IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add a MODULE_DEVICE_TABLE() on all clocks that can be built as modules
to allow auto-load at boot.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-50-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to successfully build clock drivers as modules it is required
to declare a module license: add it where missing.
While at it, also change the MODULE_LICENSE text from "GPL v2" to
"GPL" (which means the same) on clk-mt7981-eth.c.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-38-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lots of clock drivers have got both .probe() and a .remove() callbacks:
switch from builtin_platform_driver() to module_platform_driver() so
that we actually register the .remove() callback.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-37-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add FHCTL parameters and register PLLs through FHCTL to add support
for frequency hopping and SSC. FHCTL will be enabled only on PLLs
specified in devicetree.
This commit brings functional changes only upon addition of
devicetree configuration.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230206100105.861720-8-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit e4c23e19aa ("clk: mediatek: Register clock gate with device")
introduces a helper function for the sole purpose of propagating a
struct device pointer to the clk API when registering the mtk-gate
clocks to take advantage of Runtime PM when/where needed and where
a power domain is defined in devicetree.
Function mtk_clk_register_gates() then becomes a wrapper around the
new mtk_clk_register_gates_with_dev() function that will simply pass
NULL as struct device: this is essential when registering drivers
with CLK_OF_DECLARE instead of as a platform device, as there will
be no struct device to pass... but we can as well simply have only
one function that always takes such pointer as a param and pass NULL
when unavoidable.
This commit removes the mtk_clk_register_gates() wrapper and renames
mtk_clk_register_gates_with_dev() to the former and all of the calls
to either of the two functions were fixed in all drivers in order to
reflect this change; also, to improve consistency with other kernel
functions, the pointer to struct device was moved as the first param.
Since a lot of MediaTek clock drivers are actually registering as a
platform device, but were still registering the mtk-gate clocks
without passing any struct device to the clock framework, they've
been changed to pass a valid one now, as to make all those platforms
able to use runtime power management where available.
While at it, some much needed indentation changes were also done.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230120092053.182923-4-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As part of the effort to improve the MediaTek clk drivers, the next step
is to switch from the old 'struct clk' clk prodivder APIs to the new
'struct clk_hw' ones.
Instead of adding new APIs to the MediaTek clk driver library mirroring
the existing ones, moving all drivers to the new APIs, and then removing
the old ones, just migrate everything at the same time. This involves
replacing 'struct clk' with 'struct clk_hw', and 'struct clk_onecell_data'
with 'struct clk_hw_onecell_data', and fixing up all usages.
For now, the clk_register() and co. usage is retained, with __clk_get_hw()
and (struct clk_hw *)->clk used to bridge the difference between the APIs.
These will be replaced in subsequent patches.
Fix up mtk_{alloc,free}_clk_data to use 'struct clk_hw' by hand. Fix up
all other affected call sites with the following coccinelle script.
// Replace type
@@
@@
- struct clk_onecell_data
+ struct clk_hw_onecell_data
// Replace of_clk_add_provider() & of_clk_src_simple_get()
@@
expression NP, DATA;
symbol of_clk_src_onecell_get;
@@
- of_clk_add_provider(
+ of_clk_add_hw_provider(
NP,
- of_clk_src_onecell_get,
+ of_clk_hw_onecell_get,
DATA
)
// Fix register/unregister
@@
identifier CD;
expression E;
identifier fn =~ "unregister";
@@
fn(...,
- CD->clks[E]
+ CD->hws[E]->clk
,...
);
// Fix calls to clk_prepare_enable()
@@
identifier CD;
expression E;
@@
clk_prepare_enable(
- CD->clks[E]
+ CD->hws[E]->clk
);
// Fix pointer assignment
@@
identifier CD;
identifier CLK;
expression E;
@@
- CD->clks[E]
+ CD->hws[E]
=
(
- CLK
+ __clk_get_hw(CLK)
|
ERR_PTR(...)
)
;
// Fix pointer usage
@@
identifier CD;
expression E;
@@
- CD->clks[E]
+ CD->hws[E]
// Fix mtk_clk_pll_get_base()
@@
symbol clk, hw, data;
@@
mtk_clk_pll_get_base(
- struct clk *clk,
+ struct clk_hw *hw,
const struct mtk_pll_data *data
) {
- struct clk_hw *hw = __clk_get_hw(clk);
...
}
// Fix mtk_clk_pll_get_base() usage
@@
identifier CD;
expression E;
@@
mtk_clk_pll_get_base(
- CD->clks[E]
+ CD->hws[E]->clk
,...
);
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220519071610.423372-4-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Until now the mediatek clk driver library did not have any way to
unregister clks, and so none of the drivers implemented remove
functions.
Now that the library does have APIs to unregister clks, use them
to implement remove functions for the mt8195 clk drivers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220208124034.414635-31-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Until now the mediatek clk driver library did not have any way to
unregister clks, and so all drivers did not do proper cleanup in
their error paths.
Now that the library does have APIs to unregister clks, use them
in the error path of the probe functions for the mt8195 clk drivers
to do proper cleanup.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220208124034.414635-30-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When the PLL type clk was implemented in the MediaTek clk driver
library, the data structure definitions and function declaration
were put in the common header file.
Since it is its own type of clk, and not all platform clk drivers
utilize it, having the definitions in the common header results
in wasted cycles during compilation.
Split out the related definitions and declarations into its own
header file, and include that only in the platform clk drivers that
need it.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-13-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
