_oem deserializes nca->data into a
flexible array structure that overlapping with non-flex-array members
(mfr_id) intentionally. Since the mem_to_flex() API is not finished,
temporarily silence this warning, since it is a false positive, using
unsafe_memcpy().
Reported-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/netdev/CACPK8Xdfi=OJKP0x0D1w87fQeFZ4A2DP2qzGCRcuVbpU-9=4sQ@mail.gmail.com/
Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221202212418.never.837-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
socket dynamically created is not released when getting an unintended
address family type in rpc_sockname(), direct to out_release for calling
sock_release().
Fixes: 2e738fdce2 ("SUNRPC: Add API to acquire source address")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If rdma receive buffer allocate failed, should call rpcrdma_regbuf_free()
to free the send buffer, otherwise, the buffer data will be leaked.
Fixes: bb93a1ae2b ("xprtrdma: Allocate req's regbufs at xprt create time")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix the potential risk of OOB if skb_linearize() fails in
tipc_link_proto_rcv().
Fixes: 5cbb28a4bf ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.
IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f989d546a2 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change adds xfrm metadata helpers using the unstable kfunc call
interface for the TC-BPF hooks. This allows steering traffic towards
different IPsec connections based on logic implemented in bpf programs.
This object is built based on the availability of BTF debug info.
When setting the xfrm metadata, percpu metadata dsts are used in order
to avoid allocating a metadata dst per packet.
In order to guarantee safe module unload, the percpu dsts are allocated
on first use and never freed. The percpu pointer is stored in
net/core/filter.c so that it can be reused on module reload.
The metadata percpu dsts take ownership of the original skb dsts so
that they may be used as part of the xfrm transmission logic - e.g.
for MTU calculations.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-3-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add netlink based support for "ethtool -x <dev> [context x]"
command by implementing ETHTOOL_MSG_RSS_GET netlink message.
This is equivalent to functionality provided via ETHTOOL_GRSSH
in ioctl path. It sends RSS table, hash key and hash function
of an interface to user space.
This patch implements existing functionality available
in ioctl path and enables addition of new RSS context
based parameters in future.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WjuN
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20221201-b' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Increasing SACK size and moving away from softirq, parts 2 & 3
Here are the second and third parts of patches in the process of moving
rxrpc from doing a lot of its stuff in softirq context to doing it in an
I/O thread in process context and thereby making it easier to support a
larger SACK table.
The full description is in the description for the first part[1] which is
already in net-next.
The second part includes some cleanups, adds some testing and overhauls
some tracing:
(1) Remove declaration of rxrpc_kernel_call_is_complete() as the
definition is no longer present.
(2) Remove the knet() and kproto() macros in favour of using tracepoints.
(3) Remove handling of duplicate packets from recvmsg. The input side
isn't now going to insert overlapping/duplicate packets into the
recvmsg queue.
(4) Don't use the rxrpc_conn_parameters struct in the rxrpc_connection or
rxrpc_bundle structs - rather put the members in directly.
(5) Extract the abort code from a received abort packet right up front
rather than doing it in multiple places later.
(6) Use enums and symbol lists rather than __builtin_return_address() to
indicate where a tracepoint was triggered for local, peer, conn, call
and skbuff tracing.
(7) Add a refcount tracepoint for the rxrpc_bundle struct.
(8) Implement an in-kernel server for the AFS rxperf testing program to
talk to (enabled by a Kconfig option).
This is tagged as rxrpc-next-20221201-a.
The third part introduces the I/O thread and switches various bits over to
running there:
(1) Fix call timers and call and connection workqueues to not hold refs on
the rxrpc_call and rxrpc_connection structs to thereby avoid messy
cleanup when the last ref is put in softirq mode.
(2) Split input.c so that the call packet processing bits are separate
from the received packet distribution bits. Call packet processing
gets bumped over to the call event handler.
(3) Create a per-local endpoint I/O thread. Barring some tiny bits that
still get done in softirq context, all packet reception, processing
and transmission is done in this thread. That will allow a load of
locking to be removed.
(4) Perform packet processing and error processing from the I/O thread.
(5) Provide a mechanism to process call event notifications in the I/O
thread rather than queuing a work item for that call.
(6) Move data and ACK transmission into the I/O thread. ACKs can then be
transmitted at the point they're generated rather than getting
delegated from softirq context to some process context somewhere.
(7) Move call and local processor event handling into the I/O thread.
(8) Move cwnd degradation to after packets have been transmitted so that
they don't shorten the window too quickly.
A bunch of simplifications can then be done:
(1) The input_lock is no longer necessary as exclusion is achieved by
running the code in the I/O thread only.
(2) Don't need to use sk->sk_receive_queue.lock to guard socket state
changes as the socket mutex should suffice.
(3) Don't take spinlocks in RCU callback functions as they get run in
softirq context and thus need _bh annotations.
(4) RCU is then no longer needed for the peer's error_targets list.
(5) Simplify the skbuff handling in the receive path by dropping the ref
in the basic I/O thread loop and getting an extra ref as and when we
need to queue the packet for recvmsg or another context.
(6) Get the peer address earlier in the input process and pass it to the
users so that we only do it once.
This is tagged as rxrpc-next-20221201-b.
Changes:
========
ver #2)
- Added a patch to change four assertions into warnings in rxrpc_read()
and fixed a checker warning from a __user annotation that should have
been removed..
- Change a min() to min_t() in rxperf as PAGE_SIZE doesn't seem to match
type size_t on i386.
- Three error handling issues in rxrpc_new_incoming_call():
- If not DATA or not seq #1, should drop the packet, not abort.
- Fix a goto that went to the wrong place, dropping a non-held lock.
- Fix an rcu_read_lock that should've been an unlock.
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: kafs-testing+fedora36_64checkkafs-build-144@auristor.com
Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/166982725699.621383.2358362793992993374.stgit@warthog.procyon.org.uk/ # v1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Both in RX and TX, the traffic that performs IPsec packet offload
transformation is accounted by HW. It is needed to properly handle
hard limits that require to drop the packet.
It means that XFRM core needs to update internal counters with the one
that accounted by the HW, so new callbacks are introduced in this patch.
In case of soft or hard limit is occurred, the driver should call to
xfrm_state_check_expire() that will perform key rekeying exactly as
done by XFRM core.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Devices that implement IPsec packet offload mode should offload SA and
policies too. In RX path, it causes to the situation that HW will always
have higher priority over any SW policies.
It means that we don't need to perform any search of inexact policies
and/or priority checks if HW policy was discovered. In such situation,
the HW will catch the packets anyway and HW can still implement inexact
lookups.
In case specific policy is not found, we will continue with packet lookup and
check for existence of HW policies in inexact list.
HW policies are added to the head of SPD to ensure fast lookup, as XFRM
iterates over all policies in the loop.
The same solution of adding HW SAs at the begging of the list is applied
to SA database too. However, we don't need to change lookups as they are
sorted by insertion order and not priority.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In IPsec packet mode, the device is going to encrypt and encapsulate
packets that are associated with offloaded policy. After successful
policy lookup to indicate if packets should be offloaded or not,
the stack forwards packets to the device to do the magic.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Extend netlink interface to add and delete XFRM policy from the device.
This functionality is a first step to implement packet IPsec offload solution.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Allow users to configure xfrm states with packet offload mode.
The packet mode must be requested both for policy and state, and
such requires us to do not implement fallback.
We explicitly return an error if requested packet mode can't
be configured.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the next patches, the xfrm core code will be extended to support
new type of offload - packet offload. In that mode, both policy and state
should be specially configured in order to perform whole offloaded data
path.
Full offload takes care of encryption, decryption, encapsulation and
other operations with headers.
As this mode is new for XFRM policy flow, we can "start fresh" with flag
bits and release first and second bit for future use.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Kernel fault injection test reports null-ptr-deref as follows:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114
Call Trace:
<TASK>
raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87
call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944
unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982
unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879
register_netdevice+0x9a8/0xb90 net/core/dev.c:10083
ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659
ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229
mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316
ieee802154_if_add() allocates wpan_dev as netdev's private data, but not
init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage
the list when device register/unregister, and may lead to null-ptr-deref.
Use INIT_LIST_HEAD() on it to initialize it correctly.
Fixes: fcf39e6e88 ("ieee802154: add wpan_dev_list")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221130091705.1831140-1-weiyongjun@huaweicloud.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The bpf_ct_set_nat_info() kfunc is defined in the nf_nat.ko module, and
takes as a parameter the nf_conn___init struct, which is allocated through
the bpf_xdp_ct_alloc() helper defined in the nf_conntrack.ko module.
However, because kernel modules can't deduplicate BTF types between each
other, and the nf_conn___init struct is not referenced anywhere in vmlinux
BTF, this leads to two distinct BTF IDs for the same type (one in each
module). This confuses the verifier, as described here:
https://lore.kernel.org/all/87leoh372s.fsf@toke.dk/
As a workaround, add an explicit BTF_TYPE_EMIT for the type in
net/filter.c, so the type definition gets included in vmlinux BTF. This
way, both modules can refer to the same type ID (as they both build on top
of vmlinux BTF), and the verifier is no longer confused.
v2:
- Use BTF_TYPE_EMIT (which is a statement so it has to be inside a function
definition; use xdp_func_proto() for this, since this is mostly
xdp-related).
Fixes: 820dc0523e ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221201123939.696558-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a helper for drivers wanting to set SW IRQ coalescing
by default. The related sysfs attributes can be used to
override the default values.
Follow Jakub's suggestion and put this functionality into
net core so that drivers wanting to use software interrupt
coalescing per default don't have to open-code it.
Note that this function needs to be called before the
netdevice is registered.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return NULL if we got unexpected value from skb_trim_rcsum() in
sja1110_rcv_inband_control_extension()
Fixes: 4913b8ebf8 ("net: dsa: add support for the SJA1110 native tagging protocol")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-3-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return NULL if we got unexpected value from skb_trim_rcsum()
in hellcreek_rcv()
Fixes: 01ef09caad ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20221201140032.26746-2-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return NULL if we got unexpected value from skb_trim_rcsum()
in ksz_common_rcv()
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bafe9ba7d9 ("net: dsa: ksz: Factor out common tag code")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kfree_rcu(1-arg) should be avoided as much as possible,
since this is only possible from sleepable contexts,
and incurr extra rcu barriers.
I wish the 1-arg variant of kfree_rcu() would
get a distinct name, like kfree_rcu_slow()
to avoid it being abused.
Fixes: 459837b522 ("net/tcp: Disable TCP-MD5 static key on tcp_md5sig_info destruction")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20221202052847.2623997-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.
Major changes:
ath10k
* store WLAN firmware version in SMEM image table
mt76
* mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
* mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
* mt7915: add ack signal support
* mt7915: enable coredump support
* mt7921: remain_on_channel support
* mt7921: channel context support
iwlwifi
* enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
* 320 MHz channels support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmOKcMARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv3cgf+KjlbxtCZvEIfK+jsd2/VK635ucUdC1d5
QZB5SCHyVCqTMEsBBw0WCmFdfnqQRQUE9Qe5s0hlwhyrjLP4FQ6/jGTarFvRV43E
xO8jJd7e4mnVVoQySeKIRfvtYPFKT5GpaDVs4ytfdSs+KYoCE7akMBcvHVO8Fr2M
MepdqyoJakhRybFUJZMts8W8IsBikv9hdnb2Mr/E32JFLeP6ggs9tKCZKBbpxyXk
BzfYkDMXffFl95prlmy4rXP223FjvgUuRNWaatseR7S6A/Ik9Xk3B1qv3mtocPZF
LiTlFtmn3qkgyX5bfm6NRe/2FqgRUYfIrN0XtVw6Sy8WUe1GCf3opA==
=pkqE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.2
Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.
Major changes:
ath10k
- store WLAN firmware version in SMEM image table
mt76
- mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
- mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
- mt7915: add ack signal support
- mt7915: enable coredump support
- mt7921: remain_on_channel support
- mt7921: channel context support
iwlwifi
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
* tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits)
wifi: ath10k: fix QCOM_SMEM dependency
wifi: mt76: mt7921e: add pci .shutdown() support
wifi: mt76: mt7915: mmio: fix naming convention
wifi: mt76: mt7996: add support to configure spatial reuse parameter set
wifi: mt76: mt7996: enable ack signal support
wifi: mt76: mt7996: enable use_cts_prot support
wifi: mt76: mt7915: rely on band_idx of mt76_phy
wifi: mt76: mt7915: enable per bandwidth power limit support
wifi: mt76: mt7915: introduce mt7915_get_power_bound()
mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()
wifi: mt76: do not send firmware FW_FEATURE_NON_DL region
wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices
wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power
wifi: mt76: mt7915: fix band_idx usage
wifi: mt76: mt7915: enable .sta_set_txpwr support
wifi: mt76: mt7915: add basedband Txpower info into debugfs
wifi: mt76: mt7915: add support to configure spatial reuse parameter set
wifi: mt76: mt7915: add missing MODULE_PARM_DESC
...
====================
Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bt_init() calls bt_leds_init() to register led, but if it fails later,
bt_leds_cleanup() is not called to unregister it.
This can cause panic if the argument "bluetooth-power" in text is freed
and then another led_trigger_register() tries to access it:
BUG: unable to handle page fault for address: ffffffffc06d3bc0
RIP: 0010:strcmp+0xc/0x30
Call Trace:
<TASK>
led_trigger_register+0x10d/0x4f0
led_trigger_register_simple+0x7d/0x100
bt_init+0x39/0xf7 [bluetooth]
do_one_initcall+0xd0/0x4e0
Fixes: e64c97b53b ("Bluetooth: Add combined LED trigger for controller power")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Handling of Read Local Supported Codecs was broken during the
HCI serialization design change patches.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On kernel 6.1-rcX, I have been getting the following dmesg error message
on every boot, resume from suspend and rfkill unblock of the Bluetooth
device:
Bluetooth: hci0: HCI_REQ-0xfcf0
After some investigation, it turned out to be caused by
commit dd50a864ff ("Bluetooth: Delete unreferenced hci_request code")
which modified hci_req_add() in net/bluetooth/hci_request.c to always
print an error message when it is executed. In my case, the function was
executed by msft_set_filter_enable() in net/bluetooth/msft.c, which
provides support for Microsoft vendor opcodes.
As explained by Brian Gix, "the error gets logged because it is using a
deprecated (but still working) mechanism to issue HCI opcodes" [1]. So
this is just a debugging tool to show that a deprecated function is
executed. As such, it should not be included in the mainline kernel.
See for example
commit 771c035372 ("deprecate the '__deprecated' attribute warnings entirely and for good")
Additionally, this error message is cryptic and the user is not able to
do anything about it.
[1]
Link: https://lore.kernel.org/lkml/beb8dcdc3aee4c5c833aa382f35995f17e7961a1.camel@intel.com/
Fixes: dd50a864ff ("Bluetooth: Delete unreferenced hci_request code")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Brian Gix <brian.gix@intel.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A patch series by a Qualcomm engineer essentially removed my
quirk/workaround because they thought it was unnecessary.
It wasn't, and it broke everything again:
https://patchwork.kernel.org/project/netdevbpf/list/?series=661703&archive=both&state=*
He argues that the quirk is not necessary because the code should check
if the dongle says if it's supported or not. The problem is that for
these Chinese CSR clones they say that it would work:
= New Index: 00:00:00:00:00:00 (Primary,USB,hci0)
= Open Index: 00:00:00:00:00:00
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
> [hci0] 11.276039
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Bluetooth 5.0 (0x09) - Revision 2064 (0x0810)
LMP version: Bluetooth 5.0 (0x09) - Subversion 8978 (0x2312)
Manufacturer: Cambridge Silicon Radio (10)
...
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 68
> [hci0] 11.668030
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 163 entries
...
Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
...
...
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
= Close Index: 00:1A:7D:DA:71:XX
So bring it back wholesale.
Fixes: 63b1a7dd38 ("Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING")
Fixes: e168f69008 ("Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR")
Fixes: 766ae2422b ("Bluetooth: hci_sync: Check LMP feature bit instead of quirk")
Cc: stable@vger.kernel.org
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some devlink instances may contain thousands of ports. Storing them in
linked list and looking them up is not scalable. Convert the linked list
into xarray.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
self_node_db is a list_head with one entry of struct hsr_node. The
purpose is to hold the two MAC addresses of the node itself.
It is convenient to recycle the structure. However having a list_head
and fetching always the first entry is not really optimal.
Created a new data strucure contaning the two MAC addresses named
hsr_self_node. Access that structure like an RCU protected pointer so
it can be replaced on the fly without blocking the reader.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hsr_register_frame_out() compares new sequence_nr vs the old one
recorded in hsr_node::seq_out and if the new sequence_nr is higher then
it will be written to hsr_node::seq_out as the new value.
This operation isn't locked so it is possible that two frames with the
same sequence number arrive (via the two slave devices) and are fed to
hsr_register_frame_out() at the same time. Both will pass the check and
update the sequence counter later to the same value. As a result the
content of the same packet is fed into the stack twice.
This was noticed by running ping and observing DUP being reported from
time to time.
Instead of using the hsr_priv::seqnr_lock for the whole receive path (as
it is for sending in the master node) add an additional lock that is only
used for sequence number checks and updates.
Add a per-node lock that is used during sequence number reads and
updates.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sending frames via the hsr (master) device requires a sequence number
which is tracked in hsr_priv::sequence_nr and protected by
hsr_priv::seqnr_lock. Each time a new frame is sent, it will obtain a
new id and then send it via the slave devices.
Each time a packet is sent (via hsr_forward_do()) the sequence number is
checked via hsr_register_frame_out() to ensure that a frame is not
handled twice. This make sense for the receiving side to ensure that the
frame is not injected into the stack twice after it has been received
from both slave ports.
There is no locking to cover the sending path which means the following
scenario is possible:
CPU0 CPU1
hsr_dev_xmit(skb1) hsr_dev_xmit(skb2)
fill_frame_info() fill_frame_info()
hsr_fill_frame_info() hsr_fill_frame_info()
handle_std_frame() handle_std_frame()
skb1's sequence_nr = 1
skb2's sequence_nr = 2
hsr_forward_do() hsr_forward_do()
hsr_register_frame_out(, 2) // okay, send)
hsr_register_frame_out(, 1) // stop, lower seq duplicate
Both skbs (or their struct hsr_frame_info) received an unique id.
However since skb2 was sent before skb1, the higher sequence number was
recorded in hsr_register_frame_out() and the late arriving skb1 was
dropped and never sent.
This scenario has been observed in a three node HSR setup, with node1 +
node2 having ping and iperf running in parallel. From time to time ping
reported a missing packet. Based on tracing that missing ping packet did
not leave the system.
It might be possible (didn't check) to drop the sequence number check on
the sending side. But if the higher sequence number leaves on wire
before the lower does and the destination receives them in that order
and it will drop the packet with the lower sequence number and never
inject into the stack.
Therefore it seems the only way is to lock the whole path from obtaining
the sequence number and sending via dev_queue_xmit() and assuming the
packets leave on wire in the same order (and don't get reordered by the
NIC).
Cover the whole path for the master interface from obtaining the ID
until after it has been forwarded via hsr_forward_skb() to ensure the
skbs are sent to the NIC in the order of the assigned sequence numbers.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hsr device is a software device. Its
net_device_ops::ndo_start_xmit() routine will process the packet and
then pass the resulting skb to dev_queue_xmit().
During processing, hsr acquires a lock with spin_lock_bh()
(hsr_add_node()) which needs to be promoted to the _irq() suffix in
order to avoid a potential deadlock.
Then there are the warnings in dev_queue_xmit() (due to
local_bh_disable() with disabled interrupts) left.
Instead trying to address those (there is qdisc and…) for netpoll sake,
just disable netpoll on hsr.
Disable netpoll on hsr and replace the _irqsave() locking with _bh().
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the hashed-MAC optimisation one problem become visible:
hsr_handle_sup_frame() walks over the list of available nodes and merges
two node entries into one if based on the information in the supervision
both MAC addresses belong to one node. The list-walk happens on a RCU
protected list and delete operation happens under a lock.
If the supervision arrives on both slave interfaces at the same time
then this delete operation can occur simultaneously on two CPUs. The
result is the first-CPU deletes the from the list and the second CPUs
BUGs while attempting to dereference a poisoned list-entry. This happens
more likely with the optimisation because a new node for the mac_B entry
is created once a packet has been received and removed (merged) once the
supervision frame has been received.
Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field
which is set to true after the removal and checked before the removal.
Fixes: f266a683a4 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hsr_forward_skb() a skb and keeps information in an on-stack
hsr_frame_info. hsr_get_node() assigns hsr_frame_info::node_src which is
from a RCU list. This pointer is used later in hsr_forward_do().
I don't see a reason why this pointer can't vanish midway since there is
no guarantee that hsr_forward_skb() is invoked from an RCU read section.
Use rcu_read_lock() to protect hsr_frame_info::node_src from its
assignment until it is no longer used.
Fixes: f266a683a4 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hlist optimisation (which not only uses hlist_head instead of
list_head but also splits hsr_priv::node_db into an array of 256 slots)
does not consider the "node merge":
Upon starting the hsr network (with three nodes) a packet that is
sent from node1 to node3 will also be sent from node1 to node2 and then
forwarded to node3.
As a result node3 will receive 2 packets because it is not able
to filter out the duplicate. Each packet received will create a new
struct hsr_node with macaddress_A only set the MAC address it received
from (the two MAC addesses from node1).
At some point (early in the process) two supervision frames will be
received from node1. They will be processed by hsr_handle_sup_frame()
and one frame will leave early ("Node has already been merged") and does
nothing. The other frame will be merged as portB and have its MAC
address written to macaddress_B and the hsr_node (that was created for
it as macaddress_A) will be removed.
From now on HSR is able to identify a duplicate because both packets
sent from one node will result in the same struct hsr_node because
hsr_get_node() will find the MAC address either on macaddress_A or
macaddress_B.
Things get tricky with the optimisation: If sender's MAC address is
saved as macaddress_A then the lookup will work as usual. If the MAC
address has been merged into macaddress_B of another hsr_node then the
lookup won't work because it is likely that the data structure is in
another bucket. This results in creating a new struct hsr_node and not
recognising a possible duplicate.
A way around it would be to add another hsr_node::mac_list_B and attach
it to the other bucket to ensure that this hsr_node will be looked up
either via macaddress_A _or_ macaddress_B.
I however prefer to revert it because it sounds like an academic problem
rather than real life workload plus it adds complexity. I'm not an HSR
expert with what is usual size of a network but I would guess 40 to 60
nodes. With 10.000 nodes and assuming 60us for pass-through (from node
to node) then it would take almost 600ms for a packet to almost wrap
around which sounds a lot.
Revert the hash MAC addresses optimisation.
Fixes: 4acc45db71 ("net: hsr: use hlist_head instead of list_head for mac addresses")
Cc: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 9ed7bfc795 ("sctp: fix memory leak in
sctp_stream_outq_migrate()"), sctp_sched_set_sched() is the only
place calling sched->free(), and it can actually be replaced by
sched->free_sid() on each stream, and yet there's already a loop
to traverse all streams in sctp_sched_set_sched().
This patch adds a function sctp_sched_free_sched() where it calls
sched->free_sid() for each stream to replace sched->free() calls
in sctp_sched_set_sched() and then deletes the unused free member
from struct sctp_sched_ops.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/e10aac150aca2686cb0bd0570299ec716da5a5c0.1669849471.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new MPTCP netlink event types for PM listening
socket create and close, named MPTCP_EVENT_LISTENER_CREATED and
MPTCP_EVENT_LISTENER_CLOSED.
Add a new function mptcp_event_pm_listener() to push the new events
with family, port and addr to userspace.
Invoke mptcp_event_pm_listener() with MPTCP_EVENT_LISTENER_CREATED in
mptcp_listen() and mptcp_pm_nl_create_listen_socket(), invoke it with
MPTCP_EVENT_LISTENER_CLOSED in __mptcp_close_ssk().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert BUG_ON() to WARN_ON_ONCE() and warn as well for unlikely
static key int overflow error-path.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the kernel was short on (atomic) memory and failed to allocate it -
don't proceed to creation of request socket. Otherwise the socket would
be unsigned and userspace likely doesn't expect that the TCP is not
MD5-signed anymore.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To do that, separate two scenarios:
- where it's the first MD5 key on the system, which means that enabling
of the static key may need to sleep;
- copying of an existing key from a listening socket to the request
socket upon receiving a signed TCP segment, where static key was
already enabled (when the key was added to the listening socket).
Now the life-time of the static branch for TCP-MD5 is until:
- last tcp_md5sig_info is destroyed
- last socket in time-wait state with MD5 key is closed.
Which means that after all sockets with TCP-MD5 keys are gone, the
system gets back the performance of disabled md5-key static branch.
While at here, provide static_key_fast_inc() helper that does ref
counter increment in atomic fashion (without grabbing cpus_read_lock()
on CONFIG_JUMP_LABEL=y). This is needed to add a new user for
a static_key when the caller controls the lifetime of another user.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to allocate tcp_md5sig_info, that will help later to
do/allocate things when info allocated, once per socket.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ieee80211_drop_unencrypted is called from ieee80211_rx_h_mesh_fwding and
ieee80211_frame_allowed.
Since ieee80211_rx_h_mesh_fwding can forward packets for other mesh nodes
and is called earlier, it needs to check the decryptions status and if the
packet is using the control protocol on its own, instead of deferring to
the later call from ieee80211_frame_allowed.
Because of that, ieee80211_drop_unencrypted has a mesh specific check
that skips over the mesh header in order to check the payload protocol.
This code is invalid when called from ieee80211_frame_allowed, since that
happens after the 802.11->802.3 conversion.
Fix this by moving the mesh specific check directly into
ieee80211_rx_h_mesh_fwding.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221201135730.19723-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used to selectively disable feature flags for checksum offload,
scatter/gather or GSO by changing vif->netdev_features.
Removing features from vif->netdev_features does not affect the netdev
features themselves, but instead fixes up skbs in the tx path so that the
offloads are not needed in the driver.
Aside from making it easier to deal with vif type based hardware limitations,
this also makes it possible to optimize performance on hardware without native
GSO support by declaring GSO support in hw->netdev_features and removing it
from vif->netdev_features. This allows mac80211 to handle GSO segmentation
after the sta lookup, but before itxq enqueue, thus reducing the number of
unnecessary sta lookups, as well as some other per-packet processing.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221010094338.78070-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Updates to the TIM information element to match changes made in the
IEEE Std 802.11ah-2020.
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Link: https://lore.kernel.org/r/20221106221602.25714-1-gilad.itzkovitch@morsemicro.com
[use skb_put_data/skb_put_u8]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's not valid to have the multiple BSSID element in the
association response (per 802.11 REVme D1.0), so don't
try to parse it there, but only in the fallback beacon
elements if needed.
The other case that was parsing association requests was
already changed in a previous commit.
Change-Id: I659d2ef1253e079cc71c46a017044e116e31c024
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to open-code container_of() when we have
bss_from_pub(). Use it.
Change-Id: I074723717909ba211a40e6499f0c36df0e2ba4be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The call to ieee80211_do_stop() right after will also do
synchronize_rcu() to ensure the SDATA_STATE_RUNNING bit
is cleared, so we don't need to synchronize_net() here.
Change-Id: Id9f9ffcf195002013e5d9fde288877d219780864
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_get_txq() can only be called with vif != NULL.
Remove not needed NULL test in function.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20221107161328.2883-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In regulatory_init_db(), when it's going to return a error, reg_pdev
should be unregistered. When load_builtin_regdb_keys() fails it doesn't
do it and makes cfg80211 can't be reload with report:
sysfs: cannot create duplicate filename '/devices/platform/regulatory.0'
...
<TASK>
dump_stack_lvl+0x79/0x9b
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x22d/0x290
kobject_add_internal+0x247/0x800
kobject_add+0x135/0x1b0
device_add+0x389/0x1be0
platform_device_add+0x28f/0x790
platform_device_register_full+0x376/0x4b0
regulatory_init+0x9a/0x4b2 [cfg80211]
cfg80211_init+0x84/0x113 [cfg80211]
...
Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the "channel->freq_offset" comparison is omitted in cmp_bss(),
BSS with different kHz units cannot be distinguished in the S1G Band.
So "freq_offset" should also be included in the comparison.
Signed-off-by: JUN-KYU SHIN <jk.shin@newratek.com>
Link: https://lore.kernel.org/r/20221111023301.6395-1-jk.shin@newratek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_lookup_key, the variable named `local` is unused if
compiled without lockdep, getting this warning:
net/mac80211/cfg.c: In function ‘ieee80211_lookup_key’:
net/mac80211/cfg.c:542:26: error: unused variable ‘local’ [-Werror=unused-variable]
struct ieee80211_local *local = sdata->local;
^~~~~
Fix it with __maybe_unused.
Fixes: 8cbf0c2ab6 ("wifi: mac80211: refactor some key code")
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/20221111153622.29016-1-ihuguet@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For ACKs generated inside the I/O thread, transmit the ACK at the point of
generation. Where the ACK is generated outside of the I/O thread, it's
offloaded to the I/O thread to transmit it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Fold __rxrpc_unuse_local() into rxrpc_unuse_local() as the latter is now
the only user of the former.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When we've gone for >1RTT without transmitting a packet, we should reduce
the ssthresh and cut the cwnd by half (as suggested in RFC2861 sec 3.1).
However, we may receive ACK packets in a batch and the first of these may
cut the cwnd, preventing further transmission, and each subsequent one cuts
the cwnd yet further, reducing it to the floor and killing performance.
Fix this by moving the cwnd reset to after doing the transmission and
resetting the base time such that we don't cut the cwnd by half again for
at least another RTT.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a tracepoint to log when a cwnd reset occurs due to lack of
transmission on a call.
Add stat counters to count transmission underflows (ie. when we have tx
window space, but sendmsg doesn't manage to keep up), cwnd resets and
transmission failures.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
None of the spinlocks in rxrpc need a _bh annotation now as the RCU
callback routines no longer take spinlocks and the bulk of the packet
wrangling code is now run in the I/O thread, not softirq context.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move the functions from the call->processor and local->processor work items
into the domain of the I/O thread.
The call event processor, now called from the I/O thread, then takes over
the job of cranking the call state machine, processing incoming packets and
transmitting DATA, ACK and ABORT packets. In a future patch,
rxrpc_send_ACK() will transmit the ACK on the spot rather than queuing it
for later transmission.
The call event processor becomes purely received-skb driven. It only
transmits things in response to events. We use "pokes" to queue a dummy
skb to make it do things like start/resume transmitting data. Timer expiry
also results in pokes.
The connection event processor, becomes similar, though crypto events, such
as dealing with CHALLENGE and RESPONSE packets is offloaded to a work item
to avoid doing crypto in the I/O thread.
The local event processor is removed and VERSION response packets are
generated directly from the packet parser. Similarly, ABORTs generated in
response to protocol errors will be transmitted immediately rather than
being pushed onto a queue for later transmission.
Changes:
========
ver #2)
- Fix a couple of introduced lock context imbalances.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Extract the peer address from an incoming packet earlier, at the beginning
of rxrpc_input_packet() and thence pass a pointer to it to various
functions that use it as part of the lookup rather than doing it on several
separate paths.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Shrink the region of rxrpc_input_packet() that is covered by the RCU read
lock so that it only covers the connection and call lookup. This means
that the bits now outside of that can call sleepable functions such as
kmalloc and sendmsg.
Also take a ref on the conn or call we're going to use before we drop the
RCU read lock.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
A received skbuff needs a ref when it gets put on a call data queue or conn
packet queue, and rxrpc_input_packet() and co. jump through a lot of hoops
to avoid double-dropping the skbuff ref so that we can avoid getting a ref
when we queue the packet.
Change this so that the skbuff ref is unconditionally dropped by the caller
of rxrpc_input_packet(). An additional ref is then taken on the packet if
it is pushed onto a queue.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the RCU requirements from the peer's list of error targets so that
the error distributor can call sleeping functions.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move DATA transmission into the call processor work item. In a future
patch, this will be called from the I/O thread rather than being itsown
work item.
This will allow DATA transmission to be driven directly by incoming ACKs,
pokes and timers as those are processed.
The Tx queue is also split: The queue of packets prepared by sendmsg is now
places in call->tx_sendmsg and the packet dispatcher decants the packets
into call->tx_buffer as space becomes available in the transmission
window. This allows sendmsg to run ahead of the available space to try and
prevent an underflow in transmission.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Copy client call parameters into rxrpc_call earlier so that that can be
used to convey them to the connection code - which can then be offloaded to
the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Provide a means by which an event notification can be sent to a call such
that the I/O thread can process it rather than it being done in a separate
workqueue. This will allow a lot of locking to be removed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Don't use sk->sk_receive_queue.lock to guard socket state changes as the
socket mutex is sufficient.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove call->input_lock as it was only necessary to serialise access to the
state stored in the rxrpc_call struct by simultaneous softirq handlers
presenting received packets. They now dump the packets in a queue and a
single process-context handler now processes them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move the processing of error packets into the local endpoint I/O thread,
leaving the handover from UDP to merely transfer them into the local
endpoint queue.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Split the packet input handler to make the softirq side just dump the
received packet into the local endpoint receive queue and then call the
remainder of the input function from the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Create a per-local receive queue to which, in a future patch, all incoming
packets will be directed and an I/O thread that will process those packets
and perform all transmission of packets.
Destruction of the local endpoint is also moved from the local processor
work item (which will be absorbed) to the thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Split the code that handles packet reception in softirq mode as a prelude
to moving all the packet processing beyond routing to the appropriate call
and setting up of a new call out into process context.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Currently, rxrpc gives the connection's work item a ref on the connection
when it queues it - and this is called from the timer expiration function.
The problem comes when queue_work() fails (ie. the work item is already
queued): the timer routine must put the ref - but this may cause the
cleanup code to run.
This has the unfortunate effect that the cleanup code may then be run in
softirq context - which means that any spinlocks it might need to touch
have to be guarded to disable softirqs (ie. they need a "_bh" suffix).
(1) Don't give a ref to the work item.
(2) Simplify handling of service connections by adding a separate active
count so that the refcount isn't also used for this.
(3) Connection destruction for both client and service connections can
then be cleaned up by putting rxrpc_put_connection() out of line and
making a tidy progression through the destruction code (offloaded to a
workqueue if put from softirq or processor function context). The RCU
part of the cleanup then only deals with the freeing at the end.
(4) Make rxrpc_queue_conn() return immediately if it sees the active count
is -1 rather then queuing the connection.
(5) Make sure that the cleanup routine waits for the work item to
complete.
(6) Stash the rxrpc_net pointer in the conn struct so that the rcu free
routine can use it, even if the local endpoint has been freed.
Unfortunately, neither the timer nor the work item can simply get around
the problem by just using refcount_inc_not_zero() as the waits would still
have to be done, and there would still be the possibility of having to put
the ref in the expiration function.
Note the connection work item is mostly going to go away with the main
event work being transferred to the I/O thread, so the wait in (6) will
become obsolete.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Currently, rxrpc gives the call timer a ref on the call when it starts it
and this is passed along to the workqueue by the timer expiration function.
The problem comes when queue_work() fails (ie. the work item is already
queued): the timer routine must put the ref - but this may cause the
cleanup code to run.
This has the unfortunate effect that the cleanup code may then be run in
softirq context - which means that any spinlocks it might need to touch
have to be guarded to disable softirqs (ie. they need a "_bh" suffix).
Fix this by:
(1) Don't give a ref to the timer.
(2) Making the expiration function not do anything if the refcount is 0.
Note that this is more of an optimisation.
(3) Make sure that the cleanup routine waits for timer to complete.
However, this has a consequence that timer cannot give a ref to the work
item. Therefore the following fixes are also necessary:
(4) Don't give a ref to the work item.
(5) Make the work item return asap if it sees the ref count is 0.
(6) Make sure that the cleanup routine waits for the work item to
complete.
Unfortunately, neither the timer nor the work item can simply get around
the problem by just using refcount_inc_not_zero() as the waits would still
have to be done, and there would still be the possibility of having to put
the ref in the expiration function.
Note the call work item is going to go away with the work being transferred
to the I/O thread, so the wait in (6) will become obsolete.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the sk_buff tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a tracepoint for the rxrpc_bundle refcounting.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_call tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_conn tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_peer tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_local tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Extract the code from a received rx ABORT packet much earlier and in a
single place and harmonise the responses to malformed ABORT packets.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the rxrpc_conn_parameters struct from the rxrpc_connection and
rxrpc_bundle structs and emplace the members directly. These are going to
get filled in from the rxrpc_call struct in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the _net() and knet() debugging macros in favour of tracepoints.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the kproto() and _proto() debugging macros in preference to using
tracepoints for this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
We should not now see duplicate packets in the recvmsg_queue. At one
point, jumbo packets that overlapped with already queued data would be
added to the queue and dealt with in recvmsg rather than in the softirq
input code, but now jumbo packets are split/cloned before being processed
by the input code and the subpackets can be discarded individually.
So remove the recvmsg-side code for handling this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When retransmitting a packet, rxrpc_resend() shouldn't be attaching a ref
to the call to the txbuf as that pins the call and prevents the call from
clearing the packet buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: d57a3a1516 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Implement an in-kernel rxperf server to allow kernel-based rxrpc services
to be tested directly, unlike with AFS where they're accessed by the
fileserver when the latter decides it wants to.
This is implemented as a module that, if loaded, opens UDP port 7009
(afs3-rmtsys) and listens on it for incoming calls. Calls can be generated
using the rxperf command shipped with OpenAFS, for example.
Changes
=======
ver #2)
- Use min_t() instead of min().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: Jakub Kicinski <kuba@kernel.org>
Fix the following checker warning:
../net/rxrpc/key.c:692:9: error: subtraction of different types can't work (different address spaces)
Checker is wrong in this case, but cast the pointers to unsigned long to
avoid the warning.
Whilst we're at it, reduce the assertions to WARN_ON() and return an error.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
As the nla_nest_start() may fail with NULL returned, the return value needs
to be checked.
Fixes: ce08cd344a ("wifi: nl80211: expose link information for interfaces")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221129014211.56558-1-yuancan@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ping_lookup() does not acquire the table spinlock, so iteration should
use hlist_nulls_for_each_entry_rcu().
Spotted during code review.
Fixes: dbca1596bb ("ping: convert to RCU lookups, get rid of rwlock")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221129140644.28525-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Check for interval validity in all concatenation fields in
nft_set_pipapo, from Stefano Brivio.
2) Missing preemption disabled in conntrack and flowtable stat
updates, from Xin Long.
3) Fix compilation warning when CONFIG_NF_CONNTRACK_MARK=n.
Except for 3) which was a bug introduced in a recent fix in 6.1-rc
- anything else, broken for several releases.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark
netfilter: conntrack: fix using __this_cpu_add in preemptible
netfilter: flowtable_offload: fix using __this_cpu_add in preemptible
netfilter: nft_set_pipapo: Actually validate intervals in fields after the first one
====================
Link: https://lore.kernel.org/r/20221130121934.1125-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers only reported the driver name in their
devlink_ops::info_get() callback. Now that the core provides this
information, the callback became empty. For such drivers, just
removing the callback would prevent the core from executing
devlink_nl_info_fill() meaning that "devlink dev info" would not
return anything.
Make the callback function optional by executing
devlink_nl_info_fill() even if devlink_ops::info_get() is NULL.
N.B.: the drivers with devlink support which previously did not
implement devlink_ops::info_get() will now also be able to report
the driver name.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver name is available in device_driver::name. Right now,
drivers still have to report this piece of information themselves in
their devlink_ops::info_get callback function.
In order to factorize code, make devlink_nl_info_fill() add the driver
name attribute.
Now that the core sets the driver name attribute, drivers are not
supposed to call devlink_info_driver_name_put() anymore. Remove
devlink_info_driver_name_put() and clean-up all the drivers using this
function in their callback.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To read from a region, user space must currently request a new snapshot of
the region and then read from that snapshot. This can sometimes be overkill
if user space only reads a tiny portion. They first create the snapshot,
then request a read, then destroy the snapshot.
For regions which have a single underlying "contents", it makes sense to
allow supporting direct reading of the region data.
Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if
requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set,
then perform a direct read instead of using a snapshot. Direct read is
mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken
to ensure that we reject commands which provide incorrect attributes.
Regions must enable support for direct read by implementing the .read()
callback function. If a region does not support such direct reads, a
suitable extended error message is reported.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devlink_nl_region_read_snapshot_fill is used to copy the contents of
a snapshot into a message for reporting to userspace via the
DEVLINK_CMG_REGION_READ netlink message.
A future change is going to add support for directly reading from
a region. Almost all of the logic for this new capability is identical.
To help reduce code duplication and make this logic more generic,
refactor the function to take a cb and cb_priv pointer for doing the
actual copy.
Add a devlink_region_snapshot_fill implementation that will simply copy
the relevant chunk of the region. This does require allocating some
storage for the chunk as opposed to simply passing the correct address
forward to the devlink_nl_cmg_region_read_chunk_fill function.
A future change to implement support for directly reading from a region
without a snapshot will provide a separate implementation that calls the
newly added devlink region operation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devlink parameter of the devlink_nl_cmd_region_read_chunk_fill
function is not used. Remove it, to simplify the function signature.
Once removed, it is also obvious that the devlink parameter is not
necessary for the devlink_nl_region_read_snapshot_fill either.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The snapshot pointer is obtained inside of the function
devlink_nl_region_read_snapshot_fill. Simplify this function by locating
the snapshot upfront in devlink_nl_cmd_region_read_dumpit instead. This
aligns with how other netlink attributes are handled, and allows us to
exit slightly earlier if an invalid snapshot ID is provided.
It also allows us to pass the snapshot pointer directly to the
devlink_nl_region_read_snapshot_fill, and remove the now unused attrs
parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report extended error details in the devlink_nl_cmd_region_read_dumpit()
function, by using the extack structure from the netlink_callback.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The calculation for the data_size in the devlink_nl_read_snapshot_fill
function uses an if statement that is better expressed using the min_t
macro.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building the kernel with clang lto (CONFIG_LTO_CLANG_FULL=y), the
following compilation error will appear:
$ make LLVM=1 LLVM_IAS=1 -j
...
ld.lld: error: ld-temp.o <inline asm>:26889:1: symbol 'cgroup_storage_map_btf_ids' is already defined
cgroup_storage_map_btf_ids:;
^
make[1]: *** [/.../bpf-next/scripts/Makefile.vmlinux_o:61: vmlinux.o] Error 1
In local_storage.c, we have
BTF_ID_LIST_SINGLE(cgroup_storage_map_btf_ids, struct, bpf_local_storage_map)
Commit c4bcfb38a9 ("bpf: Implement cgroup storage available to
non-cgroup-attached bpf progs") added the above identical BTF_ID_LIST_SINGLE
definition in bpf_cgrp_storage.c. With duplicated definitions, llvm linker
complains with lto build.
Also, extracting btf_id of 'struct bpf_local_storage_map' is defined four times
for sk, inode, task and cgrp local storages. Let us define a single global one
with a different name than cgroup_storage_map_btf_ids, which also fixed
the lto compilation error.
Fixes: c4bcfb38a9 ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221130052147.1591625-1-yhs@fb.com
Use apply_bytes on ingress redirect, when apply_bytes is less than
the length of msg data, some data may be skipped and lost in
bpf_tcp_ingress().
If there is still data in the scatterlist that has not been consumed,
we cannot move the msg iter.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-4-git-send-email-yangpc@wangsu.com
When redirecting, we use sk_msg_to_ingress() to get the BPF_F_INGRESS
flag from the msg->flags. If apply_bytes is used and it is larger than
the current data being processed, sk_psock_msg_verdict() will not be
called when sendmsg() is called again. At this time, the msg->flags is 0,
and we lost the BPF_F_INGRESS flag.
So we need to save the BPF_F_INGRESS flag in sk_psock and use it when
redirection.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-3-git-send-email-yangpc@wangsu.com
In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.
We should reset the eval variable to __SK_NONE every time more_data
starts.
This causes:
IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
__tcp_transmit_skb+0xa1b/0xb90
? __alloc_skb+0x8c/0x1a0
? __kmalloc_node_track_caller+0x184/0x320
tcp_write_xmit+0x22a/0x1110
__tcp_push_pending_frames+0x32/0xf0
do_tcp_sendpages+0x62d/0x640
tcp_bpf_push+0xae/0x2c0
tcp_bpf_sendmsg_redir+0x260/0x410
? preempt_count_add+0x70/0xa0
tcp_bpf_send_verdict+0x386/0x4b0
tcp_bpf_sendmsg+0x21b/0x3b0
sock_sendmsg+0x58/0x70
__sys_sendto+0xfa/0x170
? xfd_validate_state+0x1d/0x80
? switch_fpu_return+0x59/0xe0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: cd9733f5d7 ("tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-2-git-send-email-yangpc@wangsu.com
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, the inetdev_destroy() function waits for an RCU grace period
before decrementing the refcount and freeing memory. This causes a delay
with a new RCU configuration that tries to save power, which results in the
network interface disappearing later than expected. The resulting delay
causes test failures on ChromeOS.
Refactor the code such that the refcount is freed before the grace period
and memory is freed after. With this a ChromeOS network test passes that
does 'ip netns del' and polls for an interface disappearing, now passes.
Reported-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In a networking test on ChromeOS, kernels built with the new
CONFIG_RCU_LAZY=y Kconfig option fail a networking test in the teardown
phase.
This failure may be reproduced as follows: ip netns del <name>
The CONFIG_RCU_LAZY=y Kconfig option was introduced by earlier commits
in this series for the benefit of certain battery-powered systems.
This Kconfig option causes call_rcu() to delay its callbacks in order
to batch them. This means that a given RCU grace period covers more
callbacks, thus reducing the number of grace periods, in turn reducing
the amount of energy consumed, which increases battery lifetime which
can be a very good thing. This is not a subtle effect: In some important
use cases, the battery lifetime is increased by more than 10%.
This CONFIG_RCU_LAZY=y option is available only for CPUs that offload
callbacks, for example, CPUs mentioned in the rcu_nocbs kernel boot
parameter passed to kernels built with CONFIG_RCU_NOCB_CPU=y.
Delaying callbacks is normally not a problem because most callbacks do
nothing but free memory. If the system is short on memory, a shrinker
will kick all currently queued lazy callbacks out of their laziness,
thus freeing their memory in short order. Similarly, the rcu_barrier()
function, which blocks until all currently queued callbacks are invoked,
will also kick lazy callbacks, thus enabling rcu_barrier() to complete
in a timely manner.
However, there are some cases where laziness is not a good option.
For example, synchronize_rcu() invokes call_rcu(), and blocks until
the newly queued callback is invoked. It would not be a good for
synchronize_rcu() to block for ten seconds, even on an idle system.
Therefore, synchronize_rcu() invokes call_rcu_hurry() instead of
call_rcu(). The arrival of a non-lazy call_rcu_hurry() callback on a
given CPU kicks any lazy callbacks that might be already queued on that
CPU. After all, if there is going to be a grace period, all callbacks
might as well get full benefit from it.
Yes, this could be done the other way around by creating a
call_rcu_lazy(), but earlier experience with this approach and
feedback at the 2022 Linux Plumbers Conference shifted the approach
to call_rcu() being lazy with call_rcu_hurry() for the few places
where laziness is inappropriate.
Returning to the test failure, use of ftrace showed that this failure
cause caused by the aadded delays due to this new lazy behavior of
call_rcu() in kernels built with CONFIG_RCU_LAZY=y.
Therefore, make dst_release() use call_rcu_hurry() in order to revert
to the old test-failure-free behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a new parameter to complement the existing 'netmask' option. The
main difference between netmask and bitmask is that bitmask takes any
arbitrary ip address as input, it does not have to be a valid netmask.
The name of the new parameter is 'bitmask'. This lets us mask out
arbitrary bits in the ip address, for example:
ipset create set1 hash:ip bitmask 255.128.255.0
ipset create set2 hash:ip,port family inet6 bitmask ffff::ff80
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need to have distinct functions. After merge, ipv6 can avoid
protooff computation if the connection neither needs sequence adjustment
nor helper invocation -- this is the normal case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
SCTP conntrack currently assumes that the SCTP endpoints will
probe secondary paths using HEARTBEAT before sending traffic.
But, according to RFC 9260, SCTP endpoints can send any traffic
on any of the confirmed paths after SCTP association is up.
SCTP endpoints that sends INIT will confirm all peer addresses
that upper layer configures, and the SCTP endpoint that receives
COOKIE_ECHO will only confirm the address it sent the INIT_ACK to.
So, we can have a situation where the INIT sender can start to
use secondary paths without the need to send HEARTBEAT. This patch
allows DATA/SACK packets to create new connection tracking entry.
A new state has been added to indicate that a DATA/SACK chunk has
been seen in the original direction - SCTP_CONNTRACK_DATA_SENT.
State transitions mostly follows the HEARTBEAT_SENT, except on
receiving HEARTBEAT/HEARTBEAT_ACK/DATA/SACK in the reply direction.
State transitions in original direction:
- DATA_SENT behaves similar to HEARTBEAT_SENT for all chunks,
except that it remains in DATA_SENT on receving HEARTBEAT,
HEARTBEAT_ACK/DATA/SACK chunks
State transitions in reply direction:
- DATA_SENT behaves similar to HEARTBEAT_SENT for all chunks,
except that it moves to HEARTBEAT_ACKED on receiving
HEARTBEAT/HEARTBEAT_ACK/DATA/SACK chunks
Note: This patch still doesn't solve the problem when the SCTP
endpoint decides to use primary paths for association establishment
but uses a secondary path for association shutdown. We still have
to depend on timeout for connections to expire in such a case.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently in nf_conntrack_hash_check_insert(), when it fails in
nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the
preemptible context, a call trace can be triggered:
BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636
caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
check_preemption_disabled+0xc3/0xf0
nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink]
ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink]
netlink_rcv_skb+0x50/0x100
nfnetlink_rcv+0x65/0x144 [nfnetlink]
netlink_unicast+0x1ae/0x290
netlink_sendmsg+0x257/0x4f0
sock_sendmsg+0x5f/0x70
This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for
nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(),
as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm().
Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is
safe to use NF_CT_STAT_INC(), as it's under local_bh_disable().
Fixes: c56716c69c ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Steffen Klassert says:
====================
ipsec-next 2022-11-26
1) Remove redundant variable in esp6.
From Colin Ian King.
2) Update x->lastused for every packet. It was used only for
outgoing mobile IPv6 packets, but showed to be usefull
to check if the a SA is still in use in general.
From Antony Antony.
3) Remove unused variable in xfrm_byidx_resize.
From Leon Romanovsky.
4) Finalize extack support for xfrm.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add extack to xfrm_set_spdinfo
xfrm: add extack to xfrm_alloc_userspi
xfrm: add extack to xfrm_do_migrate
xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
xfrm: add extack to xfrm_del_sa
xfrm: add extack to xfrm_add_sa_expire
xfrm: a few coding style clean ups
xfrm: Remove not-used total variable
xfrm: update x->lastused for every packet
esp6: remove redundant variable err
====================
Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goal of this socket option is to set different keys per listener,
see commit 1fba70e5b6 ("tcp: socket option to set TCP fast open key")
for more details about this socket option.
The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TCP_FASTOPEN socket option is one way for the application to tell
the kernel TFO support has to be enabled for the listener socket.
The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The send_synack() needs to be overridden for MPTCP to support TFO for
two reasons:
- There is not be enough space in the TCP options if the TFO cookie has
to be added in the SYN+ACK with other options: MSS (4), SACK OK (2),
Timestamps (10), Window Scale (3+1), TFO (10+2), MP_CAPABLE (12).
MPTCPv1 specs -- RFC 8684, section B.1 [1] -- suggest to drop the TCP
timestamps option in this case.
- The data received in the SYN has to be handled: the SKB can be
dequeued from the subflow sk and transferred to the MPTCP sk. Counters
need to be updated accordingly and the application can be notified at
the end because some bytes have been received.
[1] https://www.rfc-editor.org/rfc/rfc8684.html#section-b.1
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With fastopen in place, the first subflow socket is created before the
MPC handshake completes, and we need to properly initialize the sequence
numbers at MPC ACK reception.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the initial ack sequence is generated on demand whenever
it's requested and the remote key is handy. The relevant code is
scattered in different places and can lead to multiple, unneeded,
crypto operations.
This change consolidates the ack sequence generation code in a single
helper, storing the sequence number at the subflow level.
The above additionally saves a few conditional in fast-path and will
simplify the upcoming fast-open implementation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently in the receive path we don't need to discriminate
between MPC SYN, MPC SYN-ACK and MPC ACK, but soon the fastopen
code will need that info to properly track the fully established
status.
Track the exact MPC suboption type into the receive opt bitmap.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 54f1944ed6 ("mptcp: factor out mptcp_connect()"), all the
infrastructure is now in place to support the MSG_FASTOPEN flag, we
just need to call into the fastopen path in mptcp_sendmsg().
Co-developed-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0Lnw
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
As the nla_nest_start() may fail with NULL returned, the return value
should be checked.
Note that this is not a real bug, nothing will break here.
The next nla_put() will fail as well and we'll bail (and
nla_nest_cancel() can handle NULL). But we keep getting
those "fixes" so whatever.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221129013934.55184-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CHECKSUM_COMPLETE signals that skb->csum stores the sum over the
entire packet. It does not imply that an embedded l4 checksum
field has been validated.
Fixes: 682f048bd4 ("af_packet: pass checksum validation status to the user")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an internal trace when valid beacons are received.
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Let's introduce the basics for advertizing discovered PANs and
coordinators, which is:
- A new "scan" netlink message group.
- A couple of netlink command/attribute.
- The main netlink helper to send a netlink message with all the
necessary information to forward the main information to the user.
Two netlink attributes are proactively added to support future UWB
complex channels, but are not actually used yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
As the return value is not 0 only in case there is no such notifier
block registered, add a WARN_ON_ONCE() to yell about it.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20221125100255.1786741-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
