5c281b4e52
7003 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
6bfb56e93b |
cert host tools: Stop complaining about deprecated OpenSSL functions
OpenSSL 3.0 deprecated the OpenSSL's ENGINE API. That is as may be, but the kernel build host tools still use it. Disable the warning about deprecated declarations until somebody who cares fixes it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
44688ffd11 |
A set of objtool fixes:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn.
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent escape
from non-instrumentable regions.
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions.
- Mark a few tiny inline as __always_inline to prevent GCC from bringing
them out of line and instrumenting them.
- Mark the empty stub context_tracking_enabled() as always inline as GCC
brings them out of line and instruments the empty shell.
- Annotate ex_handler_msr_mce() as dead end
-----BEGIN PGP SIGNATURE-----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=eNVp
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
|
||
|
Linus Torvalds
|
71e80720db |
Kbuild updates for v5.19 (2nd)
- Fix build regressions for parisc, csky, nios2, openrisc - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT - Remove arch/parisc/nm, which was presumably a workaround for old tools - Check the odd combination of EXPORT_SYMBOL and 'static' precisely - Make external module builds robust against "too long argument error" - Support j, k keys for moving the cursor in nconfig -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmKbzrkVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsG4pEP/Ra691JLoNI8FdENI41mkv4gVBCP b3/7t/maaBpp9vEjoY3fSHwPTilBCFuSt50+QHvJDR2mckyFo6Vd4JLS7c3gfJkm JIyGodXYDE4RMQVZWjfjS2bTr7fnGOm9CxYgeJK4Js4dGeVhNN9OsWqmmoKKAtXt P9YL5jKTEPRO2IKdx38d3InJeufG6AsrbRe88H9XXy6gR6g49ZWKe8QB+VcNehm5 ZknWE+qLAmiXBGgsjwofOVU09wGuh8izf4/B+0S+HSvc1H3hdizYp+wVvBdwZ6co 3iqwh2fFZKMfL6n8pnmvf3Hl65SWMm40f9HmpScnErUUTUoEvHv53kvGp0d5m219 aRtbFF8HyVrvDmlR7GaaeiQja5Q1bT2ayjcmlVcNZ+gfvDId1nqqXO5SxBFn44hR e8KCOiGTOFswxV0vJLpUQrFuYkS8mvhm7NdaOZRYcvxnKHbN6ToKo6LS57j2Os5L bWFiNyk/oIUxN+9Lba0TqFbVuZazLBkNAjNsCalvosKIVXsZiFqOAdDytiUbCZmn vUvEe99Tr0ozRlAwZQtvLrL5Jdaxn9tv9ZDW8JRr3Xxku5wQN244+BOJBJV27wWw 0SkElgA979wJtMfwa/hm2WgSIxX6DESUaX6jzpi0hFNDLDUL25Kua8NeU/Z9UNrF 9tTys21exuDtjwy4 =BaLT -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - Fix build regressions for parisc, csky, nios2, openrisc - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT - Remove arch/parisc/nm, which was presumably a workaround for old tools - Check the odd combination of EXPORT_SYMBOL and 'static' precisely - Make external module builds robust against "too long argument error" - Support j, k keys for moving the cursor in nconfig * tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: Allow to select bash in a modified environment scripts: kconfig: nconf: make nconfig accept jk keybindings modpost: use fnmatch() to simplify match() modpost: simplify mod->name allocation kbuild: factor out the common objtool arguments kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o kbuild: clean .tmp_* pattern by make clean kbuild: remove redundant cleanups in scripts/link-vmlinux.sh kbuild: rebuild multi-object modules when objtool is updated kbuild: add cmd_and_savecmd macro kbuild: make *.mod rule robust against too long argument error kbuild: make built-in.a rule robust against too long argument error kbuild: check static EXPORT_SYMBOL* by script instead of modpost parisc: remove arch/parisc/nm kbuild: do not create *.prelink.o for Clang LTO or IBT kbuild: replace $(linked-object) with CONFIG options kbuild: do not try to parse *.cmd files for objects provided by compiler kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost modpost: squash if...else-if in find_elf_symbol2() modpost: reuse ARRAY_SIZE() macro for section_mismatch() ... |
||
Schspa Shi
|
42ce60aa5a |
kbuild: Allow to select bash in a modified environment
This fixes the build error when the system has a default bash version which is too old to support associative array variables. The build error log as fellowing: linux/scripts/check-local-export: line 11: declare: -A: invalid option declare: usage: declare [-afFirtx] [-p] [name[=value] ...] Signed-off-by: Schspa Shi <schspa@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Isak Ellmer
|
2bbb486162 |
scripts: kconfig: nconf: make nconfig accept jk keybindings
Make nconfig accept jk keybindings for movement in addition to arrow keys. Signed-off-by: Isak Ellmer <isak01@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Masahiro Yamada
|
a89227d769 |
modpost: use fnmatch() to simplify match()
Replace the own implementation for wildcard (glob) matching with a function call to fnmatch(). Also, change the return type to 'bool'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Masahiro Yamada
|
8c9ce89c5b |
modpost: simplify mod->name allocation
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
||
|
Masahiro Yamada
|
b42d230650 |
kbuild: factor out the common objtool arguments
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups for the objtool arguments. It was difficult to factor out them because all the vmlinux build rules were written in a shell script. It is somewhat tedious to touch the two files every time a new objtool option is supported. To reduce the code duplication, move the objtool for vmlinux.o into scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib so they are shared between Makefile.build and Makefile.vmlinux_o. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |
||
|
Masahiro Yamada
|
5d45950dfb |
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
This is a preparation for moving the objtool rule in the next commit. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |
||
|
Masahiro Yamada
|
b0d6207bad |
kbuild: clean .tmp_* pattern by make clean
Change the "make clean" rule to remove all the .tmp_* files. .tmp_objdiff is the only exception, which should be removed by "make mrproper". Rename the record directory of objdiff, .tmp_objdiff to .objdiff to avoid the removal by "make clean". Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |
||
|
Linus Torvalds
|
c6f2f3e2c8 |
Add partial Loongarch architecture code
This is the majority of the loongarch architecture code, including
the final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so
it is currently impossible to boot the kernel, until the
loongarch specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the
PCI subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI
for the libc ports to build on, and to help any treewide changes
in the mainline kernel get applied here as well. A gcc-12 based
tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/.
Original description from Huacai Chen at
https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
-----BEGIN PGP SIGNATURE-----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=hkwN
-----END PGP SIGNATURE-----
Merge tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
|
||
|
Linus Torvalds
|
500a434fc5 |
Driver core changes for 5.19-rc1
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
||
|
Linus Torvalds
|
6f9b5ed8ca |
Char / Misc / Other smaller driver subsystem updates for 5.19-rc1
Here is the large set of char, misc, and other driver subsystem updates for 5.19-rc1. The merge request for this has been delayed as I wanted to get lots of linux-next testing due to some late arrivals of changes for the habannalabs driver. Highlights of this merge are: - habanalabs driver updates for new hardware types and fixes and other updates - IIO driver tree merge which includes loads of new IIO drivers and cleanups and additions - PHY driver tree merge with new drivers and small updates to existing ones - interconnect driver tree merge with fixes and updates - soundwire driver tree merge with some small fixes - coresight driver tree merge with small fixes and updates - mhi bus driver tree merge with lots of updates and new device support - firmware driver updates - fpga driver updates - lkdtm driver updates (with a merge conflict, more on that below) - extcon driver tree merge with small updates - lots of other tiny driver updates and fixes and cleanups, full details in the shortlog. All of these have been in linux-next for almost 2 weeks with no reported problems. Note, there are 3 merge conflicts when merging this with your tree: - MAINTAINERS, should be easy to resolve - drivers/slimbus/qcom-ctrl.c, should be straightforward resolution - drivers/misc/lkdtm/stackleak.c, not an easy resolution. This has been noted in the linux-next tree for a while, and resolved there, here's a link to the resolution that Stephen came up with and that Kees says is correct: https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au I will be glad to provide a merge point that contains these resolutions if that makes things any easier for you. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8 P/gumbLEpFvoBZ5xLIW8 =KCgk -----END PGP SIGNATURE----- Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / other smaller driver subsystem updates from Greg KH: "Here is the large set of char, misc, and other driver subsystem updates for 5.19-rc1. The merge request for this has been delayed as I wanted to get lots of linux-next testing due to some late arrivals of changes for the habannalabs driver. Highlights of this merge are: - habanalabs driver updates for new hardware types and fixes and other updates - IIO driver tree merge which includes loads of new IIO drivers and cleanups and additions - PHY driver tree merge with new drivers and small updates to existing ones - interconnect driver tree merge with fixes and updates - soundwire driver tree merge with some small fixes - coresight driver tree merge with small fixes and updates - mhi bus driver tree merge with lots of updates and new device support - firmware driver updates - fpga driver updates - lkdtm driver updates (with a merge conflict, more on that below) - extcon driver tree merge with small updates - lots of other tiny driver updates and fixes and cleanups, full details in the shortlog. All of these have been in linux-next for almost 2 weeks with no reported problems" * tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits) habanalabs: use separate structure info for each error collect data habanalabs: fix missing handle shift during mmap habanalabs: remove hdev from hl_ctx_get args habanalabs: do MMU prefetch as deferred work habanalabs: order memory manager messages habanalabs: return -EFAULT on copy_to_user error habanalabs: use NULL for eventfd habanalabs: update firmware header habanalabs: add support for notification via eventfd habanalabs: add topic to memory manager buffer habanalabs: handle race in driver fini habanalabs: add device memory scrub ability through debugfs habanalabs: use unified memory manager for CB flow habanalabs: unified memory manager new code for CB flow habanalabs/gaudi: set arbitration timeout to a high value habanalabs: add put by handle method to memory manager habanalabs: hide memory manager page shift habanalabs: Add separate poll interval value for protocol habanalabs: use get_task_pid() to take PID habanalabs: add prefetch flag to the MAP operation ... |
||
|
Linus Torvalds
|
04d93b2b8b |
SPDX changes for 5.19-rc1
Here are some SPDX (i.e. licensing) changes for 5.19-rc1
The SPDX-labeling effort has started to pick up again, so here are some
changes for various parts of the tree that are related to this effort.
Included in here are:
- freevxfs license updates
- spihash.c license cleanups
- spdxcheck script updates to make things easier to work with
going forward
All of the license updates came from the original authors/copyright
holders of the code involved.
All of these have been in linux-next for weeks with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpngmg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl41wCgzt9M0/9hLjVV9UIW2l2phyJQZPQAoK7u0RUU
tYRRT2gSUwAHlu3khZSS
=fjdf
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX license marker changes.
The SPDX-labeling effort has started to pick up again, so here are
some changes for various parts of the tree that are related to this
effort.
Included in here are:
- freevxfs license updates
- spihash.c license cleanups
- spdxcheck script updates to make things easier to work with going
forward
All of the license updates came from the original authors/copyright
holders of the code involved.
All of these have been in linux-next for weeks with no reported
issues"
* tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
siphash: add SPDX tags as sole licensing authority
scripts/spdxcheck: Exclude top-level README
scripts/spdxcheck: Exclude MAINTAINERS/CREDITS
scripts/spdxcheck: Exclude config directories
scripts/spdxcheck: Put excluded files and directories into a separate file
scripts/spdxcheck: Add option to display files without SPDX
scripts/spdxcheck: Add [sub]directory statistics
scripts/spdxcheck: Add directory statistics
scripts/spdxcheck: Add percentage to statistics
freevxfs: relicense to GPLv2 only
|
||
Huacai Chen
|
fa96b57c14 |
LoongArch: Add build infrastructure
Add Kbuild, Makefile, Kconfig and link script for LoongArch build infrastructure. Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
08145b087e |
LoongArch: Add ELF-related definitions
Add ELF-related definitions for LoongArch, including: EM_LOONGARCH, KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64 and NT_LOONGARCH_*. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
50fd82b3a9 |
A handful of late-arriving documentation fixes and the addition of an SVG
tux logo which, I'm assured, we're going to want. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmKZLSEPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YvDgH/RKxfYbTZmNinh8Sk0hvQwfhJdp92J6UjElc csheqKyK7Qvm8Gv4OtpXABhmrE7LBNQK9CU4EzqgW1t3vtA/syiYfpAQfjzSyEyG /RVFwd9XHJTBW+ZraYtDNrgmMPgDwQ6GFfDUzHKc2++Xn0Hj4jzeKgk9KiZu0JN3 MJOPY4mCnRWWQd0jceQPp3ZqBiZuHKC5rIwVfWQXuCP10NsQxc3dpXOqKePfFC5A SUDJN5S8GLPj25qqjHBe4+MyDf+lhXBbTSu2aAjYJkbFWTEY1TrA6DHX9LHCaQng s3HDbQwrk2DOx6Uaz2foBbDM6tIpzyF3iWVbSoSbqhpurRG94xM= =hhkL -----END PGP SIGNATURE----- Merge tag 'docs-5.19-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes and the addition of an SVG tux logo which, I'm assured, we're going to want" * tag 'docs-5.19-2' of git://git.lwn.net/linux: documentation: Format button_dev as a pointer. docs: add SVG version of the Linux logo docs: move Linux logo into a new `images` folder docs: blockdev: change title to match section content docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0 |
||
Miguel Ojeda
|
fae35da4ac |
docs: move Linux logo into a new images folder
Having assets in the top-level `Documentation` directory can make it harder to find the documents one needs, especially if we want to add more of them later on. Instead, create a new `images` folder inside it that is used to hold assets such as logos. In addition, update the reference in `scripts/spdxcheck-test.sh`. Link: https://lore.kernel.org/lkml/8735hicoy7.fsf@meer.lwn.net/ Suggested-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20220528153132.8636-1-ojeda@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Masahiro Yamada
|
a78b6afa99 |
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
These are cleaned by the top Makefile. vmlinux.o and .vmlinux.d matches the '*.[aios]' and '.*.d' patterns respectively. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |
||
|
Masahiro Yamada
|
f6b66ca4f3 |
kbuild: rebuild multi-object modules when objtool is updated
When CONFIG_LTO_CLANG or CONFIG_X86_KERNEL_IBT is enabled, objtool for multi-object modules is postponed until the objects are linked together. Make sure to re-run objtool and re-link multi-object modules when objtool is updated. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |
||
|
Masahiro Yamada
|
ebd191b38c |
kbuild: add cmd_and_savecmd macro
Separate out the command execution part of if_changed, as we did
for if_changed_dep.
This allows us to reuse it in if_changed_rule.
define rule_foo
$(call cmd_and_savecmd,foo)
$(call cmd,bar)
endef
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
||
|
Masahiro Yamada
|
c6031b1dbb |
kbuild: make *.mod rule robust against too long argument error
Like built-in.a, the command length of the *.mod rule scales with the depth of the directory times the number of objects in the Makefile. Add $(obj)/ by the shell command (awk) instead of by Make's builtin function. In-tree modules still have some room to the limit (ARG_MAX=2097152), but this is more future-proof for big modules in a deep directory. For example, you can build i915 as a module (CONFIG_DRM_I915=m) and compare drivers/gpu/drm/i915/.i915.mod.cmd with/without this commit. The issue is more critical for external modules because the M= path can be very long as Jeff Johnson reported before [1]. [1] https://lore.kernel.org/linux-kbuild/4c02050c4e95e4cb8cc04282695f8404@codeaurora.org/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |
||
|
Masahiro Yamada
|
cd968b97c4 |
kbuild: make built-in.a rule robust against too long argument error
Kbuild runs at the top of objtree instead of changing the working
directory to subdirectories. I think this design is nice overall but
some commands have a scalability issue.
The build command of built-in.a is one of them whose length scales with:
O(D * N)
Here, D is the length of the directory path (i.e. $(obj)/ prefix),
N is the number of objects in the Makefile, O() is the big O notation.
The deeper directory the Makefile directory is located, the more easily
it will hit the too long argument error.
We can make it better. Trim the $(obj)/ by Make's builtin function, and
restore it by a shell command (sed).
With this, the command length scales with:
O(D + N)
In-tree modules still have some room to the limit (ARG_MAX=2097152),
but this is more future-proof for big modules in a deep directory.
For example, you can build i915 as builtin (CONFIG_DRM_I915=y) and
compare drivers/gpu/drm/i915/.built-in.a.cmd with/without this commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
||
|
Masahiro Yamada
|
31cb50b559 |
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
The 'static' specifier and EXPORT_SYMBOL() are an odd combination. Commit |
||
|
Masahiro Yamada
|
c25e1c5582 |
kbuild: do not create *.prelink.o for Clang LTO or IBT
When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created
for each module. Also, objtool is postponed until LLVM IR is converted
to ELF.
CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until
objects are merged together.
This commit stops generating *.prelink.o, so the build flow will look
similar with/without LTO.
The following figures show how the LTO build currently works, and
how this commit is changing it.
Current build flow
==================
[1] single-object module
$(LD)
$(CC) +objtool $(LD)
foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko
(LLVM IR) (ELF) | (ELF)
|
foo.mod.o --/
(LLVM IR)
[2] multi-object module
$(LD)
$(CC) $(AR) +objtool $(LD)
foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko
| (archive) (ELF) | (ELF)
foo2.c -----> foo2.o --/ |
(LLVM IR) foo.mod.o --/
(LLVM IR)
One confusion is that foo.o in multi-object module is an archive
despite of its suffix.
New build flow
==============
[1] single-object module
Since there is only one object, there is no need to keep the LLVM IR.
Use $(CC)+$(LD) to generate an ELF object in one build rule. When LTO
is disabled, $(LD) is unneeded because $(CC) produces an ELF object.
$(CC)+$(LD)+objtool $(LD)
foo.c ----------------------------> foo.o ---------> foo.ko
(ELF) | (ELF)
|
foo.mod.o --/
(LLVM IR)
[2] multi-object module
Previously, $(AR) was used to combine LLVM IR files into an archive,
but there was no technical reason to do so. Use $(LD) to merge them
into a single ELF object.
$(LD)
$(CC) +objtool $(LD)
foo1.c ---------> foo1.o ---------> foo.o ---------> foo.ko
| (ELF) | (ELF)
foo2.c ---------> foo2.o ----/ |
(LLVM IR) foo.mod.o --/
(LLVM IR)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
||
|
Masahiro Yamada
|
0cfd90060d |
kbuild: replace $(linked-object) with CONFIG options
*.prelink.o is created when CONFIG_LTO_CLANG or CONFIG_X86_KERNEL_IBT is enabled. Replace $(linked-object) with $(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT) so you will get a quick idea of when the --link option is passed. No functional change is intended. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 |
||
|
Masahiro Yamada
|
0aa24a79ee |
kbuild: do not try to parse *.cmd files for objects provided by compiler
Guenter Roeck reported the build breakage for parisc and csky.
I confirmed nios2 and openrisc are broken as well.
The reason is that they borrow libgcc.a from the toolchains.
For example, see this line in arch/parisc/Makefile:
LIBGCC := $(shell $(CC) -print-libgcc-file-name)
Some objects in libgcc.a are linked to vmlinux.o, but they do not have
.*.cmd files.
Obviously, there is no EXPORT_SYMBOL in external objects. Ignore them.
(Most of the architectures import library code into the kernel tree.
Perhaps those 4 architectures can do similar, but I do not know how
challenging it is.)
Fixes:
|
||
|
Linus Torvalds
|
6f664045c8 |
Not a lot of material this cycle. Many singleton patches against various
subsystems. Most notably some maintenance work in ocfs2 and initramfs. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx xSZypNhj2n9f8FCYca/ZrZneBsTnAA8= =AJEO -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "The non-MM patch queue for this merge window. Not a lot of material this cycle. Many singleton patches against various subsystems. Most notably some maintenance work in ocfs2 and initramfs" * tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits) kcov: update pos before writing pc in trace function ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock fs/ntfs: remove redundant variable idx fat: remove time truncations in vfat_create/vfat_mkdir fat: report creation time in statx fat: ignore ctime updates, and keep ctime identical to mtime in memory fat: split fat_truncate_time() into separate functions MAINTAINERS: add Muchun as a memcg reviewer proc/sysctl: make protected_* world readable ia64: mca: drop redundant spinlock initialization tty: fix deadlock caused by calling printk() under tty_port->lock relay: remove redundant assignment to pointer buf fs/ntfs3: validate BOOT sectors_per_clusters lib/string_helpers: fix not adding strarray to device's resource list kernel/crash_core.c: remove redundant check of ck_cmdline ELF, uapi: fixup ELF_ST_TYPE definition ipc/mqueue: use get_tree_nodev() in mqueue_get_tree() ipc: update semtimedop() to use hrtimer ipc/sem: remove redundant assignments ... |
||
Josh Poimboeuf
|
5f3da8c085 |
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Allow an arch specify that it has objtool uaccess validation with CONFIG_HAVE_UACCESS_VALIDATION. For now, doing so unconditionally selects CONFIG_OBJTOOL. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/d393d5e2fe73aec6e8e41d5c24f4b6fe8583f2d8.1650384225.git.jpoimboe@redhat.com |
||
|
Masahiro Yamada
|
c9db188405 |
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
Similar cleanup to commit
|
||
|
Masahiro Yamada
|
68fef6704e |
modpost: squash if...else-if in find_elf_symbol2()
if ((addr - sym->st_value) < distance) {
distance = addr - sym->st_value;
near = sym;
} else if ((addr - sym->st_value) == distance) {
near = sym;
}
is equivalent to:
if (addr - sym->st_value <= distance) {
distance = addr - sym->st_value;
near = sym;
}
(The else-if block can overwrite 'distance' with the same value).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
||
|
Masahiro Yamada
|
c5c468dcc2 |
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
Move ARRAY_SIZE() from file2alias.c to modpost.h to reuse it in section_mismatch(). Also, move the variable 'check' inside the for-loop. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
||
|
Masahiro Yamada
|
76954527fe |
modpost: remove the unused argument of check_sec_ref()
check_sec_ref() does not use the first parameter 'mod'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
||
|
Masahiro Yamada
|
d6b732666a |
modpost: fix undefined behavior of is_arm_mapping_symbol()
The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.
strchr(3) says:
The strchr() and strrchr() functions return a pointer to the matched
character or NULL if the character is not found. The terminating null
byte is considered part of the string, so that if c is specified as
'\0', these functions return a pointer to the terminator.
When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).
Test code
---------
char str1[] = "abc";
char str2[] = "ab";
strcpy(str1, "$");
strcpy(str2, "$");
printf("test1: %d\n", is_arm_mapping_symbol(str1));
printf("test2: %d\n", is_arm_mapping_symbol(str2));
Result
------
test1: 0
test2: 1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
||
Alexander Lobakin
|
b5beffa20d |
modpost: fix removing numeric suffixes
With the `-z unique-symbol` linker flag or any similar mechanism,
it is possible to trigger the following:
ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL
The reason is that for now the condition from remove_dot():
if (m && (s[n + m] == '.' || s[n + m] == 0))
which was designed to test if it's a dot or a '\0' after the suffix
is never satisfied.
This is due to that `s[n + m]` always points to the last digit of a
numeric suffix, not on the symbol next to it (from a custom debug
print added to modpost):
param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
So it's off-by-one and was like that since 2014.
Fix this for the sake of any potential upcoming features, but don't
bother stable-backporting, as it's well hidden -- apart from that
LD flag, it can be triggered only with GCC LTO which never landed
upstream.
Fixes:
|
||
Yuntao Wang
|
8d3a75078c |
scripts/kallsyms: update usage message of the kallsyms program
The kallsyms program supports --absolute-percpu option but does not display it in the usage message, fix it. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Jing Leng
|
23a0cb8e32 |
kbuild: Fix include path in scripts/Makefile.modpost
When building an external module, if users don't need to separate the compilation output and source code, they run the following command: "make -C $(LINUX_SRC_DIR) M=$(PWD)". At this point, "$(KBUILD_EXTMOD)" and "$(src)" are the same. If they need to separate them, they run "make -C $(KERNEL_SRC_DIR) O=$(KERNEL_OUT_DIR) M=$(OUT_DIR) src=$(PWD)". Before running the command, they need to copy "Kbuild" or "Makefile" to "$(OUT_DIR)" to prevent compilation failure. So the kernel should change the included path to avoid the copy operation. Signed-off-by: Jing Leng <jleng@ambarella.com> [masahiro: I do not think "M=$(OUT_DIR) src=$(PWD)" is the official way, but this patch is a nice clean up anyway.] Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
090b39af59 |
kernel hardening fix for v5.19-rc1
- Avoid GCC plugins needing utsrelease.h build target (Masahiro Yamada) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmKPnCQWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkPYD/oD5OvCR37Mr5ZUwxZ28U9pz1YO PjAYqS5D6n+pQvdda4hQM6Ac6Ei0wfHvmZKIorp5oWlOZypMD8QmrkvQIjHKqvCO vtwaPpFyV69JDC6vx2IJks/Btfi6ZV0YDtGUb9HNA56qCjjtTsXf9SduH0VtGcwb tK4uG4BJLPkLq9f3lsYtL025GL+tp7po0OwgKkl/6xbnE+l7/V0ddMdOV961b1zQ hYqqCy7tsdThwkpeil1WWvAuo3w0zYa4+LF3WJvYQpua+txtcH8dvwkt/xCa15Uq y5u9fkd2p5NDpj+Y1nhcGiOFPBdYvoI7zNvXH1MFZcSakyPuS159tya1OMIdV2RB FS2oDxbltZA6cn6a22SjIchjHrgm911aNpPhx3OWuuzDZ9lLv+iwKBE+kIJPPCZx IfbatVColopOVXfQ/DpDlPO/7dZPZVJJQrZsnL/6PwLR1EtKMnN5cgXgdstdObnk FEEP3Kx9tPX0EOiK1rc3ebXvhlYZyuO47lwnxjRiDrHjh9RPrnqTX1LgRl5WHKzQ hZnNQ63N/Si+07Q7mBrRyYKXpzMvB1BCzgHYXpTetviVfaFW2C97nvjd5O27JrqP ot37OjW+uogv+1/0NaT76ZZby36Vmr2yGqvA3Zgvdrk1JMpPT8wMys+ER8tVnzzD CwByXrQkmrCmmFm9OQ== =gF9H -----END PGP SIGNATURE----- Merge tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening fix from Kees Cook: "This fixes an unlucky build race condition when using the GCC plugins, noticed by a few folks. - Avoid GCC plugins needing utsrelease.h build target (Masahiro Yamada)" * tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: use KERNELVERSION for plugin version |
||
|
Linus Torvalds
|
bf9095424d |
S390:
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
||
|
Linus Torvalds
|
df202b452f |
Kbuild updates for v5.19
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
-----BEGIN PGP SIGNATURE-----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=Y2TB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
||
|
Linus Torvalds
|
16477cdfef |
asm-generic changes for 5.19
The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
|
||
|
Linus Torvalds
|
e908305fb2 |
Add new functions to alloc check for 5.19-rc1
Hi Linus, Please, pull the following patch that adds new alloc functions to alloc with multiplies check. kvmalloc() and kvzalloc() functions have now 2-factor multiplication argument forms kvmalloc_array() and kvcalloc(). Add alloc-with-multiplies checks for these new functions. Thanks -- Gustavo -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmKNTl0ACgkQRwW0y0cG 2zGnUhAAvLObUf0kxjbDNgURUndZUOLn7Kb/Y+9xC7YRSZYgBFqeKx1OojC5YCjY S55H/lCtrqveI02ACL5DTteNOZiTTzPezQx8bLvg4MOPWmqcii3acYinnR8Kj5cG OKsGTXxFN6SAMo5Z8pb5nwinGWRuYF3N6DSo8J6KKRVdNwQCjjLBduwfm4dJ/r06 zRa8yHlZpXI8iIouGe25rLHTyzTitaCvmockOgYKTwC9Wh8JqXeyWKFdZFdK1Xai KpfblQw5fL25WPf6h06oLppB1XlR5dOO6KCdnyQPuAm7j3V2TNJTNh3VAOMIUYWH NydmhqCWhPov86z4OWIsHDYk6tdQiBhV1VV2f/WC6eDHOkPVFUc3Z6sdSNbCnU46 HGmmc+00Bea67eepyh7SA6wrm8N1+2G8w/7sTGxukc77l1UmeNgNYPXsC3qYuauR dyLJnkgpsqC7/Vdufxw8p4qsEy4aDIM5kthQXFN4M2hvg8DQojdGMPPxeh1lZ+Hl q1KjMNkjdN1eNmBmfXsuGBkKmOlgHxcFe/y8NrYSwXBGrPy2bPjuUYHHnN1pMXqF MgvA5UwpeHSZlBDb/pPGKaZjjZ30BKqCALN98bwyqb4WMU+LWRH08GOrzJEbwlad pHfWhUzl5N6x5aG0Ai6czKedr+KtFBbR8xP5nRYWhygih3uSAH0= =SMOU -----END PGP SIGNATURE----- Merge tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull checkpatch update from Gustavo Silva: "kvmalloc() and kvzalloc() functions have now 2-factor multiplication argument forms kvmalloc_array() and kvcalloc(). Add alloc-with-multiplies checks for these new functions" * tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: checkpatch: add new alloc functions to alloc with multiplies check |
||
|
Linus Torvalds
|
7e062cda7d |
Networking changes for 5.19.
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmKNMPQACgkQMUZtbf5S
IrsRARAAuDyYs6jFYB3p+xazZdOnbF4iAgVv71+DQGvmsCl6CB9OrsNZMlvE85OL
Q3gjcRbgjrkN4lhgI8DmiGYbsUJnAvVjFdNjccz1Z/vTLYvuIM0ol54MUp5S+9WY
StncOJkOGJxxR/Gi5gzVmejPDsysU3Jik+hm/fpIcz8pybXxAsFKU5waY5qfl+/T
TZepfV0VCfqRDjqcF1qA5+jJZNU8pdodQlZ1+mh8bwu6Jk1ZkWkj6Ov8MWdwQldr
LnPeK/9hIGzkdJYHZfajxA3t8D0K5CHzSuih2bJ9ry8ZXgVBkXEThew778/R5izW
uB0YZs9COFlrIP7XHjtRTy/2xHOdYIPlj2nWhVdfuQDX8Crvt4VRN6EZ1rjko1ZJ
WanfG6WHF8NH5pXBRQbh3kIMKBnYn6OIzuCfCQSqd+niHcxFIM4vRiggeXI5C5TW
vJgEWfK6X+NfDiFVa3xyCrEmp5ieA/pNecpwd8rVkql+MtFAAw4vfsotLKOJEAru
J/XL6UE+YuLqIJV9ACZ9x1AFXXAo661jOxBunOo4VXhXVzWS9lYYz5r5ryIkgT/8
/Fr0zjANJWgfIuNdIBtYfQ4qG+LozGq038VA06RhFUAZ5tF9DzhqJs2Q2AFuWWBC
ewCePJVqo1j2Ceq2mGonXRt47OEnlePoOxTk9W+cKZb7ZWE+zEo=
=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
||
|
Linus Torvalds
|
7cf6a8a17f |
tpmdd updates for v5.19-rc1
- Strictened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> -----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYoux6xIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9LTQgEA4zRrlmLPjhZ1iZpPZiyBBv5eOx20/c+y R7tCfJFB2+ABAOT1E885vt+GgKTY4mYloHJ+ZtnTIf1QRMP6EoSX+TwP =oBOO -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: - Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. * tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: MAINTAINERS: add KEYS-TRUSTED-CAAM doc: trusted-encrypted: describe new CAAM trust source KEYS: trusted: Introduce support for NXP CAAM-based trusted keys crypto: caam - add in-kernel interface for blob generator crypto: caam - determine whether CAAM supports blob encap/decap KEYS: trusted: allow use of kernel RNG for key material KEYS: trusted: allow use of TEE as backend without TCG_TPM support tpm: Add field upgrade mode support for Infineon TPM2 modules tpm: Fix buffer access in tpm2_get_tpm_pt() char: tpm: cr50_i2c: Suppress duplicated error message in .remove() tpm: cr50: Add new device/vendor ID 0x504a6666 tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe() tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions certs: Explain the rationale to call panic() certs: Allow root user to append signed hashes to the blacklist keyring certs: Check that builtin blacklist hashes are valid certs: Make blacklist_vet_description() more strict certs: Factor out the blacklist hash creation tools/certs: Add print-cert-tbs-hash.sh |
||
|
Linus Torvalds
|
efd1df1982 |
selinux/stable-5.19 PR 20220523
-----BEGIN PGP SIGNATURE-----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=1ZFj
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got twelve patches queued for v5.19, with most being fairly
minor. The highlights are below:
- The checkreqprot and runtime disable knobs have been deprecated for
some time with no active users that we can find. In an effort to
move things along we are adding a pause when the knobs are used to
help make the deprecation more noticeable in case anyone is still
using these hacks in the shadows.
- We've added the anonymous inode class name to the AVC audit records
when anonymous inodes are involved. This should make writing policy
easier when anonymous inodes are involved.
- More constification work. This is fairly straightforward and the
source of most of the diffstat.
- The usual minor cleanups: remove unnecessary assignments, assorted
style/checkpatch fixes, kdoc fixes, macro while-loop
encapsulations, #include tweaks, etc"
* tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: declare member holding string literal const
selinux: log anon inode class name
selinux: declare data arrays const
selinux: fix indentation level of mls_ops block
selinux: include necessary headers in headers
selinux: avoid extra semicolon
selinux: update parameter documentation
selinux: resolve checkpatch errors
selinux: don't sleep when CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is true
selinux: checkreqprot is deprecated, add some ssleep() discomfort
selinux: runtime disable is deprecated, add some ssleep() discomfort
selinux: Remove redundant assignments
|
||
|
Linus Torvalds
|
0bf13a8436 |
kernel-hardening updates for v5.19-rc1
- usercopy hardening expanded to check other allocation types (Matthew Wilcox, Yuanzheng Song) - arm64 stackleak behavioral improvements (Mark Rutland) - arm64 CFI code gen improvement (Sami Tolvanen) - LoadPin LSM block dev API adjustment (Christoph Hellwig) - Clang randstruct support (Bill Wendling, Kees Cook) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmKL1kMWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlz6D/9lYEwDQYwKVK6fsXdgcs/eUkqc P06KGm7jDiYiua34LMpgu35wkRcxVDzB92kzQmt7yaVqhlIGjO9wnP+uZrq8q/LS X9FSb457fREg0XLPX5XC60abHYyikvgJMf06dSLaBcRq1Wzqwp5JZPpLZJUAM2ab rM1Vq0brfF1+lPAPECx1sYYNksP9XTw0dtzUu8D9tlTQDFAhKYhV6Io5yRFkA4JH ELSHjJHlNgLYeZE5IfWHRQBb+yofjnt61IwoVkqa5lSfoyvKpBPF5G+3gOgtdkyv A8So2aG/bMNUUY80Th5ojiZ6V7z5SYjUmHRil6I/swAdkc825n2wM+AQqsxv6U4I VvGz3cxaKklERw5N+EJw4amivcgm1jEppZ7qCx9ysLwVg/LI050qhv/T10TYPmOX 0sQEpZvbKuqGb6nzWo6DME8OpZ27yIa/oRzBHdkIkfkEefYlKWS+dfvWb/73cltj jx066Znk1hHZWGT48EsRmxdGAHn4kfIMcMgIs1ki1OO2II6LoXyaFJ0wSAYItxpz 5gCmDMjkGFRrtXXPEhi6kfKKpOuQux+BmpbVfEzox7Gnrf45sp92cYLncmpAsFB3 91nPa4/utqb/9ijFCIinazLdcUBPO8I1C8FOHDWSFCnNt4d3j2ozpLbrKWyQsm7+ RCGdcy+NU/FH1FwZlg== =nxsC -----END PGP SIGNATURE----- Merge tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: - usercopy hardening expanded to check other allocation types (Matthew Wilcox, Yuanzheng Song) - arm64 stackleak behavioral improvements (Mark Rutland) - arm64 CFI code gen improvement (Sami Tolvanen) - LoadPin LSM block dev API adjustment (Christoph Hellwig) - Clang randstruct support (Bill Wendling, Kees Cook) * tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (34 commits) loadpin: stop using bdevname mm: usercopy: move the virt_addr_valid() below the is_vmalloc_addr() gcc-plugins: randstruct: Remove cast exception handling af_unix: Silence randstruct GCC plugin warning niu: Silence randstruct warnings big_keys: Use struct for internal payload gcc-plugins: Change all version strings match kernel randomize_kstack: Improve docs on requirements/rationale lkdtm/stackleak: fix CONFIG_GCC_PLUGIN_STACKLEAK=n arm64: entry: use stackleak_erase_on_task_stack() stackleak: add on/off stack variants lkdtm/stackleak: check stack boundaries lkdtm/stackleak: prevent unexpected stack usage lkdtm/stackleak: rework boundary management lkdtm/stackleak: avoid spurious failure stackleak: rework poison scanning stackleak: rework stack high bound handling stackleak: clarify variable names stackleak: rework stack low bound handling stackleak: remove redundant check ... |
||
|
Linus Torvalds
|
22922deae1 |
Objtool changes for this cycle were:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to turn
them off. Some of them might be surprising. This makes objtool
tricky to use, and prevents porting individual features to other
arches.
- The config dependencies are too coarse-grained. Objtool enablement is
tied to CONFIG_STACK_VALIDATION, but it has several other features
independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is really
a subset of "orc", so it has all the same options. The subcmd model
has never really worked for objtool, as it only has a single purpose:
"do some combination of things on an object file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on 'readelf',
moving it away from 'nm', which doesn't handle multiple sections well,
which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt. object files
that don't have global symbols - which is rare but possible. Also fix a
bunch of symbol handling bugs found along the way.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
|
||
|
Linus Torvalds
|
2319be1356 |
Locking changes in this cycle were:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use it to
micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gaS5
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use
it to micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check
warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
* tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}
locking/atomic/x86: Introduce arch_try_cmpxchg64
locking/atomic: Add generic try_cmpxchg64 support
futex: Remove a PREEMPT_RT_FULL reference.
locking/qrwlock: Change "queue rwlock" to "queued rwlock"
lockdep: Delete local_irq_enable_in_hardirq()
locking/mutex: Make contention tracepoints more consistent wrt adaptive spinning
locking: Apply contention tracepoints in the slow path
locking: Add lock contention tracepoints
locking/rwsem: Always try to wake waiters in out_nolock path
locking/rwsem: Conditionally wake waiters in reader/writer slowpaths
locking/rwsem: No need to check for handoff bit if wait queue empty
lockdep: Fix -Wunused-parameter for _THIS_IP_
x86/mm: Force-inline __phys_addr_nodebug()
x86/kvm/svm: Force-inline GHCB accessors
task_stack, x86/cea: Force-inline stack helpers
|
||
|
Masahiro Yamada
|
d37aa2efc8 |
gcc-plugins: use KERNELVERSION for plugin version
Commit |
||
|
Masahiro Yamada
|
5ce2176b81 |
genksyms: adjust the output format to modpost
Make genksyms output symbol versions in the format modpost expects, so the 'sed' is unneeded. This commit makes *.symversions completely unneeded. I will keep *.symversions in .gitignore and 'make clean' for a while. Otherwise, 'git status' might be surprising. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) |