IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This commit adds a "--gdb" parameter to kvm.sh, which causes
"CONFIG_DEBUG_INFO=y" to be added to the Kconfig options, "nokaslr"
to be added to the boot parameters, and "-s -S" to be added to the qemu
arguments. Furthermore, the scripting prints messages telling the user
how to start up gdb for the run in question.
Because of the interactive nature of gdb sessions, only one "--configs"
scenario is permitted when "--gdb" is specified. For most torture types,
this means that a "--configs" argument is required, and that argument
must specify the single scenario of interest.
The usual cautions about breakpoints and timing apply, for example,
staring at your gdb prompt for too long will likely get you many
complaints, including RCU CPU stall warnings. Omar Sandoval further
suggests using gdb's "hbreak" command instead of the "break" command on
systems supporting hardware breakpoints, and further using the "commands"
option because the resulting non-interactive breakpoints are less likely
to get you RCU CPU stall warnings.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a --help argument (along with its synonym -h) to display
the help text. While in the area, this commit also updates the help text.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the CONFIG_PROVE_RCU_LIST=y case is untested. This commit
therefore adds CONFIG_PROVE_RCU_LIST=y to rcutorture's TREE05 scenario.
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu-test-image.txt documentation covers a very uncommon case where
a real userspace environment is required. However, someone reading this
document might reasonably conclude that this is in fact a prerequisite.
In addition, the initrd.txt file mentions dracut, which is no longer used.
This commit therefore provides the needed updates.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of rcuperf with the kernel's perf
feature by renaming kernel/rcu/rcuperf.c to kernel/rcu/rcuscale.c, and
also by similarly renaming the functions and variables inside this file.
This has the side effect of changing the names of the kernel boot
parameters, so kernel-parameters.txt and ver_functions.sh are also
updated. The rcutorture --torture type was also updated from rcuperf
to rcuscale.
[ paulmck: Fix bugs located by Stephen Rothwell. ]
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, parse-torture.sh looks at the fifth field of torture-test
console output for the version number. This works fine for rcutorture,
but not for scftorture, which lacks the pointer field. This commit
therefore adjusts matching lines so that the parse-console.sh awk script
always sees the version number as the first field in the lines passed
to it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the dim distant past, qemu commands needed to be run from the
rcutorture directory, but this is no longer the case. This commit
therefore removes the now-useless "cd $KVM" from the kvm-test-1-run.sh
script.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the qemu command is constructed twice, once to dump it
to the qemu-cmd file and again to execute it. This is of course an
accident waiting to happen, but is done to ensure that the remainder
of the script has an accurate idea of the running qemu command's PID.
This commit therefore places both the qemu command and the PID capture
into a new temporary file and sources that temporary file. Thus the
single construction of the qemu command into the qemu-cmd file suffices
for both purposes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a script that transforms qemu-cmd files to allow them
and the corresponding kernels to be run in contexts other than the one
that they were created for, including on systems other than the one that
they were built on. For example, this allows the build products from a
--buildonly run to be transformed to allow distributed rcutorture testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Using --kcsan when the compiler does not support KCSAN results in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Clean KCSAN run in /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2020.06.16-09.53.16
This is a bit obtuse, so this commit adds checks resulting in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Compiler or architecture does not support KCSAN!
Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Currently, kvm-recheck.sh complains that qemu failed for --buildonly
runs, which is sort of true given that qemu can hardly succeed if not
invoked in the first place. Nevertheless, this commit swaps the order
of checks in kvm-recheck.sh so that --buildonly runs will be summarized
more straightforwardly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We need to pass the arguments provided to --kmake-arg to all make
invocations. In particular, the make invocations generating the configs
need to see the final make arguments, e.g. if config variables depend on
particular variables that are passed to make.
For example, when using '--kcsan --kmake-arg CC=clang-11', we would lose
CONFIG_KCSAN=y due to 'make oldconfig' not seeing that we want to use a
compiler that supports KCSAN.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit pulls the simple pattern-based error detection from the
console log into a new console-badness.sh file. This will enable future
commits to end a run on the first error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When bisecting RCU issues, it is often the case that the first error in
an unsuccessful run will happen quickly, but that a successful run must
go on for some time in order to obtain a sufficiently low false-negative
error rate. In many cases, a bisection requires multiple concurrent
runs, in which case the first failure in any run indicates failure,
pure and simple. In such cases, it would speed things up greatly if
the first failure terminated all runs.
This commit therefore adds scripting that checks for a file named "STOP"
in the top-level results directory, terminating the run when it appears.
Note that in-progress builds will continue until completion, but future
builds and all runs will be cut short.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
One reason to do a --buildonly run is to use the build products elsewhere,
for example, to do the actual test on some other system. Part of doing
the test is the actual qemu command, which is not currently produced
by --buildonly runs. This commit therefore causes --buildonly runs to
create this file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Leaving off the kvm.sh script's --cpus argument results in the script
testing the scenarios sequentially, which can be quite slow. However,
having to specify the actual number of CPUs can be error-prone.
This commit therefore adds a --allcpus argument that causes kvm.sh to
use all available CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The identify_qemu_vcpus bash function can return numbers including
whitespace characters, which can be a bit annoying in some bash
dollar-sign substitutions. This commit therefore strips all spaces and
tabs from the value that identify_qemu_vcpus outputs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current console parsing assumes that console lines containing "!!!"
are statistics lines from which it can parse the number of rcutorture
too-short grace-period failures. This prints confusing output for
other problems, including memory exhaustion. This commit therefore
differentiates between these cases and prints an appropriate error string.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture-test recheck logic fails to set the configfile variable to
the current scenario, so this commit properly initializes this variable.
This change isn't critical given that all errors for a given scenario
follow that scenario's heading, but it is easier on the eyes to repeat it.
And this repetition also prevents confusion as to whether a given message
goes with the previous heading or the next one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-check-branches.sh script that takes a list
of commits and commit ranges and runs a short rcutorture test on all
scenarios on each specified commit. A summary is printed at the end, and
the script returns success if all rcutorture runs completed without error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On some (probably misconfigured) systems, the torture-test scripting
will cause qemu to complain about missing EFI firmware, often because
qemu is trying to traverse broken symbolic links to find that firmware.
Which is a bit silly given that the default torture-test guest OS has
but a single binary for its userspace, and thus is unlikely to do much
in the way of networking in any case.
This commit therefore avoids such problems by specifying "-net none"
to qemu unless the TORTURE_QEMU_INTERACTIVE environment variable is set
(for example, by having specified "--interactive" to kvm.sh), in which
case "-net nic -net user" is specified to qemu instead. Either choice
may be overridden by specifying the "-net" argument of your choice to
the kvm.sh "--qemu-args" parameter.
Link: https://lore.kernel.org/lkml/20190701141403.GA246562@google.com
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
This commit renames the rcutorture config/refperf to config/refscale to
further avoid conflation with the Linux kernel's perf feature.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of refperf with the kernel's perf
feature by renaming kernel/rcu/refperf.c to kernel/rcu/refscale.c,
and also by similarly renaming the functions and variables inside
this file. This has the side effect of changing the names of the
kernel boot parameters, so kernel-parameters.txt and ver_functions.sh
are also updated.
The rcutorture --torture type remains refperf, and this will be
addressed in a separate commit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The old Kconfig option name is all too easy to conflate with the
unrelated "perf" feature, so this commit renames RCU_REF_PERF_TEST to
RCU_REF_SCALE_TEST.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, it is necessary to manually edit the console output to see
anything more than statistics, and sometimes the statistics can indicate
outliers that need more investigation. This commit therefore dumps out
the per-experiment measurements, sorted in ascending order, just before
dumping out the statistics.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The experiment-number column is currently labeled "Threads", which is
misleading at best. This commit therefore relabels it as "Runs", and
adjusts the scripts accordingly.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit updates the rcutorture scripting to include the new refperf
torture-test module.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
fixes.2020.04.27a: Miscellaneous fixes.
kfree_rcu.2020.04.27a: Changes related to kfree_rcu().
rcu-tasks.2020.04.27a: Addition of new RCU-tasks flavors.
stall.2020.04.27a: RCU CPU stall-warning updates.
torture.2020.05.07a: Torture-test updates.
Make it a bit easier to apply KASAN to rcutorture runs with a new --kasan
argument, again leveraging the config_override_param() bash function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by also using the bash
config_override_param() to set the initial list of Kconfig options from
the CFcommon file. While in the area, it makes this function capable of
update-in-place on the file containing the cumulative Kconfig options,
thus avoiding annoying changes when adding another source of options.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit applies config_override_param() to allow scenario-specific
Kconfig options to override those in CFcommon. This in turn will allow
additional Kconfig options to be placed in CFcommon, for example, an
option common to all but a few scenario can be placed in CFcommon and
then overridden in those few scenarios. Plus this change saves one
whole line of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, attempting to override a --kcsan default with a --kconfig
option might or might not work. However, it would be good to allow the
user to adjust the --kcsan defaults, for example, to specify a different
time for CONFIG_KCSAN_REPORT_ONCE_IN_MS. This commit therefore uses the
new config_override_param() bash function to apply the --kcsan defaults
and then apply the --kconfig options, which allows this overriding
to occur.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit introduces a config_override_param() bash function that
folds in an additional set of Kconfig options. This is initially applied
to fold in the --kconfig kvm.sh parameter, but later commits will also
apply it to the Kconfig options added by the --kcsan kvm.sh parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The #CHECK# directives that can be present in CFcommon and in the
rcutorture scenario Kconfig files are both copied to ConfigFragment
and grepped out of the two directive files and added to ConfigFragment.
This commit therefore removes the redundant "grep" commands and takes
advantage of the consequent opportunity to simplify redirection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The KCSAN tool emits a great many warnings for current kernels, for
example, a one-hour run of the full set of rcutorture scenarios results
in no fewer than 3252 such warnings, many of which are duplicates
or are otherwise closely related. This commit therefore introduces
a kcsan-collapse.sh script that maps these warnings down to a set of
function pairs (22 of them given the 3252 individual warnings), placing
the resulting list in decreasing order of frequency of occurrence into
a kcsan.sum file. If any KCSAN warnings were produced, the pathname of
this file is emitted at the end of the summary of the rcutorture runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the existing --kconfig argument can be used to run KCSAN for
an rcutorture test, it is not as straightforward as one might like:
--kconfig "CONFIG_DEBUG_INFO=y CONFIG_KCSAN=y \
CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n \
CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n \
CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000 \
CONFIG_KCSAN_VERBOSE=y CONFIG_KCSAN_INTERRUPT_WATCHER=y"
This commit therefore adds a "--kcsan" argument that emulates the above
--kconfig command. Note that if you specify a Kconfig option using
-kconfig that conflicts with one that --kcsan adds, you get whatever
the script and the build system decide to give you.
Cc: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The number of CPUs is tuned to allow "4*CFLIST TREE10" on a large system,
up from "3*CFLIST TREE10" previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
System hangs or killed rcutorture guest OSes can result in truncated
"Reader Pipe:" lines, which can in turn result in false-positive
reader-batch near-miss warnings. This commit therefore adjusts the
reader-batch checks to account for possible line truncation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a TRACE02 scenario which enables preemption and RCU
Tasks Trace IPIs, more specifically, disabling heavyweight readers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
