IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add compatibility strings for the internal switch in the Broadcom
Omega SoC family (BCM5831X/BCM1140X) to B53.
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add binding document for a SoC built-in device using MediaTek protocol.
Which could be found on MT7622 SoC or other similar MediaTek SoCs.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Y Soft is headquartered in the Czech Republic and it is a worldwide
provider of enterprise office solutions for print management.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Rob Herring <robh@kernel.org>
In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec
mute control, can also be used for general purpose. It is manipulated by
the GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI
pins can also be set in the same way.
Currently this GRF GPIO controller only supports the mute pin. If needed
in the future, the HDMI pins support can also be added.
Signed-off-by: Levin Du <djw@t-chip.com.cn>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the binding docs for Renesas R-Car M3-N. No driver changes are
needed.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow cooling devices sharing same trip point with same contribution
value to share the cooling map as well. Otherwise the same information
will be duplicated for each device sharing the trip point.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
-----BEGIN PGP SIGNATURE-----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=gKw8
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-08-05
Here's the main bluetooth-next pull request for the 4.19 kernel.
- Added support for Bluetooth Advertising Extensions
- Added vendor driver support to hci_h5 HCI driver
- Added serdev support to hci_h5 driver
- Added support for Qualcomm wcn3990 controller
- Added support for RTL8723BS and RTL8723DS controllers
- btusb: Added new ID for Realtek 8723DE
- Several other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds documentation for the MediaTek Global Command Engine (GCE) unit
found in MT8173 SoCs.
Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Secure Proxy is another communication scheme in Texas Instrument's
devices intended to provide an unique communication path from various
processors in the System on Chip(SoC) to a central System Controller.
Secure proxy is, in effect, an evolution of current generation Message
Manager hardware block found in K2G devices. However the following
changes have taken place:
Secure Proxy instance exposes "threads" or "proxies" which is
primary representation of "a" communication channel. Each thread is
preconfigured by System controller configuration based on SoC usage
requirements. Secure proxy by itself represents a single "queue" of
communication but allows the proxies to be independently operated.
Each Secure proxy thread can uniquely have their own error and threshold
interrupts allowing for more fine control of IRQ handling.
Provide an hardware description of the same for device tree
representation.
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch enables regulators for the Qualcomm Bluetooth wcn3990
controller.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The hip06 and hip07 SoCs contain a number of these crypto units which
accelerate AES and DES operations.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add clock phandle, of the core clock driving the mdio block, as an
optional property to the Broadcom iProc mdio mux.
The clock, when specified, will be used to setup the rate adjust registers
in the mdio to derrive the mdio's operating frequency.
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the base address of the Broadcom iProc MDIO mux driver to
point to the start of the block's register address space.
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate two SP805 binding documents "arm,sp805.txt" and
"sp805-wdt.txt" into "arm,sp805.txt" that matches the naming of the
desired compatible string to be used
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Document support for the Watchdog Timer (WDT) Controller in the Renesas
R-Car E3 (R8A77990) SoC.
No driver update is needed.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use more logical clock names - similar to the names in documentation.
This will allow better handling of the clocks in the driver when support
for more hardware versions is added - equivalent clocks on different
hardware versions will have the same name.
Note: No dts is using this device (and clock names) yet.
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Adding documentation for adgs1408/1409 multiplexer. The bindings
follow the standard SPI and mux bindings and do not require any
additional custom properties.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[peda: reword idle-state to non-array for singular mux controller]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uartlite devicetree binding was missed out.
Add the binding documentation for uartlite that is already in use.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Describe interrupts property in more detail, especially when there are
more than one interrupt.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds SDHI support for the R8A77990 SoC (R-Car E3). No driver changes
needed for anything except HS400 which we will enable separately later.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 59b356ffd0b0 ("mtd: m25p80: restore the status of SPI flash when
exiting") is the latest from a long history of attempts to add reboot
handling to handle stateful addressing modes on SPI flash. Some prior
mostly-related discussions:
http://lists.infradead.org/pipermail/linux-mtd/2013-March/046343.html
[PATCH 1/3] mtd: m25p80: utilize dedicated 4-byte addressing commands
http://lists.infradead.org/pipermail/barebox/2014-September/020682.html
[RFC] MTD m25p80 3-byte addressing and boot problem
http://lists.infradead.org/pipermail/linux-mtd/2015-February/057683.html
[PATCH 2/2] m25p80: if supported put chip to deep power down if not used
Previously, attempts to add reboot-time software reset handling were
rejected, but the latest attempt was not.
Quick summary of the problem:
Some systems (e.g., boot ROM or bootloader) assume that they can read
initial boot code from their SPI flash using 3-byte addressing. If the
flash is left in 4-byte mode after reset, these systems won't boot. The
above patch provided a shutdown/remove hook to attempt to reset the
addressing mode before we reboot. Notably, this patch misses out on
huge classes of unexpected reboots (e.g., crashes, watchdog resets).
Unfortunately, it is essentially impossible to solve this problem 100%:
if your system doesn't know how to reset the SPI flash to power-on
defaults at initialization time, no amount of software can really rescue
you -- there will always be a chance of some unexpected reset that
leaves your flash in an addressing mode that your boot sequence didn't
expect.
While it is not directly harmful to perform hacks like the
aforementioned commit on all 4-byte addressing flash, a
properly-designed system should not need the hack -- and in fact,
providing this hack may mask the fact that a given system is indeed
broken. So this patch attempts to apply this unsound hack more narrowly,
providing a strong suggestion to developers and system designers that
this is truly a hack. With luck, system designers can catch their errors
early on in their development cycle, rather than applying this hack long
term. But apparently enough systems are out in the wild that we still
have to provide this hack.
Document a new device tree property to denote systems that do not have a
proper hardware (or software) reset mechanism, and apply the hack (with
a loud warning) only in this case.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
standard. LEDs and power button for the rk3399 firefly and removal of
some deprecated type-c properties from the rk3399 devicetree.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAltfHXEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgepyB/9HJZvneyadfomxhywbflJ8wkZj4WWfHDNG
79hwcg33EBcP2+vRkTeYypkurmhZdv+sSF6h1sLUBmtFNuapzd7xlI7FW+NAwwgl
6UFU4DtiC2E0b9ljrCL1WQH34BEVpSyaENO7EF1gR8CvZAnb4BzRgzDxfAczbQlH
6uBRzfuHooW/zHrbLxMxzkMbeHlU7m8i3/F2E3Uftxy5/qHUNmFGNcOl0bCpT/i6
gS1QKIBAMmQ6yaNwrwG6GmPPampv2jXGUCNFAlCNkLPjKY0Ri7XdBq0k91sx78YT
bP7k8Qd+TANMZgHB+mHPhgupMDur8KL+hn5I+MO3DItfn3rUW4EL
=0BU+
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
A new board, the Vamrs Ficus using the rk3399 and followin the 96boards
standard. LEDs and power button for the rk3399 firefly and removal of
some deprecated type-c properties from the rk3399 devicetree.
* tag 'v4.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
arm64: dts: rockchip: drop out-of-tree properties from rk3399-ficus regulator
arm64: dts: rockchip: add voltage properties for vcc3v3_pcie on rk3399 ficus
arm64: dts: rockchip: add USB 2.0 and 3.0 support on Ficus board
arm64: dts: rockchip: add 96boards RK3399 Ficus board
dt-bindings: Add vendor prefix for Vamrs Ltd.
Signed-off-by: Olof Johansson <olof@lixom.net>
A bit larger this time around, due to introduction of "dpu1" support
for the display controller in sdm845 and beyond. This has been on
list and undergoing refactoring since Feb (going from ~110kloc to
~30kloc), and all my review complaints have been addressed, so I'd be
happy to see this upstream so further feature work can procede on top
of upstream.
Also includes the gpu coredump support, which should be useful for
debugging gpu crashes. And various other misc fixes and such.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-8y3zguY0Mj1vh=o+vrv_bJ8AwZ96wBXYPvMeQT2XcA@mail.gmail.com
This patch adds bindings for wcd9335 audio codec which can support both SLIMbus
and I2S/I2C interface.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The integration of the Designware SPI controller on Microsemi SoCs requires
an extra register set to be able to give the IP control of the SPI
interface.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are GLINK clients who open the same channel on multiple GLINK
links. These clients need a way to distinguish which remoteproc they
are communicating to. Add a label property to identify the edge this
node represents.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Since handling is abstracted in this driver, we need to add resin entry
in id table along with pwrkey_data.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In order to support resin thru the pwrkey driver (they are very
similar in nature) we need to abstract the handling in this driver.
First we abstract pull_up_bit and status_bit along in driver data.
The event code sent for key events is quiried from DT.
Since the device can be child of pon lookup regmap and reg from
parent if lookup fails (we are child).
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adds bindings for Snapdragon 845 display processing unit
Changes in v2:
- Use SoC specific compatibles for mdss and dpu (Rob Herring)
- Use assigned-clocks to set initial clock frequency (Rob Herring)
Changes in v3 (all suggested by Rob Herring):
- Rename mdss_phys to mdss
- Correct description for clocks/assigned-clocks
- Rename mdp_phys to mdp
- Rename vbif_phys to vbif
- Remove redundant interrupt-parent from mdss_mdp
- Fully specify 'ranges' and use relative reg address in mdss_mdp
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Adds mdp transfer time to msm dsi binding
Changes in v3:
- Added Rob's R-b
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Not a big pull request with only 37 non-merge commits, most of which
are touching dwc2 (74% of the changes).
The most important changes are dwc2's support for uframe scheduling
and its endian-agnostic readl/writel wrappers.
From dwc3 side we have a special new glue layer for Synopsys HAPS
which will help Synopsys running FPGA validation using our upstream
driver. We also have the beginnings of dual-role support for Intel
Merrifield platform.
Apart from these, just a series of non-critical changes.
-----BEGIN PGP SIGNATURE-----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=HiNz
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: changes for v4.19
Not a big pull request with only 37 non-merge commits, most of which
are touching dwc2 (74% of the changes).
The most important changes are dwc2's support for uframe scheduling
and its endian-agnostic readl/writel wrappers.
From dwc3 side we have a special new glue layer for Synopsys HAPS
which will help Synopsys running FPGA validation using our upstream
driver. We also have the beginnings of dual-role support for Intel
Merrifield platform.
Apart from these, just a series of non-critical changes.
Add description of 'snps,incr-burst-type-adjustment' to binding
so that configuring devicetree.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
