IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This nolibc internal function is not used. Delete it. It was probably
supposed to handle memmove(), but today the memmove() has its own
implementation.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This allows nolic to work with `-nostdinc` avoiding any reliance on
system headers.
The implementation has been lifted from musl libc 1.2.4.
There is already an implementation of stdarg.h in include/linux/stdarg.h
but that is GPL licensed and therefore not suitable for nolibc.
The used compiler builtins have been validated to be at least available
since GCC 4.1.2 and clang 3.0.0.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The ABI mandates that the %esp register must be a multiple of 16 when
executing a 'call' instruction.
Commit 2ab446336b ("tools/nolibc: i386: shrink _start with _start_c")
simplified the _start function, but it didn't take care of the %esp
alignment, causing SIGSEGV on SSE and AVX programs that use aligned move
instruction (e.g., movdqa, movaps, and vmovdqa).
The 'and $-16, %esp' aligns the %esp at a multiple of 16. Then 'push
%eax' will subtract the %esp by 4; thus, it breaks the 16-byte
alignment. Make sure the %esp is correctly aligned after the push by
subtracting 12 before the push.
Extra:
Add 'add $12, %esp' before the 'and $-16, %esp' to avoid over-estimating
for particular cases as suggested by Willy.
A test program to validate the %esp alignment on _start can be found at:
https://lore.kernel.org/lkml/ZOoindMFj1UKqo+s@biznet-home.integral.gnuweeb.org
[ Thomas: trim Fixes tag commit id ]
Cc: Zhangjin Wu <falcon@tinylab.org>
Fixes: 2ab446336b ("tools/nolibc: i386: shrink _start with _start_c")
Reported-by: Nicholas Rosenberg <inori@vnlx.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----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=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
Having __sysret() as an inline function has the unfortunate effect of
adding casts and large constants comparisons after the syscall returns
that significantly inflate some light code that's otherwise syscall-
heavy. Even nolibc-test grew by ~1%.
Let's switch back to a macro for this, and use it only with signed
arguments. Note that it is also possible to design a slightly more
complex macro covering unsigned and pointers but we only have 3 such
syscalls so it is pointless, and these were just addressed not to use
this macro anymore. Now for the argument (the local variable containing
the syscall return value), any negative value is an error, that results
in -1 being returned and errno to be assigned the opposite value.
This may be revisited again in the future if really needed but for now
let's get back to something sane.
Fixes: 428905da6e ("tools/nolibc: sys.h: add a syscall return helper")
Link: https://lore.kernel.org/lkml/20230806095846.GB10627@1wt.eu/
Link: https://lore.kernel.org/lkml/ZNKOJY+g66nkIyvv@1wt.eu/
Cc: Zhangjin Wu <falcon@tinylab.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The __sysret() function causes some undesirable casts so we'll revert
it. In order to keep it simple it will now only support integer return
values like in the past, so we must basically revert the changes that
were made to these 3 syscalls which return a pointer so that they
simply rely on their own test and the SET_ERRNO() macro.
Fixes: 4201cfce15 ("tools/nolibc: clean up sbrk() routine")
Fixes: 924e9539ae ("tools/nolibc: clean up mmap() routine")
Fixes: d27447bc2e ("tools/nolibc: sys.h: apply __sysret() helper")
Link: https://lore.kernel.org/lkml/20230806095846.GB10627@1wt.eu/
Link: https://lore.kernel.org/lkml/ZNKOJY+g66nkIyvv@1wt.eu/
Cc: Zhangjin Wu <falcon@tinylab.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Silence the following warnings reported by the new -Wall -Wextra options
with pure assembly code.
In file included from sysroot/powerpc/include/stdio.h:13,
from nolibc-test.c:13:
sysroot/powerpc/include/arch.h: In function '_start':
sysroot/powerpc/include/arch.h:192:32: warning: unused variable 'r2' [-Wunused-variable]
192 | register volatile long r2 __asm__ ("r2") = (void *)&TOC - (void *)_start;
| ^~
sysroot/powerpc/include/arch.h:187:97: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
187 | void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void)
| ^~~~~~
Since only elfv2 ABI requires to save the TOC/GOT pointer to r2
register, when using elfv1 ABI, the old C code is simply ignored by the
compiler, but the compiler can not ignore the inline assembly code and
will introduce build failure or running segfaults. So, let's further
only add the new assembly code for elfv2 ABI with the checking of
_CALL_ELF == 2.
Link: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
Link: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This allows to generate smaller text/data/dec size.
As the _start_c() function added by crt.h, __stack_chk_init() is called
from _start_c() instead of the assembly _start. So, it is able to mark
it with static now.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This follows the 64-bit PowerPC ABI [1], refers to the slides: "A new
ABI for little-endian PowerPC64 Design & Implementation" [2] and the
musl code in arch/powerpc64/crt_arch.h.
First, stdu and clrrdi are used instead of stwu and clrrwi for
powerpc64.
Second, the stack frame size is increased to 32 bytes for powerpc64, 32
bytes is the minimal stack frame size supported described in [2].
Besides, the TOC pointer (GOT pointer) must be saved to r2.
This works on both little endian and big endian 64-bit PowerPC.
[1]: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
[2]: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Both syscall declarations and _start code definition are added for
powerpc to nolibc.
Like mips, powerpc uses a register (exactly, the summary overflow bit)
to record the error occurred, and uses another register to return the
value [1]. So, the return value of every syscall declaration must be
normalized to match the __sysret() helper, return -value when there is
an error, otheriwse, return value directly.
Glibc and musl use different methods to check the summary overflow bit,
glibc (sysdeps/unix/sysv/linux/powerpc/sysdep.h) saves the cr register
to r0 at first, and then check the summary overflow bit in cr0:
mfcr r0
r0 & (1 << 28) ? -r3 : r3
-->
10003c14: 7c 00 00 26 mfcr r0
10003c18: 74 09 10 00 andis. r9,r0,4096
10003c1c: 41 82 00 08 beq 0x10003c24
10003c20: 7c 63 00 d0 neg r3,r3
Musl (arch/powerpc/syscall_arch.h) directly checks the summary overflow
bit with the 'bns' instruction, it is smaller:
/* no summary overflow bit means no error, return value directly */
bns+ 1f
/* otherwise, return negated value */
neg r3, r3
1:
-->
10000418: 40 a3 00 08 bns 0x10000420
1000041c: 7c 63 00 d0 neg r3,r3
Like musl, Linux (arch/powerpc/include/asm/vdso/gettimeofday.h) uses the
same method for do_syscall_2() too.
Here applies the second method to get smaller size.
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Otherwise both gcc and clang may generate warnings about type
mismatches:
sysroot/mips/include/string.h:12:14: warning: mismatch in argument 1 type of built-in function 'malloc'; expected 'unsigned int' [-Wbuiltin-declaration-mismatch]
12 | static void *malloc(size_t len);
| ^~~~~~
The compiler provides __SIZE_TYPE__ as the type that corresponds to size_t
(typically "long unsigned int" or "unsigned int"). It was verified to be
available at least since gcc-3.4 and clang-3.8, so from now on we'll use
this definition for size_t.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20230805161929.GA15284@1wt.eu/
Signed-off-by: Willy Tarreau <w@1wt.eu>
getauxval() returns an unsigned long but the overall type of the ternary
operator needs to be signed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This warning will be enabled later so avoid triggering it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It's documented as returning int which is also implemented by glibc and
musl, so adopt that return type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
According to manual page [1], posix spec [2] and source code like
arch/mips/kernel/syscall.c, for historic reasons, the sys_pipe() syscall
on some architectures has an unusual calling convention. It returns
results in two registers which means there is no need for it to do
verify the validity of a userspace pointer argument. Historically that
used to be expensive in Linux. These days the performance advantage is
negligible.
Nolibc doesn't support the unusual calling convention above, luckily
Linux provides a generic sys_pipe2() with an additional flags argument
from 2.6.27. If flags is 0, then pipe2() is the same as pipe(). So here
we use sys_pipe2() to implement the pipe().
pipe2() is also provided to allow users to use flags argument on demand.
[1]: https://man7.org/linux/man-pages/man2/pipe.2.html
[2]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/pipe.html
Suggested-by: Zhangjin Wu <falcon@tinylab.org>
Link: https://lore.kernel.org/all/20230729100401.GA4577@1wt.eu/
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Add a minimal implementation of setvbuf(), which error checks the mode
argument (as required by spec) and returns. Since nolibc never buffers
output, nothing needs to be done.
The kselftest framework recently added a call to setvbuf(). As a result,
any tests that use the kselftest framework and nolibc cause a compiler
error due to missing function. This provides an urgent fix for the
problem which is preventing arm64 testing on linux-next.
Example:
clang --target=aarch64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-Werror=option-ignored -Werror=unused-command-line-argument
--target=aarch64-linux-gnu -fintegrated-as
-fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \
-include ../../../../include/nolibc/nolibc.h -I../..\
-static -ffreestanding -Wall za-fork.c
build/kselftest/arm64/fp/za-fork-asm.o
-o build/kselftest/arm64/fp/za-fork
In file included from <built-in>:1:
In file included from ./../../../../include/nolibc/nolibc.h:97:
In file included from ./../../../../include/nolibc/arch.h:25:
./../../../../include/nolibc/arch-aarch64.h:178:35: warning: unknown
attribute 'optimize' ignored [-Wunknown-attributes]
void __attribute__((weak,noreturn,optimize("omit-frame-pointer")))
__no_stack_protector _start(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from za-fork.c:12:
../../kselftest.h:123:2: error: call to undeclared function 'setvbuf';
ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
setvbuf(stdout, NULL, _IOLBF, 0);
^
../../kselftest.h:123:24: error: use of undeclared identifier '_IOLBF'
setvbuf(stdout, NULL, _IOLBF, 0);
^
1 warning and 2 errors generated.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYus3Z8r2cg3zLv8uH8MRrzLFVWdnor02SNr=rCz+_WGVg@mail.gmail.com/
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Also clean up the instructions in delayed slots.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As suggested by Thomas, It is able to move the stackprotector
initialization from the assembly _start to the beginning of the new
_start_c(). Let's call __stack_chk_init() in _start_c() as a
preparation.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/a00284a6-54b1-498c-92aa-44997fa78403@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Let's define an empty __stack_chk_init for the !_NOLIBC_STACKPROTECTOR
branch.
This allows to remove #ifdef around every call of __stack_chk_init().
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the environ and _auxv support added for nolibc, the assembly _start
function becomes more and more complex and therefore makes the porting
of nolibc to new architectures harder and harder.
To simplify portability, this C version of _start_c() is added to do
most of the assembly start operations in C, which reduces the complexity
a lot and will eventually simplify the porting of nolibc to the new
architectures.
The new _start_c() only requires a stack pointer argument, it will find
argc, argv, envp/environ and _auxv for us, and then call main(),
finally, it exit() with main's return status. With this new _start_c(),
the future new architectures only require to add very few assembly
instructions.
As suggested by Thomas, users may use a different signature of main
(e.g. void main(void)), a _nolibc_main alias is added for main to
silence the warning about potential conflicting types.
As suggested by Willy, the code is carefully polished for both smaller
size and better readability with local variables and the right types.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230715095729.GC24086@1wt.eu/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/90fdd255-32f4-4caf-90ff-06456b53dac3@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The statx manpage [1] shows that it has been supported from Linux 4.11
and glibc 2.28, the Linux support can be checked for all of the
architectures with this command:
$ git grep -r statx v4.11 arch/ include/uapi/asm-generic/unistd.h \
| grep -E "aarch64|arm|mips|s390|x86|:include/uapi"
Besides riscv and loongarch, all of the nolibc supported architectures
have added sys_statx from Linux v4.11. riscv is mainlined to v4.15,
loongarch is mainlined to v5.19, both of them use the generic unistd.h,
so, they have added sys_statx from their first mainline versions.
The current oldest stable branch is v4.14, only reserving sys_statx
still preserves compatibility with all of the supported stable branches,
So, let's remove the old arch related and dependent sys_stat support
completely.
This is friendly to the future new architecture porting.
[1]: https://man7.org/linux/man-pages/man2/statx.2.html
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As gcc doc [1] shows:
Most optimizations are completely disabled at -O0 or if an -O level is
not set on the command line, even if individual optimization flags are
specified.
Test result [2] shows, gcc>=11.1.0 deviates from the above description,
but before gcc 11.1.0, "-O0" still forcely uses frame pointer in the
_start function even if the individual optimize("omit-frame-pointer")
flag is specified.
The frame pointer related operations will change the stack pointer (e.g.
In x86_64, an extra "push %rbp" will be inserted at the beginning of
_start) and make it differs from the one we expected, as a result, break
the whole startup function.
To fix up this issue, as suggested by Thomas, the individual "Os" and
"omit-frame-pointer" optimize flags are used together on _start function
to disable frame pointer completely even if the -O0 is set on the
command line.
[1]: https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
[2]: https://lore.kernel.org/lkml/20230714094723.140603-1-falcon@tinylab.org/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/34b21ba5-7b59-4b3b-9ed6-ef9a3a5e06f7@t-8ch.de/
Fixes: 7f85485896 ("tools/nolibc: make compiler and assembler agree on the section around _start")
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Fix up such errors reported by scripts/checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
#148: FILE: tools/include/nolibc/arch-aarch64.h:148:
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) __no_stack_protector _start(void)
^
ERROR: space required after that ',' (ctx:VxV)
#148: FILE: tools/include/nolibc/arch-aarch64.h:148:
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) __no_stack_protector _start(void)
^
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
In commit 52e423f5b9 ("tools/nolibc: export environ as a weak symbol on i386")
and friends the asm startup logic was extended to directly populate the
"environ" array.
This makes it impossible for "environ" to be dropped by the linker.
Therefore also drop the other logic to handle non-present "environ".
Also add a testcase to validate the initialization of environ.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
a reverse operation of mkdir() is meaningful, add rmdir() here.
required by nolibc-test to remove /proc while CONFIG_PROC_FS is not
enabled.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Both glibc and musl provide RB_ flags via <sys/reboot.h> for reboot(),
they don't need to include <linux/reboot.h>, let nolibc provide RB_
flags too.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Fix up the error reported by scripts/checkpatch.pl:
ERROR: do not use assignment in if condition
#95: FILE: tools/include/nolibc/sys.h:95:
+ if ((ret = sys_brk(0)) && (sys_brk(ret + inc) == ret + inc))
Apply the new generic __sysret() to merge the SET_ERRNO() and return
lines.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Do several cleanups together:
- Since all supported architectures have my_syscall6() now, remove the
#ifdef check.
- Move the mmap() related macros to tools/include/nolibc/types.h and
reuse most of them from <linux/mman.h>
- Apply the new generic __sysret() to convert the calling of sys_map()
to oneline code
Note, since MAP_FAILED is -1 on Linux, so we can use the generic
__sysret() which returns -1 upon error and still satisfy user land that
checks for MAP_FAILED.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702192347.GJ16233@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
No official reference states the errno range, here aligns with musl and
glibc and uses [-MAX_ERRNO, -1] instead of all negative ones.
- musl: src/internal/syscall_ret.c
- glibc: sysdeps/unix/sysv/linux/sysdep.h
The MAX_ERRNO used by musl and glibc is 4095, just like the one nolibc
defined in tools/include/nolibc/errno.h.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZKKdD%2Fp4UkEavru6@1wt.eu/
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Link: https://lore.kernel.org/linux-riscv/94dd5170929f454fbc0a10a2eb3b108d@AcuMS.aculab.com/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is able to pass the 6th argument like the 5th argument via the stack
for mips, let's add a new my_syscall6() now, see [1] for details:
The mips/o32 system call convention passes arguments 5 through 8 on
the user stack.
Both mmap() and pselect6() require my_syscall6().
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
my_syscall<N> share the same long clobber list, define a macro for them.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
my_syscall<N> share the same long clobber list, define a macro for them.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
replace "__asm__ volatile" with "__asm__ volatile" and insert necessary
whitespace before "\" to make sure the lines are aligned.
$ sed -i -e 's/__asm__ volatile ( /__asm__ volatile ( /g' tools/include/nolibc/*.h
Note, arch-s390.h uses post-tab instead of post-whitespaces, must avoid
insert whitespace just before the tabs:
$ sed -i -e 's/__asm__ volatile (\t/__asm__ volatile (\t/g' tools/include/nolibc/arch-*.h
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
More than 8 whitespaces of the code indent are replaced with "tab +
whitespaces" to fix up such errors reported by scripts/checkpatch.pl:
ERROR: code indent should use tabs where possible
#64: FILE: tools/include/nolibc/arch-mips.h:64:
+^I \$
ERROR: code indent should use tabs where possible
#72: FILE: tools/include/nolibc/arch-mips.h:72:
+^I "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \$
This command is used:
$ sed -i -e '/^\t* /{s/ /\t/g}' tools/include/nolibc/arch-*.h
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switching BPF_F_KPROBE_MULTI_RETURN macro to anonymous enum,
so it'd show up in vmlinux.h. There's not functional change
compared to having this as macro.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
