IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull RTC updates from Alexandre Belloni:
"A new driver this cycle is making the bulk of the changes and the
rx8010 driver has been rework to use the modern APIs.
Summary:
Subsystem:
- new generic DT properties: aux-voltage-chargeable,
trickle-voltage-millivolt
New driver:
- Microcrystal RV-3032
Drivers:
- ds1307: use aux-voltage-chargeable
- r9701, rx8010: modernization of the driver
- rv3028: fix clock output, trickle resistor values, RAM
configuration registers"
* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: r9701: set range
rtc: r9701: convert to devm_rtc_allocate_device
rtc: r9701: stop setting RWKCNT
rtc: r9701: remove useless memset
rtc: r9701: stop setting a default time
rtc: r9701: remove leftover comment
rtc: rv3032: Add a driver for Microcrystal RV-3032
dt-bindings: rtc: rv3032: add RV-3032 bindings
dt-bindings: rtc: add trickle-voltage-millivolt
rtc: rv3028: ensure ram configuration registers are saved
rtc: rv3028: factorize EERD bit handling
rtc: rv3028: fix trickle resistor values
rtc: rv3028: fix clock output support
rtc: mt6397: Remove unused member dev
rtc: rv8803: simplify the return expression of rv8803_nvram_write
rtc: meson: simplify the return expression of meson_vrtc_probe
rtc: rx8010: rename rx8010_init_client() to rx8010_init()
rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
rtc: ds1307: consider aux-voltage-chargeable
rtc: ds1307: store previous charge default per chip
...
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but
clk_set_rate may be called with the clock disabled. Ensure the clock is
kept disabled if it was not yet enabled.
Also, the actual rate was overwritten when enabling the clock, properly
write to the register only once.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
The ds1307 charger infrastructure now allows to add a rx8130 charger
setup that..
- does not depend on trickle-resistor-ohms
- does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS)
bits
- keeps previous no-charge behavior for device trees without
aux-voltage-chargeable
Make that happen.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-9-bst@pengutronix.de
Some RTC's batteries and supercaps were charged by default until now.
In contrast other RTCs allow charging but the driver did not configure
them to do so until now. These must not be charged by default to stay
backwards compatible.
In order to do that, store the charge default per chip.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-7-bst@pengutronix.de
DS13XX_TRICKLE_CHARGER_MAGIC sets the trickle-charge select (TCS) bits
(7..4). The datasheet of Maxim Integrated's DS1339 [1] for instance
reads:
"To prevent accidental enabling, only a pattern on 1010 enables the
trickle charger. All other patterns disable the trickle charger."
Since not all RTCs connected to a backup battery or supercap use these
bits DS13XX_TRICKLE_CHARGER_MAGIC should not get applied for all charger
setups unconditionally.
Epson's RX8130 is such an example: Instead of TCS bits "SMPTSEL1",
"SMPTSEL0", "CHGEN" and "INIEN" are expected as bit 7..4.
DS1339 and DS1340 are currently the only RTCs in the ds1307 driver that
apply DS13XX_TRICKLE_CHARGER_MAGIC to their setup register value. So
apply DS13XX_TRICKLE_CHARGER_MAGIC in do_trickle_setup_ds1339() which
is used by both RTCs.
[1] https://datasheets.maximintegrated.com/en/ds/DS1339-DS1339U.pdf
[2] https://support.epson.biz/td/api/doc_check.php?dl=app_RX8130CE
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-5-bst@pengutronix.de
The way the driver is implemented is buggy for the (admittedly unlikely)
use case where there are two RTCs with one having an interrupt configured
and the second not. This is caused by the fact that we use a global
rtc_class_ops struct which we modify depending on whether the irq number
is present or not.
Fix it by using two const ops structs with and without alarm operations.
While at it: not being able to request a configured interrupt is an error
so don't ignore it and bail out of probe().
Fixes: ed13d89b08 ("rtc: Add Epson RX8010SJ RTC driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
rs5c313_rtc_init() calls platform_driver_register(), and initializes the
hardware. This is wrong because of two reasons:
1. As soon as the driver has been registered, the device may be
probed. If devm_rtc_device_register() is called before hardware
initialization, reading the current time will fail:
rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error
rs5c313 rs5c313: registered as rtc0
rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error
rs5c313 rs5c313: hctosys: unable to read the hardware clock
2. If the platform device does not exist, the driver will still write
to a hardware device that may not be present.
Fix this by moving the hardware initialization sequence to the driver's
.probe() method.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814110731.29029-3-geert+renesas@glider.be
cmos_read_alarm() may leave certain fields of a struct rtc_wkalrm
untouched; therefore, these fields contain garbage if not properly
initialized, leading to inconsistent values when converting into
time64_t. This patch to zero initialize the struct before calling
cmos_read_alarm().
Note that this patch is not intended to produce a correct time64_t, it
is only to produce a consistent value. In the case of suspend/resume, a
correct time64_t is not necessary; a consistent value is sufficient to
correctly perform an equality test for t_current_expires and
t_saved_expires. Logic to deduce a correct time64_t is expensive and
hence should be avoided.
Signed-off-by: Victor Ding <victording@google.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814191654.v2.1.Iaf7638a2f2a87ff68d85fcb8dec615e41340c97f@changeid
Pull RTC updates from Alexandre Belloni:
"Not much this cycle - mostly non urgent driver fixes:
- ds1374: use watchdog core
- pcf2127: add alarm and pcf2129 support"
* tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: fix alarm handling
rtc: pcf2127: add alarm support
rtc: pcf2127: add pca2129 device id
rtc: max77686: Fix wake-ups for max77620
rtc: ds1307: provide an indication that the watchdog has fired
rtc: ds1374: remove unused define
rtc: ds1374: fix RTC_DRV_DS1374_WDT dependencies
rtc: cleanup obsolete comment about struct rtc_class_ops
rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable
rtc: ds1374: wdt: Use watchdog core for watchdog part
rtc: Replace HTTP links with HTTPS ones
rtc: goldfish: Enable interrupt in set_alarm() when necessary
rtc: max77686: Do not allow interrupt to fire before system resume
rtc: imxdi: fix trivial typos
rtc: cpcap: fix range
Fix multiple issues when handling alarms:
- Use threaded interrupt to avoid scheduling when atomic
- Stop matching on week day as it may not be set correctly
- Avoid parsing the DT interrupt and use what is provided by the i2c or
spi subsystem
- Avoid returning IRQ_NONE in case of error in the interrupt handler
- Never write WDTF as specified in the datasheet
- Set uie_unsupported, as for the pcf85063, setting alarms every seconds
is not working correctly and confuses the RTC.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200812085114.474903-1-alexandre.belloni@bootlin.com