5c0b485a8c
12492 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kuniyuki Iwashima
|
5c0b485a8c |
udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
syzkaller triggered the warning [0] in udp_v4_early_demux().
In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount
of the looked-up sk and use sock_pfree() as skb->destructor, so we check
SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace
period.
Currently, SOCK_RCU_FREE is flagged for a bound socket after being put
into the hash table. Moreover, the SOCK_RCU_FREE check is done too early
in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race
window:
CPU1 CPU2
---- ----
udp_v4_early_demux() udp_lib_get_port()
| |- hlist_add_head_rcu()
|- sk = __udp4_lib_demux_lookup() |
|- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk));
`- sock_set_flag(sk, SOCK_RCU_FREE)
We had the same bug in TCP and fixed it in commit
|
||
Eric Dumazet
|
97a9063518 |
tcp: avoid too many retransmit packets
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit |
||
Neal Cardwell
|
0ec986ed7b |
tcp: fix incorrect undo caused by DSACK of TLP retransmit
Loss recovery undo_retrans bookkeeping had a long-standing bug where a DSACK from a spurious TLP retransmit packet could cause an erroneous undo of a fast recovery or RTO recovery that repaired a single really-lost packet (in a sequence range outside that of the TLP retransmit). Basically, because the loss recovery state machine didn't account for the fact that it sent a TLP retransmit, the DSACK for the TLP retransmit could erroneously be implicitly be interpreted as corresponding to the normal fast recovery or RTO recovery retransmit that plugged a real hole, thus resulting in an improper undo. For example, consider the following buggy scenario where there is a real packet loss but the congestion control response is improperly undone because of this bug: + send packets P1, P2, P3, P4 + P1 is really lost + send TLP retransmit of P4 + receive SACK for original P2, P3, P4 + enter fast recovery, fast-retransmit P1, increment undo_retrans to 1 + receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!) + receive cumulative ACK for P1-P4 (fast retransmit plugged real hole) The fix: when we initialize undo machinery in tcp_init_undo(), if there is a TLP retransmit in flight, then increment tp->undo_retrans so that we make sure that we receive a DSACK corresponding to the TLP retransmit, as well as DSACKs for all later normal retransmits, before triggering a loss recovery undo. Note that we also have to move the line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO we remember the tp->tlp_high_seq value until tcp_init_undo() and clear it only afterward. Also note that the bug dates back to the original 2013 TLP implementation, commit |
||
Shigeru Yoshida
|
61cf1c739f |
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
[1]
BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline]
BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
raw_lookup net/ipv4/raw_diag.c:49 [inline]
raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
inet_diag_cmd_exact+0x7d9/0x980
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x332/0x3d0 net/socket.c:745
____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
__sys_sendmsg net/socket.c:2668 [inline]
__do_sys_sendmsg net/socket.c:2677 [inline]
__se_sys_sendmsg net/socket.c:2675 [inline]
__x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71
raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
inet_diag_cmd_exact+0x7d9/0x980
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x332/0x3d0 net/socket.c:745
____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
__sys_sendmsg net/socket.c:2668 [inline]
__do_sys_sendmsg net/socket.c:2677 [inline]
__se_sys_sendmsg net/socket.c:2675 [inline]
__x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable req.i created at:
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline]
inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Fixes:
|
||
|
Kuniyuki Iwashima
|
4b74726c01 |
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
When we process segments with TCP AO, we don't check it in
tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1,
which unconditionally triggers the BPF TCP option parser.
Let's avoid the unnecessary BPF invocation.
Fixes:
|
||
Jakub Kicinski
|
66be40e622 |
tcp_metrics: validate source addr length
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes:
|
||
|
Neal Cardwell
|
a6458ab7fd |
UPSTREAM: tcp: fix DSACK undo in fast recovery to call tcp_try_to_open()
In some production workloads we noticed that connections could
sometimes close extremely prematurely with ETIMEDOUT after
transmitting only 1 TLP and RTO retransmission (when we would normally
expect roughly tcp_retries2 = TCP_RETR2 = 15 RTOs before a connection
closes with ETIMEDOUT).
From tracing we determined that these workloads can suffer from a
scenario where in fast recovery, after some retransmits, a DSACK undo
can happen at a point where the scoreboard is totally clear (we have
retrans_out == sacked_out == lost_out == 0). In such cases, calling
tcp_try_keep_open() means that we do not execute any code path that
clears tp->retrans_stamp to 0. That means that tp->retrans_stamp can
remain erroneously set to the start time of the undone fast recovery,
even after the fast recovery is undone. If minutes or hours elapse,
and then a TLP/RTO/RTO sequence occurs, then the start_ts value in
retransmits_timed_out() (which is from tp->retrans_stamp) will be
erroneously ancient (left over from the fast recovery undone via
DSACKs). Thus this ancient tp->retrans_stamp value can cause the
connection to die very prematurely with ETIMEDOUT via
tcp_write_err().
The fix: we change DSACK undo in fast recovery (TCP_CA_Recovery) to
call tcp_try_to_open() instead of tcp_try_keep_open(). This ensures
that if no retransmits are in flight at the time of DSACK undo in fast
recovery then we properly zero retrans_stamp. Note that calling
tcp_try_to_open() is more consistent with other loss recovery
behavior, since normal fast recovery (CA_Recovery) and RTO recovery
(CA_Loss) both normally end when tp->snd_una meets or exceeds
tp->high_seq and then in tcp_fastretrans_alert() the "default" switch
case executes tcp_try_to_open(). Also note that by inspection this
change to call tcp_try_to_open() implies at least one other nice bug
fix, where now an ECE-marked DSACK that causes an undo will properly
invoke tcp_enter_cwr() rather than ignoring the ECE mark.
Fixes:
|
||
|
Neal Cardwell
|
5dfe9d2739 |
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
Testing determined that the recent commit |
||
luoxuanqiang
|
ff46e3b442 |
Fix race for duplicate reqsk on identical SYN
When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().
These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.
The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.
========================================================================
This behavior is consistently reproducible in my local setup,
which comprises:
| NETA1 ------ NETB1 |
PC_A --- bond --- | | --- bond --- PC_B
| NETA2 ------ NETB2 |
- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
bonded these two cards using BOND_MODE_BROADCAST mode and configured
them to be handled by different CPU.
- PC_B is the Client, also equipped with two network cards, NETB1 and
NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.
If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,
Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.
========================================================================
The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.
Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.
Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.
Fixes:
|
||
Dmitry Safonov
|
f9ae848904 |
net/tcp_ao: Don't leak ao_info on error-path
It seems I introduced it together with TCP_AO_CMDF_AO_REQUIRED, on
version 5 [1] of TCP-AO patches. Quite frustrative that having all these
selftests that I've written, running kmemtest & kcov was always in todo.
[1]: https://lore.kernel.org/netdev/20230215183335.800122-5-dima@arista.com/
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617072451.1403e1d2@kernel.org/
Fixes:
|
||
|
Eric Dumazet
|
9e046bb111 |
tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()
Some applications were reporting ETIMEDOUT errors on apparently
good looking flows, according to packet dumps.
We were able to root cause the issue to an accidental setting
of tp->retrans_stamp in the following scenario:
- client sends TFO SYN with data.
- server has TFO disabled, ACKs only SYN but not payload.
- client receives SYNACK covering only SYN.
- tcp_ack() eats SYN and sets tp->retrans_stamp to 0.
- tcp_rcv_fastopen_synack() calls tcp_xmit_retransmit_queue()
to retransmit TFO payload w/o SYN, sets tp->retrans_stamp to "now",
but we are not in any loss recovery state.
- TFO payload is ACKed.
- we are not in any loss recovery state, and don't see any dupacks,
so we don't get to any code path that clears tp->retrans_stamp.
- tp->retrans_stamp stays non-zero for the lifetime of the connection.
- after first RTO, tcp_clamp_rto_to_user_timeout() clamps second RTO
to 1 jiffy due to bogus tp->retrans_stamp.
- on clamped RTO with non-zero icsk_retransmits, retransmits_timed_out()
sets start_ts from tp->retrans_stamp from TFO payload retransmit
hours/days ago, and computes bogus long elapsed time for loss recovery,
and suffers ETIMEDOUT early.
Fixes:
|
||
Ondrej Mosnacek
|
89aa3619d1 |
cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO options
As the comment in this function says, the code currently just clears the CIPSO part with IPOPT_NOP, rather than removing it completely and trimming the packet. The other cipso_v4_*_delattr() functions, however, do the proper removal and also calipso_skbuff_delattr() makes an effort to remove the CALIPSO options instead of replacing them with padding. Some routers treat IPv4 packets with anything (even NOPs) in the option header as a special case and take them through a slower processing path. Consequently, hardening guides such as STIG recommend to configure such routers to drop packets with non-empty IP option headers [1][2]. Thus, users might expect NetLabel to produce packets with minimal padding (or at least with no padding when no actual options are present). Implement the proper option removal to address this and to be closer to what the peer functions do. [1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937 [2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001 Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Ondrej Mosnacek
|
9f36169912 |
cipso: fix total option length computation
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes:
|
||
|
Eric Dumazet
|
36534d3c54 |
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
Due to timer wheel implementation, a timer will usually fire
after its schedule.
For instance, for HZ=1000, a timeout between 512ms and 4s
has a granularity of 64ms.
For this range of values, the extra delay could be up to 63ms.
For TCP, this means that tp->rcv_tstamp may be after
inet_csk(sk)->icsk_timeout whenever the timer interrupt
finally triggers, if one packet came during the extra delay.
We need to make sure tcp_rtx_probe0_timed_out() handles this case.
Fixes:
|
||
|
Jakub Kicinski
|
5b4b62a169 |
rtnetlink: make the "split" NLM_DONE handling generic
Jaroslav reports Dell's OMSA Systems Management Data Engine expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo() and inet_dump_ifaddr(). We already added a similar fix previously in commit |
||
Jason Xing
|
a46d0ea5c9 |
tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB
According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.
Fixes:
|
||
|
Jakub Kicinski
|
a535d59432 |
net: tls: fix marking packets as decrypted
For TLS offload we mark packets with skb->decrypted to make sure
they don't escape the host without getting encrypted first.
The crypto state lives in the socket, so it may get detached
by a call to skb_orphan(). As a safety check - the egress path
drops all packets with skb->decrypted and no "crypto-safe" socket.
The skb marking was added to sendpage only (and not sendmsg),
because tls_device injected data into the TCP stack using sendpage.
This special case was missed when sendpage got folded into sendmsg.
Fixes:
|
||
|
Dmitry Safonov
|
33700a0c9b |
net/tcp: Don't consider TCP_CLOSE in TCP_AO_ESTABLISHED
TCP_CLOSE may or may not have current/rnext keys and should not be
considered "established". The fast-path for TCP_CLOSE is
SKB_DROP_REASON_TCP_CLOSE. This is what tcp_rcv_state_process() does
anyways. Add an early drop path to not spend any time verifying
segment signatures for sockets in TCP_CLOSE state.
Cc: stable@vger.kernel.org # v6.7
Fixes:
|
||
Paolo Abeni
|
e889eb17f4 |
netfilter pull request 24-05-29
-----BEGIN PGP SIGNATURE-----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=cexP
-----END PGP SIGNATURE-----
Merge tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 syzbot reports that nf_reinject() could be called without
rcu_read_lock() when flushing pending packets at nfnetlink
queue removal, from Eric Dumazet.
Patch #2 flushes ipset list:set when canceling garbage collection to
reference to other lists to fix a race, from Jozsef Kadlecsik.
Patch #3 restores q-in-q matching with nft_payload by reverting
|
||
Alexander Mikhalitsyn
|
b8c8abefc0 |
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
A recent change to inet_dump_ifaddr had the function incorrectly iterate
over net rather than tgt_net, resulting in the data coming for the
incorrect network namespace.
Fixes:
|
||
|
Eric Dumazet
|
92f1655aa2 |
net: fix __dst_negative_advice() race
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes:
|
||
Florian Westphal
|
21a673bddc |
netfilter: tproxy: bail out if IP has been disabled on the device
syzbot reports:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
[..]
RIP: 0010:nf_tproxy_laddr4+0xb7/0x340 net/ipv4/netfilter/nf_tproxy_ipv4.c:62
Call Trace:
nft_tproxy_eval_v4 net/netfilter/nft_tproxy.c:56 [inline]
nft_tproxy_eval+0xa9a/0x1a00 net/netfilter/nft_tproxy.c:168
__in_dev_get_rcu() can return NULL, so check for this.
Reported-and-tested-by: syzbot+b94a6818504ea90d7661@syzkaller.appspotmail.com
Fixes:
|
||
|
Eric Dumazet
|
f4dca95fc0 |
tcp: reduce accepted window in NEW_SYN_RECV state
Jason commit made checks against ACK sequence less strict
and can be exploited by attackers to establish spoofed flows
with less probes.
Innocent users might use tcp_rmem[1] == 1,000,000,000,
or something more reasonable.
An attacker can use a regular TCP connection to learn the server
initial tp->rcv_wnd, and use it to optimize the attack.
If we make sure that only the announced window (smaller than 65535)
is used for ACK validation, we force an attacker to use
65537 packets to complete the 3WHS (assuming server ISN is unknown)
Fixes:
|
||
Willem de Bruijn
|
be008726d0 |
net: gro: initialize network_offset in network layer
Syzkaller was able to trigger
kernel BUG at net/core/gro.c:424 !
RIP: 0010:gro_pull_from_frag0 net/core/gro.c:424 [inline]
RIP: 0010:gro_try_pull_from_frag0 net/core/gro.c:446 [inline]
RIP: 0010:dev_gro_receive+0x242f/0x24b0 net/core/gro.c:571
Due to using an incorrect NAPI_GRO_CB(skb)->network_offset.
The referenced commit sets this offset to 0 in skb_gro_reset_offset.
That matches the expected case in dev_gro_receive:
pp = INDIRECT_CALL_INET(ptype->callbacks.gro_receive,
ipv6_gro_receive, inet_gro_receive,
&gro_list->list, skb);
But syzkaller injected an skb with protocol ETH_P_TEB into an ip6gre
device (by writing the IP6GRE encapsulated version to a TAP device).
The result was a first call to eth_gro_receive, and thus an extra
ETH_HLEN in network_offset that should not be there. First issue hit
is when computing offset from network header in ipv6_gro_pull_exthdrs.
Initialize both offsets in the network layer gro_receive.
This pairs with all reads in gro_receive, which use
skb_gro_receive_network_offset().
Fixes:
|
||
Ido Schimmel
|
7b05ab85e2 |
ipv4: Fix address dump when IPv4 is disabled on an interface
Cited commit started returning an error when user space requests to dump
the interface's IPv4 addresses and IPv4 is disabled on the interface.
Restore the previous behavior and do not return an error.
Before cited commit:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
inet6 fe80::e040:68ff:fe98:d018/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
After cited commit:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 32:2d:69:f2:9c:99 brd ff:ff:ff:ff:ff:ff
inet6 fe80::302d:69ff:fef2:9c99/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
RTNETLINK answers: No such device
Dump terminated
With this patch:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
inet6 fe80::dc17:56ff:febb:57c0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
I fixed the exact same issue for IPv6 in commit
|
||
Linus Torvalds
|
66ad4829dd |
Quite smaller than usual. Notably it includes the fix for the unix
regression you have been notified of in the past weeks. The TCP window fix will require some follow-up, already queued. Current release - regressions: - af_unix: fix garbage collection of embryos Previous releases - regressions: - af_unix: fix race between GC and receive path - ipv6: sr: fix missing sk_buff release in seg6_input_core - tcp: remove 64 KByte limit for initial tp->rcv_wnd value - eth: r8169: fix rx hangup - eth: lan966x: remove ptp traps in case the ptp is not enabled. - eth: ixgbe: fix link breakage vs cisco switches. - eth: ice: prevent ethtool from corrupting the channels. Previous releases - always broken: - openvswitch: set the skbuff pkt_type for proper pmtud support. - tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). Misc: - a bunch of selftests stabilization patches. Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmZPXmUSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOk/o4QAJTA/LcQmHkObgQWyJ7vSykhRFmxSsfR Qc/DstWuNkM+xDbasdjlxaM+BPgf0RduyB/bsPOr8UvGw0S0NUwQBC9V9bgQ0p67 D9qrZH6gEDRbzG+mkbF49SXksJMSdNSygWc4YnYaCW+eufpCaZwN15q+4pAgAWfW UmSra9wCkgl9nRc7N4+UEJbhhi0Lso/yaRlHUUUooHOP0ENDe3JSKidUyS3UuhYc Ah75gKIMm9BygUhg/+mrsRyeb1kfXMfJ54ku/uEIimErG4rTntCJCAc+dBoRXtob pImg4xfgr1OBL1wQKTHM+nvhE+DThLAJOSguX2RYvTvklx/l00tL1PQkA/kn6XNM HdQGnDoN1JpUs3xw90hxWp0gzOwJ1XCjbXT/Dx2kp+ltFj0A1EZViTNNTgh6y2E0 B5oo8NFD0y02ilMdaGW/KOpceglO82p2P4DEc0kBAYvCICQ8MKMdtThuubQeB0FK EO7Xs7lKbDXLJUDtmN4EiE1sofvLVD+1htGt5FG2jtizyQ5Ho/b2aTk2uq0kRN3F mZgaXcNR3sOJGBdaTvzquALZ2Dt69w0D3EHGv/30tD5zwQO8j71W5OoWTnjknWUp Nh7ytL/YlqvwJI47UuuTeDBh95jb/KpTWFv8EYsQLI0JOTfa1VXsoDxidg6rnHuX mvLdIOtzTZqU =zd2T -----END PGP SIGNATURE----- Merge tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite smaller than usual. Notably it includes the fix for the unix regression from the past weeks. The TCP window fix will require some follow-up, already queued. Current release - regressions: - af_unix: fix garbage collection of embryos Previous releases - regressions: - af_unix: fix race between GC and receive path - ipv6: sr: fix missing sk_buff release in seg6_input_core - tcp: remove 64 KByte limit for initial tp->rcv_wnd value - eth: r8169: fix rx hangup - eth: lan966x: remove ptp traps in case the ptp is not enabled - eth: ixgbe: fix link breakage vs cisco switches - eth: ice: prevent ethtool from corrupting the channels Previous releases - always broken: - openvswitch: set the skbuff pkt_type for proper pmtud support - tcp: Fix shift-out-of-bounds in dctcp_update_alpha() Misc: - a bunch of selftests stabilization patches" * tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits) r8169: Fix possible ring buffer corruption on fragmented Tx packets. idpf: Interpret .set_channels() input differently ice: Interpret .set_channels() input differently nfc: nci: Fix handling of zero-length payload packets in nci_rx_work() net: relax socket state check at accept time. tcp: remove 64 KByte limit for initial tp->rcv_wnd value net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() tls: fix missing memory barrier in tls_init net: fec: avoid lock evasion when reading pps_enable Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI" testing: net-drv: use stats64 for testing net: mana: Fix the extra HZ in mana_hwc_send_request net: lan966x: Remove ptp traps in case the ptp is not enabled. openvswitch: Set the skbuff pkt_type for proper pmtud support. selftest: af_unix: Make SCM_RIGHTS into OOB data. af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). selftests/net: use tc rule to filter the na packet ipv6: sr: fix memleak in seg6_hmac_init_algo af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock. ... |
||
|
Paolo Abeni
|
26afda78cd |
net: relax socket state check at accept time.
Christoph reported the following splat: WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0 Modules linked in: CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759 Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80 RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293 RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64 R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000 R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800 FS: 000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786 do_accept+0x435/0x620 net/socket.c:1929 __sys_accept4_file net/socket.c:1969 [inline] __sys_accept4+0x9b/0x110 net/socket.c:1999 __do_sys_accept net/socket.c:2016 [inline] __se_sys_accept net/socket.c:2013 [inline] __x64_sys_accept+0x7d/0x90 net/socket.c:2013 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x4315f9 Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300 R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055 </TASK> The reproducer invokes shutdown() before entering the listener status. After commit |
||
|
Jason Xing
|
378979e94e |
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
Recently, we had some servers upgraded to the latest kernel and noticed the indicator from the user side showed worse results than before. It is caused by the limitation of tp->rcv_wnd. In 2018 commit |
||
|
Kuniyuki Iwashima
|
3ebc46ca86 |
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
In dctcp_update_alpha(), we use a module parameter dctcp_shift_g
as follows:
alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g);
...
delivered_ce <<= (10 - dctcp_shift_g);
It seems syzkaller started fuzzing module parameters and triggered
shift-out-of-bounds [0] by setting 100 to dctcp_shift_g:
memcpy((void*)0x20000080,
"/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47);
res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul,
/*flags=*/2ul, /*mode=*/0ul);
memcpy((void*)0x20000000, "100\000", 4);
syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul);
Let's limit the max value of dctcp_shift_g by param_set_uint_minmax().
With this patch:
# echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
# cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g
10
# echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
-bash: echo: write error: Invalid argument
[0]:
UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12
shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int')
CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468
dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143
tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline]
tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948
tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711
tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937
sk_backlog_rcv include/net/sock.h:1106 [inline]
__release_sock+0x20f/0x350 net/core/sock.c:2983
release_sock+0x61/0x1f0 net/core/sock.c:3549
mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907
mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976
__mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072
mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127
inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437
__sock_release net/socket.c:659 [inline]
sock_close+0xc0/0x240 net/socket.c:1421
__fput+0x41b/0x890 fs/file_table.c:422
task_work_run+0x23b/0x300 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x9c8/0x2540 kernel/exit.c:878
do_group_exit+0x201/0x2b0 kernel/exit.c:1027
__do_sys_exit_group kernel/exit.c:1038 [inline]
__se_sys_exit_group kernel/exit.c:1036 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f6c2b5005b6
Code: Unable to access opcode bytes at 0x7f6c2b50058c.
RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6
RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0
R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Yue Sun <samsun1006219@gmail.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/
Fixes:
|
||
|
Linus Torvalds
|
89721e3038 |
net-accept-more-20240515
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmZFcFwQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpuP1EADKJOJRtcvO/av2cUR+HZFDC+s/jBwHIJK+ 4UY633zQlxjqc7dt4rX7zk/uk4mkhZnsGY+wS6xH08kB3VO9YksrwREVt6Ur9lP8 UXNVPpPcZ7fFcIp41rYkZX9pTDp2N8z2qsVg7V8wcXJ7EeTXd6L4ZLjhfCiHvs2s i6yIEwLrW+voYuqSFV7vWBIM3mSXSRTIiO2DqRAOtT2lsj374DOthvP2lOSSb5wq 6TF4s4z3HMGs+HF3rjP5kJ6ic6RdC6i31lzEivUMhwCiKN1AZXdp96KXaC+NVPRV t5//EdS+pSenQgkg6XH7d5kzFoCUFJfVZt05w0GCqMA081Q9ySjUymN1zedJbGd9 8CDlW01N8XLqG6+F9yakJLSFY+mUFGduPuueTNiUJWP8kTkQCtYIRzZDeyjxQrE5 c17NW5S1uWkf26Ucyi1r+gxw9N4kGkuB3+NitC6DOc7BW5CocEIoqLWi/UH7cEZe 0v6loTakqBAdgh03RCDMUj9Rt/37pQs2KFT9/CazVpbkvkKsue4xK4K2CUFsxqOj qcoc/LD62at4S3AUWwhUIs3YaQ7v/6AY5hIktqAwsFHmDffUbPdRrXWY1keKIprJ 4qS/sY0M+kvKGnp+80fPVHab9l6/fMLfabIyFuh0M3W/M4eHGt2YfKWreoGEy/1x xLq2iq+ehw== =S6Xt -----END PGP SIGNATURE----- Merge tag 'net-accept-more-20240515' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept requests. This is very similar to previous work that enabled the same hint for doing receives on sockets. By far the majority of the work here is refactoring to enable the networking side to pass back whether or not the socket had more pending requests after accepting the current one, the last patch just wires it up for io_uring. Not only does this enable applications to know whether there are more connections to accept right now, it also enables smarter logic for io_uring multishot accept on whether to retry immediately or wait for a poll trigger" * tag 'net-accept-more-20240515' of git://git.kernel.dk/linux: io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept net: pass back whether socket was empty post accept net: have do_accept() take a struct proto_accept_arg argument net: change proto and proto_ops accept type |
||
|
Jakub Kicinski
|
654de42f3f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jason Xing
|
11f46ea981 |
tcp: rstreason: fully support in tcp_check_req()
We're going to send an RST due to invalid syn packet which is already checked whether 1) it is in sequence, 2) it is a retransmitted skb. As RFC 793 says, if the state of socket is not CLOSED/LISTEN/SYN-SENT, then we should send an RST when receiving bad syn packet: "fourth, check the SYN bit,...If the SYN is in the window it is an error, send a reset" Signed-off-by: Jason Xing <kernelxing@tencent.com> Link: https://lore.kernel.org/r/20240510122502.27850-6-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jason Xing
|
22a3255775 |
tcp: rstreason: handle timewait cases in the receive path
There are two possible cases where TCP layer can send an RST. Since they happen in the same place, I think using one independent reason is enough to identify this special situation. Signed-off-by: Jason Xing <kernelxing@tencent.com> Link: https://lore.kernel.org/r/20240510122502.27850-5-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jens Axboe
|
7951e36ac6 |
net: pass back whether socket was empty post accept
This adds an 'is_empty' argument to struct proto_accept_arg, which can be used to pass back information on whether or not the given socket has more connections to accept post the one just accepted. To utilize this information, the caller should initialize the 'is_empty' field to, eg, -1 and then check for 0/1 after the accept. If the field has been set, the caller knows whether there are more pending connections or not. If the field remains -1 after the accept call, the protocol doesn't support passing back this information. This patch wires it up for ipv4/6 TCP. Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
92ef0fd55a |
net: change proto and proto_ops accept type
Rather than pass in flags, error pointer, and whether this is a kernel invocation or not, add a struct proto_accept_arg struct as the argument. This then holds all of these arguments, and prepares accept for being able to pass back more information. No functional changes in this patch. Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
6e62702feb |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGcZAAKCRDbK58LschI g6o6APwLsqhrM2w71VUN5ciCxu4H5VDtZp6wkdqtVbxxU4qNxQEApKgYgKt8ZLF3 Kily5c7m+S4ZXhMX21rb8JhSAz0dfQk= =5Dk7 -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-05-13 We've added 119 non-merge commits during the last 14 day(s) which contain a total of 134 files changed, 9462 insertions(+), 4742 deletions(-). The main changes are: 1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi. 2) Add BPF range computation improvements to the verifier in particular around XOR and OR operators, refactoring of checks for range computation and relaxing MUL range computation so that src_reg can also be an unknown scalar, from Cupertino Miranda. 3) Add support to attach kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. Session mode is a common use-case for tetragon and bpftrace, from Jiri Olsa. 4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf as well as BPF selftest's struct_ops handling, from Andrii Nakryiko. 5) Improvements to BPF selftests in context of BPF gcc backend, from Jose E. Marchesi & David Faust. 6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test- -style in order to retire the old test, run it in BPF CI and additionally expand test coverage, from Jordan Rife. 7) Big batch for BPF selftest refactoring in order to remove duplicate code around common network helpers, from Geliang Tang. 8) Another batch of improvements to BPF selftests to retire obsolete bpf_tcp_helpers.h as everything is available vmlinux.h, from Martin KaFai Lau. 9) Fix BPF map tear-down to not walk the map twice on free when both timer and wq is used, from Benjamin Tissoires. 10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL, from Alexei Starovoitov. 11) Change BTF build scripts to using --btf_features for pahole v1.26+, from Alan Maguire. 12) Small improvements to BPF reusing struct_size() and krealloc_array(), from Andy Shevchenko. 13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions, from Ilya Leoshkevich. 14) Extend TCP ->cong_control() callback in order to feed in ack and flag parameters and allow write-access to tp->snd_cwnd_stamp from BPF program, from Miao Xu. 15) Add support for internal-only per-CPU instructions to inline bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs, from Puranjay Mohan. 16) Follow-up to remove the redundant ethtool.h from tooling infrastructure, from Tushar Vyavahare. 17) Extend libbpf to support "module:<function>" syntax for tracing programs, from Viktor Malik. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits) bpf: make list_for_each_entry portable bpf: ignore expected GCC warning in test_global_func10.c bpf: disable strict aliasing in test_global_func9.c selftests/bpf: Free strdup memory in xdp_hw_metadata selftests/bpf: Fix a few tests for GCC related warnings. bpf: avoid gcc overflow warning in test_xdp_vlan.c tools: remove redundant ethtool.h from tooling infra selftests/bpf: Expand ATTACH_REJECT tests selftests/bpf: Expand getsockname and getpeername tests sefltests/bpf: Expand sockaddr hook deny tests selftests/bpf: Expand sockaddr program return value tests selftests/bpf: Retire test_sock_addr.(c|sh) selftests/bpf: Remove redundant sendmsg test cases selftests/bpf: Migrate ATTACH_REJECT test cases selftests/bpf: Migrate expected_attach_type tests selftests/bpf: Migrate wildcard destination rewrite test selftests/bpf: Migrate sendmsg6 v4 mapped address tests selftests/bpf: Migrate sendmsg deny test cases selftests/bpf: Migrate WILDCARD_IP test selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases ... ==================== Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Davide Caratti
|
8ec9897ec2 |
netlabel: fix RCU annotation for IPv4 options on socket creation
Xiumei reports the following splat when netlabel and TCP socket are used:
=============================
WARNING: suspicious RCU usage
6.9.0-rc2+ #637 Not tainted
-----------------------------
net/ipv4/cipso_ipv4.c:1880 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ncat/23333:
#0: ffffffff906030c0 (rcu_read_lock){....}-{1:2}, at: netlbl_sock_setattr+0x25/0x1b0
stack backtrace:
CPU: 11 PID: 23333 Comm: ncat Kdump: loaded Not tainted 6.9.0-rc2+ #637
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<TASK>
dump_stack_lvl+0xa9/0xc0
lockdep_rcu_suspicious+0x117/0x190
cipso_v4_sock_setattr+0x1ab/0x1b0
netlbl_sock_setattr+0x13e/0x1b0
selinux_netlbl_socket_post_create+0x3f/0x80
selinux_socket_post_create+0x1a0/0x460
security_socket_post_create+0x42/0x60
__sock_create+0x342/0x3a0
__sys_socket_create.part.22+0x42/0x70
__sys_socket+0x37/0xb0
__x64_sys_socket+0x16/0x20
do_syscall_64+0x96/0x180
? do_user_addr_fault+0x68d/0xa30
? exc_page_fault+0x171/0x280
? asm_exc_page_fault+0x22/0x30
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7fbc0ca3fc1b
Code: 73 01 c3 48 8b 0d 05 f2 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 29 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 f1 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff18635208 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fbc0ca3fc1b
RDX: 0000000000000006 RSI: 0000000000000001 RDI: 0000000000000002
RBP: 000055d24f80f8a0 R08: 0000000000000003 R09: 0000000000000001
R10: 0000000000020000 R11: 0000000000000246 R12: 000055d24f80f8a0
R13: 0000000000000000 R14: 000055d24f80fb88 R15: 0000000000000000
</TASK>
The current implementation of cipso_v4_sock_setattr() replaces IP options
under the assumption that the caller holds the socket lock; however, such
assumption is not true, nor needed, in selinux_socket_post_create() hook.
Let all callers of cipso_v4_sock_setattr() specify the "socket lock held"
condition, except selinux_socket_post_create() _ where such condition can
safely be set as true even without holding the socket lock.
Fixes:
|
||
Matthieu Baerts (NGI0)
|
c084ebd77a |
tcp: socket option to check for MPTCP fallback to TCP
A way for an application to know if an MPTCP connection fell back to TCP is to use getsockopt(MPTCP_INFO) and look for errors. The issue with this technique is that the same errors -- EOPNOTSUPP (IPv4) and ENOPROTOOPT (IPv6) -- are returned if there was a fallback, *or* if the kernel doesn't support this socket option. The userspace then has to look at the kernel version to understand what the errors mean. It is not clean, and it doesn't take into account older kernels where the socket option has been backported. A cleaner way would be to expose this info to the TCP socket level. In case of MPTCP socket where no fallback happened, the socket options for the TCP level will be handled in MPTCP code, in mptcp_getsockopt_sol_tcp(). If not, that will be in TCP code, in do_tcp_getsockopt(). So MPTCP simply has to set the value 1, while TCP has to set 0. If the socket option is not supported, one of these two errors will be reported: - EOPNOTSUPP (95 - Operation not supported) for MPTCP sockets - ENOPROTOOPT (92 - Protocol not available) for TCP sockets, e.g. on the socket received after an 'accept()', when the client didn't request to use MPTCP: this socket will be a TCP one, even if the listen socket was an MPTCP one. With this new option, the kernel can return a clear answer to both "Is this kernel new enough to tell me the fallback status?" and "If it is new enough, is it currently a TCP or MPTCP socket?" questions, while not breaking the previous method. Acked-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240509-upstream-net-next-20240509-mptcp-tcp_is_mptcp-v1-1-f846df999202@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Richard Gobert
|
4b0ebbca3e |
net: gro: move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment
{inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
iph->id, ...) against all packets in a loop. These flush checks are used in
all merging UDP and TCP flows.
These checks need to be done only once and only against the found p skb,
since they only affect flush and not same_flow.
This patch leverages correct network header offsets from the cb for both
outer and inner network headers - allowing these checks to be done only
once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
more declarative and contained in inet_gro_flush, thus removing the need
for flush_id in napi_gro_cb.
This results in less parsing code for non-loop flush tests for TCP and UDP
flows.
To make sure results are not within noise range - I've made netfilter drop
all TCP packets, and measured CPU performance in GRO (in this case GRO is
responsible for about 50% of the CPU utilization).
perf top while replaying 64 parallel IP/TCP streams merging in GRO:
(gro_receive_network_flush is compiled inline to tcp_gro_receive)
net-next:
6.94% [kernel] [k] inet_gro_receive
3.02% [kernel] [k] tcp_gro_receive
patch applied:
4.27% [kernel] [k] tcp_gro_receive
4.22% [kernel] [k] inet_gro_receive
perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
results for any encapsulation, in this case inet_gro_receive is top
offender in net-next)
net-next:
10.09% [kernel] [k] inet_gro_receive
2.08% [kernel] [k] tcp_gro_receive
patch applied:
6.97% [kernel] [k] inet_gro_receive
3.68% [kernel] [k] tcp_gro_receive
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240509190819.2985-3-richardbgobert@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Richard Gobert
|
186b1ea73a |
net: gro: use cb instead of skb->network_header
This patch converts references of skb->network_header to napi_gro_cb's network_offset and inner_network_offset. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240509190819.2985-2-richardbgobert@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
1af7f88af2 |
inet: fix inet_fill_ifaddr() flags truncation
I missed that (struct ifaddrmsg)->ifa_flags was only 8bits,
while (struct in_ifaddr)->ifa_flags is 32bits.
Use a temporary 32bit variable as I did in set_ifa_lifetime()
and check_lifetime().
Fixes:
|
||
|
Jakub Kicinski
|
c85e41bfe7 |
netfilter pull request 24-05-12
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmZA578ACgkQ1V2XiooU IOS18g//Zyuv+23GcUM7+FEXrlMN658xJyWiYvKjOaZZx5ZiV0QdZc4cbfPFD44p qZBMmVC/WVoC89SLdwH1W47KoJU0xsK3/OdqGHHeNJ69111wIQMpOLfAetS2K0mb F+Ue2vyWg1GQDICGsCdenHX7ihtVvnJJkomxc+3ObxtLCNsb2Dsr6JM5hMVP5Bil 4UZnPsrgfWy3A8O92burlPVE1sTWDFfFUGIf8geJc4QadwkgufkzxMhXNO7xHlpG EZ99s8FPyD3R6tRPjf4gwdjr7JjinrdrYjZDuS4d3Uv8pKlUqcx8PgXG51/unr/y qlynLXtEc1QU6SO2jENosHAG2/LQG2zsYEiiLFCP+a1JOtOxevZQKx8MyAFW8xDX +RQhcBpTBocIyJ/tCDoM9lp69iYTR196Ct48v6pSGMNhZcddT4K4BkUL47GEs8T3 IA5x8h5gV2Q9ECMgqSaycdUsfLNgE/6fWx0ROs/wo3tMsgWrXCSJi8RFtN1sNbIO rfuNnQiETIFBkQxBi7um8jadxdfIHm65cjgZBCyVbNNml3JwjYvXLxCXt2G7LxC4 Sg4nZvIbqWIifoMc1aQKypvFZjzzsWtFmYCuEUVLrnpj2SFTyh5CNzNo3MlHf7LG sRb/XubdY6e0spLzd5VDjwH5qOT3poWAccatRr5BVUarxXCD5Vs= =RD9p -----END PGP SIGNATURE----- Merge tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
383eed2de5 |
tcp: get rid of twsk_unique()
DCCP is going away soon, and had no twsk_unique() method. We can directly call tcp_twsk_unique() for TCP sockets. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240507164140.940547-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
e7073830cc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c |
||
Peilin He
|
db3efdcf70 |
net/ipv4: add tracepoint for icmp_send
Introduce a tracepoint for icmp_send, which can help users to get more
detail information conveniently when icmp abnormal events happen.
1. Giving an usecase example:
=============================
When an application experiences packet loss due to an unreachable UDP
destination port, the kernel will send an exception message through the
icmp_send function. By adding a trace point for icmp_send, developers or
system administrators can obtain detailed information about the UDP
packet loss, including the type, code, source address, destination address,
source port, and destination port. This facilitates the trouble-shooting
of UDP packet loss issues especially for those network-service
applications.
2. Operation Instructions:
==========================
Switch to the tracing directory.
cd /sys/kernel/tracing
Filter for destination port unreachable.
echo "type==3 && code==3" > events/icmp/icmp_send/filter
Enable trace event.
echo 1 > events/icmp/icmp_send/enable
3. Result View:
================
udp_client_erro-11370 [002] ...s.12 124.728002:
icmp_send: icmp_send: type=3, code=3.
From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
skbaddr=00000000589b167a
Signed-off-by: Peilin He <he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Liu Chun <liu.chun2@zte.com.cn>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Eric Dumazet
|
1eb2cded45 |
net: annotate writes on dev->mtu from ndo_change_mtu()
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit
|
||
|
Eric Dumazet
|
9cf621bd5f |
rtnetlink: allow rtnl_fill_link_netnsid() to run under RCU protection
We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. All rtnl_link_ops->get_link_net() methods already using dev_net() are ready. I added READ_ONCE() annotations on others. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jakub Kicinski
|
179a6f5df8 |
ipsec-next-2024-05-03
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmY0mEIACgkQrB3Eaf9P W7fU7g//bQyydwei/4Vo+cNCPp82k8wL/qhDY3IjN10PfJOSNmeCAcSgkuuHTRSx g/hoxZEVzLrQT5bt+Sb38JxADFiL787GjdGEUy1gzF7CnDKcGT5KnydYNjDqDVGt nOv9kAGfWIkMKdNqrhHifddPMWd+ZqvpUcFz5olvqIE2mpNgMwy2i3NID9bNAV31 v5AEvNINa1LKOhX9cEka8iPQXwp+I6yTLqyOd4VciOuFr8dPg0FQqFaYR+OtMsV0 kIxdGTVfmRWaNgq/Tsg4z/2rXEwmEjTWzAhNVGu8o8L3JozXOvbjIrDG7Ws6qB3V XTFl8ueRMk0UCTlY/QAfip5H7IlAo+H0FUBC45FNP1UhHeWisXT4D5rqAEqQTlZR bddtuueLZyKclFpXRNi+/8vdDrXhhEzeNINkc52Ef33rUTtZJR8bXrEUKzaYCIuF ldub0PA3+e5wvwIxq5/Chc/+MIaIHnXBMUmbCJSPnMrupBQtO+i6arPQcbtaBAgS YyVGTRk9YN0UAjSriIuiViLlgUCMsvsWgfSz9rd0PE54MFBrvcLPeCtPxKZ+sTVG Y2iSZ8d3ThvsMiQVNU8gj3SlTY1oTvuaijDDGjnR0nWkxV9LMJHCPKfIzsbOKLJe +ee5hKP4TOFygnV58BkqdGK/LavNpouTIbrM43hgmJ0IX9kSt4o= =QiGZ -----END PGP SIGNATURE----- Merge tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2024-05-03 1) Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support. This was defined by an early version of an IETF draft that did not make it to a standard. 2) Introduce direction attribute for xfrm states. xfrm states have a direction, a stsate can be used either for input or output packet processing. Add a direction to xfrm states to make it clear for what a xfrm state is used. * tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Restrict SA direction attribute to specific netlink message types xfrm: Add dir validation to "in" data path lookup xfrm: Add dir validation to "out" data path lookup xfrm: Add Direction to the SA in or out udpencap: Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support ==================== Link: https://lore.kernel.org/r/20240503082732.2835810-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jason Xing
|
8edc27fc4f |
netfilter: use NF_DROP instead of -NF_DROP
At the beginning in 2009 one patch [1] introduced collecting drop counter in nf_conntrack_in() by returning -NF_DROP. Later, another patch [2] changed the return value of tcp_packet() which now is renamed to nf_conntrack_tcp_packet() from -NF_DROP to NF_DROP. As we can see, that -NF_DROP should be corrected. Similarly, there are other two points where the -NF_DROP is used. Well, as NF_DROP is equal to 0, inverting NF_DROP makes no sense as patch [2] said many years ago. [1] commit |
||
Felix Fietkau
|
c9d1d23e52 |
net: add heuristic for enabling TCP fraglist GRO
When forwarding TCP after GRO, software segmentation is very expensive, especially when the checksum needs to be recalculated. One case where that's currently unavoidable is when routing packets over PPPoE. Performance improves significantly when using fraglist GRO implemented in the same way as for UDP. When NETIF_F_GRO_FRAGLIST is enabled, perform a lookup for an established socket in the same netns as the receiving device. While this may not cover all relevant use cases in multi-netns configurations, it should be good enough for most configurations that need this. Here's a measurement of running 2 TCP streams through a MediaTek MT7622 device (2-core Cortex-A53), which runs NAT with flow offload enabled from one ethernet port to PPPoE on another ethernet port + cake qdisc set to 1Gbps. rx-gro-list off: 630 Mbit/s, CPU 35% idle rx-gro-list on: 770 Mbit/s, CPU 40% idle Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |